mirror of
https://github.com/torvalds/linux.git
synced 2024-11-27 06:31:52 +00:00
032e160305
Every now and then I see fstests failures on aarch64 (64k pages) that trigger on the following sequence: mkfs.xfs $dev mount $dev $mnt touch $mnt/a umount $mnt xfs_db -c 'path /a' -c 'print' $dev 99% of the time this succeeds, but every now and then xfs_db cannot find /a and fails. This turns out to be a race involving udev/blkid, the page cache for the block device, and the xfs_db process. udev is triggered whenever anyone closes a block device or unmounts it. The default udev rules invoke blkid to read the fs super and create symlinks to the bdev under /dev/disk. For this, it uses buffered reads through the page cache. xfs_db also uses buffered reads to examine metadata. There is no coordination between xfs_db and udev, which means that they can run concurrently. Note there is no coordination between the kernel and blkid either. On a system with 64k pages, the page cache can cache the superblock and the root inode (and hence the root dir) with the same 64k page. If udev spawns blkid after the mkfs and the system is busy enough that it is still running when xfs_db starts up, they'll both read from the same page in the pagecache. The unmount writes updated inode metadata to disk directly. The XFS buffer cache does not use the bdev pagecache, nor does it invalidate the pagecache on umount. If the above scenario occurs, the pagecache no longer reflects what's on disk, xfs_db reads the stale metadata, and fails to find /a. Most of the time this succeeds because closing a bdev invalidates the page cache, but when processes race, everyone loses. Fix the problem by invalidating the bdev pagecache after flushing the bdev, so that xfs_db will see up to date metadata. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2368 lines
58 KiB
C
2368 lines
58 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
|
|
* All Rights Reserved.
|
|
*/
|
|
#include "xfs.h"
|
|
#include <linux/backing-dev.h>
|
|
#include <linux/dax.h>
|
|
|
|
#include "xfs_shared.h"
|
|
#include "xfs_format.h"
|
|
#include "xfs_log_format.h"
|
|
#include "xfs_trans_resv.h"
|
|
#include "xfs_mount.h"
|
|
#include "xfs_trace.h"
|
|
#include "xfs_log.h"
|
|
#include "xfs_log_recover.h"
|
|
#include "xfs_log_priv.h"
|
|
#include "xfs_trans.h"
|
|
#include "xfs_buf_item.h"
|
|
#include "xfs_errortag.h"
|
|
#include "xfs_error.h"
|
|
#include "xfs_ag.h"
|
|
|
|
struct kmem_cache *xfs_buf_cache;
|
|
|
|
/*
|
|
* Locking orders
|
|
*
|
|
* xfs_buf_ioacct_inc:
|
|
* xfs_buf_ioacct_dec:
|
|
* b_sema (caller holds)
|
|
* b_lock
|
|
*
|
|
* xfs_buf_stale:
|
|
* b_sema (caller holds)
|
|
* b_lock
|
|
* lru_lock
|
|
*
|
|
* xfs_buf_rele:
|
|
* b_lock
|
|
* pag_buf_lock
|
|
* lru_lock
|
|
*
|
|
* xfs_buftarg_drain_rele
|
|
* lru_lock
|
|
* b_lock (trylock due to inversion)
|
|
*
|
|
* xfs_buftarg_isolate
|
|
* lru_lock
|
|
* b_lock (trylock due to inversion)
|
|
*/
|
|
|
|
static int __xfs_buf_submit(struct xfs_buf *bp, bool wait);
|
|
|
|
static inline int
|
|
xfs_buf_submit(
|
|
struct xfs_buf *bp)
|
|
{
|
|
return __xfs_buf_submit(bp, !(bp->b_flags & XBF_ASYNC));
|
|
}
|
|
|
|
static inline int
|
|
xfs_buf_is_vmapped(
|
|
struct xfs_buf *bp)
|
|
{
|
|
/*
|
|
* Return true if the buffer is vmapped.
|
|
*
|
|
* b_addr is null if the buffer is not mapped, but the code is clever
|
|
* enough to know it doesn't have to map a single page, so the check has
|
|
* to be both for b_addr and bp->b_page_count > 1.
|
|
*/
|
|
return bp->b_addr && bp->b_page_count > 1;
|
|
}
|
|
|
|
static inline int
|
|
xfs_buf_vmap_len(
|
|
struct xfs_buf *bp)
|
|
{
|
|
return (bp->b_page_count * PAGE_SIZE);
|
|
}
|
|
|
|
/*
|
|
* Bump the I/O in flight count on the buftarg if we haven't yet done so for
|
|
* this buffer. The count is incremented once per buffer (per hold cycle)
|
|
* because the corresponding decrement is deferred to buffer release. Buffers
|
|
* can undergo I/O multiple times in a hold-release cycle and per buffer I/O
|
|
* tracking adds unnecessary overhead. This is used for sychronization purposes
|
|
* with unmount (see xfs_buftarg_drain()), so all we really need is a count of
|
|
* in-flight buffers.
|
|
*
|
|
* Buffers that are never released (e.g., superblock, iclog buffers) must set
|
|
* the XBF_NO_IOACCT flag before I/O submission. Otherwise, the buftarg count
|
|
* never reaches zero and unmount hangs indefinitely.
|
|
*/
|
|
static inline void
|
|
xfs_buf_ioacct_inc(
|
|
struct xfs_buf *bp)
|
|
{
|
|
if (bp->b_flags & XBF_NO_IOACCT)
|
|
return;
|
|
|
|
ASSERT(bp->b_flags & XBF_ASYNC);
|
|
spin_lock(&bp->b_lock);
|
|
if (!(bp->b_state & XFS_BSTATE_IN_FLIGHT)) {
|
|
bp->b_state |= XFS_BSTATE_IN_FLIGHT;
|
|
percpu_counter_inc(&bp->b_target->bt_io_count);
|
|
}
|
|
spin_unlock(&bp->b_lock);
|
|
}
|
|
|
|
/*
|
|
* Clear the in-flight state on a buffer about to be released to the LRU or
|
|
* freed and unaccount from the buftarg.
|
|
*/
|
|
static inline void
|
|
__xfs_buf_ioacct_dec(
|
|
struct xfs_buf *bp)
|
|
{
|
|
lockdep_assert_held(&bp->b_lock);
|
|
|
|
if (bp->b_state & XFS_BSTATE_IN_FLIGHT) {
|
|
bp->b_state &= ~XFS_BSTATE_IN_FLIGHT;
|
|
percpu_counter_dec(&bp->b_target->bt_io_count);
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
xfs_buf_ioacct_dec(
|
|
struct xfs_buf *bp)
|
|
{
|
|
spin_lock(&bp->b_lock);
|
|
__xfs_buf_ioacct_dec(bp);
|
|
spin_unlock(&bp->b_lock);
|
|
}
|
|
|
|
/*
|
|
* When we mark a buffer stale, we remove the buffer from the LRU and clear the
|
|
* b_lru_ref count so that the buffer is freed immediately when the buffer
|
|
* reference count falls to zero. If the buffer is already on the LRU, we need
|
|
* to remove the reference that LRU holds on the buffer.
|
|
*
|
|
* This prevents build-up of stale buffers on the LRU.
|
|
*/
|
|
void
|
|
xfs_buf_stale(
|
|
struct xfs_buf *bp)
|
|
{
|
|
ASSERT(xfs_buf_islocked(bp));
|
|
|
|
bp->b_flags |= XBF_STALE;
|
|
|
|
/*
|
|
* Clear the delwri status so that a delwri queue walker will not
|
|
* flush this buffer to disk now that it is stale. The delwri queue has
|
|
* a reference to the buffer, so this is safe to do.
|
|
*/
|
|
bp->b_flags &= ~_XBF_DELWRI_Q;
|
|
|
|
/*
|
|
* Once the buffer is marked stale and unlocked, a subsequent lookup
|
|
* could reset b_flags. There is no guarantee that the buffer is
|
|
* unaccounted (released to LRU) before that occurs. Drop in-flight
|
|
* status now to preserve accounting consistency.
|
|
*/
|
|
spin_lock(&bp->b_lock);
|
|
__xfs_buf_ioacct_dec(bp);
|
|
|
|
atomic_set(&bp->b_lru_ref, 0);
|
|
if (!(bp->b_state & XFS_BSTATE_DISPOSE) &&
|
|
(list_lru_del(&bp->b_target->bt_lru, &bp->b_lru)))
|
|
atomic_dec(&bp->b_hold);
|
|
|
|
ASSERT(atomic_read(&bp->b_hold) >= 1);
|
|
spin_unlock(&bp->b_lock);
|
|
}
|
|
|
|
static int
|
|
xfs_buf_get_maps(
|
|
struct xfs_buf *bp,
|
|
int map_count)
|
|
{
|
|
ASSERT(bp->b_maps == NULL);
|
|
bp->b_map_count = map_count;
|
|
|
|
if (map_count == 1) {
|
|
bp->b_maps = &bp->__b_map;
|
|
return 0;
|
|
}
|
|
|
|
bp->b_maps = kmem_zalloc(map_count * sizeof(struct xfs_buf_map),
|
|
KM_NOFS);
|
|
if (!bp->b_maps)
|
|
return -ENOMEM;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Frees b_pages if it was allocated.
|
|
*/
|
|
static void
|
|
xfs_buf_free_maps(
|
|
struct xfs_buf *bp)
|
|
{
|
|
if (bp->b_maps != &bp->__b_map) {
|
|
kmem_free(bp->b_maps);
|
|
bp->b_maps = NULL;
|
|
}
|
|
}
|
|
|
|
static int
|
|
_xfs_buf_alloc(
|
|
struct xfs_buftarg *target,
|
|
struct xfs_buf_map *map,
|
|
int nmaps,
|
|
xfs_buf_flags_t flags,
|
|
struct xfs_buf **bpp)
|
|
{
|
|
struct xfs_buf *bp;
|
|
int error;
|
|
int i;
|
|
|
|
*bpp = NULL;
|
|
bp = kmem_cache_zalloc(xfs_buf_cache, GFP_NOFS | __GFP_NOFAIL);
|
|
|
|
/*
|
|
* We don't want certain flags to appear in b_flags unless they are
|
|
* specifically set by later operations on the buffer.
|
|
*/
|
|
flags &= ~(XBF_UNMAPPED | XBF_TRYLOCK | XBF_ASYNC | XBF_READ_AHEAD);
|
|
|
|
atomic_set(&bp->b_hold, 1);
|
|
atomic_set(&bp->b_lru_ref, 1);
|
|
init_completion(&bp->b_iowait);
|
|
INIT_LIST_HEAD(&bp->b_lru);
|
|
INIT_LIST_HEAD(&bp->b_list);
|
|
INIT_LIST_HEAD(&bp->b_li_list);
|
|
sema_init(&bp->b_sema, 0); /* held, no waiters */
|
|
spin_lock_init(&bp->b_lock);
|
|
bp->b_target = target;
|
|
bp->b_mount = target->bt_mount;
|
|
bp->b_flags = flags;
|
|
|
|
/*
|
|
* Set length and io_length to the same value initially.
|
|
* I/O routines should use io_length, which will be the same in
|
|
* most cases but may be reset (e.g. XFS recovery).
