mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 13:22:23 +00:00
c559a5bc94
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
513 lines
14 KiB
C
513 lines
14 KiB
C
/*
|
|
drivers/net/tulip/tulip.h
|
|
|
|
Copyright 2000,2001 The Linux Kernel Team
|
|
Written/copyright 1994-2001 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License, incorporated herein by reference.
|
|
|
|
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
|
|
for more information on this driver, or visit the project
|
|
Web page at http://sourceforge.net/projects/tulip/
|
|
|
|
*/
|
|
|
|
#ifndef __NET_TULIP_H__
|
|
#define __NET_TULIP_H__
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
|
|
|
|
/* undefine, or define to various debugging levels (>4 == obscene levels) */
|
|
#define TULIP_DEBUG 1
|
|
|
|
#ifdef CONFIG_TULIP_MMIO
|
|
#define TULIP_BAR 1 /* CBMA */
|
|
#else
|
|
#define TULIP_BAR 0 /* CBIO */
|
|
#endif
|
|
|
|
|
|
|
|
struct tulip_chip_table {
|
|
char *chip_name;
|
|
int io_size;
|
|
int valid_intrs; /* CSR7 interrupt enable settings */
|
|
int flags;
|
|
void (*media_timer) (unsigned long);
|
|
work_func_t media_task;
|
|
};
|
|
|
|
|
|
enum tbl_flag {
|
|
HAS_MII = 0x0001,
|
|
HAS_MEDIA_TABLE = 0x0002,
|
|
CSR12_IN_SROM = 0x0004,
|
|
ALWAYS_CHECK_MII = 0x0008,
|
|
HAS_ACPI = 0x0010,
|
|
MC_HASH_ONLY = 0x0020, /* Hash-only multicast filter. */
|
|
HAS_PNICNWAY = 0x0080,
|
|
HAS_NWAY = 0x0040, /* Uses internal NWay xcvr. */
|
|
HAS_INTR_MITIGATION = 0x0100,
|
|
IS_ASIX = 0x0200,
|
|
HAS_8023X = 0x0400,
|
|
COMET_MAC_ADDR = 0x0800,
|
|
HAS_PCI_MWI = 0x1000,
|
|
HAS_PHY_IRQ = 0x2000,
|
|
HAS_SWAPPED_SEEPROM = 0x4000,
|
|
NEEDS_FAKE_MEDIA_TABLE = 0x8000,
|
|
};
|
|
|
|
|
|
/* chip types. careful! order is VERY IMPORTANT here, as these
|
|
* are used throughout the driver as indices into arrays */
|
|
/* Note 21142 == 21143. */
|
|
enum chips {
|
|
DC21040 = 0,
|
|
DC21041 = 1,
|
|
DC21140 = 2,
|
|
DC21142 = 3, DC21143 = 3,
|
|
LC82C168,
|
|
MX98713,
|
|
MX98715,
|
|
MX98725,
|
|
AX88140,
|
|
PNIC2,
|
|
COMET,
|
|
COMPEX9881,
|
|
I21145,
|
|
DM910X,
|
|
CONEXANT,
|
|
};
|
|
|
|
|
|
enum MediaIs {
|
|
MediaIsFD = 1,
|
|
MediaAlwaysFD = 2,
|
|
MediaIsMII = 4,
|
|
MediaIsFx = 8,
|
|
MediaIs100 = 16
|
|
};
|
|
|
|
|
|
/* Offsets to the Command and Status Registers, "CSRs". All accesses
|
|
must be longword instructions and quadword aligned. */
|
|
enum tulip_offsets {
|
|
CSR0 = 0,
|
|
CSR1 = 0x08,
|
|
CSR2 = 0x10,
|
|
CSR3 = 0x18,
|
|
CSR4 = 0x20,
|
|
CSR5 = 0x28,
|
|
CSR6 = 0x30,
|
|
CSR7 = 0x38,
|
|
CSR8 = 0x40,
|
|
CSR9 = 0x48,
|
|
CSR10 = 0x50,
|
|
CSR11 = 0x58,
|
|
CSR12 = 0x60,
|
|
CSR13 = 0x68,
|
|
CSR14 = 0x70,
|
|
CSR15 = 0x78,
|
|
};
|
|
|
|
/* register offset and bits for CFDD PCI config reg */
|
|
enum pci_cfg_driver_reg {
|
|
