1
0
mirror of https://github.com/torvalds/linux.git synced 2024-12-19 01:23:20 +00:00
linux/drivers/infiniband/hw/qib/qib_common.h
Dave Olson bdf8edcb57 IB/qib: Allow PSM to select from multiple port assignment algorithms
We used to allow only full specification, or using all contexts within
an HCA before moving to the next HCA.  We now allow an additional
method -- round-robining through HCAs -- and make that the default.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21 11:39:36 -07:00

771 lines
25 KiB
C

/*
* Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
* All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _QIB_COMMON_H
#define _QIB_COMMON_H
/*
* This file contains defines, structures, etc. that are used
* to communicate between kernel and user code.
*/
/* This is the IEEE-assigned OUI for QLogic Inc. QLogic_IB */
#define QIB_SRC_OUI_1 0x00
#define QIB_SRC_OUI_2 0x11
#define QIB_SRC_OUI_3 0x75
/* version of protocol header (known to chip also). In the long run,
* we should be able to generate and accept a range of version numbers;
* for now we only accept one, and it's compiled in.
*/
#define IPS_PROTO_VERSION 2
/*
* These are compile time constants that you may want to enable or disable
* if you are trying to debug problems with code or performance.
* QIB_VERBOSE_TRACING define as 1 if you want additional tracing in
* fastpath code
* QIB_TRACE_REGWRITES define as 1 if you want register writes to be
* traced in faspath code
* _QIB_TRACING define as 0 if you want to remove all tracing in a
* compilation unit
*/
/*
* The value in the BTH QP field that QLogic_IB uses to differentiate
* an qlogic_ib protocol IB packet vs standard IB transport
* This it needs to be even (0x656b78), because the LSB is sometimes
* used for the MSB of context. The change may cause a problem
* interoperating with older software.
*/
#define QIB_KD_QP 0x656b78
/*
* These are the status bits readable (in ascii form, 64bit value)
* from the "status" sysfs file. For binary compatibility, values
* must remain as is; removed states can be reused for different
* purposes.
*/
#define QIB_STATUS_INITTED 0x1 /* basic initialization done */
/* Chip has been found and initted */
#define QIB_STATUS_CHIP_PRESENT 0x20
/* IB link is at ACTIVE, usable for data traffic */
#define QIB_STATUS_IB_READY 0x40
/* link is configured, LID, MTU, etc. have been set */
#define QIB_STATUS_IB_CONF 0x80
/* A Fatal hardware error has occurred. */
#define QIB_STATUS_HWERROR 0x200
/*
* The list of usermode accessible registers. Also see Reg_* later in file.
*/
enum qib_ureg {
/* (RO) DMA RcvHdr to be used next. */
ur_rcvhdrtail = 0,
/* (RW) RcvHdr entry to be processed next by host. */
ur_rcvhdrhead = 1,
/* (RO) Index of next Eager index to use. */
ur_rcvegrindextail = 2,
/* (RW) Eager TID to be processed next */
ur_rcvegrindexhead = 3,
/* For internal use only; max register number. */
_QIB_UregMax
};
/* bit values for spi_runtime_flags */
#define QIB_RUNTIME_PCIE 0x0002
#define QIB_RUNTIME_FORCE_WC_ORDER 0x0004
#define QIB_RUNTIME_RCVHDR_COPY 0x0008
#define QIB_RUNTIME_MASTER 0x0010
#define QIB_RUNTIME_RCHK 0x0020
#define QIB_RUNTIME_NODMA_RTAIL 0x0080
#define QIB_RUNTIME_SPECIAL_TRIGGER 0x0100
#define QIB_RUNTIME_SDMA 0x0200
#define QIB_RUNTIME_FORCE_PIOAVAIL 0x0400
#define QIB_RUNTIME_PIO_REGSWAPPED 0x0800
#define QIB_RUNTIME_CTXT_MSB_IN_QP 0x1000
#define QIB_RUNTIME_CTXT_REDIRECT 0x2000
#define QIB_RUNTIME_HDRSUPP 0x4000
/*
* This structure is returned by qib_userinit() immediately after
* open to get implementation-specific info, and info specific to this
* instance.
