Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-08 05:01:48 +00:00
Code Issues Packages Projects Releases Wiki Activity
561c673197
linux/arch/powerpc/perf/power5+-pmu.c
Michael Ellerman f2699491e0 powerpc/perf: Move perf core & PMU code into a subdirectory 
The perf code has grown a lot since it started, and is big enough to
warrant its own subdirectory. For reference it's ~60% bigger than the
oprofile code. It declutters the kernel directory, makes it simpler to
grep for "just perf stuff", and allows us to shorten some filenames.

While we're at it, make it more obvious that we have two implementations
of the core perf logic. One for (roughly) Book3S CPUs, which was the
original implementation, and the other for Freescale embedded CPUs.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-23 10:50:04 +11:00

691 lines
18 KiB
C
Raw Blame History

/*
* Performance counter support for POWER5+/++ (not POWER5) processors.
*
* Copyright 2009 Paul Mackerras, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/perf_event.h>
#include <linux/string.h>
#include <asm/reg.h>
#include <asm/cputable.h>
/*
* Bits in event code for POWER5+ (POWER5 GS) and POWER5++ (POWER5 GS DD3)
*/
#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */
#define PM_PMC_MSK 0xf
#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH)
#define PM_UNIT_SH 16 /* TTMMUX number and setting - unit select */
#define PM_UNIT_MSK 0xf
#define PM_BYTE_SH 12 /* Byte number of event bus to use */
#define PM_BYTE_MSK 7
#define PM_GRS_SH 8 /* Storage subsystem mux select */
#define PM_GRS_MSK 7
#define PM_BUSEVENT_MSK 0x80 /* Set if event uses event bus */
#define PM_PMCSEL_MSK 0x7f
/* Values in PM_UNIT field */
#define PM_FPU 0
#define PM_ISU0 1
#define PM_IFU 2
#define PM_ISU1 3
#define PM_IDU 4
#define PM_ISU0_ALT 6
#define PM_GRS 7
#define PM_LSU0 8
#define PM_LSU1 0xc
#define PM_LASTUNIT 0xc
/*
* Bits in MMCR1 for POWER5+
*/
#define MMCR1_TTM0SEL_SH 62
#define MMCR1_TTM1SEL_SH 60
#define MMCR1_TTM2SEL_SH 58
#define MMCR1_TTM3SEL_SH 56
#define MMCR1_TTMSEL_MSK 3
#define MMCR1_TD_CP_DBG0SEL_SH 54
#define MMCR1_TD_CP_DBG1SEL_SH 52
#define MMCR1_TD_CP_DBG2SEL_SH 50
#define MMCR1_TD_CP_DBG3SEL_SH 48
#define MMCR1_GRS_L2SEL_SH 46
#define MMCR1_GRS_L2SEL_MSK 3
#define MMCR1_GRS_L3SEL_SH 44
#define MMCR1_GRS_L3SEL_MSK 3
#define MMCR1_GRS_MCSEL_SH 41
#define MMCR1_GRS_MCSEL_MSK 7
#define MMCR1_GRS_FABSEL_SH 39
#define MMCR1_GRS_FABSEL_MSK 3
#define MMCR1_PMC1_ADDER_SEL_SH 35
#define MMCR1_PMC2_ADDER_SEL_SH 34
#define MMCR1_PMC3_ADDER_SEL_SH 33
#define MMCR1_PMC4_ADDER_SEL_SH 32
#define MMCR1_PMC1SEL_SH 25
#define MMCR1_PMC2SEL_SH 17
#define MMCR1_PMC3SEL_SH 9
#define MMCR1_PMC4SEL_SH 1
#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8)
#define MMCR1_PMCSEL_MSK 0x7f
/*
* Layout of constraint bits:
* 6666555555555544444444443333333333222222222211111111110000000000
* 3210987654321098765432109876543210987654321098765432109876543210
* [ ><><>< ><> <><>[ > < >< >< >< ><><><><><><>
* NC G0G1G2 G3 T0T1 UC B0 B1 B2 B3 P6P5P4P3P2P1
*
* NC - number of counters
* 51: NC error 0x0008_0000_0000_0000
* 48-50: number of events needing PMC1-4 0x0007_0000_0000_0000
*
* G0..G3 - GRS mux constraints
* 46-47: GRS_L2SEL value
* 44-45: GRS_L3SEL value
* 41-44: GRS_MCSEL value
* 39-40: GRS_FABSEL value
* Note that these match up with their bit positions in MMCR1
*
* T0 - TTM0 constraint
* 36-37: TTM0SEL value (0=FPU, 2=IFU, 3=ISU1) 0x30_0000_0000
*
* T1 - TTM1 constraint
* 34-35: TTM1SEL value (0=IDU, 3=GRS) 0x0c_0000_0000
*
* UC - unit constraint: can't have all three of FPU|IFU|ISU1, ISU0, IDU|GRS
* 33: UC3 error 0x02_0000_0000
* 32: FPU|IFU|ISU1 events needed 0x01_0000_0000
* 31: ISU0 events needed 0x01_8000_0000
* 30: IDU|GRS events needed 0x00_4000_0000
*
* B0
* 24-27: Byte 0 event source 0x0f00_0000
* Encoding as for the event code
*
* B1, B2, B3
* 20-23, 16-19, 12-15: Byte 1, 2, 3 event sources
*
* P6
* 11: P6 error 0x800
* 10-11: Count of events needing PMC6
*
* P1..P5
* 0-9: Count of events needing PMC1..PMC5
*/
static const int grsel_shift[8] = {
MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH,
MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH,
MMCR1_GRS_MCSEL_SH, MMCR1_GRS_FABSEL_SH
};
/* Masks and values for using events from the various units */
static unsigned long unit_cons[PM_LASTUNIT+1][2] = {
[PM_FPU] = { 0x3200000000ul, 0x0100000000ul },
[PM_ISU0] = { 0x0200000000ul, 0x0080000000ul },
[PM_ISU1] = { 0x3200000000ul, 0x3100000000ul },
[PM_IFU] = { 0x3200000000ul, 0x2100000000ul },
[PM_IDU] = { 0x0e00000000ul, 0x0040000000ul },
[PM_GRS] = { 0x0e00000000ul, 0x0c40000000ul },
};
static int power5p_get_constraint(u64 event, unsigned long *maskp,
unsigned long *valp)
{
int pmc, byte, unit, sh;
int bit, fmask;
unsigned long mask = 0, value = 0;
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
if (pmc > 6)
return -1;
sh = (pmc - 1) * 2;
mask |= 2 << sh;
value |= 1 << sh;
if (pmc >= 5 && !(event == 0x500009 || event == 0x600005))
return -1;
}
if (event & PM_BUSEVENT_MSK) {
unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
if (unit > PM_LASTUNIT)
return -1;
if (unit == PM_ISU0_ALT)
unit = PM_ISU0;
mask |= unit_cons[unit][0];
value |= unit_cons[unit][1];
byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
if (byte >= 4) {
if (unit != PM_LSU1)
return -1;
/* Map LSU1 low word (bytes 4-7) to unit LSU1+1 */
++unit;
byte &= 3;
}
if (unit == PM_GRS) {
bit = event & 7;
fmask = (bit == 6)? 7: 3;
sh = grsel_shift[bit];
mask |= (unsigned long)fmask << sh;
value |= (unsigned long)((event >> PM_GRS_SH) & fmask)
<< sh;
}
/* Set byte lane select field */
mask |= 0xfUL << (24 - 4 * byte);
value |= (unsigned long)unit << (24 - 4 * byte);
}
if (pmc < 5) {
/* need a counter from PMC1-4 set */
mask |= 0x8000000000000ul;
value |= 0x1000000000000ul;
}
*maskp = mask;
*valp = value;
return 0;
}
static int power5p_limited_pmc_event(u64 event)
{
int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
