mirror of
https://github.com/torvalds/linux.git
synced 2024-12-15 15:41:58 +00:00
05ec260ede
When trying to get rid of the cross-includes of <mach/id.h> from different drivers, so we can localize ASIC/CPU detection to the mach-ux500 folder, we run into the way the PRCMU handles base addresses and firmware detection. This patch updates the firmware version detection to pass the required information as platform data instead of relying on cpu_is_* macros. Now the PRCMU base address, the secondary TCDM area, the TCPM area and the IRQ are passed as resources instead of being grabbed from <mach/*> files. Incidentally this also removes part of the reliance on <mach/irqs.h>. Further it updates the firmware version detection, since the location of the firmware ID bytes in the designated memory are is now passed from the platform data instead. There is no reason not to include the nice split-off of a struct to hold the firmware information and a separate function to populate it. The patch actually rids the need to use the external db8500_prcmu_early_init call at all, but I'm keepin back that removal as I don't want the patch to be too big. Cc: arm@kernel.org Cc: Michel Jaoen <michel.jaouen@stericsson.com> Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Loic Pallardy <loic.pallardy@stericsson.com> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
241 lines
7.0 KiB
C
241 lines
7.0 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/pl022.h>
|
|
#include <linux/platform_data/dma-ste-dma40.h>
|
|
#include <linux/mfd/dbx500-prcmu.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/setup.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#include "devices-db8500.h"
|
|
#include "ste-dma40-db8500.h"
|
|
|
|
static struct resource dma40_resources[] = {
|
|
[0] = {
|
|
.start = U8500_DMA_BASE,
|
|
.end = U8500_DMA_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
.name = "base",
|
|
},
|
|
[1] = {
|
|
.start = U8500_DMA_LCPA_BASE,
|
|
.end = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
.name = "lcpa",
|
|
},
|
|
[2] = {
|
|
.start = IRQ_DB8500_DMA,
|
|
.end = IRQ_DB8500_DMA,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
/* Default configuration for physcial memcpy */
|
|
struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
|
|
.mode = STEDMA40_MODE_PHYSICAL,
|
|
.dir = STEDMA40_MEM_TO_MEM,
|
|
|
|
.src_info.data_width = STEDMA40_BYTE_WIDTH,
|
|
.src_info.psize = STEDMA40_PSIZE_PHY_1,
|
|
.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
|
|
|
|
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
|
|
.dst_info.psize = STEDMA40_PSIZE_PHY_1,
|
|
.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
|
|
};
|
|
/* Default configuration for logical memcpy */
|
|
struct stedma40_chan_cfg dma40_memcpy_conf_log = {
|
|
.dir = STEDMA40_MEM_TO_MEM,
|
|
|
|
.src_info.data_width = STEDMA40_BYTE_WIDTH,
|
|
.src_info.psize = STEDMA40_PSIZE_LOG_1,
|
|
.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
|
|
|
|
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
|
|
.dst_info.psize = STEDMA40_PSIZE_LOG_1,
|
|
.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
|
|
};
|
|
|
|
/*
|
|
* Mapping between destination event lines and physical device address.
|
|
* The event line is tied to a device and therefore the address is constant.
|
|
* When the address comes from a primecell it will be configured in runtime
|
|
* and we set the address to -1 as a placeholder.
|
|
*/
|
|
static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
|
|
/* MUSB - these will be runtime-reconfigured */
|
|
[DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1,
|
|
[DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1,
|
|
[DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1,
|
|
[DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1,
|
|
[DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1,
|
|
[DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1,
|
|
[DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1,
|
|
[DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1,
|
|
/* PrimeCells - run-time configured */
|
|
[DB8500_DMA_DEV0_SPI0_TX] = -1,
|
|
[DB8500_DMA_DEV1_SD_MMC0_TX] = -1,
|
|
[DB8500_DMA_DEV2_SD_MMC1_TX] = -1,
|
|
[DB8500_DMA_DEV3_SD_MMC2_TX] = -1,
|
|
[DB8500_DMA_DEV8_SSP0_TX] = -1,
|
|
[DB8500_DMA_DEV9_SSP1_TX] = -1,
|
|
[DB8500_DMA_DEV11_UART2_TX] = -1,
|
|
[DB8500_DMA_DEV12_UART1_TX] = -1,
|
|
[DB8500_DMA_DEV13_UART0_TX] = -1,
|
|
[DB8500_DMA_DEV28_SD_MM2_TX] = -1,
|
|
[DB8500_DMA_DEV29_SD_MM0_TX] = -1,
|
|
[DB8500_DMA_DEV32_SD_MM1_TX] = -1,
|
