mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 05:02:12 +00:00
0d346d2a6f
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
1507 lines
35 KiB
C
1507 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for the OV7251 camera sensor.
|
|
*
|
|
* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2017-2018, Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
#define OV7251_SC_MODE_SELECT 0x0100
|
|
#define OV7251_SC_MODE_SELECT_SW_STANDBY 0x0
|
|
#define OV7251_SC_MODE_SELECT_STREAMING 0x1
|
|
|
|
#define OV7251_CHIP_ID_HIGH 0x300a
|
|
#define OV7251_CHIP_ID_HIGH_BYTE 0x77
|
|
#define OV7251_CHIP_ID_LOW 0x300b
|
|
#define OV7251_CHIP_ID_LOW_BYTE 0x50
|
|
#define OV7251_SC_GP_IO_IN1 0x3029
|
|
#define OV7251_AEC_EXPO_0 0x3500
|
|
#define OV7251_AEC_EXPO_1 0x3501
|
|
#define OV7251_AEC_EXPO_2 0x3502
|
|
#define OV7251_AEC_AGC_ADJ_0 0x350a
|
|
#define OV7251_AEC_AGC_ADJ_1 0x350b
|
|
#define OV7251_TIMING_FORMAT1 0x3820
|
|
#define OV7251_TIMING_FORMAT1_VFLIP BIT(2)
|
|
#define OV7251_TIMING_FORMAT2 0x3821
|
|
#define OV7251_TIMING_FORMAT2_MIRROR BIT(2)
|
|
#define OV7251_PRE_ISP_00 0x5e00
|
|
#define OV7251_PRE_ISP_00_TEST_PATTERN BIT(7)
|
|
|
|
struct reg_value {
|
|
u16 reg;
|
|
u8 val;
|
|
};
|
|
|
|
struct ov7251_mode_info {
|
|
u32 width;
|
|
u32 height;
|
|
const struct reg_value *data;
|
|
u32 data_size;
|
|
u32 pixel_clock;
|
|
u32 link_freq;
|
|
u16 exposure_max;
|
|
u16 exposure_def;
|
|
struct v4l2_fract timeperframe;
|
|
};
|
|
|
|
struct ov7251 {
|
|
struct i2c_client *i2c_client;
|
|
struct device *dev;
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_fwnode_endpoint ep;
|
|
struct v4l2_mbus_framefmt fmt;
|
|
struct v4l2_rect crop;
|
|
struct clk *xclk;
|
|
u32 xclk_freq;
|
|
|
|
struct regulator *io_regulator;
|
|
struct regulator *core_regulator;
|
|
struct regulator *analog_regulator;
|
|
|
|
const struct ov7251_mode_info *current_mode;
|
|
|
|
struct v4l2_ctrl_handler ctrls;
|
|
struct v4l2_ctrl *pixel_clock;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *gain;
|
|
|
|
/* Cached register values */
|
|
u8 aec_pk_manual;
|
|
u8 pre_isp_00;
|
|
u8 timing_format1;
|
|
u8 timing_format2;
|
|
|
|
struct mutex lock; /* lock to protect power state, ctrls and mode */
|
|
bool power_on;
|
|
|
|
struct gpio_desc *enable_gpio;
|
|
};
|
|
|
|
static inline struct ov7251 *to_ov7251(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct ov7251, sd);
|
|
}
|
|
|
|
static const struct reg_value ov7251_global_init_setting[] = {
|
|
{ 0x0103, 0x01 },
|
|
{ 0x303b, 0x02 },
|
|
};
|
|
|
|
static const struct reg_value ov7251_setting_vga_30fps[] = {
|
|
{ 0x3005, 0x00 },
|
|
{ 0x3012, 0xc0 },
|
|
{ 0x3013, 0xd2 },
|
|
{ 0x3014, 0x04 },
|
|
{ 0x3016, 0xf0 },
|
|
{ 0x3017, 0xf0 },
|
|
{ 0x3018, 0xf0 },
|
|
{ 0x301a, 0xf0 },
|
|
{ 0x301b, 0xf0 },
|
|
{ 0x301c, 0xf0 },
|
|
{ 0x3023, 0x05 },
|
|
{ 0x3037, 0xf0 },
|
|
{ 0x3098, 0x04 }, /* pll2 pre divider */
|
|
{ 0x3099, 0x28 }, /* pll2 multiplier */
|
|
{ 0x309a, 0x05 }, /* pll2 sys divider */
|
|
{ 0x309b, 0x04 }, /* pll2 adc divider */
|
|
{ 0x309d, 0x00 }, /* pll2 divider */
|
|
{ 0x30b0, 0x0a }, /* pll1 pix divider */
|
|
{ 0x30b1, 0x01 }, /* pll1 divider */
|
|
{ 0x30b3, 0x64 }, /* pll1 multiplier */
|
|
{ 0x30b4, 0x03 }, /* pll1 pre divider */
|
|
{ 0x30b5, 0x05 }, /* pll1 mipi divider */
|
|
{ 0x3106, 0xda },
|
|
{ 0x3503, 0x07 },
|
|
{ 0x3509, 0x10 },
|
|
{ 0x3600, 0x1c },
|
|
{ 0x3602, 0x62 },
|
|
{ 0x3620, 0xb7 },
|
|
{ 0x3622, 0x04 },
|
|
{ 0x3626, 0x21 },
|
|
{ 0x3627, 0x30 },
|
|
{ 0x3630, 0x44 },
|
|
{ 0x3631, 0x35 },
|
|
{ 0x3634, 0x60 },
|
|
{ 0x3636, 0x00 },
|
|
{ 0x3662, 0x01 },
|
|
{ 0x3663, 0x70 },
|
|
{ 0x3664, 0x50 },
|
|
{ 0x3666, 0x0a },
|
|
{ 0x3669, 0x1a },
|
|
{ 0x366a, 0x00 },
|
|
{ 0x366b, 0x50 },
|
|
{ 0x3673, 0x01 },
|
|
{ 0x3674, 0xff },
|
|
{ 0x3675, 0x03 },
|
|
{ 0x3705, 0xc1 },
|
|
{ 0x3709, 0x40 },
|
|
{ 0x373c, 0x08 },
|
|
{ 0x3742, 0x00 },
|
|
{ 0x3757, 0xb3 },
|
|
{ 0x3788, 0x00 },
|
|
{ 0x37a8, 0x01 },
|
|
{ 0x37a9, 0xc0 },
|
|
{ 0x3800, 0x00 },
|
|
{ 0x3801, 0x04 },
|
|
{ 0x3802, 0x00 },
|
|
{ 0x3803, 0x04 },
|
|
{ 0x3804, 0x02 },
|
|
{ 0x3805, 0x8b },
|
|
{ 0x3806, 0x01 },
|
|
{ 0x3807, 0xeb },
|
|
{ 0x3808, 0x02 }, /* width high */
|
|
{ 0x3809, 0x80 }, /* width low */
|
|
{ 0x380a, 0x01 }, /* height high */
|
|
{ 0x380b, 0xe0 }, /* height low */
|
|
{ 0x380c, 0x03 }, /* total horiz timing high */
|
|
{ 0x380d, 0xa0 }, /* total horiz timing low */
|
|
{ 0x380e, 0x06 }, /* total vertical timing high */
|
|
{ 0x380f, 0xbc }, /* total vertical timing low */
|
|
{ 0x3810, 0x00 },
|
|
{ 0x3811, 0x04 },
|
|
{ 0x3812, 0x00 },
|
|
{ 0x3813, 0x05 },
|
|
{ 0x3814, 0x11 },
|
|
{ 0x3815, 0x11 },
