linux/drivers/input/joystick/turbografx.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

325 lines
7.9 KiB
C

/*
* Copyright (c) 1998-2001 Vojtech Pavlik
*
* Based on the work of:
* Steffen Schwenke
*/
/*
* TurboGraFX parallel port interface driver for Linux.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/kernel.h>
#include <linux/parport.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/slab.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("TurboGraFX parallel port interface driver");
MODULE_LICENSE("GPL");
#define TGFX_MAX_PORTS 3
#define TGFX_MAX_DEVICES 7
struct tgfx_config {
int args[TGFX_MAX_DEVICES + 1];
unsigned int nargs;
};
static struct tgfx_config tgfx_cfg[TGFX_MAX_PORTS] __initdata;
module_param_array_named(map, tgfx_cfg[0].args, int, &tgfx_cfg[0].nargs, 0);
MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<js1>,<js2>,..<js7>");
module_param_array_named(map2, tgfx_cfg[1].args, int, &tgfx_cfg[1].nargs, 0);
MODULE_PARM_DESC(map2, "Describes second set of devices");
module_param_array_named(map3, tgfx_cfg[2].args, int, &tgfx_cfg[2].nargs, 0);
MODULE_PARM_DESC(map3, "Describes third set of devices");
#define TGFX_REFRESH_TIME HZ/100 /* 10 ms */
#define TGFX_TRIGGER 0x08
#define TGFX_UP 0x10
#define TGFX_DOWN 0x20
#define TGFX_LEFT 0x40
#define TGFX_RIGHT 0x80
#define TGFX_THUMB 0x02
#define TGFX_THUMB2 0x04
#define TGFX_TOP 0x01
#define TGFX_TOP2 0x08
static int tgfx_buttons[] = { BTN_TRIGGER, BTN_THUMB, BTN_THUMB2, BTN_TOP, BTN_TOP2 };
static struct tgfx {
struct pardevice *pd;
struct timer_list timer;
struct input_dev *dev[TGFX_MAX_DEVICES];
char name[TGFX_MAX_DEVICES][64];
char phys[TGFX_MAX_DEVICES][32];
int sticks;
int used;
struct mutex sem;
} *tgfx_base[TGFX_MAX_PORTS];
/*
* tgfx_timer() reads and analyzes TurboGraFX joystick data.
*/
static void tgfx_timer(unsigned long private)
{
struct tgfx *tgfx = (void *) private;
struct input_dev *dev;
int data1, data2, i;
for (i = 0; i < 7; i++)
if (tgfx->sticks & (1 << i)) {
dev = tgfx->dev[i];
parport_write_data(tgfx->pd->port, ~(1 << i));
data1 = parport_read_status(tgfx->pd->port) ^ 0x7f;
data2 = parport_read_control(tgfx->pd->port) ^ 0x04; /* CAVEAT parport */
input_report_abs(dev, ABS_X, !!(data1 & TGFX_RIGHT) - !!(data1 & TGFX_LEFT));
input_report_abs(dev, ABS_Y, !!(data1 & TGFX_DOWN ) - !!(data1 & TGFX_UP ));
input_report_key(dev, BTN_TRIGGER, (data1 & TGFX_TRIGGER));
input_report_key(dev, BTN_THUMB, (data2 & TGFX_THUMB ));
input_report_key(dev, BTN_THUMB2, (data2 & TGFX_THUMB2 ));
input_report_key(dev, BTN_TOP, (data2 & TGFX_TOP ));
input_report_key(dev, BTN_TOP2, (data2 & TGFX_TOP2 ));
input_sync(dev);
}
mod_timer(&tgfx->timer, jiffies + TGFX_REFRESH_TIME);
}
static int tgfx_open(struct input_dev *dev)
{
struct tgfx *tgfx = input_get_drvdata(dev);
int err;
err = mutex_lock_interruptible(&tgfx->sem);
if (err)
return err;
if (!tgfx->used++) {
parport_claim(tgfx->pd);
parport_write_control(tgfx->pd->port, 0x04);
mod_timer(&tgfx->timer, jiffies + TGFX_REFRESH_TIME);
}
mutex_unlock(&tgfx->sem);
return 0;
}
static void tgfx_close(struct input_dev *dev)
{
struct tgfx *tgfx = input_get_drvdata(dev);
mutex_lock(&tgfx->sem);
if (!--tgfx->used) {
del_timer_sync(&tgfx->timer);
parport_write_control(tgfx->pd->port, 0x00);
parport_release(tgfx->pd);
}
mutex_unlock(&tgfx->sem);
}
/*
* tgfx_probe() probes for tg gamepads.