*
* This struct must have explict pad fields where type sizes
* may result in different alignments between 32 and 64 bit
* programs, since the 64 bit * bit kernel requires the user code
* to have matching offsets
*/
struct qib_base_info {
/* version of hardware, for feature checking. */
__u32 spi_hw_version;
/* version of software, for feature checking. */
__u32 spi_sw_version;
/* QLogic_IB context assigned, goes into sent packets */
__u16 spi_ctxt;
__u16 spi_subctxt;
/*
* IB MTU, packets IB data must be less than this.
* The MTU is in bytes, and will be a multiple of 4 bytes.
*/
__u32 spi_mtu;
/*
* Size of a PIO buffer. Any given packet's total size must be less
* than this (in words). Included is the starting control word, so
* if 513 is returned, then total pkt size is 512 words or less.
*/
__u32 spi_piosize;
/* size of the TID cache in qlogic_ib, in entries */
__u32 spi_tidcnt;
/* size of the TID Eager list in qlogic_ib, in entries */
__u32 spi_tidegrcnt;
/* size of a single receive header queue entry in words. */
__u32 spi_rcvhdrent_size;
/*
* Count of receive header queue entries allocated.
* This may be less than the spu_rcvhdrcnt passed in!.
*/
__u32 spi_rcvhdr_cnt;
/* per-chip and other runtime features bitmap (QIB_RUNTIME_*) */
__u32 spi_runtime_flags;
/* address where hardware receive header queue is mapped */
__u64 spi_rcvhdr_base;
/* user program. */
/* base address of eager TID receive buffers used by hardware. */
__u64 spi_rcv_egrbufs;
/* Allocated by initialization code, not by protocol. */
/*
* Size of each TID buffer in host memory, starting at
* spi_rcv_egrbufs. The buffers are virtually contiguous.
*/
__u32 spi_rcv_egrbufsize;
/*
* The special QP (queue pair) value that identifies an qlogic_ib
* protocol packet from standard IB packets. More, probably much
* more, to be added.
*/
__u32 spi_qpair;
/*
* User register base for init code, not to be used directly by
* protocol or applications. Always points to chip registers,
* for normal or shared context.
*/
__u64 spi_uregbase;
/*
* Maximum buffer size in bytes that can be used in a single TID
* entry (assuming the buffer is aligned to this boundary). This is
* the minimum of what the hardware and software support Guaranteed
* to be a power of 2.
*/
__u32 spi_tid_maxsize;
/*
* alignment of each pio send buffer (byte count
* to add to spi_piobufbase to get to second buffer)
*/
__u32 spi_pioalign;
/*
* The index of the first pio buffer available to this process;
* needed to do lookup in spi_pioavailaddr; not added to
* spi_piobufbase.
*/
__u32 spi_pioindex;
/* number of buffers mapped for this process */
__u32 spi_piocnt;
/*
* Base address of writeonly pio buffers for this process.
* Each buffer has spi_piosize words, and is aligned on spi_pioalign
* boundaries. spi_piocnt buffers are mapped from this address
*/
__u64 spi_piobufbase;
/*
* Base address of readonly memory copy of the pioavail registers.
* There are 2 bits for each buffer.
*/
__u64 spi_pioavailaddr;
/*
* Address where driver updates a copy of the interface and driver
* status (QIB_STATUS_*) as a 64 bit value. It's followed by a
* link status qword (formerly combined with driver status), then a
* string indicating hardware error, if there was one.
*/
__u64 spi_status;
/* number of chip ctxts available to user processes */
__u32 spi_nctxts;
__u16 spi_unit; /* unit number of chip we are using */
__u16 spi_port; /* IB port number we are using */
/* num bufs in each contiguous set */
__u32 spi_rcv_egrperchunk;
/* size in bytes of each contiguous set */
__u32 spi_rcv_egrchunksize;
/* total size of mmap to cover full rcvegrbuffers */
__u32 spi_rcv_egrbuftotlen;
__u32 spi_rhf_offset; /* dword offset in hdrqent for rcvhdr flags */
/* address of readonly memory copy of the rcvhdrq tail register. */
__u64 spi_rcvhdr_tailaddr;
/*
* shared memory pages for subctxts if ctxt is shared; these cover
* all the processes in the group sharing a single context.
