mirror of
https://github.com/torvalds/linux.git
synced 2024-11-05 11:32:04 +00:00
6ab3d5624e
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
442 lines
12 KiB
C
442 lines
12 KiB
C
/*
|
|
* Copyright (c) 2005 Cisco Systems. All rights reserved.
|
|
* Roland Dreier <rolandd@cisco.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/reg.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ibm44x.h>
|
|
|
|
#include "ppc440spe_pcie.h"
|
|
|
|
static int
|
|
pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
|
int len, u32 *val)
|
|
{
|
|
struct pci_controller *hose = bus->sysdata;
|
|
|
|
if (PCI_SLOT(devfn) != 1)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
offset += devfn << 12;
|
|
|
|
/*
|
|
* Note: the caller has already checked that offset is
|
|
* suitably aligned and that len is 1, 2 or 4.
|
|
*/
|
|
switch (len) {
|
|
case 1:
|
|
*val = in_8(hose->cfg_data + offset);
|
|
break;
|
|
case 2:
|
|
*val = in_le16(hose->cfg_data + offset);
|
|
break;
|
|
default:
|
|
*val = in_le32(hose->cfg_data + offset);
|
|
break;
|
|
}
|
|
|
|
if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int
|
|
pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
|
int len, u32 val)
|
|
{
|
|
struct pci_controller *hose = bus->sysdata;
|
|
|
|
if (PCI_SLOT(devfn) != 1)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
offset += devfn << 12;
|
|
|
|
switch (len) {
|
|
case 1:
|
|
out_8(hose->cfg_data + offset, val);
|
|
break;
|
|
case 2:
|
|
out_le16(hose->cfg_data + offset, val);
|
|
break;
|
|
default:
|
|
out_le32(hose->cfg_data + offset, val);
|
|
break;
|
|
}
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops pcie_pci_ops =
|
|
{
|
|
.read = pcie_read_config,
|
|
.write = pcie_write_config
|
|
};
|
|
|
|
enum {
|
|
PTYPE_ENDPOINT = 0x0,
|
|
PTYPE_LEGACY_ENDPOINT = 0x1,
|
|
PTYPE_ROOT_PORT = 0x4,
|
|
|
|
LNKW_X1 = 0x1,
|
|
LNKW_X4 = 0x4,
|
|
LNKW_X8 = 0x8
|
|
};
|
|
|
|
static void check_error(void)
|
|
{
|
|
u32 valPE0, valPE1, valPE2;
|
|
|
|
/* SDR0_PEGPLLLCT1 reset */
|
|
if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
|
|
printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
|
|
}
|
|
|
|
valPE0 = SDR_READ(PESDR0_RCSSET);
|
|
valPE1 = SDR_READ(PESDR1_RCSSET);
|
|
valPE2 = SDR_READ(PESDR2_RCSSET);
|
|
|
|
/* SDR0_PExRCSSET rstgu */
|
|
if ( !(valPE0 & 0x01000000) ||
|
|
!(valPE1 & 0x01000000) ||
|
|
!(valPE2 & 0x01000000)) {
|
|
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rstdl */
|
|
if ( !(valPE0 & 0x00010000) ||
|
|
!(valPE1 & 0x00010000) ||
|
|
!(valPE2 & 0x00010000)) {
|
|
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rstpyn */
|
|
if ( (valPE0 & 0x00001000) ||
|
|
(valPE1 & 0x00001000) ||
|
|
(valPE2 & 0x00001000)) {
|
|
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
|
|
}
|
|
|
|
/* SDR0_PExRCSSET hldplb */
|
|
if ( (valPE0 & 0x10000000) ||
|
|
(valPE1 & 0x10000000) ||
|
|
(valPE2 & 0x10000000)) {
|
|
printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rdy */
|
|
if ( (valPE0 & 0x00100000) ||
|
|
(valPE1 & 0x00100000) ||
|
|
(valPE2 & 0x00100000)) {
|
|
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
|
|
}
|
|
|
|
/* SDR0_PExRCSSET shutdown */
|
|
if ( (valPE0 & 0x00000100) ||
|
|
(valPE1 & 0x00000100) ||
|
|
(valPE2 & 0x00000100)) {
|
|
printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initialize PCI Express core as described in User Manual section 27.12.1
|
|
*/
|
|
int ppc440spe_init_pcie(void)
|
|
{
|
|
/* Set PLL clock receiver to LVPECL */
|
|
SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
|
|
|
|
check_error();
|
|
|
|
printk(KERN_INFO "PCIE initialization OK\n");
|
|
|
|
if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
|
|
printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
|
|
SDR_READ(PESDR0_PLLLCT2));
|
|
|
|
/* De-assert reset of PCIe PLL, wait for lock */
|
|
SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
|
|
udelay(3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ppc440spe_init_pcie_rootport(int port)
|
|
{
|
|
static int core_init;
|
|
void __iomem *utl_base;
|
|
u32 val = 0;
|
|
int i;
|
|
|
|
if (!core_init) {
|
|
++core_init;
|
|
i = ppc440spe_init_pcie();
|
|
if (i)
|
|
return i;
|
|
}
|
|
|
|
/*
|
|
* Initialize various parts of the PCI Express core for our port:
|
|
*
|
|
* - Set as a root port and enable max width
|
|
* (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
|
|
* - Set up UTL configuration.
|
|
* - Increase SERDES drive strength to levels suggested by AMCC.
|
|
* - De-assert RSTPYN, RSTDL and RSTGU.
