mirror of
https://github.com/torvalds/linux.git
synced 2024-12-12 14:12:51 +00:00
10402419f2
All the spi_transfer variables in this file use the name "xfer" except the one in mtk_spi_interrupt(). Align the naming for consistency and easier searching. While at it, reformat one memcpy() usage since the coding style allows 100 column lines today. This commit has no functional change. Signed-off-by: Fei Shao <fshao@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://msgid.link/r/20240321070942.1587146-3-fshao@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
1434 lines
38 KiB
C
1434 lines
38 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2015 MediaTek Inc.
|
|
* Author: Leilk Liu <leilk.liu@mediatek.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/spi-mt65xx.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi-mem.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#define SPI_CFG0_REG 0x0000
|
|
#define SPI_CFG1_REG 0x0004
|
|
#define SPI_TX_SRC_REG 0x0008
|
|
#define SPI_RX_DST_REG 0x000c
|
|
#define SPI_TX_DATA_REG 0x0010
|
|
#define SPI_RX_DATA_REG 0x0014
|
|
#define SPI_CMD_REG 0x0018
|
|
#define SPI_STATUS0_REG 0x001c
|
|
#define SPI_PAD_SEL_REG 0x0024
|
|
#define SPI_CFG2_REG 0x0028
|
|
#define SPI_TX_SRC_REG_64 0x002c
|
|
#define SPI_RX_DST_REG_64 0x0030
|
|
#define SPI_CFG3_IPM_REG 0x0040
|
|
|
|
#define SPI_CFG0_SCK_HIGH_OFFSET 0
|
|
#define SPI_CFG0_SCK_LOW_OFFSET 8
|
|
#define SPI_CFG0_CS_HOLD_OFFSET 16
|
|
#define SPI_CFG0_CS_SETUP_OFFSET 24
|
|
#define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0
|
|
#define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16
|
|
|
|
#define SPI_CFG1_CS_IDLE_OFFSET 0
|
|
#define SPI_CFG1_PACKET_LOOP_OFFSET 8
|
|
#define SPI_CFG1_PACKET_LENGTH_OFFSET 16
|
|
#define SPI_CFG1_GET_TICK_DLY_OFFSET 29
|
|
#define SPI_CFG1_GET_TICK_DLY_OFFSET_V1 30
|
|
|
|
#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000
|
|
#define SPI_CFG1_GET_TICK_DLY_MASK_V1 0xc0000000
|
|
|
|
#define SPI_CFG1_CS_IDLE_MASK 0xff
|
|
#define SPI_CFG1_PACKET_LOOP_MASK 0xff00
|
|
#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000
|
|
#define SPI_CFG1_IPM_PACKET_LENGTH_MASK GENMASK(31, 16)
|
|
#define SPI_CFG2_SCK_HIGH_OFFSET 0
|
|
#define SPI_CFG2_SCK_LOW_OFFSET 16
|
|
|
|
#define SPI_CMD_ACT BIT(0)
|
|
#define SPI_CMD_RESUME BIT(1)
|
|
#define SPI_CMD_RST BIT(2)
|
|
#define SPI_CMD_PAUSE_EN BIT(4)
|
|
#define SPI_CMD_DEASSERT BIT(5)
|
|
#define SPI_CMD_SAMPLE_SEL BIT(6)
|
|
#define SPI_CMD_CS_POL BIT(7)
|
|
#define SPI_CMD_CPHA BIT(8)
|
|
#define SPI_CMD_CPOL BIT(9)
|
|
#define SPI_CMD_RX_DMA BIT(10)
|
|
#define SPI_CMD_TX_DMA BIT(11)
|
|
#define SPI_CMD_TXMSBF BIT(12)
|
|
#define SPI_CMD_RXMSBF BIT(13)
|
|
#define SPI_CMD_RX_ENDIAN BIT(14)
|
|
#define SPI_CMD_TX_ENDIAN BIT(15)
|
|
#define SPI_CMD_FINISH_IE BIT(16)
|
|
#define SPI_CMD_PAUSE_IE BIT(17)
|
|
#define SPI_CMD_IPM_NONIDLE_MODE BIT(19)
|
|
#define SPI_CMD_IPM_SPIM_LOOP BIT(21)
|
|
#define SPI_CMD_IPM_GET_TICKDLY_OFFSET 22
|
|
|
|
#define SPI_CMD_IPM_GET_TICKDLY_MASK GENMASK(24, 22)
|
|
|
|
#define PIN_MODE_CFG(x) ((x) / 2)
|
|
|
|
#define SPI_CFG3_IPM_HALF_DUPLEX_DIR BIT(2)
|
|
#define SPI_CFG3_IPM_HALF_DUPLEX_EN BIT(3)
|
|
#define SPI_CFG3_IPM_XMODE_EN BIT(4)
|
|
#define SPI_CFG3_IPM_NODATA_FLAG BIT(5)
|
|
#define SPI_CFG3_IPM_CMD_BYTELEN_OFFSET 8
|
|
#define SPI_CFG3_IPM_ADDR_BYTELEN_OFFSET 12
|
|
|
|
#define SPI_CFG3_IPM_CMD_PIN_MODE_MASK GENMASK(1, 0)
|
|
#define SPI_CFG3_IPM_CMD_BYTELEN_MASK GENMASK(11, 8)
|
|
#define SPI_CFG3_IPM_ADDR_BYTELEN_MASK GENMASK(15, 12)
|
|
|
|
#define MT8173_SPI_MAX_PAD_SEL 3
|
|
|
|
#define MTK_SPI_PAUSE_INT_STATUS 0x2
|
|
|
|
#define MTK_SPI_MAX_FIFO_SIZE 32U
|
|
#define MTK_SPI_PACKET_SIZE 1024
|
|
#define MTK_SPI_IPM_PACKET_SIZE SZ_64K
|
|
#define MTK_SPI_IPM_PACKET_LOOP SZ_256
|
|
|
|
#define MTK_SPI_IDLE 0
|
|
#define MTK_SPI_PAUSED 1
|
|
|
|
#define MTK_SPI_32BITS_MASK (0xffffffff)
|
|
|
|
#define DMA_ADDR_EXT_BITS (36)
|
|
#define DMA_ADDR_DEF_BITS (32)
|
|
|
|
/**
|
|
* struct mtk_spi_compatible - device data structure
|
|
* @need_pad_sel: Enable pad (pins) selection in SPI controller
|
|
* @must_tx: Must explicitly send dummy TX bytes to do RX only transfer
|
|
* @enhance_timing: Enable adjusting cfg register to enhance time accuracy
|
|
* @dma_ext: DMA address extension supported
|
|
* @no_need_unprepare: Don't unprepare the SPI clk during runtime
|
|
* @ipm_design: Adjust/extend registers to support IPM design IP features
|
|
*/
|
|
struct mtk_spi_compatible {
|
|
bool need_pad_sel;
|
|
bool must_tx;
|
|
bool enhance_timing;
|
|
bool dma_ext;
|
|
bool no_need_unprepare;
|
|
bool ipm_design;
|
|
};
|
|
|
|
/**
|
|
* struct mtk_spi - SPI driver instance
|
|
* @base: Start address of the SPI controller registers
|
|
* @state: SPI controller state
|
|
* @pad_num: Number of pad_sel entries
|
|
* @pad_sel: Groups of pins to select
|
|
* @parent_clk: Parent of sel_clk
|
|
* @sel_clk: SPI host mux clock
|
|
* @spi_clk: Peripheral clock
|
|
* @spi_hclk: AHB bus clock
|
|
* @cur_transfer: Currently processed SPI transfer
|
|
* @xfer_len: Number of bytes to transfer
|
|
* @num_xfered: Number of transferred bytes
|
|
* @tx_sgl: TX transfer scatterlist
|
|
* @rx_sgl: RX transfer scatterlist
|
|
* @tx_sgl_len: Size of TX DMA transfer
|
|
* @rx_sgl_len: Size of RX DMA transfer
|
|
* @dev_comp: Device data structure
|
|
* @spi_clk_hz: Current SPI clock in Hz
|
|
* @spimem_done: SPI-MEM operation completion
|
|
* @use_spimem: Enables SPI-MEM
|
|
* @dev: Device pointer