|
|
{ 0x3820, 0x40 },
|
|
{ 0x3821, 0x00 },
|
|
{ 0x382f, 0x0e },
|
|
{ 0x3832, 0x00 },
|
|
{ 0x3833, 0x05 },
|
|
{ 0x3834, 0x00 },
|
|
{ 0x3835, 0x0c },
|
|
{ 0x3837, 0x00 },
|
|
{ 0x3b80, 0x00 },
|
|
{ 0x3b81, 0xa5 },
|
|
{ 0x3b82, 0x10 },
|
|
{ 0x3b83, 0x00 },
|
|
{ 0x3b84, 0x08 },
|
|
{ 0x3b85, 0x00 },
|
|
{ 0x3b86, 0x01 },
|
|
{ 0x3b87, 0x00 },
|
|
{ 0x3b88, 0x00 },
|
|
{ 0x3b89, 0x00 },
|
|
{ 0x3b8a, 0x00 },
|
|
{ 0x3b8b, 0x05 },
|
|
{ 0x3b8c, 0x00 },
|
|
{ 0x3b8d, 0x00 },
|
|
{ 0x3b8e, 0x00 },
|
|
{ 0x3b8f, 0x1a },
|
|
{ 0x3b94, 0x05 },
|
|
{ 0x3b95, 0xf2 },
|
|
{ 0x3b96, 0x40 },
|
|
{ 0x3c00, 0x89 },
|
|
{ 0x3c01, 0x63 },
|
|
{ 0x3c02, 0x01 },
|
|
{ 0x3c03, 0x00 },
|
|
{ 0x3c04, 0x00 },
|
|
{ 0x3c05, 0x03 },
|
|
{ 0x3c06, 0x00 },
|
|
{ 0x3c07, 0x06 },
|
|
{ 0x3c0c, 0x01 },
|
|
{ 0x3c0d, 0xd0 },
|
|
{ 0x3c0e, 0x02 },
|
|
{ 0x3c0f, 0x0a },
|
|
{ 0x4001, 0x42 },
|
|
{ 0x4004, 0x04 },
|
|
{ 0x4005, 0x00 },
|
|
{ 0x404e, 0x01 },
|
|
{ 0x4300, 0xff },
|
|
{ 0x4301, 0x00 },
|
|
{ 0x4315, 0x00 },
|
|
{ 0x4501, 0x48 },
|
|
{ 0x4600, 0x00 },
|
|
{ 0x4601, 0x4e },
|
|
{ 0x4801, 0x0f },
|
|
{ 0x4806, 0x0f },
|
|
{ 0x4819, 0xaa },
|
|
{ 0x4823, 0x3e },
|
|
{ 0x4837, 0x19 },
|
|
{ 0x4a0d, 0x00 },
|
|
{ 0x4a47, 0x7f },
|
|
{ 0x4a49, 0xf0 },
|
|
{ 0x4a4b, 0x30 },
|
|
{ 0x5000, 0x85 },
|
|
{ 0x5001, 0x80 },
|
|
};
|
|
|
|
static const struct reg_value ov7251_setting_vga_60fps[] = {
|
|
{ 0x3005, 0x00 },
|
|
{ 0x3012, 0xc0 },
|
|
{ 0x3013, 0xd2 },
|
|
{ 0x3014, 0x04 },
|
|
{ 0x3016, 0x10 },
|
|
{ 0x3017, 0x00 },
|
|
{ 0x3018, 0x00 },
|
|
{ 0x301a, 0x00 },
|
|
{ 0x301b, 0x00 },
|
|
{ 0x301c, 0x00 },
|
|
{ 0x3023, 0x05 },
|
|
{ 0x3037, 0xf0 },
|
|
{ 0x3098, 0x04 }, /* pll2 pre divider */
|
|
{ 0x3099, 0x28 }, /* pll2 multiplier */
|
|
{ 0x309a, 0x05 }, /* pll2 sys divider */
|
|
{ 0x309b, 0x04 }, /* pll2 adc divider */
|
|
{ 0x309d, 0x00 }, /* pll2 divider */
|
|
{ 0x30b0, 0x0a }, /* pll1 pix divider */
|
|
{ 0x30b1, 0x01 }, /* pll1 divider */
|
|
{ 0x30b3, 0x64 }, /* pll1 multiplier */
|
|
{ 0x30b4, 0x03 }, /* pll1 pre divider */
|
|
{ 0x30b5, 0x05 }, /* pll1 mipi divider */
|
|
{ 0x3106, 0xda },
|
|
{ 0x3503, 0x07 },
|
|
{ 0x3509, 0x10 },
|
|
{ 0x3600, 0x1c },
|
|
{ 0x3602, 0x62 },
|
|
{ 0x3620, 0xb7 },
|
|
{ 0x3622, 0x04 },
|
|
{ 0x3626, 0x21 },
|
|
{ 0x3627, 0x30 },
|
|
{ 0x3630, 0x44 },
|
|
{ 0x3631, 0x35 },
|
|
{ 0x3634, 0x60 },
|
|
{ 0x3636, 0x00 },
|
|
{ 0x3662, 0x01 },
|
|
{ 0x3663, 0x70 },
|
|
{ 0x3664, 0x50 },
|
|
{ 0x3666, 0x0a },
|
|
{ 0x3669, 0x1a },
|
|
{ 0x366a, 0x00 },
|
|
{ 0x366b, 0x50 },
|
|
{ 0x3673, 0x01 },
|
|
{ 0x3674, 0xff },
|
|
{ 0x3675, 0x03 },
|
|
{ 0x3705, 0xc1 },
|
|
{ 0x3709, 0x40 },
|
|
{ 0x373c, 0x08 },
|
|
{ 0x3742, 0x00 },
|
|
{ 0x3757, 0xb3 },
|
|
{ 0x3788, 0x00 },
|
|
{ 0x37a8, 0x01 },
|
|
{ 0x37a9, 0xc0 },
|
|
{ 0x3800, 0x00 },
|
|
{ 0x3801, 0x04 },
|
|
{ 0x3802, 0x00 },
|
|
{ 0x3803, 0x04 },
|
|
{ 0x3804, 0x02 },
|
|
{ 0x3805, 0x8b },
|
|
{ 0x3806, 0x01 },
|
|
{ 0x3807, 0xeb },
|
|
{ 0x3808, 0x02 }, /* width high */
|
|
{ 0x3809, 0x80 }, /* width low */
|
|
{ 0x380a, 0x01 }, /* height high */
|
|
{ 0x380b, 0xe0 }, /* height low */
|
|
{ 0x380c, 0x03 }, /* total horiz timing high */
|
|
{ 0x380d, 0xa0 }, /* total horiz timing low */
|
|
{ 0x380e, 0x03 }, /* total vertical timing high */
|
|
{ 0x380f, 0x5c }, /* total vertical timing low */
|
|
{ 0x3810, 0x00 },
|
|
{ 0x3811, 0x04 },
|
|
{ 0x3812, 0x00 },
|
|
{ 0x3813, 0x05 },
|
|
{ 0x3814, 0x11 },
|
|
{ 0x3815, 0x11 },
|
|
{ 0x3820, 0x40 },
|
|
{ 0x3821, 0x00 },
|
|
{ 0x382f, 0x0e },
|
|
{ 0x3832, 0x00 },
|
|
{ 0x3833, 0x05 },
|
|
{ 0x3834, 0x00 },
|
|
{ 0x3835, 0x0c },
|
|
{ 0x3837, 0x00 },
|
|
{ 0x3b80, 0x00 },
|
|
{ 0x3b81, 0xa5 },
|
|
{ 0x3b82, 0x10 },
|
|
{ 0x3b83, 0x00 },
|
|
{ 0x3b84, 0x08 },
|
|
{ 0x3b85, 0x00 },
|
|
{ 0x3b86, 0x01 },
|
|
{ 0x3b87, 0x00 },
|
|
{ 0x3b88, 0x00 },
|
|
{ 0x3b89, 0x00 },
|
|
{ 0x3b8a, 0x00 },
|
|
{ 0x3b8b, 0x05 },
|
|
{ 0x3b8c, 0x00 },
|
|
{ 0x3b8d, 0x00 },
|
|
{ 0x3b8e, 0x00 },
|
|
{ 0x3b8f, 0x1a },
|
|
{ 0x3b94, 0x05 },
|
|
{ 0x3b95, 0xf2 },
|
|
{ 0x3b96, 0x40 },
|
|
{ 0x3c00, 0x89 },
|
|
{ 0x3c01, 0x63 },
|
|
{ 0x3c02, 0x01 },
|
|
{ 0x3c03, 0x00 },
|
|
{ 0x3c04, 0x00 },
|
|
{ 0x3c05, 0x03 },
|
|
{ 0x3c06, 0x00 },
|
|
{ 0x3c07, 0x06 },
|
|
{ 0x3c0c, 0x01 },
|
|
{ 0x3c0d, 0xd0 },
|
|
{ 0x3c0e, 0x02 },
|
|
{ 0x3c0f, 0x0a },
|
|
{ 0x4001, 0x42 },
|
|
{ 0x4004, 0x04 },
|
|
{ 0x4005, 0x00 },
|
|
{ 0x404e, 0x01 },
|
|
{ 0x4300, 0xff },
|
|
{ 0x4301, 0x00 },
|
|
{ 0x4315, 0x00 },
|
|
{ 0x4501, 0x48 },
|
|
{ 0x4600, 0x00 },
|
|
{ 0x4601, 0x4e },
|
|
{ 0x4801, 0x0f },
|
|
{ 0x4806, 0x0f },
|
|
{ 0x4819, 0xaa },
|
|
{ 0x4823, 0x3e },
|
|
{ 0x4837, 0x19 },
|
|
{ 0x4a0d, 0x00 },