|
|
*/
|
|
error = xfs_buf_get_maps(bp, nmaps);
|
|
if (error) {
|
|
kmem_cache_free(xfs_buf_cache, bp);
|
|
return error;
|
|
}
|
|
|
|
bp->b_rhash_key = map[0].bm_bn;
|
|
bp->b_length = 0;
|
|
for (i = 0; i < nmaps; i++) {
|
|
bp->b_maps[i].bm_bn = map[i].bm_bn;
|
|
bp->b_maps[i].bm_len = map[i].bm_len;
|
|
bp->b_length += map[i].bm_len;
|
|
}
|
|
|
|
atomic_set(&bp->b_pin_count, 0);
|
|
init_waitqueue_head(&bp->b_waiters);
|
|
|
|
XFS_STATS_INC(bp->b_mount, xb_create);
|
|
trace_xfs_buf_init(bp, _RET_IP_);
|
|
|
|
*bpp = bp;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
xfs_buf_free_pages(
|
|
struct xfs_buf *bp)
|
|
{
|
|
uint i;
|
|
|
|
ASSERT(bp->b_flags & _XBF_PAGES);
|
|
|
|
if (xfs_buf_is_vmapped(bp))
|
|
vm_unmap_ram(bp->b_addr, bp->b_page_count);
|
|
|
|
for (i = 0; i < bp->b_page_count; i++) {
|
|
if (bp->b_pages[i])
|
|
__free_page(bp->b_pages[i]);
|
|
}
|
|
if (current->reclaim_state)
|
|
current->reclaim_state->reclaimed_slab += bp->b_page_count;
|
|
|
|
if (bp->b_pages != bp->b_page_array)
|
|
kmem_free(bp->b_pages);
|
|
bp->b_pages = NULL;
|
|
bp->b_flags &= ~_XBF_PAGES;
|
|
}
|
|
|
|
static void
|
|
xfs_buf_free_callback(
|
|
struct callback_head *cb)
|
|
{
|
|
struct xfs_buf *bp = container_of(cb, struct xfs_buf, b_rcu);
|
|
|
|
xfs_buf_free_maps(bp);
|
|
kmem_cache_free(xfs_buf_cache, bp);
|
|
}
|
|
|
|
static void
|
|
xfs_buf_free(
|
|
struct xfs_buf *bp)
|
|
{
|
|
trace_xfs_buf_free(bp, _RET_IP_);
|
|
|
|
ASSERT(list_empty(&bp->b_lru));
|
|
|
|
if (bp->b_flags & _XBF_PAGES)
|
|
xfs_buf_free_pages(bp);
|
|
else if (bp->b_flags & _XBF_KMEM)
|
|
kmem_free(bp->b_addr);
|
|
|
|
call_rcu(&bp->b_rcu, xfs_buf_free_callback);
|
|
}
|
|
|
|
static int
|
|
xfs_buf_alloc_kmem(
|
|
struct xfs_buf *bp,
|
|
xfs_buf_flags_t flags)
|
|
{
|
|
xfs_km_flags_t kmflag_mask = KM_NOFS;
|
|
size_t size = BBTOB(bp->b_length);
|
|
|
|
/* Assure zeroed buffer for non-read cases. */
|
|
if (!(flags & XBF_READ))
|
|
kmflag_mask |= KM_ZERO;
|
|
|
|
bp->b_addr = kmem_alloc(size, kmflag_mask);
|
|
if (!bp->b_addr)
|
|
return -ENOMEM;
|
|
|
|
if (((unsigned long)(bp->b_addr + size - 1) & PAGE_MASK) !=
|
|
((unsigned long)bp->b_addr & PAGE_MASK)) {
|
|
/* b_addr spans two pages - use alloc_page instead */
|
|
kmem_free(bp->b_addr);
|
|
bp->b_addr = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
bp->b_offset = offset_in_page(bp->b_addr);
|
|
bp->b_pages = bp->b_page_array;
|
|
bp->b_pages[0] = kmem_to_page(bp->b_addr);
|
|
bp->b_page_count = 1;
|
|
bp->b_flags |= _XBF_KMEM;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
xfs_buf_alloc_pages(
|
|
struct xfs_buf *bp,
|
|
xfs_buf_flags_t flags)
|
|
{
|
|
gfp_t gfp_mask = __GFP_NOWARN;
|
|
long filled = 0;
|
|
|
|
if (flags & XBF_READ_AHEAD)
|
|
gfp_mask |= __GFP_NORETRY;
|
|
else
|
|
gfp_mask |= GFP_NOFS;
|
|
|
|
/* Make sure that we have a page list */
|
|
bp->b_page_count = DIV_ROUND_UP(BBTOB(bp->b_length), PAGE_SIZE);
|
|
if (bp->b_page_count <= XB_PAGES) {
|
|
bp->b_pages = bp->b_page_array;
|
|
} else {
|
|
bp->b_pages = kzalloc(sizeof(struct page *) * bp->b_page_count,
|
|
gfp_mask);
|
|
if (!bp->b_pages)
|
|
return -ENOMEM;
|
|
}
|
|
bp->b_flags |= _XBF_PAGES;
|
|
|
|
/* Assure zeroed buffer for non-read cases. */
|
|
if (!(flags & XBF_READ))
|
|
gfp_mask |= __GFP_ZERO;
|
|
|
|
/*
|
|
* Bulk filling of pages can take multiple calls. Not filling the entire
|
|
* array is not an allocation failure, so don't back off if we get at
|
|
* least one extra page.
|
|
*/
|
|
for (;;) {
|
|
long last = filled;
|
|
|
|
filled = alloc_pages_bulk_array(gfp_mask, bp->b_page_count,
|
|
bp->b_pages);
|
|
if (filled == bp->b_page_count) {
|
|
XFS_STATS_INC(bp->b_mount, xb_page_found);
|
|
break;
|
|
}
|
|
|
|
if (filled != last)
|
|
continue;
|
|
|
|
if (flags & XBF_READ_AHEAD) {
|
|
xfs_buf_free_pages(bp);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
XFS_STATS_INC(bp->b_mount, xb_page_retries);
|
|
memalloc_retry_wait(gfp_mask);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Map buffer into kernel address-space if necessary.
|
|
*/
|
|
STATIC int
|
|
_xfs_buf_map_pages(
|
|
struct xfs_buf *bp,
|
|
xfs_buf_flags_t flags)
|
|
{
|
|
ASSERT(bp->b_flags & _XBF_PAGES);
|
|
if (bp->b_page_count == 1) {
|
|
/* A single page buffer is always mappable */
|
|
bp->b_addr = page_address(bp->b_pages[0]);
|
|
} else if (flags & XBF_UNMAPPED) {
|
|
bp->b_addr = NULL;
|
|
} else {
|
|
int retried = 0;
|
|
unsigned nofs_flag;
|
|
|
|
/*
|
|
* vm_map_ram() will allocate auxiliary structures (e.g.
|
|
* pagetables) with GFP_KERNEL, yet we are likely to be under
|
|
* GFP_NOFS context here. Hence we need to tell memory reclaim
|
|
* that we are in such a context via PF_MEMALLOC_NOFS to prevent
|
|
* memory reclaim re-entering the filesystem here and
|
|
* potentially deadlocking.
|
|
*/
|
|
nofs_flag = memalloc_nofs_save();
|
|
do {
|
|
bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
|
|
-1);
|
|
if (bp->b_addr)
|
|
break;
|
|
vm_unmap_aliases();
|
|
} while (retried++ <= 1);
|
|
memalloc_nofs_restore(nofs_flag);
|
|
|
|
if (!bp->b_addr)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Finding and Reading Buffers
|
|
*/
|
|
static int
|
|
_xfs_buf_obj_cmp(
|
|
struct rhashtable_compare_arg *arg,
|
|
const void *obj)
|
|
{
|
|
const struct xfs_buf_map *map = arg->key;
|
|
const struct xfs_buf *bp = obj;
|
|
|
|
/*
|
|
* The key hashing in the lookup path depends on the key being the
|
|
* first element of the compare_arg, make sure to assert this.
|
|
*/
|
|
BUILD_BUG_ON(offsetof(struct xfs_buf_map, bm_bn) != 0);
|
|
|
|
if (bp->b_rhash_key != map->bm_bn)
|
|
return 1;
|
|
|
|
if (unlikely(bp->b_length != map->bm_len)) {
|
|
/*
|
|
* found a block number match. If the range doesn't
|
|
* match, the only way this is allowed is if the buffer
|
|
* in the cache is stale and the transaction that made
|
|
* it stale has not yet committed. i.e. we are
|
|
* reallocating a busy extent. Skip this buffer and
|
|
* continue searching for an exact match.
|
|
*/
|
|
ASSERT(bp->b_flags & XBF_STALE);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct rhashtable_params xfs_buf_hash_params = {
|
|
.min_size = 32, /* empty AGs have minimal footprint */
|
|
.nelem_hint = 16,
|
|
.key_len = sizeof(xfs_daddr_t),
|
|
.key_offset = offsetof(struct xfs_buf, b_rhash_key),
|
|
.head_offset = offsetof(struct xfs_buf, b_rhash_head),
|
|
.automatic_shrinking = true,
|
|
.obj_cmpfn = _xfs_buf_obj_cmp,
|
|
};
|
|
|
|
int
|
|
xfs_buf_hash_init(
|
|
struct xfs_perag *pag)
|
|
{
|
|
spin_lock_init(&pag->pag_buf_lock);
|
|
return rhashtable_init(&pag->pag_buf_hash, &xfs_buf_hash_params);
|
|
}
|
|
|
|
void
|
|
xfs_buf_hash_destroy(
|
|
struct xfs_perag *pag)
|
|
{
|
|
rhashtable_destroy(&pag->pag_buf_hash);
|
|
}
|
|
|
|
static int
|
|
xfs_buf_map_verify(
|
|
struct xfs_buftarg *btp,
|
|
struct xfs_buf_map *map)
|
|
{
|
|
xfs_daddr_t eofs;
|
|
|
|
/* Check for IOs smaller than the sector size / not sector aligned */
|
|
ASSERT(!(BBTOB(map->bm_len) < btp->bt_meta_sectorsize));
|
|
ASSERT(!(BBTOB(map->bm_bn) & (xfs_off_t)btp->bt_meta_sectormask));
|
|
|
|
/*
|
|
* Corrupted block numbers can get through to here, unfortunately, so we
|
|
* have to check that the buffer falls within the filesystem bounds.
|
|
*/
|
|
eofs = XFS_FSB_TO_BB(btp->bt_mount, btp->bt_mount->m_sb.sb_dblocks);
|
|
if (map->bm_bn < 0 || map->bm_bn >= eofs) {
|
|
xfs_alert(btp->bt_mount,
|
|
"%s: daddr 0x%llx out of range, EOFS 0x%llx",
|
|
__func__, map->bm_bn, eofs);
|
|
WARN_ON(1);
|
|
return -EFSCORRUPTED;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
xfs_buf_find_lock(
|
|
struct xfs_buf *bp,
|
|
xfs_buf_flags_t flags)
|
|
{
|
|
if (flags & XBF_TRYLOCK) {
|
|
if (!xfs_buf_trylock(bp)) {
|
|
XFS_STATS_INC(bp->b_mount, xb_busy_locked);
|
|
return -EAGAIN;
|
|
}
|
|
} else {
|
|
xfs_buf_lock(bp);
|
|
XFS_STATS_INC(bp->b_mount, xb_get_locked_waited);
|
|
}
|
|
|
|
/*
|
|
* if the buffer is stale, clear all the external state associated with
|
|
* it. We need to keep flags such as how we allocated the buffer memory
|
|
* intact here.