|
|
* @tx_dma: DMA start for SPI-MEM TX
|
|
* @rx_dma: DMA start for SPI-MEM RX
|
|
*/
|
|
struct mtk_spi {
|
|
void __iomem *base;
|
|
u32 state;
|
|
int pad_num;
|
|
u32 *pad_sel;
|
|
struct clk *parent_clk, *sel_clk, *spi_clk, *spi_hclk;
|
|
struct spi_transfer *cur_transfer;
|
|
u32 xfer_len;
|
|
u32 num_xfered;
|
|
struct scatterlist *tx_sgl, *rx_sgl;
|
|
u32 tx_sgl_len, rx_sgl_len;
|
|
const struct mtk_spi_compatible *dev_comp;
|
|
u32 spi_clk_hz;
|
|
struct completion spimem_done;
|
|
bool use_spimem;
|
|
struct device *dev;
|
|
dma_addr_t tx_dma;
|
|
dma_addr_t rx_dma;
|
|
};
|
|
|
|
static const struct mtk_spi_compatible mtk_common_compat;
|
|
|
|
static const struct mtk_spi_compatible mt2712_compat = {
|
|
.must_tx = true,
|
|
};
|
|
|
|
static const struct mtk_spi_compatible mtk_ipm_compat = {
|
|
.enhance_timing = true,
|
|
.dma_ext = true,
|
|
.ipm_design = true,
|
|
};
|
|
|
|
static const struct mtk_spi_compatible mt6765_compat = {
|
|
.need_pad_sel = true,
|
|
.must_tx = true,
|
|
.enhance_timing = true,
|
|
.dma_ext = true,
|
|
};
|
|
|
|
static const struct mtk_spi_compatible mt7622_compat = {
|
|
.must_tx = true,
|
|
.enhance_timing = true,
|
|
};
|
|
|
|
static const struct mtk_spi_compatible mt8173_compat = {
|
|
.need_pad_sel = true,
|
|
.must_tx = true,
|
|
};
|
|
|
|
static const struct mtk_spi_compatible mt8183_compat = {
|
|
.need_pad_sel = true,
|
|
.must_tx = true,
|
|
.enhance_timing = true,
|
|
};
|
|
|
|
static const struct mtk_spi_compatible mt6893_compat = {
|
|
.need_pad_sel = true,
|
|
.must_tx = true,
|
|
.enhance_timing = true,
|
|
.dma_ext = true,
|
|
.no_need_unprepare = true,
|
|
};
|
|
|
|
/*
|
|
* A piece of default chip info unless the platform
|
|
* supplies it.
|
|
*/
|
|
static const struct mtk_chip_config mtk_default_chip_info = {
|
|
.sample_sel = 0,
|
|
.tick_delay = 0,
|
|
};
|
|
|
|
static const struct of_device_id mtk_spi_of_match[] = {
|
|
{ .compatible = "mediatek,spi-ipm",
|
|
.data = (void *)&mtk_ipm_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt2701-spi",
|
|
.data = (void *)&mtk_common_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt2712-spi",
|
|
.data = (void *)&mt2712_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt6589-spi",
|
|
.data = (void *)&mtk_common_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt6765-spi",
|
|
.data = (void *)&mt6765_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt7622-spi",
|
|
.data = (void *)&mt7622_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt7629-spi",
|
|
.data = (void *)&mt7622_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt8135-spi",
|
|
.data = (void *)&mtk_common_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt8173-spi",
|
|
.data = (void *)&mt8173_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt8183-spi",
|
|
.data = (void *)&mt8183_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt8192-spi",
|
|
.data = (void *)&mt6765_compat,
|
|
},
|
|
{ .compatible = "mediatek,mt6893-spi",
|
|
.data = (void *)&mt6893_compat,
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mtk_spi_of_match);
|
|
|
|
static void mtk_spi_reset(struct mtk_spi *mdata)
|
|
{
|
|
u32 reg_val;
|
|
|
|
/* set the software reset bit in SPI_CMD_REG. */
|
|
reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
reg_val |= SPI_CMD_RST;
|
|
writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
|
|
reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
reg_val &= ~SPI_CMD_RST;
|
|
writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
}
|
|
|
|
static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
|
|
{
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(spi->controller);
|
|
struct spi_delay *cs_setup = &spi->cs_setup;
|
|
struct spi_delay *cs_hold = &spi->cs_hold;
|
|
struct spi_delay *cs_inactive = &spi->cs_inactive;
|
|
u32 setup, hold, inactive;
|
|
u32 reg_val;
|
|
int delay;
|
|
|
|
delay = spi_delay_to_ns(cs_setup, NULL);
|
|
if (delay < 0)
|
|
return delay;
|
|
setup = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
|
|
|
|
delay = spi_delay_to_ns(cs_hold, NULL);
|
|
if (delay < 0)
|
|
return delay;
|
|
hold = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
|
|
|
|
delay = spi_delay_to_ns(cs_inactive, NULL);
|
|
if (delay < 0)
|
|
return delay;
|
|
inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
|
|
|
|
if (hold || setup) {
|
|
reg_val = readl(mdata->base + SPI_CFG0_REG);
|
|
if (mdata->dev_comp->enhance_timing) {
|
|
if (hold) {
|
|
hold = min_t(u32, hold, 0x10000);
|
|
reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
|
|
reg_val |= (((hold - 1) & 0xffff)
|
|
<< SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
|
|
}
|
|
if (setup) {
|
|
setup = min_t(u32, setup, 0x10000);
|
|
reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
|
|
reg_val |= (((setup - 1) & 0xffff)
|
|
<< SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
|
|
}
|
|
} else {
|
|
if (hold) {
|
|
hold = min_t(u32, hold, 0x100);
|
|
reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
|
|
reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
|
|
}
|
|
if (setup) {
|
|
setup = min_t(u32, setup, 0x100);
|
|
reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
|
|
reg_val |= (((setup - 1) & 0xff)
|
|
<< SPI_CFG0_CS_SETUP_OFFSET);
|
|
}
|
|
}
|
|
writel(reg_val, mdata->base + SPI_CFG0_REG);
|
|
}
|
|
|
|
if (inactive) {
|
|
inactive = min_t(u32, inactive, 0x100);
|
|
reg_val = readl(mdata->base + SPI_CFG1_REG);
|
|
reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