|
|
{ 0x4a47, 0x7f },
|
|
{ 0x4a49, 0xf0 },
|
|
{ 0x4a4b, 0x30 },
|
|
{ 0x5000, 0x85 },
|
|
{ 0x5001, 0x80 },
|
|
};
|
|
|
|
static const struct reg_value ov7251_setting_vga_90fps[] = {
|
|
{ 0x3005, 0x00 },
|
|
{ 0x3012, 0xc0 },
|
|
{ 0x3013, 0xd2 },
|
|
{ 0x3014, 0x04 },
|
|
{ 0x3016, 0x10 },
|
|
{ 0x3017, 0x00 },
|
|
{ 0x3018, 0x00 },
|
|
{ 0x301a, 0x00 },
|
|
{ 0x301b, 0x00 },
|
|
{ 0x301c, 0x00 },
|
|
{ 0x3023, 0x05 },
|
|
{ 0x3037, 0xf0 },
|
|
{ 0x3098, 0x04 }, /* pll2 pre divider */
|
|
{ 0x3099, 0x28 }, /* pll2 multiplier */
|
|
{ 0x309a, 0x05 }, /* pll2 sys divider */
|
|
{ 0x309b, 0x04 }, /* pll2 adc divider */
|
|
{ 0x309d, 0x00 }, /* pll2 divider */
|
|
{ 0x30b0, 0x0a }, /* pll1 pix divider */
|
|
{ 0x30b1, 0x01 }, /* pll1 divider */
|
|
{ 0x30b3, 0x64 }, /* pll1 multiplier */
|
|
{ 0x30b4, 0x03 }, /* pll1 pre divider */
|
|
{ 0x30b5, 0x05 }, /* pll1 mipi divider */
|
|
{ 0x3106, 0xda },
|
|
{ 0x3503, 0x07 },
|
|
{ 0x3509, 0x10 },
|
|
{ 0x3600, 0x1c },
|
|
{ 0x3602, 0x62 },
|
|
{ 0x3620, 0xb7 },
|
|
{ 0x3622, 0x04 },
|
|
{ 0x3626, 0x21 },
|
|
{ 0x3627, 0x30 },
|
|
{ 0x3630, 0x44 },
|
|
{ 0x3631, 0x35 },
|
|
{ 0x3634, 0x60 },
|
|
{ 0x3636, 0x00 },
|
|
{ 0x3662, 0x01 },
|
|
{ 0x3663, 0x70 },
|
|
{ 0x3664, 0x50 },
|
|
{ 0x3666, 0x0a },
|
|
{ 0x3669, 0x1a },
|
|
{ 0x366a, 0x00 },
|
|
{ 0x366b, 0x50 },
|
|
{ 0x3673, 0x01 },
|
|
{ 0x3674, 0xff },
|
|
{ 0x3675, 0x03 },
|
|
{ 0x3705, 0xc1 },
|
|
{ 0x3709, 0x40 },
|
|
{ 0x373c, 0x08 },
|
|
{ 0x3742, 0x00 },
|
|
{ 0x3757, 0xb3 },
|
|
{ 0x3788, 0x00 },
|
|
{ 0x37a8, 0x01 },
|
|
{ 0x37a9, 0xc0 },
|
|
{ 0x3800, 0x00 },
|
|
{ 0x3801, 0x04 },
|
|
{ 0x3802, 0x00 },
|
|
{ 0x3803, 0x04 },
|
|
{ 0x3804, 0x02 },
|
|
{ 0x3805, 0x8b },
|
|
{ 0x3806, 0x01 },
|
|
{ 0x3807, 0xeb },
|
|
{ 0x3808, 0x02 }, /* width high */
|
|
{ 0x3809, 0x80 }, /* width low */
|
|
{ 0x380a, 0x01 }, /* height high */
|
|
{ 0x380b, 0xe0 }, /* height low */
|
|
{ 0x380c, 0x03 }, /* total horiz timing high */
|
|
{ 0x380d, 0xa0 }, /* total horiz timing low */
|
|
{ 0x380e, 0x02 }, /* total vertical timing high */
|
|
{ 0x380f, 0x3c }, /* total vertical timing low */
|
|
{ 0x3810, 0x00 },
|
|
{ 0x3811, 0x04 },
|
|
{ 0x3812, 0x00 },
|
|
{ 0x3813, 0x05 },
|
|
{ 0x3814, 0x11 },
|
|
{ 0x3815, 0x11 },
|
|
{ 0x3820, 0x40 },
|
|
{ 0x3821, 0x00 },
|
|
{ 0x382f, 0x0e },
|
|
{ 0x3832, 0x00 },
|
|
{ 0x3833, 0x05 },
|
|
{ 0x3834, 0x00 },
|
|
{ 0x3835, 0x0c },
|
|
{ 0x3837, 0x00 },
|
|
{ 0x3b80, 0x00 },
|
|
{ 0x3b81, 0xa5 },
|
|
{ 0x3b82, 0x10 },
|
|
{ 0x3b83, 0x00 },
|
|
{ 0x3b84, 0x08 },
|
|
{ 0x3b85, 0x00 },
|
|
{ 0x3b86, 0x01 },
|
|
{ 0x3b87, 0x00 },
|
|
{ 0x3b88, 0x00 },
|
|
{ 0x3b89, 0x00 },
|
|
{ 0x3b8a, 0x00 },
|
|
{ 0x3b8b, 0x05 },
|
|
{ 0x3b8c, 0x00 },
|
|
{ 0x3b8d, 0x00 },
|
|
{ 0x3b8e, 0x00 },
|
|
{ 0x3b8f, 0x1a },
|
|
{ 0x3b94, 0x05 },
|
|
{ 0x3b95, 0xf2 },
|
|
{ 0x3b96, 0x40 },
|
|
{ 0x3c00, 0x89 },
|
|
{ 0x3c01, 0x63 },
|
|
{ 0x3c02, 0x01 },
|
|
{ 0x3c03, 0x00 },
|
|
{ 0x3c04, 0x00 },
|
|
{ 0x3c05, 0x03 },
|
|
{ 0x3c06, 0x00 },
|
|
{ 0x3c07, 0x06 },
|
|
{ 0x3c0c, 0x01 },
|
|
{ 0x3c0d, 0xd0 },
|
|
{ 0x3c0e, 0x02 },
|
|
{ 0x3c0f, 0x0a },
|
|
{ 0x4001, 0x42 },
|
|
{ 0x4004, 0x04 },
|
|
{ 0x4005, 0x00 },
|
|
{ 0x404e, 0x01 },
|
|
{ 0x4300, 0xff },
|
|
{ 0x4301, 0x00 },
|
|
{ 0x4315, 0x00 },
|
|
{ 0x4501, 0x48 },
|
|
{ 0x4600, 0x00 },
|
|
{ 0x4601, 0x4e },
|
|
{ 0x4801, 0x0f },
|
|
{ 0x4806, 0x0f },
|
|
{ 0x4819, 0xaa },
|
|
{ 0x4823, 0x3e },
|
|
{ 0x4837, 0x19 },
|
|
{ 0x4a0d, 0x00 },
|
|
{ 0x4a47, 0x7f },
|
|
{ 0x4a49, 0xf0 },
|
|
{ 0x4a4b, 0x30 },
|
|
{ 0x5000, 0x85 },
|
|
{ 0x5001, 0x80 },
|
|
};
|
|
|
|
static const s64 link_freq[] = {
|
|
240000000,
|
|
};
|
|
|
|
static const struct ov7251_mode_info ov7251_mode_info_data[] = {
|
|
{
|
|
.width = 640,
|
|
.height = 480,
|
|
.data = ov7251_setting_vga_30fps,
|
|
.data_size = ARRAY_SIZE(ov7251_setting_vga_30fps),
|
|
.pixel_clock = 48000000,
|
|
.link_freq = 0, /* an index in link_freq[] */
|
|
.exposure_max = 1704,
|
|
.exposure_def = 504,
|
|
.timeperframe = {
|
|
.numerator = 100,
|
|
.denominator = 3000
|
|
}
|
|
},
|
|
{
|
|
.width = 640,
|
|
.height = 480,
|
|
.data = ov7251_setting_vga_60fps,
|
|
.data_size = ARRAY_SIZE(ov7251_setting_vga_60fps),
|
|
.pixel_clock = 48000000,
|
|
.link_freq = 0, /* an index in link_freq[] */
|
|
.exposure_max = 840,
|
|
.exposure_def = 504,
|
|
.timeperframe = {
|
|
.numerator = 100,
|
|
.denominator = 6014
|
|
}
|
|
},
|
|
{
|
|
.width = 640,
|
|
.height = 480,
|
|
.data = ov7251_setting_vga_90fps,
|
|
.data_size = ARRAY_SIZE(ov7251_setting_vga_90fps),
|
|
.pixel_clock = 48000000,
|
|
.link_freq = 0, /* an index in link_freq[] */
|
|
.exposure_max = 552,
|
|
.exposure_def = 504,
