mirror of
https://github.com/torvalds/linux.git
synced 2024-12-18 09:02:17 +00:00
0d19208e70
The anatop regulators are SoC internal LDO regulators usually supplied by an external PMIC. This patch adds support for specifying the supply from the device tree using the vin-supply property. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
39 lines
1.2 KiB
Plaintext
39 lines
1.2 KiB
Plaintext
Anatop Voltage regulators
|
|
|
|
Required properties:
|
|
- compatible: Must be "fsl,anatop-regulator"
|
|
- anatop-reg-offset: Anatop MFD register offset
|
|
- anatop-vol-bit-shift: Bit shift for the register
|
|
- anatop-vol-bit-width: Number of bits used in the register
|
|
- anatop-min-bit-val: Minimum value of this register
|
|
- anatop-min-voltage: Minimum voltage of this regulator
|
|
- anatop-max-voltage: Maximum voltage of this regulator
|
|
|
|
Optional properties:
|
|
- anatop-delay-reg-offset: Anatop MFD step time register offset
|
|
- anatop-delay-bit-shift: Bit shift for the step time register
|
|
- anatop-delay-bit-width: Number of bits used in the step time register
|
|
- vin-supply: The supply for this regulator
|
|
|
|
Any property defined as part of the core regulator
|
|
binding, defined in regulator.txt, can also be used.
|
|
|
|
Example:
|
|
|
|
regulator-vddpu {
|
|
compatible = "fsl,anatop-regulator";
|
|
regulator-name = "vddpu";
|
|
regulator-min-microvolt = <725000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
anatop-reg-offset = <0x140>;
|
|
anatop-vol-bit-shift = <9>;
|
|
anatop-vol-bit-width = <5>;
|
|
anatop-delay-reg-offset = <0x170>;
|
|
anatop-delay-bit-shift = <24>;
|
|
anatop-delay-bit-width = <2>;
|
|
anatop-min-bit-val = <1>;
|
|
anatop-min-voltage = <725000>;
|
|
anatop-max-voltage = <1300000>;
|
|
};
|