mirror of
https://github.com/torvalds/linux.git
synced 2024-12-22 10:56:40 +00:00
bd1286f964
Pull SCSI target updates from Nicholas Bellinger: "Things were a lot more calm than previously expected. It's primarily fixes in various areas, with most of the new functionality centering around TCMU backend driver work that Xiubo Li has been driving. Here's the summary on the feature side: - Make T10-PI verify configurable for emulated (FILEIO + RD) backends (Dmitry Monakhov) - Allow target-core/TCMU pass-through to use in-kernel SPC-PR logic (Bryant Ly + MNC) - Add TCMU support for growing ring buffer size (Xiubo Li + MNC) - Add TCMU support for global block data pool (Xiubo Li + MNC) and on the bug-fix side: - Fix COMPARE_AND_WRITE non GOOD status handling for READ phase failures (Gary Guo + nab) - Fix iscsi-target hang with explicitly changing per NodeACL CmdSN number depth with concurrent login driven session reinstatement. (Gary Guo + nab) - Fix ibmvscsis fabric driver ABORT task handling (Bryant Ly) - Fix target-core/FILEIO zero length handling (Bart Van Assche) Also, there was an OOPs introduced with the WRITE_VERIFY changes that I ended up reverting at the last minute, because as not unusual Bart and I could not agree on the fix in time for -rc1. Since it's specific to a conformance test, it's been reverted for now. There is a separate patch in the queue to address the underlying control CDB write overflow regression in >= v4.3 separate from the WRITE_VERIFY revert here, that will be pushed post -rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (30 commits) Revert "target: Fix VERIFY and WRITE VERIFY command parsing" IB/srpt: Avoid that aborting a command triggers a kernel warning IB/srpt: Fix abort handling target/fileio: Fix zero-length READ and WRITE handling ibmvscsis: Do not send aborted task response tcmu: fix module removal due to stuck thread target: Don't force session reset if queue_depth does not change iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement target: Fix compare_and_write_callback handling for non GOOD status tcmu: Recalculate the tcmu_cmd size to save cmd area memories tcmu: Add global data block pool support tcmu: Add dynamic growing data area feature support target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store() target: fixup error message in target_tg_pt_gp_alua_access_type_store() target/user: PGR Support target: Add WRITE_VERIFY_16 Documentation/target: add an example script to configure an iSCSI target target: Use kmalloc_array() in transport_kmap_data_sg() target: Use kmalloc_array() in compare_and_write_callback() target: Improve size determinations in two functions ...
1117 lines
28 KiB
C
1117 lines
28 KiB
C
/*******************************************************************************
|
|
* Filename: target_core_pscsi.c
|
|
*
|
|
* This file contains the generic target mode <-> Linux SCSI subsystem plugin.
|
|
*
|
|
* (c) Copyright 2003-2013 Datera, Inc.
|
|
*
|
|
* Nicholas A. Bellinger <nab@kernel.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include <linux/string.h>
|
|
#include <linux/parser.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/blk_types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/cdrom.h>
|
|
#include <linux/ratelimit.h>
|
|
#include <linux/module.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
|
|
#include <target/target_core_base.h>
|
|
#include <target/target_core_backend.h>
|
|
|
|
#include "target_core_alua.h"
|
|
#include "target_core_internal.h"
|
|
#include "target_core_pscsi.h"
|
|
|
|
#define ISPRINT(a) ((a >= ' ') && (a <= '~'))
|
|
|
|
static inline struct pscsi_dev_virt *PSCSI_DEV(struct se_device *dev)
|
|
{
|
|
return container_of(dev, struct pscsi_dev_virt, dev);
|
|
}
|
|
|
|
static sense_reason_t pscsi_execute_cmd(struct se_cmd *cmd);
|
|
static void pscsi_req_done(struct request *, int);
|
|
|
|
/* pscsi_attach_hba():
|
|
*
|
|
* pscsi_get_sh() used scsi_host_lookup() to locate struct Scsi_Host.
|
|
* from the passed SCSI Host ID.
|
|
*/
|
|
static int pscsi_attach_hba(struct se_hba *hba, u32 host_id)
|
|
{
|
|
struct pscsi_hba_virt *phv;
|
|
|
|
phv = kzalloc(sizeof(struct pscsi_hba_virt), GFP_KERNEL);
|
|
if (!phv) {
|
|
pr_err("Unable to allocate struct pscsi_hba_virt\n");
|
|
return -ENOMEM;
|
|
}
|
|
phv->phv_host_id = host_id;
|
|
phv->phv_mode = PHV_VIRTUAL_HOST_ID;
|
|
|
|
hba->hba_ptr = phv;
|
|
|
|
pr_debug("CORE_HBA[%d] - TCM SCSI HBA Driver %s on"
|
|
" Generic Target Core Stack %s\n", hba->hba_id,
|
|
PSCSI_VERSION, TARGET_CORE_VERSION);
|
|
pr_debug("CORE_HBA[%d] - Attached SCSI HBA to Generic\n",
|
|
hba->hba_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pscsi_detach_hba(struct se_hba *hba)
|
|
{
|
|
struct pscsi_hba_virt *phv = hba->hba_ptr;
|
|
struct Scsi_Host *scsi_host = phv->phv_lld_host;
|
|
|
|
if (scsi_host) {
|
|
scsi_host_put(scsi_host);
|
|
|
|
pr_debug("CORE_HBA[%d] - Detached SCSI HBA: %s from"
|
|
" Generic Target Core\n", hba->hba_id,
|
|
(scsi_host->hostt->name) ? (scsi_host->hostt->name) :
|
|
"Unknown");
|
|
} else
|
|
pr_debug("CORE_HBA[%d] - Detached Virtual SCSI HBA"
|
|
" from Generic Target Core\n", hba->hba_id);
|
|
|
|
kfree(phv);
|
|
hba->hba_ptr = NULL;
|
|
}
|
|
|
|
static int pscsi_pmode_enable_hba(struct se_hba *hba, unsigned long mode_flag)
|
|
{
|
|
struct pscsi_hba_virt *phv = hba->hba_ptr;
|
|
struct Scsi_Host *sh = phv->phv_lld_host;
|
|
/*
|
|
* Release the struct Scsi_Host
|
|
*/
|
|
if (!mode_flag) {
|
|
if (!sh)
|
|
return 0;
|
|
|
|
phv->phv_lld_host = NULL;
|
|
phv->phv_mode = PHV_VIRTUAL_HOST_ID;
|
|
|
|
pr_debug("CORE_HBA[%d] - Disabled pSCSI HBA Passthrough"
|
|
" %s\n", hba->hba_id, (sh->hostt->name) ?
