linux/drivers/pci/controller/pcie-brcmstb.c
Linus Torvalds d0a231f01e pci-v5.17-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmHgpugUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vz59g//eWRLb0j2Vgv84ZH4x1iv6MaBboQr
 2wScnfoN+MIoh+tuM4kRak15X4nB8rJhNZZCzesMUN6PeZvrkoPo4sz/xdzIrA/N
 qY3h8NZ3nC4yCvs/tGem0zZUcSCJsxUAD0eegyMSa142xGIOQTHBSJRflR9osKSo
 bnQlKTkugV8t4kD7NlQ5M3HzN3R+mjsII5JNzCqv2XlzAZG3D8DhPyIpZnRNAOmW
 KiHOVXvQOocfUlvSs5kBlhgR1HgJkGnruCrJ1iDCWQH1Zk0iuVgoZWgVda6Cs3Xv
 gcTJLB7VoSdNZKnct9aMNYPKziHkYc7clilPeDsJs5TlSv3kKERzLj6c/5ZAxFWN
 +RsH+zYHDXJSsL/w0twPnaF5WCuVYUyrs3UiSjUvShKl1T9k9J+Jo8zwUUZx8Xb0
 qXX8jRGMHolBGwPXm2fHEb4bwTUI8emPj29qK4L96KsQ3zKXWB8eGSosxUP52Tti
 RR2WZjkvwlREZCJp6jSEJYkhzoEaVAm8CjKpKUuneX9WcUOsMBSs9k7EXbUy7JeM
 hq5Keuqa8PZo/IK2DYYAchNnBJUDMsWJeduBW12qSmx3J+9victP2qOFu+9skP0a
 85xlO6Cx8beiQh+XnY7jyROvIFuxTnGKHgkq/89Ham/whEzdJ+GRIiYB218kLLCW
 ILdas3C2iiGz99I=
 =Vgg4
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Use pci_find_vsec_capability() instead of open-coding it (Andy
     Shevchenko)
   - Convert pci_dev_present() stub from macro to static inline to avoid
     'unused variable' errors (Hans de Goede)
   - Convert sysfs slot attributes from default_attrs to default_groups
     (Greg Kroah-Hartman)
   - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
     (Rajat Jain)
   - Remove unnecessary initialization of static variables (Longji Guo)

  Resource management:
   - Always write Intel I210 ROM BAR on update to work around device
     defect (Bjorn Helgaas)

  PCIe native device hotplug:
   - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
   - Fix infinite loop in pciehp IRQ handler on power fault (Lukas
     Wunner)

  Power management:
   - Convert amd64-agp, sis-agp, via-agp from legacy PCI power
     management to generic power management (Vaibhav Gupta)

  IOMMU:
   - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
     so it can work with an IOMMU (Yifeng Li)

  Error handling:
   - Add PCI_ERROR_RESPONSE and related definitions for signaling and
     checking for transaction errors on PCI (Naveen Naidu)
   - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
     instead of in host controller drivers, when transactions fail on
     PCI (Naveen Naidu)
   - Use PCI_POSSIBLE_ERROR() to check for possible failure of config
     reads (Naveen Naidu)

  Peer-to-peer DMA:
   - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)

  ASPM:
   - Calculate link L0s and L1 exit latencies when needed instead of
     caching them (Saheed O. Bolarinwa)
   - Calculate device L0s and L1 acceptable exit latencies when needed
     instead of caching them (Saheed O. Bolarinwa)
   - Remove struct aspm_latency since it's no longer needed (Saheed O.
     Bolarinwa)

  APM X-Gene PCIe controller driver:
   - Fix IB window setup, which was broken by the fact that IB resources
     are now sorted in address order instead of DT dma-ranges order (Rob
     Herring)

  Apple PCIe controller driver:
   - Enable clock gating to save power (Hector Martin)
   - Fix REFCLK1 enable/poll logic (Hector Martin)

  Broadcom STB PCIe controller driver:
   - Declare bitmap correctly for use by bitmap interfaces (Christophe
     JAILLET)
   - Clean up computation of legacy and non-legacy MSI bitmasks (Florian
     Fainelli)
   - Update suspend/resume/remove error handling to warn about errors
     and not fail the operation (Jim Quinlan)
   - Correct the "pcie" and "msi" interrupt descriptions in DT binding
     (Jim Quinlan)
   - Add DT bindings for endpoint voltage regulators (Jim Quinlan)
   - Split brcm_pcie_setup() into two functions (Jim Quinlan)
   - Add mechanism for turning on voltage regulators for connected
     devices (Jim Quinlan)
   - Turn voltage regulators for connected devices on/off when bus is
     added or removed (Jim Quinlan)
   - When suspending, don't turn off voltage regulators for wakeup
     devices (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Add i.MX8MM support (Richard Zhu)

  Freescale Layerscape PCIe controller driver:
   - Use DWC common ops instead of layerscape-specific link-up functions
     (Hou Zhiqiang)

  Intel VMD host bridge driver:
   - Honor platform ACPI _OSC feature negotiation for Root Ports below
     VMD (Kai-Heng Feng)
   - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
   - Reset everything below VMD before enumerating to work around
     failure to enumerate NVMe devices when guest OS reboots (Nirmal
     Patel)

  Bridge emulation (used by Marvell Aardvark and MVEBU):
   - Make emulated ROM BAR read-only by default (Pali Rohár)
   - Make some emulated legacy PCI bits read-only for PCIe devices (Pali
     Rohár)
   - Update reserved bits in emulated PCIe Capability (Pali Rohár)
   - Allow drivers to emulate different PCIe Capability versions (Pali
     Rohár)
   - Set emulated Capabilities List bit for all PCIe devices, since they
     must have at least a PCIe Capability (Pali Rohár)

  Marvell Aardvark PCIe controller driver:
   - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
     DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
     Rohár)
   - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
     registers (Pali Rohár)
   - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)
   - Disable bus mastering when unbinding host controller driver (Pali
     Rohár)
   - Mask all interrupts when unbinding host controller driver (Pali
     Rohár)
   - Fix memory leak in host controller unbind (Pali Rohár)
   - Assert PERST# when unbinding host controller driver (Pali Rohár)
   - Disable link training when unbinding host controller driver (Pali
     Rohár)
   - Disable common PHY when unbinding host controller driver (Pali
     Rohár)
   - Fix resource type checking to check only IORESOURCE_MEM, not
     IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)