return pmc == 5 || pmc == 6;
}
#define MAX_ALT 3 /* at most 3 alternatives for any event */
static const unsigned int event_alternatives[][MAX_ALT] = {
{ 0x100c0, 0x40001f }, /* PM_GCT_FULL_CYC */
{ 0x120e4, 0x400002 }, /* PM_GRP_DISP_REJECT */
{ 0x230e2, 0x323087 }, /* PM_BR_PRED_CR */
{ 0x230e3, 0x223087, 0x3230a0 }, /* PM_BR_PRED_TA */
{ 0x410c7, 0x441084 }, /* PM_THRD_L2MISS_BOTH_CYC */
{ 0x800c4, 0xc20e0 }, /* PM_DTLB_MISS */
{ 0xc50c6, 0xc60e0 }, /* PM_MRK_DTLB_MISS */
{ 0x100005, 0x600005 }, /* PM_RUN_CYC */
{ 0x100009, 0x200009 }, /* PM_INST_CMPL */
{ 0x200015, 0x300015 }, /* PM_LSU_LMQ_SRQ_EMPTY_CYC */
{ 0x300009, 0x400009 }, /* PM_INST_DISP */
};
/*
* Scan the alternatives table for a match and return the
* index into the alternatives table if found, else -1.
*/
static int find_alternative(unsigned int event)
{
int i, j;
for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) {
if (event < event_alternatives[i][0])
break;
for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j)
if (event == event_alternatives[i][j])
return i;
}
return -1;
}
static const unsigned char bytedecode_alternatives[4][4] = {
/* PMC 1 */ { 0x21, 0x23, 0x25, 0x27 },
/* PMC 2 */ { 0x07, 0x17, 0x0e, 0x1e },
/* PMC 3 */ { 0x20, 0x22, 0x24, 0x26 },
/* PMC 4 */ { 0x07, 0x17, 0x0e, 0x1e }
};
/*
* Some direct events for decodes of event bus byte 3 have alternative
* PMCSEL values on other counters. This returns the alternative
* event code for those that do, or -1 otherwise. This also handles
* alternative PCMSEL values for add events.
*/
static s64 find_alternative_bdecode(u64 event)
{
int pmc, altpmc, pp, j;
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc == 0 || pmc > 4)
return -1;
altpmc = 5 - pmc; /* 1 <-> 4, 2 <-> 3 */
pp = event & PM_PMCSEL_MSK;
for (j = 0; j < 4; ++j) {
if (bytedecode_alternatives[pmc - 1][j] == pp) {
return (event & ~(PM_PMC_MSKS | PM_PMCSEL_MSK)) |
(altpmc << PM_PMC_SH) |
bytedecode_alternatives[altpmc - 1][j];
}
}
/* new decode alternatives for power5+ */
if (pmc == 1 && (pp == 0x0d || pp == 0x0e))
return event + (2 << PM_PMC_SH) + (0x2e - 0x0d);
if (pmc == 3 && (pp == 0x2e || pp == 0x2f))
return event - (2 << PM_PMC_SH) - (0x2e - 0x0d);
/* alternative add event encodings */
if (pp == 0x10 || pp == 0x28)
return ((event ^ (0x10 ^ 0x28)) & ~PM_PMC_MSKS) |
(altpmc << PM_PMC_SH);
return -1;
}
static int power5p_get_alternatives(u64 event, unsigned int flags, u64 alt[])
{
int i, j, nalt = 1;
int nlim;
s64 ae;
alt[0] = event;
nalt = 1;
nlim = power5p_limited_pmc_event(event);
i = find_alternative(event);
if (i >= 0) {
for (j = 0; j < MAX_ALT; ++j) {
ae = event_alternatives[i][j];
if (ae && ae != event)
alt[nalt++] = ae;
nlim += power5p_limited_pmc_event(ae);
}
} else {
ae = find_alternative_bdecode(event);
if (ae > 0)
alt[nalt++] = ae;
}
if (flags & PPMU_ONLY_COUNT_RUN) {
/*
* We're only counting in RUN state,
* so PM_CYC is equivalent to PM_RUN_CYC
* and PM_INST_CMPL === PM_RUN_INST_CMPL.