|
|
*/
|
|
if (bp->b_flags & XBF_STALE) {
|
|
ASSERT((bp->b_flags & _XBF_DELWRI_Q) == 0);
|
|
bp->b_flags &= _XBF_KMEM | _XBF_PAGES;
|
|
bp->b_ops = NULL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline int
|
|
xfs_buf_lookup(
|
|
struct xfs_perag *pag,
|
|
struct xfs_buf_map *map,
|
|
xfs_buf_flags_t flags,
|
|
struct xfs_buf **bpp)
|
|
{
|
|
struct xfs_buf *bp;
|
|
int error;
|
|
|
|
rcu_read_lock();
|
|
bp = rhashtable_lookup(&pag->pag_buf_hash, map, xfs_buf_hash_params);
|
|
if (!bp || !atomic_inc_not_zero(&bp->b_hold)) {
|
|
rcu_read_unlock();
|
|
return -ENOENT;
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
error = xfs_buf_find_lock(bp, flags);
|
|
if (error) {
|
|
xfs_buf_rele(bp);
|
|
return error;
|
|
}
|
|
|
|
trace_xfs_buf_find(bp, flags, _RET_IP_);
|
|
*bpp = bp;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Insert the new_bp into the hash table. This consumes the perag reference
|
|
* taken for the lookup regardless of the result of the insert.
|
|
*/
|
|
static int
|
|
xfs_buf_find_insert(
|
|
struct xfs_buftarg *btp,
|
|
struct xfs_perag *pag,
|
|
struct xfs_buf_map *cmap,
|
|
struct xfs_buf_map *map,
|
|
int nmaps,
|
|
xfs_buf_flags_t flags,
|
|
struct xfs_buf **bpp)
|
|
{
|
|
struct xfs_buf *new_bp;
|
|
struct xfs_buf *bp;
|
|
int error;
|
|
|
|
error = _xfs_buf_alloc(btp, map, nmaps, flags, &new_bp);
|
|
if (error)
|
|
goto out_drop_pag;
|
|
|
|
/*
|
|
* For buffers that fit entirely within a single page, first attempt to
|
|
* allocate the memory from the heap to minimise memory usage. If we
|
|
* can't get heap memory for these small buffers, we fall back to using
|
|
* the page allocator.
|
|
*/
|
|
if (BBTOB(new_bp->b_length) >= PAGE_SIZE ||
|
|
xfs_buf_alloc_kmem(new_bp, flags) < 0) {
|
|
error = xfs_buf_alloc_pages(new_bp, flags);
|
|
if (error)
|
|
goto out_free_buf;
|
|
}
|
|
|
|
spin_lock(&pag->pag_buf_lock);
|
|
bp = rhashtable_lookup_get_insert_fast(&pag->pag_buf_hash,
|
|
&new_bp->b_rhash_head, xfs_buf_hash_params);
|
|
if (IS_ERR(bp)) {
|
|
error = PTR_ERR(bp);
|
|
spin_unlock(&pag->pag_buf_lock);
|
|
goto out_free_buf;
|
|
}
|
|
if (bp) {
|
|
/* found an existing buffer */
|
|
atomic_inc(&bp->b_hold);
|
|
spin_unlock(&pag->pag_buf_lock);
|
|
error = xfs_buf_find_lock(bp, flags);
|
|
if (error)
|
|
xfs_buf_rele(bp);
|
|
else
|
|
*bpp = bp;
|
|
goto out_free_buf;
|
|
}
|
|
|
|
/* The new buffer keeps the perag reference until it is freed. */
|
|
new_bp->b_pag = pag;
|
|
spin_unlock(&pag->pag_buf_lock);
|
|
*bpp = new_bp;
|
|
return 0;
|
|
|
|
out_free_buf:
|
|
xfs_buf_free(new_bp);
|
|
out_drop_pag:
|
|
xfs_perag_put(pag);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Assembles a buffer covering the specified range. The code is optimised for
|
|
* cache hits, as metadata intensive workloads will see 3 orders of magnitude
|
|
* more hits than misses.
|
|
*/
|
|
int
|
|
xfs_buf_get_map(
|
|
struct xfs_buftarg *btp,
|
|
struct xfs_buf_map *map,
|
|
int nmaps,
|
|
xfs_buf_flags_t flags,
|
|
struct xfs_buf **bpp)
|
|
{
|
|
struct xfs_perag *pag;
|
|
struct xfs_buf *bp = NULL;
|
|
struct xfs_buf_map cmap = { .bm_bn = map[0].bm_bn };
|
|
int error;
|
|
int i;
|
|
|
|
for (i = 0; i < nmaps; i++)
|
|
cmap.bm_len += map[i].bm_len;
|
|
|
|
error = xfs_buf_map_verify(btp, &cmap);
|
|
if (error)
|
|
return error;
|
|
|
|
pag = xfs_perag_get(btp->bt_mount,
|
|
xfs_daddr_to_agno(btp->bt_mount, cmap.bm_bn));
|
|
|
|
error = xfs_buf_lookup(pag, &cmap, flags, &bp);
|
|
if (error && error != -ENOENT)
|
|
goto out_put_perag;
|
|
|
|
/* cache hits always outnumber misses by at least 10:1 */
|
|
if (unlikely(!bp)) {
|
|
XFS_STATS_INC(btp->bt_mount, xb_miss_locked);
|
|
|
|
if (flags & XBF_INCORE)
|
|
goto out_put_perag;
|
|
|
|
/* xfs_buf_find_insert() consumes the perag reference. */
|
|
error = xfs_buf_find_insert(btp, pag, &cmap, map, nmaps,
|
|
flags, &bp);
|
|
if (error)
|
|
return error;
|
|
} else {
|
|
XFS_STATS_INC(btp->bt_mount, xb_get_locked);
|
|
xfs_perag_put(pag);
|
|
}
|
|
|
|
/* We do not hold a perag reference anymore. */
|
|
if (!bp->b_addr) {
|
|
error = _xfs_buf_map_pages(bp, flags);
|
|
if (unlikely(error)) {
|
|
xfs_warn_ratelimited(btp->bt_mount,
|
|
"%s: failed to map %u pages", __func__,
|
|
bp->b_page_count);
|
|
xfs_buf_relse(bp);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Clear b_error if this is a lookup from a caller that doesn't expect
|
|
* valid data to be found in the buffer.
|
|
*/
|
|
if (!(flags & XBF_READ))
|
|
xfs_buf_ioerror(bp, 0);
|
|
|
|
XFS_STATS_INC(btp->bt_mount, xb_get);
|
|
trace_xfs_buf_get(bp, flags, _RET_IP_);
|
|
*bpp = bp;
|
|
return 0;
|
|
|
|
out_put_perag:
|
|
xfs_perag_put(pag);
|
|
return error;
|
|
}
|
|
|
|
int
|
|
_xfs_buf_read(
|
|
struct xfs_buf *bp,
|
|
xfs_buf_flags_t flags)
|
|
{
|
|
ASSERT(!(flags & XBF_WRITE));
|
|
ASSERT(bp->b_maps[0].bm_bn != XFS_BUF_DADDR_NULL);
|
|
|
|
bp->b_flags &= ~(XBF_WRITE | XBF_ASYNC | XBF_READ_AHEAD | XBF_DONE);
|
|
bp->b_flags |= flags & (XBF_READ | XBF_ASYNC | XBF_READ_AHEAD);
|
|
|
|
return xfs_buf_submit(bp);
|
|
}
|
|
|
|
/*
|
|
* Reverify a buffer found in cache without an attached ->b_ops.
|
|
*
|
|
* If the caller passed an ops structure and the buffer doesn't have ops
|
|
* assigned, set the ops and use it to verify the contents. If verification
|
|
* fails, clear XBF_DONE. We assume the buffer has no recorded errors and is
|
|
* already in XBF_DONE state on entry.
|
|
*
|
|
* Under normal operations, every in-core buffer is verified on read I/O
|
|
* completion. There are two scenarios that can lead to in-core buffers without
|
|
* an assigned ->b_ops. The first is during log recovery of buffers on a V4
|
|
* filesystem, though these buffers are purged at the end of recovery. The
|
|
* other is online repair, which intentionally reads with a NULL buffer ops to
|
|
* run several verifiers across an in-core buffer in order to establish buffer
|
|
* type. If repair can't establish that, the buffer will be left in memory
|
|
* with NULL buffer ops.
|
|
*/
|
|
int
|
|
xfs_buf_reverify(
|
|
struct xfs_buf *bp,
|
|
const struct xfs_buf_ops *ops)
|
|
{
|
|
ASSERT(bp->b_flags & XBF_DONE);
|
|
ASSERT(bp->b_error == 0);
|
|
|
|
if (!ops || bp->b_ops)
|
|
return 0;
|
|
|
|
bp->b_ops = ops;
|
|
bp->b_ops->verify_read(bp);
|
|
if (bp->b_error)
|
|
bp->b_flags &= ~XBF_DONE;
|
|
return bp->b_error;
|
|
}
|
|
|
|
int
|
|
xfs_buf_read_map(
|
|
struct xfs_buftarg *target,
|
|
struct xfs_buf_map *map,
|
|
int nmaps,
|
|
xfs_buf_flags_t flags,
|
|
struct xfs_buf **bpp,
|
|
const struct xfs_buf_ops *ops,
|
|
xfs_failaddr_t fa)
|
|
{
|
|
struct xfs_buf *bp;
|
|
int error;
|
|
|
|
flags |= XBF_READ;
|
|
*bpp = NULL;
|
|
|
|
error = xfs_buf_get_map(target, map, nmaps, flags, &bp);
|
|
if (error)
|
|
return error;
|
|
|
|
trace_xfs_buf_read(bp, flags, _RET_IP_);
|
|
|
|
if (!(bp->b_flags & XBF_DONE)) {
|
|
/* Initiate the buffer read and wait. */
|
|
XFS_STATS_INC(target->bt_mount, xb_get_read);
|
|
bp->b_ops = ops;
|
|
error = _xfs_buf_read(bp, flags);
|
|
|
|
/* Readahead iodone already dropped the buffer, so exit. */
|
|
if (flags & XBF_ASYNC)
|
|
return 0;
|
|
} else {
|
|
/* Buffer already read; all we need to do is check it. */
|
|
error = xfs_buf_reverify(bp, ops);
|
|
|
|
/* Readahead already finished; drop the buffer and exit. */
|
|
if (flags & XBF_ASYNC) {
|
|
xfs_buf_relse(bp);
|
|
return 0;
|
|
}
|
|
|
|
/* We do not want read in the flags */
|
|
bp->b_flags &= ~XBF_READ;
|
|
ASSERT(bp->b_ops != NULL || ops == NULL);
|
|
}
|
|
|
|
/*
|
|
* If we've had a read error, then the contents of the buffer are
|
|
* invalid and should not be used. To ensure that a followup read tries
|
|
* to pull the buffer from disk again, we clear the XBF_DONE flag and
|
|
* mark the buffer stale. This ensures that anyone who has a current
|
|
* reference to the buffer will interpret it's contents correctly and
|
|
* future cache lookups will also treat it as an empty, uninitialised
|
|
* buffer.
|
|
*/
|
|
if (error) {
|
|
/*
|
|
* Check against log shutdown for error reporting because
|
|
* metadata writeback may require a read first and we need to
|
|
* report errors in metadata writeback until the log is shut
|
|
* down. High level transaction read functions already check
|
|
* against mount shutdown, anyway, so we only need to be
|
|
* concerned about low level IO interactions here.