  Marvell MVEBU PCIe controller driver:
   - Implement pci_remap_iospace() for ARM so mvebu can use
     devm_pci_remap_iospace() instead of the previous ARM-specific
     pci_ioremap_io() interface (Pali Rohár)
   - Use the standard pci_host_probe() instead of the device-specific
     mvebu_pci_host_probe() (Pali Rohár)
   - Replace all uses of ARM-specific pci_ioremap_io() with the ARM
     implementation of the standard pci_remap_iospace() interface and
     remove pci_ioremap_io() (Pali Rohár)
   - Skip initializing invalid Root Ports (Pali Rohár)
   - Check for errors from pci_bridge_emul_init() (Pali Rohár)
   - Ignore any bridges at non-zero function numbers (Pali Rohár)
   - Return ~0 data for invalid config read size (Pali Rohár)
   - Disallow mapping interrupts on emulated bridges (Pali Rohár)
   - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
     initialization (Pali Rohár)
   - Make type bits in Root Port I/O Base register read-only (Pali
     Rohár)
   - Disable Root Port windows when base/limit set to invalid values
     (Pali Rohár)
   - Set controller to Root Complex mode (Pali Rohár)
   - Set Root Port Class Code to PCI Bridge (Pali Rohár)
   - Update emulated Root Port secondary bus numbers to better reflect
     the actual topology (Pali Rohár)
   - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
     pci_reset_secondary_bus() can reset connected devices (Pali Rohár)
   - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
     Ports (Pali Rohár)
   - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
     (Pali Rohár)
   - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
     Armada XP and newer devices (Pali Rohár)
   - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
     (Pali Rohár)
   - Add support for compiling as a module (Pali Rohár)

  MediaTek PCIe controller driver:
   - Assert PERST# for 100ms to allow power and clock to stabilize
     (qizhong cheng)

  MediaTek PCIe Gen3 controller driver:
   - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
     respond to the request causes failure to exit L1 PM Substate
     (Jianjun Wang)

  MediaTek MT7621 PCIe controller driver:
   - Declare mt7621_pci_ops static (Sergio Paracuellos)
   - Give pcibios_root_bridge_prepare() access to host bridge windows
     (Sergio Paracuellos)
   - Move MIPS I/O coherency unit setup from driver to
     pcibios_root_bridge_prepare() (Sergio Paracuellos)
   - Add missing MODULE_LICENSE() (Sergio Paracuellos)
   - Allow COMPILE_TEST for all arches (Sergio Paracuellos)

  Microsoft Hyper-V host bridge driver:
   - Add hv-internal interfaces to encapsulate arch IRQ dependencies
     (Sunil Muthuswamy)
   - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)

  Qualcomm PCIe controller driver:
   - Undo PM setup in qcom_pcie_probe() error handling path (Christophe
     JAILLET)
   - Use __be16 type to store return value from cpu_to_be16()
     (Manivannan Sadhasivam)
   - Constify static dw_pcie_ep_ops (Rikard Falkeborn)

  Renesas R-Car PCIe controller driver:
   - Fix aarch32 abort handler so it doesn't check the wrong bus clock
     before accessing the host controller (Marek Vasut)

  TI Keystone PCIe controller driver:
   - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
     DT properties (Kishon Vijay Abraham I)

  MicroSemi Switchtec management driver:
   - Add Gen4 automotive device IDs (Kelvin Cao)
   - Declare state_names[] as static so it's not allocated and
     initialized for every call (Kelvin Cao)

  Host controller driver cleanups:
   - Use of_device_get_match_data(), not of_match_device(), when we only
     need the device data in altera, artpec6, cadence, designware-plat,
     dra7xx, keystone, kirin (Fan Fei)
   - Drop pointless of_device_get_match_data() cast in j721e (Bjorn
     Helgaas)
   - Drop redundant struct device * from j721e since struct cdns_pcie
     already has one (Bjorn Helgaas)
   - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
     mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
     xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
   - Fix invalid address space conversions in hisi, spear13xx (Bjorn
     Helgaas)

  Miscellaneous:
   - Sort Intel Device IDs by value (Andy Shevchenko)
   - Change Capability offsets to hex to match spec (Baruch Siach)
   - Correct misspellings (Krzysztof Wilczyński)
   - Terminate statement with semicolon in pci_endpoint_test.c (Ming
     Wang)"

* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
  PCI: mt7621: Allow COMPILE_TEST for all arches
  PCI: mt7621: Add missing MODULE_LICENSE()
  PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
  PCI: Let pcibios_root_bridge_prepare() access bridge->windows
  PCI: mt7621: Declare mt7621_pci_ops static
  PCI: brcmstb: Do not turn off WOL regulators on suspend
  PCI: brcmstb: Add control of subdevice voltage regulators
  PCI: brcmstb: Add mechanism to turn on subdev regulators
  PCI: brcmstb: Split brcm_pcie_setup() into two funcs
  dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
  dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
  PCI: brcmstb: Fix function return value handling
  PCI: brcmstb: Do not use __GENMASK
  PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
  PCI: hv: Add arm64 Hyper-V vPCI support
  PCI: hv: Make the code arch neutral by adding arch specific interfaces
  PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
  x86/PCI: Remove initialization of static variables to false
  PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
  misc: pci_endpoint_test: Terminate statement with semicolon
  ...
2022-01-16 08:08:11 +02:00

