mirror of
https://github.com/torvalds/linux.git
synced 2024-12-28 22:02:28 +00:00
fe06912333
Do not set num_tx_queues or real_num_tx_queues, since alloc_etherdev_mq() does that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
3283 lines
86 KiB
C
3283 lines
86 KiB
C
/*
|
|
* drivers/net/gianfar.c
|
|
*
|
|
* Gianfar Ethernet Driver
|
|
* This driver is designed for the non-CPM ethernet controllers
|
|
* on the 85xx and 83xx family of integrated processors
|
|
* Based on 8260_io/fcc_enet.c
|
|
*
|
|
* Author: Andy Fleming
|
|
* Maintainer: Kumar Gala
|
|
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
|
|
*
|
|
* Copyright 2002-2009 Freescale Semiconductor, Inc.
|
|
* Copyright 2007 MontaVista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Gianfar: AKA Lambda Draconis, "Dragon"
|
|
* RA 11 31 24.2
|
|
* Dec +69 19 52
|
|
* V 3.84
|
|
* B-V +1.62
|
|
*
|
|
* Theory of operation
|
|
*
|
|
* The driver is initialized through of_device. Configuration information
|
|
* is therefore conveyed through an OF-style device tree.
|
|
*
|
|
* The Gianfar Ethernet Controller uses a ring of buffer
|
|
* descriptors. The beginning is indicated by a register
|
|
* pointing to the physical address of the start of the ring.
|
|
* The end is determined by a "wrap" bit being set in the
|
|
* last descriptor of the ring.
|
|
*
|
|
* When a packet is received, the RXF bit in the
|
|
* IEVENT register is set, triggering an interrupt when the
|
|
* corresponding bit in the IMASK register is also set (if
|
|
* interrupt coalescing is active, then the interrupt may not
|
|
* happen immediately, but will wait until either a set number
|
|
* of frames or amount of time have passed). In NAPI, the
|
|
* interrupt handler will signal there is work to be done, and
|
|
* exit. This method will start at the last known empty
|
|
* descriptor, and process every subsequent descriptor until there
|
|
* are none left with data (NAPI will stop after a set number of
|
|
* packets to give time to other tasks, but will eventually
|
|
* process all the packets). The data arrives inside a
|
|
* pre-allocated skb, and so after the skb is passed up to the
|
|
* stack, a new skb must be allocated, and the address field in
|
|
* the buffer descriptor must be updated to indicate this new
|
|
* skb.
|
|
*
|
|
* When the kernel requests that a packet be transmitted, the
|
|
* driver starts where it left off last time, and points the
|
|
* descriptor at the buffer which was passed in. The driver
|
|
* then informs the DMA engine that there are packets ready to
|
|
* be transmitted. Once the controller is finished transmitting
|
|
* the packet, an interrupt may be triggered (under the same
|
|
* conditions as for reception, but depending on the TXF bit).
|
|
* The driver then cleans up the buffer.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/in.h>
|
|
#include <linux/net_tstamp.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/module.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/phy_fixed.h>
|
|
#include <linux/of.h>
|
|
|
|
#include "gianfar.h"
|
|
#include "fsl_pq_mdio.h"
|
|
|
|
#define TX_TIMEOUT (1*HZ)
|
|
#undef BRIEF_GFAR_ERRORS
|
|
#undef VERBOSE_GFAR_ERRORS
|
|
|
|
const char gfar_driver_name[] = "Gianfar Ethernet";
|
|
const char gfar_driver_version[] = "1.3";
|
|
|
|
static int gfar_enet_open(struct net_device *dev);
|
|
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static void gfar_reset_task(struct work_struct *work);
|
|
static void gfar_timeout(struct net_device *dev);
|
|
static int gfar_close(struct net_device *dev);
|
|
struct sk_buff *gfar_new_skb(struct net_device *dev);
|
|
static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
|
|
struct sk_buff *skb);
|
|
static int gfar_set_mac_address(struct net_device *dev);
|
|
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
|
|
static irqreturn_t gfar_error(int irq, void *dev_id);
|
|
static irqreturn_t gfar_transmit(int irq, void *dev_id);
|
|
static irqreturn_t gfar_interrupt(int irq, void *dev_id);
|
|
static void adjust_link(struct net_device *dev);
|
|
static void init_registers(struct net_device *dev);
|
|
static int init_phy(struct net_device *dev);
|
|
static int gfar_probe(struct platform_device *ofdev,
|
|
const struct of_device_id *match);
|
|
static int gfar_remove(struct platform_device *ofdev);
|
|
static void free_skb_resources(struct gfar_private *priv);
|
|
static void gfar_set_multi(struct net_device *dev);
|
|
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
|
|
static void gfar_configure_serdes(struct net_device *dev);
|
|
static int gfar_poll(struct napi_struct *napi, int budget);
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void gfar_netpoll(struct net_device *dev);
|
|
#endif
|
|
int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit);
|
|
static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue);
|
|
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
|
|
int amount_pull);
|
|
static void gfar_vlan_rx_register(struct net_device *netdev,
|
|
struct vlan_group *grp);
|
|
void gfar_halt(struct net_device *dev);
|
|
static void gfar_halt_nodisable(struct net_device *dev);
|
|
void gfar_start(struct net_device *dev);
|
|
static void gfar_clear_exact_match(struct net_device *dev);
|
|
static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
|
|
static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
|
|
MODULE_AUTHOR("Freescale Semiconductor, Inc");
|
|
MODULE_DESCRIPTION("Gianfar Ethernet Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static void gfar_init_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
|
|
dma_addr_t buf)
|
|
{
|
|
u32 lstatus;
|
|
|
|
bdp->bufPtr = buf;
|
|
|
|
lstatus = BD_LFLAG(RXBD_EMPTY | RXBD_INTERRUPT);
|
|
if (bdp == rx_queue->rx_bd_base + rx_queue->rx_ring_size - 1)
|
|
lstatus |= BD_LFLAG(RXBD_WRAP);
|
|
|
|
eieio();
|
|
|
|
bdp->lstatus = lstatus;
|
|
}
|
|
|
|
static int gfar_init_bds(struct net_device *ndev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(ndev);
|
|
struct gfar_priv_tx_q *tx_queue = NULL;
|
|
struct gfar_priv_rx_q *rx_queue = NULL;
|
|
struct txbd8 *txbdp;
|
|
struct rxbd8 *rxbdp;
|
|
int i, j;
|
|
|
|
for (i = 0; i < priv->num_tx_queues; i++) {
|
|
tx_queue = priv->tx_queue[i];
|
|
/* Initialize some variables in our dev structure */
|
|
tx_queue->num_txbdfree = tx_queue->tx_ring_size;
|
|
tx_queue->dirty_tx = tx_queue->tx_bd_base;
|
|
tx_queue->cur_tx = tx_queue->tx_bd_base;
|
|
tx_queue->skb_curtx = 0;
|
|
tx_queue->skb_dirtytx = 0;
|
|
|
|
/* Initialize Transmit Descriptor Ring */
|
|
txbdp = tx_queue->tx_bd_base;
|
|
for (j = 0; j < tx_queue->tx_ring_size; j++) {
|
|
txbdp->lstatus = 0;
|
|
txbdp->bufPtr = 0;
|
|
txbdp++;
|
|
}
|
|
|
|
/* Set the last descriptor in the ring to indicate wrap */
|
|
txbdp--;
|
|
txbdp->status |= TXBD_WRAP;
|
|
}
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++) {
|
|
rx_queue = priv->rx_queue[i];
|
|
rx_queue->cur_rx = rx_queue->rx_bd_base;
|
|
rx_queue->skb_currx = 0;
|
|
rxbdp = rx_queue->rx_bd_base;
|
|
|
|
for (j = 0; j < rx_queue->rx_ring_size; j++) {
|
|
struct sk_buff *skb = rx_queue->rx_skbuff[j];
|
|
|
|
if (skb) {
|
|
gfar_init_rxbdp(rx_queue, rxbdp,
|
|
rxbdp->bufPtr);
|
|
} else {
|
|
skb = gfar_new_skb(ndev);
|
|
if (!skb) {
|
|
pr_err("%s: Can't allocate RX buffers\n",
|
|
ndev->name);
|
|
goto err_rxalloc_fail;
|
|
}
|
|
rx_queue->rx_skbuff[j] = skb;
|
|
|
|
gfar_new_rxbdp(rx_queue, rxbdp, skb);
|
|
}
|
|
|
|
rxbdp++;
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_rxalloc_fail:
|
|
free_skb_resources(priv);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int gfar_alloc_skb_resources(struct net_device *ndev)
|
|
{
|
|
void *vaddr;
|
|
dma_addr_t addr;
|
|
int i, j, k;
|
|
struct gfar_private *priv = netdev_priv(ndev);
|
|
struct device *dev = &priv->ofdev->dev;
|
|
struct gfar_priv_tx_q *tx_queue = NULL;
|
|
struct gfar_priv_rx_q *rx_queue = NULL;
|
|
|
|
priv->total_tx_ring_size = 0;
|
|
for (i = 0; i < priv->num_tx_queues; i++)
|
|
priv->total_tx_ring_size += priv->tx_queue[i]->tx_ring_size;
|
|
|
|
priv->total_rx_ring_size = 0;
|
|
for (i = 0; i < priv->num_rx_queues; i++)
|
|
priv->total_rx_ring_size += priv->rx_queue[i]->rx_ring_size;
|
|
|
|
/* Allocate memory for the buffer descriptors */
|
|
vaddr = dma_alloc_coherent(dev,
|
|
sizeof(struct txbd8) * priv->total_tx_ring_size +
|
|
sizeof(struct rxbd8) * priv->total_rx_ring_size,
|
|
&addr, GFP_KERNEL);
|
|
if (!vaddr) {
|
|
if (netif_msg_ifup(priv))
|
|
pr_err("%s: Could not allocate buffer descriptors!\n",
|
|
ndev->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < priv->num_tx_queues; i++) {
|
|
tx_queue = priv->tx_queue[i];
|
|
tx_queue->tx_bd_base = (struct txbd8 *) vaddr;
|
|
tx_queue->tx_bd_dma_base = addr;
|
|
tx_queue->dev = ndev;
|
|
/* enet DMA only understands physical addresses */
|
|
addr += sizeof(struct txbd8) *tx_queue->tx_ring_size;
|
|
vaddr += sizeof(struct txbd8) *tx_queue->tx_ring_size;
|
|
}
|
|
|
|
/* Start the rx descriptor ring where the tx ring leaves off */
|
|
for (i = 0; i < priv->num_rx_queues; i++) {
|
|
rx_queue = priv->rx_queue[i];
|
|
rx_queue->rx_bd_base = (struct rxbd8 *) vaddr;
|
|
rx_queue->rx_bd_dma_base = addr;
|
|
rx_queue->dev = ndev;
|
|