|
|
.timeperframe = {
|
|
.numerator = 100,
|
|
.denominator = 9043
|
|
}
|
|
},
|
|
};
|
|
|
|
static int ov7251_regulators_enable(struct ov7251 *ov7251)
|
|
{
|
|
int ret;
|
|
|
|
/* OV7251 power up sequence requires core regulator
|
|
* to be enabled not earlier than io regulator
|
|
*/
|
|
|
|
ret = regulator_enable(ov7251->io_regulator);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "set io voltage failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_enable(ov7251->analog_regulator);
|
|
if (ret) {
|
|
dev_err(ov7251->dev, "set analog voltage failed\n");
|
|
goto err_disable_io;
|
|
}
|
|
|
|
ret = regulator_enable(ov7251->core_regulator);
|
|
if (ret) {
|
|
dev_err(ov7251->dev, "set core voltage failed\n");
|
|
goto err_disable_analog;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_analog:
|
|
regulator_disable(ov7251->analog_regulator);
|
|
|
|
err_disable_io:
|
|
regulator_disable(ov7251->io_regulator);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ov7251_regulators_disable(struct ov7251 *ov7251)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_disable(ov7251->core_regulator);
|
|
if (ret < 0)
|
|
dev_err(ov7251->dev, "core regulator disable failed\n");
|
|
|
|
ret = regulator_disable(ov7251->analog_regulator);
|
|
if (ret < 0)
|
|
dev_err(ov7251->dev, "analog regulator disable failed\n");
|
|
|
|
ret = regulator_disable(ov7251->io_regulator);
|
|
if (ret < 0)
|
|
dev_err(ov7251->dev, "io regulator disable failed\n");
|
|
}
|
|
|
|
static int ov7251_write_reg(struct ov7251 *ov7251, u16 reg, u8 val)
|
|
{
|
|
u8 regbuf[3];
|
|
int ret;
|
|
|
|
regbuf[0] = reg >> 8;
|
|
regbuf[1] = reg & 0xff;
|
|
regbuf[2] = val;
|
|
|
|
ret = i2c_master_send(ov7251->i2c_client, regbuf, 3);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "%s: write reg error %d: reg=%x, val=%x\n",
|
|
__func__, ret, reg, val);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_write_seq_regs(struct ov7251 *ov7251, u16 reg, u8 *val,
|
|
u8 num)
|
|
{
|
|
u8 regbuf[5];
|
|
u8 nregbuf = sizeof(reg) + num * sizeof(*val);
|
|
int ret = 0;
|
|
|
|
if (nregbuf > sizeof(regbuf))
|
|
return -EINVAL;
|
|
|
|
regbuf[0] = reg >> 8;
|
|
regbuf[1] = reg & 0xff;
|
|
|
|
memcpy(regbuf + 2, val, num);
|
|
|
|
ret = i2c_master_send(ov7251->i2c_client, regbuf, nregbuf);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev,
|
|
"%s: write seq regs error %d: first reg=%x\n",
|
|
__func__, ret, reg);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_read_reg(struct ov7251 *ov7251, u16 reg, u8 *val)
|
|
{
|
|
u8 regbuf[2];
|
|
int ret;
|
|
|
|
regbuf[0] = reg >> 8;
|
|
regbuf[1] = reg & 0xff;
|
|
|
|
ret = i2c_master_send(ov7251->i2c_client, regbuf, 2);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "%s: write reg error %d: reg=%x\n",
|
|
__func__, ret, reg);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_master_recv(ov7251->i2c_client, val, 1);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "%s: read reg error %d: reg=%x\n",
|
|
__func__, ret, reg);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_set_exposure(struct ov7251 *ov7251, s32 exposure)
|
|
{
|
|
u16 reg;
|
|
u8 val[3];
|
|
|
|
reg = OV7251_AEC_EXPO_0;
|
|
val[0] = (exposure & 0xf000) >> 12; /* goes to OV7251_AEC_EXPO_0 */
|
|
val[1] = (exposure & 0x0ff0) >> 4; /* goes to OV7251_AEC_EXPO_1 */
|
|
val[2] = (exposure & 0x000f) << 4; /* goes to OV7251_AEC_EXPO_2 */
|
|
|
|
return ov7251_write_seq_regs(ov7251, reg, val, 3);
|
|
}
|
|
|
|
static int ov7251_set_gain(struct ov7251 *ov7251, s32 gain)
|
|
{
|
|
u16 reg;
|
|
u8 val[2];
|
|
|
|
reg = OV7251_AEC_AGC_ADJ_0;
|
|
val[0] = (gain & 0x0300) >> 8; /* goes to OV7251_AEC_AGC_ADJ_0 */
|
|
val[1] = gain & 0xff; /* goes to OV7251_AEC_AGC_ADJ_1 */
|
|
|
|
return ov7251_write_seq_regs(ov7251, reg, val, 2);
|
|
}
|
|
|
|
static int ov7251_set_register_array(struct ov7251 *ov7251,
|
|
const struct reg_value *settings,
|
|
unsigned int num_settings)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < num_settings; ++i, ++settings) {
|
|
ret = ov7251_write_reg(ov7251, settings->reg, settings->val);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_set_power_on(struct ov7251 *ov7251)
|
|
{
|
|
int ret;
|
|
u32 wait_us;
|
|
|
|
ret = ov7251_regulators_enable(ov7251);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(ov7251->xclk);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "clk prepare enable failed\n");
|
|
ov7251_regulators_disable(ov7251);
|
|
return ret;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(ov7251->enable_gpio, 1);
|
|
|
|
/* wait at least 65536 external clock cycles */
|
|
wait_us = DIV_ROUND_UP(65536 * 1000,
|
|
DIV_ROUND_UP(ov7251->xclk_freq, 1000));
|
|
usleep_range(wait_us, wait_us + 1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ov7251_set_power_off(struct ov7251 *ov7251)
|
|
{
|
|
clk_disable_unprepare(ov7251->xclk);
|
|
gpiod_set_value_cansleep(ov7251->enable_gpio, 0);
|
|
ov7251_regulators_disable(ov7251);
|
|
}
|
|
|
|
static int ov7251_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
|
|
/* If the power state is not modified - no work to do. */
|
|
if (ov7251->power_on == !!on)
|
|
goto exit;
|
|
|
|
if (on) {
|
|
ret = ov7251_set_power_on(ov7251);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = ov7251_set_register_array(ov7251,
|
|
ov7251_global_init_setting,
|
|
ARRAY_SIZE(ov7251_global_init_setting));
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "could not set init registers\n");
|
|
ov7251_set_power_off(ov7251);
|
|
goto exit;
|
|
}
|
|
|
|
ov7251->power_on = true;
|
|
} else {
|
|
ov7251_set_power_off(ov7251);
|
|
ov7251->power_on = false;
|
|
}
|
|
|
|
exit:
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_set_hflip(struct ov7251 *ov7251, s32 value)
|
|
{
|
|
u8 val = ov7251->timing_format2;
|
|
int ret;
|
|
|
|
if (value)
|
|
val |= OV7251_TIMING_FORMAT2_MIRROR;
|
|
else
|
|
val &= ~OV7251_TIMING_FORMAT2_MIRROR;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_TIMING_FORMAT2, val);
|
|
if (!ret)
|
|
ov7251->timing_format2 = val;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_set_vflip(struct ov7251 *ov7251, s32 value)
|
|
{
|
|
u8 val = ov7251->timing_format1;
|
|
int ret;
|
|
|
|
if (value)
|
|
val |= OV7251_TIMING_FORMAT1_VFLIP;
|
|
else
|
|
val &= ~OV7251_TIMING_FORMAT1_VFLIP;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_TIMING_FORMAT1, val);
|
|
if (!ret)
|
|
ov7251->timing_format1 = val;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_set_test_pattern(struct ov7251 *ov7251, s32 value)
|
|
{
|
|
u8 val = ov7251->pre_isp_00;
|
|
int ret;
|
|
|
|
if (value)
|
|
val |= OV7251_PRE_ISP_00_TEST_PATTERN;
|
|
else
|
|
val &= ~OV7251_PRE_ISP_00_TEST_PATTERN;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PRE_ISP_00, val);
|
|
if (!ret)
|
|
ov7251->pre_isp_00 = val;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const char * const ov7251_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Vertical Pattern Bars",
|
|
};
|
|
|
|
static int ov7251_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct ov7251 *ov7251 = container_of(ctrl->handler,
|
|
struct ov7251, ctrls);
|
|
int ret;
|
|
|
|
/* v4l2_ctrl_lock() locks our mutex */
|
|
|
|
if (!ov7251->power_on)
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = ov7251_set_exposure(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_GAIN:
|
|
ret = ov7251_set_gain(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = ov7251_set_test_pattern(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
ret = ov7251_set_hflip(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_VFLIP:
|
|
ret = ov7251_set_vflip(ov7251, ctrl->val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops ov7251_ctrl_ops = {
|
|
.s_ctrl = ov7251_s_ctrl,
|
|
};
|
|
|
|
static int ov7251_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_Y10_1X10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_enum_frame_size(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->code != MEDIA_BUS_FMT_Y10_1X10)
|
|
return -EINVAL;
|
|
|
|
if (fse->index >= ARRAY_SIZE(ov7251_mode_info_data))
|
|
return -EINVAL;
|
|
|
|
fse->min_width = ov7251_mode_info_data[fse->index].width;
|
|
fse->max_width = ov7251_mode_info_data[fse->index].width;
|
|
fse->min_height = ov7251_mode_info_data[fse->index].height;
|
|
fse->max_height = ov7251_mode_info_data[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_enum_frame_ival(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
unsigned int index = fie->index;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ov7251_mode_info_data); i++) {
|
|
if (fie->width != ov7251_mode_info_data[i].width ||
|
|
fie->height != ov7251_mode_info_data[i].height)
|
|
continue;
|
|
|
|
if (index-- == 0) {
|
|
fie->interval = ov7251_mode_info_data[i].timeperframe;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
__ov7251_get_pad_format(struct ov7251 *ov7251,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad,
|
|
enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_get_try_format(&ov7251->sd, sd_state, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &ov7251->fmt;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static int ov7251_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
format->format = *__ov7251_get_pad_format(ov7251, sd_state,
|
|
format->pad,
|
|
format->which);