|
|
reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
|
|
writel(reg_val, mdata->base + SPI_CFG1_REG);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_spi_hw_init(struct spi_controller *host,
|
|
struct spi_device *spi)
|
|
{
|
|
u16 cpha, cpol;
|
|
u32 reg_val;
|
|
struct mtk_chip_config *chip_config = spi->controller_data;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
cpha = spi->mode & SPI_CPHA ? 1 : 0;
|
|
cpol = spi->mode & SPI_CPOL ? 1 : 0;
|
|
|
|
reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
if (mdata->dev_comp->ipm_design) {
|
|
/* SPI transfer without idle time until packet length done */
|
|
reg_val |= SPI_CMD_IPM_NONIDLE_MODE;
|
|
if (spi->mode & SPI_LOOP)
|
|
reg_val |= SPI_CMD_IPM_SPIM_LOOP;
|
|
else
|
|
reg_val &= ~SPI_CMD_IPM_SPIM_LOOP;
|
|
}
|
|
|
|
if (cpha)
|
|
reg_val |= SPI_CMD_CPHA;
|
|
else
|
|
reg_val &= ~SPI_CMD_CPHA;
|
|
if (cpol)
|
|
reg_val |= SPI_CMD_CPOL;
|
|
else
|
|
reg_val &= ~SPI_CMD_CPOL;
|
|
|
|
/* set the mlsbx and mlsbtx */
|
|
if (spi->mode & SPI_LSB_FIRST) {
|
|
reg_val &= ~SPI_CMD_TXMSBF;
|
|
reg_val &= ~SPI_CMD_RXMSBF;
|
|
} else {
|
|
reg_val |= SPI_CMD_TXMSBF;
|
|
reg_val |= SPI_CMD_RXMSBF;
|
|
}
|
|
|
|
/* set the tx/rx endian */
|
|
#ifdef __LITTLE_ENDIAN
|
|
reg_val &= ~SPI_CMD_TX_ENDIAN;
|
|
reg_val &= ~SPI_CMD_RX_ENDIAN;
|
|
#else
|
|
reg_val |= SPI_CMD_TX_ENDIAN;
|
|
reg_val |= SPI_CMD_RX_ENDIAN;
|
|
#endif
|
|
|
|
if (mdata->dev_comp->enhance_timing) {
|
|
/* set CS polarity */
|
|
if (spi->mode & SPI_CS_HIGH)
|
|
reg_val |= SPI_CMD_CS_POL;
|
|
else
|
|
reg_val &= ~SPI_CMD_CS_POL;
|
|
|
|
if (chip_config->sample_sel)
|
|
reg_val |= SPI_CMD_SAMPLE_SEL;
|
|
else
|
|
reg_val &= ~SPI_CMD_SAMPLE_SEL;
|
|
}
|
|
|
|
/* set finish and pause interrupt always enable */
|
|
reg_val |= SPI_CMD_FINISH_IE | SPI_CMD_PAUSE_IE;
|
|
|
|
/* disable dma mode */
|
|
reg_val &= ~(SPI_CMD_TX_DMA | SPI_CMD_RX_DMA);
|
|
|
|
/* disable deassert mode */
|
|
reg_val &= ~SPI_CMD_DEASSERT;
|
|
|
|
writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
|
|
/* pad select */
|
|
if (mdata->dev_comp->need_pad_sel)
|
|
writel(mdata->pad_sel[spi_get_chipselect(spi, 0)],
|
|
mdata->base + SPI_PAD_SEL_REG);
|
|
|
|
/* tick delay */
|
|
if (mdata->dev_comp->enhance_timing) {
|
|
if (mdata->dev_comp->ipm_design) {
|
|
reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
reg_val &= ~SPI_CMD_IPM_GET_TICKDLY_MASK;
|
|
reg_val |= ((chip_config->tick_delay & 0x7)
|
|
<< SPI_CMD_IPM_GET_TICKDLY_OFFSET);
|
|
writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
} else {
|
|
reg_val = readl(mdata->base + SPI_CFG1_REG);
|
|
reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK;
|
|
reg_val |= ((chip_config->tick_delay & 0x7)
|
|
<< SPI_CFG1_GET_TICK_DLY_OFFSET);
|
|
writel(reg_val, mdata->base + SPI_CFG1_REG);
|
|
}
|
|
} else {
|
|
reg_val = readl(mdata->base + SPI_CFG1_REG);
|
|
reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK_V1;
|
|
reg_val |= ((chip_config->tick_delay & 0x3)
|
|
<< SPI_CFG1_GET_TICK_DLY_OFFSET_V1);
|
|
writel(reg_val, mdata->base + SPI_CFG1_REG);
|
|
}
|
|
|
|
/* set hw cs timing */
|
|
mtk_spi_set_hw_cs_timing(spi);
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_spi_prepare_message(struct spi_controller *host,
|
|
struct spi_message *msg)
|
|
{
|
|
return mtk_spi_hw_init(host, msg->spi);
|
|
}
|
|
|
|
static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
|
|
{
|
|
u32 reg_val;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(spi->controller);
|
|
|
|
if (spi->mode & SPI_CS_HIGH)
|
|
enable = !enable;
|
|
|
|
reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
if (!enable) {
|
|
reg_val |= SPI_CMD_PAUSE_EN;
|
|
writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
} else {
|
|
reg_val &= ~SPI_CMD_PAUSE_EN;
|
|
writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
mdata->state = MTK_SPI_IDLE;
|
|
mtk_spi_reset(mdata);
|
|
}
|
|
}
|
|
|
|
static void mtk_spi_prepare_transfer(struct spi_controller *host,
|
|
u32 speed_hz)
|
|
{
|
|
u32 div, sck_time, reg_val;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
if (speed_hz < mdata->spi_clk_hz / 2)
|
|
div = DIV_ROUND_UP(mdata->spi_clk_hz, speed_hz);
|
|
else
|
|
div = 1;
|
|
|
|
sck_time = (div + 1) / 2;
|
|
|
|
if (mdata->dev_comp->enhance_timing) {
|
|
reg_val = readl(mdata->base + SPI_CFG2_REG);
|
|
reg_val &= ~(0xffff << SPI_CFG2_SCK_HIGH_OFFSET);
|
|
reg_val |= (((sck_time - 1) & 0xffff)
|
|
<< SPI_CFG2_SCK_HIGH_OFFSET);
|
|
reg_val &= ~(0xffff << SPI_CFG2_SCK_LOW_OFFSET);
|
|
reg_val |= (((sck_time - 1) & 0xffff)
|
|
<< SPI_CFG2_SCK_LOW_OFFSET);
|
|
writel(reg_val, mdata->base + SPI_CFG2_REG);
|
|
} else {
|
|
reg_val = readl(mdata->base + SPI_CFG0_REG);
|
|
reg_val &= ~(0xff << SPI_CFG0_SCK_HIGH_OFFSET);
|
|
reg_val |= (((sck_time - 1) & 0xff)
|
|
<< SPI_CFG0_SCK_HIGH_OFFSET);
|
|
reg_val &= ~(0xff << SPI_CFG0_SCK_LOW_OFFSET);
|
|
reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET);
|
|
writel(reg_val, mdata->base + SPI_CFG0_REG);
|
|
}
|
|
}
|
|
|
|
static void mtk_spi_setup_packet(struct spi_controller *host)
|
|
{
|
|
u32 packet_size, packet_loop, reg_val;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
if (mdata->dev_comp->ipm_design)
|
|
packet_size = min_t(u32,
|
|
mdata->xfer_len,
|
|
MTK_SPI_IPM_PACKET_SIZE);
|
|
else
|
|
packet_size = min_t(u32,
|
|
mdata->xfer_len,
|
|
MTK_SPI_PACKET_SIZE);
|
|
|
|
packet_loop = mdata->xfer_len / packet_size;
|
|
|
|
reg_val = readl(mdata->base + SPI_CFG1_REG);
|
|