addr += sizeof (struct rxbd8) * rx_queue->rx_ring_size;
|
|
vaddr += sizeof (struct rxbd8) * rx_queue->rx_ring_size;
|
|
}
|
|
|
|
/* Setup the skbuff rings */
|
|
for (i = 0; i < priv->num_tx_queues; i++) {
|
|
tx_queue = priv->tx_queue[i];
|
|
tx_queue->tx_skbuff = kmalloc(sizeof(*tx_queue->tx_skbuff) *
|
|
tx_queue->tx_ring_size, GFP_KERNEL);
|
|
if (!tx_queue->tx_skbuff) {
|
|
if (netif_msg_ifup(priv))
|
|
pr_err("%s: Could not allocate tx_skbuff\n",
|
|
ndev->name);
|
|
goto cleanup;
|
|
}
|
|
|
|
for (k = 0; k < tx_queue->tx_ring_size; k++)
|
|
tx_queue->tx_skbuff[k] = NULL;
|
|
}
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++) {
|
|
rx_queue = priv->rx_queue[i];
|
|
rx_queue->rx_skbuff = kmalloc(sizeof(*rx_queue->rx_skbuff) *
|
|
rx_queue->rx_ring_size, GFP_KERNEL);
|
|
|
|
if (!rx_queue->rx_skbuff) {
|
|
if (netif_msg_ifup(priv))
|
|
pr_err("%s: Could not allocate rx_skbuff\n",
|
|
ndev->name);
|
|
goto cleanup;
|
|
}
|
|
|
|
for (j = 0; j < rx_queue->rx_ring_size; j++)
|
|
rx_queue->rx_skbuff[j] = NULL;
|
|
}
|
|
|
|
if (gfar_init_bds(ndev))
|
|
goto cleanup;
|
|
|
|
return 0;
|
|
|
|
cleanup:
|
|
free_skb_resources(priv);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void gfar_init_tx_rx_base(struct gfar_private *priv)
|
|
{
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
u32 __iomem *baddr;
|
|
int i;
|
|
|
|
baddr = ®s->tbase0;
|
|
for(i = 0; i < priv->num_tx_queues; i++) {
|
|
gfar_write(baddr, priv->tx_queue[i]->tx_bd_dma_base);
|
|
baddr += 2;
|
|
}
|
|
|
|
baddr = ®s->rbase0;
|
|
for(i = 0; i < priv->num_rx_queues; i++) {
|
|
gfar_write(baddr, priv->rx_queue[i]->rx_bd_dma_base);
|
|
baddr += 2;
|
|
}
|
|
}
|
|
|
|
static void gfar_init_mac(struct net_device *ndev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(ndev);
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
u32 rctrl = 0;
|
|
u32 tctrl = 0;
|
|
u32 attrs = 0;
|
|
|
|
/* write the tx/rx base registers */
|
|
gfar_init_tx_rx_base(priv);
|
|
|
|
/* Configure the coalescing support */
|
|
gfar_configure_coalescing(priv, 0xFF, 0xFF);
|
|
|
|
if (priv->rx_filer_enable) {
|
|
rctrl |= RCTRL_FILREN;
|
|
/* Program the RIR0 reg with the required distribution */
|
|
gfar_write(®s->rir0, DEFAULT_RIR0);
|
|
}
|
|
|
|
if (priv->rx_csum_enable)
|
|
rctrl |= RCTRL_CHECKSUMMING;
|
|
|
|
if (priv->extended_hash) {
|
|
rctrl |= RCTRL_EXTHASH;
|
|
|
|
gfar_clear_exact_match(ndev);
|
|
rctrl |= RCTRL_EMEN;
|
|
}
|
|
|
|
if (priv->padding) {
|
|
rctrl &= ~RCTRL_PAL_MASK;
|
|
rctrl |= RCTRL_PADDING(priv->padding);
|
|
}
|
|
|
|
/* Insert receive time stamps into padding alignment bytes */
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER) {
|
|
rctrl &= ~RCTRL_PAL_MASK;
|
|
rctrl |= RCTRL_PADDING(8);
|
|
priv->padding = 8;
|
|
}
|
|
|
|
/* Enable HW time stamping if requested from user space */
|
|
if (priv->hwts_rx_en)
|
|
rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE;
|
|
|
|
/* keep vlan related bits if it's enabled */
|
|
if (priv->vlgrp) {
|
|
rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
|
|
tctrl |= TCTRL_VLINS;
|
|
}
|
|
|
|
/* Init rctrl based on our settings */
|
|
gfar_write(®s->rctrl, rctrl);
|
|
|
|
if (ndev->features & NETIF_F_IP_CSUM)
|
|
tctrl |= TCTRL_INIT_CSUM;
|
|
|
|
tctrl |= TCTRL_TXSCHED_PRIO;
|
|
|
|
gfar_write(®s->tctrl, tctrl);
|
|
|
|
/* Set the extraction length and index */
|
|
attrs = ATTRELI_EL(priv->rx_stash_size) |
|
|
ATTRELI_EI(priv->rx_stash_index);
|
|
|
|
gfar_write(®s->attreli, attrs);
|
|
|
|
/* Start with defaults, and add stashing or locking
|
|
* depending on the approprate variables */
|
|
attrs = ATTR_INIT_SETTINGS;
|
|
|
|
if (priv->bd_stash_en)
|
|
attrs |= ATTR_BDSTASH;
|
|
|
|
if (priv->rx_stash_size != 0)
|
|
attrs |= ATTR_BUFSTASH;
|
|
|
|
gfar_write(®s->attr, attrs);
|
|
|
|
gfar_write(®s->fifo_tx_thr, priv->fifo_threshold);
|
|
gfar_write(®s->fifo_tx_starve, priv->fifo_starve);
|
|
gfar_write(®s->fifo_tx_starve_shutoff, priv->fifo_starve_off);
|
|
}
|
|
|
|
static struct net_device_stats *gfar_get_stats(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct netdev_queue *txq;
|
|
unsigned long rx_packets = 0, rx_bytes = 0, rx_dropped = 0;
|
|
unsigned long tx_packets = 0, tx_bytes = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++) {
|
|
rx_packets += priv->rx_queue[i]->stats.rx_packets;
|
|
rx_bytes += priv->rx_queue[i]->stats.rx_bytes;
|
|
rx_dropped += priv->rx_queue[i]->stats.rx_dropped;
|
|
}
|
|
|
|
dev->stats.rx_packets = rx_packets;
|
|
dev->stats.rx_bytes = rx_bytes;
|
|
dev->stats.rx_dropped = rx_dropped;
|
|
|
|
for (i = 0; i < priv->num_tx_queues; i++) {
|
|
txq = netdev_get_tx_queue(dev, i);
|
|
tx_bytes += txq->tx_bytes;
|
|
tx_packets += txq->tx_packets;
|
|
}
|
|
|
|
dev->stats.tx_bytes = tx_bytes;
|
|
dev->stats.tx_packets = tx_packets;
|
|
|
|
return &dev->stats;
|
|
}
|
|
|
|
static const struct net_device_ops gfar_netdev_ops = {
|
|
.ndo_open = gfar_enet_open,
|
|
.ndo_start_xmit = gfar_start_xmit,
|
|
.ndo_stop = gfar_close,
|
|
.ndo_change_mtu = gfar_change_mtu,
|
|
.ndo_set_multicast_list = gfar_set_multi,
|
|
.ndo_tx_timeout = gfar_timeout,
|
|
.ndo_do_ioctl = gfar_ioctl,
|
|
.ndo_get_stats = gfar_get_stats,
|
|
.ndo_vlan_rx_register = gfar_vlan_rx_register,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = gfar_netpoll,
|
|
#endif
|
|
};
|
|
|
|
unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
|
|
unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
|
|
|
|
void lock_rx_qs(struct gfar_private *priv)
|
|
{
|
|
int i = 0x0;
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++)
|
|
spin_lock(&priv->rx_queue[i]->rxlock);
|
|
}
|
|
|
|
void lock_tx_qs(struct gfar_private *priv)
|
|
{
|
|
int i = 0x0;
|
|
|
|
for (i = 0; i < priv->num_tx_queues; i++)
|
|
spin_lock(&priv->tx_queue[i]->txlock);
|
|
}
|
|
|
|
void unlock_rx_qs(struct gfar_private *priv)
|
|
{
|
|
int i = 0x0;
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++)
|
|
spin_unlock(&priv->rx_queue[i]->rxlock);
|
|
}
|
|
|
|
void unlock_tx_qs(struct gfar_private *priv)
|
|
{
|
|
int i = 0x0;
|
|
|
|
for (i = 0; i < priv->num_tx_queues; i++)
|
|
spin_unlock(&priv->tx_queue[i]->txlock);
|
|
}
|
|
|
|
/* Returns 1 if incoming frames use an FCB */
|
|
static inline int gfar_uses_fcb(struct gfar_private *priv)
|
|
{
|
|
return priv->vlgrp || priv->rx_csum_enable ||
|
|
(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER);
|
|
}
|
|
|
|
static void free_tx_pointers(struct gfar_private *priv)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < priv->num_tx_queues; i++)
|
|
kfree(priv->tx_queue[i]);
|
|
}
|
|
|
|
static void free_rx_pointers(struct gfar_private *priv)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++)
|
|
kfree(priv->rx_queue[i]);
|
|
}
|
|
|
|
static void unmap_group_regs(struct gfar_private *priv)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < MAXGROUPS; i++)
|
|
if (priv->gfargrp[i].regs)
|
|
iounmap(priv->gfargrp[i].regs);
|
|
}
|
|
|
|
static void disable_napi(struct gfar_private *priv)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < priv->num_grps; i++)
|
|
napi_disable(&priv->gfargrp[i].napi);
|
|
}
|
|
|
|
static void enable_napi(struct gfar_private *priv)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < priv->num_grps; i++)
|
|
napi_enable(&priv->gfargrp[i].napi);
|
|
}
|
|
|
|
static int gfar_parse_group(struct device_node *np,
|
|
struct gfar_private *priv, const char *model)
|
|
{
|
|
u32 *queue_mask;
|
|
|
|
priv->gfargrp[priv->num_grps].regs = of_iomap(np, 0);
|
|
if (!priv->gfargrp[priv->num_grps].regs)
|
|
return -ENOMEM;
|
|
|
|
priv->gfargrp[priv->num_grps].interruptTransmit =
|
|
irq_of_parse_and_map(np, 0);
|
|
|
|
/* If we aren't the FEC we have multiple interrupts */
|
|
if (model && strcasecmp(model, "FEC")) {
|
|
priv->gfargrp[priv->num_grps].interruptReceive =
|
|
irq_of_parse_and_map(np, 1);
|
|
priv->gfargrp[priv->num_grps].interruptError =
|
|
irq_of_parse_and_map(np,2);
|
|
if (priv->gfargrp[priv->num_grps].interruptTransmit < 0 ||
|
|
priv->gfargrp[priv->num_grps].interruptReceive < 0 ||
|
|
priv->gfargrp[priv->num_grps].interruptError < 0) {
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
priv->gfargrp[priv->num_grps].grp_id = priv->num_grps;
|
|
priv->gfargrp[priv->num_grps].priv = priv;
|
|
spin_lock_init(&priv->gfargrp[priv->num_grps].grplock);
|
|
if(priv->mode == MQ_MG_MODE) {
|
|
queue_mask = (u32 *)of_get_property(np,
|
|
"fsl,rx-bit-map", NULL);
|
|
priv->gfargrp[priv->num_grps].rx_bit_map =
|
|
queue_mask ? *queue_mask :(DEFAULT_MAPPING >> priv->num_grps);
|
|
queue_mask = (u32 *)of_get_property(np,
|
|
"fsl,tx-bit-map", NULL);
|
|
priv->gfargrp[priv->num_grps].tx_bit_map =
|
|
queue_mask ? *queue_mask : (DEFAULT_MAPPING >> priv->num_grps);
|
|
} else {
|
|
priv->gfargrp[priv->num_grps].rx_bit_map = 0xFF;
|
|
priv->gfargrp[priv->num_grps].tx_bit_map = 0xFF;
|
|
}
|
|
priv->num_grps++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
|
|
{
|
|
const char *model;
|
|
const char *ctype;
|
|
const void *mac_addr;
|
|
int err = 0, i;
|
|
struct net_device *dev = NULL;
|
|
struct gfar_private *priv = NULL;
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
struct device_node *child = NULL;
|
|
const u32 *stash;
|
|
const u32 *stash_len;
|
|
const u32 *stash_idx;
|
|
