Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-22 19:01:37 +00:00
Code Issues Packages Projects Releases Wiki Activity
69c7f4618c
linux/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
Linus Torvalds 916f562fb2 This round of clk driver and framework updates is heavy on the driver update 
side. The two main highlights in the core framework are the addition of an bulk
 clk_get API that handles optional clks and an extra debugfs file that tells the
 developer about the current parent of a clk.
 
 The driver updates are dominated by i.MX in the diffstat, but that is mostly
 because that SoC has started converting to the clk_hw style of clk
 registration. The next big update is in the Amlogic meson clk driver that
 gained some support for audio, cpu, and temperature clks while fixing some PLL
 issues. Finally, the biggest thing that stands out is the conversion of a large
 part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
 less strings and more pointer comparisons to match clk parents and children up.
 
 In general, it looks like we have a lot of little fixes and tweaks here and
 there to clk data along with the normal addition of a handful of new drivers
 and a couple new core framework features.
 
 Core:
  - Add a 'clk_parent' file in clk debugfs
  - Add a clk_bulk_get_optional() API (with devm too)
 
 New Drivers:
  - Support gated clk controller on MIPS based BCM63XX SoCs
  - Support SiLabs Si5341 and Si5340 chips
  - Support for CPU clks on Raspberry Pi devices
  - Audsys clock driver for MediaTek MT8516 SoCs
 
 Updates:
  - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
  - Small frequency support for SiLabs Si544 chips
  - Slow clk support for AT91 SAM9X60 SoCs
  - Remove dead code in various clk drivers (-Wunused)
  - Support for Marvell 98DX1135 SoCs
  - Get duty cycle of generic pwm clks
  - Improvement in mmc phase calculation and cleanup of some rate defintions
  - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
  - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
  - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
  - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
  - Add clks for new Exynos5422 Dynamic Memory Controller driver
  - Clock definition for Exynos4412 Mali
  - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
  - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
  - TI clock probing done from DT by default instead of firmware
  - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
  - Add Amlogic meson8 audio clocks
  - Add Amlogic g12a temperature sensors clocks
  - Add Amlogic g12a and g12b cpu clocks
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
  - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
  - Add Clock Domain support on Renesas RZ/N1
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY
 hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/
 tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN
 lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu
 Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w
 F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb
 UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l
 VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9
 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF
 AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p
 FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd
 O2zWCGffeYs=
 =mK0C
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...
2019-07-17 10:07:48 -07:00

958 lines
30 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016 Maxime Ripard. All rights reserved.
*/
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nk.h"
#include "ccu_nkm.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu_phase.h"
#include "ccu-sun50i-a64.h"
static struct ccu_nkmp pll_cpux_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT(4, 2),
.m = _SUNXI_CCU_DIV(0, 2),
.p = _SUNXI_CCU_DIV_MAX(16, 2, 4),
.common = {
.reg = 0x000,
.hw.init = CLK_HW_INIT("pll-cpux",
"osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
* the base (2x, 4x and 8x), and one variable divider (the one true
* pll audio).
*
* With sigma-delta modulation for fractional-N on the audio PLL,
* we have to use specific dividers. This means the variable divider
* can no longer be used, as the audio codec requests the exact clock
* rates we support through this mechanism. So we now hard code the
* variable divider to 1. This means the clock rates will no longer
* match the clock names.
*/
#define SUN50I_A64_PLL_AUDIO_REG 0x008
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
{ .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 },
{ .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 },
};
static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
"osc24M", 0x008,
8, 7, /* N */
0, 5, /* M */
pll_audio_sdm_table, BIT(24),
0x284, BIT(31),
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video0_clk, "pll-video0",
"osc24M", 0x010,
192000000, /* Minimum rate */
1008000000, /* Maximum rate */
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
"osc24M", 0x018,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
"osc24M", 0x020,
8, 5, /* N */
4, 2, /* K */
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static struct ccu_nk pll_periph0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.fixed_post_div = 2,
.common = {
.reg = 0x028,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
&ccu_nk_ops, CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nk pll_periph1_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 5),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.fixed_post_div = 2,
.common = {
.reg = 0x02c,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
&ccu_nk_ops, CLK_SET_RATE_UNGATE),
},
};
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video1_clk, "pll-video1",
"osc24M", 0x030,
192000000, /* Minimum rate */
1008000000, /* Maximum rate */
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
"osc24M", 0x038,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
/*
* The output function can be changed to something more complex that
* we do not handle yet.
