mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 18:41:23 +00:00
04b8695617
One variant of the SX150X GPIO chip supports setting the pins in open drain mode. This is currently available to set from platform data, but completely unused in the kernel. Activate the new .set_single_ended() callback so users can set this up from e.g. device tree or board files using the new GPIO descriptors. As part of this, delete the platform data open drain setting method. Cc: Wei Chen <Wei.Chen@csr.com> Cc: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
795 lines
20 KiB
C
795 lines
20 KiB
C
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
|
|
*
|
|
* Driver for Semtech SX150X I2C GPIO Expanders
|
|
*
|
|
* Author: Gregory Bean <gbean@codeaurora.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#define NO_UPDATE_PENDING -1
|
|
|
|
/* The chip models of sx150x */
|
|
#define SX150X_123 0
|
|
#define SX150X_456 1
|
|
#define SX150X_789 2
|
|
|
|
struct sx150x_123_pri {
|
|
u8 reg_pld_mode;
|
|
u8 reg_pld_table0;
|
|
u8 reg_pld_table1;
|
|
u8 reg_pld_table2;
|
|
u8 reg_pld_table3;
|
|
u8 reg_pld_table4;
|
|
u8 reg_advance;
|
|
};
|
|
|
|
struct sx150x_456_pri {
|
|
u8 reg_pld_mode;
|
|
u8 reg_pld_table0;
|
|
u8 reg_pld_table1;
|
|
u8 reg_pld_table2;
|
|
u8 reg_pld_table3;
|
|
u8 reg_pld_table4;
|
|
u8 reg_advance;
|
|
};
|
|
|
|
struct sx150x_789_pri {
|
|
u8 reg_drain;
|
|
u8 reg_polarity;
|
|
u8 reg_clock;
|
|
u8 reg_misc;
|
|
u8 reg_reset;
|
|
u8 ngpios;
|
|
};
|
|
|
|
struct sx150x_device_data {
|
|
u8 model;
|
|
u8 reg_pullup;
|
|
u8 reg_pulldn;
|
|
u8 reg_dir;
|
|
u8 reg_data;
|
|
u8 reg_irq_mask;
|
|
u8 reg_irq_src;
|
|
u8 reg_sense;
|
|
u8 ngpios;
|
|
union {
|
|
struct sx150x_123_pri x123;
|
|
struct sx150x_456_pri x456;
|
|
struct sx150x_789_pri x789;
|
|
} pri;
|
|
};
|
|
|
|
/**
|
|
* struct sx150x_platform_data - config data for SX150x driver
|
|
* @gpio_base: The index number of the first GPIO assigned to this
|
|
* GPIO expander. The expander will create a block of
|
|
* consecutively numbered gpios beginning at the given base,
|
|
* with the size of the block depending on the model of the
|
|
* expander chip.
|
|
* @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO
|
|
* instead of as an oscillator, increasing the size of the
|
|
* GP(I)O pool created by this expander by one. The
|
|
* output-only GPO pin will be added at the end of the block.
|
|
* @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor
|
|
* for each IO line in the expander. Setting the bit at
|
|
* position n will enable the pull-up for the IO at
|
|
* the corresponding offset. For chips with fewer than
|
|
* 16 IO pins, high-end bits are ignored.
|
|
* @io_pulldn_ena: A bit-mask which enables-or disables the pull-down
|
|
* resistor for each IO line in the expander. Setting the
|
|
* bit at position n will enable the pull-down for the IO at
|
|
* the corresponding offset. For chips with fewer than
|
|
* 16 IO pins, high-end bits are ignored.
|
|
* @io_polarity: A bit-mask which enables polarity inversion for each IO line
|
|
* in the expander. Setting the bit at position n inverts
|
|
* the polarity of that IO line, while clearing it results
|
|
* in normal polarity. For chips with fewer than 16 IO pins,
|
|
* high-end bits are ignored.
|
|
* @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line
|
|
* is connected, via which it reports interrupt events
|
|
* across all GPIO lines. This must be a real,
|
|
* pre-existing IRQ line.
|
|
* Setting this value < 0 disables the irq_chip functionality
|
|
* of the driver.
|
|
* @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based
|
|
* IRQ lines will appear. Similarly to gpio_base, the expander
|
|
* will create a block of irqs beginning at this number.
|
|
* This value is ignored if irq_summary is < 0.
|
|
* @reset_during_probe: If set to true, the driver will trigger a full
|
|
* reset of the chip at the beginning of the probe
|
|
* in order to place it in a known state.
|
|
*/
|
|
struct sx150x_platform_data {
|
|
unsigned gpio_base;
|
|
bool oscio_is_gpo;
|
|
u16 io_pullup_ena;
|
|
u16 io_pulldn_ena;
|
|
u16 io_polarity;
|
|
int irq_summary;
|
|
unsigned irq_base;
|
|
bool reset_during_probe;
|
|
};
|
|
|
|
struct sx150x_chip {
|
|
struct gpio_chip gpio_chip;
|
|
struct i2c_client *client;
|
|
const struct sx150x_device_data *dev_cfg;
|
|
int irq_summary;
|
|
int irq_base;
|
|
int irq_update;
|
|
u32 irq_sense;
|
|
u32 irq_masked;
|
|
u32 dev_sense;
|
|
u32 dev_masked;
|
|
struct irq_chip irq_chip;
|
|
struct mutex lock;
|
|
};
|
|
|
|
static const struct sx150x_device_data sx150x_devices[] = {
|
|
[0] = { /* sx1508q */
|
|
.model = SX150X_789,
|
|
.reg_pullup = 0x03,
|
|
.reg_pulldn = 0x04,
|
|
.reg_dir = 0x07,
|
|
.reg_data = 0x08,
|
|
.reg_irq_mask = 0x09,
|
|
.reg_irq_src = 0x0c,
|
|
.reg_sense = 0x0b,
|
|
.pri.x789 = {
|
|
.reg_drain = 0x05,
|
|
.reg_polarity = 0x06,
|
|
.reg_clock = 0x0f,
|
|
.reg_misc = 0x10,
|
|
.reg_reset = 0x7d,
|
|
},
|
|
.ngpios = 8,
|
|
},
|
|
[1] = { /* sx1509q */
|
|
.model = SX150X_789,
|
|
.reg_pullup = 0x07,
|
|
.reg_pulldn = 0x09,
|
|
.reg_dir = 0x0f,
|
|
.reg_data = 0x11,
|
|
.reg_irq_mask = 0x13,
|
|
.reg_irq_src = 0x19,
|
|
.reg_sense = 0x17,
|
|
.pri.x789 = {
|
|
.reg_drain = 0x0b,
|
|
.reg_polarity = 0x0d,
|
|
.reg_clock = 0x1e,
|
|
.reg_misc = 0x1f,
|
|
.reg_reset = 0x7d,
|
|
},
|
|
.ngpios = 16
|
|
},
|
|
[2] = { /* sx1506q */
|
|
.model = SX150X_456,
|
|
.reg_pullup = 0x05,
|
|
.reg_pulldn = 0x07,
|
|
.reg_dir = 0x03,
|
|
.reg_data = 0x01,
|
|
.reg_irq_mask = 0x09,
|
|
.reg_irq_src = 0x0f,
|
|
.reg_sense = 0x0d,
|
|
.pri.x456 = {
|
|
.reg_pld_mode = 0x21,
|
|
.reg_pld_table0 = 0x23,
|
|
.reg_pld_table1 = 0x25,
|
|
.reg_pld_table2 = 0x27,
|
|
.reg_pld_table3 = 0x29,
|
|
.reg_pld_table4 = 0x2b,
|
|
.reg_advance = 0xad,
|
|
},
|
|
.ngpios = 16
|
|
},
|
|
[3] = { /* sx1502q */
|
|
.model = SX150X_123,
|
|
.reg_pullup = 0x02,
|
|
.reg_pulldn = 0x03,
|
|
.reg_dir = 0x01,
|
|
.reg_data = 0x00,
|
|
.reg_irq_mask = 0x05,
|
|
.reg_irq_src = 0x08,
|
|
.reg_sense = 0x07,
|
|
.pri.x123 = {
|
|
.reg_pld_mode = 0x10,
|
|
.reg_pld_table0 = 0x11,
|
|
.reg_pld_table1 = 0x12,
|
|
.reg_pld_table2 = 0x13,
|
|
.reg_pld_table3 = 0x14,
|
|
.reg_pld_table4 = 0x15,
|
|
.reg_advance = 0xad,
|
|
},
|
|
.ngpios = 8,
|
|
},
|
|
};
|
|
|
|
static const struct i2c_device_id sx150x_id[] = {
|
|
{"sx1508q", 0},
|
|
{"sx1509q", 1},
|
|
{"sx1506q", 2},
|
|
{"sx1502q", 3},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sx150x_id);
|
|
|
|
static const struct of_device_id sx150x_of_match[] = {
|
|
{ .compatible = "semtech,sx1508q" },
|
|
{ .compatible = "semtech,sx1509q" },
|
|
{ .compatible = "semtech,sx1506q" },
|
|
{ .compatible = "semtech,sx1502q" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sx150x_of_match);
|
|
|
|
static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
|
|
{
|
|
s32 err = i2c_smbus_write_byte_data(client, reg, val);
|
|
|
|
if (err < 0)
|
|
dev_warn(&client->dev,
|
|
"i2c write fail: can't write %02x to %02x: %d\n",
|
|
val, reg, err);
|
|
return err;
|
|
}
|
|
|
|
static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
|
|
{
|
|
s32 err = i2c_smbus_read_byte_data(client, reg);
|
|
|
|
if (err >= 0)
|
|
*val = err;
|
|
else
|
|
dev_warn(&client->dev,
|
|
"i2c read fail: can't read from %02x: %d\n",
|
|
reg, err);
|
|
return err;
|
|
}
|
|
|
|
static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset)
|
|
{
|
|
return (chip->dev_cfg->ngpios == offset);
|
|
}
|
|
|
|
/*
|
|
* These utility functions solve the common problem of locating and setting
|
|
* configuration bits. Configuration bits are grouped into registers
|
|
* whose indexes increase downwards. For example, with eight-bit registers,
|
|
* sixteen gpios would have their config bits grouped in the following order:
|
|
* REGISTER N-1 [ f e d c b a 9 8 ]
|
|
* N [ 7 6 5 4 3 2 1 0 ]
|
|
*
|
|
* For multi-bit configurations, the pattern gets wider:
|
|
* REGISTER N-3 [ f f e e d d c c ]
|
|
* N-2 [ b b a a 9 9 8 8 ]
|
|
* N-1 [ 7 7 6 6 5 5 4 4 ]
|
|
* N [ 3 3 2 2 1 1 0 0 ]
|
|
*
|
|
* Given the address of the starting register 'N', the index of the gpio
|
|
* whose configuration we seek to change, and the width in bits of that
|
|
* configuration, these functions allow us to locate the correct
|
|
* register and mask the correct bits.
|
|
*/
|
|
static inline void sx150x_find_cfg(u8 offset, u8 width,
|
|
u8 *reg, u8 *mask, u8 *shift)
|
|
{
|
|
*reg -= offset * width / 8;
|
|
*mask = (1 << width) - 1;
|
|
*shift = (offset * width) % 8;
|
|
*mask <<= *shift;
|
|
}
|
|
|
|
static s32 sx150x_write_cfg(struct sx150x_chip *chip,
|
|
u8 offset, u8 width, u8 reg, u8 val)
|
|
{
|
|
u8 mask;
|
|
u8 data;
|
|
u8 shift;
|
|
s32 err;
|
|
|
|
sx150x_find_cfg(offset, width, ®, &mask, &shift);
|
|
err = sx150x_i2c_read(chip->client, reg, &data);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
data &= ~mask;
|
|
data |= (val << shift) & mask;
|
|
return sx150x_i2c_write(chip->client, reg, data);
|
|
}
|
|
|
|
static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
|
|
{
|
|
u8 reg = chip->dev_cfg->reg_data;
|
|
u8 mask;
|
|
u8 data;
|
|
u8 shift;
|
|
s32 err;
|
|
|
|
sx150x_find_cfg(offset, 1, ®, &mask, &shift);
|
|
err = sx150x_i2c_read(chip->client, reg, &data);
|
|
if (err >= 0)
|
|
err = (data & mask) != 0 ? 1 : 0;
|
|
|
|
return err;
|
|
}
|
|
|
|
static void sx150x_set_oscio(struct sx150x_chip *chip, int val)
|
|
{
|
|
sx150x_i2c_write(chip->client,
|
|
chip->dev_cfg->pri.x789.reg_clock,
|
|
(val ? 0x1f : 0x10));
|
|
}
|
|
|
|
static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val)
|
|
{
|
|
sx150x_write_cfg(chip,
|
|
offset,
|
|
1,
|
|
chip->dev_cfg->reg_data,
|
|
(val ? 1 : 0));
|
|
}
|
|
|
|
static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset)
|
|
{
|
|
return sx150x_write_cfg(chip,
|
|
offset,
|
|
1,
|
|
chip->dev_cfg->reg_dir,
|
|
1);
|
|
}
|
|
|
|
static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val)
|
|
{
|
|
int err;
|
|
|
|
err = sx150x_write_cfg(chip,
|
|
offset,
|
|
1,
|
|
chip->dev_cfg->reg_data,
|
|
(val ? 1 : 0));
|
|
if (err >= 0)
|
|
err = sx150x_write_cfg(chip,
|
|
offset,
|
|
1,
|
|
chip->dev_cfg->reg_dir,
|
|
0);
|
|
return err;
|
|
}
|
|
|
|
static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(gc);
|
|
int status = -EINVAL;
|
|
|
|
if (!offset_is_oscio(chip, offset)) {
|
|
mutex_lock(&chip->lock);
|
|
status = sx150x_get_io(chip, offset);
|
|
mutex_unlock(&chip->lock);
|
|
}
|
|
|
|
return (status < 0) ? status : !!status;
|
|
}
|
|
|
|
static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(gc);
|
|
|
|
mutex_lock(&chip->lock);
|
|
if (offset_is_oscio(chip, offset))
|
|
sx150x_set_oscio(chip, val);
|
|
else
|
|
sx150x_set_io(chip, offset, val);
|
|
mutex_unlock(&chip->lock);
|
|
}
|
|
|
|
static int sx150x_gpio_set_single_ended(struct gpio_chip *gc,
|
|
unsigned offset,
|
|
enum single_ended_mode mode)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(gc);
|
|
|
|
/* On the SX160X 789 we can set open drain */
|
|
if (chip->dev_cfg->model != SX150X_789)
|
|
return -ENOTSUPP;
|
|
|
|
if (mode == LINE_MODE_PUSH_PULL)
|
|
return sx150x_write_cfg(chip,
|
|
offset,
|
|
1,
|
|
chip->dev_cfg->pri.x789.reg_drain,
|
|
0);
|
|
|
|
if (mode == LINE_MODE_OPEN_DRAIN)
|
|
return sx150x_write_cfg(chip,
|
|
offset,
|
|
1,
|
|
chip->dev_cfg->pri.x789.reg_drain,
|
|
1);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(gc);
|
|
int status = -EINVAL;
|
|
|
|
if (!offset_is_oscio(chip, offset)) {
|
|
mutex_lock(&chip->lock);
|
|
status = sx150x_io_input(chip, offset);
|
|
mutex_unlock(&chip->lock);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int sx150x_gpio_direction_output(struct gpio_chip *gc,
|
|
unsigned offset,
|
|
int val)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(gc);
|
|
int status = 0;
|
|
|
|
if (!offset_is_oscio(chip, offset)) {
|
|
mutex_lock(&chip->lock);
|
|
status = sx150x_io_output(chip, offset, val);
|
|
mutex_unlock(&chip->lock);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static void sx150x_irq_mask(struct irq_data *d)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
|
|
unsigned n = d->hwirq;
|
|
|
|
chip->irq_masked |= (1 << n);
|
|
chip->irq_update = n;
|
|
}
|
|
|
|
static void sx150x_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
|
|
unsigned n = d->hwirq;
|
|
|
|
chip->irq_masked &= ~(1 << n);
|
|
chip->irq_update = n;
|
|
}
|
|
|
|
static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
|
|
unsigned n, val = 0;
|
|
|
|
if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
|
|
return -EINVAL;
|
|
|
|
n = d->hwirq;
|
|
|
|
if (flow_type & IRQ_TYPE_EDGE_RISING)
|
|
val |= 0x1;
|
|
if (flow_type & IRQ_TYPE_EDGE_FALLING)
|
|
val |= 0x2;
|
|
|
|
chip->irq_sense &= ~(3UL << (n * 2));
|
|
chip->irq_sense |= val << (n * 2);
|
|
chip->irq_update = n;
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
|
|
{
|
|
struct sx150x_chip *chip = (struct sx150x_chip *)dev_id;
|
|
unsigned nhandled = 0;
|
|
unsigned sub_irq;
|
|
unsigned n;
|
|
s32 err;
|
|
u8 val;
|
|
int i;
|
|
|
|
for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) {
|
|
err = sx150x_i2c_read(chip->client,
|
|
chip->dev_cfg->reg_irq_src - i,
|
|
&val);
|
|
if (err < 0)
|
|
continue;
|
|
|
|
sx150x_i2c_write(chip->client,
|
|
chip->dev_cfg->reg_irq_src - i,
|
|
val);
|
|
for (n = 0; n < 8; ++n) {
|
|
if (val & (1 << n)) {
|
|
sub_irq = irq_find_mapping(
|
|
chip->gpio_chip.irqdomain,
|
|
(i * 8) + n);
|
|
handle_nested_irq(sub_irq);
|
|
++nhandled;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
|
|
}
|
|
|
|
static void sx150x_irq_bus_lock(struct irq_data *d)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
|
|
|
|
mutex_lock(&chip->lock);
|
|
}
|
|
|
|
static void sx150x_irq_bus_sync_unlock(struct irq_data *d)
|
|
{
|
|
struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
|
|
unsigned n;
|
|
|
|
if (chip->irq_update == NO_UPDATE_PENDING)
|
|
goto out;
|
|
|
|
n = chip->irq_update;
|
|
chip->irq_update = NO_UPDATE_PENDING;
|
|
|
|
/* Avoid updates if nothing changed */
|
|
if (chip->dev_sense == chip->irq_sense &&
|
|
chip->dev_masked == chip->irq_masked)
|
|
goto out;
|
|
|
|
chip->dev_sense = chip->irq_sense;
|
|
chip->dev_masked = chip->irq_masked;
|
|
|
|
if (chip->irq_masked & (1 << n)) {
|
|
sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1);
|
|
sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0);
|
|
} else {
|
|
sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0);
|
|
sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense,
|
|
chip->irq_sense >> (n * 2));
|
|
}
|
|
out:
|
|
mutex_unlock(&chip->lock);
|
|
}
|
|
|
|
static void sx150x_init_chip(struct sx150x_chip *chip,
|
|
struct i2c_client *client,
|
|
kernel_ulong_t driver_data,
|
|
struct sx150x_platform_data *pdata)
|
|
{
|
|
mutex_init(&chip->lock);
|
|
|
|
chip->client = client;
|
|
chip->dev_cfg = &sx150x_devices[driver_data];
|
|
chip->gpio_chip.parent = &client->dev;
|
|
chip->gpio_chip.label = client->name;
|
|
chip->gpio_chip.direction_input = sx150x_gpio_direction_input;
|
|
chip->gpio_chip.direction_output = sx150x_gpio_direction_output;
|
|
chip->gpio_chip.get = sx150x_gpio_get;
|
|
chip->gpio_chip.set = sx150x_gpio_set;
|
|
chip->gpio_chip.set_single_ended = sx150x_gpio_set_single_ended;
|
|
chip->gpio_chip.base = pdata->gpio_base;
|
|
chip->gpio_chip.can_sleep = true;
|
|
chip->gpio_chip.ngpio = chip->dev_cfg->ngpios;
|
|
#ifdef CONFIG_OF_GPIO
|
|
chip->gpio_chip.of_node = client->dev.of_node;
|
|
chip->gpio_chip.of_gpio_n_cells = 2;
|
|
#endif
|
|
if (pdata->oscio_is_gpo)
|
|
++chip->gpio_chip.ngpio;
|
|
|
|
chip->irq_chip.name = client->name;
|
|
chip->irq_chip.irq_mask = sx150x_irq_mask;
|
|
chip->irq_chip.irq_unmask = sx150x_irq_unmask;
|
|
chip->irq_chip.irq_set_type = sx150x_irq_set_type;
|
|
chip->irq_chip.irq_bus_lock = sx150x_irq_bus_lock;
|
|
chip->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock;
|
|
chip->irq_summary = -1;
|
|
chip->irq_base = -1;
|
|
chip->irq_masked = ~0;
|
|
chip->irq_sense = 0;
|
|
chip->dev_masked = ~0;
|
|
chip->dev_sense = 0;
|
|
chip->irq_update = NO_UPDATE_PENDING;
|
|
}
|
|
|
|
static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
|
|
{
|
|
int err = 0;
|
|
unsigned n;
|
|
|
|
for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n)
|
|
err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8));
|
|
return err;
|
|
}
|
|
|
|
static int sx150x_reset(struct sx150x_chip *chip)
|
|
{
|
|
int err;
|
|
|
|
err = i2c_smbus_write_byte_data(chip->client,
|
|
chip->dev_cfg->pri.x789.reg_reset,
|
|
0x12);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = i2c_smbus_write_byte_data(chip->client,
|
|
chip->dev_cfg->pri.x789.reg_reset,
|
|
0x34);
|
|
return err;
|
|
}
|
|
|
|
static int sx150x_init_hw(struct sx150x_chip *chip,
|
|
struct sx150x_platform_data *pdata)
|
|
{
|
|
int err = 0;
|
|
|
|
if (pdata->reset_during_probe) {
|
|
err = sx150x_reset(chip);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
if (chip->dev_cfg->model == SX150X_789)
|
|
err = sx150x_i2c_write(chip->client,
|
|
chip->dev_cfg->pri.x789.reg_misc,
|
|
0x01);
|
|
else if (chip->dev_cfg->model == SX150X_456)
|
|
err = sx150x_i2c_write(chip->client,
|
|
chip->dev_cfg->pri.x456.reg_advance,
|
|
0x04);
|
|
else
|
|
err = sx150x_i2c_write(chip->client,
|
|
chip->dev_cfg->pri.x123.reg_advance,
|
|
0x00);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup,
|
|
pdata->io_pullup_ena);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn,
|
|
pdata->io_pulldn_ena);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (chip->dev_cfg->model == SX150X_789) {
|
|
err = sx150x_init_io(chip,
|
|
chip->dev_cfg->pri.x789.reg_polarity,
|
|
pdata->io_polarity);
|
|
if (err < 0)
|
|
return err;
|
|
} else if (chip->dev_cfg->model == SX150X_456) {
|
|
/* Set all pins to work in normal mode */
|
|
err = sx150x_init_io(chip,
|
|
chip->dev_cfg->pri.x456.reg_pld_mode,
|
|
0);
|
|
if (err < 0)
|
|
return err;
|
|
} else {
|
|
/* Set all pins to work in normal mode */
|
|
err = sx150x_init_io(chip,
|
|
chip->dev_cfg->pri.x123.reg_pld_mode,
|
|
0);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
|
|
if (pdata->oscio_is_gpo)
|
|
sx150x_set_oscio(chip, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int sx150x_install_irq_chip(struct sx150x_chip *chip,
|
|
int irq_summary,
|
|
int irq_base)
|
|
{
|
|
int err;
|
|
|
|
chip->irq_summary = irq_summary;
|
|
chip->irq_base = irq_base;
|
|
|
|
/* Add gpio chip to irq subsystem */
|
|
err = gpiochip_irqchip_add(&chip->gpio_chip,
|
|
&chip->irq_chip, chip->irq_base,
|
|
handle_edge_irq, IRQ_TYPE_EDGE_BOTH);
|
|
if (err) {
|
|
dev_err(&chip->client->dev,
|
|
"could not connect irqchip to gpiochip\n");
|
|
return err;
|
|
}
|
|
|
|
err = devm_request_threaded_irq(&chip->client->dev,
|
|
irq_summary, NULL, sx150x_irq_thread_fn,
|
|
IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_FALLING,
|
|
chip->irq_chip.name, chip);
|
|
if (err < 0) {
|
|
chip->irq_summary = -1;
|
|
chip->irq_base = -1;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int sx150x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WRITE_WORD_DATA;
|
|
struct sx150x_platform_data *pdata;
|
|
struct sx150x_chip *chip;
|
|
int rc;
|
|
|
|
pdata = dev_get_platdata(&client->dev);
|
|
if (!pdata)
|
|
return -EINVAL;
|
|
|
|
if (!i2c_check_functionality(client->adapter, i2c_funcs))
|
|
return -ENOSYS;
|
|
|
|
chip = devm_kzalloc(&client->dev,
|
|
sizeof(struct sx150x_chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
sx150x_init_chip(chip, client, id->driver_data, pdata);
|
|
rc = sx150x_init_hw(chip, pdata);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdata->irq_summary >= 0) {
|
|
rc = sx150x_install_irq_chip(chip,
|
|
pdata->irq_summary,
|
|
pdata->irq_base);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
i2c_set_clientdata(client, chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver sx150x_driver = {
|
|
.driver = {
|
|
.name = "sx150x",
|
|
.of_match_table = of_match_ptr(sx150x_of_match),
|
|
},
|
|
.probe = sx150x_probe,
|
|
.id_table = sx150x_id,
|
|
};
|
|
|
|
static int __init sx150x_init(void)
|
|
{
|
|
return i2c_add_driver(&sx150x_driver);
|
|
}
|
|
subsys_initcall(sx150x_init);
|