CFDD = 0x40,
|
|
CFDD_Sleep = (1 << 31),
|
|
CFDD_Snooze = (1 << 30),
|
|
};
|
|
|
|
#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber)
|
|
|
|
/* The bits in the CSR5 status registers, mostly interrupt sources. */
|
|
enum status_bits {
|
|
TimerInt = 0x800,
|
|
SystemError = 0x2000,
|
|
TPLnkFail = 0x1000,
|
|
TPLnkPass = 0x10,
|
|
NormalIntr = 0x10000,
|
|
AbnormalIntr = 0x8000,
|
|
RxJabber = 0x200,
|
|
RxDied = 0x100,
|
|
RxNoBuf = 0x80,
|
|
RxIntr = 0x40,
|
|
TxFIFOUnderflow = 0x20,
|
|
RxErrIntr = 0x10,
|
|
TxJabber = 0x08,
|
|
TxNoBuf = 0x04,
|
|
TxDied = 0x02,
|
|
TxIntr = 0x01,
|
|
};
|
|
|
|
/* bit mask for CSR5 TX/RX process state */
|
|
#define CSR5_TS 0x00700000
|
|
#define CSR5_RS 0x000e0000
|
|
|
|
enum tulip_mode_bits {
|
|
TxThreshold = (1 << 22),
|
|
FullDuplex = (1 << 9),
|
|
TxOn = 0x2000,
|
|
AcceptBroadcast = 0x0100,
|
|
AcceptAllMulticast = 0x0080,
|
|
AcceptAllPhys = 0x0040,
|
|
AcceptRunt = 0x0008,
|
|
RxOn = 0x0002,
|
|
RxTx = (TxOn | RxOn),
|
|
};
|
|
|
|
|
|
enum tulip_busconfig_bits {
|
|
MWI = (1 << 24),
|
|
MRL = (1 << 23),
|
|
MRM = (1 << 21),
|
|
CALShift = 14,
|
|
BurstLenShift = 8,
|
|
};
|
|
|
|
|
|
/* The Tulip Rx and Tx buffer descriptors. */
|
|
struct tulip_rx_desc {
|
|
__le32 status;
|
|
__le32 length;
|
|
__le32 buffer1;
|
|
__le32 buffer2;
|
|
};
|
|
|
|
|
|
struct tulip_tx_desc {
|
|
__le32 status;
|
|
__le32 length;
|
|
__le32 buffer1;
|
|
__le32 buffer2; /* We use only buffer 1. */
|
|
};
|
|
|
|
|
|
enum desc_status_bits {
|
|
DescOwned = 0x80000000,
|
|
DescWholePkt = 0x60000000,
|
|
DescEndPkt = 0x40000000,
|
|
DescStartPkt = 0x20000000,
|
|
DescEndRing = 0x02000000,
|
|
DescUseLink = 0x01000000,
|
|
RxDescFatalErr = 0x008000,
|
|
RxWholePkt = 0x00000300,
|
|
};
|
|
|
|
|
|
enum t21143_csr6_bits {
|
|
csr6_sc = (1<<31),
|
|
csr6_ra = (1<<30),
|
|
csr6_ign_dest_msb = (1<<26),
|
|
csr6_mbo = (1<<25),
|
|
csr6_scr = (1<<24), /* scramble mode flag: can't be set */
|
|
csr6_pcs = (1<<23), /* Enables PCS functions (symbol mode requires csr6_ps be set) default is set */
|
|
csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */
|
|
csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */
|
|
csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */
|
|
csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */
|
|
csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */
|
|
csr6_trh = (1<<15), /* Transmit Threshold high bit */
|
|
csr6_trl = (1<<14), /* Transmit Threshold low bit */
|
|
|
|
/***************************************************************
|
|
* This table shows transmit threshold values based on media *
|
|
* and these two registers (from PNIC1 & 2 docs) Note: this is *
|
|
* all meaningless if sf is set. *
|
|
***************************************************************/
|