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct v4l2_rect *
|
|
__ov7251_get_pad_crop(struct ov7251 *ov7251,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad, enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_get_try_crop(&ov7251->sd, sd_state, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &ov7251->crop;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static inline u32 avg_fps(const struct v4l2_fract *t)
|
|
{
|
|
return (t->denominator + (t->numerator >> 1)) / t->numerator;
|
|
}
|
|
|
|
static const struct ov7251_mode_info *
|
|
ov7251_find_mode_by_ival(struct ov7251 *ov7251, struct v4l2_fract *timeperframe)
|
|
{
|
|
const struct ov7251_mode_info *mode = ov7251->current_mode;
|
|
unsigned int fps_req = avg_fps(timeperframe);
|
|
unsigned int max_dist_match = (unsigned int) -1;
|
|
unsigned int i, n = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ov7251_mode_info_data); i++) {
|
|
unsigned int dist;
|
|
unsigned int fps_tmp;
|
|
|
|
if (mode->width != ov7251_mode_info_data[i].width ||
|
|
mode->height != ov7251_mode_info_data[i].height)
|
|
continue;
|
|
|
|
fps_tmp = avg_fps(&ov7251_mode_info_data[i].timeperframe);
|
|
|
|
dist = abs(fps_req - fps_tmp);
|
|
|
|
if (dist < max_dist_match) {
|
|
n = i;
|
|
max_dist_match = dist;
|
|
}
|
|
}
|
|
|
|
return &ov7251_mode_info_data[n];
|
|
}
|
|
|
|
static int ov7251_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
struct v4l2_mbus_framefmt *__format;
|
|
struct v4l2_rect *__crop;
|
|
const struct ov7251_mode_info *new_mode;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
|
|
__crop = __ov7251_get_pad_crop(ov7251, sd_state, format->pad,
|
|
format->which);
|
|
|
|
new_mode = v4l2_find_nearest_size(ov7251_mode_info_data,
|
|
ARRAY_SIZE(ov7251_mode_info_data),
|
|
width, height,
|
|
format->format.width, format->format.height);
|
|
|
|
__crop->width = new_mode->width;
|
|
__crop->height = new_mode->height;
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
|
|
ret = __v4l2_ctrl_s_ctrl_int64(ov7251->pixel_clock,
|
|
new_mode->pixel_clock);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->link_freq,
|
|
new_mode->link_freq);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_modify_range(ov7251->exposure,
|
|
1, new_mode->exposure_max,
|
|
1, new_mode->exposure_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->exposure,
|
|
new_mode->exposure_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->gain, 16);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ov7251->current_mode = new_mode;
|
|
}
|
|
|
|
__format = __ov7251_get_pad_format(ov7251, sd_state, format->pad,
|
|
format->which);
|
|
__format->width = __crop->width;
|
|
__format->height = __crop->height;
|
|
__format->code = MEDIA_BUS_FMT_Y10_1X10;
|
|
__format->field = V4L2_FIELD_NONE;
|
|
__format->colorspace = V4L2_COLORSPACE_SRGB;
|
|
__format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
|
|
__format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
|
|
__format->colorspace, __format->ycbcr_enc);
|
|
__format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
|
|
|
|
format->format = *__format;
|
|
|
|
exit:
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_entity_init_cfg(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state)
|
|
{
|
|
struct v4l2_subdev_format fmt = {
|
|
.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY
|
|
: V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
.format = {
|
|
.width = 640,
|
|
.height = 480
|
|
}
|
|
};
|
|
|
|
ov7251_set_format(subdev, sd_state, &fmt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
|
|
if (sel->target != V4L2_SEL_TGT_CROP)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
sel->r = *__ov7251_get_pad_crop(ov7251, sd_state, sel->pad,
|
|
sel->which);
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_s_stream(struct v4l2_subdev *subdev, int enable)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(subdev);
|
|
int ret;
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
|
|
if (enable) {
|
|
ret = ov7251_set_register_array(ov7251,
|
|
ov7251->current_mode->data,
|
|
ov7251->current_mode->data_size);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "could not set mode %dx%d\n",
|
|
ov7251->current_mode->width,
|
|
ov7251->current_mode->height);
|
|
goto exit;
|
|
}
|
|
ret = __v4l2_ctrl_handler_setup(&ov7251->ctrls);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "could not sync v4l2 controls\n");
|
|
goto exit;
|
|
}
|
|
ret = ov7251_write_reg(ov7251, OV7251_SC_MODE_SELECT,
|
|
OV7251_SC_MODE_SELECT_STREAMING);
|
|
} else {
|
|
ret = ov7251_write_reg(ov7251, OV7251_SC_MODE_SELECT,
|
|
OV7251_SC_MODE_SELECT_SW_STANDBY);
|
|
}
|
|
|
|