*/
static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
{
struct tgfx *tgfx;
struct input_dev *input_dev;
struct parport *pp;
struct pardevice *pd;
int i, j;
int err;
pp = parport_find_number(parport);
if (!pp) {
printk(KERN_ERR "turbografx.c: no such parport\n");
err = -EINVAL;
goto err_out;
}
pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
if (!pd) {
printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n");
err = -EBUSY;
goto err_put_pp;
}
tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL);
if (!tgfx) {
printk(KERN_ERR "turbografx.c: Not enough memory\n");
err = -ENOMEM;
goto err_unreg_pardev;
}
mutex_init(&tgfx->sem);
tgfx->pd = pd;
init_timer(&tgfx->timer);
tgfx->timer.data = (long) tgfx;
tgfx->timer.function = tgfx_timer;
for (i = 0; i < n_devs; i++) {
if (n_buttons[i] < 1)
continue;
if (n_buttons[i] > 6) {
printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]);
err = -EINVAL;
goto err_unreg_devs;
}
tgfx->dev[i] = input_dev = input_allocate_device();
if (!input_dev) {
printk(KERN_ERR "turbografx.c: Not enough memory for input device\n");
err = -ENOMEM;
goto err_unreg_devs;
}
tgfx->sticks |= (1 << i);
snprintf(tgfx->name[i], sizeof(tgfx->name[i]),
"TurboGraFX %d-button Multisystem joystick", n_buttons[i]);
snprintf(tgfx->phys[i], sizeof(tgfx->phys[i]),
"%s/input%d", tgfx->pd->port->name, i);
input_dev->name = tgfx->name[i];
input_dev->phys = tgfx->phys[i];
input_dev->id.bustype = BUS_PARPORT;
input_dev->id.vendor = 0x0003;
input_dev->id.product = n_buttons[i];
input_dev->id.version = 0x0100;
input_set_drvdata(input_dev, tgfx);
input_dev->open = tgfx_open;
input_dev->close = tgfx_close;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0);
input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0);
for (j = 0; j < n_buttons[i]; j++)
set_bit(tgfx_buttons[j], input_dev->keybit);
err = input_register_device(tgfx->dev[i]);
if (err)
goto err_free_dev;
}
if (!tgfx->sticks) {
printk(KERN_ERR "turbografx.c: No valid devices specified\n");
err = -EINVAL;
goto err_free_tgfx;
}
return tgfx;
err_free_dev:
input_free_device(tgfx->dev[i]);
err_unreg_devs:
while (--i >= 0)
if (tgfx->dev[i])
input_unregister_device(tgfx->dev[i]);
err_free_tgfx:
kfree(tgfx);
err_unreg_pardev:
parport_unregister_device(pd);
err_put_pp:
parport_put_port(pp);
err_out:
return ERR_PTR(err);
}
static void tgfx_remove(struct tgfx *tgfx)
{
int i;
for (i = 0; i < TGFX_MAX_DEVICES; i++)
if (tgfx->dev[i])
input_unregister_device(tgfx->dev[i]);
parport_unregister_device(tgfx->pd);
kfree(tgfx);
}
static int __init tgfx_init(void)
{
int i;
int have_dev = 0;
int err = 0;
for (i = 0; i < TGFX_MAX_PORTS; i++) {
if (tgfx_cfg[i].nargs == 0 || tgfx_cfg[i].args[0] < 0)
continue;
if (tgfx_cfg[i].nargs < 2) {
printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
err = -EINVAL;
break;
}
tgfx_base[i] = tgfx_probe(tgfx_cfg[i].args[0],
tgfx_cfg[i].args + 1,
tgfx_cfg[i].nargs - 1);
if (IS_ERR(tgfx_base[i])) {
err = PTR_ERR(tgfx_base[i]);
break;
}
have_dev = 1;
}
if (err) {
while (--i >= 0)
if (tgfx_base[i])
tgfx_remove(tgfx_base[i]);
return err;
}
return have_dev ? 0 : -ENODEV;
}
static void __exit tgfx_exit(void)
{
int i;
for (i = 0; i < TGFX_MAX_PORTS; i++)
if (tgfx_base[i])
tgfx_remove(tgfx_base[i]);
}
module_init(tgfx_init);
module_exit(tgfx_exit);