|
|
*/
|
|
if (!xlog_is_shutdown(target->bt_mount->m_log))
|
|
xfs_buf_ioerror_alert(bp, fa);
|
|
|
|
bp->b_flags &= ~XBF_DONE;
|
|
xfs_buf_stale(bp);
|
|
xfs_buf_relse(bp);
|
|
|
|
/* bad CRC means corrupted metadata */
|
|
if (error == -EFSBADCRC)
|
|
error = -EFSCORRUPTED;
|
|
return error;
|
|
}
|
|
|
|
*bpp = bp;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If we are not low on memory then do the readahead in a deadlock
|
|
* safe manner.
|
|
*/
|
|
void
|
|
xfs_buf_readahead_map(
|
|
struct xfs_buftarg *target,
|
|
struct xfs_buf_map *map,
|
|
int nmaps,
|
|
const struct xfs_buf_ops *ops)
|
|
{
|
|
struct xfs_buf *bp;
|
|
|
|
xfs_buf_read_map(target, map, nmaps,
|
|
XBF_TRYLOCK | XBF_ASYNC | XBF_READ_AHEAD, &bp, ops,
|
|
__this_address);
|
|
}
|
|
|
|
/*
|
|
* Read an uncached buffer from disk. Allocates and returns a locked
|
|
* buffer containing the disk contents or nothing. Uncached buffers always have
|
|
* a cache index of XFS_BUF_DADDR_NULL so we can easily determine if the buffer
|
|
* is cached or uncached during fault diagnosis.
|
|
*/
|
|
int
|
|
xfs_buf_read_uncached(
|
|
struct xfs_buftarg *target,
|
|
xfs_daddr_t daddr,
|
|
size_t numblks,
|
|
xfs_buf_flags_t flags,
|
|
struct xfs_buf **bpp,
|
|
const struct xfs_buf_ops *ops)
|
|
{
|
|
struct xfs_buf *bp;
|
|
int error;
|
|
|
|
*bpp = NULL;
|
|
|
|
error = xfs_buf_get_uncached(target, numblks, flags, &bp);
|
|
if (error)
|
|
return error;
|
|
|
|
/* set up the buffer for a read IO */
|
|
ASSERT(bp->b_map_count == 1);
|
|
bp->b_rhash_key = XFS_BUF_DADDR_NULL;
|
|
bp->b_maps[0].bm_bn = daddr;
|
|
bp->b_flags |= XBF_READ;
|
|
bp->b_ops = ops;
|
|
|
|
xfs_buf_submit(bp);
|
|
if (bp->b_error) {
|
|
error = bp->b_error;
|
|
xfs_buf_relse(bp);
|
|
return error;
|
|
}
|
|
|
|
*bpp = bp;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
xfs_buf_get_uncached(
|
|
struct xfs_buftarg *target,
|
|
size_t numblks,
|
|
xfs_buf_flags_t flags,
|
|
struct xfs_buf **bpp)
|
|
{
|
|
int error;
|
|
struct xfs_buf *bp;
|
|
DEFINE_SINGLE_BUF_MAP(map, XFS_BUF_DADDR_NULL, numblks);
|
|
|
|
*bpp = NULL;
|
|
|
|
/* flags might contain irrelevant bits, pass only what we care about */
|
|
error = _xfs_buf_alloc(target, &map, 1, flags & XBF_NO_IOACCT, &bp);
|
|
if (error)
|
|
return error;
|
|
|
|
error = xfs_buf_alloc_pages(bp, flags);
|
|
if (error)
|
|
goto fail_free_buf;
|
|
|
|
error = _xfs_buf_map_pages(bp, 0);
|
|
if (unlikely(error)) {
|
|
xfs_warn(target->bt_mount,
|
|
"%s: failed to map pages", __func__);
|
|
goto fail_free_buf;
|
|
}
|
|
|
|
trace_xfs_buf_get_uncached(bp, _RET_IP_);
|
|
*bpp = bp;
|
|
return 0;
|
|
|
|
fail_free_buf:
|
|
xfs_buf_free(bp);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Increment reference count on buffer, to hold the buffer concurrently
|
|
* with another thread which may release (free) the buffer asynchronously.
|
|
* Must hold the buffer already to call this function.
|
|
*/
|
|
void
|
|
xfs_buf_hold(
|
|
struct xfs_buf *bp)
|
|
{
|
|
trace_xfs_buf_hold(bp, _RET_IP_);
|
|
atomic_inc(&bp->b_hold);
|
|
}
|
|
|
|
/*
|
|
* Release a hold on the specified buffer. If the hold count is 1, the buffer is
|
|
* placed on LRU or freed (depending on b_lru_ref).
|
|
*/
|
|
void
|
|
xfs_buf_rele(
|
|
struct xfs_buf *bp)
|
|
{
|
|
struct xfs_perag *pag = bp->b_pag;
|
|
bool release;
|
|
bool freebuf = false;
|
|
|
|
trace_xfs_buf_rele(bp, _RET_IP_);
|
|
|
|
if (!pag) {
|
|
ASSERT(list_empty(&bp->b_lru));
|
|
if (atomic_dec_and_test(&bp->b_hold)) {
|
|
xfs_buf_ioacct_dec(bp);
|
|
xfs_buf_free(bp);
|
|
}
|
|
return;
|
|
}
|
|
|
|
ASSERT(atomic_read(&bp->b_hold) > 0);
|
|
|
|
/*
|
|
* We grab the b_lock here first to serialise racing xfs_buf_rele()
|
|
* calls. The pag_buf_lock being taken on the last reference only
|
|
* serialises against racing lookups in xfs_buf_find(). IOWs, the second
|
|
* to last reference we drop here is not serialised against the last
|
|
* reference until we take bp->b_lock. Hence if we don't grab b_lock
|
|
* first, the last "release" reference can win the race to the lock and
|
|
* free the buffer before the second-to-last reference is processed,
|
|
* leading to a use-after-free scenario.
|
|
*/
|
|
spin_lock(&bp->b_lock);
|
|
release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
|
|
if (!release) {
|
|
/*
|
|
* Drop the in-flight state if the buffer is already on the LRU
|
|
* and it holds the only reference. This is racy because we
|
|
* haven't acquired the pag lock, but the use of _XBF_IN_FLIGHT
|
|
* ensures the decrement occurs only once per-buf.
|
|
*/
|
|
if ((atomic_read(&bp->b_hold) == 1) && !list_empty(&bp->b_lru))
|
|
__xfs_buf_ioacct_dec(bp);
|
|
goto out_unlock;
|
|
}
|
|
|
|
/* the last reference has been dropped ... */
|
|
__xfs_buf_ioacct_dec(bp);
|
|
if (!(bp->b_flags & XBF_STALE) && atomic_read(&bp->b_lru_ref)) {
|
|
/*
|
|
* If the buffer is added to the LRU take a new reference to the
|
|
* buffer for the LRU and clear the (now stale) dispose list
|
|
* state flag
|
|
*/
|
|
if (list_lru_add(&bp->b_target->bt_lru, &bp->b_lru)) {
|
|
bp->b_state &= ~XFS_BSTATE_DISPOSE;
|
|
atomic_inc(&bp->b_hold);
|
|
}
|
|
spin_unlock(&pag->pag_buf_lock);
|
|
} else {
|
|
/*
|
|
* most of the time buffers will already be removed from the
|
|
* LRU, so optimise that case by checking for the
|
|
* XFS_BSTATE_DISPOSE flag indicating the last list the buffer
|
|
* was on was the disposal list
|
|
*/
|
|
if (!(bp->b_state & XFS_BSTATE_DISPOSE)) {
|
|
list_lru_del(&bp->b_target->bt_lru, &bp->b_lru);
|
|
} else {
|
|
ASSERT(list_empty(&bp->b_lru));
|
|
}
|
|
|
|
ASSERT(!(bp->b_flags & _XBF_DELWRI_Q));
|
|
rhashtable_remove_fast(&pag->pag_buf_hash, &bp->b_rhash_head,
|
|
xfs_buf_hash_params);
|
|
spin_unlock(&pag->pag_buf_lock);
|
|
xfs_perag_put(pag);
|
|
freebuf = true;
|
|
}
|
|
|
|
out_unlock:
|
|
spin_unlock(&bp->b_lock);
|
|
|
|
if (freebuf)
|
|
xfs_buf_free(bp);
|
|
}
|
|
|
|
|
|
/*
|
|
* Lock a buffer object, if it is not already locked.
|
|
*
|
|
* If we come across a stale, pinned, locked buffer, we know that we are
|
|
* being asked to lock a buffer that has been reallocated. Because it is
|
|
* pinned, we know that the log has not been pushed to disk and hence it
|
|
* will still be locked. Rather than continuing to have trylock attempts
|
|
* fail until someone else pushes the log, push it ourselves before
|
|
* returning. This means that the xfsaild will not get stuck trying
|
|
* to push on stale inode buffers.
|
|
*/
|
|
int
|
|
xfs_buf_trylock(
|
|
struct xfs_buf *bp)
|
|
{
|
|
int locked;
|
|
|
|
locked = down_trylock(&bp->b_sema) == 0;
|
|
if (locked)
|
|
trace_xfs_buf_trylock(bp, _RET_IP_);
|
|
else
|
|
trace_xfs_buf_trylock_fail(bp, _RET_IP_);
|
|
return locked;
|
|
}
|
|
|
|
/*
|
|
* Lock a buffer object.
|
|
*
|
|
* If we come across a stale, pinned, locked buffer, we know that we
|
|
* are being asked to lock a buffer that has been reallocated. Because
|
|
* it is pinned, we know that the log has not been pushed to disk and
|
|
* hence it will still be locked. Rather than sleeping until someone
|
|
* else pushes the log, push it ourselves before trying to get the lock.
|
|
*/
|
|
void
|
|
xfs_buf_lock(
|
|
struct xfs_buf *bp)
|
|
{
|
|
trace_xfs_buf_lock(bp, _RET_IP_);
|
|
|
|
if (atomic_read(&bp->b_pin_count) && (bp->b_flags & XBF_STALE))
|
|
xfs_log_force(bp->b_mount, 0);
|
|
down(&bp->b_sema);
|
|
|
|
trace_xfs_buf_lock_done(bp, _RET_IP_);
|
|
}
|
|
|
|
void
|
|
xfs_buf_unlock(
|
|
struct xfs_buf *bp)
|
|
{
|
|
ASSERT(xfs_buf_islocked(bp));
|
|
|
|
up(&bp->b_sema);
|
|
trace_xfs_buf_unlock(bp, _RET_IP_);
|
|
}
|
|
|
|
STATIC void
|
|
xfs_buf_wait_unpin(
|
|
struct xfs_buf *bp)
|
|
{
|
|
DECLARE_WAITQUEUE (wait, current);
|
|
|
|
if (atomic_read(&bp->b_pin_count) == 0)
|
|
return;
|
|
|
|
add_wait_queue(&bp->b_waiters, &wait);
|
|
for (;;) {
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
if (atomic_read(&bp->b_pin_count) == 0)
|
|
break;
|
|
io_schedule();
|
|
}
|
|
remove_wait_queue(&bp->b_waiters, &wait);
|
|
set_current_state(TASK_RUNNING);
|
|
}
|
|
|
|
static void
|
|
xfs_buf_ioerror_alert_ratelimited(
|
|
struct xfs_buf *bp)
|
|
{
|
|
static unsigned long lasttime;
|
|
static struct xfs_buftarg *lasttarg;
|
|
|
|
if (bp->b_target != lasttarg ||
|
|
time_after(jiffies, (lasttime + 5*HZ))) {
|
|
lasttime = jiffies;
|
|
xfs_buf_ioerror_alert(bp, __this_address);
|
|
}
|
|
lasttarg = bp->b_target;
|
|
}
|
|
|
|
/*
|
|
* Account for this latest trip around the retry handler, and decide if
|
|
* we've failed enough times to constitute a permanent failure.