|
|
(sh->hostt->name) : "Unknown");
|
|
|
|
scsi_host_put(sh);
|
|
return 0;
|
|
}
|
|
/*
|
|
* Otherwise, locate struct Scsi_Host from the original passed
|
|
* pSCSI Host ID and enable for phba mode
|
|
*/
|
|
sh = scsi_host_lookup(phv->phv_host_id);
|
|
if (!sh) {
|
|
pr_err("pSCSI: Unable to locate SCSI Host for"
|
|
" phv_host_id: %d\n", phv->phv_host_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
phv->phv_lld_host = sh;
|
|
phv->phv_mode = PHV_LLD_SCSI_HOST_NO;
|
|
|
|
pr_debug("CORE_HBA[%d] - Enabled pSCSI HBA Passthrough %s\n",
|
|
hba->hba_id, (sh->hostt->name) ? (sh->hostt->name) : "Unknown");
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void pscsi_tape_read_blocksize(struct se_device *dev,
|
|
struct scsi_device *sdev)
|
|
{
|
|
unsigned char cdb[MAX_COMMAND_SIZE], *buf;
|
|
int ret;
|
|
|
|
buf = kzalloc(12, GFP_KERNEL);
|
|
if (!buf)
|
|
goto out_free;
|
|
|
|
memset(cdb, 0, MAX_COMMAND_SIZE);
|
|
cdb[0] = MODE_SENSE;
|
|
cdb[4] = 0x0c; /* 12 bytes */
|
|
|
|
ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf, 12, NULL,
|
|
HZ, 1, NULL);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
/*
|
|
* If MODE_SENSE still returns zero, set the default value to 1024.
|
|
*/
|
|
sdev->sector_size = (buf[9] << 16) | (buf[10] << 8) | (buf[11]);
|
|
out_free:
|
|
if (!sdev->sector_size)
|
|
sdev->sector_size = 1024;
|
|
|
|
kfree(buf);
|
|
}
|
|
|
|
static void
|
|
pscsi_set_inquiry_info(struct scsi_device *sdev, struct t10_wwn *wwn)
|
|
{
|
|
unsigned char *buf;
|
|
|
|
if (sdev->inquiry_len < INQUIRY_LEN)
|
|
return;
|
|
|
|
buf = sdev->inquiry;
|
|
if (!buf)
|
|
return;
|
|
/*
|
|
* Use sdev->inquiry from drivers/scsi/scsi_scan.c:scsi_alloc_sdev()
|
|
*/
|
|
memcpy(&wwn->vendor[0], &buf[8], sizeof(wwn->vendor));
|
|
memcpy(&wwn->model[0], &buf[16], sizeof(wwn->model));
|
|
memcpy(&wwn->revision[0], &buf[32], sizeof(wwn->revision));
|
|
}
|
|
|
|
static int
|
|
pscsi_get_inquiry_vpd_serial(struct scsi_device *sdev, struct t10_wwn *wwn)
|
|
{
|
|
unsigned char cdb[MAX_COMMAND_SIZE], *buf;
|
|
int ret;
|
|
|
|
buf = kzalloc(INQUIRY_VPD_SERIAL_LEN, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
memset(cdb, 0, MAX_COMMAND_SIZE);
|
|
cdb[0] = INQUIRY;
|
|
cdb[1] = 0x01; /* Query VPD */
|
|
cdb[2] = 0x80; /* Unit Serial Number */
|
|
cdb[3] = (INQUIRY_VPD_SERIAL_LEN >> 8) & 0xff;
|
|
cdb[4] = (INQUIRY_VPD_SERIAL_LEN & 0xff);
|
|
|
|
ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf,
|
|
INQUIRY_VPD_SERIAL_LEN, NULL, HZ, 1, NULL);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
snprintf(&wwn->unit_serial[0], INQUIRY_VPD_SERIAL_LEN, "%s", &buf[4]);
|
|
|
|
wwn->t10_dev->dev_flags |= DF_FIRMWARE_VPD_UNIT_SERIAL;
|
|
|
|
kfree(buf);
|
|
return 0;
|
|
|
|
out_free:
|
|
kfree(buf);
|
|
return -EPERM;
|
|
}
|
|
|
|
static void
|
|
pscsi_get_inquiry_vpd_device_ident(struct scsi_device *sdev,
|
|
struct t10_wwn *wwn)
|
|
{
|
|
unsigned char cdb[MAX_COMMAND_SIZE], *buf, *page_83;
|
|
int ident_len, page_len, off = 4, ret;
|
|
struct t10_vpd *vpd;
|
|
|
|
buf = kzalloc(INQUIRY_VPD_SERIAL_LEN, GFP_KERNEL);
|
|
if (!buf)
|
|
return;
|
|
|
|
memset(cdb, 0, MAX_COMMAND_SIZE);
|
|
cdb[0] = INQUIRY;
|
|
cdb[1] = 0x01; /* Query VPD */
|
|
cdb[2] = 0x83; /* Device Identifier */
|
|
cdb[3] = (INQUIRY_VPD_DEVICE_IDENTIFIER_LEN >> 8) & 0xff;
|
|
cdb[4] = (INQUIRY_VPD_DEVICE_IDENTIFIER_LEN & 0xff);
|
|
|
|
ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf,
|
|
INQUIRY_VPD_DEVICE_IDENTIFIER_LEN,
|
|
NULL, HZ, 1, NULL);
|
|
if (ret)
|
|
goto out;
|
|
|
|
page_len = (buf[2] << 8) | buf[3];
|
|
while (page_len > 0) {
|
|
/* Grab a pointer to the Identification descriptor */
|
|
page_83 = &buf[off];
|
|
ident_len = page_83[3];
|
|
if (!ident_len) {
|
|
pr_err("page_83[3]: identifier"
|
|
" length zero!\n");
|
|
break;
|
|
}
|
|
pr_debug("T10 VPD Identifier Length: %d\n", ident_len);
|
|
|
|