exit:
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_get_frame_interval(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(subdev);
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
fi->interval = ov7251->current_mode->timeperframe;
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_set_frame_interval(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(subdev);
|
|
const struct ov7251_mode_info *new_mode;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
new_mode = ov7251_find_mode_by_ival(ov7251, &fi->interval);
|
|
|
|
if (new_mode != ov7251->current_mode) {
|
|
ret = __v4l2_ctrl_s_ctrl_int64(ov7251->pixel_clock,
|
|
new_mode->pixel_clock);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->link_freq,
|
|
new_mode->link_freq);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_modify_range(ov7251->exposure,
|
|
1, new_mode->exposure_max,
|
|
1, new_mode->exposure_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->exposure,
|
|
new_mode->exposure_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->gain, 16);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ov7251->current_mode = new_mode;
|
|
}
|
|
|
|
fi->interval = ov7251->current_mode->timeperframe;
|
|
|
|
exit:
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_subdev_core_ops ov7251_core_ops = {
|
|
.s_power = ov7251_s_power,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops ov7251_video_ops = {
|
|
.s_stream = ov7251_s_stream,
|
|
.g_frame_interval = ov7251_get_frame_interval,
|
|
.s_frame_interval = ov7251_set_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops ov7251_subdev_pad_ops = {
|
|
.init_cfg = ov7251_entity_init_cfg,
|
|
.enum_mbus_code = ov7251_enum_mbus_code,
|
|
.enum_frame_size = ov7251_enum_frame_size,
|
|
.enum_frame_interval = ov7251_enum_frame_ival,
|
|
.get_fmt = ov7251_get_format,
|
|
.set_fmt = ov7251_set_format,
|
|
.get_selection = ov7251_get_selection,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops ov7251_subdev_ops = {
|
|
.core = &ov7251_core_ops,
|
|
.video = &ov7251_video_ops,
|
|
.pad = &ov7251_subdev_pad_ops,
|
|
};
|
|
|
|
static int ov7251_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct fwnode_handle *endpoint;
|
|
struct ov7251 *ov7251;
|
|
u8 chip_id_high, chip_id_low, chip_rev;
|
|
int ret;
|
|
|
|
ov7251 = devm_kzalloc(dev, sizeof(struct ov7251), GFP_KERNEL);
|
|
if (!ov7251)
|
|
return -ENOMEM;
|
|
|
|
ov7251->i2c_client = client;
|
|
ov7251->dev = dev;
|
|
|
|
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
|
|
if (!endpoint) {
|
|
dev_err(dev, "endpoint node not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = v4l2_fwnode_endpoint_parse(endpoint, &ov7251->ep);
|
|
fwnode_handle_put(endpoint);
|
|
if (ret < 0) {
|
|
dev_err(dev, "parsing endpoint node failed\n");
|
|
return ret;
|
|
}
|
|
|
|
if (ov7251->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
|
|
dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
|
|
ov7251->ep.bus_type, V4L2_MBUS_CSI2_DPHY);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* get system clock (xclk) */
|
|
ov7251->xclk = devm_clk_get(dev, "xclk");
|
|
if (IS_ERR(ov7251->xclk)) {
|
|
dev_err(dev, "could not get xclk");
|
|
return PTR_ERR(ov7251->xclk);
|
|
}
|
|
|
|
ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
|
|
&ov7251->xclk_freq);
|
|
if (ret) {
|
|
dev_err(dev, "could not get xclk frequency\n");
|
|
return ret;
|
|
}
|
|
|
|
/* external clock must be 24MHz, allow 1% tolerance */
|
|
if (ov7251->xclk_freq < 23760000 || ov7251->xclk_freq > 24240000) {
|
|
dev_err(dev, "external clock frequency %u is not supported\n",
|
|
ov7251->xclk_freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = clk_set_rate(ov7251->xclk, ov7251->xclk_freq);
|
|
if (ret) {
|
|
dev_err(dev, "could not set xclk frequency\n");
|
|
return ret;
|
|
}
|
|
|
|
ov7251->io_regulator = devm_regulator_get(dev, "vdddo");
|
|
if (IS_ERR(ov7251->io_regulator)) {
|
|
dev_err(dev, "cannot get io regulator\n");
|
|
return PTR_ERR(ov7251->io_regulator);
|
|
}
|
|
|
|
ov7251->core_regulator = devm_regulator_get(dev, "vddd");
|
|
if (IS_ERR(ov7251->core_regulator)) {
|
|
dev_err(dev, "cannot get core regulator\n");
|
|
return PTR_ERR(ov7251->core_regulator);
|
|
}
|
|
|
|
ov7251->analog_regulator = devm_regulator_get(dev, "vdda");
|
|
if (IS_ERR(ov7251->analog_regulator)) {
|
|
dev_err(dev, "cannot get analog regulator\n");
|
|
return PTR_ERR(ov7251->analog_regulator);
|
|
}
|
|
|
|
ov7251->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(ov7251->enable_gpio)) {
|
|
dev_err(dev, "cannot get enable gpio\n");
|
|
return PTR_ERR(ov7251->enable_gpio);
|
|
}
|
|
|
|
mutex_init(&ov7251->lock);
|
|
|
|