|
|
|
/***********************************
|
|
* (trh,trl) * 100BaseTX * 10BaseT *
|
|
***********************************
|
|
* (0,0) * 128 * 72 *
|
|
* (0,1) * 256 * 96 *
|
|
* (1,0) * 512 * 128 *
|
|
* (1,1) * 1024 * 160 *
|
|
***********************************/
|
|
|
|
csr6_fc = (1<<12), /* Forces a collision in next transmission (for testing in loopback mode) */
|
|
csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */
|
|
csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */
|
|
/* set both and you get (PHY) loopback */
|
|
csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */
|
|
csr6_pm = (1<<7), /* Pass All Multicast */
|
|
csr6_pr = (1<<6), /* Promiscuous mode */
|
|
csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */
|
|
csr6_if = (1<<4), /* Inverse Filtering, rejects only addresses in address table: can't be set */
|
|
csr6_pb = (1<<3), /* Pass Bad Frames, (1) causes even bad frames to be passed on */
|
|
csr6_ho = (1<<2), /* Hash-only filtering mode: can't be set */
|
|
csr6_hp = (1<<0), /* Hash/Perfect Receive Filtering Mode: can't be set */
|
|
|
|
csr6_mask_capture = (csr6_sc | csr6_ca),
|
|
csr6_mask_defstate = (csr6_mask_capture | csr6_mbo),
|
|
csr6_mask_hdcap = (csr6_mask_defstate | csr6_hbd | csr6_ps),
|
|
csr6_mask_hdcaptt = (csr6_mask_hdcap | csr6_trh | csr6_trl),
|
|
csr6_mask_fullcap = (csr6_mask_hdcaptt | csr6_fd),
|
|
csr6_mask_fullpromisc = (csr6_pr | csr6_pm),
|
|
csr6_mask_filters = (csr6_hp | csr6_ho | csr6_if),
|
|
csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd),
|
|
};
|
|
|
|
|
|
/* Keep the ring sizes a power of two for efficiency.
|
|
Making the Tx ring too large decreases the effectiveness of channel
|
|
bonding and packet priority.
|
|
There are no ill effects from too-large receive rings. */
|
|
|
|
#define TX_RING_SIZE 32
|
|
#define RX_RING_SIZE 128
|
|
#define MEDIA_MASK 31
|
|
|
|
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
|
|
|
|
#define TULIP_MIN_CACHE_LINE 8 /* in units of 32-bit words */
|
|
|
|
#if defined(__sparc__) || defined(__hppa__)
|
|
/* The UltraSparc PCI controllers will disconnect at every 64-byte
|
|
* crossing anyways so it makes no sense to tell Tulip to burst
|
|
* any more than that.
|
|
*/
|
|
#define TULIP_MAX_CACHE_LINE 16 /* in units of 32-bit words */
|
|
#else
|
|
#define TULIP_MAX_CACHE_LINE 32 /* in units of 32-bit words */
|
|
#endif
|
|
|
|
|
|
/* Ring-wrap flag in length field, use for last ring entry.
|
|
0x01000000 means chain on buffer2 address,
|
|
0x02000000 means use the ring start address in CSR2/3.
|
|
Note: Some work-alike chips do not function correctly in chained mode.
|
|
The ASIX chip works only in chained mode.
|
|
Thus we indicates ring mode, but always write the 'next' field for
|
|
chained mode as well.