1646 lines
47 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/* Copyright (C) 2009 - 2019 Broadcom */
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/compiler.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
#include <linux/pci.h>
#include <linux/pci-ecam.h>
#include <linux/printk.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/types.h>
#include "../pci.h"
/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
#define BRCM_PCIE_CAP_REGS 0x00ac
/* Broadcom STB PCIe Register Offsets */
#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188
#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
#define PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN 0x0
#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c
#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY 0x04dc
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK 0xc00
#define PCIE_RC_DL_MDIO_ADDR 0x1100
#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
#define PCIE_MISC_MISC_CTRL 0x4008
#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000
#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000
#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000
#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000
#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK 0x07c00000
#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK 0x0000001f
#define SCB_SIZE_MASK(x) PCIE_MISC_MISC_CTRL_SCB ## x ## _SIZE_MASK
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c
#define PCIE_MEM_WIN0_LO(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 8)
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010
#define PCIE_MEM_WIN0_HI(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 8)
#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c
#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f
#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034
#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f
#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038
#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c
#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f
#define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044
#define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048
#define PCIE_MISC_MSI_DATA_CONFIG 0x404c
#define PCIE_MISC_MSI_DATA_CONFIG_VAL_32 0xffe06540
#define PCIE_MISC_MSI_DATA_CONFIG_VAL_8 0xfff86540
#define PCIE_MISC_PCIE_CTRL 0x4064
#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1
#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4
#define PCIE_MISC_PCIE_STATUS 0x4068
#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80
#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20
#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10
#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40
#define PCIE_MISC_REVISION 0x406c
#define BRCM_PCIE_HW_REV_33 0x0303
#define BRCM_PCIE_HW_REV_3_20 0x0320
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0
#define PCIE_MEM_WIN0_BASE_LIMIT(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4)
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff
#define PCIE_MEM_WIN0_BASE_HI(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8)
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff
#define PCIE_MEM_WIN0_LIMIT_HI(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
#define PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x00800000
#define PCIE_INTR2_CPU_BASE 0x4300
#define PCIE_MSI_INTR2_BASE 0x4500
/* Offsets from PCIE_INTR2_CPU_BASE and PCIE_MSI_INTR2_BASE */
#define MSI_INT_STATUS 0x0
#define MSI_INT_CLR 0x8
#define MSI_INT_MASK_SET 0x10
#define MSI_INT_MASK_CLR 0x14
#define PCIE_EXT_CFG_DATA 0x8000
#define PCIE_EXT_CFG_INDEX 0x9000
#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1
#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0
#define RGR1_SW_INIT_1_INIT_GENERIC_MASK 0x2
#define RGR1_SW_INIT_1_INIT_GENERIC_SHIFT 0x1
#define RGR1_SW_INIT_1_INIT_7278_MASK 0x1
#define RGR1_SW_INIT_1_INIT_7278_SHIFT 0x0
/* PCIe parameters */
#define BRCM_NUM_PCIE_OUT_WINS 0x4
#define BRCM_INT_PCI_MSI_NR 32
#define BRCM_INT_PCI_MSI_LEGACY_NR 8
#define BRCM_INT_PCI_MSI_SHIFT 0
#define BRCM_INT_PCI_MSI_MASK GENMASK(BRCM_INT_PCI_MSI_NR - 1, 0)
#define BRCM_INT_PCI_MSI_LEGACY_MASK GENMASK(31, \
32 - BRCM_INT_PCI_MSI_LEGACY_NR)
/* MSI target addresses */
#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL
#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL
/* MDIO registers */
#define MDIO_PORT0 0x0
#define MDIO_DATA_MASK 0x7fffffff
#define MDIO_PORT_MASK 0xf0000
#define MDIO_REGAD_MASK 0xffff
#define MDIO_CMD_MASK 0xfff00000
#define MDIO_CMD_READ 0x1
#define MDIO_CMD_WRITE 0x0
#define MDIO_DATA_DONE_MASK 0x80000000
#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0)
#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1)
#define SSC_REGS_ADDR 0x1100
#define SET_ADDR_OFFSET 0x1f
#define SSC_CNTL_OFFSET 0x2
#define SSC_CNTL_OVRD_EN_MASK 0x8000
#define SSC_CNTL_OVRD_VAL_MASK 0x4000
#define SSC_STATUS_OFFSET 0x1
#define SSC_STATUS_SSC_MASK 0x400
#define SSC_STATUS_PLL_LOCK_MASK 0x800
#define PCIE_BRCM_MAX_MEMC 3
#define IDX_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_INDEX])
#define DATA_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_DATA])
#define PCIE_RGR1_SW_INIT_1(pcie) (pcie->reg_offsets[RGR1_SW_INIT_1])
/* Rescal registers */
#define PCIE_DVT_PMU_PCIE_PHY_CTRL 0xc700
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS 0x3
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK 0x4
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT 0x2
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK 0x2
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT 0x1
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK 0x1
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT 0x0
/* Forward declarations */
struct brcm_pcie;
static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val);
static int brcm_pcie_linkup(struct brcm_pcie *pcie);
static int brcm_pcie_add_bus(struct pci_bus *bus);
enum {
RGR1_SW_INIT_1,
EXT_CFG_INDEX,
EXT_CFG_DATA,
};
enum {
RGR1_SW_INIT_1_INIT_MASK,
RGR1_SW_INIT_1_INIT_SHIFT,
};
enum pcie_type {
GENERIC,
BCM7425,
BCM7435,
BCM4908,
BCM7278,
BCM2711,
};
struct pcie_cfg_data {
const int *offsets;
const enum pcie_type type;
void (*perst_set)(struct brcm_pcie *pcie, u32 val);
void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
};
static const int pcie_offsets[] = {
[RGR1_SW_INIT_1] = 0x9210,
[EXT_CFG_INDEX] = 0x9000,
[EXT_CFG_DATA] = 0x9004,
};
static const int pcie_offsets_bmips_7425[] = {
[RGR1_SW_INIT_1] = 0x8010,
[EXT_CFG_INDEX] = 0x8300,
[EXT_CFG_DATA] = 0x8304,
};
static const struct pcie_cfg_data generic_cfg = {
.offsets = pcie_offsets,
.type = GENERIC,
.perst_set = brcm_pcie_perst_set_generic,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
static const struct pcie_cfg_data bcm7425_cfg = {
.offsets = pcie_offsets_bmips_7425,
.type = BCM7425,
.perst_set = brcm_pcie_perst_set_generic,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
static const struct pcie_cfg_data bcm7435_cfg = {
.offsets = pcie_offsets,
.type = BCM7435,
.perst_set = brcm_pcie_perst_set_generic,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