vpd = kzalloc(sizeof(struct t10_vpd), GFP_KERNEL);
|
|
if (!vpd) {
|
|
pr_err("Unable to allocate memory for"
|
|
" struct t10_vpd\n");
|
|
goto out;
|
|
}
|
|
INIT_LIST_HEAD(&vpd->vpd_list);
|
|
|
|
transport_set_vpd_proto_id(vpd, page_83);
|
|
transport_set_vpd_assoc(vpd, page_83);
|
|
|
|
if (transport_set_vpd_ident_type(vpd, page_83) < 0) {
|
|
off += (ident_len + 4);
|
|
page_len -= (ident_len + 4);
|
|
kfree(vpd);
|
|
continue;
|
|
}
|
|
if (transport_set_vpd_ident(vpd, page_83) < 0) {
|
|
off += (ident_len + 4);
|
|
page_len -= (ident_len + 4);
|
|
kfree(vpd);
|
|
continue;
|
|
}
|
|
|
|
list_add_tail(&vpd->vpd_list, &wwn->t10_vpd_list);
|
|
off += (ident_len + 4);
|
|
page_len -= (ident_len + 4);
|
|
}
|
|
|
|
out:
|
|
kfree(buf);
|
|
}
|
|
|
|
static int pscsi_add_device_to_list(struct se_device *dev,
|
|
struct scsi_device *sd)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct request_queue *q = sd->request_queue;
|
|
|
|
pdv->pdv_sd = sd;
|
|
|
|
if (!sd->queue_depth) {
|
|
sd->queue_depth = PSCSI_DEFAULT_QUEUEDEPTH;
|
|
|
|
pr_err("Set broken SCSI Device %d:%d:%llu"
|
|
" queue_depth to %d\n", sd->channel, sd->id,
|
|
sd->lun, sd->queue_depth);
|
|
}
|
|
|
|
dev->dev_attrib.hw_block_size =
|
|
min_not_zero((int)sd->sector_size, 512);
|
|
dev->dev_attrib.hw_max_sectors =
|
|
min_not_zero(sd->host->max_sectors, queue_max_hw_sectors(q));
|
|
dev->dev_attrib.hw_queue_depth = sd->queue_depth;
|
|
|
|
/*
|
|
* Setup our standard INQUIRY info into se_dev->t10_wwn
|
|
*/
|
|
pscsi_set_inquiry_info(sd, &dev->t10_wwn);
|
|
|
|
/*
|
|
* Locate VPD WWN Information used for various purposes within
|
|
* the Storage Engine.
|
|
*/
|
|
if (!pscsi_get_inquiry_vpd_serial(sd, &dev->t10_wwn)) {
|
|
/*
|
|
* If VPD Unit Serial returned GOOD status, try
|
|
* VPD Device Identification page (0x83).
|
|
*/
|
|
pscsi_get_inquiry_vpd_device_ident(sd, &dev->t10_wwn);
|
|
}
|
|
|
|
/*
|
|
* For TYPE_TAPE, attempt to determine blocksize with MODE_SENSE.
|
|
*/
|
|
if (sd->type == TYPE_TAPE) {
|
|
pscsi_tape_read_blocksize(dev, sd);
|
|
dev->dev_attrib.hw_block_size = sd->sector_size;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct se_device *pscsi_alloc_device(struct se_hba *hba,
|
|
const char *name)
|
|
{
|
|
struct pscsi_dev_virt *pdv;
|
|
|
|
pdv = kzalloc(sizeof(struct pscsi_dev_virt), GFP_KERNEL);
|
|
if (!pdv) {
|
|
pr_err("Unable to allocate memory for struct pscsi_dev_virt\n");
|
|
return NULL;
|
|
}
|
|
|
|
pr_debug("PSCSI: Allocated pdv: %p for %s\n", pdv, name);
|
|
return &pdv->dev;
|
|
}
|
|
|
|
/*
|
|
* Called with struct Scsi_Host->host_lock called.
|
|
*/
|
|
static int pscsi_create_type_disk(struct se_device *dev, struct scsi_device *sd)
|
|
__releases(sh->host_lock)
|
|
{
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct Scsi_Host *sh = sd->host;
|
|
struct block_device *bd;
|
|
int ret;
|
|
|
|
if (scsi_device_get(sd)) {
|
|
pr_err("scsi_device_get() failed for %d:%d:%d:%llu\n",
|
|
sh->host_no, sd->channel, sd->id, sd->lun);
|
|
spin_unlock_irq(sh->host_lock);
|
|
return -EIO;
|
|
}
|
|
spin_unlock_irq(sh->host_lock);
|
|
/*
|
|
* Claim exclusive struct block_device access to struct scsi_device
|
|
* for TYPE_DISK using supplied udev_path
|
|
*/
|
|
bd = blkdev_get_by_path(dev->udev_path,
|
|
FMODE_WRITE|FMODE_READ|FMODE_EXCL, pdv);
|
|
if (IS_ERR(bd)) {
|
|
pr_err("pSCSI: blkdev_get_by_path() failed\n");
|
|
scsi_device_put(sd);
|
|
return PTR_ERR(bd);
|
|
}
|
|
pdv->pdv_bd = bd;
|
|
|
|
ret = pscsi_add_device_to_list(dev, sd);
|
|
if (ret) {
|
|
blkdev_put(pdv->pdv_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL);
|
|
scsi_device_put(sd);
|
|
return ret;
|
|
}
|
|
|
|
pr_debug("CORE_PSCSI[%d] - Added TYPE_DISK for %d:%d:%d:%llu\n",
|
|
phv->phv_host_id, sh->host_no, sd->channel, sd->id, sd->lun);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called with struct Scsi_Host->host_lock called.