*
* Hardcode the mode so that we don't fall in that case.
*/
#define SUN50I_A64_PLL_MIPI_REG 0x040
static struct ccu_nkm pll_mipi_clk = {
/*
* The bit 23 and 22 are called "LDO{1,2}_EN" on the SoC's
* user manual, and by experiments the PLL doesn't work without
* these bits toggled.
*/
.enable = BIT(31) | BIT(23) | BIT(22),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT(8, 4),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.m = _SUNXI_CCU_DIV(0, 4),
.common = {
.reg = 0x040,
.hw.init = CLK_HW_INIT("pll-mipi", "pll-video0",
&ccu_nkm_ops, CLK_SET_RATE_UNGATE),
},
};
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic",
"osc24M", 0x044,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
"osc24M", 0x048,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
"osc24M", 0x04c,
8, 7, /* N */
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
static const char * const cpux_parents[] = { "osc32k", "osc24M",
"pll-cpux", "pll-cpux" };
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
0x050, 16, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
static const char * const ahb1_parents[] = { "osc32k", "osc24M",
"axi", "pll-periph0" };
static const struct ccu_mux_var_prediv ahb1_predivs[] = {
{ .index = 3, .shift = 6, .width = 2 },
};
static struct ccu_div ahb1_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = {
.shift = 12,
.width = 2,
.var_predivs = ahb1_predivs,
.n_var_predivs = ARRAY_SIZE(ahb1_predivs),
},
.common = {
.reg = 0x054,
.features = CCU_FEATURE_VARIABLE_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("ahb1",
ahb1_parents,
&ccu_div_ops,
0),
},
};
static struct clk_div_table apb1_div_table[] = {
{ .val = 0, .div = 2 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 4 },
{ .val = 3, .div = 8 },
{ /* Sentinel */ },
};
static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
0x054, 8, 2, apb1_div_table, 0);
static const char * const apb2_parents[] = { "osc32k", "osc24M",
"pll-periph0-2x",
"pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
0, 5, /* M */
16, 2, /* P */
24, 2, /* mux */
0);
static const char * const ahb2_parents[] = { "ahb1", "pll-periph0" };
static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
{ .index = 1, .div = 2 },
};
static struct ccu_mux ahb2_clk = {
.mux = {
.shift = 0,
.width = 1,
.fixed_predivs = ahb2_fixed_predivs,
.n_predivs = ARRAY_SIZE(ahb2_fixed_predivs),
},
.common = {
.reg = 0x05c,
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("ahb2",
ahb2_parents,
&ccu_mux_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
0x060, BIT(1), 0);
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
0x060, BIT(5), 0);
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
0x060, BIT(6), 0);
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
0x060, BIT(8), 0);
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
0x060, BIT(9), 0);
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
0x060, BIT(10), 0);
static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
0x060, BIT(13), 0);
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
0x060, BIT(14), 0);
static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2",
0x060, BIT(17), 0);
static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
0x060, BIT(18), 0);
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
0x060, BIT(19), 0);
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
0x060, BIT(20), 0);
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
0x060, BIT(21), 0);
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
0x060, BIT(23), 0);
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
0x060, BIT(24), 0);
static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb2",
0x060, BIT(25), 0);
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
0x060, BIT(28), 0);
static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb2",
0x060, BIT(29), 0);
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
0x064, BIT(0), 0);
static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
0x064, BIT(3), 0);
static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
0x064, BIT(4), 0);
static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
0x064, BIT(5), 0);
static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1",
0x064, BIT(8), 0);
static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
0x064, BIT(11), 0);
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
0x064, BIT(12), 0);
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
0x064, BIT(20), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
0x064, BIT(21), 0);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
0x064, BIT(22), 0);
static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
0x068, BIT(0), 0);
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
0x068, BIT(1), 0);
static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
0x068, BIT(5), 0);
static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
0x068, BIT(8), 0);
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
0x068, BIT(12), 0);
static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
0x068, BIT(13), 0);
static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
0x068, BIT(14), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
0x06c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
0x06c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
0x06c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
0x06c, BIT(5), 0);
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
0x06c, BIT(16), 0);
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
0x06c, BIT(17), 0);
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
0x06c, BIT(18), 0);
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
0x06c, BIT(19), 0);
static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
0x06c, BIT(20), 0);
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
0x070, BIT(7), 0);
static struct clk_div_table ths_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 4 },
{ .val = 3, .div = 6 },
};
static const char * const ths_parents[] = { "osc24M" };
static struct ccu_div ths_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_TABLE(0, 2, ths_div_table),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0x074,
.hw.init = CLK_HW_INIT_PARENTS("ths",
ths_parents,
&ccu_div_ops,
0),
},
};
static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
"pll-periph1" };
static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
/*
* MMC clocks are the new timing mode (see A83T & H3) variety, but without
* the mode switch. This means they have a 2x post divider between the clock
* and the MMC module. This is not documented in the manual, but is taken
* into consideration when setting the mmc module clocks in the BSP kernel.
