mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
d04195b0a3
Remove "model" attribute from fsl_audmix DT document. Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
51 lines
2.1 KiB
Plaintext
51 lines
2.1 KiB
Plaintext
NXP Audio Mixer (AUDMIX).
|
|
|
|
The Audio Mixer is a on-chip functional module that allows mixing of two
|
|
audio streams into a single audio stream. Audio Mixer has two input serial
|
|
audio interfaces. These are driven by two Synchronous Audio interface
|
|
modules (SAI). Each input serial interface carries 8 audio channels in its
|
|
frame in TDM manner. Mixer mixes audio samples of corresponding channels
|
|
from two interfaces into a single sample. Before mixing, audio samples of
|
|
two inputs can be attenuated based on configuration. The output of the
|
|
Audio Mixer is also a serial audio interface. Like input interfaces it has
|
|
the same TDM frame format. This output is used to drive the serial DAC TDM
|
|
interface of audio codec and also sent to the external pins along with the
|
|
receive path of normal audio SAI module for readback by the CPU.
|
|
|
|
The output of Audio Mixer can be selected from any of the three streams
|
|
- serial audio input 1
|
|
- serial audio input 2
|
|
- mixed audio
|
|
|
|
Mixing operation is independent of audio sample rate but the two audio
|
|
input streams must have same audio sample rate with same number of channels
|
|
in TDM frame to be eligible for mixing.
|
|
|
|
Device driver required properties:
|
|
=================================
|
|
- compatible : Compatible list, contains "fsl,imx8qm-audmix"
|
|
|
|
- reg : Offset and length of the register set for the device.
|
|
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
|
|
- clock-names : Must include the "ipg" for register access.
|
|
|
|
- power-domains : Must contain the phandle to AUDMIX power domain node
|
|
|
|
- dais : Must contain a list of phandles to AUDMIX connected
|
|
DAIs. The current implementation requires two phandles
|
|
to SAI interfaces to be provided, the first SAI in the
|
|
list being used to route the AUDMIX output.
|
|
|
|
Device driver configuration example:
|
|
======================================
|
|
audmix: audmix@59840000 {
|
|
compatible = "fsl,imx8qm-audmix";
|
|
reg = <0x0 0x59840000 0x0 0x10000>;
|
|
clocks = <&clk IMX8QXP_AUD_AUDMIX_IPG>;
|
|
clock-names = "ipg";
|
|
power-domains = <&pd_audmix>;
|
|
dais = <&sai4>, <&sai5>;
|
|
};
|