|
|
*/
|
|
static int pscsi_create_type_nondisk(struct se_device *dev, struct scsi_device *sd)
|
|
__releases(sh->host_lock)
|
|
{
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct Scsi_Host *sh = sd->host;
|
|
int ret;
|
|
|
|
if (scsi_device_get(sd)) {
|
|
pr_err("scsi_device_get() failed for %d:%d:%d:%llu\n",
|
|
sh->host_no, sd->channel, sd->id, sd->lun);
|
|
spin_unlock_irq(sh->host_lock);
|
|
return -EIO;
|
|
}
|
|
spin_unlock_irq(sh->host_lock);
|
|
|
|
ret = pscsi_add_device_to_list(dev, sd);
|
|
if (ret) {
|
|
scsi_device_put(sd);
|
|
return ret;
|
|
}
|
|
pr_debug("CORE_PSCSI[%d] - Added Type: %s for %d:%d:%d:%llu\n",
|
|
phv->phv_host_id, scsi_device_type(sd->type), sh->host_no,
|
|
sd->channel, sd->id, sd->lun);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pscsi_configure_device(struct se_device *dev)
|
|
{
|
|
struct se_hba *hba = dev->se_hba;
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct scsi_device *sd;
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct Scsi_Host *sh = phv->phv_lld_host;
|
|
int legacy_mode_enable = 0;
|
|
int ret;
|
|
|
|
if (!(pdv->pdv_flags & PDF_HAS_CHANNEL_ID) ||
|
|
!(pdv->pdv_flags & PDF_HAS_TARGET_ID) ||
|
|
!(pdv->pdv_flags & PDF_HAS_LUN_ID)) {
|
|
pr_err("Missing scsi_channel_id=, scsi_target_id= and"
|
|
" scsi_lun_id= parameters\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If not running in PHV_LLD_SCSI_HOST_NO mode, locate the
|
|
* struct Scsi_Host we will need to bring the TCM/pSCSI object online
|
|
*/
|
|
if (!sh) {
|
|
if (phv->phv_mode == PHV_LLD_SCSI_HOST_NO) {
|
|
pr_err("pSCSI: Unable to locate struct"
|
|
" Scsi_Host for PHV_LLD_SCSI_HOST_NO\n");
|
|
return -ENODEV;
|
|
}
|
|
/*
|
|
* For the newer PHV_VIRTUAL_HOST_ID struct scsi_device
|
|
* reference, we enforce that udev_path has been set
|
|
*/
|
|
if (!(dev->dev_flags & DF_USING_UDEV_PATH)) {
|
|
pr_err("pSCSI: udev_path attribute has not"
|
|
" been set before ENABLE=1\n");
|
|
return -EINVAL;
|
|
}
|
|
/*
|
|
* If no scsi_host_id= was passed for PHV_VIRTUAL_HOST_ID,
|
|
* use the original TCM hba ID to reference Linux/SCSI Host No
|
|
* and enable for PHV_LLD_SCSI_HOST_NO mode.
|
|
*/
|
|
if (!(pdv->pdv_flags & PDF_HAS_VIRT_HOST_ID)) {
|
|
if (hba->dev_count) {
|
|
pr_err("pSCSI: Unable to set hba_mode"
|
|
" with active devices\n");
|
|
return -EEXIST;
|
|
}
|
|
|
|
if (pscsi_pmode_enable_hba(hba, 1) != 1)
|
|
return -ENODEV;
|
|
|
|
legacy_mode_enable = 1;
|
|
hba->hba_flags |= HBA_FLAGS_PSCSI_MODE;
|
|
sh = phv->phv_lld_host;
|
|
} else {
|
|
sh = scsi_host_lookup(pdv->pdv_host_id);
|
|
if (!sh) {
|
|
pr_err("pSCSI: Unable to locate"
|
|
" pdv_host_id: %d\n", pdv->pdv_host_id);
|
|
return -EINVAL;
|
|
}
|
|
pdv->pdv_lld_host = sh;
|
|
}
|
|
} else {
|
|
if (phv->phv_mode == PHV_VIRTUAL_HOST_ID) {
|
|
pr_err("pSCSI: PHV_VIRTUAL_HOST_ID set while"
|
|
" struct Scsi_Host exists\n");
|
|
return -EEXIST;
|
|
}
|
|
}
|
|
|
|
spin_lock_irq(sh->host_lock);
|
|
list_for_each_entry(sd, &sh->__devices, siblings) {
|
|
if ((pdv->pdv_channel_id != sd->channel) ||
|
|
(pdv->pdv_target_id != sd->id) ||
|
|
(pdv->pdv_lun_id != sd->lun))
|
|
continue;
|
|
/*
|
|
* Functions will release the held struct scsi_host->host_lock
|
|
* before calling calling pscsi_add_device_to_list() to register
|
|
* struct scsi_device with target_core_mod.