* all have enough space for the num_subcontexts value on this job.
*/
__u64 spi_subctxt_uregbase;
__u64 spi_subctxt_rcvegrbuf;
__u64 spi_subctxt_rcvhdr_base;
/* shared memory page for send buffer disarm status */
__u64 spi_sendbuf_status;
} __attribute__ ((aligned(8)));
/*
* This version number is given to the driver by the user code during
* initialization in the spu_userversion field of qib_user_info, so
* the driver can check for compatibility with user code.
*
* The major version changes when data structures
* change in an incompatible way. The driver must be the same or higher
* for initialization to succeed. In some cases, a higher version
* driver will not interoperate with older software, and initialization
* will return an error.
*/
#define QIB_USER_SWMAJOR 1
/*
* Minor version differences are always compatible
* a within a major version, however if user software is larger
* than driver software, some new features and/or structure fields
* may not be implemented; the user code must deal with this if it
* cares, or it must abort after initialization reports the difference.
*/
#define QIB_USER_SWMINOR 11
#define QIB_USER_SWVERSION ((QIB_USER_SWMAJOR << 16) | QIB_USER_SWMINOR)
#ifndef QIB_KERN_TYPE
#define QIB_KERN_TYPE 0
#define QIB_IDSTR "QLogic kernel.org driver"
#endif
/*
* Similarly, this is the kernel version going back to the user. It's
* slightly different, in that we want to tell if the driver was built as
* part of a QLogic release, or from the driver from openfabrics.org,
* kernel.org, or a standard distribution, for support reasons.
* The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
*
* It's returned by the driver to the user code during initialization in the
* spi_sw_version field of qib_base_info, so the user code can in turn
* check for compatibility with the kernel.
*/
#define QIB_KERN_SWVERSION ((QIB_KERN_TYPE << 31) | QIB_USER_SWVERSION)
/*
* If the unit is specified via open, HCA choice is fixed. If port is
* specified, it's also fixed. Otherwise we try to spread contexts
* across ports and HCAs, using different algorithims. WITHIN is
* the old default, prior to this mechanism.
*/
#define QIB_PORT_ALG_ACROSS 0 /* round robin contexts across HCAs, then
* ports; this is the default */
#define QIB_PORT_ALG_WITHIN 1 /* use all contexts on an HCA (round robin
* active ports within), then next HCA */
#define QIB_PORT_ALG_COUNT 2 /* number of algorithm choices */
/*
* This structure is passed to qib_userinit() to tell the driver where
* user code buffers are, sizes, etc. The offsets and sizes of the
* fields must remain unchanged, for binary compatibility. It can
* be extended, if userversion is changed so user code can tell, if needed
*/
struct qib_user_info {
/*
* version of user software, to detect compatibility issues.
* Should be set to QIB_USER_SWVERSION.
*/
__u32 spu_userversion;
__u32 _spu_unused2;
/* size of struct base_info to write to */
__u32 spu_base_info_size;
__u32 spu_port_alg; /* which QIB_PORT_ALG_*; unused user minor < 11 */
/*
* If two or more processes wish to share a context, each process
* must set the spu_subctxt_cnt and spu_subctxt_id to the same
* values. The only restriction on the spu_subctxt_id is that
* it be unique for a given node.