unsigned int num_tx_qs, num_rx_qs;
|
|
u32 *tx_queues, *rx_queues;
|
|
|
|
if (!np || !of_device_is_available(np))
|
|
return -ENODEV;
|
|
|
|
/* parse the num of tx and rx queues */
|
|
tx_queues = (u32 *)of_get_property(np, "fsl,num_tx_queues", NULL);
|
|
num_tx_qs = tx_queues ? *tx_queues : 1;
|
|
|
|
if (num_tx_qs > MAX_TX_QS) {
|
|
printk(KERN_ERR "num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n",
|
|
num_tx_qs, MAX_TX_QS);
|
|
printk(KERN_ERR "Cannot do alloc_etherdev, aborting\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
rx_queues = (u32 *)of_get_property(np, "fsl,num_rx_queues", NULL);
|
|
num_rx_qs = rx_queues ? *rx_queues : 1;
|
|
|
|
if (num_rx_qs > MAX_RX_QS) {
|
|
printk(KERN_ERR "num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
|
|
num_tx_qs, MAX_TX_QS);
|
|
printk(KERN_ERR "Cannot do alloc_etherdev, aborting\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
*pdev = alloc_etherdev_mq(sizeof(*priv), num_tx_qs);
|
|
dev = *pdev;
|
|
if (NULL == dev)
|
|
return -ENOMEM;
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->node = ofdev->dev.of_node;
|
|
priv->ndev = dev;
|
|
|
|
priv->num_tx_queues = num_tx_qs;
|
|
netif_set_real_num_rx_queues(dev, num_rx_qs);
|
|
priv->num_rx_queues = num_rx_qs;
|
|
priv->num_grps = 0x0;
|
|
|
|
model = of_get_property(np, "model", NULL);
|
|
|
|
for (i = 0; i < MAXGROUPS; i++)
|
|
priv->gfargrp[i].regs = NULL;
|
|
|
|
/* Parse and initialize group specific information */
|
|
if (of_device_is_compatible(np, "fsl,etsec2")) {
|
|
priv->mode = MQ_MG_MODE;
|
|
for_each_child_of_node(np, child) {
|
|
err = gfar_parse_group(child, priv, model);
|
|
if (err)
|
|
goto err_grp_init;
|
|
}
|
|
} else {
|
|
priv->mode = SQ_SG_MODE;
|
|
err = gfar_parse_group(np, priv, model);
|
|
if(err)
|
|
goto err_grp_init;
|
|
}
|
|
|
|
for (i = 0; i < priv->num_tx_queues; i++)
|
|
priv->tx_queue[i] = NULL;
|
|
for (i = 0; i < priv->num_rx_queues; i++)
|
|
priv->rx_queue[i] = NULL;
|
|
|
|
for (i = 0; i < priv->num_tx_queues; i++) {
|
|
priv->tx_queue[i] = kzalloc(sizeof(struct gfar_priv_tx_q),
|
|
GFP_KERNEL);
|
|
if (!priv->tx_queue[i]) {
|
|
err = -ENOMEM;
|
|
goto tx_alloc_failed;
|
|
}
|
|
priv->tx_queue[i]->tx_skbuff = NULL;
|
|
priv->tx_queue[i]->qindex = i;
|
|
priv->tx_queue[i]->dev = dev;
|
|
spin_lock_init(&(priv->tx_queue[i]->txlock));
|
|
}
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++) {
|
|
priv->rx_queue[i] = kzalloc(sizeof(struct gfar_priv_rx_q),
|
|
GFP_KERNEL);
|
|
if (!priv->rx_queue[i]) {
|
|
err = -ENOMEM;
|
|
goto rx_alloc_failed;
|
|
}
|
|
priv->rx_queue[i]->rx_skbuff = NULL;
|
|
priv->rx_queue[i]->qindex = i;
|
|
priv->rx_queue[i]->dev = dev;
|
|
spin_lock_init(&(priv->rx_queue[i]->rxlock));
|
|
}
|
|
|
|
|
|
stash = of_get_property(np, "bd-stash", NULL);
|
|
|
|
if (stash) {
|
|
priv->device_flags |= FSL_GIANFAR_DEV_HAS_BD_STASHING;
|
|
priv->bd_stash_en = 1;
|
|
}
|
|
|
|
stash_len = of_get_property(np, "rx-stash-len", NULL);
|
|
|
|
if (stash_len)
|
|
priv->rx_stash_size = *stash_len;
|
|
|
|
stash_idx = of_get_property(np, "rx-stash-idx", NULL);
|
|
|
|
if (stash_idx)
|
|
priv->rx_stash_index = *stash_idx;
|
|
|
|
if (stash_len || stash_idx)
|
|
priv->device_flags |= FSL_GIANFAR_DEV_HAS_BUF_STASHING;
|
|
|
|
mac_addr = of_get_mac_address(np);
|
|
if (mac_addr)
|
|
memcpy(dev->dev_addr, mac_addr, MAC_ADDR_LEN);
|
|
|
|
if (model && !strcasecmp(model, "TSEC"))
|
|
priv->device_flags =
|
|
FSL_GIANFAR_DEV_HAS_GIGABIT |
|
|
FSL_GIANFAR_DEV_HAS_COALESCE |
|
|
FSL_GIANFAR_DEV_HAS_RMON |
|
|
FSL_GIANFAR_DEV_HAS_MULTI_INTR;
|
|
if (model && !strcasecmp(model, "eTSEC"))
|
|
priv->device_flags =
|
|
FSL_GIANFAR_DEV_HAS_GIGABIT |
|
|
FSL_GIANFAR_DEV_HAS_COALESCE |
|
|
FSL_GIANFAR_DEV_HAS_RMON |
|
|
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
|
|
FSL_GIANFAR_DEV_HAS_PADDING |
|
|
FSL_GIANFAR_DEV_HAS_CSUM |
|
|
FSL_GIANFAR_DEV_HAS_VLAN |
|
|
FSL_GIANFAR_DEV_HAS_MAGIC_PACKET |
|
|
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH |
|
|
FSL_GIANFAR_DEV_HAS_TIMER;
|
|
|
|
ctype = of_get_property(np, "phy-connection-type", NULL);
|
|
|
|
/* We only care about rgmii-id. The rest are autodetected */
|
|
if (ctype && !strcmp(ctype, "rgmii-id"))
|
|
priv->interface = PHY_INTERFACE_MODE_RGMII_ID;
|
|
else
|
|
priv->interface = PHY_INTERFACE_MODE_MII;
|
|
|
|
if (of_get_property(np, "fsl,magic-packet", NULL))
|
|
priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
|
|
|
|
priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
|
|
|
|
/* Find the TBI PHY. If it's not there, we don't support SGMII */
|
|
priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
|
|
|
|
return 0;
|
|
|
|
rx_alloc_failed:
|
|
free_rx_pointers(priv);
|
|
tx_alloc_failed:
|
|
free_tx_pointers(priv);
|
|
err_grp_init:
|
|
unmap_group_regs(priv);
|
|
free_netdev(dev);
|
|
return err;
|
|
}
|
|
|
|
static int gfar_hwtstamp_ioctl(struct net_device *netdev,
|
|
struct ifreq *ifr, int cmd)
|
|
{
|
|
struct hwtstamp_config config;
|
|
struct gfar_private *priv = netdev_priv(netdev);
|
|
|
|
if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
|
|
return -EFAULT;
|
|
|
|
/* reserved for future extensions */
|
|
if (config.flags)
|
|
return -EINVAL;
|
|
|
|
switch (config.tx_type) {
|
|
case HWTSTAMP_TX_OFF:
|
|
priv->hwts_tx_en = 0;
|
|
break;
|
|
case HWTSTAMP_TX_ON:
|
|
if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER))
|
|
return -ERANGE;
|
|
priv->hwts_tx_en = 1;
|
|
break;
|
|
default:
|
|
return -ERANGE;
|
|
}
|
|
|
|
switch (config.rx_filter) {
|
|
case HWTSTAMP_FILTER_NONE:
|
|
if (priv->hwts_rx_en) {
|
|
stop_gfar(netdev);
|
|
priv->hwts_rx_en = 0;
|
|
startup_gfar(netdev);
|
|
}
|
|
break;
|
|
default:
|
|
if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER))
|
|
return -ERANGE;
|
|
if (!priv->hwts_rx_en) {
|
|
stop_gfar(netdev);
|
|
priv->hwts_rx_en = 1;
|
|
startup_gfar(netdev);
|
|
}
|
|
config.rx_filter = HWTSTAMP_FILTER_ALL;
|
|
break;
|
|
}
|
|
|
|
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
|
|
-EFAULT : 0;
|
|
}
|
|
|
|
/* Ioctl MII Interface */
|
|
static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return -EINVAL;
|
|
|
|
if (cmd == SIOCSHWTSTAMP)
|
|
return gfar_hwtstamp_ioctl(dev, rq, cmd);
|
|
|
|
if (!priv->phydev)
|
|
return -ENODEV;
|
|
|
|
return phy_mii_ioctl(priv->phydev, rq, cmd);
|
|
}
|
|
|
|
static unsigned int reverse_bitmap(unsigned int bit_map, unsigned int max_qs)
|
|
{
|
|
unsigned int new_bit_map = 0x0;
|
|
int mask = 0x1 << (max_qs - 1), i;
|
|
for (i = 0; i < max_qs; i++) {
|
|
if (bit_map & mask)
|
|
new_bit_map = new_bit_map + (1 << i);
|
|
mask = mask >> 0x1;
|
|
}
|
|
return new_bit_map;
|
|
}
|
|
|
|
static u32 cluster_entry_per_class(struct gfar_private *priv, u32 rqfar,
|
|
u32 class)
|
|
{
|
|
u32 rqfpr = FPR_FILER_MASK;
|
|
u32 rqfcr = 0x0;
|
|
|
|
rqfar--;
|
|
rqfcr = RQFCR_CLE | RQFCR_PID_MASK | RQFCR_CMP_EXACT;
|
|
ftp_rqfpr[rqfar] = rqfpr;
|
|
ftp_rqfcr[rqfar] = rqfcr;
|
|
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
|
|
|
|
rqfar--;
|
|
rqfcr = RQFCR_CMP_NOMATCH;
|
|
ftp_rqfpr[rqfar] = rqfpr;
|
|
ftp_rqfcr[rqfar] = rqfcr;
|
|
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
|
|
|
|
rqfar--;
|
|
rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_PARSE | RQFCR_CLE | RQFCR_AND;
|
|
rqfpr = class;
|
|
ftp_rqfcr[rqfar] = rqfcr;
|
|
ftp_rqfpr[rqfar] = rqfpr;
|
|
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
|
|
|
|
rqfar--;
|
|
rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_MASK | RQFCR_AND;
|
|
rqfpr = class;
|
|
ftp_rqfcr[rqfar] = rqfcr;
|
|
ftp_rqfpr[rqfar] = rqfpr;
|
|
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
|
|
|
|
return rqfar;
|
|
}
|
|
|
|
static void gfar_init_filer_table(struct gfar_private *priv)
|
|
{
|
|
int i = 0x0;
|
|
u32 rqfar = MAX_FILER_IDX;
|
|
u32 rqfcr = 0x0;
|
|
u32 rqfpr = FPR_FILER_MASK;
|
|
|
|
/* Default rule */
|
|
rqfcr = RQFCR_CMP_MATCH;
|
|
ftp_rqfcr[rqfar] = rqfcr;
|
|
ftp_rqfpr[rqfar] = rqfpr;
|
|
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
|
|
|
|
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6);
|
|
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6 | RQFPR_UDP);
|
|
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6 | RQFPR_TCP);
|
|
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4);
|
|
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP);
|
|
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP);
|
|
|
|
/* cur_filer_idx indicated the first non-masked rule */
|
|
priv->cur_filer_idx = rqfar;
|
|
|
|
/* Rest are masked rules */
|
|
rqfcr = RQFCR_CMP_NOMATCH;
|
|
for (i = 0; i < rqfar; i++) {
|
|
ftp_rqfcr[i] = rqfcr;
|
|
ftp_rqfpr[i] = rqfpr;
|
|
gfar_write_filer(priv, i, rqfcr, rqfpr);
|
|
}
|
|
}
|
|
|
|
static void gfar_detect_errata(struct gfar_private *priv)
|
|
{
|
|
struct device *dev = &priv->ofdev->dev;
|
|
unsigned int pvr = mfspr(SPRN_PVR);
|
|
unsigned int svr = mfspr(SPRN_SVR);
|
|
unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */
|
|
unsigned int rev = svr & 0xffff;
|
|
|
|
/* MPC8313 Rev 2.0 and higher; All MPC837x */
|
|
if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) ||
|
|
(pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
|
|
priv->errata |= GFAR_ERRATA_74;
|
|
|
|
/* MPC8313 and MPC837x all rev */
|
|