|
|
*/
|
|
switch (sd->type) {
|
|
case TYPE_DISK:
|
|
ret = pscsi_create_type_disk(dev, sd);
|
|
break;
|
|
default:
|
|
ret = pscsi_create_type_nondisk(dev, sd);
|
|
break;
|
|
}
|
|
|
|
if (ret) {
|
|
if (phv->phv_mode == PHV_VIRTUAL_HOST_ID)
|
|
scsi_host_put(sh);
|
|
else if (legacy_mode_enable) {
|
|
pscsi_pmode_enable_hba(hba, 0);
|
|
hba->hba_flags &= ~HBA_FLAGS_PSCSI_MODE;
|
|
}
|
|
pdv->pdv_sd = NULL;
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
spin_unlock_irq(sh->host_lock);
|
|
|
|
pr_err("pSCSI: Unable to locate %d:%d:%d:%d\n", sh->host_no,
|
|
pdv->pdv_channel_id, pdv->pdv_target_id, pdv->pdv_lun_id);
|
|
|
|
if (phv->phv_mode == PHV_VIRTUAL_HOST_ID)
|
|
scsi_host_put(sh);
|
|
else if (legacy_mode_enable) {
|
|
pscsi_pmode_enable_hba(hba, 0);
|
|
hba->hba_flags &= ~HBA_FLAGS_PSCSI_MODE;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void pscsi_dev_call_rcu(struct rcu_head *p)
|
|
{
|
|
struct se_device *dev = container_of(p, struct se_device, rcu_head);
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
|
|
kfree(pdv);
|
|
}
|
|
|
|
static void pscsi_free_device(struct se_device *dev)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct scsi_device *sd = pdv->pdv_sd;
|
|
|
|
if (sd) {
|
|
/*
|
|
* Release exclusive pSCSI internal struct block_device claim for
|
|
* struct scsi_device with TYPE_DISK from pscsi_create_type_disk()
|
|
*/
|
|
if ((sd->type == TYPE_DISK) && pdv->pdv_bd) {
|
|
blkdev_put(pdv->pdv_bd,
|
|
FMODE_WRITE|FMODE_READ|FMODE_EXCL);
|
|
pdv->pdv_bd = NULL;
|
|
}
|
|
/*
|
|
* For HBA mode PHV_LLD_SCSI_HOST_NO, release the reference
|
|
* to struct Scsi_Host now.
|
|
*/
|
|
if ((phv->phv_mode == PHV_LLD_SCSI_HOST_NO) &&
|
|
(phv->phv_lld_host != NULL))
|
|
scsi_host_put(phv->phv_lld_host);
|
|
else if (pdv->pdv_lld_host)
|
|
scsi_host_put(pdv->pdv_lld_host);
|
|
|
|
scsi_device_put(sd);
|
|
|
|
pdv->pdv_sd = NULL;
|
|
}
|
|
call_rcu(&dev->rcu_head, pscsi_dev_call_rcu);
|
|
}
|
|
|
|
static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg,
|
|
unsigned char *sense_buffer)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(cmd->se_dev);
|
|
struct scsi_device *sd = pdv->pdv_sd;
|
|
int result;
|
|
struct pscsi_plugin_task *pt = cmd->priv;
|
|
unsigned char *cdb;
|
|
/*
|
|
* Special case for REPORT_LUNs handling where pscsi_plugin_task has
|
|
* not been allocated because TCM is handling the emulation directly.
|
|
*/
|
|
if (!pt)
|
|
return;
|
|
|
|
cdb = &pt->pscsi_cdb[0];
|
|
result = pt->pscsi_result;
|
|
/*
|
|
* Hack to make sure that Write-Protect modepage is set if R/O mode is
|
|
* forced.
|
|
*/
|
|
if (!cmd->data_length)
|
|
goto after_mode_sense;
|
|
|
|
if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) &&
|
|
(status_byte(result) << 1) == SAM_STAT_GOOD) {
|
|
bool read_only = target_lun_is_rdonly(cmd);
|
|
|
|
if (read_only) {
|
|
unsigned char *buf;
|
|
|
|
buf = transport_kmap_data_sg(cmd);
|
|
if (!buf)
|
|
; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */
|
|
|
|
if (cdb[0] == MODE_SENSE_10) {
|
|
if (!(buf[3] & 0x80))
|
|
buf[3] |= 0x80;
|
|
} else {
|
|
if (!(buf[2] & 0x80))
|
|
buf[2] |= 0x80;
|
|
}
|
|
|
|
transport_kunmap_data_sg(cmd);
|
|
}
|
|
}
|
|
after_mode_sense:
|
|
|
|
if (sd->type != TYPE_TAPE || !cmd->data_length)
|
|
goto after_mode_select;
|
|
|
|
/*
|
|
* Hack to correctly obtain the initiator requested blocksize for
|
|
* TYPE_TAPE. Since this value is dependent upon each tape media,
|
|
* struct scsi_device->sector_size will not contain the correct value
|
|
* by default, so we go ahead and set it so
|
|
* TRANSPORT(dev)->get_blockdev() returns the correct value to the
|
|
* storage engine.
