linux/arch/powerpc/sysdev
David Gibson 22258fa40e [POWERPC] Enable RTC for Ebony and Walnut (v2)
This patch extends the Ebony and Walnut platform code to instantiate
the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip
found on both those boards.  The patch uses a helper function to scan
the device tree and instantiate the appropriate platform_device based
on it, so it should be easy to extend for other boards which have mmio
mapped RTC chips.

Along with this, the device tree binding for the ds1743 chips is
tweaked, based on the existing DS1385 OF binding found at:
	http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt
Although that document covers the NVRAM portion of the chip, whereas
here we're interested in the RTC portion, so it's not entirely clear
if that's a good model.

This implements only RTC class driver support - that is /dev/rtc0, not
/dev/rtc, and the low-level get/set time callbacks remain
unimplemented.  That means in order to get at the clock you will
either need a modified version of hwclock which will look at
/dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25 07:07:26 -06:00
..
bestcomm [POWERPC] arch/powerpc/: Spelling fixes 2007-12-20 16:15:51 +11:00
qe_lib [POWERPC] QE: Add support for Freescale QUICCEngine UART 2008-01-23 19:34:10 -06:00
axonram.c [POWERPC] Clean out asm/of_{platform, device}.h from sysdev/ 2007-12-06 14:44:30 +11:00
commproc.c [POWERPC] Move CPM command handling into the cpm drivers 2007-12-13 22:47:16 -06:00
commproc.h [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
cpm2_common.c Merge branch 'linux-2.6' 2007-12-21 22:21:08 +11:00
cpm2_pic.c [POWERPC] cpm2: Infrastructure code cleanup. 2007-10-04 11:02:04 -05:00
cpm2_pic.h [POWERPC] cpm2: CPM2 interrupt controller fix 2007-02-07 14:03:20 +11:00
cpm_common.c [POWERPC] cpm: Fix a couple minor issues in cpm_common.c. 2007-11-09 03:47:44 -06:00
dart_iommu.c [POWERPC] Fix section mismatch in dart_iommu.c 2007-08-17 11:02:06 +10:00
dart.h [POWERPC] Use 4kB iommu pages even on 64kB-page systems 2006-11-01 14:52:48 +11:00
dcr-low.S [POWERPC] Generic DCR infrastructure 2006-12-04 16:08:25 +11:00
dcr.c Use dcr_host_t.base in dcr_unmap() 2007-10-15 14:29:49 -04:00
fsl_pci.c [POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx 2008-01-23 19:31:16 -06:00
fsl_pci.h [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected 2007-07-23 10:27:08 -05:00
fsl_rio.c [POWERPC] Move RapidIO support code from arch/ppc 2008-01-23 19:35:15 -06:00
fsl_rio.h [POWERPC] Move RapidIO support code from arch/ppc 2008-01-23 19:35:15 -06:00
fsl_soc.c [POWERPC] fsl_soc: Fix get_immrbase() to use ranges, rather than reg. 2008-01-23 19:34:33 -06:00
fsl_soc.h [POWERPC] 85xx/86xx: refactor RSTCR reset code 2007-10-08 08:38:47 -05:00
grackle.c [POWERPC] pci32: Add flags modifying the PCI code behaviour 2007-12-20 16:18:07 +11:00
i8259.c [POWERPC] i8259: Add disable method 2007-11-08 14:15:29 +11:00
indirect_pci.c [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci 2007-10-12 14:05:17 +10:00
ipic.c [POWERPC] Add support for mpc512x interrupts to ipic 2008-01-23 19:34:24 -06:00
ipic.h [POWERPC] ipic: ack only for edge interrupts 2007-12-12 01:53:07 -06:00
Kconfig [POWERPC] 4xx: PLB to PCI Express support 2007-12-23 13:12:34 -06:00
Makefile [POWERPC] Enable RTC for Ebony and Walnut (v2) 2008-01-25 07:07:26 -06:00
micropatch.c [POWERPC] 8xx: powerpc port of core CPM PIC 2007-02-07 14:03:17 +11:00
mmio_nvram.c [POWERPC] arch/powerpc/: Spelling fixes 2007-12-20 16:15:51 +11:00
mpc8xx_pic.c [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
mpc8xx_pic.h [POWERPC] 8xx: mpc885ads pcmcia support 2007-07-10 00:33:51 -05:00
mpic_msi.c [POWERPC] Fix section mismatch in PCI code 2007-09-19 15:25:34 +10:00
mpic_pasemi_msi.c [POWERPC] pasemi: Implement MSI support 2007-12-20 16:15:23 +11:00
mpic_u3msi.c [POWERPC] Inline u3msi_compose_msi_msg() 2007-10-03 09:11:42 +10:00
mpic.c [POWERPC] Fixup use of phys_addr_t in mpic code 2008-01-23 19:32:33 -06:00
mpic.h [POWERPC] pasemi: Implement NMI support 2007-12-28 09:22:24 -06:00
mv64x60_dev.c [POWERPC] Use for_each macros in arch/powerpc/sysdev 2008-01-17 14:56:54 +11:00
mv64x60_pci.c [POWERPC] Use for_each macros in arch/powerpc/sysdev 2008-01-17 14:56:54 +11:00
mv64x60_pic.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
mv64x60_udbg.c [POWERPC] Use for_each macros in arch/powerpc/sysdev 2008-01-17 14:56:54 +11:00
mv64x60.h [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
of_rtc.c [POWERPC] Enable RTC for Ebony and Walnut (v2) 2008-01-25 07:07:26 -06:00
pmi.c [POWERPC] Clean out asm/of_{platform, device}.h from sysdev/ 2007-12-06 14:44:30 +11:00
ppc4xx_pci.c [POWERPC] 4xx: PCIe: Increase max busses per port to 64 2008-01-08 08:05:23 -06:00
ppc4xx_pci.h [POWERPC] 4xx: PCI-E Link setup improvements 2007-12-23 13:18:49 -06:00
rtc_cmos_setup.c [POWERPC] Add interrupt resource for RTC CMOS driver 2007-08-17 13:18:58 -05:00
tsi108_dev.c [POWERPC] Use for_each macros in arch/powerpc/sysdev 2008-01-17 14:56:54 +11:00
tsi108_pci.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
uic.c [POWERPC] Use for_each macros in arch/powerpc/sysdev 2008-01-17 14:56:54 +11:00
xilinx_intc.c [POWERPC] Xilinx: update compatible list for interrupt controller 2008-01-09 07:48:31 -07:00