Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-23 11:21:33 +00:00
Code Issues Packages Projects Releases Wiki Activity
6b7c0ea212
linux/arch/arm/mach-shmobile/board-kota2.c
Magnus Damm 6b7c0ea212 ARM: mach-shmobile: Kota2 GPIO Keys support 
This patch ties in GPIO Keys support on the Kota2
board. For now the keys are used in polling mode,
but after extending the sh73a0 PFC with IRQ support
we should be able to switch to the IRQ driven driver.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29 16:50:17 +09:00

266 lines
7.5 KiB
C
Raw Blame History

/*
* kota2 board support
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Magnus Damm
* Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com>
* Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/gpio_keys.h>
#include <mach/hardware.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/traps.h>
static struct resource smsc9220_resources[] = {
[0] = {
.start = 0x14000000, /* CS5A */
.end = 0x140000ff, /* A1->A7 */
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(33), /* PINTA2 @ PORT144 */
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config smsc9220_platdata = {
.flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
};
static struct platform_device eth_device = {
.name = "smsc911x",
.id = 0,
.dev = {
.platform_data = &smsc9220_platdata,
},
.resource = smsc9220_resources,
.num_resources = ARRAY_SIZE(smsc9220_resources),
};
static struct sh_keysc_info keysc_platdata = {
.mode = SH_KEYSC_MODE_6,
.scan_timing = 3,
.delay = 100,
.keycodes = {
KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND,
0, 0, 0, 0, 0,
KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9,
0, KEY_DOWN, 0, 0, 0,
KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6,
KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0,
KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3,
0, KEY_UP, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
},
};
static struct resource keysc_resources[] = {
[0] = {
.name = "KEYSC",
.start = 0xe61b0000,
.end = 0xe61b0098 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(71),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device keysc_device = {
.name = "sh_keysc",
.id = 0,
.num_resources = ARRAY_SIZE(keysc_resources),
.resource = keysc_resources,
.dev = {
.platform_data = &keysc_platdata,
},
};
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */
GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */
GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */
GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */
GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */
GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */
GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */
GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */
/* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */
GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */
/* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */
};
static struct gpio_keys_platform_data gpio_key_info = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
.poll_interval = 250, /* polled for now */
};
static struct platform_device gpio_keys_device = {
.name = "gpio-keys-polled", /* polled for now */
.id = -1,
.dev = {
.platform_data = &gpio_key_info,
},
};
static struct platform_device *kota2_devices[] __initdata = {
&eth_device,
&keysc_device,
&gpio_keys_device,
};
static struct map_desc kota2_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
*/
{
.virtual = 0xe6000000,
.pfn = __phys_to_pfn(0xe6000000),
.length = 256 << 20,
.type = MT_DEVICE_NONSHARED
},
};
static void __init kota2_map_io(void)
{
iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc));
/* setup early devices and console here as well */
sh73a0_add_early_devices();
shmobile_setup_console();
}
#define PINTER0A 0xe69000a0
#define PINTCR0A 0xe69000b0
void __init kota2_init_irq(void)
{
sh73a0_init_irq();
/* setup PINT: enable PINTA2 as active low */
__raw_writel(1 << 29, PINTER0A);
__raw_writew(2 << 10, PINTCR0A);
}
static void __init kota2_init(void)
{
sh73a0_pinmux_init();
/* SCIFA2 (UART2) */
gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
/* SMSC911X */
gpio_request(GPIO_FN_D0_NAF0, NULL);
gpio_request(GPIO_FN_D1_NAF1, NULL);
gpio_request(GPIO_FN_D2_NAF2, NULL);
gpio_request(GPIO_FN_D3_NAF3, NULL);
gpio_request(GPIO_FN_D4_NAF4, NULL);
gpio_request(GPIO_FN_D5_NAF5, NULL);
gpio_request(GPIO_FN_D6_NAF6, NULL);
gpio_request(GPIO_FN_D7_NAF7, NULL);
gpio_request(GPIO_FN_D8_NAF8, NULL);
gpio_request(GPIO_FN_D9_NAF9, NULL);
gpio_request(GPIO_FN_D10_NAF10, NULL);
gpio_request(GPIO_FN_D11_NAF11, NULL);
gpio_request(GPIO_FN_D12_NAF12, NULL);
gpio_request(GPIO_FN_D13_NAF13, NULL);
gpio_request(GPIO_FN_D14_NAF14, NULL);
gpio_request(GPIO_FN_D15_NAF15, NULL);
gpio_request(GPIO_FN_CS5A_, NULL);
gpio_request(GPIO_FN_WE0__FWE, NULL);
gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
gpio_direction_input(GPIO_PORT144);
gpio_request(GPIO_PORT145, NULL); /* RESET */
gpio_direction_output(GPIO_PORT145, 1);
/* KEYSC */
gpio_request(GPIO_FN_KEYIN0_PU, NULL);
gpio_request(GPIO_FN_KEYIN1_PU, NULL);
gpio_request(GPIO_FN_KEYIN2_PU, NULL);
gpio_request(GPIO_FN_KEYIN3_PU, NULL);
gpio_request(GPIO_FN_KEYIN4_PU, NULL);
gpio_request(GPIO_FN_KEYIN5_PU, NULL);
gpio_request(GPIO_FN_KEYIN6_PU, NULL);
gpio_request(GPIO_FN_KEYIN7_PU, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
gpio_request(GPIO_FN_KEYOUT3, NULL);
gpio_request(GPIO_FN_KEYOUT4, NULL);
gpio_request(GPIO_FN_KEYOUT5, NULL);
gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
gpio_request(GPIO_FN_KEYOUT8, NULL);
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff);
#endif
sh73a0_add_standard_devices();
platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
}
static void __init kota2_timer_init(void)
{
sh73a0_clock_init();
shmobile_timer.init();
return;
}
struct sys_timer kota2_timer = {
.init = kota2_timer_init,
};
MACHINE_START(KOTA2, "kota2")
.map_io = kota2_map_io,
.init_irq = kota2_init_irq,
.handle_irq = shmobile_handle_irq_gic,
.init_machine = kota2_init,
.timer = &kota2_timer,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink