mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
d9a997bd4d
We need to perform a reset a start up to make sure that the chip is in a
consistent state. This reset also disables all the interrupts which
should only be enabled together with the iio buffer. Not doing this, was
sometimes causing unwanted interrupts to trigger.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Fixes: f4f55ce38e
("iio:adxl372: Add FIFO and interrupts support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
993 lines
25 KiB
C
993 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* ADXL372 3-Axis Digital Accelerometer core driver
|
|
*
|
|
* Copyright 2018 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#include "adxl372.h"
|
|
|
|
/* ADXL372 registers definition */
|
|
#define ADXL372_DEVID 0x00
|
|
#define ADXL372_DEVID_MST 0x01
|
|
#define ADXL372_PARTID 0x02
|
|
#define ADXL372_STATUS_1 0x04
|
|
#define ADXL372_STATUS_2 0x05
|
|
#define ADXL372_FIFO_ENTRIES_2 0x06
|
|
#define ADXL372_FIFO_ENTRIES_1 0x07
|
|
#define ADXL372_X_DATA_H 0x08
|
|
#define ADXL372_X_DATA_L 0x09
|
|
#define ADXL372_Y_DATA_H 0x0A
|
|
#define ADXL372_Y_DATA_L 0x0B
|
|
#define ADXL372_Z_DATA_H 0x0C
|
|
#define ADXL372_Z_DATA_L 0x0D
|
|
#define ADXL372_X_MAXPEAK_H 0x15
|
|
#define ADXL372_X_MAXPEAK_L 0x16
|
|
#define ADXL372_Y_MAXPEAK_H 0x17
|
|
#define ADXL372_Y_MAXPEAK_L 0x18
|
|
#define ADXL372_Z_MAXPEAK_H 0x19
|
|
#define ADXL372_Z_MAXPEAK_L 0x1A
|
|
#define ADXL372_OFFSET_X 0x20
|
|
#define ADXL372_OFFSET_Y 0x21
|
|
#define ADXL372_OFFSET_Z 0x22
|
|
#define ADXL372_X_THRESH_ACT_H 0x23
|
|
#define ADXL372_X_THRESH_ACT_L 0x24
|
|
#define ADXL372_Y_THRESH_ACT_H 0x25
|
|
#define ADXL372_Y_THRESH_ACT_L 0x26
|
|
#define ADXL372_Z_THRESH_ACT_H 0x27
|
|
#define ADXL372_Z_THRESH_ACT_L 0x28
|
|
#define ADXL372_TIME_ACT 0x29
|
|
#define ADXL372_X_THRESH_INACT_H 0x2A
|
|
#define ADXL372_X_THRESH_INACT_L 0x2B
|
|
#define ADXL372_Y_THRESH_INACT_H 0x2C
|
|
#define ADXL372_Y_THRESH_INACT_L 0x2D
|
|
#define ADXL372_Z_THRESH_INACT_H 0x2E
|
|
#define ADXL372_Z_THRESH_INACT_L 0x2F
|
|
#define ADXL372_TIME_INACT_H 0x30
|
|
#define ADXL372_TIME_INACT_L 0x31
|
|
#define ADXL372_X_THRESH_ACT2_H 0x32
|
|
#define ADXL372_X_THRESH_ACT2_L 0x33
|
|
#define ADXL372_Y_THRESH_ACT2_H 0x34
|
|
#define ADXL372_Y_THRESH_ACT2_L 0x35
|
|
#define ADXL372_Z_THRESH_ACT2_H 0x36
|
|
#define ADXL372_Z_THRESH_ACT2_L 0x37
|
|
#define ADXL372_HPF 0x38
|
|
#define ADXL372_FIFO_SAMPLES 0x39
|
|
#define ADXL372_FIFO_CTL 0x3A
|
|
#define ADXL372_INT1_MAP 0x3B
|
|
#define ADXL372_INT2_MAP 0x3C
|
|
#define ADXL372_TIMING 0x3D
|
|
#define ADXL372_MEASURE 0x3E
|
|
#define ADXL372_POWER_CTL 0x3F
|
|
#define ADXL372_SELF_TEST 0x40
|
|
#define ADXL372_RESET 0x41
|
|
#define ADXL372_FIFO_DATA 0x42
|
|
|
|
#define ADXL372_DEVID_VAL 0xAD
|
|
#define ADXL372_PARTID_VAL 0xFA
|
|
#define ADXL372_RESET_CODE 0x52
|
|
|
|
/* ADXL372_POWER_CTL */
|
|
#define ADXL372_POWER_CTL_MODE_MSK GENMASK_ULL(1, 0)
|
|
#define ADXL372_POWER_CTL_MODE(x) (((x) & 0x3) << 0)
|
|
|
|
/* ADXL372_MEASURE */
|
|
#define ADXL372_MEASURE_LINKLOOP_MSK GENMASK_ULL(5, 4)
|
|
#define ADXL372_MEASURE_LINKLOOP_MODE(x) (((x) & 0x3) << 4)
|
|
#define ADXL372_MEASURE_BANDWIDTH_MSK GENMASK_ULL(2, 0)
|
|
#define ADXL372_MEASURE_BANDWIDTH_MODE(x) (((x) & 0x7) << 0)
|
|
|
|
/* ADXL372_TIMING */
|
|
#define ADXL372_TIMING_ODR_MSK GENMASK_ULL(7, 5)
|
|
#define ADXL372_TIMING_ODR_MODE(x) (((x) & 0x7) << 5)
|
|
|
|
/* ADXL372_FIFO_CTL */
|
|
#define ADXL372_FIFO_CTL_FORMAT_MSK GENMASK(5, 3)
|
|
#define ADXL372_FIFO_CTL_FORMAT_MODE(x) (((x) & 0x7) << 3)
|
|
#define ADXL372_FIFO_CTL_MODE_MSK GENMASK(2, 1)
|
|
#define ADXL372_FIFO_CTL_MODE_MODE(x) (((x) & 0x3) << 1)
|
|
#define ADXL372_FIFO_CTL_SAMPLES_MSK BIT(1)
|
|
#define ADXL372_FIFO_CTL_SAMPLES_MODE(x) (((x) > 0xFF) ? 1 : 0)
|
|
|
|
/* ADXL372_STATUS_1 */
|
|
#define ADXL372_STATUS_1_DATA_RDY(x) (((x) >> 0) & 0x1)
|
|
#define ADXL372_STATUS_1_FIFO_RDY(x) (((x) >> 1) & 0x1)
|
|
#define ADXL372_STATUS_1_FIFO_FULL(x) (((x) >> 2) & 0x1)
|
|
#define ADXL372_STATUS_1_FIFO_OVR(x) (((x) >> 3) & 0x1)
|
|
#define ADXL372_STATUS_1_USR_NVM_BUSY(x) (((x) >> 5) & 0x1)
|
|
#define ADXL372_STATUS_1_AWAKE(x) (((x) >> 6) & 0x1)
|
|
#define ADXL372_STATUS_1_ERR_USR_REGS(x) (((x) >> 7) & 0x1)
|
|
|
|
/* ADXL372_INT1_MAP */
|
|
#define ADXL372_INT1_MAP_DATA_RDY_MSK BIT(0)
|
|
#define ADXL372_INT1_MAP_DATA_RDY_MODE(x) (((x) & 0x1) << 0)
|
|
#define ADXL372_INT1_MAP_FIFO_RDY_MSK BIT(1)
|
|
#define ADXL372_INT1_MAP_FIFO_RDY_MODE(x) (((x) & 0x1) << 1)
|
|
#define ADXL372_INT1_MAP_FIFO_FULL_MSK BIT(2)
|
|
#define ADXL372_INT1_MAP_FIFO_FULL_MODE(x) (((x) & 0x1) << 2)
|
|
#define ADXL372_INT1_MAP_FIFO_OVR_MSK BIT(3)
|
|
#define ADXL372_INT1_MAP_FIFO_OVR_MODE(x) (((x) & 0x1) << 3)
|
|
#define ADXL372_INT1_MAP_INACT_MSK BIT(4)
|
|
#define ADXL372_INT1_MAP_INACT_MODE(x) (((x) & 0x1) << 4)
|
|
#define ADXL372_INT1_MAP_ACT_MSK BIT(5)
|
|
#define ADXL372_INT1_MAP_ACT_MODE(x) (((x) & 0x1) << 5)
|
|
#define ADXL372_INT1_MAP_AWAKE_MSK BIT(6)
|
|
#define ADXL372_INT1_MAP_AWAKE_MODE(x) (((x) & 0x1) << 6)
|
|
#define ADXL372_INT1_MAP_LOW_MSK BIT(7)
|
|
#define ADXL372_INT1_MAP_LOW_MODE(x) (((x) & 0x1) << 7)
|
|
|
|
/* The ADXL372 includes a deep, 512 sample FIFO buffer */
|
|
#define ADXL372_FIFO_SIZE 512
|
|
|
|
/*
|
|
* At +/- 200g with 12-bit resolution, scale is computed as:
|
|
* (200 + 200) * 9.81 / (2^12 - 1) = 0.958241
|
|
*/
|
|
#define ADXL372_USCALE 958241
|
|
|
|
enum adxl372_op_mode {
|
|
ADXL372_STANDBY,
|
|
ADXL372_WAKE_UP,
|
|
ADXL372_INSTANT_ON,
|
|
ADXL372_FULL_BW_MEASUREMENT,
|
|
};
|
|
|
|
enum adxl372_act_proc_mode {
|
|
ADXL372_DEFAULT,
|
|
ADXL372_LINKED,
|
|
ADXL372_LOOPED,
|
|
};
|
|
|
|
enum adxl372_th_activity {
|
|
ADXL372_ACTIVITY,
|
|
ADXL372_ACTIVITY2,
|
|
ADXL372_INACTIVITY,
|
|
};
|
|
|
|
enum adxl372_odr {
|
|
ADXL372_ODR_400HZ,
|
|
ADXL372_ODR_800HZ,
|
|
ADXL372_ODR_1600HZ,
|
|
ADXL372_ODR_3200HZ,
|
|
ADXL372_ODR_6400HZ,
|
|
};
|
|
|
|
enum adxl372_bandwidth {
|
|
ADXL372_BW_200HZ,
|
|
ADXL372_BW_400HZ,
|
|
ADXL372_BW_800HZ,
|
|
ADXL372_BW_1600HZ,
|
|
ADXL372_BW_3200HZ,
|
|
};
|
|
|
|
static const unsigned int adxl372_th_reg_high_addr[3] = {
|
|
[ADXL372_ACTIVITY] = ADXL372_X_THRESH_ACT_H,
|
|
[ADXL372_ACTIVITY2] = ADXL372_X_THRESH_ACT2_H,
|
|
[ADXL372_INACTIVITY] = ADXL372_X_THRESH_INACT_H,
|
|
};
|
|
|
|
enum adxl372_fifo_format {
|
|
ADXL372_XYZ_FIFO,
|
|
ADXL372_X_FIFO,
|
|
ADXL372_Y_FIFO,
|
|
ADXL372_XY_FIFO,
|
|
ADXL372_Z_FIFO,
|
|
ADXL372_XZ_FIFO,
|
|
ADXL372_YZ_FIFO,
|
|
ADXL372_XYZ_PEAK_FIFO,
|
|
};
|
|
|
|
enum adxl372_fifo_mode {
|
|
ADXL372_FIFO_BYPASSED,
|
|
ADXL372_FIFO_STREAMED,
|
|
ADXL372_FIFO_TRIGGERED,
|
|
ADXL372_FIFO_OLD_SAVED
|
|
};
|
|
|
|
static const int adxl372_samp_freq_tbl[5] = {
|
|
400, 800, 1600, 3200, 6400,
|
|
};
|
|
|
|
static const int adxl372_bw_freq_tbl[5] = {
|
|
200, 400, 800, 1600, 3200,
|
|
};
|
|
|
|
struct adxl372_axis_lookup {
|
|
unsigned int bits;
|
|
enum adxl372_fifo_format fifo_format;
|
|
};
|
|
|
|
static const struct adxl372_axis_lookup adxl372_axis_lookup_table[] = {
|
|
{ BIT(0), ADXL372_X_FIFO },
|
|
{ BIT(1), ADXL372_Y_FIFO },
|
|
{ BIT(2), ADXL372_Z_FIFO },
|
|
{ BIT(0) | BIT(1), ADXL372_XY_FIFO },
|
|
{ BIT(0) | BIT(2), ADXL372_XZ_FIFO },
|
|
{ BIT(1) | BIT(2), ADXL372_YZ_FIFO },
|
|
{ BIT(0) | BIT(1) | BIT(2), ADXL372_XYZ_FIFO },
|
|
};
|
|
|
|
#define ADXL372_ACCEL_CHANNEL(index, reg, axis) { \
|
|
.type = IIO_ACCEL, \
|
|
.address = reg, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
|
|
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
|
|
.scan_index = index, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
.shift = 4, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec adxl372_channels[] = {
|
|
ADXL372_ACCEL_CHANNEL(0, ADXL372_X_DATA_H, X),
|
|
ADXL372_ACCEL_CHANNEL(1, ADXL372_Y_DATA_H, Y),
|
|
ADXL372_ACCEL_CHANNEL(2, ADXL372_Z_DATA_H, Z),
|
|
};
|
|
|
|
struct adxl372_state {
|
|
int irq;
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct iio_trigger *dready_trig;
|
|
enum adxl372_fifo_mode fifo_mode;
|
|
enum adxl372_fifo_format fifo_format;
|
|
enum adxl372_op_mode op_mode;
|
|
enum adxl372_act_proc_mode act_proc_mode;
|
|
enum adxl372_odr odr;
|
|
enum adxl372_bandwidth bw;
|
|
u32 act_time_ms;
|
|
u32 inact_time_ms;
|
|
u8 fifo_set_size;
|
|
u8 int1_bitmask;
|
|
u8 int2_bitmask;
|
|
u16 watermark;
|
|
__be16 fifo_buf[ADXL372_FIFO_SIZE];
|
|
};
|
|
|
|
static const unsigned long adxl372_channel_masks[] = {
|
|
BIT(0), BIT(1), BIT(2),
|
|
BIT(0) | BIT(1),
|
|
BIT(0) | BIT(2),
|
|
BIT(1) | BIT(2),
|
|
BIT(0) | BIT(1) | BIT(2),
|
|
0
|
|
};
|
|
|
|
static int adxl372_read_axis(struct adxl372_state *st, u8 addr)
|
|
{
|
|
__be16 regval;
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(st->regmap, addr, ®val, sizeof(regval));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return be16_to_cpu(regval);
|
|
}
|
|
|
|
static int adxl372_set_op_mode(struct adxl372_state *st,
|
|
enum adxl372_op_mode op_mode)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(st->regmap, ADXL372_POWER_CTL,
|
|
ADXL372_POWER_CTL_MODE_MSK,
|
|
ADXL372_POWER_CTL_MODE(op_mode));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
st->op_mode = op_mode;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adxl372_set_odr(struct adxl372_state *st,
|
|
enum adxl372_odr odr)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(st->regmap, ADXL372_TIMING,
|
|
ADXL372_TIMING_ODR_MSK,
|
|
ADXL372_TIMING_ODR_MODE(odr));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
st->odr = odr;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adxl372_find_closest_match(const int *array,
|
|
unsigned int size, int val)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
if (val <= array[i])
|
|
return i;
|
|
}
|
|
|
|
return size - 1;
|
|
}
|
|
|
|
static int adxl372_set_bandwidth(struct adxl372_state *st,
|
|
enum adxl372_bandwidth bw)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(st->regmap, ADXL372_MEASURE,
|
|
ADXL372_MEASURE_BANDWIDTH_MSK,
|
|
ADXL372_MEASURE_BANDWIDTH_MODE(bw));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
st->bw = bw;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adxl372_set_act_proc_mode(struct adxl372_state *st,
|
|
enum adxl372_act_proc_mode mode)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(st->regmap,
|
|
ADXL372_MEASURE,
|
|
ADXL372_MEASURE_LINKLOOP_MSK,
|
|
ADXL372_MEASURE_LINKLOOP_MODE(mode));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
st->act_proc_mode = mode;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adxl372_set_activity_threshold(struct adxl372_state *st,
|
|
enum adxl372_th_activity act,
|
|
bool ref_en, bool enable,
|
|
unsigned int threshold)
|
|
{
|
|
unsigned char buf[6];
|
|
unsigned char th_reg_high_val, th_reg_low_val, th_reg_high_addr;
|
|
|
|
/* scale factor is 100 mg/code */
|
|
th_reg_high_val = (threshold / 100) >> 3;
|
|
th_reg_low_val = ((threshold / 100) << 5) | (ref_en << 1) | enable;
|
|
th_reg_high_addr = adxl372_th_reg_high_addr[act];
|
|
|
|
buf[0] = th_reg_high_val;
|
|
buf[1] = th_reg_low_val;
|
|
buf[2] = th_reg_high_val;
|
|
buf[3] = th_reg_low_val;
|
|
buf[4] = th_reg_high_val;
|
|
buf[5] = th_reg_low_val;
|
|
|
|
return regmap_bulk_write(st->regmap, th_reg_high_addr,
|
|
buf, ARRAY_SIZE(buf));
|
|
}
|
|
|
|
static int adxl372_set_activity_time_ms(struct adxl372_state *st,
|
|
unsigned int act_time_ms)
|
|
{
|
|
unsigned int reg_val, scale_factor;
|
|
int ret;
|
|
|
|
/*
|
|
* 3.3 ms per code is the scale factor of the TIME_ACT register for
|
|
* ODR = 6400 Hz. It is 6.6 ms per code for ODR = 3200 Hz and below.
|
|
*/
|
|
if (st->odr == ADXL372_ODR_6400HZ)
|
|
scale_factor = 3300;
|
|
else
|
|
scale_factor = 6600;
|
|
|
|
reg_val = DIV_ROUND_CLOSEST(act_time_ms * 1000, scale_factor);
|
|
|
|
/* TIME_ACT register is 8 bits wide */
|
|
if (reg_val > 0xFF)
|
|
reg_val = 0xFF;
|
|
|
|
ret = regmap_write(st->regmap, ADXL372_TIME_ACT, reg_val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
st->act_time_ms = act_time_ms;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adxl372_set_inactivity_time_ms(struct adxl372_state *st,
|
|
unsigned int inact_time_ms)
|
|
{
|
|
unsigned int reg_val_h, reg_val_l, res, scale_factor;
|
|
int ret;
|
|
|
|
/*
|
|
* 13 ms per code is the scale factor of the TIME_INACT register for
|
|
* ODR = 6400 Hz. It is 26 ms per code for ODR = 3200 Hz and below.
|
|
*/
|
|
if (st->odr == ADXL372_ODR_6400HZ)
|
|
scale_factor = 13;
|
|
else
|
|
scale_factor = 26;
|
|
|
|
res = DIV_ROUND_CLOSEST(inact_time_ms, scale_factor);
|
|
reg_val_h = (res >> 8) & 0xFF;
|
|
reg_val_l = res & 0xFF;
|
|
|
|
ret = regmap_write(st->regmap, ADXL372_TIME_INACT_H, reg_val_h);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_write(st->regmap, ADXL372_TIME_INACT_L, reg_val_l);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
st->inact_time_ms = inact_time_ms;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adxl372_set_interrupts(struct adxl372_state *st,
|
|
unsigned char int1_bitmask,
|
|
unsigned char int2_bitmask)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(st->regmap, ADXL372_INT1_MAP, int1_bitmask);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return regmap_write(st->regmap, ADXL372_INT2_MAP, int2_bitmask);
|
|
}
|
|
|
|
static int adxl372_configure_fifo(struct adxl372_state *st)
|
|
{
|
|
unsigned int fifo_samples, fifo_ctl;
|
|
int ret;
|
|
|
|
/* FIFO must be configured while in standby mode */
|
|
ret = adxl372_set_op_mode(st, ADXL372_STANDBY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* watermark stores the number of sets; we need to write the FIFO
|
|
* registers with the number of samples
|
|
*/
|
|
fifo_samples = (st->watermark * st->fifo_set_size);
|
|
fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) |
|
|
ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) |
|
|
ADXL372_FIFO_CTL_SAMPLES_MODE(fifo_samples);
|
|
|
|
ret = regmap_write(st->regmap,
|
|
ADXL372_FIFO_SAMPLES, fifo_samples & 0xFF);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_write(st->regmap, ADXL372_FIFO_CTL, fifo_ctl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return adxl372_set_op_mode(st, ADXL372_FULL_BW_MEASUREMENT);
|
|
}
|
|
|
|
static int adxl372_get_status(struct adxl372_state *st,
|
|
u8 *status1, u8 *status2,
|
|
u16 *fifo_entries)
|
|
{
|
|
__be32 buf;
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* STATUS1, STATUS2, FIFO_ENTRIES2 and FIFO_ENTRIES are adjacent regs */
|
|
ret = regmap_bulk_read(st->regmap, ADXL372_STATUS_1,
|
|
&buf, sizeof(buf));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = be32_to_cpu(buf);
|
|
|
|
*status1 = (val >> 24) & 0x0F;
|
|
*status2 = (val >> 16) & 0x0F;
|
|
/*
|
|
* FIFO_ENTRIES contains the least significant byte, and FIFO_ENTRIES2
|
|
* contains the two most significant bits
|
|
*/
|
|
*fifo_entries = val & 0x3FF;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t adxl372_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
u8 status1, status2;
|
|
u16 fifo_entries;
|
|
int i, ret;
|
|
|
|
ret = adxl372_get_status(st, &status1, &status2, &fifo_entries);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
if (st->fifo_mode != ADXL372_FIFO_BYPASSED &&
|
|
ADXL372_STATUS_1_FIFO_FULL(status1)) {
|
|
/*
|
|
* When reading data from multiple axes from the FIFO,
|
|
* to ensure that data is not overwritten and stored out
|
|
* of order at least one sample set must be left in the
|
|
* FIFO after every read.
|
|
*/
|
|
fifo_entries -= st->fifo_set_size;
|
|
|
|
/* Read data from the FIFO */
|
|
ret = regmap_noinc_read(st->regmap, ADXL372_FIFO_DATA,
|
|
st->fifo_buf,
|
|
fifo_entries * sizeof(u16));
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Each sample is 2 bytes */
|
|
for (i = 0; i < fifo_entries; i += st->fifo_set_size)
|
|
iio_push_to_buffers(indio_dev, &st->fifo_buf[i]);
|
|
}
|
|
err:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int adxl372_setup(struct adxl372_state *st)
|
|
{
|
|
unsigned int regval;
|
|
int ret;
|
|
|
|
ret = regmap_read(st->regmap, ADXL372_DEVID, ®val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (regval != ADXL372_DEVID_VAL) {
|
|
dev_err(st->dev, "Invalid chip id %x\n", regval);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Perform a software reset to make sure the device is in a consistent
|
|
* state after start up.
|
|
*/
|
|
ret = regmap_write(st->regmap, ADXL372_RESET, ADXL372_RESET_CODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = adxl372_set_op_mode(st, ADXL372_STANDBY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set threshold for activity detection to 1g */
|
|
ret = adxl372_set_activity_threshold(st, ADXL372_ACTIVITY,
|
|
true, true, 1000);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set threshold for inactivity detection to 100mg */
|
|
ret = adxl372_set_activity_threshold(st, ADXL372_INACTIVITY,
|
|
true, true, 100);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set activity processing in Looped mode */
|
|
ret = adxl372_set_act_proc_mode(st, ADXL372_LOOPED);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = adxl372_set_odr(st, ADXL372_ODR_6400HZ);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = adxl372_set_bandwidth(st, ADXL372_BW_3200HZ);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set activity timer to 1ms */
|
|
ret = adxl372_set_activity_time_ms(st, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set inactivity timer to 10s */
|
|
ret = adxl372_set_inactivity_time_ms(st, 10000);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set the mode of operation to full bandwidth measurement mode */
|
|
return adxl372_set_op_mode(st, ADXL372_FULL_BW_MEASUREMENT);
|
|
}
|
|
|
|
static int adxl372_reg_access(struct iio_dev *indio_dev,
|
|
unsigned int reg,
|
|
unsigned int writeval,
|
|
unsigned int *readval)
|
|
{
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
|
|
if (readval)
|
|
return regmap_read(st->regmap, reg, readval);
|
|
else
|
|
return regmap_write(st->regmap, reg, writeval);
|
|
}
|
|
|
|
static int adxl372_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long info)
|
|
{
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adxl372_read_axis(st, chan->address);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = sign_extend32(ret >> chan->scan_type.shift,
|
|
chan->scan_type.realbits - 1);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
*val2 = ADXL372_USCALE;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = adxl372_samp_freq_tbl[st->odr];
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
|
|
*val = adxl372_bw_freq_tbl[st->bw];
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int adxl372_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long info)
|
|
{
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
int odr_index, bw_index, ret;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
odr_index = adxl372_find_closest_match(adxl372_samp_freq_tbl,
|
|
ARRAY_SIZE(adxl372_samp_freq_tbl),
|
|
val);
|
|
ret = adxl372_set_odr(st, odr_index);
|
|
if (ret < 0)
|
|
return ret;
|
|
/*
|
|
* The timer period depends on the ODR selected.
|
|
* At 3200 Hz and below, it is 6.6 ms; at 6400 Hz, it is 3.3 ms
|
|
*/
|
|
ret = adxl372_set_activity_time_ms(st, st->act_time_ms);
|
|
if (ret < 0)
|
|
return ret;
|
|
/*
|
|
* The timer period depends on the ODR selected.
|
|
* At 3200 Hz and below, it is 26 ms; at 6400 Hz, it is 13 ms
|
|
*/
|
|
ret = adxl372_set_inactivity_time_ms(st, st->inact_time_ms);
|
|
if (ret < 0)
|
|
return ret;
|
|
/*
|
|
* The maximum bandwidth is constrained to at most half of
|
|
* the ODR to ensure that the Nyquist criteria is not violated
|
|
*/
|
|
if (st->bw > odr_index)
|
|
ret = adxl372_set_bandwidth(st, odr_index);
|
|
|
|
return ret;
|
|
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
|
|
bw_index = adxl372_find_closest_match(adxl372_bw_freq_tbl,
|
|
ARRAY_SIZE(adxl372_bw_freq_tbl),
|
|
val);
|
|
return adxl372_set_bandwidth(st, bw_index);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static ssize_t adxl372_show_filter_freq_avail(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
int i;
|
|
size_t len = 0;
|
|
|
|
for (i = 0; i <= st->odr; i++)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len,
|
|
"%d ", adxl372_bw_freq_tbl[i]);
|
|
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t adxl372_get_fifo_enabled(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d\n", st->fifo_mode);
|
|
}
|
|
|
|
static ssize_t adxl372_get_fifo_watermark(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d\n", st->watermark);
|
|
}
|
|
|
|
static IIO_CONST_ATTR(hwfifo_watermark_min, "1");
|
|
static IIO_CONST_ATTR(hwfifo_watermark_max,
|
|
__stringify(ADXL372_FIFO_SIZE));
|
|
static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
|
|
adxl372_get_fifo_watermark, NULL, 0);
|
|
static IIO_DEVICE_ATTR(hwfifo_enabled, 0444,
|
|
adxl372_get_fifo_enabled, NULL, 0);
|
|
|
|
static const struct attribute *adxl372_fifo_attributes[] = {
|
|
&iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
|
|
&iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
|
|
&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
|
|
&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static int adxl372_set_watermark(struct iio_dev *indio_dev, unsigned int val)
|
|
{
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
|
|
if (val > ADXL372_FIFO_SIZE)
|
|
val = ADXL372_FIFO_SIZE;
|
|
|
|
st->watermark = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
unsigned int mask;
|
|
int i, ret;
|
|
|
|
ret = iio_triggered_buffer_postenable(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = adxl372_set_interrupts(st, ADXL372_INT1_MAP_FIFO_FULL_MSK, 0);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
mask = *indio_dev->active_scan_mask;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adxl372_axis_lookup_table); i++) {
|
|
if (mask == adxl372_axis_lookup_table[i].bits)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(adxl372_axis_lookup_table)) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
st->fifo_format = adxl372_axis_lookup_table[i].fifo_format;
|
|
st->fifo_set_size = bitmap_weight(indio_dev->active_scan_mask,
|
|
indio_dev->masklength);
|
|
/*
|
|
* The 512 FIFO samples can be allotted in several ways, such as:
|
|
* 170 sample sets of concurrent 3-axis data
|
|
* 256 sample sets of concurrent 2-axis data (user selectable)
|
|
* 512 sample sets of single-axis data
|
|
*/
|
|
if ((st->watermark * st->fifo_set_size) > ADXL372_FIFO_SIZE)
|
|
st->watermark = (ADXL372_FIFO_SIZE / st->fifo_set_size);
|
|
|
|
st->fifo_mode = ADXL372_FIFO_STREAMED;
|
|
|
|
ret = adxl372_configure_fifo(st);
|
|
if (ret < 0) {
|
|
st->fifo_mode = ADXL372_FIFO_BYPASSED;
|
|
adxl372_set_interrupts(st, 0, 0);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
iio_triggered_buffer_predisable(indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static int adxl372_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
|
|
adxl372_set_interrupts(st, 0, 0);
|
|
st->fifo_mode = ADXL372_FIFO_BYPASSED;
|
|
adxl372_configure_fifo(st);
|
|
|
|
return iio_triggered_buffer_predisable(indio_dev);
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops adxl372_buffer_ops = {
|
|
.postenable = adxl372_buffer_postenable,
|
|
.predisable = adxl372_buffer_predisable,
|
|
};
|
|
|
|
static int adxl372_dready_trig_set_state(struct iio_trigger *trig,
|
|
bool state)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
unsigned long int mask = 0;
|
|
|
|
if (state)
|
|
mask = ADXL372_INT1_MAP_FIFO_FULL_MSK;
|
|
|
|
return adxl372_set_interrupts(st, mask, 0);
|
|
}
|
|
|
|
static int adxl372_validate_trigger(struct iio_dev *indio_dev,
|
|
struct iio_trigger *trig)
|
|
{
|
|
struct adxl372_state *st = iio_priv(indio_dev);
|
|
|
|
if (st->dready_trig != trig)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_trigger_ops adxl372_trigger_ops = {
|
|
.validate_device = &iio_trigger_validate_own_device,
|
|
.set_trigger_state = adxl372_dready_trig_set_state,
|
|
};
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("400 800 1600 3200 6400");
|
|
static IIO_DEVICE_ATTR(in_accel_filter_low_pass_3db_frequency_available,
|
|
0444, adxl372_show_filter_freq_avail, NULL, 0);
|
|
|
|
static struct attribute *adxl372_attributes[] = {
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_dev_attr_in_accel_filter_low_pass_3db_frequency_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group adxl372_attrs_group = {
|
|
.attrs = adxl372_attributes,
|
|
};
|
|
|
|
static const struct iio_info adxl372_info = {
|
|
.validate_trigger = &adxl372_validate_trigger,
|
|
.attrs = &adxl372_attrs_group,
|
|
.read_raw = adxl372_read_raw,
|
|
.write_raw = adxl372_write_raw,
|
|
.debugfs_reg_access = &adxl372_reg_access,
|
|
.hwfifo_set_watermark = adxl372_set_watermark,
|
|
};
|
|
|
|
bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (reg == ADXL372_FIFO_DATA);
|
|
}
|
|
EXPORT_SYMBOL_GPL(adxl372_readable_noinc_reg);
|
|
|
|
int adxl372_probe(struct device *dev, struct regmap *regmap,
|
|
int irq, const char *name)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct adxl372_state *st;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
dev_set_drvdata(dev, indio_dev);
|
|
|
|
st->dev = dev;
|
|
st->regmap = regmap;
|
|
st->irq = irq;
|
|
|
|
indio_dev->channels = adxl372_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(adxl372_channels);
|
|
indio_dev->available_scan_masks = adxl372_channel_masks;
|
|
indio_dev->dev.parent = dev;
|
|
indio_dev->name = name;
|
|
indio_dev->info = &adxl372_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
|
|
|
|
ret = adxl372_setup(st);
|
|
if (ret < 0) {
|
|
dev_err(dev, "ADXL372 setup failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_iio_triggered_buffer_setup(dev,
|
|
indio_dev, NULL,
|
|
adxl372_trigger_handler,
|
|
&adxl372_buffer_ops);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
iio_buffer_set_attrs(indio_dev->buffer, adxl372_fifo_attributes);
|
|
|
|
if (st->irq) {
|
|
st->dready_trig = devm_iio_trigger_alloc(dev,
|
|
"%s-dev%d",
|
|
indio_dev->name,
|
|
indio_dev->id);
|
|
if (st->dready_trig == NULL)
|
|
return -ENOMEM;
|
|
|
|
st->dready_trig->ops = &adxl372_trigger_ops;
|
|
st->dready_trig->dev.parent = dev;
|
|
iio_trigger_set_drvdata(st->dready_trig, indio_dev);
|
|
ret = devm_iio_trigger_register(dev, st->dready_trig);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
indio_dev->trig = iio_trigger_get(st->dready_trig);
|
|
|
|
ret = devm_request_threaded_irq(dev, st->irq,
|
|
iio_trigger_generic_data_rdy_poll,
|
|
NULL,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
indio_dev->name, st->dready_trig);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return devm_iio_device_register(dev, indio_dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(adxl372_probe);
|
|
|
|
MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer driver");
|
|
MODULE_LICENSE("GPL");
|