mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 13:22:23 +00:00
9948004986
Add a new compatible string for PXA1928 GPIO controller. The IP block is same as prior chips with a 6th bank added. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
70 lines
2.1 KiB
Plaintext
70 lines
2.1 KiB
Plaintext
* Marvell PXA GPIO controller
|
|
|
|
Required properties:
|
|
- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
|
|
"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
|
|
"marvell,pxa93x-gpio", "marvell,mmp-gpio",
|
|
"marvell,mmp2-gpio" or marvell,pxa1928-gpio.
|
|
- reg : Address and length of the register set for the device
|
|
- interrupts : Should be the port interrupt shared by all gpio pins.
|
|
There're three gpio interrupts in arch-pxa, and they're gpio0,
|
|
gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
|
|
gpio_mux.
|
|
- interrupt-names : Should be the names of irq resources. Each interrupt
|
|
uses its own interrupt name, so there should be as many interrupt names
|
|
as referenced interrups.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- #interrupt-cells: Specifies the number of cells needed to encode an
|
|
interrupt source.
|
|
- gpio-controller : Marks the device node as a gpio controller.
|
|
- #gpio-cells : Should be one. It is the pin number.
|
|
|
|
Example for a MMP platform:
|
|
|
|
gpio: gpio@d4019000 {
|
|
compatible = "marvell,mmp-gpio";
|
|
reg = <0xd4019000 0x1000>;
|
|
interrupts = <49>;
|
|
interrupt-names = "gpio_mux";
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
Example for a PXA3xx platform:
|
|
|
|
gpio: gpio@40e00000 {
|
|
compatible = "intel,pxa3xx-gpio";
|
|
reg = <0x40e00000 0x10000>;
|
|
interrupt-names = "gpio0", "gpio1", "gpio_mux";
|
|
interrupts = <8 9 10>;
|
|
gpio-controller;
|
|
#gpio-cells = <0x2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <0x2>;
|
|
};
|
|
|
|
* Marvell Orion GPIO Controller
|
|
|
|
Required properties:
|
|
- compatible : Should be "marvell,orion-gpio"
|
|
- reg : Address and length of the register set for controller.
|
|
- gpio-controller : So we know this is a gpio controller.
|
|
- ngpio : How many gpios this controller has.
|
|
- interrupts : Up to 4 Interrupts for the controller.
|
|
|
|
Optional properties:
|
|
- mask-offset : For SMP Orions, offset for Nth CPU
|
|
|
|
Example:
|
|
|
|
gpio0: gpio@10100 {
|
|
compatible = "marvell,orion-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0x10100 0x40>;
|
|
ngpio = <32>;
|
|
interrupts = <35>, <36>, <37>, <38>;
|
|
};
|