* This doesn't include alternatives that don't provide
* any extra flexibility in assigning PMCs (e.g.
* 0x100005 for PM_RUN_CYC vs. 0xf for PM_CYC).
* Note that even with these additional alternatives
* we never end up with more than 3 alternatives for any event.
*/
j = nalt;
for (i = 0; i < nalt; ++i) {
switch (alt[i]) {
case 0xf: /* PM_CYC */
alt[j++] = 0x600005; /* PM_RUN_CYC */
++nlim;
break;
case 0x600005: /* PM_RUN_CYC */
alt[j++] = 0xf;
break;
case 0x100009: /* PM_INST_CMPL */
alt[j++] = 0x500009; /* PM_RUN_INST_CMPL */
++nlim;
break;
case 0x500009: /* PM_RUN_INST_CMPL */
alt[j++] = 0x100009; /* PM_INST_CMPL */
alt[j++] = 0x200009;
break;
}
}
nalt = j;
}
if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) {
/* remove the limited PMC events */
j = 0;
for (i = 0; i < nalt; ++i) {
if (!power5p_limited_pmc_event(alt[i])) {
alt[j] = alt[i];
++j;
}
}
nalt = j;
} else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) {
/* remove all but the limited PMC events */
j = 0;
for (i = 0; i < nalt; ++i) {
if (power5p_limited_pmc_event(alt[i])) {
alt[j] = alt[i];
++j;
}
}
nalt = j;
}
return nalt;
}
/*
* Map of which direct events on which PMCs are marked instruction events.
* Indexed by PMCSEL value, bit i (LE) set if PMC i is a marked event.
* Bit 0 is set if it is marked for all PMCs.
* The 0x80 bit indicates a byte decode PMCSEL value.
*/
static unsigned char direct_event_is_marked[0x28] = {
0, /* 00 */
0x1f, /* 01 PM_IOPS_CMPL */
0x2, /* 02 PM_MRK_GRP_DISP */
0xe, /* 03 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */
0, /* 04 */
0x1c, /* 05 PM_MRK_BRU_FIN, PM_MRK_INST_FIN, PM_MRK_CRU_FIN */
0x80, /* 06 */
0x80, /* 07 */
0, 0, 0,/* 08 - 0a */
0x18, /* 0b PM_THRESH_TIMEO, PM_MRK_GRP_TIMEO */
0, /* 0c */
0x80, /* 0d */
0x80, /* 0e */
0, /* 0f */
0, /* 10 */
0x14, /* 11 PM_MRK_GRP_BR_REDIR, PM_MRK_GRP_IC_MISS */
0, /* 12 */
0x10, /* 13 PM_MRK_GRP_CMPL */
0x1f, /* 14 PM_GRP_MRK, PM_MRK_{FXU,FPU,LSU}_FIN */
0x2, /* 15 PM_MRK_GRP_ISSUED */
0x80, /* 16 */
0x80, /* 17 */
0, 0, 0, 0, 0,
0x80, /* 1d */
0x80, /* 1e */
0, /* 1f */
0x80, /* 20 */
0x80, /* 21 */
0x80, /* 22 */
0x80, /* 23 */
0x80, /* 24 */
0x80, /* 25 */
0x80, /* 26 */
0x80, /* 27 */
};
/*
* Returns 1 if event counts things relating to marked instructions
* and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
*/
static int power5p_marked_instr_event(u64 event)
{
int pmc, psel;
int bit, byte, unit;
u32 mask;
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
psel = event & PM_PMCSEL_MSK;
if (pmc >= 5)
return 0;
bit = -1;
if (psel < sizeof(direct_event_is_marked)) {
if (direct_event_is_marked[psel] & (1 << pmc))
return 1;
if (direct_event_is_marked[psel] & 0x80)
bit = 4;
else if (psel == 0x08)
bit = pmc - 1;
else if (psel == 0x10)
bit = 4 - pmc;
else if (psel == 0x1b && (pmc == 1 || pmc == 3))
bit = 4;
} else if ((psel & 0x48) == 0x40) {
bit = psel & 7;
} else if (psel == 0x28) {
bit = pmc - 1;
} else if (pmc == 3 && (psel == 0x2e || psel == 0x2f)) {
bit = 4;
}
if (!(event & PM_BUSEVENT_MSK) || bit == -1)
return 0;
byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
if (unit == PM_LSU0) {
/* byte 1 bits 0-7, byte 2 bits 0,2-4,6 */
mask = 0x5dff00;
} else if (unit == PM_LSU1 && byte >= 4) {
byte -= 4;
/* byte 5 bits 6-7, byte 6 bits 0,4, byte 7 bits 0-4,6 */
mask = 0x5f11c000;
} else
return 0;
return (mask >> (byte * 8 + bit)) & 1;
}
static int power5p_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], unsigned long mmcr[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = 0;
unsigned int pmc, unit, byte, psel;
unsigned int ttm;
int i, isbus, bit, grsel;
unsigned int pmc_inuse = 0;
unsigned char busbyte[4];
unsigned char unituse[16];
int ttmuse;
if (n_ev > 6)
return -1;
/* First pass to count resource use */
memset(busbyte, 0, sizeof(busbyte));
memset(unituse, 0, sizeof(unituse));
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
if (pmc > 6)
return -1;
if (pmc_inuse & (1 << (pmc - 1)))
return -1;
pmc_inuse |= 1 << (pmc - 1);
}
if (event[i] & PM_BUSEVENT_MSK) {
unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
if (unit > PM_LASTUNIT)
return -1;
if (unit == PM_ISU0_ALT)
unit = PM_ISU0;
if (byte >= 4) {
if (unit != PM_LSU1)
return -1;
++unit;
byte &= 3;
}
if (busbyte[byte] && busbyte[byte] != unit)
return -1;
busbyte[byte] = unit;
unituse[unit] = 1;
}
}
/*
* Assign resources and set multiplexer selects.
*
* PM_ISU0 can go either on TTM0 or TTM1, but that's the only
* choice we have to deal with.
*/
if (unituse[PM_ISU0] &
(unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_ISU1])) {
unituse[PM_ISU0_ALT] = 1; /* move ISU to TTM1 */
unituse[PM_ISU0] = 0;
}
/* Set TTM[01]SEL fields. */
ttmuse = 0;
for (i = PM_FPU; i <= PM_ISU1; ++i) {
if (!unituse[i])
continue;
if (ttmuse++)
return -1;
mmcr1 |= (unsigned long)i << MMCR1_TTM0SEL_SH;
}
ttmuse = 0;
for (; i <= PM_GRS; ++i) {
if (!unituse[i])
continue;
if (ttmuse++)
return -1;
mmcr1 |= (unsigned long)(i & 3) << MMCR1_TTM1SEL_SH;
}
if (ttmuse > 1)
return -1;
/* Set byte lane select fields, TTM[23]SEL and GRS_*SEL. */
for (byte = 0; byte < 4; ++byte) {
unit = busbyte[byte];
if (!unit)
continue;
if (unit == PM_ISU0 && unituse[PM_ISU0_ALT]) {
/* get ISU0 through TTM1 rather than TTM0 */
unit = PM_ISU0_ALT;
} else if (unit == PM_LSU1 + 1) {
/* select lower word of LSU1 for this byte */
mmcr1 |= 1ul << (MMCR1_TTM3SEL_SH + 3 - byte);
}
ttm = unit >> 2;
mmcr1 |= (unsigned long)ttm
<< (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
}
/* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
psel = event[i] & PM_PMCSEL_MSK;
isbus = event[i] & PM_BUSEVENT_MSK;
if (!pmc) {
/* Bus event or any-PMC direct event */
for (pmc = 0; pmc < 4; ++pmc) {
if (!(pmc_inuse & (1 << pmc)))
break;
}
if (pmc >= 4)
return -1;
pmc_inuse |= 1 << pmc;
} else if (pmc <= 4) {
/* Direct event */
--pmc;
if (isbus && (byte & 2) &&
(psel == 8 || psel == 0x10 || psel == 0x28))
/* add events on higher-numbered bus */
