Sekhar Nori 5b5052e32d davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h ... Leave a comment explaining the constant value of 27Mhz used in include/mach/timex.h for all DaVinci platforms. Many of the platforms actually run at 24MHz timer frequency (Eg. EVMs of DM355, DM365 and OMAP-L1). The comment also serves as a porting alert. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>		2010-02-04 13:29:41 -08:00
..
include/mach	davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h	2010-02-04 13:29:41 -08:00
board-da830-evm.c	davinci: da8xx/omapl1: add support for the second sysconfig module	2010-02-04 13:29:32 -08:00
board-da850-evm.c	davinci: da8xx/omapl1: add support for the second sysconfig module	2010-02-04 13:29:32 -08:00
board-dm355-evm.c	Davinci VPFE Capture: Take i2c adapter id through platform data	2010-01-06 08:57:43 -08:00
board-dm355-leopard.c	DaVinci: rename setup_usb() to davinci_setup_usb()	2009-11-25 10:21:33 -08:00
board-dm365-evm.c	DaVinci - Adding platform & board changes for vpfe capture on DM365	2010-02-04 13:28:46 -08:00
board-dm644x-evm.c	Davinci VPFE Capture: Take i2c adapter id through platform data	2010-01-06 08:57:43 -08:00
board-dm646x-evm.c	davinci: fix section mismatch warning in arch/arm/mach-davinci/board-dm646x-evm.c	2009-11-25 10:21:38 -08:00
board-neuros-osd2.c	davinci: Initial support for Neuros OSD2 platform.	2009-11-25 10:21:39 -08:00
board-sffsdr.c	davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c	2009-11-25 10:21:38 -08:00
clock.c	davinci: move PLL wait time values to clock.h	2010-02-04 13:29:33 -08:00
clock.h	davinci: make it possible to include clock.h and psc.h in assembly code	2010-02-04 13:29:37 -08:00
common.c	davinci: make it easier to identify SoC init failures	2009-11-25 10:21:31 -08:00
cp_intc.c	davinci: cp_intc: provide set_wake function	2010-01-06 08:57:44 -08:00
cpufreq.c	davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator	2009-11-25 10:21:37 -08:00
cpuidle.c	davinci: cpuidle: move mapping of DDR2 controller registers out of driver	2010-02-04 13:29:38 -08:00
da830.c	davinci: da8xx/omapl1: add support for the second sysconfig module	2010-02-04 13:29:32 -08:00
da850.c	davinci: da850/omap-l138: create static map for SRAM	2010-02-04 13:29:40 -08:00
devices-da8xx.c	davinci: cpuidle: move mapping of DDR2 controller registers out of driver	2010-02-04 13:29:38 -08:00
devices.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
dm355.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
dm365.c	DaVinci - Adding platform & board changes for vpfe capture on DM365	2010-02-04 13:28:46 -08:00
dm644x.c	davinci: Initial support for Neuros OSD2 platform.	2009-11-25 10:21:39 -08:00
dm646x.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
dma.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
gpio.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
io.c	davinci: Encapsulate SoC-specific data in a structure	2009-05-26 08:14:04 -07:00
irq.c	davinci: Move interrupt ctlr info to SoC infrastructure	2009-05-26 08:18:09 -07:00
Kconfig	davinci: Initial support for Neuros OSD2 platform.	2009-11-25 10:21:39 -08:00
Makefile	davinci: Initial support for Neuros OSD2 platform.	2009-11-25 10:21:39 -08:00
Makefile.boot	davinci: da8xx: Add base DA830/OMAP-L137 SoC support	2009-08-26 10:56:59 +03:00
mux.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
mux.h	davinci: update pin-multiplexing support	2009-04-27 09:49:46 -07:00
psc.c	davinci: move PSC register definitions from psc.c to psc.h	2010-02-04 13:29:36 -08:00
serial.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
sram.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
time.c	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
usb.c	DA8xx: MUSB platform device registration	2009-11-25 10:21:33 -08:00