static const struct pcie_cfg_data bcm4908_cfg = {
.offsets = pcie_offsets,
.type = BCM4908,
.perst_set = brcm_pcie_perst_set_4908,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
static const int pcie_offset_bcm7278[] = {
[RGR1_SW_INIT_1] = 0xc010,
[EXT_CFG_INDEX] = 0x9000,
[EXT_CFG_DATA] = 0x9004,
};
static const struct pcie_cfg_data bcm7278_cfg = {
.offsets = pcie_offset_bcm7278,
.type = BCM7278,
.perst_set = brcm_pcie_perst_set_7278,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
};
static const struct pcie_cfg_data bcm2711_cfg = {
.offsets = pcie_offsets,
.type = BCM2711,
.perst_set = brcm_pcie_perst_set_generic,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
struct subdev_regulators {
unsigned int num_supplies;
struct regulator_bulk_data supplies[];
};
static int pci_subdev_regulators_add_bus(struct pci_bus *bus);
static void pci_subdev_regulators_remove_bus(struct pci_bus *bus);
struct brcm_msi {
struct device *dev;
void __iomem *base;
struct device_node *np;
struct irq_domain *msi_domain;
struct irq_domain *inner_domain;
struct mutex lock; /* guards the alloc/free operations */
u64 target_addr;
int irq;
DECLARE_BITMAP(used, BRCM_INT_PCI_MSI_NR);
bool legacy;
/* Some chips have MSIs in bits [31..24] of a shared register. */
int legacy_shift;
int nr; /* No. of MSI available, depends on chip */
/* This is the base pointer for interrupt status/set/clr regs */
void __iomem *intr_base;
};
/* Internal PCIe Host Controller Information.*/
struct brcm_pcie {
struct device *dev;
void __iomem *base;
struct clk *clk;
struct device_node *np;
bool ssc;
int gen;
u64 msi_target_addr;
struct brcm_msi *msi;
const int *reg_offsets;
enum pcie_type type;
struct reset_control *rescal;
struct reset_control *perst_reset;
int num_memc;
u64 memc_size[PCIE_BRCM_MAX_MEMC];
u32 hw_rev;
void (*perst_set)(struct brcm_pcie *pcie, u32 val);
void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
bool refusal_mode;
struct subdev_regulators *sr;
bool ep_wakeup_capable;
};
static inline bool is_bmips(const struct brcm_pcie *pcie)
{
return pcie->type == BCM7435 || pcie->type == BCM7425;
}
/*
* This is to convert the size of the inbound "BAR" region to the
* non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE
*/
static int brcm_pcie_encode_ibar_size(u64 size)
{
int log2_in = ilog2(size);
if (log2_in >= 12 && log2_in <= 15)
/* Covers 4KB to 32KB (inclusive) */
return (log2_in - 12) + 0x1c;
else if (log2_in >= 16 && log2_in <= 35)
/* Covers 64KB to 32GB, (inclusive) */
return log2_in - 15;
/* Something is awry so disable */
return 0;
}
static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd)
{
u32 pkt = 0;
pkt |= FIELD_PREP(MDIO_PORT_MASK, port);
pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad);
pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd);
return pkt;
}
/* negative return value indicates error */
static int brcm_pcie_mdio_read(void __iomem *base, u8 port, u8 regad, u32 *val)
{
int tries;
u32 data;
writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ),
base + PCIE_RC_DL_MDIO_ADDR);
readl(base + PCIE_RC_DL_MDIO_ADDR);
data = readl(base + PCIE_RC_DL_MDIO_RD_DATA);
for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) {
udelay(10);
data = readl(base + PCIE_RC_DL_MDIO_RD_DATA);
}
*val = FIELD_GET(MDIO_DATA_MASK, data);
return MDIO_RD_DONE(data) ? 0 : -EIO;
}
/* negative return value indicates error */
static int brcm_pcie_mdio_write(void __iomem *base, u8 port,
u8 regad, u16 wrdata)
{
int tries;
u32 data;
writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE),
base + PCIE_RC_DL_MDIO_ADDR);
readl(base + PCIE_RC_DL_MDIO_ADDR);
writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA);
data = readl(base + PCIE_RC_DL_MDIO_WR_DATA);
for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) {
udelay(10);
data = readl(base + PCIE_RC_DL_MDIO_WR_DATA);
}
return MDIO_WT_DONE(data) ? 0 : -EIO;
}
/*
* Configures device for Spread Spectrum Clocking (SSC) mode; a negative
* return value indicates error.
*/
static int brcm_pcie_set_ssc(struct brcm_pcie *pcie)
{
int pll, ssc;
int ret;
u32 tmp;
ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, SET_ADDR_OFFSET,
SSC_REGS_ADDR);
if (ret < 0)
return ret;
ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0,
SSC_CNTL_OFFSET, &tmp);
if (ret < 0)
return ret;
u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_EN_MASK);
u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_VAL_MASK);
ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0,
SSC_CNTL_OFFSET, tmp);
if (ret < 0)
return ret;
usleep_range(1000, 2000);
ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0,
SSC_STATUS_OFFSET, &tmp);
if (ret < 0)
return ret;
ssc = FIELD_GET(SSC_STATUS_SSC_MASK, tmp);
pll = FIELD_GET(SSC_STATUS_PLL_LOCK_MASK, tmp);
return ssc && pll ? 0 : -EIO;
}
static void *alloc_subdev_regulators(struct device *dev)
{
static const char * const supplies[] = {
"vpcie3v3",
"vpcie3v3aux",
"vpcie12v",
};
const size_t size = sizeof(struct subdev_regulators)
+ sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies);
struct subdev_regulators *sr;
int i;
sr = devm_kzalloc(dev, size, GFP_KERNEL);
if (sr) {
sr->num_supplies = ARRAY_SIZE(supplies);
for (i = 0; i < ARRAY_SIZE(supplies); i++)
sr->supplies[i].supply = supplies[i];
}
return sr;
}
static int pci_subdev_regulators_add_bus(struct pci_bus *bus)
{
struct device *dev = &bus->dev;
struct subdev_regulators *sr;
int ret;
if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent))
return 0;
if (dev->driver_data)
dev_err(dev, "dev.driver_data unexpectedly non-NULL\n");
sr = alloc_subdev_regulators(dev);
if (!sr)
return -ENOMEM;
dev->driver_data = sr;
ret = regulator_bulk_get(dev, sr->num_supplies, sr->supplies);
if (ret)
return ret;
ret = regulator_bulk_enable(sr->num_supplies, sr->supplies);
if (ret) {
dev_err(dev, "failed to enable regulators for downstream device\n");
return ret;
}
return 0;
}
static int brcm_pcie_add_bus(struct pci_bus *bus)
{
struct device *dev = &bus->dev;
struct brcm_pcie *pcie = (struct brcm_pcie *) bus->sysdata;
int ret;
if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent))
return 0;
ret = pci_subdev_regulators_add_bus(bus);
if (ret)
return ret;
/* Grab the regulators for suspend/resume */
pcie->sr = bus->dev.driver_data;
/*
* If we have failed linkup there is no point to return an error as
* currently it will cause a WARNING() from pci_alloc_child_bus().
* We return 0 and turn on the "refusal_mode" so that any further
* accesses to the pci_dev just get 0xffffffff
*/
if (brcm_pcie_linkup(pcie) != 0)
pcie->refusal_mode = true;
return 0;
}
static void pci_subdev_regulators_remove_bus(struct pci_bus *bus)
{
struct device *dev = &bus->dev;
struct subdev_regulators *sr = dev->driver_data;
if (!sr || !bus->parent || !pci_is_root_bus(bus->parent))
return;
if (regulator_bulk_disable(sr->num_supplies, sr->supplies))
dev_err(dev, "failed to disable regulators for downstream device\n");
dev->driver_data = NULL;
}
/* Limits operation to a specific generation (1, 2, or 3) */
static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen)
{
u16 lnkctl2 = readw(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
u32 lnkcap = readl(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