|
|
*/
|
|
if (((cdb[0] == MODE_SELECT) || (cdb[0] == MODE_SELECT_10)) &&
|
|
(status_byte(result) << 1) == SAM_STAT_GOOD) {
|
|
unsigned char *buf;
|
|
u16 bdl;
|
|
u32 blocksize;
|
|
|
|
buf = sg_virt(&sg[0]);
|
|
if (!buf) {
|
|
pr_err("Unable to get buf for scatterlist\n");
|
|
goto after_mode_select;
|
|
}
|
|
|
|
if (cdb[0] == MODE_SELECT)
|
|
bdl = (buf[3]);
|
|
else
|
|
bdl = (buf[6] << 8) | (buf[7]);
|
|
|
|
if (!bdl)
|
|
goto after_mode_select;
|
|
|
|
if (cdb[0] == MODE_SELECT)
|
|
blocksize = (buf[9] << 16) | (buf[10] << 8) |
|
|
(buf[11]);
|
|
else
|
|
blocksize = (buf[13] << 16) | (buf[14] << 8) |
|
|
(buf[15]);
|
|
|
|
sd->sector_size = blocksize;
|
|
}
|
|
after_mode_select:
|
|
|
|
if (sense_buffer && (status_byte(result) & CHECK_CONDITION)) {
|
|
memcpy(sense_buffer, pt->pscsi_sense, TRANSPORT_SENSE_BUFFER);
|
|
cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
|
|
}
|
|
}
|
|
|
|
enum {
|
|
Opt_scsi_host_id, Opt_scsi_channel_id, Opt_scsi_target_id,
|
|
Opt_scsi_lun_id, Opt_err
|
|
};
|
|
|
|
static match_table_t tokens = {
|
|
{Opt_scsi_host_id, "scsi_host_id=%d"},
|
|
{Opt_scsi_channel_id, "scsi_channel_id=%d"},
|
|
{Opt_scsi_target_id, "scsi_target_id=%d"},
|
|
{Opt_scsi_lun_id, "scsi_lun_id=%d"},
|
|
{Opt_err, NULL}
|
|
};
|
|
|
|
static ssize_t pscsi_set_configfs_dev_params(struct se_device *dev,
|
|
const char *page, ssize_t count)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
char *orig, *ptr, *opts;
|
|
substring_t args[MAX_OPT_ARGS];
|
|
int ret = 0, arg, token;
|
|
|
|
opts = kstrdup(page, GFP_KERNEL);
|
|
if (!opts)
|
|
return -ENOMEM;
|
|
|
|
orig = opts;
|
|
|
|
while ((ptr = strsep(&opts, ",\n")) != NULL) {
|
|
if (!*ptr)
|
|
continue;
|
|
|
|
token = match_token(ptr, tokens, args);
|
|
switch (token) {
|
|
case Opt_scsi_host_id:
|
|
if (phv->phv_mode == PHV_LLD_SCSI_HOST_NO) {
|
|
pr_err("PSCSI[%d]: Unable to accept"
|
|
" scsi_host_id while phv_mode =="
|
|
" PHV_LLD_SCSI_HOST_NO\n",
|
|
phv->phv_host_id);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
ret = match_int(args, &arg);
|
|
if (ret)
|
|
goto out;
|
|
pdv->pdv_host_id = arg;
|
|
pr_debug("PSCSI[%d]: Referencing SCSI Host ID:"
|
|
" %d\n", phv->phv_host_id, pdv->pdv_host_id);
|
|
pdv->pdv_flags |= PDF_HAS_VIRT_HOST_ID;
|
|
break;
|
|
case Opt_scsi_channel_id:
|
|
ret = match_int(args, &arg);
|
|
if (ret)
|
|
goto out;
|
|
pdv->pdv_channel_id = arg;
|
|
pr_debug("PSCSI[%d]: Referencing SCSI Channel"
|
|
" ID: %d\n", phv->phv_host_id,
|
|
pdv->pdv_channel_id);
|
|
pdv->pdv_flags |= PDF_HAS_CHANNEL_ID;
|
|
break;
|
|
case Opt_scsi_target_id:
|
|
ret = match_int(args, &arg);
|
|
if (ret)
|
|
goto out;
|
|
pdv->pdv_target_id = arg;
|
|
pr_debug("PSCSI[%d]: Referencing SCSI Target"
|
|
" ID: %d\n", phv->phv_host_id,
|
|
pdv->pdv_target_id);
|
|
pdv->pdv_flags |= PDF_HAS_TARGET_ID;
|
|
break;
|
|
case Opt_scsi_lun_id:
|
|
ret = match_int(args, &arg);
|
|
if (ret)
|
|
goto out;
|
|
pdv->pdv_lun_id = arg;
|
|
pr_debug("PSCSI[%d]: Referencing SCSI LUN ID:"
|
|
" %d\n", phv->phv_host_id, pdv->pdv_lun_id);
|
|
pdv->pdv_flags |= PDF_HAS_LUN_ID;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
out:
|
|
kfree(orig);
|
|
return (!ret) ? count : ret;
|
|
}
|
|
|
|
static ssize_t pscsi_show_configfs_dev_params(struct se_device *dev, char *b)
|
|
{
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct scsi_device *sd = pdv->pdv_sd;
|
|
unsigned char host_id[16];
|
|
ssize_t bl;
|
|
int i;
|
|
|
|
if (phv->phv_mode == PHV_VIRTUAL_HOST_ID)
|
|
snprintf(host_id, 16, "%d", pdv->pdv_host_id);
|
|
else
|
|
snprintf(host_id, 16, "PHBA Mode");
|
|
|
|
bl = sprintf(b, "SCSI Device Bus Location:"
|
|
" Channel ID: %d Target ID: %d LUN: %d Host ID: %s\n",
|
|
pdv->pdv_channel_id, pdv->pdv_target_id, pdv->pdv_lun_id,
|
|
host_id);
|
|
|
|
if (sd) {
|
|
bl += sprintf(b + bl, " ");
|
|
bl += sprintf(b + bl, "Vendor: ");
|
|
for (i = 0; i < 8; i++) {
|
|
if (ISPRINT(sd->vendor[i])) /* printable character? */
|
|
bl += sprintf(b + bl, "%c", sd->vendor[i]);
|
|
else
|
|
bl += sprintf(b + bl, " ");
|
|
}
|
|
bl += sprintf(b + bl, " Model: ");
|
|
for (i = 0; i < 16; i++) {
|
|
if (ISPRINT(sd->model[i])) /* printable character ? */
|
|
bl += sprintf(b + bl, "%c", sd->model[i]);
|
|
else
|
|
bl += sprintf(b + bl, " ");
