linux/arch/arm/boot/dts/tegra30-cardhu.dts
Stephen Warren 702b0e4f2f ARM: dt: tegra: rename board files to match SoC
Most ARM ${board}.dts files are already named ${soc}-${board}.dts. This
change modifies the Tegra board files to be named the same way for
consistency.

Once a related change is made in U-Boot, this will cause both U-Boot and
the kernel to use the same names for the .dts files and SoC identifiers,
thus allowing U-Boot's recently added "soc" and "board" environment
variables to be used to construct the name of Tegra .dtb files, and hence
allow board-generic U-Boot bootcmd scripts to be written.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-20 12:30:10 -06:00

172 lines
3.3 KiB
Plaintext

/dts-v1/;
/include/ "tegra30.dtsi"
/ {
model = "NVIDIA Tegra30 Cardhu evaluation board";
compatible = "nvidia,cardhu", "nvidia,tegra30";
memory {
reg = <0x80000000 0x40000000>;
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
dap2_fs_pa2 {
nvidia,pins = "dap2_fs_pa2",
"dap2_sclk_pa3",
"dap2_din_pa4",
"dap2_dout_pa5";
nvidia,function = "i2s1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
};
};
serial@70006000 {
status = "okay";
clock-frequency = <408000000>;
};
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <100000>;
/* ALS and Proximity sensor */
isl29028@44 {
compatible = "isil,isl29028";
reg = <0x44>;
interrupt-parent = <&gpio>;
interrupts = <88 0x04>; /*gpio PL0 */
};
};
i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
interrupts = <179 0x04>; /* gpio PW3 */
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
tps62361 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
};
ahub {
i2s@70080400 {
status = "okay";
};
};
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
};
sdhci@78000600 {
status = "okay";
bus-width = <8>;
};
sound {
compatible = "nvidia,tegra-audio-wm8903-cardhu",
"nvidia,tegra-audio-wm8903";
nvidia,model = "NVIDIA Tegra Cardhu";
nvidia,audio-routing =
"Headphone Jack", "HPOUTR",
"Headphone Jack", "HPOUTL",
"Int Spk", "ROP",
"Int Spk", "RON",
"Int Spk", "LOP",
"Int Spk", "LON",
"Mic Jack", "MICBIAS",
"IN1L", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
};
};