writel(lnkcap, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
lnkctl2 = (lnkctl2 & ~0xf) | gen;
writew(lnkctl2, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
}
static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
unsigned int win, u64 cpu_addr,
u64 pcie_addr, u64 size)
{
u32 cpu_addr_mb_high, limit_addr_mb_high;
phys_addr_t cpu_addr_mb, limit_addr_mb;
int high_addr_shift;
u32 tmp;
/* Set the base of the pcie_addr window */
writel(lower_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_LO(win));
writel(upper_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_HI(win));
/* Write the addr base & limit lower bits (in MBs) */
cpu_addr_mb = cpu_addr / SZ_1M;
limit_addr_mb = (cpu_addr + size - 1) / SZ_1M;
tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win));
u32p_replace_bits(&tmp, cpu_addr_mb,
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK);
u32p_replace_bits(&tmp, limit_addr_mb,
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK);
writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win));
if (is_bmips(pcie))
return;
/* Write the cpu & limit addr upper bits */
high_addr_shift =
HWEIGHT32(PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK);
cpu_addr_mb_high = cpu_addr_mb >> high_addr_shift;
tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_HI(win));
u32p_replace_bits(&tmp, cpu_addr_mb_high,
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK);
writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_HI(win));
limit_addr_mb_high = limit_addr_mb >> high_addr_shift;
tmp = readl(pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win));
u32p_replace_bits(&tmp, limit_addr_mb_high,
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK);
writel(tmp, pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win));
}
static struct irq_chip brcm_msi_irq_chip = {
.name = "BRCM STB PCIe MSI",
.irq_ack = irq_chip_ack_parent,
.irq_mask = pci_msi_mask_irq,
.irq_unmask = pci_msi_unmask_irq,
};
static struct msi_domain_info brcm_msi_domain_info = {
/* Multi MSI is supported by the controller, but not by this driver */
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
.chip = &brcm_msi_irq_chip,
};
static void brcm_pcie_msi_isr(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned long status;
struct brcm_msi *msi;
struct device *dev;
u32 bit;
chained_irq_enter(chip, desc);
msi = irq_desc_get_handler_data(desc);
dev = msi->dev;
status = readl(msi->intr_base + MSI_INT_STATUS);
status >>= msi->legacy_shift;
for_each_set_bit(bit, &status, msi->nr) {
int ret;
ret = generic_handle_domain_irq(msi->inner_domain, bit);
if (ret)
dev_dbg(dev, "unexpected MSI\n");
}
chained_irq_exit(chip, desc);
}
static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
msg->address_lo = lower_32_bits(msi->target_addr);
msg->address_hi = upper_32_bits(msi->target_addr);
msg->data = (0xffff & PCIE_MISC_MSI_DATA_CONFIG_VAL_32) | data->hwirq;
}
static int brcm_msi_set_affinity(struct irq_data *irq_data,
const struct cpumask *mask, bool force)
{
return -EINVAL;
}
static void brcm_msi_ack_irq(struct irq_data *data)
{
struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
const int shift_amt = data->hwirq + msi->legacy_shift;
writel(1 << shift_amt, msi->intr_base + MSI_INT_CLR);
}
static struct irq_chip brcm_msi_bottom_irq_chip = {
.name = "BRCM STB MSI",
.irq_compose_msi_msg = brcm_msi_compose_msi_msg,
.irq_set_affinity = brcm_msi_set_affinity,
.irq_ack = brcm_msi_ack_irq,
};
static int brcm_msi_alloc(struct brcm_msi *msi)
{
int hwirq;
mutex_lock(&msi->lock);
hwirq = bitmap_find_free_region(msi->used, msi->nr, 0);
mutex_unlock(&msi->lock);
return hwirq;
}
static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq)
{
mutex_lock(&msi->lock);
bitmap_release_region(msi->used, hwirq, 0);
mutex_unlock(&msi->lock);
}
static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *args)
{
struct brcm_msi *msi = domain->host_data;
int hwirq;
hwirq = brcm_msi_alloc(msi);
if (hwirq < 0)
return hwirq;
irq_domain_set_info(domain, virq, (irq_hw_number_t)hwirq,
&brcm_msi_bottom_irq_chip, domain->host_data,
handle_edge_irq, NULL, NULL);
return 0;
}
static void brcm_irq_domain_free(struct irq_domain *domain,
unsigned int virq, unsigned int nr_irqs)
{
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
struct brcm_msi *msi = irq_data_get_irq_chip_data(d);
brcm_msi_free(msi, d->hwirq);
}
static const struct irq_domain_ops msi_domain_ops = {
.alloc = brcm_irq_domain_alloc,
.free = brcm_irq_domain_free,
};
static int brcm_allocate_domains(struct brcm_msi *msi)
{
struct fwnode_handle *fwnode = of_node_to_fwnode(msi->np);
struct device *dev = msi->dev;
msi->inner_domain = irq_domain_add_linear(NULL, msi->nr, &msi_domain_ops, msi);
if (!msi->inner_domain) {
dev_err(dev, "failed to create IRQ domain\n");
return -ENOMEM;
}
msi->msi_domain = pci_msi_create_irq_domain(fwnode,
&brcm_msi_domain_info,
msi->inner_domain);
if (!msi->msi_domain) {
dev_err(dev, "failed to create MSI domain\n");
irq_domain_remove(msi->inner_domain);
return -ENOMEM;
}
return 0;
}
static void brcm_free_domains(struct brcm_msi *msi)
{
irq_domain_remove(msi->msi_domain);
irq_domain_remove(msi->inner_domain);
}
static void brcm_msi_remove(struct brcm_pcie *pcie)
{
struct brcm_msi *msi = pcie->msi;
if (!msi)
return;
irq_set_chained_handler_and_data(msi->irq, NULL, NULL);
brcm_free_domains(msi);
}
static void brcm_msi_set_regs(struct brcm_msi *msi)
{
u32 val = msi->legacy ? BRCM_INT_PCI_MSI_LEGACY_MASK :
BRCM_INT_PCI_MSI_MASK;
writel(val, msi->intr_base + MSI_INT_MASK_CLR);
writel(val, msi->intr_base + MSI_INT_CLR);
/*
* The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI
* enable, which we set to 1.
*/
writel(lower_32_bits(msi->target_addr) | 0x1,
msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO);
writel(upper_32_bits(msi->target_addr),
msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI);
val = msi->legacy ? PCIE_MISC_MSI_DATA_CONFIG_VAL_8 : PCIE_MISC_MSI_DATA_CONFIG_VAL_32;
writel(val, msi->base + PCIE_MISC_MSI_DATA_CONFIG);
}
static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
{
struct brcm_msi *msi;
int irq, ret;
struct device *dev = pcie->dev;
irq = irq_of_parse_and_map(dev->of_node, 1);
if (irq <= 0) {
dev_err(dev, "cannot map MSI interrupt\n");
return -ENODEV;
}
msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL);
if (!msi)
return -ENOMEM;
mutex_init(&msi->lock);
msi->dev = dev;
msi->base = pcie->base;
msi->np = pcie->np;
msi->target_addr = pcie->msi_target_addr;
msi->irq = irq;
msi->legacy = pcie->hw_rev < BRCM_PCIE_HW_REV_33;
/*
* Sanity check to make sure that the 'used' bitmap in struct brcm_msi
* is large enough.
*/
BUILD_BUG_ON(BRCM_INT_PCI_MSI_LEGACY_NR > BRCM_INT_PCI_MSI_NR);
if (msi->legacy) {
msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR;
msi->legacy_shift = 24;
} else {
msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE;
msi->nr = BRCM_INT_PCI_MSI_NR;
msi->legacy_shift = 0;
}
ret = brcm_allocate_domains(msi);
if (ret)
return ret;
irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi);
brcm_msi_set_regs(msi);
pcie->msi = msi;
return 0;
}
/* The controller is capable of serving in both RC and EP roles */
static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
{
void __iomem *base = pcie->base;