|
|
*/
|
|
switch (port) {
|
|
case 0:
|
|
SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
|
|
|
|
SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
|
|
SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
|
|
|
|
SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
|
|
|
|
SDR_WRITE(PESDR0_RCSSET,
|
|
(SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
|
|
break;
|
|
|
|
case 1:
|
|
SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
|
|
|
|
SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
|
|
SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
|
|
|
|
SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
|
|
SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
|
|
SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
|
|
SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
|
|
|
|
SDR_WRITE(PESDR1_RCSSET,
|
|
(SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
|
|
break;
|
|
|
|
case 2:
|
|
SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
|
|
|
|
SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
|
|
SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
|
|
|
|
SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
|
|
SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
|
|
SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
|
|
SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
|
|
|
|
SDR_WRITE(PESDR2_RCSSET,
|
|
(SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
|
|
break;
|
|
}
|
|
|
|
mdelay(1000);
|
|
|
|
switch (port) {
|
|
case 0: val = SDR_READ(PESDR0_RCSSTS); break;
|
|
case 1: val = SDR_READ(PESDR1_RCSSTS); break;
|
|
case 2: val = SDR_READ(PESDR2_RCSSTS); break;
|
|
}
|
|
|
|
if (!(val & (1 << 20)))
|
|
printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
|
|
else
|
|
printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
|
|
|
|
switch (port) {
|
|
case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
|
|
case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
|
|
case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
|
|
}
|
|
|
|
/*
|
|
* Map UTL registers at 0xc_1000_0n00
|
|
*/
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
|
|
break;
|
|
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
|
|
break;
|
|
|
|
case 2:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
|
|
}
|
|
|
|
utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
|
|
|
|
/*
|
|
* Set buffer allocations and then assert VRB and TXE.
|
|
*/
|
|
out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
|
|
out_be32(utl_base + PEUTL_INTR, 0x02000000);
|
|
out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
|
|
out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
|
|
out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
|
|
out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
|
|
out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
|
|
out_be32(utl_base + PEUTL_PCTL, 0x80800066);
|
|
|
|
iounmap(utl_base);
|
|
|
|
/*
|
|
* We map PCI Express configuration access into the 512MB regions
|
|
* PCIE0: 0xc_4000_0000
|
|
* PCIE1: 0xc_8000_0000
|
|
* PCIE2: 0xc_c000_0000
|
|
*/
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
|
|
mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
|
|
break;
|
|
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
|
|
mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
|
|
break;
|
|
|
|
case 2:
|
|
mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
|
|
mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Check for VC0 active and assert RDY.
|
|
*/
|
|
switch (port) {
|
|
case 0:
|
|
if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
|
|
printk(KERN_WARNING "PCIE0: VC0 not active\n");
|
|
SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
|
|
break;
|
|
case 1:
|
|
if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
|
|
printk(KERN_WARNING "PCIE0: VC0 not active\n");
|
|
SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
|
|
break;
|
|
case 2:
|
|
if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
|
|
printk(KERN_WARNING "PCIE0: VC0 not active\n");
|
|
SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
|
|
break;
|
|
}
|
|
|
|
#if 0
|
|
/* Dump all config regs */
|
|
for (i = 0x300; i <= 0x320; ++i)
|
|
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
|
for (i = 0x340; i <= 0x353; ++i)
|
|
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
|
for (i = 0x370; i <= 0x383; ++i)
|
|
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
|
for (i = 0x3a0; i <= 0x3a2; ++i)
|
|
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
|
for (i = 0x3c0; i <= 0x3c3; ++i)
|
|
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
|
#endif
|
|
|
|
mdelay(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
|
|
{
|
|
void __iomem *mbase;
|
|
|
|
/*
|
|
* Map 16MB, which is enough for 4 bits of bus #
|
|
*/
|
|
hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
|
|
1 << 24);
|
|
hose->ops = &pcie_pci_ops;
|
|
|
|
/*
|
|
* Set bus numbers on our root port
|
|
*/
|
|
mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
|
|
out_8(mbase + PCI_PRIMARY_BUS, 0);
|
|
out_8(mbase + PCI_SECONDARY_BUS, 0);
|
|
|
|
/*
|
|
* Set up outbound translation to hose->mem_space from PLB
|
|
* addresses at an offset of 0xd_0000_0000. We set the low
|
|
* bits of the mask to 11 to turn off splitting into 8
|
|
* subregions and to enable the outbound translation.
|
|
*/
|
|
out_le32(mbase + PECFG_POM0LAH, 0);
|
|
out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), hose->mem_space.start);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
|
|
~(hose->mem_space.end - hose->mem_space.start) | 3);
|
|
break;
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), hose->mem_space.start);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
|
|
~(hose->mem_space.end - hose->mem_space.start) | 3);
|
|
|
|
break;
|
|
case 2:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), hose->mem_space.start);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
|
|
~(hose->mem_space.end - hose->mem_space.start) | 3);
|
|
break;
|
|
}
|
|
|
|
/* Set up 16GB inbound memory window at 0 */
|
|
out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
|
|
out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
|
|
out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
|
|
out_le32(mbase + PECFG_BAR0LMPA, 0);
|
|
out_le32(mbase + PECFG_PIM0LAL, 0);
|
|
out_le32(mbase + PECFG_PIM0LAH, 0);
|
|
out_le32(mbase + PECFG_PIMEN, 0x1);
|
|
|
|
/* Enable I/O, Mem, and Busmaster cycles */
|
|
out_le16(mbase + PCI_COMMAND,
|
|
in_le16(mbase + PCI_COMMAND) |
|
|
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
|
|
iounmap(mbase);
|
|
}
|