mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 13:11:40 +00:00
528222d853
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
218 lines
5.6 KiB
C
218 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* ir-xmp-decoder.c - handle XMP IR Pulse/Space protocol
|
|
*
|
|
* Copyright (C) 2014 by Marcel Mol
|
|
*
|
|
* - Based on info from http://www.hifi-remote.com
|
|
* - Ignore Toggle=9 frames
|
|
* - Ignore XMP-1 XMP-2 difference, always store 16 bit OBC
|
|
*/
|
|
|
|
#include <linux/bitrev.h>
|
|
#include <linux/module.h>
|
|
#include "rc-core-priv.h"
|
|
|
|
#define XMP_UNIT 136 /* us */
|
|
#define XMP_LEADER 210 /* us */
|
|
#define XMP_NIBBLE_PREFIX 760 /* us */
|
|
#define XMP_HALFFRAME_SPACE 13800 /* us */
|
|
/* should be 80ms but not all duration supliers can go that high */
|
|
#define XMP_TRAILER_SPACE 20000
|
|
|
|
enum xmp_state {
|
|
STATE_INACTIVE,
|
|
STATE_LEADER_PULSE,
|
|
STATE_NIBBLE_SPACE,
|
|
};
|
|
|
|
/**
|
|
* ir_xmp_decode() - Decode one XMP pulse or space
|
|
* @dev: the struct rc_dev descriptor of the device
|
|
* @ev: the struct ir_raw_event descriptor of the pulse/space
|
|
*
|
|
* This function returns -EINVAL if the pulse violates the state machine
|
|
*/
|
|
static int ir_xmp_decode(struct rc_dev *dev, struct ir_raw_event ev)
|
|
{
|
|
struct xmp_dec *data = &dev->raw->xmp;
|
|
|
|
if (!is_timing_event(ev)) {
|
|
if (ev.reset)
|
|
data->state = STATE_INACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
dev_dbg(&dev->dev, "XMP decode started at state %d %d (%uus %s)\n",
|
|
data->state, data->count, ev.duration, TO_STR(ev.pulse));
|
|
|
|
switch (data->state) {
|
|
|
|
case STATE_INACTIVE:
|
|
if (!ev.pulse)
|
|
break;
|
|
|
|
if (eq_margin(ev.duration, XMP_LEADER, XMP_UNIT / 2)) {
|
|
data->count = 0;
|
|
data->state = STATE_NIBBLE_SPACE;
|
|
}
|
|
|
|
return 0;
|
|
|
|
case STATE_LEADER_PULSE:
|
|
if (!ev.pulse)
|
|
break;
|
|
|
|
if (eq_margin(ev.duration, XMP_LEADER, XMP_UNIT / 2))
|
|
data->state = STATE_NIBBLE_SPACE;
|
|
|
|
return 0;
|
|
|
|
case STATE_NIBBLE_SPACE:
|
|
if (ev.pulse)
|
|
break;
|
|
|
|
if (geq_margin(ev.duration, XMP_TRAILER_SPACE, XMP_NIBBLE_PREFIX)) {
|
|
int divider, i;
|
|
u8 addr, subaddr, subaddr2, toggle, oem, obc1, obc2, sum1, sum2;
|
|
u32 *n;
|
|
u32 scancode;
|
|
|
|
if (data->count != 16) {
|
|
dev_dbg(&dev->dev, "received TRAILER period at index %d: %u\n",
|
|
data->count, ev.duration);
|
|
data->state = STATE_INACTIVE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
n = data->durations;
|
|
/*
|
|
* the 4th nibble should be 15 so base the divider on this
|
|
* to transform durations into nibbles. Subtract 2000 from
|
|
* the divider to compensate for fluctuations in the signal
|
|
*/
|
|
divider = (n[3] - XMP_NIBBLE_PREFIX) / 15 - 2000;
|
|
if (divider < 50) {
|
|
dev_dbg(&dev->dev, "divider to small %d.\n",
|
|
divider);
|
|
data->state = STATE_INACTIVE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* convert to nibbles and do some sanity checks */
|
|
for (i = 0; i < 16; i++)
|
|
n[i] = (n[i] - XMP_NIBBLE_PREFIX) / divider;
|
|
sum1 = (15 + n[0] + n[1] + n[2] + n[3] +
|
|
n[4] + n[5] + n[6] + n[7]) % 16;
|
|