|
|
}
|
|
bl += sprintf(b + bl, " Rev: ");
|
|
for (i = 0; i < 4; i++) {
|
|
if (ISPRINT(sd->rev[i])) /* printable character ? */
|
|
bl += sprintf(b + bl, "%c", sd->rev[i]);
|
|
else
|
|
bl += sprintf(b + bl, " ");
|
|
}
|
|
bl += sprintf(b + bl, "\n");
|
|
}
|
|
return bl;
|
|
}
|
|
|
|
static void pscsi_bi_endio(struct bio *bio)
|
|
{
|
|
bio_put(bio);
|
|
}
|
|
|
|
static inline struct bio *pscsi_get_bio(int nr_vecs)
|
|
{
|
|
struct bio *bio;
|
|
/*
|
|
* Use bio_malloc() following the comment in for bio -> struct request
|
|
* in block/blk-core.c:blk_make_request()
|
|
*/
|
|
bio = bio_kmalloc(GFP_KERNEL, nr_vecs);
|
|
if (!bio) {
|
|
pr_err("PSCSI: bio_kmalloc() failed\n");
|
|
return NULL;
|
|
}
|
|
bio->bi_end_io = pscsi_bi_endio;
|
|
|
|
return bio;
|
|
}
|
|
|
|
static sense_reason_t
|
|
pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
|
|
struct request *req)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(cmd->se_dev);
|
|
struct bio *bio = NULL;
|
|
struct page *page;
|
|
struct scatterlist *sg;
|
|
u32 data_len = cmd->data_length, i, len, bytes, off;
|
|
int nr_pages = (cmd->data_length + sgl[0].offset +
|
|
PAGE_SIZE - 1) >> PAGE_SHIFT;
|
|
int nr_vecs = 0, rc;
|
|
int rw = (cmd->data_direction == DMA_TO_DEVICE);
|
|
|
|
BUG_ON(!cmd->data_length);
|
|
|
|
pr_debug("PSCSI: nr_pages: %d\n", nr_pages);
|
|
|
|
for_each_sg(sgl, sg, sgl_nents, i) {
|
|
page = sg_page(sg);
|
|
off = sg->offset;
|
|
len = sg->length;
|
|
|
|
pr_debug("PSCSI: i: %d page: %p len: %d off: %d\n", i,
|
|
page, len, off);
|
|
|
|
/*
|
|
* We only have one page of data in each sg element,
|
|
* we can not cross a page boundary.
|
|
*/
|
|
if (off + len > PAGE_SIZE)
|
|
goto fail;
|
|
|
|
if (len > 0 && data_len > 0) {
|
|
bytes = min_t(unsigned int, len, PAGE_SIZE - off);
|
|
bytes = min(bytes, data_len);
|
|
|
|
if (!bio) {
|
|
nr_vecs = min_t(int, BIO_MAX_PAGES, nr_pages);
|
|
nr_pages -= nr_vecs;
|
|
/*
|
|
* Calls bio_kmalloc() and sets bio->bi_end_io()
|
|
*/
|
|
bio = pscsi_get_bio(nr_vecs);
|
|
if (!bio)
|
|
goto fail;
|
|
|
|
if (rw)
|
|
bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
|
|
|
|
pr_debug("PSCSI: Allocated bio: %p,"
|
|
" dir: %s nr_vecs: %d\n", bio,
|
|
(rw) ? "rw" : "r", nr_vecs);
|
|
}
|
|
|
|
pr_debug("PSCSI: Calling bio_add_pc_page() i: %d"
|
|
" bio: %p page: %p len: %d off: %d\n", i, bio,
|
|
page, len, off);
|
|
|
|
rc = bio_add_pc_page(pdv->pdv_sd->request_queue,
|
|
bio, page, bytes, off);
|
|
pr_debug("PSCSI: bio->bi_vcnt: %d nr_vecs: %d\n",
|
|
bio_segments(bio), nr_vecs);
|
|
if (rc != bytes) {
|
|
pr_debug("PSCSI: Reached bio->bi_vcnt max:"
|
|
" %d i: %d bio: %p, allocating another"
|
|
" bio\n", bio->bi_vcnt, i, bio);
|
|
|
|
rc = blk_rq_append_bio(req, bio);
|
|
if (rc) {
|
|
pr_err("pSCSI: failed to append bio\n");
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Clear the pointer so that another bio will
|
|
* be allocated with pscsi_get_bio() above.
|
|
*/
|
|
bio = NULL;
|
|
}
|
|
|
|
data_len -= bytes;
|
|
}
|
|
}
|
|
|
|
if (bio) {
|
|
rc = blk_rq_append_bio(req, bio);
|
|
if (rc) {
|
|
pr_err("pSCSI: failed to append bio\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
fail:
|
|
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
|
|
}
|
|
|
|
static sense_reason_t
|
|
pscsi_parse_cdb(struct se_cmd *cmd)
|
|
{
|
|
if (cmd->se_cmd_flags & SCF_BIDI)
|
|
return TCM_UNSUPPORTED_SCSI_OPCODE;
|
|
|
|
return passthrough_parse_cdb(cmd, pscsi_execute_cmd);
|
|
}
|
|
|
|
static sense_reason_t
|
|
pscsi_execute_cmd(struct se_cmd *cmd)
|
|
{
|
|
struct scatterlist *sgl = cmd->t_data_sg;
|
|
u32 sgl_nents = cmd->t_data_nents;
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(cmd->se_dev);
|
|
struct pscsi_plugin_task *pt;
|
|
struct request *req;
|
|
sense_reason_t ret;
|
|
|
|
/*
|
|
* Dynamically alloc cdb space, since it may be larger than
|
|
* TCM_MAX_COMMAND_SIZE
|
|
*/
|
|
pt = kzalloc(sizeof(*pt) + scsi_command_size(cmd->t_task_cdb), GFP_KERNEL);
|
|
if (!pt) {
|
|
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
|
|
}
|
|
cmd->priv = pt;
|
|
|
|
memcpy(pt->pscsi_cdb, cmd->t_task_cdb,
|
|
scsi_command_size(cmd->t_task_cdb));
|
|
|
|
req = blk_get_request(pdv->pdv_sd->request_queue,
|
|
cmd->data_direction == DMA_TO_DEVICE ?