|
|
*/
|
|
static bool
|
|
xfs_buf_ioerror_permanent(
|
|
struct xfs_buf *bp,
|
|
struct xfs_error_cfg *cfg)
|
|
{
|
|
struct xfs_mount *mp = bp->b_mount;
|
|
|
|
if (cfg->max_retries != XFS_ERR_RETRY_FOREVER &&
|
|
++bp->b_retries > cfg->max_retries)
|
|
return true;
|
|
if (cfg->retry_timeout != XFS_ERR_RETRY_FOREVER &&
|
|
time_after(jiffies, cfg->retry_timeout + bp->b_first_retry_time))
|
|
return true;
|
|
|
|
/* At unmount we may treat errors differently */
|
|
if (xfs_is_unmounting(mp) && mp->m_fail_unmount)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* On a sync write or shutdown we just want to stale the buffer and let the
|
|
* caller handle the error in bp->b_error appropriately.
|
|
*
|
|
* If the write was asynchronous then no one will be looking for the error. If
|
|
* this is the first failure of this type, clear the error state and write the
|
|
* buffer out again. This means we always retry an async write failure at least
|
|
* once, but we also need to set the buffer up to behave correctly now for
|
|
* repeated failures.
|
|
*
|
|
* If we get repeated async write failures, then we take action according to the
|
|
* error configuration we have been set up to use.
|
|
*
|
|
* Returns true if this function took care of error handling and the caller must
|
|
* not touch the buffer again. Return false if the caller should proceed with
|
|
* normal I/O completion handling.
|
|
*/
|
|
static bool
|
|
xfs_buf_ioend_handle_error(
|
|
struct xfs_buf *bp)
|
|
{
|
|
struct xfs_mount *mp = bp->b_mount;
|
|
struct xfs_error_cfg *cfg;
|
|
|
|
/*
|
|
* If we've already shutdown the journal because of I/O errors, there's
|
|
* no point in giving this a retry.
|
|
*/
|
|
if (xlog_is_shutdown(mp->m_log))
|
|
goto out_stale;
|
|
|
|
xfs_buf_ioerror_alert_ratelimited(bp);
|
|
|
|
/*
|
|
* We're not going to bother about retrying this during recovery.
|
|
* One strike!
|
|
*/
|
|
if (bp->b_flags & _XBF_LOGRECOVERY) {
|
|
xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR);
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Synchronous writes will have callers process the error.
|
|
*/
|
|
if (!(bp->b_flags & XBF_ASYNC))
|
|
goto out_stale;
|
|
|
|
trace_xfs_buf_iodone_async(bp, _RET_IP_);
|
|
|
|
cfg = xfs_error_get_cfg(mp, XFS_ERR_METADATA, bp->b_error);
|
|
if (bp->b_last_error != bp->b_error ||
|
|
!(bp->b_flags & (XBF_STALE | XBF_WRITE_FAIL))) {
|
|
bp->b_last_error = bp->b_error;
|
|
if (cfg->retry_timeout != XFS_ERR_RETRY_FOREVER &&
|
|
!bp->b_first_retry_time)
|
|
bp->b_first_retry_time = jiffies;
|
|
goto resubmit;
|
|
}
|
|
|
|
/*
|
|
* Permanent error - we need to trigger a shutdown if we haven't already
|
|
* to indicate that inconsistency will result from this action.
|
|
*/
|
|
if (xfs_buf_ioerror_permanent(bp, cfg)) {
|
|
xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR);
|
|
goto out_stale;
|
|
}
|
|
|
|
/* Still considered a transient error. Caller will schedule retries. */
|
|
if (bp->b_flags & _XBF_INODES)
|
|
xfs_buf_inode_io_fail(bp);
|
|
else if (bp->b_flags & _XBF_DQUOTS)
|
|
xfs_buf_dquot_io_fail(bp);
|
|
else
|
|
ASSERT(list_empty(&bp->b_li_list));
|
|
xfs_buf_ioerror(bp, 0);
|
|
xfs_buf_relse(bp);
|
|
return true;
|
|
|
|
resubmit:
|
|
xfs_buf_ioerror(bp, 0);
|
|
bp->b_flags |= (XBF_DONE | XBF_WRITE_FAIL);
|
|
xfs_buf_submit(bp);
|
|
return true;
|
|
out_stale:
|
|
xfs_buf_stale(bp);
|
|
bp->b_flags |= XBF_DONE;
|
|
bp->b_flags &= ~XBF_WRITE;
|
|
trace_xfs_buf_error_relse(bp, _RET_IP_);
|
|
return false;
|
|
}
|
|
|
|
static void
|
|
xfs_buf_ioend(
|
|
struct xfs_buf *bp)
|
|
{
|
|
trace_xfs_buf_iodone(bp, _RET_IP_);
|
|
|
|
/*
|
|
* Pull in IO completion errors now. We are guaranteed to be running
|
|
* single threaded, so we don't need the lock to read b_io_error.
|
|
*/
|
|
if (!bp->b_error && bp->b_io_error)
|
|
xfs_buf_ioerror(bp, bp->b_io_error);
|
|
|
|
if (bp->b_flags & XBF_READ) {
|
|
if (!bp->b_error && bp->b_ops)
|
|
bp->b_ops->verify_read(bp);
|
|
if (!bp->b_error)
|
|
bp->b_flags |= XBF_DONE;
|
|
} else {
|
|
if (!bp->b_error) {
|
|
bp->b_flags &= ~XBF_WRITE_FAIL;
|
|
bp->b_flags |= XBF_DONE;
|
|
}
|
|
|
|
if (unlikely(bp->b_error) && xfs_buf_ioend_handle_error(bp))
|
|
return;
|
|
|
|
/* clear the retry state */
|
|
bp->b_last_error = 0;
|
|
bp->b_retries = 0;
|
|
bp->b_first_retry_time = 0;
|
|
|
|
/*
|
|
* Note that for things like remote attribute buffers, there may
|
|
* not be a buffer log item here, so processing the buffer log
|
|
* item must remain optional.
|
|
*/
|
|
if (bp->b_log_item)
|
|
xfs_buf_item_done(bp);
|
|
|
|
if (bp->b_flags & _XBF_INODES)
|
|
xfs_buf_inode_iodone(bp);
|
|
else if (bp->b_flags & _XBF_DQUOTS)
|
|
xfs_buf_dquot_iodone(bp);
|
|
|
|
}
|
|
|
|
bp->b_flags &= ~(XBF_READ | XBF_WRITE | XBF_READ_AHEAD |
|
|
_XBF_LOGRECOVERY);
|
|
|
|
if (bp->b_flags & XBF_ASYNC)
|
|
xfs_buf_relse(bp);
|
|
else
|
|
complete(&bp->b_iowait);
|
|
}
|
|
|
|
static void
|
|
xfs_buf_ioend_work(
|
|
struct work_struct *work)
|
|
{
|
|
struct xfs_buf *bp =
|
|
container_of(work, struct xfs_buf, b_ioend_work);
|
|
|
|
xfs_buf_ioend(bp);
|
|
}
|
|
|
|
static void
|
|
xfs_buf_ioend_async(
|
|
struct xfs_buf *bp)
|
|
{
|
|
INIT_WORK(&bp->b_ioend_work, xfs_buf_ioend_work);
|
|
queue_work(bp->b_mount->m_buf_workqueue, &bp->b_ioend_work);
|
|
}
|
|
|
|
void
|
|
__xfs_buf_ioerror(
|
|
struct xfs_buf *bp,
|
|
int error,
|
|
xfs_failaddr_t failaddr)
|
|
{
|
|
ASSERT(error <= 0 && error >= -1000);
|
|
bp->b_error = error;
|
|
trace_xfs_buf_ioerror(bp, error, failaddr);
|
|
}
|
|
|
|
void
|
|
xfs_buf_ioerror_alert(
|
|
struct xfs_buf *bp,
|
|
xfs_failaddr_t func)
|
|
{
|
|
xfs_buf_alert_ratelimited(bp, "XFS: metadata IO error",
|
|
"metadata I/O error in \"%pS\" at daddr 0x%llx len %d error %d",
|
|
func, (uint64_t)xfs_buf_daddr(bp),
|
|
bp->b_length, -bp->b_error);
|
|
}
|
|
|
|
/*
|
|
* To simulate an I/O failure, the buffer must be locked and held with at least
|
|
* three references. The LRU reference is dropped by the stale call. The buf
|
|
* item reference is dropped via ioend processing. The third reference is owned
|
|
* by the caller and is dropped on I/O completion if the buffer is XBF_ASYNC.
|
|
*/
|
|
void
|
|
xfs_buf_ioend_fail(
|
|
struct xfs_buf *bp)
|
|
{
|
|
bp->b_flags &= ~XBF_DONE;
|
|
xfs_buf_stale(bp);
|
|
xfs_buf_ioerror(bp, -EIO);
|
|
xfs_buf_ioend(bp);
|
|
}
|
|
|
|
int
|
|
xfs_bwrite(
|
|
struct xfs_buf *bp)
|
|
{
|
|
int error;
|
|
|
|
ASSERT(xfs_buf_islocked(bp));
|
|
|
|
bp->b_flags |= XBF_WRITE;
|
|
bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q |
|
|
XBF_DONE);
|
|
|
|
error = xfs_buf_submit(bp);
|
|
if (error)
|
|
xfs_force_shutdown(bp->b_mount, SHUTDOWN_META_IO_ERROR);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
xfs_buf_bio_end_io(
|
|
struct bio *bio)
|
|
{
|
|
struct xfs_buf *bp = (struct xfs_buf *)bio->bi_private;
|
|
|
|
if (!bio->bi_status &&
|
|
(bp->b_flags & XBF_WRITE) && (bp->b_flags & XBF_ASYNC) &&
|
|
XFS_TEST_ERROR(false, bp->b_mount, XFS_ERRTAG_BUF_IOERROR))
|
|
bio->bi_status = BLK_STS_IOERR;
|
|
|
|
/*
|
|
* don't overwrite existing errors - otherwise we can lose errors on
|
|
* buffers that require multiple bios to complete.
|
|
*/
|
|
if (bio->bi_status) {
|
|
int error = blk_status_to_errno(bio->bi_status);
|
|
|
|
cmpxchg(&bp->b_io_error, 0, error);
|
|
}
|
|
|
|
if (!bp->b_error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ))
|
|
invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp));
|
|
|
|
if (atomic_dec_and_test(&bp->b_io_remaining) == 1)
|
|
xfs_buf_ioend_async(bp);
|
|
bio_put(bio);
|
|
}
|
|
|
|
static void
|
|
xfs_buf_ioapply_map(
|
|
struct xfs_buf *bp,
|
|
int map,
|
|
int *buf_offset,
|
|
int *count,
|
|
blk_opf_t op)
|
|
{
|
|
int page_index;
|
|
unsigned int total_nr_pages = bp->b_page_count;
|
|
int nr_pages;
|
|
struct bio *bio;
|
|
sector_t sector = bp->b_maps[map].bm_bn;
|
|
int size;
|
|
int offset;
|
|
|
|
/* skip the pages in the buffer before the start offset */
|
|
page_index = 0;
|
|
offset = *buf_offset;
|
|
while (offset >= PAGE_SIZE) {
|
|
page_index++;
|
|
offset -= PAGE_SIZE;
|
|
}
|
|
|
|
/*
|
|
* Limit the IO size to the length of the current vector, and update the
|
|
* remaining IO count for the next time around.