*/
__u16 spu_subctxt_cnt;
__u16 spu_subctxt_id;
__u32 spu_port; /* IB port requested by user if > 0 */
/*
* address of struct base_info to write to
*/
__u64 spu_base_info;
} __attribute__ ((aligned(8)));
/* User commands. */
/* 16 available, was: old set up userspace (for old user code) */
#define QIB_CMD_CTXT_INFO 17 /* find out what resources we got */
#define QIB_CMD_RECV_CTRL 18 /* control receipt of packets */
#define QIB_CMD_TID_UPDATE 19 /* update expected TID entries */
#define QIB_CMD_TID_FREE 20 /* free expected TID entries */
#define QIB_CMD_SET_PART_KEY 21 /* add partition key */
/* 22 available, was: return info on slave processes (for old user code) */
#define QIB_CMD_ASSIGN_CTXT 23 /* allocate HCA and ctxt */
#define QIB_CMD_USER_INIT 24 /* set up userspace */
#define QIB_CMD_UNUSED_1 25
#define QIB_CMD_UNUSED_2 26
#define QIB_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
#define QIB_CMD_POLL_TYPE 28 /* set the kind of polling we want */
#define QIB_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */
/* 30 is unused */
#define QIB_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */
#define QIB_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */
/* 33 available, was a testing feature */
#define QIB_CMD_DISARM_BUFS 34 /* disarm send buffers w/ errors */
#define QIB_CMD_ACK_EVENT 35 /* ack & clear bits */
#define QIB_CMD_CPUS_LIST 36 /* list of cpus allocated, for pinned
* processes: qib_cpus_list */
/*
* QIB_CMD_ACK_EVENT obsoletes QIB_CMD_DISARM_BUFS, but we keep it for
* compatibility with libraries from previous release. The ACK_EVENT
* will take appropriate driver action (if any, just DISARM for now),
* then clear the bits passed in as part of the mask. These bits are
* in the first 64bit word at spi_sendbuf_status, and are passed to
* the driver in the event_mask union as well.
*/
#define _QIB_EVENT_DISARM_BUFS_BIT 0
#define _QIB_EVENT_LINKDOWN_BIT 1
#define _QIB_EVENT_LID_CHANGE_BIT 2
#define _QIB_EVENT_LMC_CHANGE_BIT 3
#define _QIB_EVENT_SL2VL_CHANGE_BIT 4
#define _QIB_MAX_EVENT_BIT _QIB_EVENT_SL2VL_CHANGE_BIT
#define QIB_EVENT_DISARM_BUFS_BIT (1UL << _QIB_EVENT_DISARM_BUFS_BIT)
#define QIB_EVENT_LINKDOWN_BIT (1UL << _QIB_EVENT_LINKDOWN_BIT)
#define QIB_EVENT_LID_CHANGE_BIT (1UL << _QIB_EVENT_LID_CHANGE_BIT)
#define QIB_EVENT_LMC_CHANGE_BIT (1UL << _QIB_EVENT_LMC_CHANGE_BIT)
#define QIB_EVENT_SL2VL_CHANGE_BIT (1UL << _QIB_EVENT_SL2VL_CHANGE_BIT)
/*
* Poll types
*/
#define QIB_POLL_TYPE_ANYRCV 0x0
#define QIB_POLL_TYPE_URGENT 0x1
struct qib_ctxt_info {
__u16 num_active; /* number of active units */
__u16 unit; /* unit (chip) assigned to caller */
__u16 port; /* IB port assigned to caller (1-based) */
__u16 ctxt; /* ctxt on unit assigned to caller */
__u16 subctxt; /* subctxt on unit assigned to caller */
__u16 num_ctxts; /* number of ctxts available on unit */
__u16 num_subctxts; /* number of subctxts opened on ctxt */
__u16 rec_cpu; /* cpu # for affinity (ffff if none) */
};
struct qib_tid_info {
__u32 tidcnt;
/* make structure same size in 32 and 64 bit */
__u32 tid__unused;
/* virtual address of first page in transfer */
__u64 tidvaddr;
/* pointer (same size 32/64 bit) to __u16 tid array */
__u64 tidlist;
/*
* pointer (same size 32/64 bit) to bitmap of TIDs used
* for this call; checked for being large enough at open
*/
__u64 tidmap;
};
struct qib_cmd {
__u32 type; /* command type */
union {
struct qib_tid_info tid_info;
struct qib_user_info user_info;
/*
* address in userspace where we should put the sdma
* inflight counter
*/
__u64 sdma_inflight;
/*
* address in userspace where we should put the sdma
* completion counter
*/
__u64 sdma_complete;
/* address in userspace of struct qib_ctxt_info to
write result to */
__u64 ctxt_info;
/* enable/disable receipt of packets */
__u32 recv_ctrl;
/* enable/disable armlaunch errors (non-zero to enable) */
__u32 armlaunch_ctrl;
/* partition key to set */
__u16 part_key;
/* user address of __u32 bitmask of active slaves */
__u64 slave_mask_addr;
/* type of polling we want */
__u16 poll_type;
/* back pressure enable bit for one particular context */
__u8 ctxt_bp;
/* qib_user_event_ack(), IPATH_EVENT_* bits */
__u64 event_mask;
} cmd;
};
struct qib_iovec {
/* Pointer to data, but same size 32 and 64 bit */
__u64 iov_base;
/*
* Length of data; don't need 64 bits, but want
* qib_sendpkt to remain same size as before 32 bit changes, so...