sum2 = (15 + n[8] + n[9] + n[10] + n[11] +
|
|
n[12] + n[13] + n[14] + n[15]) % 16;
|
|
|
|
if (sum1 != 15 || sum2 != 15) {
|
|
dev_dbg(&dev->dev, "checksum errors sum1=0x%X sum2=0x%X\n",
|
|
sum1, sum2);
|
|
data->state = STATE_INACTIVE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
subaddr = n[0] << 4 | n[2];
|
|
subaddr2 = n[8] << 4 | n[11];
|
|
oem = n[4] << 4 | n[5];
|
|
addr = n[6] << 4 | n[7];
|
|
toggle = n[10];
|
|
obc1 = n[12] << 4 | n[13];
|
|
obc2 = n[14] << 4 | n[15];
|
|
if (subaddr != subaddr2) {
|
|
dev_dbg(&dev->dev, "subaddress nibbles mismatch 0x%02X != 0x%02X\n",
|
|
subaddr, subaddr2);
|
|
data->state = STATE_INACTIVE;
|
|
return -EINVAL;
|
|
}
|
|
if (oem != 0x44)
|
|
dev_dbg(&dev->dev, "Warning: OEM nibbles 0x%02X. Expected 0x44\n",
|
|
oem);
|
|
|
|
scancode = addr << 24 | subaddr << 16 |
|
|
obc1 << 8 | obc2;
|
|
dev_dbg(&dev->dev, "XMP scancode 0x%06x\n", scancode);
|
|
|
|
if (toggle == 0) {
|
|
rc_keydown(dev, RC_PROTO_XMP, scancode, 0);
|
|
} else {
|
|
rc_repeat(dev);
|
|
dev_dbg(&dev->dev, "Repeat last key\n");
|
|
}
|
|
data->state = STATE_INACTIVE;
|
|
|
|
return 0;
|
|
|
|
} else if (geq_margin(ev.duration, XMP_HALFFRAME_SPACE, XMP_NIBBLE_PREFIX)) {
|
|
/* Expect 8 or 16 nibble pulses. 16 in case of 'final' frame */
|
|
if (data->count == 16) {
|
|
dev_dbg(&dev->dev, "received half frame pulse at index %d. Probably a final frame key-up event: %u\n",
|
|
data->count, ev.duration);
|
|
/*
|
|
* TODO: for now go back to half frame position
|
|
* so trailer can be found and key press
|
|
* can be handled.
|
|
*/
|
|
data->count = 8;
|
|
}
|
|
|
|
else if (data->count != 8)
|
|
dev_dbg(&dev->dev, "received half frame pulse at index %d: %u\n",
|
|
data->count, ev.duration);
|
|
data->state = STATE_LEADER_PULSE;
|
|
|
|
return 0;
|
|
|
|
} else if (geq_margin(ev.duration, XMP_NIBBLE_PREFIX, XMP_UNIT)) {
|
|
/* store nibble raw data, decode after trailer */
|
|
if (data->count == 16) {
|
|
dev_dbg(&dev->dev, "too many pulses (%d) ignoring: %u\n",
|
|
data->count, ev.duration);
|
|
data->state = STATE_INACTIVE;
|
|
return -EINVAL;
|
|
}
|
|
data->durations[data->count] = ev.duration;
|
|
data->count++;
|
|
data->state = STATE_LEADER_PULSE;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
dev_dbg(&dev->dev, "XMP decode failed at count %d state %d (%uus %s)\n",
|
|
data->count, data->state, ev.duration, TO_STR(ev.pulse));
|
|
data->state = STATE_INACTIVE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct ir_raw_handler xmp_handler = {
|
|
.protocols = RC_PROTO_BIT_XMP,
|
|
.decode = ir_xmp_decode,
|
|
.min_timeout = XMP_TRAILER_SPACE,
|
|
};
|
|
|
|
static int __init ir_xmp_decode_init(void)
|
|
{
|
|
ir_raw_handler_register(&xmp_handler);
|
|
|
|
printk(KERN_INFO "IR XMP protocol handler initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit ir_xmp_decode_exit(void)
|
|
{
|
|
ir_raw_handler_unregister(&xmp_handler);
|
|
}
|
|
|
|
module_init(ir_xmp_decode_init);
|
|
module_exit(ir_xmp_decode_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Marcel Mol <marcel@mesa.nl>");
|
|
MODULE_AUTHOR("MESA Consulting (http://www.mesa.nl)");
|
|
MODULE_DESCRIPTION("XMP IR protocol decoder");
|