|
|
*/
|
|
size = min_t(int, BBTOB(bp->b_maps[map].bm_len), *count);
|
|
*count -= size;
|
|
*buf_offset += size;
|
|
|
|
next_chunk:
|
|
atomic_inc(&bp->b_io_remaining);
|
|
nr_pages = bio_max_segs(total_nr_pages);
|
|
|
|
bio = bio_alloc(bp->b_target->bt_bdev, nr_pages, op, GFP_NOIO);
|
|
bio->bi_iter.bi_sector = sector;
|
|
bio->bi_end_io = xfs_buf_bio_end_io;
|
|
bio->bi_private = bp;
|
|
|
|
for (; size && nr_pages; nr_pages--, page_index++) {
|
|
int rbytes, nbytes = PAGE_SIZE - offset;
|
|
|
|
if (nbytes > size)
|
|
nbytes = size;
|
|
|
|
rbytes = bio_add_page(bio, bp->b_pages[page_index], nbytes,
|
|
offset);
|
|
if (rbytes < nbytes)
|
|
break;
|
|
|
|
offset = 0;
|
|
sector += BTOBB(nbytes);
|
|
size -= nbytes;
|
|
total_nr_pages--;
|
|
}
|
|
|
|
if (likely(bio->bi_iter.bi_size)) {
|
|
if (xfs_buf_is_vmapped(bp)) {
|
|
flush_kernel_vmap_range(bp->b_addr,
|
|
xfs_buf_vmap_len(bp));
|
|
}
|
|
submit_bio(bio);
|
|
if (size)
|
|
goto next_chunk;
|
|
} else {
|
|
/*
|
|
* This is guaranteed not to be the last io reference count
|
|
* because the caller (xfs_buf_submit) holds a count itself.
|
|
*/
|
|
atomic_dec(&bp->b_io_remaining);
|
|
xfs_buf_ioerror(bp, -EIO);
|
|
bio_put(bio);
|
|
}
|
|
|
|
}
|
|
|
|
STATIC void
|
|
_xfs_buf_ioapply(
|
|
struct xfs_buf *bp)
|
|
{
|
|
struct blk_plug plug;
|
|
blk_opf_t op;
|
|
int offset;
|
|
int size;
|
|
int i;
|
|
|
|
/*
|
|
* Make sure we capture only current IO errors rather than stale errors
|
|
* left over from previous use of the buffer (e.g. failed readahead).
|
|
*/
|
|
bp->b_error = 0;
|
|
|
|
if (bp->b_flags & XBF_WRITE) {
|
|
op = REQ_OP_WRITE;
|
|
|
|
/*
|
|
* Run the write verifier callback function if it exists. If
|
|
* this function fails it will mark the buffer with an error and
|
|
* the IO should not be dispatched.
|
|
*/
|
|
if (bp->b_ops) {
|
|
bp->b_ops->verify_write(bp);
|
|
if (bp->b_error) {
|
|
xfs_force_shutdown(bp->b_mount,
|
|
SHUTDOWN_CORRUPT_INCORE);
|
|
return;
|
|
}
|
|
} else if (bp->b_rhash_key != XFS_BUF_DADDR_NULL) {
|
|
struct xfs_mount *mp = bp->b_mount;
|
|
|
|
/*
|
|
* non-crc filesystems don't attach verifiers during
|
|
* log recovery, so don't warn for such filesystems.
|
|
*/
|
|
if (xfs_has_crc(mp)) {
|
|
xfs_warn(mp,
|
|
"%s: no buf ops on daddr 0x%llx len %d",
|
|
__func__, xfs_buf_daddr(bp),
|
|
bp->b_length);
|
|
xfs_hex_dump(bp->b_addr,
|
|
XFS_CORRUPTION_DUMP_LEN);
|
|
dump_stack();
|
|
}
|
|
}
|
|
} else {
|
|
op = REQ_OP_READ;
|
|
if (bp->b_flags & XBF_READ_AHEAD)
|
|
op |= REQ_RAHEAD;
|
|
}
|
|
|
|
/* we only use the buffer cache for meta-data */
|
|
op |= REQ_META;
|
|
|
|
/*
|
|
* Walk all the vectors issuing IO on them. Set up the initial offset
|
|
* into the buffer and the desired IO size before we start -
|
|
* _xfs_buf_ioapply_vec() will modify them appropriately for each
|
|
* subsequent call.
|
|
*/
|
|
offset = bp->b_offset;
|
|
size = BBTOB(bp->b_length);
|
|
blk_start_plug(&plug);
|
|
for (i = 0; i < bp->b_map_count; i++) {
|
|
xfs_buf_ioapply_map(bp, i, &offset, &size, op);
|
|
if (bp->b_error)
|
|
break;
|
|
if (size <= 0)
|
|
break; /* all done */
|
|
}
|
|
blk_finish_plug(&plug);
|
|
}
|
|
|
|
/*
|
|
* Wait for I/O completion of a sync buffer and return the I/O error code.
|
|
*/
|
|
static int
|
|
xfs_buf_iowait(
|
|
struct xfs_buf *bp)
|
|
{
|
|
ASSERT(!(bp->b_flags & XBF_ASYNC));
|
|
|
|
trace_xfs_buf_iowait(bp, _RET_IP_);
|
|
wait_for_completion(&bp->b_iowait);
|
|
trace_xfs_buf_iowait_done(bp, _RET_IP_);
|
|
|
|
return bp->b_error;
|
|
}
|
|
|
|
/*
|
|
* Buffer I/O submission path, read or write. Asynchronous submission transfers
|
|
* the buffer lock ownership and the current reference to the IO. It is not
|
|
* safe to reference the buffer after a call to this function unless the caller
|
|
* holds an additional reference itself.
|
|
*/
|
|
static int
|
|
__xfs_buf_submit(
|
|
struct xfs_buf *bp,
|
|
bool wait)
|
|
{
|
|
int error = 0;
|
|
|
|
trace_xfs_buf_submit(bp, _RET_IP_);
|
|
|
|
ASSERT(!(bp->b_flags & _XBF_DELWRI_Q));
|
|
|
|
/*
|
|
* On log shutdown we stale and complete the buffer immediately. We can
|
|
* be called to read the superblock before the log has been set up, so
|
|
* be careful checking the log state.
|
|
*
|
|
* Checking the mount shutdown state here can result in the log tail
|
|
* moving inappropriately on disk as the log may not yet be shut down.
|
|
* i.e. failing this buffer on mount shutdown can remove it from the AIL
|
|
* and move the tail of the log forwards without having written this
|
|
* buffer to disk. This corrupts the log tail state in memory, and
|
|
* because the log may not be shut down yet, it can then be propagated
|
|
* to disk before the log is shutdown. Hence we check log shutdown
|
|
* state here rather than mount state to avoid corrupting the log tail
|
|
* on shutdown.
|
|
*/
|
|
if (bp->b_mount->m_log &&
|
|
xlog_is_shutdown(bp->b_mount->m_log)) {
|
|
xfs_buf_ioend_fail(bp);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Grab a reference so the buffer does not go away underneath us. For
|
|
* async buffers, I/O completion drops the callers reference, which
|
|
* could occur before submission returns.
|
|
*/
|
|
xfs_buf_hold(bp);
|
|
|
|
if (bp->b_flags & XBF_WRITE)
|
|
xfs_buf_wait_unpin(bp);
|
|
|
|
/* clear the internal error state to avoid spurious errors */
|
|
bp->b_io_error = 0;
|
|
|
|
/*
|
|
* Set the count to 1 initially, this will stop an I/O completion
|
|
* callout which happens before we have started all the I/O from calling
|
|
* xfs_buf_ioend too early.
|
|
*/
|
|
atomic_set(&bp->b_io_remaining, 1);
|
|
if (bp->b_flags & XBF_ASYNC)
|
|
xfs_buf_ioacct_inc(bp);
|
|
_xfs_buf_ioapply(bp);
|
|
|
|
/*
|
|
* If _xfs_buf_ioapply failed, we can get back here with only the IO
|
|
* reference we took above. If we drop it to zero, run completion so
|
|
* that we don't return to the caller with completion still pending.
|
|
*/
|
|
if (atomic_dec_and_test(&bp->b_io_remaining) == 1) {
|
|
if (bp->b_error || !(bp->b_flags & XBF_ASYNC))
|
|
xfs_buf_ioend(bp);
|
|
else
|
|
xfs_buf_ioend_async(bp);
|
|
}
|
|
|
|
if (wait)
|
|
error = xfs_buf_iowait(bp);
|
|
|
|
/*
|
|
* Release the hold that keeps the buffer referenced for the entire
|
|
* I/O. Note that if the buffer is async, it is not safe to reference
|
|
* after this release.
|
|
*/
|
|
xfs_buf_rele(bp);
|
|
return error;
|
|
}
|
|
|
|
void *
|
|
xfs_buf_offset(
|
|
struct xfs_buf *bp,
|
|
size_t offset)
|
|
{
|
|
struct page *page;
|
|
|
|
if (bp->b_addr)
|
|
return bp->b_addr + offset;
|
|
|
|
page = bp->b_pages[offset >> PAGE_SHIFT];
|
|
return page_address(page) + (offset & (PAGE_SIZE-1));
|
|
}
|
|
|
|
void
|
|
xfs_buf_zero(
|
|
struct xfs_buf *bp,
|
|
size_t boff,
|
|
size_t bsize)
|
|
{
|
|
size_t bend;
|
|
|
|
bend = boff + bsize;
|
|
while (boff < bend) {
|
|
struct page *page;
|
|
int page_index, page_offset, csize;
|
|
|
|
page_index = (boff + bp->b_offset) >> PAGE_SHIFT;
|
|
page_offset = (boff + bp->b_offset) & ~PAGE_MASK;
|
|
page = bp->b_pages[page_index];
|
|
csize = min_t(size_t, PAGE_SIZE - page_offset,
|
|
BBTOB(bp->b_length) - boff);
|
|
|
|
ASSERT((csize + page_offset) <= PAGE_SIZE);
|
|
|
|
memset(page_address(page) + page_offset, 0, csize);
|
|
|
|
boff += csize;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Log a message about and stale a buffer that a caller has decided is corrupt.
|
|
*
|
|
* This function should be called for the kinds of metadata corruption that
|
|
* cannot be detect from a verifier, such as incorrect inter-block relationship
|
|
* data. Do /not/ call this function from a verifier function.
|
|
*
|
|
* The buffer must be XBF_DONE prior to the call. Afterwards, the buffer will
|
|
* be marked stale, but b_error will not be set. The caller is responsible for
|
|
* releasing the buffer or fixing it.
|
|
*/
|
|
void
|
|
__xfs_buf_mark_corrupt(
|
|
struct xfs_buf *bp,
|
|
xfs_failaddr_t fa)
|
|
{
|
|
ASSERT(bp->b_flags & XBF_DONE);
|
|
|
|
xfs_buf_corruption_error(bp, fa);
|
|
xfs_buf_stale(bp);
|
|
}
|
|
|
|
/*
|
|
* Handling of buffer targets (buftargs).
|
|
*/
|
|
|
|
/*
|
|
* Wait for any bufs with callbacks that have been submitted but have not yet
|
|
* returned. These buffers will have an elevated hold count, so wait on those
|
|
* while freeing all the buffers only held by the LRU.