|
|
REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN,
|
|
GFP_KERNEL);
|
|
if (IS_ERR(req)) {
|
|
pr_err("PSCSI: blk_get_request() failed\n");
|
|
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
|
|
goto fail;
|
|
}
|
|
|
|
scsi_req_init(req);
|
|
|
|
if (sgl) {
|
|
ret = pscsi_map_sg(cmd, sgl, sgl_nents, req);
|
|
if (ret)
|
|
goto fail_put_request;
|
|
}
|
|
|
|
req->end_io = pscsi_req_done;
|
|
req->end_io_data = cmd;
|
|
scsi_req(req)->cmd_len = scsi_command_size(pt->pscsi_cdb);
|
|
scsi_req(req)->cmd = &pt->pscsi_cdb[0];
|
|
if (pdv->pdv_sd->type == TYPE_DISK)
|
|
req->timeout = PS_TIMEOUT_DISK;
|
|
else
|
|
req->timeout = PS_TIMEOUT_OTHER;
|
|
scsi_req(req)->retries = PS_RETRY;
|
|
|
|
blk_execute_rq_nowait(pdv->pdv_sd->request_queue, NULL, req,
|
|
(cmd->sam_task_attr == TCM_HEAD_TAG),
|
|
pscsi_req_done);
|
|
|
|
return 0;
|
|
|
|
fail_put_request:
|
|
blk_put_request(req);
|
|
fail:
|
|
kfree(pt);
|
|
return ret;
|
|
}
|
|
|
|
/* pscsi_get_device_type():
|
|
*
|
|
*
|
|
*/
|
|
static u32 pscsi_get_device_type(struct se_device *dev)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct scsi_device *sd = pdv->pdv_sd;
|
|
|
|
return (sd) ? sd->type : TYPE_NO_LUN;
|
|
}
|
|
|
|
static sector_t pscsi_get_blocks(struct se_device *dev)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
|
|
if (pdv->pdv_bd && pdv->pdv_bd->bd_part)
|
|
return pdv->pdv_bd->bd_part->nr_sects;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pscsi_req_done(struct request *req, int uptodate)
|
|
{
|
|
struct se_cmd *cmd = req->end_io_data;
|
|
struct pscsi_plugin_task *pt = cmd->priv;
|
|
|
|
pt->pscsi_result = scsi_req(req)->result;
|
|
pt->pscsi_resid = scsi_req(req)->resid_len;
|
|
|
|
cmd->scsi_status = status_byte(pt->pscsi_result) << 1;
|
|
if (cmd->scsi_status) {
|
|
pr_debug("PSCSI Status Byte exception at cmd: %p CDB:"
|
|
" 0x%02x Result: 0x%08x\n", cmd, pt->pscsi_cdb[0],
|
|
pt->pscsi_result);
|
|
}
|
|
|
|
switch (host_byte(pt->pscsi_result)) {
|
|
case DID_OK:
|
|
target_complete_cmd(cmd, cmd->scsi_status);
|
|
break;
|
|
default:
|
|
pr_debug("PSCSI Host Byte exception at cmd: %p CDB:"
|
|
" 0x%02x Result: 0x%08x\n", cmd, pt->pscsi_cdb[0],
|
|
pt->pscsi_result);
|
|
target_complete_cmd(cmd, SAM_STAT_CHECK_CONDITION);
|
|
break;
|
|
}
|
|
|
|
memcpy(pt->pscsi_sense, scsi_req(req)->sense, TRANSPORT_SENSE_BUFFER);
|
|
__blk_put_request(req->q, req);
|
|
kfree(pt);
|
|
}
|
|
|
|
static const struct target_backend_ops pscsi_ops = {
|
|
.name = "pscsi",
|
|
.owner = THIS_MODULE,
|
|
.transport_flags = TRANSPORT_FLAG_PASSTHROUGH |
|
|
TRANSPORT_FLAG_PASSTHROUGH_ALUA |
|
|
TRANSPORT_FLAG_PASSTHROUGH_PGR,
|
|
.attach_hba = pscsi_attach_hba,
|
|
.detach_hba = pscsi_detach_hba,
|
|
.pmode_enable_hba = pscsi_pmode_enable_hba,
|
|
.alloc_device = pscsi_alloc_device,
|
|
.configure_device = pscsi_configure_device,
|
|
.free_device = pscsi_free_device,
|
|
.transport_complete = pscsi_transport_complete,
|
|
.parse_cdb = pscsi_parse_cdb,
|
|
.set_configfs_dev_params = pscsi_set_configfs_dev_params,
|
|
.show_configfs_dev_params = pscsi_show_configfs_dev_params,
|
|
.get_device_type = pscsi_get_device_type,
|
|
.get_blocks = pscsi_get_blocks,
|
|
.tb_dev_attrib_attrs = passthrough_attrib_attrs,
|
|
};
|
|
|
|
static int __init pscsi_module_init(void)
|
|
{
|
|
return transport_backend_register(&pscsi_ops);
|
|
}
|
|
|
|
static void __exit pscsi_module_exit(void)
|
|
{
|
|
target_backend_unregister(&pscsi_ops);
|
|
}
|
|
|
|
MODULE_DESCRIPTION("TCM PSCSI subsystem plugin");
|
|
MODULE_AUTHOR("nab@Linux-iSCSI.org");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(pscsi_module_init);
|
|
module_exit(pscsi_module_exit);
|