|
|
*/
|
|
#define DESC_RING_WRAP 0x02000000
|
|
|
|
|
|
#define EEPROM_SIZE 512 /* 2 << EEPROM_ADDRLEN */
|
|
|
|
|
|
#define RUN_AT(x) (jiffies + (x))
|
|
|
|
#if defined(__i386__) /* AKA get_unaligned() */
|
|
#define get_u16(ptr) (*(u16 *)(ptr))
|
|
#else
|
|
#define get_u16(ptr) (((u8*)(ptr))[0] + (((u8*)(ptr))[1]<<8))
|
|
#endif
|
|
|
|
struct medialeaf {
|
|
u8 type;
|
|
u8 media;
|
|
unsigned char *leafdata;
|
|
};
|
|
|
|
|
|
struct mediatable {
|
|
u16 defaultmedia;
|
|
u8 leafcount;
|
|
u8 csr12dir; /* General purpose pin directions. */
|
|
unsigned has_mii:1;
|
|
unsigned has_nonmii:1;
|
|
unsigned has_reset:6;
|
|
u32 csr15dir;
|
|
u32 csr15val; /* 21143 NWay setting. */
|
|
struct medialeaf mleaf[0];
|
|
};
|
|
|
|
|
|
struct mediainfo {
|
|
struct mediainfo *next;
|
|
int info_type;
|
|
int index;
|
|
unsigned char *info;
|
|
};
|
|
|
|
struct ring_info {
|
|
struct sk_buff *skb;
|
|
dma_addr_t mapping;
|
|
};
|
|
|
|
|
|
struct tulip_private {
|
|
const char *product_name;
|
|
struct net_device *next_module;
|
|
struct tulip_rx_desc *rx_ring;
|
|
struct tulip_tx_desc *tx_ring;
|
|
dma_addr_t rx_ring_dma;
|
|
dma_addr_t tx_ring_dma;
|
|
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
|
|
struct ring_info tx_buffers[TX_RING_SIZE];
|
|
/* The addresses of receive-in-place skbuffs. */
|
|
struct ring_info rx_buffers[RX_RING_SIZE];
|
|
u16 setup_frame[96]; /* Pseudo-Tx frame to init address table. */
|
|
int chip_id;
|
|
int revision;
|
|
int flags;
|
|
struct napi_struct napi;
|
|
struct net_device_stats stats;
|
|
struct timer_list timer; /* Media selection timer. */
|
|
struct timer_list oom_timer; /* Out of memory timer. */
|
|
u32 mc_filter[2];
|
|
spinlock_t lock;
|
|
spinlock_t mii_lock;
|
|
unsigned int cur_rx, cur_tx; /* The next free ring entry */
|
|
unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
|
|
|
|
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
|
|
int mit_on;
|
|
#endif
|
|
unsigned int full_duplex:1; /* Full-duplex operation requested. */
|
|
unsigned int full_duplex_lock:1;
|
|
unsigned int fake_addr:1; /* Multiport board faked address. */
|
|
unsigned int default_port:4; /* Last dev->if_port value. */
|
|
unsigned int media2:4; /* Secondary monitored media port. */
|
|
unsigned int medialock:1; /* Don't sense media type. */
|
|
unsigned int mediasense:1; /* Media sensing in progress. */
|
|
unsigned int nway:1, nwayset:1; /* 21143 internal NWay. */
|
|
unsigned int timeout_recovery:1;
|
|
unsigned int csr0; /* CSR0 setting. */
|
|
unsigned int csr6; /* Current CSR6 control settings. */
|
|
unsigned char eeprom[EEPROM_SIZE]; /* Serial EEPROM contents. */
|
|
void (*link_change) (struct net_device * dev, int csr5);
|
|
u16 sym_advertise, mii_advertise; /* NWay capabilities advertised. */
|
|
u16 lpar; /* 21143 Link partner ability. */
|
|
u16 advertising[4];
|
|
signed char phys[4], mii_cnt; /* MII device addresses. */
|
|
struct mediatable *mtable;
|
|
int cur_index; /* Current media index. */
|
|
int saved_if_port;
|
|
struct pci_dev *pdev;
|
|
int ttimer;
|
|
int susp_rx;
|
|
unsigned long nir;
|
|
void __iomem *base_addr;
|
|
int csr12_shadow;
|
|
int pad0; /* Used for 8-byte alignment */
|
|
struct work_struct media_work;
|
|
struct net_device *dev;
|
|
};
|
|
|
|
|
|
struct eeprom_fixup {
|
|
char *name;
|
|
unsigned char addr0;
|
|
unsigned char addr1;
|
|