|
|
*/
|
|
static enum lru_status
|
|
xfs_buftarg_drain_rele(
|
|
struct list_head *item,
|
|
struct list_lru_one *lru,
|
|
spinlock_t *lru_lock,
|
|
void *arg)
|
|
|
|
{
|
|
struct xfs_buf *bp = container_of(item, struct xfs_buf, b_lru);
|
|
struct list_head *dispose = arg;
|
|
|
|
if (atomic_read(&bp->b_hold) > 1) {
|
|
/* need to wait, so skip it this pass */
|
|
trace_xfs_buf_drain_buftarg(bp, _RET_IP_);
|
|
return LRU_SKIP;
|
|
}
|
|
if (!spin_trylock(&bp->b_lock))
|
|
return LRU_SKIP;
|
|
|
|
/*
|
|
* clear the LRU reference count so the buffer doesn't get
|
|
* ignored in xfs_buf_rele().
|
|
*/
|
|
atomic_set(&bp->b_lru_ref, 0);
|
|
bp->b_state |= XFS_BSTATE_DISPOSE;
|
|
list_lru_isolate_move(lru, item, dispose);
|
|
spin_unlock(&bp->b_lock);
|
|
return LRU_REMOVED;
|
|
}
|
|
|
|
/*
|
|
* Wait for outstanding I/O on the buftarg to complete.
|
|
*/
|
|
void
|
|
xfs_buftarg_wait(
|
|
struct xfs_buftarg *btp)
|
|
{
|
|
/*
|
|
* First wait on the buftarg I/O count for all in-flight buffers to be
|
|
* released. This is critical as new buffers do not make the LRU until
|
|
* they are released.
|
|
*
|
|
* Next, flush the buffer workqueue to ensure all completion processing
|
|
* has finished. Just waiting on buffer locks is not sufficient for
|
|
* async IO as the reference count held over IO is not released until
|
|
* after the buffer lock is dropped. Hence we need to ensure here that
|
|
* all reference counts have been dropped before we start walking the
|
|
* LRU list.
|
|
*/
|
|
while (percpu_counter_sum(&btp->bt_io_count))
|
|
delay(100);
|
|
flush_workqueue(btp->bt_mount->m_buf_workqueue);
|
|
}
|
|
|
|
void
|
|
xfs_buftarg_drain(
|
|
struct xfs_buftarg *btp)
|
|
{
|
|
LIST_HEAD(dispose);
|
|
int loop = 0;
|
|
bool write_fail = false;
|
|
|
|
xfs_buftarg_wait(btp);
|
|
|
|
/* loop until there is nothing left on the lru list. */
|
|
while (list_lru_count(&btp->bt_lru)) {
|
|
list_lru_walk(&btp->bt_lru, xfs_buftarg_drain_rele,
|
|
&dispose, LONG_MAX);
|
|
|
|
while (!list_empty(&dispose)) {
|
|
struct xfs_buf *bp;
|
|
bp = list_first_entry(&dispose, struct xfs_buf, b_lru);
|
|
list_del_init(&bp->b_lru);
|
|
if (bp->b_flags & XBF_WRITE_FAIL) {
|
|
write_fail = true;
|
|
xfs_buf_alert_ratelimited(bp,
|
|
"XFS: Corruption Alert",
|
|
"Corruption Alert: Buffer at daddr 0x%llx had permanent write failures!",
|
|
(long long)xfs_buf_daddr(bp));
|
|
}
|
|
xfs_buf_rele(bp);
|
|
}
|
|
if (loop++ != 0)
|
|
delay(100);
|
|
}
|
|
|
|
/*
|
|
* If one or more failed buffers were freed, that means dirty metadata
|
|
* was thrown away. This should only ever happen after I/O completion
|
|
* handling has elevated I/O error(s) to permanent failures and shuts
|
|
* down the journal.
|
|
*/
|
|
if (write_fail) {
|
|
ASSERT(xlog_is_shutdown(btp->bt_mount->m_log));
|
|
xfs_alert(btp->bt_mount,
|
|
"Please run xfs_repair to determine the extent of the problem.");
|
|
}
|
|
}
|
|
|
|
static enum lru_status
|
|
xfs_buftarg_isolate(
|
|
struct list_head *item,
|
|
struct list_lru_one *lru,
|
|
spinlock_t *lru_lock,
|
|
void *arg)
|
|
{
|
|
struct xfs_buf *bp = container_of(item, struct xfs_buf, b_lru);
|
|
struct list_head *dispose = arg;
|
|
|
|
/*
|
|
* we are inverting the lru lock/bp->b_lock here, so use a trylock.
|
|
* If we fail to get the lock, just skip it.
|
|
*/
|
|
if (!spin_trylock(&bp->b_lock))
|
|
return LRU_SKIP;
|
|
/*
|
|
* Decrement the b_lru_ref count unless the value is already
|
|
* zero. If the value is already zero, we need to reclaim the
|
|
* buffer, otherwise it gets another trip through the LRU.
|
|
*/
|
|
if (atomic_add_unless(&bp->b_lru_ref, -1, 0)) {
|
|
spin_unlock(&bp->b_lock);
|
|
return LRU_ROTATE;
|
|
}
|
|
|
|
bp->b_state |= XFS_BSTATE_DISPOSE;
|
|
list_lru_isolate_move(lru, item, dispose);
|
|
spin_unlock(&bp->b_lock);
|
|
return LRU_REMOVED;
|
|
}
|
|
|
|
static unsigned long
|
|
xfs_buftarg_shrink_scan(
|
|
struct shrinker *shrink,
|
|
struct shrink_control *sc)
|
|
{
|
|
struct xfs_buftarg *btp = container_of(shrink,
|
|
struct xfs_buftarg, bt_shrinker);
|
|
LIST_HEAD(dispose);
|
|
unsigned long freed;
|
|
|
|
freed = list_lru_shrink_walk(&btp->bt_lru, sc,
|
|
xfs_buftarg_isolate, &dispose);
|
|
|
|
while (!list_empty(&dispose)) {
|
|
struct xfs_buf *bp;
|
|
bp = list_first_entry(&dispose, struct xfs_buf, b_lru);
|
|
list_del_init(&bp->b_lru);
|
|
xfs_buf_rele(bp);
|
|
}
|
|
|
|
return freed;
|
|
}
|
|
|
|
static unsigned long
|
|
xfs_buftarg_shrink_count(
|
|
struct shrinker *shrink,
|
|
struct shrink_control *sc)
|
|
{
|
|
struct xfs_buftarg *btp = container_of(shrink,
|
|
struct xfs_buftarg, bt_shrinker);
|
|
return list_lru_shrink_count(&btp->bt_lru, sc);
|
|
}
|
|
|
|
void
|
|
xfs_free_buftarg(
|
|
struct xfs_buftarg *btp)
|
|
{
|
|
unregister_shrinker(&btp->bt_shrinker);
|
|
ASSERT(percpu_counter_sum(&btp->bt_io_count) == 0);
|
|
percpu_counter_destroy(&btp->bt_io_count);
|
|
list_lru_destroy(&btp->bt_lru);
|
|
|
|
blkdev_issue_flush(btp->bt_bdev);
|
|
invalidate_bdev(btp->bt_bdev);
|
|
fs_put_dax(btp->bt_daxdev, btp->bt_mount);
|
|
|
|
kmem_free(btp);
|
|
}
|
|
|
|
int
|
|
xfs_setsize_buftarg(
|
|
xfs_buftarg_t *btp,
|
|
unsigned int sectorsize)
|
|
{
|
|
/* Set up metadata sector size info */
|
|
btp->bt_meta_sectorsize = sectorsize;
|
|
btp->bt_meta_sectormask = sectorsize - 1;
|
|
|
|
if (set_blocksize(btp->bt_bdev, sectorsize)) {
|
|
xfs_warn(btp->bt_mount,
|
|
"Cannot set_blocksize to %u on device %pg",
|
|
sectorsize, btp->bt_bdev);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set up device logical sector size mask */
|
|
btp->bt_logical_sectorsize = bdev_logical_block_size(btp->bt_bdev);
|
|
btp->bt_logical_sectormask = bdev_logical_block_size(btp->bt_bdev) - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* When allocating the initial buffer target we have not yet
|
|
* read in the superblock, so don't know what sized sectors
|
|
* are being used at this early stage. Play safe.
|
|
*/
|
|
STATIC int
|
|
xfs_setsize_buftarg_early(
|
|
xfs_buftarg_t *btp,
|
|
struct block_device *bdev)
|
|
{
|
|
return xfs_setsize_buftarg(btp, bdev_logical_block_size(bdev));
|
|
}
|
|
|
|
struct xfs_buftarg *
|
|
xfs_alloc_buftarg(
|
|
struct xfs_mount *mp,
|
|
struct block_device *bdev)
|
|
{
|
|
xfs_buftarg_t *btp;
|
|
const struct dax_holder_operations *ops = NULL;
|
|
|
|
#if defined(CONFIG_FS_DAX) && defined(CONFIG_MEMORY_FAILURE)
|
|
ops = &xfs_dax_holder_operations;
|
|
#endif
|
|
btp = kmem_zalloc(sizeof(*btp), KM_NOFS);
|
|
|
|
btp->bt_mount = mp;
|
|
btp->bt_dev = bdev->bd_dev;
|
|
btp->bt_bdev = bdev;
|
|
btp->bt_daxdev = fs_dax_get_by_bdev(bdev, &btp->bt_dax_part_off,
|
|
mp, ops);
|
|
|
|
/*
|
|
* Buffer IO error rate limiting. Limit it to no more than 10 messages
|
|
* per 30 seconds so as to not spam logs too much on repeated errors.
|
|
*/
|
|
ratelimit_state_init(&btp->bt_ioerror_rl, 30 * HZ,
|
|
DEFAULT_RATELIMIT_BURST);
|
|
|
|
if (xfs_setsize_buftarg_early(btp, bdev))
|
|
goto error_free;
|
|
|
|
if (list_lru_init(&btp->bt_lru))
|
|
goto error_free;
|
|
|
|
if (percpu_counter_init(&btp->bt_io_count, 0, GFP_KERNEL))
|
|
goto error_lru;
|
|
|
|
btp->bt_shrinker.count_objects = xfs_buftarg_shrink_count;
|
|
btp->bt_shrinker.scan_objects = xfs_buftarg_shrink_scan;
|
|
btp->bt_shrinker.seeks = DEFAULT_SEEKS;
|
|
btp->bt_shrinker.flags = SHRINKER_NUMA_AWARE;
|
|
if (register_shrinker(&btp->bt_shrinker, "xfs-buf:%s",
|
|
mp->m_super->s_id))
|
|
goto error_pcpu;
|
|
return btp;
|
|
|
|
error_pcpu:
|
|
percpu_counter_destroy(&btp->bt_io_count);
|
|
error_lru:
|
|
list_lru_destroy(&btp->bt_lru);
|
|
error_free:
|
|
kmem_free(btp);
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Cancel a delayed write list.
|
|
*
|
|
* Remove each buffer from the list, clear the delwri queue flag and drop the
|
|
* associated buffer reference.
|
|
*/
|
|
void
|
|
xfs_buf_delwri_cancel(
|
|
struct list_head *list)
|
|
{
|
|
struct xfs_buf *bp;
|
|
|
|
while (!list_empty(list)) {
|
|
bp = list_first_entry(list, struct xfs_buf, b_list);
|
|
|
|
xfs_buf_lock(bp);
|
|
bp->b_flags &= ~_XBF_DELWRI_Q;
|
|
list_del_init(&bp->b_list);
|
|
xfs_buf_relse(bp);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Add a buffer to the delayed write list.
|
|
*
|
|
* This queues a buffer for writeout if it hasn't already been. Note that
|
|
* neither this routine nor the buffer list submission functions perform
|
|
* any internal synchronization. It is expected that the lists are thread-local
|
|
* to the callers.