if ((pvr == 0x80850010 && mod == 0x80b0) ||
|
|
(pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
|
|
priv->errata |= GFAR_ERRATA_76;
|
|
|
|
/* MPC8313 and MPC837x all rev */
|
|
if ((pvr == 0x80850010 && mod == 0x80b0) ||
|
|
(pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
|
|
priv->errata |= GFAR_ERRATA_A002;
|
|
|
|
if (priv->errata)
|
|
dev_info(dev, "enabled errata workarounds, flags: 0x%x\n",
|
|
priv->errata);
|
|
}
|
|
|
|
/* Set up the ethernet device structure, private data,
|
|
* and anything else we need before we start */
|
|
static int gfar_probe(struct platform_device *ofdev,
|
|
const struct of_device_id *match)
|
|
{
|
|
u32 tempval;
|
|
struct net_device *dev = NULL;
|
|
struct gfar_private *priv = NULL;
|
|
struct gfar __iomem *regs = NULL;
|
|
int err = 0, i, grp_idx = 0;
|
|
int len_devname;
|
|
u32 rstat = 0, tstat = 0, rqueue = 0, tqueue = 0;
|
|
u32 isrg = 0;
|
|
u32 __iomem *baddr;
|
|
|
|
err = gfar_of_init(ofdev, &dev);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->ndev = dev;
|
|
priv->ofdev = ofdev;
|
|
priv->node = ofdev->dev.of_node;
|
|
SET_NETDEV_DEV(dev, &ofdev->dev);
|
|
|
|
spin_lock_init(&priv->bflock);
|
|
INIT_WORK(&priv->reset_task, gfar_reset_task);
|
|
|
|
dev_set_drvdata(&ofdev->dev, priv);
|
|
regs = priv->gfargrp[0].regs;
|
|
|
|
gfar_detect_errata(priv);
|
|
|
|
/* Stop the DMA engine now, in case it was running before */
|
|
/* (The firmware could have used it, and left it running). */
|
|
gfar_halt(dev);
|
|
|
|
/* Reset MAC layer */
|
|
gfar_write(®s->maccfg1, MACCFG1_SOFT_RESET);
|
|
|
|
/* We need to delay at least 3 TX clocks */
|
|
udelay(2);
|
|
|
|
tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
|
|
gfar_write(®s->maccfg1, tempval);
|
|
|
|
/* Initialize MACCFG2. */
|
|
tempval = MACCFG2_INIT_SETTINGS;
|
|
if (gfar_has_errata(priv, GFAR_ERRATA_74))
|
|
tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK;
|
|
gfar_write(®s->maccfg2, tempval);
|
|
|
|
/* Initialize ECNTRL */
|
|
gfar_write(®s->ecntrl, ECNTRL_INIT_SETTINGS);
|
|
|
|
/* Set the dev->base_addr to the gfar reg region */
|
|
dev->base_addr = (unsigned long) regs;
|
|
|
|
SET_NETDEV_DEV(dev, &ofdev->dev);
|
|
|
|
/* Fill in the dev structure */
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
dev->mtu = 1500;
|
|
dev->netdev_ops = &gfar_netdev_ops;
|
|
dev->ethtool_ops = &gfar_ethtool_ops;
|
|
|
|
/* Register for napi ...We are registering NAPI for each grp */
|
|
for (i = 0; i < priv->num_grps; i++)
|
|
netif_napi_add(dev, &priv->gfargrp[i].napi, gfar_poll, GFAR_DEV_WEIGHT);
|
|
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
|
|
priv->rx_csum_enable = 1;
|
|
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
|
|
} else
|
|
priv->rx_csum_enable = 0;
|
|
|
|
priv->vlgrp = NULL;
|
|
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN)
|
|
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
|
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
|
|
priv->extended_hash = 1;
|
|
priv->hash_width = 9;
|
|
|
|
priv->hash_regs[0] = ®s->igaddr0;
|
|
priv->hash_regs[1] = ®s->igaddr1;
|
|
priv->hash_regs[2] = ®s->igaddr2;
|
|
priv->hash_regs[3] = ®s->igaddr3;
|
|
priv->hash_regs[4] = ®s->igaddr4;
|
|
priv->hash_regs[5] = ®s->igaddr5;
|
|
priv->hash_regs[6] = ®s->igaddr6;
|
|
priv->hash_regs[7] = ®s->igaddr7;
|
|
priv->hash_regs[8] = ®s->gaddr0;
|
|
priv->hash_regs[9] = ®s->gaddr1;
|
|
priv->hash_regs[10] = ®s->gaddr2;
|
|
priv->hash_regs[11] = ®s->gaddr3;
|
|
priv->hash_regs[12] = ®s->gaddr4;
|
|
priv->hash_regs[13] = ®s->gaddr5;
|
|
priv->hash_regs[14] = ®s->gaddr6;
|
|
priv->hash_regs[15] = ®s->gaddr7;
|
|
|
|
} else {
|
|
priv->extended_hash = 0;
|
|
priv->hash_width = 8;
|
|
|
|
priv->hash_regs[0] = ®s->gaddr0;
|
|
priv->hash_regs[1] = ®s->gaddr1;
|
|
priv->hash_regs[2] = ®s->gaddr2;
|
|
priv->hash_regs[3] = ®s->gaddr3;
|
|
priv->hash_regs[4] = ®s->gaddr4;
|
|
priv->hash_regs[5] = ®s->gaddr5;
|
|
priv->hash_regs[6] = ®s->gaddr6;
|
|
priv->hash_regs[7] = ®s->gaddr7;
|
|
}
|
|
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_PADDING)
|
|
priv->padding = DEFAULT_PADDING;
|
|
else
|
|
priv->padding = 0;
|
|
|
|
if (dev->features & NETIF_F_IP_CSUM ||
|
|
priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
|
|
dev->hard_header_len += GMAC_FCB_LEN;
|
|
|
|
/* Program the isrg regs only if number of grps > 1 */
|
|
if (priv->num_grps > 1) {
|
|
baddr = ®s->isrg0;
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
isrg |= (priv->gfargrp[i].rx_bit_map << ISRG_SHIFT_RX);
|
|
isrg |= (priv->gfargrp[i].tx_bit_map << ISRG_SHIFT_TX);
|
|
gfar_write(baddr, isrg);
|
|
baddr++;
|
|
isrg = 0x0;
|
|
}
|
|
}
|
|
|
|
/* Need to reverse the bit maps as bit_map's MSB is q0
|
|
* but, for_each_set_bit parses from right to left, which
|
|
* basically reverses the queue numbers */
|
|
for (i = 0; i< priv->num_grps; i++) {
|
|
priv->gfargrp[i].tx_bit_map = reverse_bitmap(
|
|
priv->gfargrp[i].tx_bit_map, MAX_TX_QS);
|
|
priv->gfargrp[i].rx_bit_map = reverse_bitmap(
|
|
priv->gfargrp[i].rx_bit_map, MAX_RX_QS);
|
|
}
|
|
|
|
/* Calculate RSTAT, TSTAT, RQUEUE and TQUEUE values,
|
|
* also assign queues to groups */
|
|
for (grp_idx = 0; grp_idx < priv->num_grps; grp_idx++) {
|
|
priv->gfargrp[grp_idx].num_rx_queues = 0x0;
|
|
for_each_set_bit(i, &priv->gfargrp[grp_idx].rx_bit_map,
|
|
priv->num_rx_queues) {
|
|
priv->gfargrp[grp_idx].num_rx_queues++;
|
|
priv->rx_queue[i]->grp = &priv->gfargrp[grp_idx];
|
|
rstat = rstat | (RSTAT_CLEAR_RHALT >> i);
|
|
rqueue = rqueue | ((RQUEUE_EN0 | RQUEUE_EX0) >> i);
|
|
}
|
|
priv->gfargrp[grp_idx].num_tx_queues = 0x0;
|
|
for_each_set_bit(i, &priv->gfargrp[grp_idx].tx_bit_map,
|
|
priv->num_tx_queues) {
|
|
priv->gfargrp[grp_idx].num_tx_queues++;
|
|
priv->tx_queue[i]->grp = &priv->gfargrp[grp_idx];
|
|
tstat = tstat | (TSTAT_CLEAR_THALT >> i);
|
|
tqueue = tqueue | (TQUEUE_EN0 >> i);
|
|
}
|
|
priv->gfargrp[grp_idx].rstat = rstat;
|
|
priv->gfargrp[grp_idx].tstat = tstat;
|
|
rstat = tstat =0;
|
|
}
|
|
|
|
gfar_write(®s->rqueue, rqueue);
|
|
gfar_write(®s->tqueue, tqueue);
|
|
|
|
priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
|
|
|
|
/* Initializing some of the rx/tx queue level parameters */
|
|
for (i = 0; i < priv->num_tx_queues; i++) {
|
|
priv->tx_queue[i]->tx_ring_size = DEFAULT_TX_RING_SIZE;
|
|
priv->tx_queue[i]->num_txbdfree = DEFAULT_TX_RING_SIZE;
|
|
priv->tx_queue[i]->txcoalescing = DEFAULT_TX_COALESCE;
|
|
priv->tx_queue[i]->txic = DEFAULT_TXIC;
|
|
}
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++) {
|
|
priv->rx_queue[i]->rx_ring_size = DEFAULT_RX_RING_SIZE;
|
|
priv->rx_queue[i]->rxcoalescing = DEFAULT_RX_COALESCE;
|
|
priv->rx_queue[i]->rxic = DEFAULT_RXIC;
|
|
}
|
|
|
|
/* enable filer if using multiple RX queues*/
|
|
if(priv->num_rx_queues > 1)
|
|
priv->rx_filer_enable = 1;
|
|
/* Enable most messages by default */
|
|
priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1;
|
|
|
|
/* Carrier starts down, phylib will bring it up */
|
|
netif_carrier_off(dev);
|
|
|
|
err = register_netdev(dev);
|
|
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Cannot register net device, aborting.\n",
|
|
dev->name);
|
|
goto register_fail;
|
|
}
|
|
|
|
device_init_wakeup(&dev->dev,
|
|
priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
|
|
|
|
/* fill out IRQ number and name fields */
|
|
len_devname = strlen(dev->name);
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
strncpy(&priv->gfargrp[i].int_name_tx[0], dev->name,
|
|
len_devname);
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
|
|
strncpy(&priv->gfargrp[i].int_name_tx[len_devname],
|
|
"_g", sizeof("_g"));
|
|
priv->gfargrp[i].int_name_tx[
|
|
strlen(priv->gfargrp[i].int_name_tx)] = i+48;
|
|
strncpy(&priv->gfargrp[i].int_name_tx[strlen(
|
|
priv->gfargrp[i].int_name_tx)],
|
|
"_tx", sizeof("_tx") + 1);
|
|
|
|
strncpy(&priv->gfargrp[i].int_name_rx[0], dev->name,
|
|
len_devname);
|
|
strncpy(&priv->gfargrp[i].int_name_rx[len_devname],
|
|
"_g", sizeof("_g"));
|
|
priv->gfargrp[i].int_name_rx[
|
|
strlen(priv->gfargrp[i].int_name_rx)] = i+48;
|
|
strncpy(&priv->gfargrp[i].int_name_rx[strlen(
|
|
priv->gfargrp[i].int_name_rx)],
|
|
"_rx", sizeof("_rx") + 1);
|
|
|
|
strncpy(&priv->gfargrp[i].int_name_er[0], dev->name,
|
|
len_devname);
|
|
strncpy(&priv->gfargrp[i].int_name_er[len_devname],
|
|
"_g", sizeof("_g"));
|
|
priv->gfargrp[i].int_name_er[strlen(
|
|
priv->gfargrp[i].int_name_er)] = i+48;
|
|
strncpy(&priv->gfargrp[i].int_name_er[strlen(\
|
|
priv->gfargrp[i].int_name_er)],
|
|
"_er", sizeof("_er") + 1);
|
|
} else
|
|
priv->gfargrp[i].int_name_tx[len_devname] = '\0';
|
|
}
|
|
|
|
/* Initialize the filer table */
|
|
gfar_init_filer_table(priv);
|
|
|
|
/* Create all the sysfs files */
|
|
gfar_init_sysfs(dev);
|
|
|
|
/* Print out the device info */
|
|
printk(KERN_INFO DEVICE_NAME "%pM\n", dev->name, dev->dev_addr);
|
|
|
|
/* Even more device info helps when determining which kernel */
|
|
/* provided which set of benchmarks. */
|
|
printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
|
|
for (i = 0; i < priv->num_rx_queues; i++)
|
|
printk(KERN_INFO "%s: RX BD ring size for Q[%d]: %d\n",
|
|
dev->name, i, priv->rx_queue[i]->rx_ring_size);
|
|
for(i = 0; i < priv->num_tx_queues; i++)
|
|
