linux/arch/powerpc/platforms/powernv/pci.h
Gavin Shan fe7e85c6f5 powerpc/powernv: Override dma_get_required_mask()
The dma_get_required_mask() function is used by some drivers to
query the platform about what DMA mask is needed to cover all of
memory. This is a bit of a strange semantic when we have to choose
between IOMMU translation or bypass, but essentially what it means
is "what DMA mask will give best performances".

Currently, our IOMMU backend always returns a 32-bit mask here, we
don't do anything special to it when we have bypass available. This
causes some drivers to choose a 32-bit mask, thus losing the ability
to use the bypass window, thinking this is more efficient. The problem
was reported from the driver of following device:

0004:03:00.0 0107: 1000:0087 (rev 05)
0004:03:00.0 Serial Attached SCSI controller: LSI Logic / Symbios \
             Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)

This patch adds an override of that function in order to, instead,
return a 64-bit mask whenever a bypass window is available in order
for drivers to prefer this configuration.

Reported-by: Murali N. Iyer <mniyer@us.ibm.com>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30 17:15:20 +10:00

238 lines
6.3 KiB
C

#ifndef __POWERNV_PCI_H
#define __POWERNV_PCI_H
struct pci_dn;
enum pnv_phb_type {
PNV_PHB_P5IOC2 = 0,
PNV_PHB_IODA1 = 1,
PNV_PHB_IODA2 = 2,
};
/* Precise PHB model for error management */
enum pnv_phb_model {
PNV_PHB_MODEL_UNKNOWN,
PNV_PHB_MODEL_P5IOC2,
PNV_PHB_MODEL_P7IOC,
PNV_PHB_MODEL_PHB3,
};
#define PNV_PCI_DIAG_BUF_SIZE 8192
#define PNV_IODA_PE_DEV (1 << 0) /* PE has single PCI device */
#define PNV_IODA_PE_BUS (1 << 1) /* PE has primary PCI bus */
#define PNV_IODA_PE_BUS_ALL (1 << 2) /* PE has subordinate buses */
#define PNV_IODA_PE_MASTER (1 << 3) /* Master PE in compound case */
#define PNV_IODA_PE_SLAVE (1 << 4) /* Slave PE in compound case */
/* Data associated with a PE, including IOMMU tracking etc.. */
struct pnv_phb;
struct pnv_ioda_pe {
unsigned long flags;
struct pnv_phb *phb;
/* A PE can be associated with a single device or an
* entire bus (& children). In the former case, pdev
* is populated, in the later case, pbus is.
*/
struct pci_dev *pdev;
struct pci_bus *pbus;
/* Effective RID (device RID for a device PE and base bus
* RID with devfn 0 for a bus PE)
*/
unsigned int rid;
/* PE number */
unsigned int pe_number;
/* "Weight" assigned to the PE for the sake of DMA resource
* allocations
*/
unsigned int dma_weight;
/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
int tce32_seg;
int tce32_segcount;
struct iommu_table tce32_table;
phys_addr_t tce_inval_reg_phys;
/* 64-bit TCE bypass region */
bool tce_bypass_enabled;
uint64_t tce_bypass_base;
/* MSIs. MVE index is identical for for 32 and 64 bit MSI
* and -1 if not supported. (It's actually identical to the
* PE number)
*/
int mve_number;
/* PEs in compound case */
struct pnv_ioda_pe *master;
struct list_head slaves;
/* Link in list of PE#s */
struct list_head dma_link;
struct list_head list;
};
/* IOC dependent EEH operations */
#ifdef CONFIG_EEH
struct pnv_eeh_ops {
int (*post_init)(struct pci_controller *hose);
int (*set_option)(struct eeh_pe *pe, int option);
int (*get_state)(struct eeh_pe *pe);
int (*reset)(struct eeh_pe *pe, int option);
int (*get_log)(struct eeh_pe *pe, int severity,
char *drv_log, unsigned long len);
int (*configure_bridge)(struct eeh_pe *pe);
int (*err_inject)(struct eeh_pe *pe, int type, int func,
unsigned long addr, unsigned long mask);
int (*next_error)(struct eeh_pe **pe);
};