if (mdata->dev_comp->ipm_design)
|
|
reg_val &= ~SPI_CFG1_IPM_PACKET_LENGTH_MASK;
|
|
else
|
|
reg_val &= ~SPI_CFG1_PACKET_LENGTH_MASK;
|
|
reg_val |= (packet_size - 1) << SPI_CFG1_PACKET_LENGTH_OFFSET;
|
|
reg_val &= ~SPI_CFG1_PACKET_LOOP_MASK;
|
|
reg_val |= (packet_loop - 1) << SPI_CFG1_PACKET_LOOP_OFFSET;
|
|
writel(reg_val, mdata->base + SPI_CFG1_REG);
|
|
}
|
|
|
|
static void mtk_spi_enable_transfer(struct spi_controller *host)
|
|
{
|
|
u32 cmd;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
cmd = readl(mdata->base + SPI_CMD_REG);
|
|
if (mdata->state == MTK_SPI_IDLE)
|
|
cmd |= SPI_CMD_ACT;
|
|
else
|
|
cmd |= SPI_CMD_RESUME;
|
|
writel(cmd, mdata->base + SPI_CMD_REG);
|
|
}
|
|
|
|
static int mtk_spi_get_mult_delta(struct mtk_spi *mdata, u32 xfer_len)
|
|
{
|
|
u32 mult_delta = 0;
|
|
|
|
if (mdata->dev_comp->ipm_design) {
|
|
if (xfer_len > MTK_SPI_IPM_PACKET_SIZE)
|
|
mult_delta = xfer_len % MTK_SPI_IPM_PACKET_SIZE;
|
|
} else {
|
|
if (xfer_len > MTK_SPI_PACKET_SIZE)
|
|
mult_delta = xfer_len % MTK_SPI_PACKET_SIZE;
|
|
}
|
|
|
|
return mult_delta;
|
|
}
|
|
|
|
static void mtk_spi_update_mdata_len(struct spi_controller *host)
|
|
{
|
|
int mult_delta;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
if (mdata->tx_sgl_len && mdata->rx_sgl_len) {
|
|
if (mdata->tx_sgl_len > mdata->rx_sgl_len) {
|
|
mult_delta = mtk_spi_get_mult_delta(mdata, mdata->rx_sgl_len);
|
|
mdata->xfer_len = mdata->rx_sgl_len - mult_delta;
|
|
mdata->rx_sgl_len = mult_delta;
|
|
mdata->tx_sgl_len -= mdata->xfer_len;
|
|
} else {
|
|
mult_delta = mtk_spi_get_mult_delta(mdata, mdata->tx_sgl_len);
|
|
mdata->xfer_len = mdata->tx_sgl_len - mult_delta;
|
|
mdata->tx_sgl_len = mult_delta;
|
|
mdata->rx_sgl_len -= mdata->xfer_len;
|
|
}
|
|
} else if (mdata->tx_sgl_len) {
|
|
mult_delta = mtk_spi_get_mult_delta(mdata, mdata->tx_sgl_len);
|
|
mdata->xfer_len = mdata->tx_sgl_len - mult_delta;
|
|
mdata->tx_sgl_len = mult_delta;
|
|
} else if (mdata->rx_sgl_len) {
|
|
mult_delta = mtk_spi_get_mult_delta(mdata, mdata->rx_sgl_len);
|
|
mdata->xfer_len = mdata->rx_sgl_len - mult_delta;
|
|
mdata->rx_sgl_len = mult_delta;
|
|
}
|
|
}
|
|
|
|
static void mtk_spi_setup_dma_addr(struct spi_controller *host,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
if (mdata->tx_sgl) {
|
|
writel((u32)(xfer->tx_dma & MTK_SPI_32BITS_MASK),
|
|
mdata->base + SPI_TX_SRC_REG);
|
|
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
|
|
if (mdata->dev_comp->dma_ext)
|
|
writel((u32)(xfer->tx_dma >> 32),
|
|
mdata->base + SPI_TX_SRC_REG_64);
|
|
#endif
|
|
}
|
|
|
|
if (mdata->rx_sgl) {
|
|
writel((u32)(xfer->rx_dma & MTK_SPI_32BITS_MASK),
|
|
mdata->base + SPI_RX_DST_REG);
|
|
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
|
|
if (mdata->dev_comp->dma_ext)
|
|
writel((u32)(xfer->rx_dma >> 32),
|
|
mdata->base + SPI_RX_DST_REG_64);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static int mtk_spi_fifo_transfer(struct spi_controller *host,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
int cnt, remainder;
|
|
u32 reg_val;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
mdata->cur_transfer = xfer;
|
|
mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, xfer->len);
|
|
mdata->num_xfered = 0;
|
|
mtk_spi_prepare_transfer(host, xfer->speed_hz);
|
|
mtk_spi_setup_packet(host);
|
|
|
|
if (xfer->tx_buf) {
|
|
cnt = xfer->len / 4;
|
|
iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
|
|
remainder = xfer->len % 4;
|
|
if (remainder > 0) {
|
|
reg_val = 0;
|
|
memcpy(®_val, xfer->tx_buf + (cnt * 4), remainder);
|
|
writel(reg_val, mdata->base + SPI_TX_DATA_REG);
|
|
}
|
|
}
|
|
|
|
mtk_spi_enable_transfer(host);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int mtk_spi_dma_transfer(struct spi_controller *host,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
int cmd;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
mdata->tx_sgl = NULL;
|
|
mdata->rx_sgl = NULL;
|
|
mdata->tx_sgl_len = 0;
|
|
mdata->rx_sgl_len = 0;
|
|
mdata->cur_transfer = xfer;
|
|
mdata->num_xfered = 0;
|
|
|
|
mtk_spi_prepare_transfer(host, xfer->speed_hz);
|
|
|
|
cmd = readl(mdata->base + SPI_CMD_REG);
|
|
if (xfer->tx_buf)
|
|
cmd |= SPI_CMD_TX_DMA;
|
|
if (xfer->rx_buf)
|
|
cmd |= SPI_CMD_RX_DMA;
|
|
writel(cmd, mdata->base + SPI_CMD_REG);
|
|
|
|
if (xfer->tx_buf)
|
|
mdata->tx_sgl = xfer->tx_sg.sgl;
|
|
if (xfer->rx_buf)
|
|
mdata->rx_sgl = xfer->rx_sg.sgl;
|
|
|
|
if (mdata->tx_sgl) {
|
|
xfer->tx_dma = sg_dma_address(mdata->tx_sgl);
|
|
mdata->tx_sgl_len = sg_dma_len(mdata->tx_sgl);
|
|
}
|
|
if (mdata->rx_sgl) {
|
|
xfer->rx_dma = sg_dma_address(mdata->rx_sgl);
|
|
mdata->rx_sgl_len = sg_dma_len(mdata->rx_sgl);
|
|
}
|
|
|
|
mtk_spi_update_mdata_len(host);
|
|
mtk_spi_setup_packet(host);
|
|
mtk_spi_setup_dma_addr(host, xfer);
|
|
mtk_spi_enable_transfer(host);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int mtk_spi_transfer_one(struct spi_controller *host,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(spi->controller);
|
|
u32 reg_val = 0;
|
|
|
|
/* prepare xfer direction and duplex mode */
|
|
if (mdata->dev_comp->ipm_design) {
|
|
if (!xfer->tx_buf || !xfer->rx_buf) {
|
|
reg_val |= SPI_CFG3_IPM_HALF_DUPLEX_EN;
|
|
if (xfer->rx_buf)
|
|
reg_val |= SPI_CFG3_IPM_HALF_DUPLEX_DIR;
|
|
}
|
|
writel(reg_val, mdata->base + SPI_CFG3_IPM_REG);
|
|
}
|
|
|
|
if (host->can_dma(host, spi, xfer))
|
|
return mtk_spi_dma_transfer(host, spi, xfer);
|
|
else
|
|
return mtk_spi_fifo_transfer(host, spi, xfer);
|
|
}
|
|
|
|