printk(KERN_INFO "%s: TX BD ring size for Q[%d]: %d\n",
|
|
dev->name, i, priv->tx_queue[i]->tx_ring_size);
|
|
|
|
return 0;
|
|
|
|
register_fail:
|
|
unmap_group_regs(priv);
|
|
free_tx_pointers(priv);
|
|
free_rx_pointers(priv);
|
|
if (priv->phy_node)
|
|
of_node_put(priv->phy_node);
|
|
if (priv->tbi_node)
|
|
of_node_put(priv->tbi_node);
|
|
free_netdev(dev);
|
|
return err;
|
|
}
|
|
|
|
static int gfar_remove(struct platform_device *ofdev)
|
|
{
|
|
struct gfar_private *priv = dev_get_drvdata(&ofdev->dev);
|
|
|
|
if (priv->phy_node)
|
|
of_node_put(priv->phy_node);
|
|
if (priv->tbi_node)
|
|
of_node_put(priv->tbi_node);
|
|
|
|
dev_set_drvdata(&ofdev->dev, NULL);
|
|
|
|
unregister_netdev(priv->ndev);
|
|
unmap_group_regs(priv);
|
|
free_netdev(priv->ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int gfar_suspend(struct device *dev)
|
|
{
|
|
struct gfar_private *priv = dev_get_drvdata(dev);
|
|
struct net_device *ndev = priv->ndev;
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
unsigned long flags;
|
|
u32 tempval;
|
|
|
|
int magic_packet = priv->wol_en &&
|
|
(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
|
|
|
|
netif_device_detach(ndev);
|
|
|
|
if (netif_running(ndev)) {
|
|
|
|
local_irq_save(flags);
|
|
lock_tx_qs(priv);
|
|
lock_rx_qs(priv);
|
|
|
|
gfar_halt_nodisable(ndev);
|
|
|
|
/* Disable Tx, and Rx if wake-on-LAN is disabled. */
|
|
tempval = gfar_read(®s->maccfg1);
|
|
|
|
tempval &= ~MACCFG1_TX_EN;
|
|
|
|
if (!magic_packet)
|
|
tempval &= ~MACCFG1_RX_EN;
|
|
|
|
gfar_write(®s->maccfg1, tempval);
|
|
|
|
unlock_rx_qs(priv);
|
|
unlock_tx_qs(priv);
|
|
local_irq_restore(flags);
|
|
|
|
disable_napi(priv);
|
|
|
|
if (magic_packet) {
|
|
/* Enable interrupt on Magic Packet */
|
|
gfar_write(®s->imask, IMASK_MAG);
|
|
|
|
/* Enable Magic Packet mode */
|
|
tempval = gfar_read(®s->maccfg2);
|
|
tempval |= MACCFG2_MPEN;
|
|
gfar_write(®s->maccfg2, tempval);
|
|
} else {
|
|
phy_stop(priv->phydev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gfar_resume(struct device *dev)
|
|
{
|
|
struct gfar_private *priv = dev_get_drvdata(dev);
|
|
struct net_device *ndev = priv->ndev;
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
unsigned long flags;
|
|
u32 tempval;
|
|
int magic_packet = priv->wol_en &&
|
|
(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
|
|
|
|
if (!netif_running(ndev)) {
|
|
netif_device_attach(ndev);
|
|
return 0;
|
|
}
|
|
|
|
if (!magic_packet && priv->phydev)
|
|
phy_start(priv->phydev);
|
|
|
|
/* Disable Magic Packet mode, in case something
|
|
* else woke us up.
|
|
*/
|
|
local_irq_save(flags);
|
|
lock_tx_qs(priv);
|
|
lock_rx_qs(priv);
|
|
|
|
tempval = gfar_read(®s->maccfg2);
|
|
tempval &= ~MACCFG2_MPEN;
|
|
gfar_write(®s->maccfg2, tempval);
|
|
|
|
gfar_start(ndev);
|
|
|
|
unlock_rx_qs(priv);
|
|
unlock_tx_qs(priv);
|
|
local_irq_restore(flags);
|
|
|
|
netif_device_attach(ndev);
|
|
|
|
enable_napi(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gfar_restore(struct device *dev)
|
|
{
|
|
struct gfar_private *priv = dev_get_drvdata(dev);
|
|
struct net_device *ndev = priv->ndev;
|
|
|
|
if (!netif_running(ndev))
|
|
return 0;
|
|
|
|
gfar_init_bds(ndev);
|
|
init_registers(ndev);
|
|
gfar_set_mac_address(ndev);
|
|
gfar_init_mac(ndev);
|
|
gfar_start(ndev);
|
|
|
|
priv->oldlink = 0;
|
|
priv->oldspeed = 0;
|
|
priv->oldduplex = -1;
|
|
|
|
if (priv->phydev)
|
|
phy_start(priv->phydev);
|
|
|
|
netif_device_attach(ndev);
|
|
enable_napi(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dev_pm_ops gfar_pm_ops = {
|
|
.suspend = gfar_suspend,
|
|
.resume = gfar_resume,
|
|
.freeze = gfar_suspend,
|
|
.thaw = gfar_resume,
|
|
.restore = gfar_restore,
|
|
};
|
|
|
|
#define GFAR_PM_OPS (&gfar_pm_ops)
|
|
|
|
#else
|
|
|
|
#define GFAR_PM_OPS NULL
|
|
|
|
#endif
|
|
|
|
/* Reads the controller's registers to determine what interface
|
|
* connects it to the PHY.
|
|
*/
|
|
static phy_interface_t gfar_get_interface(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
u32 ecntrl;
|
|
|
|
ecntrl = gfar_read(®s->ecntrl);
|
|
|
|
if (ecntrl & ECNTRL_SGMII_MODE)
|
|
return PHY_INTERFACE_MODE_SGMII;
|
|
|
|
if (ecntrl & ECNTRL_TBI_MODE) {
|
|
if (ecntrl & ECNTRL_REDUCED_MODE)
|
|
return PHY_INTERFACE_MODE_RTBI;
|
|
else
|
|
return PHY_INTERFACE_MODE_TBI;
|
|
}
|
|
|
|
if (ecntrl & ECNTRL_REDUCED_MODE) {
|
|
if (ecntrl & ECNTRL_REDUCED_MII_MODE)
|
|
return PHY_INTERFACE_MODE_RMII;
|
|
else {
|
|
phy_interface_t interface = priv->interface;
|
|
|
|
/*
|
|
* This isn't autodetected right now, so it must
|
|
* be set by the device tree or platform code.
|
|
*/
|
|
if (interface == PHY_INTERFACE_MODE_RGMII_ID)
|
|
return PHY_INTERFACE_MODE_RGMII_ID;
|
|
|
|
return PHY_INTERFACE_MODE_RGMII;
|
|
}
|
|
}
|
|
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT)
|
|
return PHY_INTERFACE_MODE_GMII;
|
|
|
|
return PHY_INTERFACE_MODE_MII;
|
|
}
|
|
|
|
|
|
/* Initializes driver's PHY state, and attaches to the PHY.
|
|
* Returns 0 on success.
|
|
*/
|
|
static int init_phy(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
uint gigabit_support =
|
|
priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
|
|
SUPPORTED_1000baseT_Full : 0;
|
|
phy_interface_t interface;
|
|
|
|
priv->oldlink = 0;
|
|
priv->oldspeed = 0;
|
|
priv->oldduplex = -1;
|
|
|
|
interface = gfar_get_interface(dev);
|
|
|
|
priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
|
|
interface);
|
|
if (!priv->phydev)
|
|
priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link,
|
|
interface);
|
|
if (!priv->phydev) {
|
|
dev_err(&dev->dev, "could not attach to PHY\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (interface == PHY_INTERFACE_MODE_SGMII)
|
|
gfar_configure_serdes(dev);
|
|
|
|
/* Remove any features not supported by the controller */
|
|
priv->phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
|
|
priv->phydev->advertising = priv->phydev->supported;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialize TBI PHY interface for communicating with the
|
|
* SERDES lynx PHY on the chip. We communicate with this PHY
|
|
* through the MDIO bus on each controller, treating it as a
|
|
* "normal" PHY at the address found in the TBIPA register. We assume
|
|
* that the TBIPA register is valid. Either the MDIO bus code will set
|
|
* it to a value that doesn't conflict with other PHYs on the bus, or the
|
|
* value doesn't matter, as there are no other PHYs on the bus.
|
|
*/
|
|
static void gfar_configure_serdes(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct phy_device *tbiphy;
|
|
|
|
if (!priv->tbi_node) {
|
|
dev_warn(&dev->dev, "error: SGMII mode requires that the "
|
|
"device tree specify a tbi-handle\n");
|
|
return;
|
|
}
|
|
|
|
tbiphy = of_phy_find_device(priv->tbi_node);
|
|
if (!tbiphy) {
|
|
dev_err(&dev->dev, "error: Could not get TBI device\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If the link is already up, we must already be ok, and don't need to
|
|
* configure and reset the TBI<->SerDes link. Maybe U-Boot configured
|
|
* everything for us? Resetting it takes the link down and requires
|
|
* several seconds for it to come back.
|
|
*/
|
|
if (phy_read(tbiphy, MII_BMSR) & BMSR_LSTATUS)
|
|
return;
|
|
|
|
/* Single clk mode, mii mode off(for serdes communication) */
|
|
phy_write(tbiphy, MII_TBICON, TBICON_CLK_SELECT);
|
|
|
|
phy_write(tbiphy, MII_ADVERTISE,
|
|
ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
|
|
ADVERTISE_1000XPSE_ASYM);
|
|
|
|
phy_write(tbiphy, MII_BMCR, BMCR_ANENABLE |
|
|
BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000);
|
|
}
|
|
|
|
static void init_registers(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = NULL;
|
|
int i = 0;
|
|
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
regs = priv->gfargrp[i].regs;
|
|
/* Clear IEVENT */
|
|
gfar_write(®s->ievent, IEVENT_INIT_CLEAR);
|
|
|
|
/* Initialize IMASK */
|
|
gfar_write(®s->imask, IMASK_INIT_CLEAR);
|
|
}
|
|
|
|
regs = priv->gfargrp[0].regs;
|
|
/* Init hash registers to zero */
|
|
gfar_write(®s->igaddr0, 0);
|
|
gfar_write(®s->igaddr1, 0);
|
|
gfar_write(®s->igaddr2, 0);
|
|
gfar_write(®s->igaddr3, 0);
|
|
gfar_write(®s->igaddr4, 0);
|
|
gfar_write(®s->igaddr5, 0);
|
|
gfar_write(®s->igaddr6, 0);
|
|
gfar_write(®s->igaddr7, 0);
|
|
|
|
gfar_write(®s->gaddr0, 0);
|
|
gfar_write(®s->gaddr1, 0);
|
|
gfar_write(®s->gaddr2, 0);
|
|
gfar_write(®s->gaddr3, 0);
|
|
gfar_write(®s->gaddr4, 0);
|
|
gfar_write(®s->gaddr5, 0);
|
|
gfar_write(®s->gaddr6, 0);
|
|
gfar_write(®s->gaddr7, 0);
|
|
|
|
/* Zero out the rmon mib registers if it has them */
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
|
|
memset_io(&(regs->rmon), 0, sizeof (struct rmon_mib));
|
|
|
|
/* Mask off the CAM interrupts */
|
|
gfar_write(®s->rmon.cam1, 0xffffffff);
|
|
gfar_write(®s->rmon.cam2, 0xffffffff);
|
|
}
|
|
|
|
/* Initialize the max receive buffer length */
|
|
gfar_write(®s->mrblr, priv->rx_buffer_size);
|
|
|
|
/* Initialize the Minimum Frame Length Register */
|
|
gfar_write(®s->minflr, MINFLR_INIT_SETTINGS);
|
|
}
|
|
|
|
static int __gfar_is_rx_idle(struct gfar_private *priv)
|
|
{
|
|
u32 res;
|
|
|
|
/*
|
|
* Normaly TSEC should not hang on GRS commands, so we should
|
|
* actually wait for IEVENT_GRSC flag.