* Without it, MMC performance is degraded.
*
* We model it here to be consistent with other SoCs supporting this mode.
* The alternative would be to add the 2x multiplier when setting the MMC
* module clock in the MMC driver, just for the A64.
*/
static const char * const mmc_default_parents[] = { "osc24M", "pll-periph0-2x",
"pll-periph1-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0",
mmc_default_parents, 0x088,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1",
mmc_default_parents, 0x08c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2",
mmc_default_parents, 0x090,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
0);
static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mmc_default_parents, 0x09c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
"pll-audio-2x", "pll-audio" };
static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
0x0cc, BIT(8), 0);
static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
0x0cc, BIT(9), 0);
static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic",
0x0cc, BIT(10), 0);
static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M",
0x0cc, BIT(11), 0);
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M",
0x0cc, BIT(16), 0);
static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "usb-ohci0",
0x0cc, BIT(17), 0);
static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
0x100, BIT(0), 0);
static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram",
0x100, BIT(1), 0);
static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
0x100, BIT(2), 0);
static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
0x100, BIT(3), 0);
static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
0x104, 0, 4, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
static const u8 tcon0_table[] = { 0, 2, };
static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
tcon0_table, 0x118, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
static const u8 tcon1_table[] = { 0, 2, };
static struct ccu_div tcon1_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV(0, 4),
.mux = _SUNXI_CCU_MUX_TABLE(24, 2, tcon1_table),
.common = {
.reg = 0x11c,
.hw.init = CLK_HW_INIT_PARENTS("tcon1",
tcon1_parents,
&ccu_div_ops,
CLK_SET_RATE_PARENT),
},
};
static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
0x124, 0, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M",
0x130, BIT(31), 0);
static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
0x134, 16, 4, 24, 3, BIT(31), 0);
static const char * const csi_mclk_parents[] = { "osc24M", "pll-video1", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents,
0x134, 0, 5, 8, 3, BIT(15), 0);
static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
0x13c, 16, 3, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
0x140, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(ac_dig_4x_clk, "ac-dig-4x", "pll-audio-4x",
0x140, BIT(30), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
0x144, BIT(31), 0);
static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
0x150, 0, 4, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M",
0x154, BIT(31), 0);
static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
"pll-ddr0", "pll-ddr1" };
static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-periph0" };
static const u8 dsi_dphy_table[] = { 0, 2, };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy",
dsi_dphy_parents, dsi_dphy_table,
0x168, 0, 4, 8, 2, BIT(15), CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT);
/* Fixed Factor clocks */
static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
static const struct clk_hw *clk_parent_pll_audio[] = {
&pll_audio_base_clk.common.hw
};
/* We hardcode the divider to 1 for now */
static CLK_FIXED_FACTOR_HWS(pll_audio_clk, "pll-audio",
clk_parent_pll_audio,
1, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
clk_parent_pll_audio,
2, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
clk_parent_pll_audio,
1, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_8x_clk, "pll-audio-8x",
clk_parent_pll_audio,
1, 2, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
&pll_periph0_clk.common.hw,
1, 2, 0);
static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x",
&pll_periph1_clk.common.hw,