static bool mtk_spi_can_dma(struct spi_controller *host,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
/* Buffers for DMA transactions must be 4-byte aligned */
|
|
return (xfer->len > MTK_SPI_MAX_FIFO_SIZE &&
|
|
(unsigned long)xfer->tx_buf % 4 == 0 &&
|
|
(unsigned long)xfer->rx_buf % 4 == 0);
|
|
}
|
|
|
|
static int mtk_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(spi->controller);
|
|
|
|
if (!spi->controller_data)
|
|
spi->controller_data = (void *)&mtk_default_chip_info;
|
|
|
|
if (mdata->dev_comp->need_pad_sel && spi_get_csgpiod(spi, 0))
|
|
/* CS de-asserted, gpiolib will handle inversion */
|
|
gpiod_direction_output(spi_get_csgpiod(spi, 0), 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
|
|
{
|
|
u32 cmd, reg_val, cnt, remainder, len;
|
|
struct spi_controller *host = dev_id;
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
struct spi_transfer *xfer = mdata->cur_transfer;
|
|
|
|
reg_val = readl(mdata->base + SPI_STATUS0_REG);
|
|
if (reg_val & MTK_SPI_PAUSE_INT_STATUS)
|
|
mdata->state = MTK_SPI_PAUSED;
|
|
else
|
|
mdata->state = MTK_SPI_IDLE;
|
|
|
|
/* SPI-MEM ops */
|
|
if (mdata->use_spimem) {
|
|
complete(&mdata->spimem_done);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (!host->can_dma(host, NULL, xfer)) {
|
|
if (xfer->rx_buf) {
|
|
cnt = mdata->xfer_len / 4;
|
|
ioread32_rep(mdata->base + SPI_RX_DATA_REG,
|
|
xfer->rx_buf + mdata->num_xfered, cnt);
|
|
remainder = mdata->xfer_len % 4;
|
|
if (remainder > 0) {
|
|
reg_val = readl(mdata->base + SPI_RX_DATA_REG);
|
|
memcpy(xfer->rx_buf + (cnt * 4) + mdata->num_xfered,
|
|
®_val,
|
|
remainder);
|
|
}
|
|
}
|
|
|
|
mdata->num_xfered += mdata->xfer_len;
|
|
if (mdata->num_xfered == xfer->len) {
|
|
spi_finalize_current_transfer(host);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
len = xfer->len - mdata->num_xfered;
|
|
mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
|
|
mtk_spi_setup_packet(host);
|
|
|
|
if (xfer->tx_buf) {
|
|
cnt = mdata->xfer_len / 4;
|
|
iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
|
|
xfer->tx_buf + mdata->num_xfered, cnt);
|
|
|
|
remainder = mdata->xfer_len % 4;
|
|
if (remainder > 0) {
|
|
reg_val = 0;
|
|
memcpy(®_val,
|
|
xfer->tx_buf + (cnt * 4) + mdata->num_xfered,
|
|
remainder);
|
|
writel(reg_val, mdata->base + SPI_TX_DATA_REG);
|
|
}
|
|
}
|
|
|
|
mtk_spi_enable_transfer(host);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (mdata->tx_sgl)
|
|
xfer->tx_dma += mdata->xfer_len;
|
|
if (mdata->rx_sgl)
|
|
xfer->rx_dma += mdata->xfer_len;
|
|
|
|
if (mdata->tx_sgl && (mdata->tx_sgl_len == 0)) {
|
|
mdata->tx_sgl = sg_next(mdata->tx_sgl);
|
|
if (mdata->tx_sgl) {
|
|
xfer->tx_dma = sg_dma_address(mdata->tx_sgl);
|
|
mdata->tx_sgl_len = sg_dma_len(mdata->tx_sgl);
|
|
}
|
|
}
|
|
if (mdata->rx_sgl && (mdata->rx_sgl_len == 0)) {
|
|
mdata->rx_sgl = sg_next(mdata->rx_sgl);
|
|
if (mdata->rx_sgl) {
|
|
xfer->rx_dma = sg_dma_address(mdata->rx_sgl);
|
|
mdata->rx_sgl_len = sg_dma_len(mdata->rx_sgl);
|
|
}
|
|
}
|
|
|
|
if (!mdata->tx_sgl && !mdata->rx_sgl) {
|
|
/* spi disable dma */
|
|
cmd = readl(mdata->base + SPI_CMD_REG);
|
|
cmd &= ~SPI_CMD_TX_DMA;
|
|
cmd &= ~SPI_CMD_RX_DMA;
|
|
writel(cmd, mdata->base + SPI_CMD_REG);
|
|
|
|
spi_finalize_current_transfer(host);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
mtk_spi_update_mdata_len(host);
|
|
mtk_spi_setup_packet(host);
|
|
mtk_spi_setup_dma_addr(host, xfer);
|
|
mtk_spi_enable_transfer(host);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mtk_spi_mem_adjust_op_size(struct spi_mem *mem,
|
|
struct spi_mem_op *op)
|
|
{
|
|
int opcode_len;
|
|
|
|
if (op->data.dir != SPI_MEM_NO_DATA) {
|
|
opcode_len = 1 + op->addr.nbytes + op->dummy.nbytes;
|
|
if (opcode_len + op->data.nbytes > MTK_SPI_IPM_PACKET_SIZE) {
|
|
op->data.nbytes = MTK_SPI_IPM_PACKET_SIZE - opcode_len;
|
|
/* force data buffer dma-aligned. */
|
|
op->data.nbytes -= op->data.nbytes % 4;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool mtk_spi_mem_supports_op(struct spi_mem *mem,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
if (!spi_mem_default_supports_op(mem, op))
|
|
return false;
|
|
|
|
if (op->addr.nbytes && op->dummy.nbytes &&
|
|
op->addr.buswidth != op->dummy.buswidth)
|
|
return false;
|
|
|
|
if (op->addr.nbytes + op->dummy.nbytes > 16)
|
|
return false;
|
|
|
|
if (op->data.nbytes > MTK_SPI_IPM_PACKET_SIZE) {
|
|
if (op->data.nbytes / MTK_SPI_IPM_PACKET_SIZE >
|
|
MTK_SPI_IPM_PACKET_LOOP ||
|
|
op->data.nbytes % MTK_SPI_IPM_PACKET_SIZE != 0)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void mtk_spi_mem_setup_dma_xfer(struct spi_controller *host,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
writel((u32)(mdata->tx_dma & MTK_SPI_32BITS_MASK),
|
|
mdata->base + SPI_TX_SRC_REG);
|
|
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
|
|
if (mdata->dev_comp->dma_ext)
|
|
writel((u32)(mdata->tx_dma >> 32),
|
|
mdata->base + SPI_TX_SRC_REG_64);
|
|
#endif
|
|
|
|
if (op->data.dir == SPI_MEM_DATA_IN) {
|
|
writel((u32)(mdata->rx_dma & MTK_SPI_32BITS_MASK),
|
|
mdata->base + SPI_RX_DST_REG);
|
|
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
|
|
if (mdata->dev_comp->dma_ext)
|
|
writel((u32)(mdata->rx_dma >> 32),
|
|
mdata->base + SPI_RX_DST_REG_64);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static int mtk_spi_transfer_wait(struct spi_mem *mem,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(mem->spi->controller);
|
|
/*
|
|
* For each byte we wait for 8 cycles of the SPI clock.
