Nuno Sa 561e2e3e90 iio: dac: ad9739a: write complete MU_CNT1 register during lock ... As specified by the datasheet we should write the value 0x3 (enable plus tracking gain) into the MU_CNT1 register during the MU lock phase. Currently we were only setting the enable bit (bit 0) as the tracking gain default value is already set to 1. While we should be mostly fine in assuming the tracking gain will have the value it should, better to explicitly write it. On top of that the datasheet also states to re-attempt the writes in case the lock fails which we were not doing for the tracking gain bit. Lastly, the recommended value for the MU phase slope lock (bit 6) is 0 but for some reason the default value is 1 and hence, we were not changing it accordingly. Note there was no problem with the MU lock mechanism so this is not being treated as a fix but rather an improvement. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240429-ad9739a-improv-v1-1-c076a06a697d@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2024-04-29 21:11:12 +01:00
..
ad3552r.c	iio: dac: ad3552: Use __free(fwnode_handle) to simplify error handling.	2024-04-06 11:29:06 +01:00
ad5064.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
ad5360.c	iio: dac: ad5360: Fix alignment for DMA safety	2022-06-14 11:53:15 +01:00
ad5380.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
ad5421.c	iio: dac: ad5421: Fix alignment for DMA safety	2022-06-14 11:53:15 +01:00
ad5446.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
ad5449.c	iio: dac: ad5449: Fix alignment for DMA safety	2022-06-14 11:53:15 +01:00
ad5504.c	iio: dac: ad5504: Fix alignment for DMA safety	2022-06-14 11:53:16 +01:00
ad5592r-base.c	drivers: iio: dac: ad5592r: add gpio_chip names	2023-03-11 12:18:28 +00:00
ad5592r-base.h	iio: dac: ad5592r: Fix alignment for DMA safety	2022-06-14 11:53:16 +01:00
ad5592r.c	Char/Misc and other driver updates for 5.18-rc1	2022-03-28 12:27:35 -07:00
ad5593r.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
ad5624r_spi.c	iio: Replace strtobool() with kstrtobool()	2022-04-28 19:22:54 +01:00
ad5624r.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177	2019-05-30 11:29:19 -07:00
ad5686-spi.c	Char/Misc and other driver updates for 5.18-rc1	2022-03-28 12:27:35 -07:00
ad5686.c	iio: dac: ad5686: Add support for AD5337	2022-12-28 17:19:45 +00:00
ad5686.h	iio: dac: ad5686: Add support for AD5337	2022-12-28 17:19:45 +00:00
ad5696-i2c.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
ad5755.c	iio: dac: ad5755: make use of of_device_id table	2024-04-13 18:12:14 +01:00
ad5758.c	iio:dac:ad5758: Drop unused of specific headers.	2021-12-12 17:12:34 +00:00
ad5761.c	iio: dac: ad5761: Fix alignment for DMA safety	2022-06-14 11:53:16 +01:00
ad5764.c	iio: dac: ad5764: Fix alignment for DMA safety	2022-06-14 11:53:16 +01:00
ad5766.c	iio: dac: ad5766: Fix alignment for DMA safety	2022-06-14 11:53:16 +01:00
ad5770r.c	iio: dac: ad5770r: Use device_for_each_child_node_scoped()	2024-04-06 11:18:51 +01:00
ad5791.c	iio: dac: ad5791: Add support for controlling RBUF via devicetree	2023-12-04 13:19:48 +00:00
ad7293.c	iio: dac: ad7293: Fix alignment for DMA safety	2022-06-14 11:53:16 +01:00
ad7303.c	iio: dac: ad7303: Fix alignment for DMA safety	2022-06-14 11:53:16 +01:00
ad8801.c	iio: dac: ad8801: Fix alignment for DMA safety	2022-06-14 11:53:17 +01:00
ad9739a.c	iio: dac: ad9739a: write complete MU_CNT1 register during lock	2024-04-29 21:11:12 +01:00
adi-axi-dac.c	iio: dac: adi-axi: fix a mistake in axi_dac_ext_info_set()	2024-04-29 20:53:25 +01:00
cio-dac.c	1st set of IIO new device support, features and cleanups for the 6.4 cycle.	2023-04-12 09:45:34 +02:00
dpot-dac.c	iio: dac: dpot-dac: Convert to platform remove callback returning void	2023-09-23 15:06:55 +01:00
ds4424.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
Kconfig	iio: dac: support the ad9739a RF DAC	2024-04-20 15:41:32 +01:00
lpc18xx_dac.c	iio: dac: lpc18xx_dac: Convert to platform remove callback returning void	2023-09-23 15:06:55 +01:00
ltc1660.c	iio: dac: ltc1660: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()	2022-07-18 18:48:18 +01:00
ltc2632.c	iio: dac: ltc2632: Make use of device properties	2022-04-28 19:34:10 +01:00
ltc2688.c	iio: dac: ltc2688: Use device_for_each_child_node_scoped()	2024-03-25 19:50:09 +00:00
m62332.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
Makefile	iio: dac: support the ad9739a RF DAC	2024-04-20 15:41:32 +01:00
max517.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
max5522.c	iio: dac: set variable max5522_channels storage-class-specifier to static	2023-04-10 12:26:34 +01:00
max5821.c	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
mcp4725.c	iio: dac: mcp4725: Add dac_reg_offset to struct mcp4725_chip_info	2023-09-12 10:42:04 +01:00
mcp4728.c	iio: add MCP4728 I2C DAC driver	2023-08-05 19:29:39 +01:00
mcp4821.c	iio: dac: mcp4821: Switch to including mod_devicetable.h for struct of_device_id definition.	2024-02-28 19:26:35 +00:00
mcp4922.c	iio: dac: mcp4922: add support to mcp4921	2022-07-01 11:19:08 +01:00
stm32-dac-core.c	iio: Use device_get_match_data()	2023-10-14 17:18:36 +01:00
stm32-dac-core.h
stm32-dac.c	iio: dac: stm32-dac: Convert to platform remove callback returning void	2023-09-23 15:06:55 +01:00
ti-dac082s085.c	iio: dac: ti-dac082s085: Fix alignment for DMA safety	2022-06-14 11:53:17 +01:00
ti-dac5571.c	iio: dac: ti-dac5571: Add DAC081C081 support	2024-03-28 13:22:15 +00:00
ti-dac7311.c	iio: dac: ti-dac7311: Fix alignment for DMA safety	2022-06-14 11:53:17 +01:00
ti-dac7612.c	iio: dac: ti-dac7612: Fix alignment for DMA safety	2022-06-14 11:53:17 +01:00
vf610_dac.c	iio: dac: vf610: Convert to platform remove callback returning void	2023-09-23 15:06:55 +01:00