1, 2, 0);
static CLK_FIXED_FACTOR_HW(pll_video0_2x_clk, "pll-video0-2x",
&pll_video0_clk.common.hw,
1, 2, CLK_SET_RATE_PARENT);
static struct ccu_common *sun50i_a64_ccu_clks[] = {
&pll_cpux_clk.common,
&pll_audio_base_clk.common,
&pll_video0_clk.common,
&pll_ve_clk.common,
&pll_ddr0_clk.common,
&pll_periph0_clk.common,
&pll_periph1_clk.common,
&pll_video1_clk.common,
&pll_gpu_clk.common,
&pll_mipi_clk.common,
&pll_hsic_clk.common,
&pll_de_clk.common,
&pll_ddr1_clk.common,
&cpux_clk.common,
&axi_clk.common,
&ahb1_clk.common,
&apb1_clk.common,
&apb2_clk.common,
&ahb2_clk.common,
&bus_mipi_dsi_clk.common,
&bus_ce_clk.common,
&bus_dma_clk.common,
&bus_mmc0_clk.common,
&bus_mmc1_clk.common,
&bus_mmc2_clk.common,
&bus_nand_clk.common,
&bus_dram_clk.common,
&bus_emac_clk.common,
&bus_ts_clk.common,
&bus_hstimer_clk.common,
&bus_spi0_clk.common,
&bus_spi1_clk.common,
&bus_otg_clk.common,
&bus_ehci0_clk.common,
&bus_ehci1_clk.common,
&bus_ohci0_clk.common,
&bus_ohci1_clk.common,
&bus_ve_clk.common,
&bus_tcon0_clk.common,
&bus_tcon1_clk.common,
&bus_deinterlace_clk.common,
&bus_csi_clk.common,
&bus_hdmi_clk.common,
&bus_de_clk.common,
&bus_gpu_clk.common,
&bus_msgbox_clk.common,
&bus_spinlock_clk.common,
&bus_codec_clk.common,
&bus_spdif_clk.common,
&bus_pio_clk.common,
&bus_ths_clk.common,
&bus_i2s0_clk.common,
&bus_i2s1_clk.common,
&bus_i2s2_clk.common,
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_i2c2_clk.common,
&bus_scr_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
&bus_uart4_clk.common,
&bus_dbg_clk.common,
&ths_clk.common,
&nand_clk.common,
&mmc0_clk.common,
&mmc1_clk.common,
&mmc2_clk.common,
&ts_clk.common,
&ce_clk.common,
&spi0_clk.common,
&spi1_clk.common,
&i2s0_clk.common,
&i2s1_clk.common,
&i2s2_clk.common,
&spdif_clk.common,
&usb_phy0_clk.common,
&usb_phy1_clk.common,
&usb_hsic_clk.common,
&usb_hsic_12m_clk.common,
&usb_ohci0_clk.common,
&usb_ohci1_clk.common,
&dram_clk.common,
&dram_ve_clk.common,
&dram_csi_clk.common,
&dram_deinterlace_clk.common,
&dram_ts_clk.common,
&de_clk.common,
&tcon0_clk.common,
&tcon1_clk.common,
&deinterlace_clk.common,
&csi_misc_clk.common,
&csi_sclk_clk.common,
&csi_mclk_clk.common,
&ve_clk.common,
&ac_dig_clk.common,
&ac_dig_4x_clk.common,
&avs_clk.common,
&hdmi_clk.common,
&hdmi_ddc_clk.common,
&mbus_clk.common,
&dsi_dphy_clk.common,
&gpu_clk.common,
};
static struct clk_hw_onecell_data sun50i_a64_hw_clks = {
.hws = {
[CLK_OSC_12M] = &osc12M_clk.hw,
[CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
[CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.hw,
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
[CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
[CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
[CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
[CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
[CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
[CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
[CLK_PLL_DE] = &pll_de_clk.common.hw,
[CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
[CLK_CPUX] = &cpux_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_AHB1] = &ahb1_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_AHB2] = &ahb2_clk.common.hw,
[CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
[CLK_BUS_TS] = &bus_ts_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
[CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
[CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
[CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
[CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
[CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
[CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
[CLK_BUS_PIO] = &bus_pio_clk.common.hw,
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
[CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
[CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
[CLK_BUS_SCR] = &bus_scr_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_THS] = &ths_clk.common.hw,
[CLK_NAND] = &nand_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_TS] = &ts_clk.common.hw,
[CLK_CE] = &ce_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_SPI1] = &spi1_clk.common.hw,
[CLK_I2S0] = &i2s0_clk.common.hw,
