linux/arch/arm/mach-imx/gpc.c
Anson Huang 263475d4e0 ARM: imx: enable RBC to support anatop LPM mode
RBC is to control whether some ANATOP sub modules
can enter lpm mode when SOC is into STOP mode, if
RBC is enabled and PMIC_VSTBY_REQ is set, ANATOP
will have below behaviors:

1. Digital LDOs(CORE, SOC and PU) are bypassed;
2. Analog LDOs(1P1, 2P5, 3P0) are disabled;

As the 2P5 is necessary for DRAM IO pre-drive in
STOP mode, so we need to enable weak 2P5 in STOP
mode when 2P5 LDO is disabled.

For RBC settings, there are some rules as below
due to hardware design:

1. All interrupts must be masked during operating
   RBC registers;
2. At least 2 CKIL(32K) cycles is needed after the
   RBC setting is changed.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-12 19:01:43 +08:00

140 lines
3.1 KiB
C

/*
* Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/irqchip/arm-gic.h>
#define GPC_IMR1 0x008
#define GPC_PGC_CPU_PDN 0x2a0
#define IMR_NUM 4
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
void imx_gpc_pre_suspend(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Tell GPC to power off ARM core when suspend */
writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
}
}
void imx_gpc_post_resume(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Keep ARM core powered on for other low-power modes */
writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
}
static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
{
unsigned int idx = d->irq / 32 - 1;
u32 mask;
/* Sanity check for SPI irq */
if (d->irq < 32)
return -EINVAL;
mask = 1 << d->irq % 32;
gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
gpc_wake_irqs[idx] & ~mask;
return 0;
}
void imx_gpc_mask_all(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
writel_relaxed(~0, reg_imr1 + i * 4);
}
}
void imx_gpc_restore_all(void)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
}
static void imx_gpc_irq_unmask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
/* Sanity check for SPI irq */
if (d->irq < 32)
return;
reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
val = readl_relaxed(reg);
val &= ~(1 << d->irq % 32);
writel_relaxed(val, reg);
}
static void imx_gpc_irq_mask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
/* Sanity check for SPI irq */
if (d->irq < 32)
return;
reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
val = readl_relaxed(reg);
val |= 1 << (d->irq % 32);
writel_relaxed(val, reg);
}
void __init imx_gpc_init(void)
{
struct device_node *np;
int i;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
gpc_base = of_iomap(np, 0);
WARN_ON(!gpc_base);
/* Initially mask all interrupts */
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
/* Register GPC as the secondary interrupt controller behind GIC */
gic_arch_extn.irq_mask = imx_gpc_irq_mask;
gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
}