|
|
*/
|
|
if (likely(!gfar_has_errata(priv, GFAR_ERRATA_A002)))
|
|
return 0;
|
|
|
|
/*
|
|
* Read the eTSEC register at offset 0xD1C. If bits 7-14 are
|
|
* the same as bits 23-30, the eTSEC Rx is assumed to be idle
|
|
* and the Rx can be safely reset.
|
|
*/
|
|
res = gfar_read((void __iomem *)priv->gfargrp[0].regs + 0xd1c);
|
|
res &= 0x7f807f80;
|
|
if ((res & 0xffff) == (res >> 16))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Halt the receive and transmit queues */
|
|
static void gfar_halt_nodisable(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = NULL;
|
|
u32 tempval;
|
|
int i = 0;
|
|
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
regs = priv->gfargrp[i].regs;
|
|
/* Mask all interrupts */
|
|
gfar_write(®s->imask, IMASK_INIT_CLEAR);
|
|
|
|
/* Clear all interrupts */
|
|
gfar_write(®s->ievent, IEVENT_INIT_CLEAR);
|
|
}
|
|
|
|
regs = priv->gfargrp[0].regs;
|
|
/* Stop the DMA, and wait for it to stop */
|
|
tempval = gfar_read(®s->dmactrl);
|
|
if ((tempval & (DMACTRL_GRS | DMACTRL_GTS))
|
|
!= (DMACTRL_GRS | DMACTRL_GTS)) {
|
|
int ret;
|
|
|
|
tempval |= (DMACTRL_GRS | DMACTRL_GTS);
|
|
gfar_write(®s->dmactrl, tempval);
|
|
|
|
do {
|
|
ret = spin_event_timeout(((gfar_read(®s->ievent) &
|
|
(IEVENT_GRSC | IEVENT_GTSC)) ==
|
|
(IEVENT_GRSC | IEVENT_GTSC)), 1000000, 0);
|
|
if (!ret && !(gfar_read(®s->ievent) & IEVENT_GRSC))
|
|
ret = __gfar_is_rx_idle(priv);
|
|
} while (!ret);
|
|
}
|
|
}
|
|
|
|
/* Halt the receive and transmit queues */
|
|
void gfar_halt(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
u32 tempval;
|
|
|
|
gfar_halt_nodisable(dev);
|
|
|
|
/* Disable Rx and Tx */
|
|
tempval = gfar_read(®s->maccfg1);
|
|
tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
|
|
gfar_write(®s->maccfg1, tempval);
|
|
}
|
|
|
|
static void free_grp_irqs(struct gfar_priv_grp *grp)
|
|
{
|
|
free_irq(grp->interruptError, grp);
|
|
free_irq(grp->interruptTransmit, grp);
|
|
free_irq(grp->interruptReceive, grp);
|
|
}
|
|
|
|
void stop_gfar(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
phy_stop(priv->phydev);
|
|
|
|
|
|
/* Lock it down */
|
|
local_irq_save(flags);
|
|
lock_tx_qs(priv);
|
|
lock_rx_qs(priv);
|
|
|
|
gfar_halt(dev);
|
|
|
|
unlock_rx_qs(priv);
|
|
unlock_tx_qs(priv);
|
|
local_irq_restore(flags);
|
|
|
|
/* Free the IRQs */
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
|
|
for (i = 0; i < priv->num_grps; i++)
|
|
free_grp_irqs(&priv->gfargrp[i]);
|
|
} else {
|
|
for (i = 0; i < priv->num_grps; i++)
|
|
free_irq(priv->gfargrp[i].interruptTransmit,
|
|
&priv->gfargrp[i]);
|
|
}
|
|
|
|
free_skb_resources(priv);
|
|
}
|
|
|
|
static void free_skb_tx_queue(struct gfar_priv_tx_q *tx_queue)
|
|
{
|
|
struct txbd8 *txbdp;
|
|
struct gfar_private *priv = netdev_priv(tx_queue->dev);
|
|
int i, j;
|
|
|
|
txbdp = tx_queue->tx_bd_base;
|
|
|
|
for (i = 0; i < tx_queue->tx_ring_size; i++) {
|
|
if (!tx_queue->tx_skbuff[i])
|
|
continue;
|
|
|
|
dma_unmap_single(&priv->ofdev->dev, txbdp->bufPtr,
|
|
txbdp->length, DMA_TO_DEVICE);
|
|
txbdp->lstatus = 0;
|
|
for (j = 0; j < skb_shinfo(tx_queue->tx_skbuff[i])->nr_frags;
|
|
j++) {
|
|
txbdp++;
|
|
dma_unmap_page(&priv->ofdev->dev, txbdp->bufPtr,
|
|
txbdp->length, DMA_TO_DEVICE);
|
|
}
|
|
txbdp++;
|
|
dev_kfree_skb_any(tx_queue->tx_skbuff[i]);
|
|
tx_queue->tx_skbuff[i] = NULL;
|
|
}
|
|
kfree(tx_queue->tx_skbuff);
|
|
}
|
|
|
|
static void free_skb_rx_queue(struct gfar_priv_rx_q *rx_queue)
|
|
{
|
|
struct rxbd8 *rxbdp;
|
|
struct gfar_private *priv = netdev_priv(rx_queue->dev);
|
|
int i;
|
|
|
|
rxbdp = rx_queue->rx_bd_base;
|
|
|
|
for (i = 0; i < rx_queue->rx_ring_size; i++) {
|
|
if (rx_queue->rx_skbuff[i]) {
|
|
dma_unmap_single(&priv->ofdev->dev,
|
|
rxbdp->bufPtr, priv->rx_buffer_size,
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(rx_queue->rx_skbuff[i]);
|
|
rx_queue->rx_skbuff[i] = NULL;
|
|
}
|
|
rxbdp->lstatus = 0;
|
|
rxbdp->bufPtr = 0;
|
|
rxbdp++;
|
|
}
|
|
kfree(rx_queue->rx_skbuff);
|
|
}
|
|
|
|
/* If there are any tx skbs or rx skbs still around, free them.
|
|
* Then free tx_skbuff and rx_skbuff */
|
|
static void free_skb_resources(struct gfar_private *priv)
|
|
{
|
|
struct gfar_priv_tx_q *tx_queue = NULL;
|
|
struct gfar_priv_rx_q *rx_queue = NULL;
|
|
int i;
|
|
|
|
/* Go through all the buffer descriptors and free their data buffers */
|
|
for (i = 0; i < priv->num_tx_queues; i++) {
|
|
tx_queue = priv->tx_queue[i];
|
|
if(tx_queue->tx_skbuff)
|
|
free_skb_tx_queue(tx_queue);
|
|
}
|
|
|
|
for (i = 0; i < priv->num_rx_queues; i++) {
|
|
rx_queue = priv->rx_queue[i];
|
|
if(rx_queue->rx_skbuff)
|
|
free_skb_rx_queue(rx_queue);
|
|
}
|
|
|
|
dma_free_coherent(&priv->ofdev->dev,
|
|
sizeof(struct txbd8) * priv->total_tx_ring_size +
|
|
sizeof(struct rxbd8) * priv->total_rx_ring_size,
|
|
priv->tx_queue[0]->tx_bd_base,
|
|
priv->tx_queue[0]->tx_bd_dma_base);
|
|
skb_queue_purge(&priv->rx_recycle);
|
|
}
|
|
|
|
void gfar_start(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
u32 tempval;
|
|
int i = 0;
|
|
|
|
/* Enable Rx and Tx in MACCFG1 */
|
|
tempval = gfar_read(®s->maccfg1);
|
|
tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
|
|
gfar_write(®s->maccfg1, tempval);
|
|
|
|
/* Initialize DMACTRL to have WWR and WOP */
|
|
tempval = gfar_read(®s->dmactrl);
|
|
tempval |= DMACTRL_INIT_SETTINGS;
|
|
gfar_write(®s->dmactrl, tempval);
|
|
|
|
/* Make sure we aren't stopped */
|
|
tempval = gfar_read(®s->dmactrl);
|
|
tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
|
|
gfar_write(®s->dmactrl, tempval);
|
|
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
regs = priv->gfargrp[i].regs;
|
|
/* Clear THLT/RHLT, so that the DMA starts polling now */
|
|
gfar_write(®s->tstat, priv->gfargrp[i].tstat);
|
|
gfar_write(®s->rstat, priv->gfargrp[i].rstat);
|
|
/* Unmask the interrupts we look for */
|
|
gfar_write(®s->imask, IMASK_DEFAULT);
|
|
}
|
|
|
|
dev->trans_start = jiffies; /* prevent tx timeout */
|
|
}
|
|
|
|
void gfar_configure_coalescing(struct gfar_private *priv,
|
|
unsigned long tx_mask, unsigned long rx_mask)
|
|
{
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
u32 __iomem *baddr;
|
|
int i = 0;
|
|
|
|
/* Backward compatible case ---- even if we enable
|
|
* multiple queues, there's only single reg to program
|
|
*/
|
|
gfar_write(®s->txic, 0);
|
|
if(likely(priv->tx_queue[0]->txcoalescing))
|
|
gfar_write(®s->txic, priv->tx_queue[0]->txic);
|
|
|
|
gfar_write(®s->rxic, 0);
|
|
if(unlikely(priv->rx_queue[0]->rxcoalescing))
|
|
gfar_write(®s->rxic, priv->rx_queue[0]->rxic);
|
|
|
|
if (priv->mode == MQ_MG_MODE) {
|
|
baddr = ®s->txic0;
|
|
for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
|
|
if (likely(priv->tx_queue[i]->txcoalescing)) {
|
|
gfar_write(baddr + i, 0);
|
|
gfar_write(baddr + i, priv->tx_queue[i]->txic);
|
|
}
|
|
}
|
|
|
|
baddr = ®s->rxic0;
|
|
for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
|
|
if (likely(priv->rx_queue[i]->rxcoalescing)) {
|
|
gfar_write(baddr + i, 0);
|
|
gfar_write(baddr + i, priv->rx_queue[i]->rxic);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int register_grp_irqs(struct gfar_priv_grp *grp)
|
|
{
|
|
struct gfar_private *priv = grp->priv;
|
|
struct net_device *dev = priv->ndev;
|
|
int err;
|
|
|
|
/* If the device has multiple interrupts, register for
|
|
* them. Otherwise, only register for the one */
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
|
|
/* Install our interrupt handlers for Error,
|
|
* Transmit, and Receive */
|
|
if ((err = request_irq(grp->interruptError, gfar_error, 0,
|
|
grp->int_name_er,grp)) < 0) {
|
|
if (netif_msg_intr(priv))
|
|
printk(KERN_ERR "%s: Can't get IRQ %d\n",
|
|
dev->name, grp->interruptError);
|
|
|
|
goto err_irq_fail;
|
|
}
|
|
|
|
if ((err = request_irq(grp->interruptTransmit, gfar_transmit,
|
|
0, grp->int_name_tx, grp)) < 0) {
|
|
if (netif_msg_intr(priv))
|
|
printk(KERN_ERR "%s: Can't get IRQ %d\n",
|
|
dev->name, grp->interruptTransmit);
|
|
goto tx_irq_fail;
|
|
}
|
|
|
|
if ((err = request_irq(grp->interruptReceive, gfar_receive, 0,
|
|
grp->int_name_rx, grp)) < 0) {
|
|
if (netif_msg_intr(priv))
|
|
printk(KERN_ERR "%s: Can't get IRQ %d\n",
|
|
dev->name, grp->interruptReceive);
|