[CLK_I2S1] = &i2s1_clk.common.hw,
[CLK_I2S2] = &i2s2_clk.common.hw,
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
[CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
[CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
[CLK_DRAM] = &dram_clk.common.hw,
[CLK_DRAM_VE] = &dram_ve_clk.common.hw,
[CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
[CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
[CLK_DRAM_TS] = &dram_ts_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_TCON0] = &tcon0_clk.common.hw,
[CLK_TCON1] = &tcon1_clk.common.hw,
[CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
[CLK_CSI_MISC] = &csi_misc_clk.common.hw,
[CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
[CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_AC_DIG] = &ac_dig_clk.common.hw,
[CLK_AC_DIG_4X] = &ac_dig_4x_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_HDMI] = &hdmi_clk.common.hw,
[CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw,
[CLK_GPU] = &gpu_clk.common.hw,
},
.num = CLK_NUMBER,
};
static struct ccu_reset_map sun50i_a64_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
[RST_USB_PHY1] = { 0x0cc, BIT(1) },
[RST_USB_HSIC] = { 0x0cc, BIT(2) },
[RST_DRAM] = { 0x0f4, BIT(31) },
[RST_MBUS] = { 0x0fc, BIT(31) },
[RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
[RST_BUS_CE] = { 0x2c0, BIT(5) },
[RST_BUS_DMA] = { 0x2c0, BIT(6) },
[RST_BUS_MMC0] = { 0x2c0, BIT(8) },
[RST_BUS_MMC1] = { 0x2c0, BIT(9) },
[RST_BUS_MMC2] = { 0x2c0, BIT(10) },
[RST_BUS_NAND] = { 0x2c0, BIT(13) },
[RST_BUS_DRAM] = { 0x2c0, BIT(14) },
[RST_BUS_EMAC] = { 0x2c0, BIT(17) },
[RST_BUS_TS] = { 0x2c0, BIT(18) },
[RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
[RST_BUS_SPI0] = { 0x2c0, BIT(20) },
[RST_BUS_SPI1] = { 0x2c0, BIT(21) },
[RST_BUS_OTG] = { 0x2c0, BIT(23) },
[RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
[RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
[RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
[RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
[RST_BUS_VE] = { 0x2c4, BIT(0) },
[RST_BUS_TCON0] = { 0x2c4, BIT(3) },
[RST_BUS_TCON1] = { 0x2c4, BIT(4) },
[RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
[RST_BUS_CSI] = { 0x2c4, BIT(8) },
[RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
[RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
[RST_BUS_DE] = { 0x2c4, BIT(12) },
[RST_BUS_GPU] = { 0x2c4, BIT(20) },
[RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
[RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
[RST_BUS_DBG] = { 0x2c4, BIT(31) },
[RST_BUS_LVDS] = { 0x2c8, BIT(0) },
[RST_BUS_CODEC] = { 0x2d0, BIT(0) },
[RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
[RST_BUS_THS] = { 0x2d0, BIT(8) },
[RST_BUS_I2S0] = { 0x2d0, BIT(12) },
[RST_BUS_I2S1] = { 0x2d0, BIT(13) },
[RST_BUS_I2S2] = { 0x2d0, BIT(14) },
[RST_BUS_I2C0] = { 0x2d8, BIT(0) },
[RST_BUS_I2C1] = { 0x2d8, BIT(1) },
[RST_BUS_I2C2] = { 0x2d8, BIT(2) },
[RST_BUS_SCR] = { 0x2d8, BIT(5) },
[RST_BUS_UART0] = { 0x2d8, BIT(16) },
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
[RST_BUS_UART3] = { 0x2d8, BIT(19) },
[RST_BUS_UART4] = { 0x2d8, BIT(20) },
};
static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
.ccu_clks = sun50i_a64_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun50i_a64_ccu_clks),
.hw_clks = &sun50i_a64_hw_clks,
.resets = sun50i_a64_ccu_resets,
.num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets),
};
static int sun50i_a64_ccu_probe(struct platform_device *pdev)
{
struct resource *res;
void __iomem *reg;
u32 val;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(reg))
return PTR_ERR(reg);
/* Force the PLL-Audio-1x divider to 1 */
val = readl(reg + SUN50I_A64_PLL_AUDIO_REG);
val &= ~GENMASK(19, 16);
writel(val | (0 << 16), reg + SUN50I_A64_PLL_AUDIO_REG);
writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
}
static const struct of_device_id sun50i_a64_ccu_ids[] = {
{ .compatible = "allwinner,sun50i-a64-ccu" },
{ }
};
static struct platform_driver sun50i_a64_ccu_driver = {
.probe = sun50i_a64_ccu_probe,
.driver = {
.name = "sun50i-a64-ccu",
.of_match_table = sun50i_a64_ccu_ids,
},
};
builtin_platform_driver(sun50i_a64_ccu_driver);
Reference in New Issue View Git Blame Copy Permalink