unsigned char addr2;
|
|
u16 newtable[32]; /* Max length below. */
|
|
};
|
|
|
|
|
|
/* 21142.c */
|
|
extern u16 t21142_csr14[];
|
|
void t21142_media_task(struct work_struct *work);
|
|
void t21142_start_nway(struct net_device *dev);
|
|
void t21142_lnk_change(struct net_device *dev, int csr5);
|
|
|
|
|
|
/* PNIC2.c */
|
|
void pnic2_lnk_change(struct net_device *dev, int csr5);
|
|
void pnic2_timer(unsigned long data);
|
|
void pnic2_start_nway(struct net_device *dev);
|
|
void pnic2_lnk_change(struct net_device *dev, int csr5);
|
|
|
|
/* eeprom.c */
|
|
void tulip_parse_eeprom(struct net_device *dev);
|
|
int tulip_read_eeprom(struct net_device *dev, int location, int addr_len);
|
|
|
|
/* interrupt.c */
|
|
extern unsigned int tulip_max_interrupt_work;
|
|
extern int tulip_rx_copybreak;
|
|
irqreturn_t tulip_interrupt(int irq, void *dev_instance);
|
|
int tulip_refill_rx(struct net_device *dev);
|
|
#ifdef CONFIG_TULIP_NAPI
|
|
int tulip_poll(struct napi_struct *napi, int budget);
|
|
#endif
|
|
|
|
|
|
/* media.c */
|
|
int tulip_mdio_read(struct net_device *dev, int phy_id, int location);
|
|
void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int value);
|
|
void tulip_select_media(struct net_device *dev, int startup);
|
|
int tulip_check_duplex(struct net_device *dev);
|
|
void tulip_find_mii (struct net_device *dev, int board_idx);
|
|
|
|
/* pnic.c */
|
|
void pnic_do_nway(struct net_device *dev);
|
|
void pnic_lnk_change(struct net_device *dev, int csr5);
|
|
void pnic_timer(unsigned long data);
|
|
|
|
/* timer.c */
|
|
void tulip_media_task(struct work_struct *work);
|
|
void mxic_timer(unsigned long data);
|
|
void comet_timer(unsigned long data);
|
|
|
|
/* tulip_core.c */
|
|
extern int tulip_debug;
|
|
extern const char * const medianame[];
|
|
extern const char tulip_media_cap[];
|
|
extern struct tulip_chip_table tulip_tbl[];
|
|
void oom_timer(unsigned long data);
|
|
extern u8 t21040_csr13[];
|
|
|
|
static inline void tulip_start_rxtx(struct tulip_private *tp)
|
|
{
|
|
void __iomem *ioaddr = tp->base_addr;
|
|
iowrite32(tp->csr6 | RxTx, ioaddr + CSR6);
|
|
barrier();
|
|
(void) ioread32(ioaddr + CSR6); /* mmio sync */
|
|
}
|
|
|
|
static inline void tulip_stop_rxtx(struct tulip_private *tp)
|
|
{
|
|
void __iomem *ioaddr = tp->base_addr;
|
|
u32 csr6 = ioread32(ioaddr + CSR6);
|
|
|
|
if (csr6 & RxTx) {
|
|
unsigned i=1300/10;
|
|
iowrite32(csr6 & ~RxTx, ioaddr + CSR6);
|
|
barrier();
|
|
/* wait until in-flight frame completes.
|
|
* Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
|
|
* Typically expect this loop to end in < 50 us on 100BT.
|
|
*/
|
|
while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
|
|
udelay(10);
|
|
|
|
if (!i)
|
|
printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed"
|
|
" (CSR5 0x%x CSR6 0x%x)\n",
|
|
pci_name(tp->pdev),
|
|
ioread32(ioaddr + CSR5),
|
|
ioread32(ioaddr + CSR6));
|
|
}
|
|
}
|
|
|
|
static inline void tulip_restart_rxtx(struct tulip_private *tp)
|
|
{
|
|
tulip_stop_rxtx(tp);
|
|
udelay(5);
|
|
tulip_start_rxtx(tp);
|
|
}
|
|
|
|
static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr)
|
|
{
|
|
/* Stop and restart the chip's Tx processes. */
|
|
tulip_restart_rxtx(tp);
|
|
/* Trigger an immediate transmit demand. */
|
|
iowrite32(0, ioaddr + CSR1);
|
|
|
|
tp->stats.tx_errors++;
|
|
}
|
|
|
|
#endif /* __NET_TULIP_H__ */
|