mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 06:12:08 +00:00
b8bdf09259
Add binding document for supported thermal implementation in Stingray. Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
106 lines
2.4 KiB
Plaintext
106 lines
2.4 KiB
Plaintext
* Broadcom Stingray Thermal
|
|
|
|
This binding describes thermal sensors that is part of Stingray SoCs.
|
|
|
|
Required properties:
|
|
- compatible : Must be "brcm,sr-thermal"
|
|
- reg : Memory where tmon data will be available.
|
|
- brcm,tmon-mask: A one cell bit mask of valid TMON sources.
|
|
Each bit represents single TMON source.
|
|
- #thermal-sensor-cells : Thermal sensor phandler
|
|
- polling-delay: Max number of milliseconds to wait between polls.
|
|
- thermal-sensors: A list of thermal sensor phandles and specifier.
|
|
specifier value is tmon ID and it should be
|
|
in correspond with brcm,tmon-mask.
|
|
- temperature: trip temperature threshold in millicelsius.
|
|
|
|
Example:
|
|
tmons {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x8f100000 0x100>;
|
|
|
|
tmon: tmon@0 {
|
|
compatible = "brcm,sr-thermal";
|
|
reg = <0x0 0x40>;
|
|
brcm,tmon-mask = <0x3f>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
ihost0_thermal: ihost0-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <1000>;
|
|
thermal-sensors = <&tmon 0>;
|
|
trips {
|
|
cpu-crit {
|
|
temperature = <105000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
ihost1_thermal: ihost1-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <1000>;
|
|
thermal-sensors = <&tmon 1>;
|
|
trips {
|
|
cpu-crit {
|
|
temperature = <105000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
ihost2_thermal: ihost2-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <1000>;
|
|
thermal-sensors = <&tmon 2>;
|
|
trips {
|
|
cpu-crit {
|
|
temperature = <105000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
ihost3_thermal: ihost3-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <1000>;
|
|
thermal-sensors = <&tmon 3>;
|
|
trips {
|
|
cpu-crit {
|
|
temperature = <105000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
crmu_thermal: crmu-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <1000>;
|
|
thermal-sensors = <&tmon 4>;
|
|
trips {
|
|
cpu-crit {
|
|
temperature = <105000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
nitro_thermal: nitro-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <1000>;
|
|
thermal-sensors = <&tmon 5>;
|
|
trips {
|
|
cpu-crit {
|
|
temperature = <105000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|