|
|
*
|
|
* Returns true if we queued up the buffer, or false if it already had
|
|
* been on the buffer list.
|
|
*/
|
|
bool
|
|
xfs_buf_delwri_queue(
|
|
struct xfs_buf *bp,
|
|
struct list_head *list)
|
|
{
|
|
ASSERT(xfs_buf_islocked(bp));
|
|
ASSERT(!(bp->b_flags & XBF_READ));
|
|
|
|
/*
|
|
* If the buffer is already marked delwri it already is queued up
|
|
* by someone else for imediate writeout. Just ignore it in that
|
|
* case.
|
|
*/
|
|
if (bp->b_flags & _XBF_DELWRI_Q) {
|
|
trace_xfs_buf_delwri_queued(bp, _RET_IP_);
|
|
return false;
|
|
}
|
|
|
|
trace_xfs_buf_delwri_queue(bp, _RET_IP_);
|
|
|
|
/*
|
|
* If a buffer gets written out synchronously or marked stale while it
|
|
* is on a delwri list we lazily remove it. To do this, the other party
|
|
* clears the _XBF_DELWRI_Q flag but otherwise leaves the buffer alone.
|
|
* It remains referenced and on the list. In a rare corner case it
|
|
* might get readded to a delwri list after the synchronous writeout, in
|
|
* which case we need just need to re-add the flag here.
|
|
*/
|
|
bp->b_flags |= _XBF_DELWRI_Q;
|
|
if (list_empty(&bp->b_list)) {
|
|
atomic_inc(&bp->b_hold);
|
|
list_add_tail(&bp->b_list, list);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Compare function is more complex than it needs to be because
|
|
* the return value is only 32 bits and we are doing comparisons
|
|
* on 64 bit values
|
|
*/
|
|
static int
|
|
xfs_buf_cmp(
|
|
void *priv,
|
|
const struct list_head *a,
|
|
const struct list_head *b)
|
|
{
|
|
struct xfs_buf *ap = container_of(a, struct xfs_buf, b_list);
|
|
struct xfs_buf *bp = container_of(b, struct xfs_buf, b_list);
|
|
xfs_daddr_t diff;
|
|
|
|
diff = ap->b_maps[0].bm_bn - bp->b_maps[0].bm_bn;
|
|
if (diff < 0)
|
|
return -1;
|
|
if (diff > 0)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Submit buffers for write. If wait_list is specified, the buffers are
|
|
* submitted using sync I/O and placed on the wait list such that the caller can
|
|
* iowait each buffer. Otherwise async I/O is used and the buffers are released
|
|
* at I/O completion time. In either case, buffers remain locked until I/O
|
|
* completes and the buffer is released from the queue.
|
|
*/
|
|
static int
|
|
xfs_buf_delwri_submit_buffers(
|
|
struct list_head *buffer_list,
|
|
struct list_head *wait_list)
|
|
{
|
|
struct xfs_buf *bp, *n;
|
|
int pinned = 0;
|
|
struct blk_plug plug;
|
|
|
|
list_sort(NULL, buffer_list, xfs_buf_cmp);
|
|
|
|
blk_start_plug(&plug);
|
|
list_for_each_entry_safe(bp, n, buffer_list, b_list) {
|
|
if (!wait_list) {
|
|
if (!xfs_buf_trylock(bp))
|
|
continue;
|
|
if (xfs_buf_ispinned(bp)) {
|
|
xfs_buf_unlock(bp);
|
|
pinned++;
|
|
continue;
|
|
}
|
|
} else {
|
|
xfs_buf_lock(bp);
|
|
}
|
|
|
|
/*
|
|
* Someone else might have written the buffer synchronously or
|
|
* marked it stale in the meantime. In that case only the
|
|
* _XBF_DELWRI_Q flag got cleared, and we have to drop the
|
|
* reference and remove it from the list here.
|
|
*/
|
|
if (!(bp->b_flags & _XBF_DELWRI_Q)) {
|
|
list_del_init(&bp->b_list);
|
|
xfs_buf_relse(bp);
|
|
continue;
|
|
}
|
|
|
|
trace_xfs_buf_delwri_split(bp, _RET_IP_);
|
|
|
|
/*
|
|
* If we have a wait list, each buffer (and associated delwri
|
|
* queue reference) transfers to it and is submitted
|
|
* synchronously. Otherwise, drop the buffer from the delwri
|
|
* queue and submit async.
|
|
*/
|
|
bp->b_flags &= ~_XBF_DELWRI_Q;
|
|
bp->b_flags |= XBF_WRITE;
|
|
if (wait_list) {
|
|
bp->b_flags &= ~XBF_ASYNC;
|
|
list_move_tail(&bp->b_list, wait_list);
|
|
} else {
|
|
bp->b_flags |= XBF_ASYNC;
|
|
list_del_init(&bp->b_list);
|
|
}
|
|
__xfs_buf_submit(bp, false);
|
|
}
|
|
blk_finish_plug(&plug);
|
|
|
|
return pinned;
|
|
}
|
|
|
|
/*
|
|
* Write out a buffer list asynchronously.
|
|
*
|
|
* This will take the @buffer_list, write all non-locked and non-pinned buffers
|
|
* out and not wait for I/O completion on any of the buffers. This interface
|
|
* is only safely useable for callers that can track I/O completion by higher
|
|
* level means, e.g. AIL pushing as the @buffer_list is consumed in this
|
|
* function.
|
|
*
|
|
* Note: this function will skip buffers it would block on, and in doing so
|
|
* leaves them on @buffer_list so they can be retried on a later pass. As such,
|
|
* it is up to the caller to ensure that the buffer list is fully submitted or
|
|
* cancelled appropriately when they are finished with the list. Failure to
|
|
* cancel or resubmit the list until it is empty will result in leaked buffers
|
|
* at unmount time.
|
|
*/
|
|
int
|
|
xfs_buf_delwri_submit_nowait(
|
|
struct list_head *buffer_list)
|
|
{
|
|
return xfs_buf_delwri_submit_buffers(buffer_list, NULL);
|
|
}
|
|
|
|
/*
|
|
* Write out a buffer list synchronously.
|
|
*
|
|
* This will take the @buffer_list, write all buffers out and wait for I/O
|
|
* completion on all of the buffers. @buffer_list is consumed by the function,
|
|
* so callers must have some other way of tracking buffers if they require such
|
|
* functionality.
|
|
*/
|
|
int
|
|
xfs_buf_delwri_submit(
|
|
struct list_head *buffer_list)
|
|
{
|
|
LIST_HEAD (wait_list);
|
|
int error = 0, error2;
|
|
struct xfs_buf *bp;
|
|
|
|
xfs_buf_delwri_submit_buffers(buffer_list, &wait_list);
|
|
|
|
/* Wait for IO to complete. */
|
|
while (!list_empty(&wait_list)) {
|
|
bp = list_first_entry(&wait_list, struct xfs_buf, b_list);
|
|
|
|
list_del_init(&bp->b_list);
|
|
|
|
/*
|
|
* Wait on the locked buffer, check for errors and unlock and
|
|
* release the delwri queue reference.
|
|
*/
|
|
error2 = xfs_buf_iowait(bp);
|
|
xfs_buf_relse(bp);
|
|
if (!error)
|
|
error = error2;
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Push a single buffer on a delwri queue.
|
|
*
|
|
* The purpose of this function is to submit a single buffer of a delwri queue
|
|
* and return with the buffer still on the original queue. The waiting delwri
|
|
* buffer submission infrastructure guarantees transfer of the delwri queue
|
|
* buffer reference to a temporary wait list. We reuse this infrastructure to
|
|
* transfer the buffer back to the original queue.
|
|
*
|
|
* Note the buffer transitions from the queued state, to the submitted and wait
|
|
* listed state and back to the queued state during this call. The buffer
|
|
* locking and queue management logic between _delwri_pushbuf() and
|
|
* _delwri_queue() guarantee that the buffer cannot be queued to another list
|
|
* before returning.
|
|
*/
|
|
int
|
|
xfs_buf_delwri_pushbuf(
|
|
struct xfs_buf *bp,
|
|
struct list_head *buffer_list)
|
|
{
|
|
LIST_HEAD (submit_list);
|
|
int error;
|
|
|
|
ASSERT(bp->b_flags & _XBF_DELWRI_Q);
|
|
|
|
trace_xfs_buf_delwri_pushbuf(bp, _RET_IP_);
|
|
|
|
/*
|
|
* Isolate the buffer to a new local list so we can submit it for I/O
|
|
* independently from the rest of the original list.
|
|
*/
|
|
xfs_buf_lock(bp);
|
|
list_move(&bp->b_list, &submit_list);
|
|
xfs_buf_unlock(bp);
|
|
|
|
/*
|
|
* Delwri submission clears the DELWRI_Q buffer flag and returns with
|
|
* the buffer on the wait list with the original reference. Rather than
|
|
* bounce the buffer from a local wait list back to the original list
|
|
* after I/O completion, reuse the original list as the wait list.
|
|
*/
|
|
xfs_buf_delwri_submit_buffers(&submit_list, buffer_list);
|
|
|
|
/*
|
|
* The buffer is now locked, under I/O and wait listed on the original
|
|
* delwri queue. Wait for I/O completion, restore the DELWRI_Q flag and
|
|
* return with the buffer unlocked and on the original queue.
|
|
*/
|
|
error = xfs_buf_iowait(bp);
|
|
bp->b_flags |= _XBF_DELWRI_Q;
|
|
xfs_buf_unlock(bp);
|
|
|
|
return error;
|
|
}
|
|
|
|
void xfs_buf_set_ref(struct xfs_buf *bp, int lru_ref)
|
|
{
|
|
/*
|
|
* Set the lru reference count to 0 based on the error injection tag.
|
|
* This allows userspace to disrupt buffer caching for debug/testing
|
|
* purposes.
|
|
*/
|
|
if (XFS_TEST_ERROR(false, bp->b_mount, XFS_ERRTAG_BUF_LRU_REF))
|
|
lru_ref = 0;
|
|
|
|
atomic_set(&bp->b_lru_ref, lru_ref);
|
|
}
|
|
|
|
/*
|
|
* Verify an on-disk magic value against the magic value specified in the
|
|
* verifier structure. The verifier magic is in disk byte order so the caller is
|
|
* expected to pass the value directly from disk.
|
|
*/
|
|
bool
|
|
xfs_verify_magic(
|
|
struct xfs_buf *bp,
|
|
__be32 dmagic)
|
|
{
|
|
struct xfs_mount *mp = bp->b_mount;
|
|
int idx;
|
|
|
|
idx = xfs_has_crc(mp);
|
|
if (WARN_ON(!bp->b_ops || !bp->b_ops->magic[idx]))
|
|
return false;
|
|
return dmagic == bp->b_ops->magic[idx];
|
|
}
|
|
/*
|
|
* Verify an on-disk magic value against the magic value specified in the
|
|
* verifier structure. The verifier magic is in disk byte order so the caller is
|
|
* expected to pass the value directly from disk.
|
|
*/
|
|
bool
|
|
xfs_verify_magic16(
|
|
struct xfs_buf *bp,
|
|
__be16 dmagic)
|
|
{
|
|
struct xfs_mount *mp = bp->b_mount;
|
|
int idx;
|
|
|
|
idx = xfs_has_crc(mp);
|
|
if (WARN_ON(!bp->b_ops || !bp->b_ops->magic16[idx]))
|
|
return false;
|
|
return dmagic == bp->b_ops->magic16[idx];
|
|
}
|