*/
__u64 iov_len;
};
/*
* Describes a single packet for send. Each packet can have one or more
* buffers, but the total length (exclusive of IB headers) must be less
* than the MTU, and if using the PIO method, entire packet length,
* including IB headers, must be less than the qib_piosize value (words).
* Use of this necessitates including sys/uio.h
*/
struct __qib_sendpkt {
__u32 sps_flags; /* flags for packet (TBD) */
__u32 sps_cnt; /* number of entries to use in sps_iov */
/* array of iov's describing packet. TEMPORARY */
struct qib_iovec sps_iov[4];
};
/*
* Diagnostics can send a packet by "writing" the following
* structs to the diag data special file.
* This allows a custom
* pbc (+ static rate) qword, so that special modes and deliberate
* changes to CRCs can be used. The elements were also re-ordered
* for better alignment and to avoid padding issues.
*/
#define _DIAG_XPKT_VERS 3
struct qib_diag_xpkt {
__u16 version;
__u16 unit;
__u16 port;
__u16 len;
__u64 data;
__u64 pbc_wd;
};
/*
* Data layout in I2C flash (for GUID, etc.)
* All fields are little-endian binary unless otherwise stated
*/
#define QIB_FLASH_VERSION 2
struct qib_flash {
/* flash layout version (QIB_FLASH_VERSION) */
__u8 if_fversion;
/* checksum protecting if_length bytes */
__u8 if_csum;
/*
* valid length (in use, protected by if_csum), including
* if_fversion and if_csum themselves)
*/
__u8 if_length;
/* the GUID, in network order */
__u8 if_guid[8];
/* number of GUIDs to use, starting from if_guid */
__u8 if_numguid;
/* the (last 10 characters of) board serial number, in ASCII */
char if_serial[12];
/* board mfg date (YYYYMMDD ASCII) */
char if_mfgdate[8];
/* last board rework/test date (YYYYMMDD ASCII) */
char if_testdate[8];
/* logging of error counts, TBD */
__u8 if_errcntp[4];
/* powered on hours, updated at driver unload */
__u8 if_powerhour[2];
/* ASCII free-form comment field */
char if_comment[32];
/* Backwards compatible prefix for longer QLogic Serial Numbers */
char if_sprefix[4];
/* 82 bytes used, min flash size is 128 bytes */
__u8 if_future[46];
};
/*
* These are the counters implemented in the chip, and are listed in order.
* The InterCaps naming is taken straight from the chip spec.