u32 val = readl(base + PCIE_MISC_PCIE_STATUS);
return !!FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK, val);
}
static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
{
u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS);
u32 dla = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK, val);
u32 plu = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK, val);
return dla && plu;
}
static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
int where)
{
struct brcm_pcie *pcie = bus->sysdata;
void __iomem *base = pcie->base;
int idx;
/* Accesses to the RC go right to the RC registers if slot==0 */
if (pci_is_root_bus(bus))
return PCI_SLOT(devfn) ? NULL : base + where;
if (pcie->refusal_mode) {
/*
* At this point we do not have link. There will be a CPU
* abort -- a quirk with this controller --if Linux tries
* to read any config-space registers besides those
* targeting the host bridge. To prevent this we hijack
* the address to point to a safe access that will return
* 0xffffffff.
*/
writel(0xffffffff, base + PCIE_MISC_RC_BAR2_CONFIG_HI);
return base + PCIE_MISC_RC_BAR2_CONFIG_HI + (where & 0x3);
}
/* For devices, write to the config space index register */
idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
return base + PCIE_EXT_CFG_DATA + where;
}
static void __iomem *brcm_pcie_map_conf32(struct pci_bus *bus, unsigned int devfn,
int where)
{
struct brcm_pcie *pcie = bus->sysdata;
void __iomem *base = pcie->base;
int idx;
/* Accesses to the RC go right to the RC registers if slot==0 */
if (pci_is_root_bus(bus))
return PCI_SLOT(devfn) ? NULL : base + (where & ~0x3);
/* For devices, write to the config space index register */
idx = PCIE_ECAM_OFFSET(bus->number, devfn, (where & ~3));
writel(idx, base + IDX_ADDR(pcie));
return base + DATA_ADDR(pcie);
}
static struct pci_ops brcm_pcie_ops = {
.map_bus = brcm_pcie_map_conf,
.read = pci_generic_config_read,
.write = pci_generic_config_write,
.add_bus = brcm_pcie_add_bus,
.remove_bus = pci_subdev_regulators_remove_bus,
};
static struct pci_ops brcm_pcie_ops32 = {
.map_bus = brcm_pcie_map_conf32,
.read = pci_generic_config_read32,
.write = pci_generic_config_write32,
};
static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val)
{
u32 tmp, mask = RGR1_SW_INIT_1_INIT_GENERIC_MASK;
u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
tmp = (tmp & ~mask) | ((val << shift) & mask);
writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
}
static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val)
{
u32 tmp, mask = RGR1_SW_INIT_1_INIT_7278_MASK;
u32 shift = RGR1_SW_INIT_1_INIT_7278_SHIFT;
tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
tmp = (tmp & ~mask) | ((val << shift) & mask);
writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
}
static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val)
{
if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n"))
return;
if (val)
reset_control_assert(pcie->perst_reset);
else
reset_control_deassert(pcie->perst_reset);
}
static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val)
{
u32 tmp;
/* Perst bit has moved and assert value is 0 */
tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL);
u32p_replace_bits(&tmp, !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK);
writel(tmp, pcie->base + PCIE_MISC_PCIE_CTRL);
}
static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val)
{
u32 tmp;
tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
}
static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
u64 *rc_bar2_size,
u64 *rc_bar2_offset)
{
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
struct resource_entry *entry;
struct device *dev = pcie->dev;
u64 lowest_pcie_addr = ~(u64)0;
int ret, i = 0;
u64 size = 0;
resource_list_for_each_entry(entry, &bridge->dma_ranges) {
u64 pcie_beg = entry->res->start - entry->offset;
size += entry->res->end - entry->res->start + 1;
if (pcie_beg < lowest_pcie_addr)
lowest_pcie_addr = pcie_beg;
}
if (lowest_pcie_addr == ~(u64)0) {
dev_err(dev, "DT node has no dma-ranges\n");
return -EINVAL;
}
ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
PCIE_BRCM_MAX_MEMC);
if (ret <= 0) {
/* Make an educated guess */
pcie->num_memc = 1;
pcie->memc_size[0] = 1ULL << fls64(size - 1);
} else {
pcie->num_memc = ret;
}
/* Each memc is viewed through a "port" that is a power of 2 */
for (i = 0, size = 0; i < pcie->num_memc; i++)
size += pcie->memc_size[i];
/* System memory starts at this address in PCIe-space */
*rc_bar2_offset = lowest_pcie_addr;
/* The sum of all memc views must also be a power of 2 */
*rc_bar2_size = 1ULL << fls64(size - 1);
/*
* We validate the inbound memory view even though we should trust
* whatever the device-tree provides. This is because of an HW issue on
* early Raspberry Pi 4's revisions (bcm2711). It turns out its
* firmware has to dynamically edit dma-ranges due to a bug on the
* PCIe controller integration, which prohibits any access above the
* lower 3GB of memory. Given this, we decided to keep the dma-ranges
* in check, avoiding hard to debug device-tree related issues in the
* future:
*
* The PCIe host controller by design must set the inbound viewport to
* be a contiguous arrangement of all of the system's memory. In
* addition, its size mut be a power of two. To further complicate
* matters, the viewport must start on a pcie-address that is aligned
* on a multiple of its size. If a portion of the viewport does not
* represent system memory -- e.g. 3GB of memory requires a 4GB
* viewport -- we can map the outbound memory in or after 3GB and even
* though the viewport will overlap the outbound memory the controller
* will know to send outbound memory downstream and everything else
* upstream.
*
* For example:
*
* - The best-case scenario, memory up to 3GB, is to place the inbound
* region in the first 4GB of pcie-space, as some legacy devices can
* only address 32bits. We would also like to put the MSI under 4GB
* as well, since some devices require a 32bit MSI target address.
*
* - If the system memory is 4GB or larger we cannot start the inbound
* region at location 0 (since we have to allow some space for
* outbound memory @ 3GB). So instead it will start at the 1x
* multiple of its size
*/
if (!*rc_bar2_size || (*rc_bar2_offset & (*rc_bar2_size - 1)) ||
(*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) {
dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n",
*rc_bar2_size, *rc_bar2_offset);
return -EINVAL;
}
return 0;
}
static int brcm_pcie_setup(struct brcm_pcie *pcie)
{
u64 rc_bar2_offset, rc_bar2_size;
void __iomem *base = pcie->base;
int ret, memc;
u32 tmp, burst, aspm_support;
/* Reset the bridge */
pcie->bridge_sw_init_set(pcie, 1);
usleep_range(100, 200);
/* Take the bridge out of reset */
pcie->bridge_sw_init_set(pcie, 0);
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
if (is_bmips(pcie))
tmp &= ~PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
else
tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
/* Wait for SerDes to be stable */
usleep_range(100, 200);
/*
* SCB_MAX_BURST_SIZE is a two bit field. For GENERIC chips it
* is encoded as 0=128, 1=256, 2=512, 3=Rsvd, for BCM7278 it
* is encoded as 0=Rsvd, 1=128, 2=256, 3=512.
*/
if (is_bmips(pcie))