|
goto rx_irq_fail;
|
|
}
|
|
} else {
|
|
if ((err = request_irq(grp->interruptTransmit, gfar_interrupt, 0,
|
|
grp->int_name_tx, grp)) < 0) {
|
|
if (netif_msg_intr(priv))
|
|
printk(KERN_ERR "%s: Can't get IRQ %d\n",
|
|
dev->name, grp->interruptTransmit);
|
|
goto err_irq_fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
rx_irq_fail:
|
|
free_irq(grp->interruptTransmit, grp);
|
|
tx_irq_fail:
|
|
free_irq(grp->interruptError, grp);
|
|
err_irq_fail:
|
|
return err;
|
|
|
|
}
|
|
|
|
/* Bring the controller up and running */
|
|
int startup_gfar(struct net_device *ndev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(ndev);
|
|
struct gfar __iomem *regs = NULL;
|
|
int err, i, j;
|
|
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
regs= priv->gfargrp[i].regs;
|
|
gfar_write(®s->imask, IMASK_INIT_CLEAR);
|
|
}
|
|
|
|
regs= priv->gfargrp[0].regs;
|
|
err = gfar_alloc_skb_resources(ndev);
|
|
if (err)
|
|
return err;
|
|
|
|
gfar_init_mac(ndev);
|
|
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
err = register_grp_irqs(&priv->gfargrp[i]);
|
|
if (err) {
|
|
for (j = 0; j < i; j++)
|
|
free_grp_irqs(&priv->gfargrp[j]);
|
|
goto irq_fail;
|
|
}
|
|
}
|
|
|
|
/* Start the controller */
|
|
gfar_start(ndev);
|
|
|
|
phy_start(priv->phydev);
|
|
|
|
gfar_configure_coalescing(priv, 0xFF, 0xFF);
|
|
|
|
return 0;
|
|
|
|
irq_fail:
|
|
free_skb_resources(priv);
|
|
return err;
|
|
}
|
|
|
|
/* Called when something needs to use the ethernet device */
|
|
/* Returns 0 for success. */
|
|
static int gfar_enet_open(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
enable_napi(priv);
|
|
|
|
skb_queue_head_init(&priv->rx_recycle);
|
|
|
|
/* Initialize a bunch of registers */
|
|
init_registers(dev);
|
|
|
|
gfar_set_mac_address(dev);
|
|
|
|
err = init_phy(dev);
|
|
|
|
if (err) {
|
|
disable_napi(priv);
|
|
return err;
|
|
}
|
|
|
|
err = startup_gfar(dev);
|
|
if (err) {
|
|
disable_napi(priv);
|
|
return err;
|
|
}
|
|
|
|
netif_tx_start_all_queues(dev);
|
|
|
|
device_set_wakeup_enable(&dev->dev, priv->wol_en);
|
|
|
|
return err;
|
|
}
|
|
|
|
static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb)
|
|
{
|
|
struct txfcb *fcb = (struct txfcb *)skb_push(skb, GMAC_FCB_LEN);
|
|
|
|
memset(fcb, 0, GMAC_FCB_LEN);
|
|
|
|
return fcb;
|
|
}
|
|
|
|
static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
|
|
{
|
|
u8 flags = 0;
|
|
|
|
/* If we're here, it's a IP packet with a TCP or UDP
|
|
* payload. We set it to checksum, using a pseudo-header
|
|
* we provide
|
|
*/
|
|
flags = TXFCB_DEFAULT;
|
|
|
|
/* Tell the controller what the protocol is */
|
|
/* And provide the already calculated phcs */
|
|
if (ip_hdr(skb)->protocol == IPPROTO_UDP) {
|
|
flags |= TXFCB_UDP;
|
|
fcb->phcs = udp_hdr(skb)->check;
|
|
} else
|
|
fcb->phcs = tcp_hdr(skb)->check;
|
|
|
|
/* l3os is the distance between the start of the
|
|
* frame (skb->data) and the start of the IP hdr.
|
|
* l4os is the distance between the start of the
|
|
* l3 hdr and the l4 hdr */
|
|
fcb->l3os = (u16)(skb_network_offset(skb) - GMAC_FCB_LEN);
|
|
fcb->l4os = skb_network_header_len(skb);
|
|
|
|
fcb->flags = flags;
|
|
}
|
|
|
|
void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
|
|
{
|
|
fcb->flags |= TXFCB_VLN;
|
|
fcb->vlctl = vlan_tx_tag_get(skb);
|
|
}
|
|
|
|
static inline struct txbd8 *skip_txbd(struct txbd8 *bdp, int stride,
|
|
struct txbd8 *base, int ring_size)
|
|
{
|
|
struct txbd8 *new_bd = bdp + stride;
|
|
|
|
return (new_bd >= (base + ring_size)) ? (new_bd - ring_size) : new_bd;
|
|
}
|
|
|
|
static inline struct txbd8 *next_txbd(struct txbd8 *bdp, struct txbd8 *base,
|
|
int ring_size)
|
|
{
|
|
return skip_txbd(bdp, 1, base, ring_size);
|
|
}
|
|
|
|
/* This is called by the kernel when a frame is ready for transmission. */
|
|
/* It is pointed to by the dev->hard_start_xmit function pointer */
|
|
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar_priv_tx_q *tx_queue = NULL;
|
|
struct netdev_queue *txq;
|
|
struct gfar __iomem *regs = NULL;
|
|
struct txfcb *fcb = NULL;
|
|
struct txbd8 *txbdp, *txbdp_start, *base, *txbdp_tstamp = NULL;
|
|
u32 lstatus;
|
|
int i, rq = 0, do_tstamp = 0;
|
|
u32 bufaddr;
|
|
unsigned long flags;
|
|
unsigned int nr_frags, nr_txbds, length;
|
|
|
|
/*
|
|
* TOE=1 frames larger than 2500 bytes may see excess delays
|
|
* before start of transmission.
|
|
*/
|
|
if (unlikely(gfar_has_errata(priv, GFAR_ERRATA_76) &&
|
|
skb->ip_summed == CHECKSUM_PARTIAL &&
|
|
skb->len > 2500)) {
|
|
int ret;
|
|
|
|
ret = skb_checksum_help(skb);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
rq = skb->queue_mapping;
|
|
tx_queue = priv->tx_queue[rq];
|
|
txq = netdev_get_tx_queue(dev, rq);
|
|
base = tx_queue->tx_bd_base;
|
|
regs = tx_queue->grp->regs;
|
|
|
|
/* check if time stamp should be generated */
|
|
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
|
|
priv->hwts_tx_en))
|
|
do_tstamp = 1;
|
|
|
|
/* make space for additional header when fcb is needed */
|
|
if (((skb->ip_summed == CHECKSUM_PARTIAL) ||
|
|
(priv->vlgrp && vlan_tx_tag_present(skb)) ||
|
|
unlikely(do_tstamp)) &&
|
|
(skb_headroom(skb) < GMAC_FCB_LEN)) {
|
|
struct sk_buff *skb_new;
|
|
|
|
skb_new = skb_realloc_headroom(skb, GMAC_FCB_LEN);
|
|
if (!skb_new) {
|
|
dev->stats.tx_errors++;
|
|
kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
kfree_skb(skb);
|
|
skb = skb_new;
|
|
}
|
|
|
|
/* total number of fragments in the SKB */
|
|
nr_frags = skb_shinfo(skb)->nr_frags;
|
|
|
|
/* calculate the required number of TxBDs for this skb */
|
|
if (unlikely(do_tstamp))
|
|
nr_txbds = nr_frags + 2;
|
|
else
|
|
nr_txbds = nr_frags + 1;
|
|
|
|
/* check if there is space to queue this packet */
|
|
if (nr_txbds > tx_queue->num_txbdfree) {
|
|
/* no space, stop the queue */
|
|
netif_tx_stop_queue(txq);
|
|
dev->stats.tx_fifo_errors++;
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Update transmit stats */
|
|
txq->tx_bytes += skb->len;
|
|
txq->tx_packets ++;
|
|
|
|
txbdp = txbdp_start = tx_queue->cur_tx;
|
|
lstatus = txbdp->lstatus;
|
|
|
|
/* Time stamp insertion requires one additional TxBD */
|
|
if (unlikely(do_tstamp))
|
|
txbdp_tstamp = txbdp = next_txbd(txbdp, base,
|
|
tx_queue->tx_ring_size);
|
|
|
|
if (nr_frags == 0) {
|
|
if (unlikely(do_tstamp))
|
|
txbdp_tstamp->lstatus |= BD_LFLAG(TXBD_LAST |
|
|
TXBD_INTERRUPT);
|
|
else
|
|
lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
|
|
} else {
|
|
/* Place the fragment addresses and lengths into the TxBDs */
|
|
for (i = 0; i < nr_frags; i++) {
|
|
/* Point at the next BD, wrapping as needed */
|
|
txbdp = next_txbd(txbdp, base, tx_queue->tx_ring_size);
|
|
|
|
length = skb_shinfo(skb)->frags[i].size;
|
|
|
|
lstatus = txbdp->lstatus | length |
|
|
BD_LFLAG(TXBD_READY);
|
|
|
|
/* Handle the last BD specially */
|
|
if (i == nr_frags - 1)
|
|
lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
|
|
|
|
bufaddr = dma_map_page(&priv->ofdev->dev,
|
|
skb_shinfo(skb)->frags[i].page,
|
|
skb_shinfo(skb)->frags[i].page_offset,
|
|
length,
|
|
DMA_TO_DEVICE);
|
|
|
|
/* set the TxBD length and buffer pointer */
|
|
txbdp->bufPtr = bufaddr;
|
|
txbdp->lstatus = lstatus;
|
|
}
|
|
|
|
lstatus = txbdp_start->lstatus;
|
|
}
|
|
|
|
/* Set up checksumming */
|
|
if (CHECKSUM_PARTIAL == skb->ip_summed) {
|
|
fcb = gfar_add_fcb(skb);
|
|
lstatus |= BD_LFLAG(TXBD_TOE);
|
|
gfar_tx_checksum(skb, fcb);
|
|
}
|
|
|
|
if (priv->vlgrp && vlan_tx_tag_present(skb)) {
|
|
if (unlikely(NULL == fcb)) {
|
|
fcb = gfar_add_fcb(skb);
|
|
lstatus |= BD_LFLAG(TXBD_TOE);
|
|
}
|
|
|
|
gfar_tx_vlan(skb, fcb);
|
|
}
|
|
|
|
/* Setup tx hardware time stamping if requested */
|
|
if (unlikely(do_tstamp)) {
|
|
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
|
|
if (fcb == NULL)
|
|
fcb = gfar_add_fcb(skb);
|
|
fcb->ptp = 1;
|
|
lstatus |= BD_LFLAG(TXBD_TOE);
|
|
}
|
|
|
|
txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
|
|
skb_headlen(skb), DMA_TO_DEVICE);
|
|
|
|
/*
|
|
* If time stamping is requested one additional TxBD must be set up. The
|
|
* first TxBD points to the FCB and must have a data length of
|
|
* GMAC_FCB_LEN. The second TxBD points to the actual frame data with
|
|
* the full frame length.