*/
struct qlogic_ib_counters {
__u64 LBIntCnt;
__u64 LBFlowStallCnt;
__u64 TxSDmaDescCnt; /* was Reserved1 */
__u64 TxUnsupVLErrCnt;
__u64 TxDataPktCnt;
__u64 TxFlowPktCnt;
__u64 TxDwordCnt;
__u64 TxLenErrCnt;
__u64 TxMaxMinLenErrCnt;
__u64 TxUnderrunCnt;
__u64 TxFlowStallCnt;
__u64 TxDroppedPktCnt;
__u64 RxDroppedPktCnt;
__u64 RxDataPktCnt;
__u64 RxFlowPktCnt;
__u64 RxDwordCnt;
__u64 RxLenErrCnt;
__u64 RxMaxMinLenErrCnt;
__u64 RxICRCErrCnt;
__u64 RxVCRCErrCnt;
__u64 RxFlowCtrlErrCnt;
__u64 RxBadFormatCnt;
__u64 RxLinkProblemCnt;
__u64 RxEBPCnt;
__u64 RxLPCRCErrCnt;
__u64 RxBufOvflCnt;
__u64 RxTIDFullErrCnt;
__u64 RxTIDValidErrCnt;
__u64 RxPKeyMismatchCnt;
__u64 RxP0HdrEgrOvflCnt;
__u64 RxP1HdrEgrOvflCnt;
__u64 RxP2HdrEgrOvflCnt;
__u64 RxP3HdrEgrOvflCnt;
__u64 RxP4HdrEgrOvflCnt;
__u64 RxP5HdrEgrOvflCnt;
__u64 RxP6HdrEgrOvflCnt;
__u64 RxP7HdrEgrOvflCnt;
__u64 RxP8HdrEgrOvflCnt;
__u64 RxP9HdrEgrOvflCnt;
__u64 RxP10HdrEgrOvflCnt;
__u64 RxP11HdrEgrOvflCnt;
__u64 RxP12HdrEgrOvflCnt;
__u64 RxP13HdrEgrOvflCnt;
__u64 RxP14HdrEgrOvflCnt;
__u64 RxP15HdrEgrOvflCnt;
__u64 RxP16HdrEgrOvflCnt;
__u64 IBStatusChangeCnt;
__u64 IBLinkErrRecoveryCnt;
__u64 IBLinkDownedCnt;
__u64 IBSymbolErrCnt;
__u64 RxVL15DroppedPktCnt;
__u64 RxOtherLocalPhyErrCnt;
__u64 PcieRetryBufDiagQwordCnt;
__u64 ExcessBufferOvflCnt;
__u64 LocalLinkIntegrityErrCnt;
__u64 RxVlErrCnt;
__u64 RxDlidFltrCnt;
};
/*
* The next set of defines are for packet headers, and chip register
* and memory bits that are visible to and/or used by user-mode software.
*/
/* RcvHdrFlags bits */
#define QLOGIC_IB_RHF_LENGTH_MASK 0x7FF
#define QLOGIC_IB_RHF_LENGTH_SHIFT 0
#define QLOGIC_IB_RHF_RCVTYPE_MASK 0x7
#define QLOGIC_IB_RHF_RCVTYPE_SHIFT 11
#define QLOGIC_IB_RHF_EGRINDEX_MASK 0xFFF
#define QLOGIC_IB_RHF_EGRINDEX_SHIFT 16
#define QLOGIC_IB_RHF_SEQ_MASK 0xF
#define QLOGIC_IB_RHF_SEQ_SHIFT 0
#define QLOGIC_IB_RHF_HDRQ_OFFSET_MASK 0x7FF
#define QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT 4
#define QLOGIC_IB_RHF_H_ICRCERR 0x80000000
#define QLOGIC_IB_RHF_H_VCRCERR 0x40000000
#define QLOGIC_IB_RHF_H_PARITYERR 0x20000000
#define QLOGIC_IB_RHF_H_LENERR 0x10000000
#define QLOGIC_IB_RHF_H_MTUERR 0x08000000
#define QLOGIC_IB_RHF_H_IHDRERR 0x04000000
#define QLOGIC_IB_RHF_H_TIDERR 0x02000000
#define QLOGIC_IB_RHF_H_MKERR 0x01000000
#define QLOGIC_IB_RHF_H_IBERR 0x00800000
#define QLOGIC_IB_RHF_H_ERR_MASK 0xFF800000
#define QLOGIC_IB_RHF_L_USE_EGR 0x80000000
#define QLOGIC_IB_RHF_L_SWA 0x00008000
#define QLOGIC_IB_RHF_L_SWB 0x00004000
/* qlogic_ib header fields */
#define QLOGIC_IB_I_VERS_MASK 0xF
#define QLOGIC_IB_I_VERS_SHIFT 28
#define QLOGIC_IB_I_CTXT_MASK 0xF
#define QLOGIC_IB_I_CTXT_SHIFT 24
#define QLOGIC_IB_I_TID_MASK 0x7FF
#define QLOGIC_IB_I_TID_SHIFT 13
#define QLOGIC_IB_I_OFFSET_MASK 0x1FFF
#define QLOGIC_IB_I_OFFSET_SHIFT 0
/* K_PktFlags bits */
#define QLOGIC_IB_KPF_INTR 0x1
#define QLOGIC_IB_KPF_SUBCTXT_MASK 0x3
#define QLOGIC_IB_KPF_SUBCTXT_SHIFT 1
#define QLOGIC_IB_MAX_SUBCTXT 4
/* SendPIO per-buffer control */
#define QLOGIC_IB_SP_TEST 0x40
#define QLOGIC_IB_SP_TESTEBP 0x20
#define QLOGIC_IB_SP_TRIGGER_SHIFT 15
/* SendPIOAvail bits */
#define QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT 1
#define QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT 0
/* qlogic_ib header format */
struct qib_header {
/*
* Version - 4 bits, Context - 4 bits, TID - 10 bits and Offset -
* 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
* Context 4, TID 11, offset 13.
