mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 06:12:08 +00:00
3f3ebfb84a
The clock controller module (CCM) has several clock inputs, which are connected to external crystal oscillators. To reflect this, assign these fixed clocks to the CCM node directly. This especially resolves initialization order dependencies we had with the earlier initialization code: When resolving of the fixed clocks failed in clk-vf610, the code created fixed clocks with a rate of 0. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
42 lines
1.2 KiB
Plaintext
42 lines
1.2 KiB
Plaintext
* Clock bindings for Freescale Vybrid VF610 SOC
|
|
|
|
Required properties:
|
|
- compatible: Should be "fsl,vf610-ccm"
|
|
- reg: Address and length of the register set
|
|
- #clock-cells: Should be <1>
|
|
|
|
Optional properties:
|
|
- clocks: list of clock identifiers which are external input clocks to the
|
|
given clock controller. Please refer the next section to find
|
|
the input clocks for a given controller.
|
|
- clock-names: list of names of clocks which are exteral input clocks to the
|
|
given clock controller.
|
|
|
|
Input clocks for top clock controller:
|
|
- sxosc (external crystal oscillator 32KHz, recommended)
|
|
- fxosc (external crystal oscillator 24MHz, recommended)
|
|
- audio_ext
|
|
- enet_ext
|
|
|
|
The clock consumer should specify the desired clock by having the clock
|
|
ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
|
|
for the full list of VF610 clock IDs.
|
|
|
|
Examples:
|
|
|
|
clks: ccm@4006b000 {
|
|
compatible = "fsl,vf610-ccm";
|
|
reg = <0x4006b000 0x1000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&sxosc>, <&fxosc>;
|
|
clock-names = "sxosc", "fxosc";
|
|
};
|
|
|
|
uart1: serial@40028000 {
|
|
compatible = "fsl,vf610-uart";
|
|
reg = <0x40028000 0x1000>;
|
|
interrupts = <0 62 0x04>;
|
|
clocks = <&clks VF610_CLK_UART1>;
|
|
clock-names = "ipg";
|
|
};
|