|
|
* Since speed is defined in Hz and we want milliseconds,
|
|
* so it should be 8 * 1000.
|
|
*/
|
|
u64 ms = 8000LL;
|
|
|
|
if (op->data.dir == SPI_MEM_NO_DATA)
|
|
ms *= 32; /* prevent we may get 0 for short transfers. */
|
|
else
|
|
ms *= op->data.nbytes;
|
|
ms = div_u64(ms, mem->spi->max_speed_hz);
|
|
ms += ms + 1000; /* 1s tolerance */
|
|
|
|
if (ms > UINT_MAX)
|
|
ms = UINT_MAX;
|
|
|
|
if (!wait_for_completion_timeout(&mdata->spimem_done,
|
|
msecs_to_jiffies(ms))) {
|
|
dev_err(mdata->dev, "spi-mem transfer timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_spi_mem_exec_op(struct spi_mem *mem,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(mem->spi->controller);
|
|
u32 reg_val, nio, tx_size;
|
|
char *tx_tmp_buf, *rx_tmp_buf;
|
|
int ret = 0;
|
|
|
|
mdata->use_spimem = true;
|
|
reinit_completion(&mdata->spimem_done);
|
|
|
|
mtk_spi_reset(mdata);
|
|
mtk_spi_hw_init(mem->spi->controller, mem->spi);
|
|
mtk_spi_prepare_transfer(mem->spi->controller, mem->spi->max_speed_hz);
|
|
|
|
reg_val = readl(mdata->base + SPI_CFG3_IPM_REG);
|
|
/* opcode byte len */
|
|
reg_val &= ~SPI_CFG3_IPM_CMD_BYTELEN_MASK;
|
|
reg_val |= 1 << SPI_CFG3_IPM_CMD_BYTELEN_OFFSET;
|
|
|
|
/* addr & dummy byte len */
|
|
reg_val &= ~SPI_CFG3_IPM_ADDR_BYTELEN_MASK;
|
|
if (op->addr.nbytes || op->dummy.nbytes)
|
|
reg_val |= (op->addr.nbytes + op->dummy.nbytes) <<
|
|
SPI_CFG3_IPM_ADDR_BYTELEN_OFFSET;
|
|
|
|
/* data byte len */
|
|
if (op->data.dir == SPI_MEM_NO_DATA) {
|
|
reg_val |= SPI_CFG3_IPM_NODATA_FLAG;
|
|
writel(0, mdata->base + SPI_CFG1_REG);
|
|
} else {
|
|
reg_val &= ~SPI_CFG3_IPM_NODATA_FLAG;
|
|
mdata->xfer_len = op->data.nbytes;
|
|
mtk_spi_setup_packet(mem->spi->controller);
|
|
}
|
|
|
|
if (op->addr.nbytes || op->dummy.nbytes) {
|
|
if (op->addr.buswidth == 1 || op->dummy.buswidth == 1)
|
|
reg_val |= SPI_CFG3_IPM_XMODE_EN;
|
|
else
|
|
reg_val &= ~SPI_CFG3_IPM_XMODE_EN;
|
|
}
|
|
|
|
if (op->addr.buswidth == 2 ||
|
|
op->dummy.buswidth == 2 ||
|
|
op->data.buswidth == 2)
|
|
nio = 2;
|
|
else if (op->addr.buswidth == 4 ||
|
|
op->dummy.buswidth == 4 ||
|
|
op->data.buswidth == 4)
|
|
nio = 4;
|
|
else
|
|
nio = 1;
|
|
|
|
reg_val &= ~SPI_CFG3_IPM_CMD_PIN_MODE_MASK;
|
|
reg_val |= PIN_MODE_CFG(nio);
|
|
|
|
reg_val |= SPI_CFG3_IPM_HALF_DUPLEX_EN;
|
|
if (op->data.dir == SPI_MEM_DATA_IN)
|
|
reg_val |= SPI_CFG3_IPM_HALF_DUPLEX_DIR;
|
|
else
|
|
reg_val &= ~SPI_CFG3_IPM_HALF_DUPLEX_DIR;
|
|
writel(reg_val, mdata->base + SPI_CFG3_IPM_REG);
|
|
|
|
tx_size = 1 + op->addr.nbytes + op->dummy.nbytes;
|
|
if (op->data.dir == SPI_MEM_DATA_OUT)
|
|
tx_size += op->data.nbytes;
|
|
|
|
tx_size = max_t(u32, tx_size, 32);
|
|
|
|
tx_tmp_buf = kzalloc(tx_size, GFP_KERNEL | GFP_DMA);
|
|
if (!tx_tmp_buf) {
|
|
mdata->use_spimem = false;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
tx_tmp_buf[0] = op->cmd.opcode;
|
|
|
|
if (op->addr.nbytes) {
|
|
int i;
|
|
|
|
for (i = 0; i < op->addr.nbytes; i++)
|
|
tx_tmp_buf[i + 1] = op->addr.val >>
|
|
(8 * (op->addr.nbytes - i - 1));
|
|
}
|
|
|
|
if (op->dummy.nbytes)
|
|
memset(tx_tmp_buf + op->addr.nbytes + 1,
|
|
0xff,
|
|
op->dummy.nbytes);
|
|
|
|
if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT)
|
|
memcpy(tx_tmp_buf + op->dummy.nbytes + op->addr.nbytes + 1,
|
|
op->data.buf.out,
|
|
op->data.nbytes);
|
|
|
|
mdata->tx_dma = dma_map_single(mdata->dev, tx_tmp_buf,
|
|
tx_size, DMA_TO_DEVICE);
|
|
if (dma_mapping_error(mdata->dev, mdata->tx_dma)) {
|
|
ret = -ENOMEM;
|
|
goto err_exit;
|
|
}
|
|
|
|
if (op->data.dir == SPI_MEM_DATA_IN) {
|
|
if (!IS_ALIGNED((size_t)op->data.buf.in, 4)) {
|
|
rx_tmp_buf = kzalloc(op->data.nbytes,
|
|
GFP_KERNEL | GFP_DMA);
|
|
if (!rx_tmp_buf) {
|
|
ret = -ENOMEM;
|
|
goto unmap_tx_dma;
|
|
}
|
|
} else {
|
|
rx_tmp_buf = op->data.buf.in;
|
|
}
|
|
|
|
mdata->rx_dma = dma_map_single(mdata->dev,
|
|
rx_tmp_buf,
|
|
op->data.nbytes,
|
|
DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(mdata->dev, mdata->rx_dma)) {
|
|
ret = -ENOMEM;
|
|
goto kfree_rx_tmp_buf;
|
|
}
|
|
}
|
|
|
|
reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
reg_val |= SPI_CMD_TX_DMA;
|
|
if (op->data.dir == SPI_MEM_DATA_IN)
|
|
reg_val |= SPI_CMD_RX_DMA;
|
|
writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
|
|
mtk_spi_mem_setup_dma_xfer(mem->spi->controller, op);
|
|
|
|
mtk_spi_enable_transfer(mem->spi->controller);
|
|
|
|
/* Wait for the interrupt. */
|
|
ret = mtk_spi_transfer_wait(mem, op);
|
|
if (ret)
|
|
goto unmap_rx_dma;
|
|
|
|
/* spi disable dma */
|
|
reg_val = readl(mdata->base + SPI_CMD_REG);
|
|
reg_val &= ~SPI_CMD_TX_DMA;
|
|
if (op->data.dir == SPI_MEM_DATA_IN)
|
|
reg_val &= ~SPI_CMD_RX_DMA;
|
|
writel(reg_val, mdata->base + SPI_CMD_REG);
|
|
|
|
unmap_rx_dma:
|
|
if (op->data.dir == SPI_MEM_DATA_IN) {
|
|
dma_unmap_single(mdata->dev, mdata->rx_dma,
