mirror of
https://github.com/torvalds/linux.git
synced 2024-12-28 05:41:55 +00:00
49da7e64f3
1. Provides infrastructure for vector IO using recvmmsg/sendmmsg.
1.1. Multi-message read.
1.2. Multi-message write.
1.3. Optimized queue support for multi-packet enqueue/dequeue.
1.4. BQL/DQL support.
2. Implements transports for several transports as well support
for direct wiring of PWEs to NIC. Allows direct connection of VMs
to host, other VMs and network devices with no switch in use.
2.1. Raw socket >4 times higher PPS and 10 times higher tcp RX
than existing pcap based transport (> 4Gbit)
2.2. New tap transport using socket RX and tap xmit. Similar
performance improvements (>4Gbit)
2.3. GRE transport - direct wiring to GRE PWE
2.4. L2TPv3 transport - direct wiring to L2TPv3 PWE
3. Tuning, performance and offload related setting support via ethtool.
4. Initial BPF support - used in tap/raw to avoid software looping
5. Scatter Gather support.
6. VNET and checksum offload support for raw socket transport.
7. TSO/GSO support where applicable or available
8. Migrates all error messages to netdevice_*() and rate limits
them where needed.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
70 lines
2.4 KiB
Makefile
70 lines
2.4 KiB
Makefile
#
|
|
# Copyright (C) 2000, 2002, 2003 Jeff Dike (jdike@karaya.com)
|
|
# Licensed under the GPL
|
|
#
|
|
|
|
# pcap is broken in 2.5 because kbuild doesn't allow pcap.a to be linked
|
|
# in to pcap.o
|
|
|
|
slip-objs := slip_kern.o slip_user.o
|
|
slirp-objs := slirp_kern.o slirp_user.o
|
|
daemon-objs := daemon_kern.o daemon_user.o
|
|
vector-objs := vector_kern.o vector_user.o vector_transports.o
|
|
umcast-objs := umcast_kern.o umcast_user.o
|
|
net-objs := net_kern.o net_user.o
|
|
mconsole-objs := mconsole_kern.o mconsole_user.o
|
|
hostaudio-objs := hostaudio_kern.o
|
|
ubd-objs := ubd_kern.o ubd_user.o
|
|
port-objs := port_kern.o port_user.o
|
|
harddog-objs := harddog_kern.o harddog_user.o
|
|
|
|
LDFLAGS_pcap.o := -r $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libpcap.a)
|
|
|
|
LDFLAGS_vde.o := -r $(shell $(CC) $(CFLAGS) -print-file-name=libvdeplug.a)
|
|
|
|
targets := pcap_kern.o pcap_user.o vde_kern.o vde_user.o
|
|
|
|
$(obj)/pcap.o: $(obj)/pcap_kern.o $(obj)/pcap_user.o
|
|
$(LD) -r -dp -o $@ $^ $(LDFLAGS) $(LDFLAGS_pcap.o)
|
|
|
|
$(obj)/vde.o: $(obj)/vde_kern.o $(obj)/vde_user.o
|
|
$(LD) -r -dp -o $@ $^ $(LDFLAGS) $(LDFLAGS_vde.o)
|
|
|
|
#XXX: The call below does not work because the flags are added before the
|
|
# object name, so nothing from the library gets linked.
|
|
#$(call if_changed,ld)
|
|
|
|
# When the above is fixed, don't forget to add this too!
|
|
#targets += $(obj)/pcap.o
|
|
|
|
obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o
|
|
obj-$(CONFIG_SSL) += ssl.o
|
|
obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o
|
|
|
|
obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o
|
|
obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o
|
|
obj-$(CONFIG_UML_NET_DAEMON) += daemon.o
|
|
obj-$(CONFIG_UML_NET_VECTOR) += vector.o
|
|
obj-$(CONFIG_UML_NET_VDE) += vde.o
|
|
obj-$(CONFIG_UML_NET_MCAST) += umcast.o
|
|
obj-$(CONFIG_UML_NET_PCAP) += pcap.o
|
|
obj-$(CONFIG_UML_NET) += net.o
|
|
obj-$(CONFIG_MCONSOLE) += mconsole.o
|
|
obj-$(CONFIG_MMAPPER) += mmapper_kern.o
|
|
obj-$(CONFIG_BLK_DEV_UBD) += ubd.o
|
|
obj-$(CONFIG_HOSTAUDIO) += hostaudio.o
|
|
obj-$(CONFIG_NULL_CHAN) += null.o
|
|
obj-$(CONFIG_PORT_CHAN) += port.o
|
|
obj-$(CONFIG_PTY_CHAN) += pty.o
|
|
obj-$(CONFIG_TTY_CHAN) += tty.o
|
|
obj-$(CONFIG_XTERM_CHAN) += xterm.o xterm_kern.o
|
|
obj-$(CONFIG_UML_WATCHDOG) += harddog.o
|
|
obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o
|
|
obj-$(CONFIG_UML_RANDOM) += random.o
|
|
|
|
# pcap_user.o must be added explicitly.
|
|
USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o pcap_user.o vde_user.o vector_user.o
|
|
CFLAGS_null.o = -DDEV_NULL=$(DEV_NULL_PATH)
|
|
|
|
include arch/um/scripts/Makefile.rules
|