*/
__le32 ver_ctxt_tid_offset;
__le16 chksum;
__le16 pkt_flags;
};
/*
* qlogic_ib user message header format.
* This structure contains the first 4 fields common to all protocols
* that employ qlogic_ib.
*/
struct qib_message_header {
__be16 lrh[4];
__be32 bth[3];
/* fields below this point are in host byte order */
struct qib_header iph;
__u8 sub_opcode;
};
/* IB - LRH header consts */
#define QIB_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
#define QIB_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
/* misc. */
#define SIZE_OF_CRC 1
#define QIB_DEFAULT_P_KEY 0xFFFF
#define QIB_PERMISSIVE_LID 0xFFFF
#define QIB_AETH_CREDIT_SHIFT 24
#define QIB_AETH_CREDIT_MASK 0x1F
#define QIB_AETH_CREDIT_INVAL 0x1F
#define QIB_PSN_MASK 0xFFFFFF
#define QIB_MSN_MASK 0xFFFFFF
#define QIB_QPN_MASK 0xFFFFFF
#define QIB_MULTICAST_LID_BASE 0xC000
#define QIB_EAGER_TID_ID QLOGIC_IB_I_TID_MASK
#define QIB_MULTICAST_QPN 0xFFFFFF
/* Receive Header Queue: receive type (from qlogic_ib) */
#define RCVHQ_RCV_TYPE_EXPECTED 0
#define RCVHQ_RCV_TYPE_EAGER 1
#define RCVHQ_RCV_TYPE_NON_KD 2
#define RCVHQ_RCV_TYPE_ERROR 3
#define QIB_HEADER_QUEUE_WORDS 9
/* functions for extracting fields from rcvhdrq entries for the driver.
*/
static inline __u32 qib_hdrget_err_flags(const __le32 *rbuf)
{
return __le32_to_cpu(rbuf[1]) & QLOGIC_IB_RHF_H_ERR_MASK;
}
static inline __u32 qib_hdrget_rcv_type(const __le32 *rbuf)
{
return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_RCVTYPE_SHIFT) &
QLOGIC_IB_RHF_RCVTYPE_MASK;
}
static inline __u32 qib_hdrget_length_in_bytes(const __le32 *rbuf)
{
return ((__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_LENGTH_SHIFT) &
QLOGIC_IB_RHF_LENGTH_MASK) << 2;
}
static inline __u32 qib_hdrget_index(const __le32 *rbuf)
{
return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_EGRINDEX_SHIFT) &
QLOGIC_IB_RHF_EGRINDEX_MASK;
}
static inline __u32 qib_hdrget_seq(const __le32 *rbuf)
{
return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_SEQ_SHIFT) &
QLOGIC_IB_RHF_SEQ_MASK;
}
static inline __u32 qib_hdrget_offset(const __le32 *rbuf)
{
return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT) &
QLOGIC_IB_RHF_HDRQ_OFFSET_MASK;
}
static inline __u32 qib_hdrget_use_egr_buf(const __le32 *rbuf)
{
return __le32_to_cpu(rbuf[0]) & QLOGIC_IB_RHF_L_USE_EGR;
}
static inline __u32 qib_hdrget_qib_ver(__le32 hdrword)
{
return (__le32_to_cpu(hdrword) >> QLOGIC_IB_I_VERS_SHIFT) &
QLOGIC_IB_I_VERS_MASK;
}
#endif /* _QIB_COMMON_H */