|
|
op->data.nbytes, DMA_FROM_DEVICE);
|
|
if (!IS_ALIGNED((size_t)op->data.buf.in, 4))
|
|
memcpy(op->data.buf.in, rx_tmp_buf, op->data.nbytes);
|
|
}
|
|
kfree_rx_tmp_buf:
|
|
if (op->data.dir == SPI_MEM_DATA_IN &&
|
|
!IS_ALIGNED((size_t)op->data.buf.in, 4))
|
|
kfree(rx_tmp_buf);
|
|
unmap_tx_dma:
|
|
dma_unmap_single(mdata->dev, mdata->tx_dma,
|
|
tx_size, DMA_TO_DEVICE);
|
|
err_exit:
|
|
kfree(tx_tmp_buf);
|
|
mdata->use_spimem = false;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct spi_controller_mem_ops mtk_spi_mem_ops = {
|
|
.adjust_op_size = mtk_spi_mem_adjust_op_size,
|
|
.supports_op = mtk_spi_mem_supports_op,
|
|
.exec_op = mtk_spi_mem_exec_op,
|
|
};
|
|
|
|
static int mtk_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct spi_controller *host;
|
|
struct mtk_spi *mdata;
|
|
int i, irq, ret, addr_bits;
|
|
|
|
host = devm_spi_alloc_host(dev, sizeof(*mdata));
|
|
if (!host)
|
|
return dev_err_probe(dev, -ENOMEM, "failed to alloc spi host\n");
|
|
|
|
host->auto_runtime_pm = true;
|
|
host->dev.of_node = dev->of_node;
|
|
host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
|
|
|
|
host->set_cs = mtk_spi_set_cs;
|
|
host->prepare_message = mtk_spi_prepare_message;
|
|
host->transfer_one = mtk_spi_transfer_one;
|
|
host->can_dma = mtk_spi_can_dma;
|
|
host->setup = mtk_spi_setup;
|
|
host->set_cs_timing = mtk_spi_set_hw_cs_timing;
|
|
host->use_gpio_descriptors = true;
|
|
|
|
mdata = spi_controller_get_devdata(host);
|
|
mdata->dev_comp = device_get_match_data(dev);
|
|
|
|
if (mdata->dev_comp->enhance_timing)
|
|
host->mode_bits |= SPI_CS_HIGH;
|
|
|
|
if (mdata->dev_comp->must_tx)
|
|
host->flags = SPI_CONTROLLER_MUST_TX;
|
|
if (mdata->dev_comp->ipm_design)
|
|
host->mode_bits |= SPI_LOOP | SPI_RX_DUAL | SPI_TX_DUAL |
|
|
SPI_RX_QUAD | SPI_TX_QUAD;
|
|
|
|
if (mdata->dev_comp->ipm_design) {
|
|
mdata->dev = dev;
|
|
host->mem_ops = &mtk_spi_mem_ops;
|
|
init_completion(&mdata->spimem_done);
|
|
}
|
|
|
|
if (mdata->dev_comp->need_pad_sel) {
|
|
mdata->pad_num = of_property_count_u32_elems(dev->of_node,
|
|
"mediatek,pad-select");
|
|
if (mdata->pad_num < 0)
|
|
return dev_err_probe(dev, -EINVAL,
|
|
"No 'mediatek,pad-select' property\n");
|
|
|
|
mdata->pad_sel = devm_kmalloc_array(dev, mdata->pad_num,
|
|
sizeof(u32), GFP_KERNEL);
|
|
if (!mdata->pad_sel)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < mdata->pad_num; i++) {
|
|
of_property_read_u32_index(dev->of_node,
|
|
"mediatek,pad-select",
|
|
i, &mdata->pad_sel[i]);
|
|
if (mdata->pad_sel[i] > MT8173_SPI_MAX_PAD_SEL)
|
|
return dev_err_probe(dev, -EINVAL,
|
|
"wrong pad-sel[%d]: %u\n",
|
|
i, mdata->pad_sel[i]);
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
mdata->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(mdata->base))
|
|
return PTR_ERR(mdata->base);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
if (!dev->dma_mask)
|
|
dev->dma_mask = &dev->coherent_dma_mask;
|
|
|
|
if (mdata->dev_comp->ipm_design)
|
|
dma_set_max_seg_size(dev, SZ_16M);
|
|
else
|
|
dma_set_max_seg_size(dev, SZ_256K);
|
|
|
|
mdata->parent_clk = devm_clk_get(dev, "parent-clk");
|
|
if (IS_ERR(mdata->parent_clk))
|
|
return dev_err_probe(dev, PTR_ERR(mdata->parent_clk),
|
|
"failed to get parent-clk\n");
|
|
|
|
mdata->sel_clk = devm_clk_get(dev, "sel-clk");
|
|
if (IS_ERR(mdata->sel_clk))
|
|
return dev_err_probe(dev, PTR_ERR(mdata->sel_clk), "failed to get sel-clk\n");
|
|
|
|
mdata->spi_clk = devm_clk_get(dev, "spi-clk");
|
|
if (IS_ERR(mdata->spi_clk))
|
|
return dev_err_probe(dev, PTR_ERR(mdata->spi_clk), "failed to get spi-clk\n");
|
|
|
|
mdata->spi_hclk = devm_clk_get_optional(dev, "hclk");
|
|
if (IS_ERR(mdata->spi_hclk))
|
|
return dev_err_probe(dev, PTR_ERR(mdata->spi_hclk), "failed to get hclk\n");
|
|
|
|
ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
|
|
if (ret < 0)
|
|
return dev_err_probe(dev, ret, "failed to clk_set_parent\n");
|
|
|
|
ret = clk_prepare_enable(mdata->spi_hclk);
|
|
if (ret < 0)
|
|
return dev_err_probe(dev, ret, "failed to enable hclk\n");
|
|
|
|
ret = clk_prepare_enable(mdata->spi_clk);
|
|
if (ret < 0) {
|
|
clk_disable_unprepare(mdata->spi_hclk);
|
|
return dev_err_probe(dev, ret, "failed to enable spi_clk\n");
|
|
}
|
|
|
|
mdata->spi_clk_hz = clk_get_rate(mdata->spi_clk);
|
|
|
|
if (mdata->dev_comp->no_need_unprepare) {
|
|
clk_disable(mdata->spi_clk);
|
|
clk_disable(mdata->spi_hclk);
|
|
} else {
|
|
clk_disable_unprepare(mdata->spi_clk);
|
|
clk_disable_unprepare(mdata->spi_hclk);
|
|
}
|
|
|
|
if (mdata->dev_comp->need_pad_sel) {
|
|
if (mdata->pad_num != host->num_chipselect)
|
|
return dev_err_probe(dev, -EINVAL,
|
|
"pad_num does not match num_chipselect(%d != %d)\n",
|
|
mdata->pad_num, host->num_chipselect);
|
|
|
|
if (!host->cs_gpiods && host->num_chipselect > 1)
|
|