burst = 0x1; /* 256 bytes */
else if (pcie->type == BCM2711)
burst = 0x0; /* 128 bytes */
else if (pcie->type == BCM7278)
burst = 0x3; /* 512 bytes */
else
burst = 0x2; /* 512 bytes */
/* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
tmp = readl(base + PCIE_MISC_MISC_CTRL);
u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK);
u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK);
u32p_replace_bits(&tmp, burst, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK);
writel(tmp, base + PCIE_MISC_MISC_CTRL);
ret = brcm_pcie_get_rc_bar2_size_and_offset(pcie, &rc_bar2_size,
&rc_bar2_offset);
if (ret)
return ret;
tmp = lower_32_bits(rc_bar2_offset);
u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size),
PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK);
writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
writel(upper_32_bits(rc_bar2_offset),
base + PCIE_MISC_RC_BAR2_CONFIG_HI);
tmp = readl(base + PCIE_MISC_MISC_CTRL);
for (memc = 0; memc < pcie->num_memc; memc++) {
u32 scb_size_val = ilog2(pcie->memc_size[memc]) - 15;
if (memc == 0)
u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(0));
else if (memc == 1)
u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(1));
else if (memc == 2)
u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(2));
}
writel(tmp, base + PCIE_MISC_MISC_CTRL);
/*
* We ideally want the MSI target address to be located in the 32bit
* addressable memory area. Some devices might depend on it. This is
* possible either when the inbound window is located above the lower
* 4GB or when the inbound area is smaller than 4GB (taking into
* account the rounding-up we're forced to perform).
*/
if (rc_bar2_offset >= SZ_4G || (rc_bar2_size + rc_bar2_offset) < SZ_4G)
pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB;
else
pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB;
/* disable the PCIe->GISB memory window (RC_BAR1) */
tmp = readl(base + PCIE_MISC_RC_BAR1_CONFIG_LO);
tmp &= ~PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK;
writel(tmp, base + PCIE_MISC_RC_BAR1_CONFIG_LO);
/* disable the PCIe->SCB memory window (RC_BAR3) */
tmp = readl(base + PCIE_MISC_RC_BAR3_CONFIG_LO);
tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK;
writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO);
if (pcie->gen)
brcm_pcie_set_gen(pcie, pcie->gen);
/* Don't advertise L0s capability if 'aspm-no-l0s' */
aspm_support = PCIE_LINK_STATE_L1;
if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
aspm_support |= PCIE_LINK_STATE_L0S;
tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
u32p_replace_bits(&tmp, aspm_support,
PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
/*
* For config space accesses on the RC, show the right class for
* a PCIe-PCIe bridge (the default setting is to be EP mode).
*/
tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
u32p_replace_bits(&tmp, 0x060400,
PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
return 0;
}
static int brcm_pcie_linkup(struct brcm_pcie *pcie)
{
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
struct device *dev = pcie->dev;
void __iomem *base = pcie->base;
struct resource_entry *entry;
struct resource *res;
int num_out_wins = 0;
u16 nlw, cls, lnksta;
bool ssc_good = false;
u32 tmp;
int ret, i;
/* Unassert the fundamental reset */
pcie->perst_set(pcie, 0);
/*
* Give the RC/EP time to wake up, before trying to configure RC.
* Intermittently check status for link-up, up to a total of 100ms.
*/
for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5)
msleep(5);
if (!brcm_pcie_link_up(pcie)) {
dev_err(dev, "link down\n");
return -ENODEV;
}
if (!brcm_pcie_rc_mode(pcie)) {
dev_err(dev, "PCIe misconfigured; is in EP mode\n");
return -EINVAL;
}
resource_list_for_each_entry(entry, &bridge->windows) {
res = entry->res;
if (resource_type(res) != IORESOURCE_MEM)
continue;
if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) {
dev_err(pcie->dev, "too many outbound wins\n");
return -EINVAL;
}
if (is_bmips(pcie)) {
u64 start = res->start;
unsigned int j, nwins = resource_size(res) / SZ_128M;
/* bmips PCIe outbound windows have a 128MB max size */
if (nwins > BRCM_NUM_PCIE_OUT_WINS)
nwins = BRCM_NUM_PCIE_OUT_WINS;
for (j = 0; j < nwins; j++, start += SZ_128M)
brcm_pcie_set_outbound_win(pcie, j, start,
start - entry->offset,
SZ_128M);
break;
}
brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start,
res->start - entry->offset,
resource_size(res));
num_out_wins++;
}
if (pcie->ssc) {
ret = brcm_pcie_set_ssc(pcie);
if (ret == 0)
ssc_good = true;
else
dev_err(dev, "failed attempt to enter ssc mode\n");
}
lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta);
nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
dev_info(dev, "link up, %s x%u %s\n",
pci_speed_string(pcie_link_speed[cls]), nlw,
ssc_good ? "(SSC)" : "(!SSC)");
/* PCIe->SCB endian mode for BAR */
tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN,
PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK);
writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
/*
* Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
* is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
*/
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
return 0;
}
/* L23 is a low-power PCIe link state */
static void brcm_pcie_enter_l23(struct brcm_pcie *pcie)
{
void __iomem *base = pcie->base;
int l23, i;
u32 tmp;
/* Assert request for L23 */
tmp = readl(base + PCIE_MISC_PCIE_CTRL);
u32p_replace_bits(&tmp, 1, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK);
writel(tmp, base + PCIE_MISC_PCIE_CTRL);
/* Wait up to 36 msec for L23 */
tmp = readl(base + PCIE_MISC_PCIE_STATUS);
l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, tmp);
for (i = 0; i < 15 && !l23; i++) {
usleep_range(2000, 2400);
tmp = readl(base + PCIE_MISC_PCIE_STATUS);
l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK,
tmp);
}
if (!l23)
dev_err(pcie->dev, "failed to enter low-power link state\n");
}
static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
{
static const u32 shifts[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT,
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT,
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT,};
static const u32 masks[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK,
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK,
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK,};
const int beg = start ? 0 : PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS - 1;
const int end = start ? PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS : -1;
u32 tmp, combined_mask = 0;
u32 val;
void __iomem *base = pcie->base;
int i, ret;
for (i = beg; i != end; start ? i++ : i--) {
val = start ? BIT_MASK(shifts[i]) : 0;
tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
tmp = (tmp & ~masks[i]) | (val & masks[i]);
writel(tmp, base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
usleep_range(50, 200);
combined_mask |= masks[i];
}
tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
val = start ? combined_mask : 0;
ret = (tmp & combined_mask) == val ? 0 : -EIO;
if (ret)
dev_err(pcie->dev, "failed to %s phy\n", (start ? "start" : "stop"));
return ret;
}
static inline int brcm_phy_start(struct brcm_pcie *pcie)