v4l2_ctrl_handler_init(&ov7251->ctrls, 7);
|
|
ov7251->ctrls.lock = &ov7251->lock;
|
|
|
|
v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
ov7251->exposure = v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_EXPOSURE, 1, 32, 1, 32);
|
|
ov7251->gain = v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_GAIN, 16, 1023, 1, 16);
|
|
v4l2_ctrl_new_std_menu_items(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(ov7251_test_pattern_menu) - 1,
|
|
0, 0, ov7251_test_pattern_menu);
|
|
ov7251->pixel_clock = v4l2_ctrl_new_std(&ov7251->ctrls,
|
|
&ov7251_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE,
|
|
1, INT_MAX, 1, 1);
|
|
ov7251->link_freq = v4l2_ctrl_new_int_menu(&ov7251->ctrls,
|
|
&ov7251_ctrl_ops,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE(link_freq) - 1,
|
|
0, link_freq);
|
|
if (ov7251->link_freq)
|
|
ov7251->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
ov7251->sd.ctrl_handler = &ov7251->ctrls;
|
|
|
|
if (ov7251->ctrls.error) {
|
|
dev_err(dev, "%s: control initialization error %d\n",
|
|
__func__, ov7251->ctrls.error);
|
|
ret = ov7251->ctrls.error;
|
|
goto free_ctrl;
|
|
}
|
|
|
|
v4l2_i2c_subdev_init(&ov7251->sd, client, &ov7251_subdev_ops);
|
|
ov7251->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
ov7251->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
ov7251->sd.dev = &client->dev;
|
|
ov7251->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
|
|
ret = media_entity_pads_init(&ov7251->sd.entity, 1, &ov7251->pad);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not register media entity\n");
|
|
goto free_ctrl;
|
|
}
|
|
|
|
ret = ov7251_s_power(&ov7251->sd, true);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not power up OV7251\n");
|
|
goto free_entity;
|
|
}
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_HIGH, &chip_id_high);
|
|
if (ret < 0 || chip_id_high != OV7251_CHIP_ID_HIGH_BYTE) {
|
|
dev_err(dev, "could not read ID high\n");
|
|
ret = -ENODEV;
|
|
goto power_down;
|
|
}
|
|
ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_LOW, &chip_id_low);
|
|
if (ret < 0 || chip_id_low != OV7251_CHIP_ID_LOW_BYTE) {
|
|
dev_err(dev, "could not read ID low\n");
|
|
ret = -ENODEV;
|
|
goto power_down;
|
|
}
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_SC_GP_IO_IN1, &chip_rev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not read revision\n");
|
|
ret = -ENODEV;
|
|
goto power_down;
|
|
}
|
|
chip_rev >>= 4;
|
|
|
|
dev_info(dev, "OV7251 revision %x (%s) detected at address 0x%02x\n",
|
|
chip_rev,
|
|
chip_rev == 0x4 ? "1A / 1B" :
|
|
chip_rev == 0x5 ? "1C / 1D" :
|
|
chip_rev == 0x6 ? "1E" :
|
|
chip_rev == 0x7 ? "1F" : "unknown",
|
|
client->addr);
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_PRE_ISP_00,
|
|
&ov7251->pre_isp_00);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not read test pattern value\n");
|
|
ret = -ENODEV;
|
|
goto power_down;
|
|
}
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_TIMING_FORMAT1,
|
|
&ov7251->timing_format1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not read vflip value\n");
|
|
ret = -ENODEV;
|
|
goto power_down;
|
|
}
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_TIMING_FORMAT2,
|
|
&ov7251->timing_format2);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not read hflip value\n");
|
|
ret = -ENODEV;
|
|
goto power_down;
|
|
}
|
|
|
|
ov7251_s_power(&ov7251->sd, false);
|
|
|
|
ret = v4l2_async_register_subdev(&ov7251->sd);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not register v4l2 device\n");
|
|
goto free_entity;
|
|
}
|
|
|
|
ov7251_entity_init_cfg(&ov7251->sd, NULL);
|
|
|
|
return 0;
|
|
|
|
power_down:
|
|
ov7251_s_power(&ov7251->sd, false);
|
|
free_entity:
|
|
media_entity_cleanup(&ov7251->sd.entity);
|
|
free_ctrl:
|
|
v4l2_ctrl_handler_free(&ov7251->ctrls);
|
|
mutex_destroy(&ov7251->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
|
|
v4l2_async_unregister_subdev(&ov7251->sd);
|
|
media_entity_cleanup(&ov7251->sd.entity);
|
|
v4l2_ctrl_handler_free(&ov7251->ctrls);
|
|
mutex_destroy(&ov7251->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ov7251_of_match[] = {
|
|
{ .compatible = "ovti,ov7251" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ov7251_of_match);
|
|
|
|
static struct i2c_driver ov7251_i2c_driver = {
|
|
.driver = {
|
|
.of_match_table = ov7251_of_match,
|
|
.name = "ov7251",
|
|
},
|
|
.probe_new = ov7251_probe,
|
|
.remove = ov7251_remove,
|
|
};
|
|
|
|
module_i2c_driver(ov7251_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Omnivision OV7251 Camera Driver");
|
|
MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>");
|
|
MODULE_LICENSE("GPL v2");
|