mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 20:01:55 +00:00
4c18be2bf5
Add support for Freescale T2080/T2081 QDS Development System Board. The T2080QDS Development System is a high-performance computing, evaluation, and development platform that supports T2080 QorIQ Power Architecture processor, with following major features: T2080QDS feature overview: Processor: - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz Memory: - Single memory controller capable of supporting DDR3 and DDR3-LP - Dual DIMM slots up 2133MT/s with ECC Ethernet interfaces: - Two 1Gbps RGMII on-board ports - Four 10Gbps XFI on-board cages - 1Gbps/2.5Gbps SGMII Riser card - 10Gbps XAUI Riser card Accelerator: - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC SerDes: - 16 lanes up to 10.3125GHz - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI IFC: - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA eSPI: - Three SPI flash (16MB N25Q128A + 8MB EN25S64 + 512KB SST25WF040) USB: - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB) PCIE: - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0, SR-IOV) SATA: - Two SATA 2.0 ports on-board SRIO: - Two Serial RapidIO 2.0 ports up to 5 GHz eSDHC: - Supports SD/MMC/eMMC Card DMA: - Three 8-channels DMA controllers I2C: - Four I2C controllers. UART: - Dual 4-pins UART serial ports System Logic: - QIXIS-II FPGA system controll T2081QDS board shares the same PCB with T1040QDS with some differences. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
240 lines
5.8 KiB
Plaintext
240 lines
5.8 KiB
Plaintext
/*
|
|
* T2080/T2081 QDS Device Tree Source
|
|
*
|
|
* Copyright 2013 Freescale Semiconductor Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* * Neither the name of Freescale Semiconductor nor the
|
|
* names of its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
*
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") as published by the Free Software
|
|
* Foundation, either version 2 of that License or (at your option) any
|
|
* later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/ {
|
|
model = "fsl,T2080QDS";
|
|
compatible = "fsl,T2080QDS";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
ifc: localbus@ffe124000 {
|
|
reg = <0xf 0xfe124000 0 0x2000>;
|
|
ranges = <0 0 0xf 0xe8000000 0x08000000
|
|
2 0 0xf 0xff800000 0x00010000
|
|
3 0 0xf 0xffdf0000 0x00008000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x8000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
};
|
|
|
|
nand@2,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,ifc-nand";
|
|
reg = <0x2 0x0 0x10000>;
|
|
};
|
|
|
|
boardctrl: board-control@3,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,fpga-qixis";
|
|
reg = <3 0 0x300>;
|
|
ranges = <0 3 0 0x300>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
dcsr: dcsr@f00000000 {
|
|
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
|
|
};
|
|
|
|
soc: soc@ffe000000 {
|
|
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
|
reg = <0xf 0xfe000000 0 0x00001000>;
|
|
spi@110000 {
|
|
flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "micron,n25q128a11"; /* 16MB */
|
|
reg = <0>;
|
|
spi-max-frequency = <40000000>; /* input clock */
|
|
};
|
|
|
|
flash@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "sst,sst25wf040";
|
|
reg = <1>;
|
|
spi-max-frequency = <35000000>;
|
|
};
|
|
|
|
flash@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "eon,en25s64";
|
|
reg = <2>;
|
|
spi-max-frequency = <35000000>;
|
|
};
|
|
};
|
|
|
|
i2c@118000 {
|
|
pca9547@77 {
|
|
compatible = "nxp,pca9547";
|
|
reg = <0x77>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0>;
|
|
|
|
eeprom@50 {
|
|
compatible = "at24,24c512";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
eeprom@51 {
|
|
compatible = "at24,24c02";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
eeprom@57 {
|
|
compatible = "at24,24c02";
|
|
reg = <0x57>;
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds3232";
|
|
reg = <0x68>;
|
|
interrupts = <0x1 0x1 0 0>;
|
|
};
|
|
};
|
|
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x1>;
|
|
|
|
eeprom@55 {
|
|
compatible = "at24,24c02";
|
|
reg = <0x55>;
|
|
};
|
|
};
|
|
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2>;
|
|
|
|
ina220@40 {
|
|
compatible = "ti,ina220";
|
|
reg = <0x40>;
|
|
shunt-resistor = <1000>;
|
|
};
|
|
|
|
ina220@41 {
|
|
compatible = "ti,ina220";
|
|
reg = <0x41>;
|
|
shunt-resistor = <1000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
sdhc@114000 {
|
|
voltage-ranges = <1800 1800 3300 3300>;
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe240000 {
|
|
reg = <0xf 0xfe240000 0 0x10000>;
|
|
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
|
|
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
|
|
pcie@0 {
|
|
ranges = <0x02000000 0 0xe0000000
|
|
0x02000000 0 0xe0000000
|
|
0 0x20000000
|
|
|
|
0x01000000 0 0x00000000
|
|
0x01000000 0 0x00000000
|
|
0 0x00010000>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@ffe250000 {
|
|
reg = <0xf 0xfe250000 0 0x10000>;
|
|
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
|
|
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
|
|
pcie@0 {
|
|
ranges = <0x02000000 0 0xe0000000
|
|
0x02000000 0 0xe0000000
|
|
0 0x20000000
|
|
|
|
0x01000000 0 0x00000000
|
|
0x01000000 0 0x00000000
|
|
0 0x00010000>;
|
|
};
|
|
};
|
|
|
|
pci2: pcie@ffe260000 {
|
|
reg = <0xf 0xfe260000 0 0x1000>;
|
|
ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
|
|
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
|
|
pcie@0 {
|
|
ranges = <0x02000000 0 0xe0000000
|
|
0x02000000 0 0xe0000000
|
|
0 0x20000000
|
|
|
|
0x01000000 0 0x00000000
|
|
0x01000000 0 0x00000000
|
|
0 0x00010000>;
|
|
};
|
|
};
|
|
|
|
pci3: pcie@ffe270000 {
|
|
reg = <0xf 0xfe270000 0 0x10000>;
|
|
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
|
|
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
|
|
pcie@0 {
|
|
ranges = <0x02000000 0 0xe0000000
|
|
0x02000000 0 0xe0000000
|
|
0 0x20000000
|
|
|
|
0x01000000 0 0x00000000
|
|
0x01000000 0 0x00000000
|
|
0 0x00010000>;
|
|
};
|
|
};
|
|
};
|