return dev_err_probe(dev, -EINVAL,
|
|
"cs_gpios not specified and num_chipselect > 1\n");
|
|
}
|
|
|
|
if (mdata->dev_comp->dma_ext)
|
|
addr_bits = DMA_ADDR_EXT_BITS;
|
|
else
|
|
addr_bits = DMA_ADDR_DEF_BITS;
|
|
ret = dma_set_mask(dev, DMA_BIT_MASK(addr_bits));
|
|
if (ret)
|
|
dev_notice(dev, "SPI dma_set_mask(%d) failed, ret:%d\n",
|
|
addr_bits, ret);
|
|
|
|
ret = devm_request_irq(dev, irq, mtk_spi_interrupt,
|
|
IRQF_TRIGGER_NONE, dev_name(dev), host);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to register irq\n");
|
|
|
|
pm_runtime_enable(dev);
|
|
|
|
ret = devm_spi_register_controller(dev, host);
|
|
if (ret) {
|
|
pm_runtime_disable(dev);
|
|
return dev_err_probe(dev, ret, "failed to register host\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *host = platform_get_drvdata(pdev);
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
int ret;
|
|
|
|
if (mdata->use_spimem && !completion_done(&mdata->spimem_done))
|
|
complete(&mdata->spimem_done);
|
|
|
|
ret = pm_runtime_get_sync(&pdev->dev);
|
|
if (ret < 0) {
|
|
dev_warn(&pdev->dev, "Failed to resume hardware (%pe)\n", ERR_PTR(ret));
|
|
} else {
|
|
/*
|
|
* If pm runtime resume failed, clks are disabled and
|
|
* unprepared. So don't access the hardware and skip clk
|
|
* unpreparing.
|
|
*/
|
|
mtk_spi_reset(mdata);
|
|
|
|
if (mdata->dev_comp->no_need_unprepare) {
|
|
clk_unprepare(mdata->spi_clk);
|
|
clk_unprepare(mdata->spi_hclk);
|
|
}
|
|
}
|
|
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mtk_spi_suspend(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct spi_controller *host = dev_get_drvdata(dev);
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
ret = spi_controller_suspend(host);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!pm_runtime_suspended(dev)) {
|
|
clk_disable_unprepare(mdata->spi_clk);
|
|
clk_disable_unprepare(mdata->spi_hclk);
|
|
}
|
|
|
|
pinctrl_pm_select_sleep_state(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_spi_resume(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct spi_controller *host = dev_get_drvdata(dev);
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
pinctrl_pm_select_default_state(dev);
|
|
|
|
if (!pm_runtime_suspended(dev)) {
|
|
ret = clk_prepare_enable(mdata->spi_clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to enable spi_clk (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(mdata->spi_hclk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to enable spi_hclk (%d)\n", ret);
|
|
clk_disable_unprepare(mdata->spi_clk);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = spi_controller_resume(host);
|
|
if (ret < 0) {
|
|
clk_disable_unprepare(mdata->spi_clk);
|
|
clk_disable_unprepare(mdata->spi_hclk);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mtk_spi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_controller *host = dev_get_drvdata(dev);
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
|
|
if (mdata->dev_comp->no_need_unprepare) {
|
|
clk_disable(mdata->spi_clk);
|
|
clk_disable(mdata->spi_hclk);
|
|
} else {
|
|
clk_disable_unprepare(mdata->spi_clk);
|
|
clk_disable_unprepare(mdata->spi_hclk);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_spi_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_controller *host = dev_get_drvdata(dev);
|
|
struct mtk_spi *mdata = spi_controller_get_devdata(host);
|
|
int ret;
|
|
|
|
if (mdata->dev_comp->no_need_unprepare) {
|
|
ret = clk_enable(mdata->spi_clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to enable spi_clk (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
ret = clk_enable(mdata->spi_hclk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to enable spi_hclk (%d)\n", ret);
|
|
clk_disable(mdata->spi_clk);
|
|
return ret;
|
|
}
|
|
} else {
|
|
ret = clk_prepare_enable(mdata->spi_clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to prepare_enable spi_clk (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(mdata->spi_hclk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to prepare_enable spi_hclk (%d)\n", ret);
|
|
clk_disable_unprepare(mdata->spi_clk);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct dev_pm_ops mtk_spi_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(mtk_spi_suspend, mtk_spi_resume)
|
|
SET_RUNTIME_PM_OPS(mtk_spi_runtime_suspend,
|
|
mtk_spi_runtime_resume, NULL)
|
|
};
|
|
|
|
static struct platform_driver mtk_spi_driver = {
|
|
.driver = {
|
|
.name = "mtk-spi",
|
|
.pm = &mtk_spi_pm,
|
|
.of_match_table = mtk_spi_of_match,
|
|
},
|
|
.probe = mtk_spi_probe,
|
|
.remove_new = mtk_spi_remove,
|
|
};
|
|
|
|
module_platform_driver(mtk_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("MTK SPI Controller driver");
|
|
MODULE_AUTHOR("Leilk Liu <leilk.liu@mediatek.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:mtk-spi");
|