mmcr1 |= 1ul << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
} else {
/* Instructions or run cycles on PMC5/6 */
--pmc;
}
if (isbus && unit == PM_GRS) {
bit = psel & 7;
grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK;
mmcr1 |= (unsigned long)grsel << grsel_shift[bit];
}
if (power5p_marked_instr_event(event[i]))
mmcra |= MMCRA_SAMPLE_ENABLE;
if ((psel & 0x58) == 0x40 && (byte & 1) != ((pmc >> 1) & 1))
/* select alternate byte lane */
psel |= 0x10;
if (pmc <= 3)
mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc);
hwc[i] = pmc;
}
/* Return MMCRx values */
mmcr[0] = 0;
if (pmc_inuse & 1)
mmcr[0] = MMCR0_PMC1CE;
if (pmc_inuse & 0x3e)
mmcr[0] |= MMCR0_PMCjCE;
mmcr[1] = mmcr1;
mmcr[2] = mmcra;
return 0;
}
static void power5p_disable_pmc(unsigned int pmc, unsigned long mmcr[])
{
if (pmc <= 3)
mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
}
static int power5p_generic_events[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 0xf,
[PERF_COUNT_HW_INSTRUCTIONS] = 0x100009,
[PERF_COUNT_HW_CACHE_REFERENCES] = 0x1c10a8, /* LD_REF_L1 */
[PERF_COUNT_HW_CACHE_MISSES] = 0x3c1088, /* LD_MISS_L1 */
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x230e4, /* BR_ISSUED */
[PERF_COUNT_HW_BRANCH_MISSES] = 0x230e5, /* BR_MPRED_CR */
};
#define C(x) PERF_COUNT_HW_CACHE_##x
/*
* Table of generalized cache-related events.
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x1c10a8, 0x3c1088 },
[C(OP_WRITE)] = { 0x2c10a8, 0xc10c3 },
[C(OP_PREFETCH)] = { 0xc70e7, -1 },
},
[C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { 0, 0 },
},
[C(LL)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0 },
[C(OP_WRITE)] = { 0, 0 },
[C(OP_PREFETCH)] = { 0xc50c3, 0 },
},
[C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0xc20e4, 0x800c4 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0x800c0 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x230e4, 0x230e5 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(NODE)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { -1, -1 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
};
static struct power_pmu power5p_pmu = {
.name = "POWER5+/++",
.n_counter = 6,
.max_alternatives = MAX_ALT,
.add_fields = 0x7000000000055ul,
.test_adder = 0x3000040000000ul,
.compute_mmcr = power5p_compute_mmcr,
.get_constraint = power5p_get_constraint,
.get_alternatives = power5p_get_alternatives,
.disable_pmc = power5p_disable_pmc,
.limited_pmc_event = power5p_limited_pmc_event,
.flags = PPMU_LIMITED_PMC5_6,
.n_generic = ARRAY_SIZE(power5p_generic_events),
.generic_events = power5p_generic_events,
.cache_events = &power5p_cache_events,
};
static int __init init_power5p_pmu(void)
{
if (!cur_cpu_spec->oprofile_cpu_type ||
(strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
&& strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++")))
return -ENODEV;
return register_power_pmu(&power5p_pmu);
}
early_initcall(init_power5p_pmu);
Reference in New Issue View Git Blame Copy Permalink