#endif /* CONFIG_EEH */
#define PNV_PHB_FLAG_EEH (1 << 0)
struct pnv_phb {
struct pci_controller *hose;
enum pnv_phb_type type;
enum pnv_phb_model model;
u64 hub_id;
u64 opal_id;
int flags;
void __iomem *regs;
int initialized;
spinlock_t lock;
#ifdef CONFIG_EEH
struct pnv_eeh_ops *eeh_ops;
#endif
#ifdef CONFIG_DEBUG_FS
int has_dbgfs;
struct dentry *dbgfs;
#endif
#ifdef CONFIG_PCI_MSI
unsigned int msi_base;
unsigned int msi32_support;
struct msi_bitmap msi_bmp;
#endif
int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev,
unsigned int hwirq, unsigned int virq,
unsigned int is_64, struct msi_msg *msg);
void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
int (*dma_set_mask)(struct pnv_phb *phb, struct pci_dev *pdev,
u64 dma_mask);
u64 (*dma_get_required_mask)(struct pnv_phb *phb,
struct pci_dev *pdev);
void (*fixup_phb)(struct pci_controller *hose);
u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
void (*shutdown)(struct pnv_phb *phb);
int (*init_m64)(struct pnv_phb *phb);
void (*alloc_m64_pe)(struct pnv_phb *phb);
int (*pick_m64_pe)(struct pnv_phb *phb, struct pci_bus *bus, int all);
int (*get_pe_state)(struct pnv_phb *phb, int pe_no);
void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt);
union {
struct {
struct iommu_table iommu_table;
} p5ioc2;
struct {
/* Global bridge info */
unsigned int total_pe;
unsigned int reserved_pe;
/* 32-bit MMIO window */
unsigned int m32_size;
unsigned int m32_segsize;
unsigned int m32_pci_base;
/* 64-bit MMIO window */
unsigned int m64_bar_idx;
unsigned long m64_size;
unsigned long m64_segsize;
unsigned long m64_base;
unsigned long m64_bar_alloc;
/* IO ports */
unsigned int io_size;
unsigned int io_segsize;
unsigned int io_pci_base;
/* PE allocation bitmap */
unsigned long *pe_alloc;
/* M32 & IO segment maps */
unsigned int *m32_segmap;
unsigned int *io_segmap;
struct pnv_ioda_pe *pe_array;
/* IRQ chip */
int irq_chip_init;
struct irq_chip irq_chip;
/* Sorted list of used PE's based
* on the sequence of creation
*/
struct list_head pe_list;
/* Reverse map of PEs, will have to extend if
* we are to support more than 256 PEs, indexed
* bus { bus, devfn }
*/
unsigned char pe_rmap[0x10000];
/* 32-bit TCE tables allocation */
unsigned long tce32_count;
/* Total "weight" for the sake of DMA resources
* allocation
*/
unsigned int dma_weight;
unsigned int dma_pe_count;
/* Sorted list of used PE's, sorted at
* boot for resource allocation purposes
*/
struct list_head pe_dma_list;
} ioda;
};
/* PHB and hub status structure */
union {
unsigned char blob[PNV_PCI_DIAG_BUF_SIZE];
struct OpalIoP7IOCPhbErrorData p7ioc;
struct OpalIoPhb3ErrorData phb3;
struct OpalIoP7IOCErrorData hub_diag;
} diag;
};
extern struct pci_ops pnv_pci_ops;
#ifdef CONFIG_EEH
extern struct pnv_eeh_ops ioda_eeh_ops;
#endif
void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
unsigned char *log_buff);
int pnv_pci_cfg_read(struct device_node *dn,
int where, int size, u32 *val);
int pnv_pci_cfg_write(struct device_node *dn,
int where, int size, u32 val);
extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
void *tce_mem, u64 tce_size,
u64 dma_offset, unsigned page_shift);
extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
extern void pnv_pci_init_ioda_hub(struct device_node *np);
extern void pnv_pci_init_ioda2_phb(struct device_node *np);
extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
__be64 *startp, __be64 *endp, bool rm);
extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
extern int ioda_eeh_phb_reset(struct pci_controller *hose, int option);
#endif /* __POWERNV_PCI_H */