mirror of
https://github.com/torvalds/linux.git
synced 2024-12-21 10:31:54 +00:00
4fa89346fb
This patch adds a driver for TI's TA5086 6-channel PWM processor. This chip has a very unusual register layout, specifically because the registers are of unequal size, and multi-byte registers require bulk writes to take effect. Regmap does not support these kind of mappings. Currently, the driver does not touch any of the registers >= 0x20, so it doesn't matter, because the register map is mapped to an 8-bit array. In case more features will be added in the future that require access to higher registers, the entire regmap H/W I/O routines have to be open-coded. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
33 lines
863 B
Plaintext
33 lines
863 B
Plaintext
Texas Instruments TAS5086 6-channel PWM Processor
|
|
|
|
Required properties:
|
|
|
|
- compatible: Should contain "ti,tas5086".
|
|
- reg: The i2c address. Should contain <0x1b>.
|
|
|
|
Optional properties:
|
|
|
|
- reset-gpio: A GPIO spec to define which pin is connected to the
|
|
chip's !RESET pin. If specified, the driver will
|
|
assert a hardware reset at probe time.
|
|
|
|
- ti,charge-period: This property should contain the time in microseconds
|
|
that closely matches the external single-ended
|
|
split-capacitor charge period. The hardware chip
|
|
waits for this period of time before starting the
|
|
PWM signals. This helps reduce pops and clicks.
|
|
|
|
When not specified, the hardware default of 1300ms
|
|
is retained.
|
|
|
|
Examples:
|
|
|
|
i2c_bus {
|
|
tas5086@1b {
|
|
compatible = "ti,tas5086";
|
|
reg = <0x1b>;
|
|
reset-gpio = <&gpio 23 0>;
|
|
ti,charge-period = <156000>;
|
|
};
|
|
};
|