|
[DB8500_DMA_DEV33_SPI2_TX] = -1,
|
|
[DB8500_DMA_DEV35_SPI1_TX] = -1,
|
|
[DB8500_DMA_DEV40_SPI3_TX] = -1,
|
|
[DB8500_DMA_DEV41_SD_MM3_TX] = -1,
|
|
[DB8500_DMA_DEV42_SD_MM4_TX] = -1,
|
|
[DB8500_DMA_DEV43_SD_MM5_TX] = -1,
|
|
[DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
|
|
[DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
|
|
[DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
|
|
[DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET,
|
|
[DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET,
|
|
};
|
|
|
|
/* Mapping between source event lines and physical device address */
|
|
static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
|
|
/* MUSB - these will be runtime-reconfigured */
|
|
[DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1,
|
|
[DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1,
|
|
[DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1,
|
|
[DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1,
|
|
[DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1,
|
|
[DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1,
|
|
[DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1,
|
|
[DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1,
|
|
/* PrimeCells */
|
|
[DB8500_DMA_DEV0_SPI0_RX] = -1,
|
|
[DB8500_DMA_DEV1_SD_MMC0_RX] = -1,
|
|
[DB8500_DMA_DEV2_SD_MMC1_RX] = -1,
|
|
[DB8500_DMA_DEV3_SD_MMC2_RX] = -1,
|
|
[DB8500_DMA_DEV8_SSP0_RX] = -1,
|
|
[DB8500_DMA_DEV9_SSP1_RX] = -1,
|
|
[DB8500_DMA_DEV11_UART2_RX] = -1,
|
|
[DB8500_DMA_DEV12_UART1_RX] = -1,
|
|
[DB8500_DMA_DEV13_UART0_RX] = -1,
|
|
[DB8500_DMA_DEV28_SD_MM2_RX] = -1,
|
|
[DB8500_DMA_DEV29_SD_MM0_RX] = -1,
|
|
[DB8500_DMA_DEV32_SD_MM1_RX] = -1,
|
|
[DB8500_DMA_DEV33_SPI2_RX] = -1,
|
|
[DB8500_DMA_DEV35_SPI1_RX] = -1,
|
|
[DB8500_DMA_DEV40_SPI3_RX] = -1,
|
|
[DB8500_DMA_DEV41_SD_MM3_RX] = -1,
|
|
[DB8500_DMA_DEV42_SD_MM4_RX] = -1,
|
|
[DB8500_DMA_DEV43_SD_MM5_RX] = -1,
|
|
[DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
|
|
[DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
|
|
[DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
|
|
[DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
|
|
};
|
|
|
|
/* Reserved event lines for memcpy only */
|
|
static int dma40_memcpy_event[] = {
|
|
DB8500_DMA_MEMCPY_TX_0,
|
|
DB8500_DMA_MEMCPY_TX_1,
|
|
DB8500_DMA_MEMCPY_TX_2,
|
|
DB8500_DMA_MEMCPY_TX_3,
|
|
DB8500_DMA_MEMCPY_TX_4,
|
|
DB8500_DMA_MEMCPY_TX_5,
|
|
};
|
|
|
|
static struct stedma40_platform_data dma40_plat_data = {
|
|
.dev_len = DB8500_DMA_NR_DEV,
|
|
.dev_rx = dma40_rx_map,
|
|
.dev_tx = dma40_tx_map,
|
|
.memcpy = dma40_memcpy_event,
|
|
.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
|
|
.memcpy_conf_phy = &dma40_memcpy_conf_phy,
|
|
.memcpy_conf_log = &dma40_memcpy_conf_log,
|
|
.disabled_channels = {-1},
|
|
};
|
|
|
|
struct platform_device u8500_dma40_device = {
|
|
.dev = {
|
|
.platform_data = &dma40_plat_data,
|
|
},
|
|
.name = "dma40",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(dma40_resources),
|
|
.resource = dma40_resources
|
|
};
|
|
|
|
struct resource keypad_resources[] = {
|
|
[0] = {
|
|
.start = U8500_SKE_BASE,
|
|
.end = U8500_SKE_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_DB8500_KB,
|
|
.end = IRQ_DB8500_KB,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
struct platform_device u8500_ske_keypad_device = {
|
|
.name = "nmk-ske-keypad",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(keypad_resources),
|
|
.resource = keypad_resources,
|
|
};
|
|
|
|
struct prcmu_pdata db8500_prcmu_pdata = {
|
|
.ab_platdata = &ab8500_platdata,
|
|
.version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
|
|
.legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
|
|
};
|
|
|
|
static struct resource db8500_prcmu_res[] = {
|
|
{
|
|
.name = "prcmu",
|
|
.start = U8500_PRCMU_BASE,
|
|
.end = U8500_PRCMU_BASE + SZ_8K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "prcmu-tcdm",
|
|
.start = U8500_PRCMU_TCDM_BASE,
|
|
.end = U8500_PRCMU_TCDM_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.name = "irq",
|
|
.start = IRQ_DB8500_PRCMU1,
|
|
.end = IRQ_DB8500_PRCMU1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "prcmu-tcpm",
|
|
.start = U8500_PRCMU_TCPM_BASE,
|
|
.end = U8500_PRCMU_TCPM_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
struct platform_device db8500_prcmu_device = {
|
|
.name = "db8500-prcmu",
|
|
.resource = db8500_prcmu_res,
|
|
.num_resources = ARRAY_SIZE(db8500_prcmu_res),
|
|
.dev = {
|
|
.platform_data = &db8500_prcmu_pdata,
|
|
},
|
|
};
|