{
return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
}
static inline int brcm_phy_stop(struct brcm_pcie *pcie)
{
return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
}
static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
{
void __iomem *base = pcie->base;
int tmp;
if (brcm_pcie_link_up(pcie))
brcm_pcie_enter_l23(pcie);
/* Assert fundamental reset */
pcie->perst_set(pcie, 1);
/* Deassert request for L23 in case it was asserted */
tmp = readl(base + PCIE_MISC_PCIE_CTRL);
u32p_replace_bits(&tmp, 0, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK);
writel(tmp, base + PCIE_MISC_PCIE_CTRL);
/* Turn off SerDes */
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
/* Shutdown PCIe bridge */
pcie->bridge_sw_init_set(pcie, 1);
}
static int pci_dev_may_wakeup(struct pci_dev *dev, void *data)
{
bool *ret = data;
if (device_may_wakeup(&dev->dev)) {
*ret = true;
dev_info(&dev->dev, "disable cancelled for wake-up device\n");
}
return (int) *ret;
}
static int brcm_pcie_suspend(struct device *dev)
{
struct brcm_pcie *pcie = dev_get_drvdata(dev);
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
int ret;
brcm_pcie_turn_off(pcie);
/*
* If brcm_phy_stop() returns an error, just dev_err(). If we
* return the error it will cause the suspend to fail and this is a
* forgivable offense that will probably be erased on resume.
*/
if (brcm_phy_stop(pcie))
dev_err(dev, "Could not stop phy for suspend\n");
ret = reset_control_rearm(pcie->rescal);
if (ret) {
dev_err(dev, "Could not rearm rescal reset\n");
return ret;
}
if (pcie->sr) {
/*
* Now turn off the regulators, but if at least one
* downstream device is enabled as a wake-up source, do not
* turn off regulators.
*/
pcie->ep_wakeup_capable = false;
pci_walk_bus(bridge->bus, pci_dev_may_wakeup,
&pcie->ep_wakeup_capable);
if (!pcie->ep_wakeup_capable) {
ret = regulator_bulk_disable(pcie->sr->num_supplies,
pcie->sr->supplies);
if (ret) {
dev_err(dev, "Could not turn off regulators\n");
reset_control_reset(pcie->rescal);
return ret;
}
}
}
clk_disable_unprepare(pcie->clk);
return 0;
}
static int brcm_pcie_resume(struct device *dev)
{
struct brcm_pcie *pcie = dev_get_drvdata(dev);
void __iomem *base;
u32 tmp;
int ret;
base = pcie->base;
ret = clk_prepare_enable(pcie->clk);
if (ret)
return ret;
if (pcie->sr) {
if (pcie->ep_wakeup_capable) {
/*
* We are resuming from a suspend. In the suspend we
* did not disable the power supplies, so there is
* no need to enable them (and falsely increase their
* usage count).
*/
pcie->ep_wakeup_capable = false;
} else {
ret = regulator_bulk_enable(pcie->sr->num_supplies,
pcie->sr->supplies);
if (ret) {
dev_err(dev, "Could not turn on regulators\n");
goto err_disable_clk;
}
}
}
ret = reset_control_reset(pcie->rescal);
if (ret)
goto err_regulator;
ret = brcm_phy_start(pcie);
if (ret)
goto err_reset;
/* Take bridge out of reset so we can access the SERDES reg */
pcie->bridge_sw_init_set(pcie, 0);
/* SERDES_IDDQ = 0 */
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
u32p_replace_bits(&tmp, 0, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
/* wait for serdes to be stable */
udelay(100);
ret = brcm_pcie_setup(pcie);
if (ret)
goto err_reset;
ret = brcm_pcie_linkup(pcie);
if (ret)
goto err_reset;
if (pcie->msi)
brcm_msi_set_regs(pcie->msi);
return 0;
err_reset:
reset_control_rearm(pcie->rescal);
err_regulator:
if (pcie->sr)
regulator_bulk_disable(pcie->sr->num_supplies, pcie->sr->supplies);
err_disable_clk:
clk_disable_unprepare(pcie->clk);
return ret;
}
static void __brcm_pcie_remove(struct brcm_pcie *pcie)
{
brcm_msi_remove(pcie);
brcm_pcie_turn_off(pcie);
if (brcm_phy_stop(pcie))
dev_err(pcie->dev, "Could not stop phy\n");
if (reset_control_rearm(pcie->rescal))
dev_err(pcie->dev, "Could not rearm rescal reset\n");
clk_disable_unprepare(pcie->clk);
}
static int brcm_pcie_remove(struct platform_device *pdev)
{
struct brcm_pcie *pcie = platform_get_drvdata(pdev);
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
pci_stop_root_bus(bridge->bus);
pci_remove_root_bus(bridge->bus);
__brcm_pcie_remove(pcie);
return 0;
}
static const struct of_device_id brcm_pcie_match[] = {
{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
{ .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
{ .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
{ .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg },
{ .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg },
{},
};
static int brcm_pcie_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node, *msi_np;
struct pci_host_bridge *bridge;
const struct pcie_cfg_data *data;
struct brcm_pcie *pcie;
int ret;
bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
if (!bridge)
return -ENOMEM;
data = of_device_get_match_data(&pdev->dev);
if (!data) {
pr_err("failed to look up compatible string\n");
return -EINVAL;
}
pcie = pci_host_bridge_priv(bridge);
pcie->dev = &pdev->dev;
pcie->np = np;
pcie->reg_offsets = data->offsets;
pcie->type = data->type;
pcie->perst_set = data->perst_set;
pcie->bridge_sw_init_set = data->bridge_sw_init_set;
pcie->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pcie->base))
return PTR_ERR(pcie->base);
pcie->clk = devm_clk_get_optional(&pdev->dev, "sw_pcie");
if (IS_ERR(pcie->clk))
return PTR_ERR(pcie->clk);
ret = of_pci_get_max_link_speed(np);
pcie->gen = (ret < 0) ? 0 : ret;
pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc");
ret = clk_prepare_enable(pcie->clk);
if (ret) {
dev_err(&pdev->dev, "could not enable clock\n");
return ret;
}
pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
if (IS_ERR(pcie->rescal)) {
clk_disable_unprepare(pcie->clk);
return PTR_ERR(pcie->rescal);
}
pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
if (IS_ERR(pcie->perst_reset)) {
clk_disable_unprepare(pcie->clk);
return PTR_ERR(pcie->perst_reset);
}
ret = reset_control_reset(pcie->rescal);
if (ret)
dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
ret = brcm_phy_start(pcie);
if (ret) {
reset_control_rearm(pcie->rescal);
clk_disable_unprepare(pcie->clk);
return ret;
}
ret = brcm_pcie_setup(pcie);
if (ret)
goto fail;
pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
ret = -ENODEV;
goto fail;
}
msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
if (pci_msi_enabled() && msi_np == pcie->np) {
ret = brcm_pcie_enable_msi(pcie);
if (ret) {
dev_err(pcie->dev, "probe of internal MSI failed");
goto fail;
}
}
bridge->ops = pcie->type == BCM7425 ? &brcm_pcie_ops32 : &brcm_pcie_ops;
bridge->sysdata = pcie;
platform_set_drvdata(pdev, pcie);
ret = pci_host_probe(bridge);
if (!ret && !brcm_pcie_link_up(pcie))
ret = -ENODEV;
if (ret) {
brcm_pcie_remove(pdev);
return ret;
}
return 0;
fail:
__brcm_pcie_remove(pcie);
return ret;
}
MODULE_DEVICE_TABLE(of, brcm_pcie_match);
static const struct dev_pm_ops brcm_pcie_pm_ops = {
.suspend_noirq = brcm_pcie_suspend,
.resume_noirq = brcm_pcie_resume,
};
static struct platform_driver brcm_pcie_driver = {
.probe = brcm_pcie_probe,
.remove = brcm_pcie_remove,
.driver = {
.name = "brcm-pcie",
.of_match_table = brcm_pcie_match,
.pm = &brcm_pcie_pm_ops,
},
};
module_platform_driver(brcm_pcie_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Broadcom STB PCIe RC driver");
MODULE_AUTHOR("Broadcom");