|
|
*/
|
|
if (unlikely(do_tstamp)) {
|
|
txbdp_tstamp->bufPtr = txbdp_start->bufPtr + GMAC_FCB_LEN;
|
|
txbdp_tstamp->lstatus |= BD_LFLAG(TXBD_READY) |
|
|
(skb_headlen(skb) - GMAC_FCB_LEN);
|
|
lstatus |= BD_LFLAG(TXBD_CRC | TXBD_READY) | GMAC_FCB_LEN;
|
|
} else {
|
|
lstatus |= BD_LFLAG(TXBD_CRC | TXBD_READY) | skb_headlen(skb);
|
|
}
|
|
|
|
/*
|
|
* We can work in parallel with gfar_clean_tx_ring(), except
|
|
* when modifying num_txbdfree. Note that we didn't grab the lock
|
|
* when we were reading the num_txbdfree and checking for available
|
|
* space, that's because outside of this function it can only grow,
|
|
* and once we've got needed space, it cannot suddenly disappear.
|
|
*
|
|
* The lock also protects us from gfar_error(), which can modify
|
|
* regs->tstat and thus retrigger the transfers, which is why we
|
|
* also must grab the lock before setting ready bit for the first
|
|
* to be transmitted BD.
|
|
*/
|
|
spin_lock_irqsave(&tx_queue->txlock, flags);
|
|
|
|
/*
|
|
* The powerpc-specific eieio() is used, as wmb() has too strong
|
|
* semantics (it requires synchronization between cacheable and
|
|
* uncacheable mappings, which eieio doesn't provide and which we
|
|
* don't need), thus requiring a more expensive sync instruction. At
|
|
* some point, the set of architecture-independent barrier functions
|
|
* should be expanded to include weaker barriers.
|
|
*/
|
|
eieio();
|
|
|
|
txbdp_start->lstatus = lstatus;
|
|
|
|
eieio(); /* force lstatus write before tx_skbuff */
|
|
|
|
tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
|
|
|
|
/* Update the current skb pointer to the next entry we will use
|
|
* (wrapping if necessary) */
|
|
tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &
|
|
TX_RING_MOD_MASK(tx_queue->tx_ring_size);
|
|
|
|
tx_queue->cur_tx = next_txbd(txbdp, base, tx_queue->tx_ring_size);
|
|
|
|
/* reduce TxBD free count */
|
|
tx_queue->num_txbdfree -= (nr_txbds);
|
|
|
|
/* If the next BD still needs to be cleaned up, then the bds
|
|
are full. We need to tell the kernel to stop sending us stuff. */
|
|
if (!tx_queue->num_txbdfree) {
|
|
netif_tx_stop_queue(txq);
|
|
|
|
dev->stats.tx_fifo_errors++;
|
|
}
|
|
|
|
/* Tell the DMA to go go go */
|
|
gfar_write(®s->tstat, TSTAT_CLEAR_THALT >> tx_queue->qindex);
|
|
|
|
/* Unlock priv */
|
|
spin_unlock_irqrestore(&tx_queue->txlock, flags);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Stops the kernel queue, and halts the controller */
|
|
static int gfar_close(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
disable_napi(priv);
|
|
|
|
cancel_work_sync(&priv->reset_task);
|
|
stop_gfar(dev);
|
|
|
|
/* Disconnect from the PHY */
|
|
phy_disconnect(priv->phydev);
|
|
priv->phydev = NULL;
|
|
|
|
netif_tx_stop_all_queues(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Changes the mac address if the controller is not running. */
|
|
static int gfar_set_mac_address(struct net_device *dev)
|
|
{
|
|
gfar_set_mac_for_addr(dev, 0, dev->dev_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Enables and disables VLAN insertion/extraction */
|
|
static void gfar_vlan_rx_register(struct net_device *dev,
|
|
struct vlan_group *grp)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = NULL;
|
|
unsigned long flags;
|
|
u32 tempval;
|
|
|
|
regs = priv->gfargrp[0].regs;
|
|
local_irq_save(flags);
|
|
lock_rx_qs(priv);
|
|
|
|
priv->vlgrp = grp;
|
|
|
|
if (grp) {
|
|
/* Enable VLAN tag insertion */
|
|
tempval = gfar_read(®s->tctrl);
|
|
tempval |= TCTRL_VLINS;
|
|
|
|
gfar_write(®s->tctrl, tempval);
|
|
|
|
/* Enable VLAN tag extraction */
|
|
tempval = gfar_read(®s->rctrl);
|
|
tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
|
|
gfar_write(®s->rctrl, tempval);
|
|
} else {
|
|
/* Disable VLAN tag insertion */
|
|
tempval = gfar_read(®s->tctrl);
|
|
tempval &= ~TCTRL_VLINS;
|
|
gfar_write(®s->tctrl, tempval);
|
|
|
|
/* Disable VLAN tag extraction */
|
|
tempval = gfar_read(®s->rctrl);
|
|
tempval &= ~RCTRL_VLEX;
|
|
/* If parse is no longer required, then disable parser */
|
|
if (tempval & RCTRL_REQ_PARSER)
|
|
tempval |= RCTRL_PRSDEP_INIT;
|
|
else
|
|
tempval &= ~RCTRL_PRSDEP_INIT;
|
|
gfar_write(®s->rctrl, tempval);
|
|
}
|
|
|
|
gfar_change_mtu(dev, dev->mtu);
|
|
|
|
unlock_rx_qs(priv);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static int gfar_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
int tempsize, tempval;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
int oldsize = priv->rx_buffer_size;
|
|
int frame_size = new_mtu + ETH_HLEN;
|
|
|
|
if (priv->vlgrp)
|
|
frame_size += VLAN_HLEN;
|
|
|
|
if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) {
|
|
if (netif_msg_drv(priv))
|
|
printk(KERN_ERR "%s: Invalid MTU setting\n",
|
|
dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (gfar_uses_fcb(priv))
|
|
frame_size += GMAC_FCB_LEN;
|
|
|
|
frame_size += priv->padding;
|
|
|
|
tempsize =
|
|
(frame_size & ~(INCREMENTAL_BUFFER_SIZE - 1)) +
|
|
INCREMENTAL_BUFFER_SIZE;
|
|
|
|
/* Only stop and start the controller if it isn't already
|
|
* stopped, and we changed something */
|
|
if ((oldsize != tempsize) && (dev->flags & IFF_UP))
|
|
stop_gfar(dev);
|
|
|
|
priv->rx_buffer_size = tempsize;
|
|
|
|
dev->mtu = new_mtu;
|
|
|
|
gfar_write(®s->mrblr, priv->rx_buffer_size);
|
|
gfar_write(®s->maxfrm, priv->rx_buffer_size);
|
|
|
|
/* If the mtu is larger than the max size for standard
|
|
* ethernet frames (ie, a jumbo frame), then set maccfg2
|
|
* to allow huge frames, and to check the length */
|
|
tempval = gfar_read(®s->maccfg2);
|
|
|
|
if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE ||
|
|
gfar_has_errata(priv, GFAR_ERRATA_74))
|
|
tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
|
|
else
|
|
tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
|
|
|
|
gfar_write(®s->maccfg2, tempval);
|
|
|
|
if ((oldsize != tempsize) && (dev->flags & IFF_UP))
|
|
startup_gfar(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* gfar_reset_task gets scheduled when a packet has not been
|
|
* transmitted after a set amount of time.
|
|
* For now, assume that clearing out all the structures, and
|
|
* starting over will fix the problem.
|
|
*/
|
|
static void gfar_reset_task(struct work_struct *work)
|
|
{
|
|
struct gfar_private *priv = container_of(work, struct gfar_private,
|
|
reset_task);
|
|
struct net_device *dev = priv->ndev;
|
|
|
|
if (dev->flags & IFF_UP) {
|
|
netif_tx_stop_all_queues(dev);
|
|
stop_gfar(dev);
|
|
startup_gfar(dev);
|
|
netif_tx_start_all_queues(dev);
|
|
}
|
|
|
|
netif_tx_schedule_all(dev);
|
|
}
|
|
|
|
static void gfar_timeout(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
dev->stats.tx_errors++;
|
|
schedule_work(&priv->reset_task);
|
|
}
|
|
|
|
static void gfar_align_skb(struct sk_buff *skb)
|
|
{
|
|
/* We need the data buffer to be aligned properly. We will reserve
|
|
* as many bytes as needed to align the data properly
|
|
*/
|
|
skb_reserve(skb, RXBUF_ALIGNMENT -
|
|
(((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1)));
|
|
}
|
|
|
|
/* Interrupt Handler for Transmit complete */
|
|
static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
|
|
{
|
|
struct net_device *dev = tx_queue->dev;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar_priv_rx_q *rx_queue = NULL;
|
|
struct txbd8 *bdp, *next = NULL;
|
|
struct txbd8 *lbdp = NULL;
|
|
struct txbd8 *base = tx_queue->tx_bd_base;
|
|
struct sk_buff *skb;
|
|
int skb_dirtytx;
|
|
int tx_ring_size = tx_queue->tx_ring_size;
|
|
int frags = 0, nr_txbds = 0;
|
|
int i;
|
|
int howmany = 0;
|
|
u32 lstatus;
|
|
size_t buflen;
|
|
|
|
rx_queue = priv->rx_queue[tx_queue->qindex];
|
|
bdp = tx_queue->dirty_tx;
|
|
skb_dirtytx = tx_queue->skb_dirtytx;
|
|
|
|
while ((skb = tx_queue->tx_skbuff[skb_dirtytx])) {
|
|
unsigned long flags;
|
|
|
|
frags = skb_shinfo(skb)->nr_frags;
|
|
|
|
/*
|
|
* When time stamping, one additional TxBD must be freed.
|
|
* Also, we need to dma_unmap_single() the TxPAL.
|
|
*/
|
|
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
|
|
nr_txbds = frags + 2;
|
|
else
|
|
nr_txbds = frags + 1;
|
|
|
|
lbdp = skip_txbd(bdp, nr_txbds - 1, base, tx_ring_size);
|
|
|
|
lstatus = lbdp->lstatus;
|
|
|
|
/* Only clean completed frames */
|
|
if ((lstatus & BD_LFLAG(TXBD_READY)) &&
|
|
(lstatus & BD_LENGTH_MASK))
|
|
break;
|
|
|
|
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) {
|
|
next = next_txbd(bdp, base, tx_ring_size);
|
|
buflen = next->length + GMAC_FCB_LEN;
|
|
} else
|
|
buflen = bdp->length;
|
|
|
|
dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr,
|
|
buflen, DMA_TO_DEVICE);
|
|
|
|
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) {
|
|
struct skb_shared_hwtstamps shhwtstamps;
|
|
u64 *ns = (u64*) (((u32)skb->data + 0x10) & ~0x7);
|
|
memset(&shhwtstamps, 0, sizeof(shhwtstamps));
|
|
shhwtstamps.hwtstamp = ns_to_ktime(*ns);
|
|
skb_tstamp_tx(skb, &shhwtstamps);
|
|
bdp->lstatus &= BD_LFLAG(TXBD_WRAP);
|
|
bdp = next;
|
|
}
|
|
|
|
bdp->lstatus &= BD_LFLAG(TXBD_WRAP);
|
|
bdp = next_txbd(bdp, base, tx_ring_size);
|
|
|
|
for (i = 0; i < frags; i++) {
|
|
dma_unmap_page(&priv->ofdev->dev,
|
|
bdp->bufPtr,
|
|
bdp->length,
|
|
DMA_TO_DEVICE);
|
|
bdp->lstatus &= BD_LFLAG(TXBD_WRAP);
|
|
bdp = next_txbd(bdp, base, tx_ring_size);
|
|
}
|
|
|
|
/*
|
|
* If there's room in the queue (limit it to rx_buffer_size)
|
|
* we add this skb back into the pool, if it's the right size
|
|
*/
|
|
if (skb_queue_len(&priv->rx_recycle) < rx_queue->rx_ring_size &&
|
|
skb_recycle_check(skb, priv->rx_buffer_size +
|
|
RXBUF_ALIGNMENT)) {
|
|
gfar_align_skb(skb);
|
|
__skb_queue_head(&priv->rx_recycle, skb);
|
|
} else
|
|
dev_kfree_skb_any(skb);
|
|
|
|
tx_queue->tx_skbuff[skb_dirtytx] = NULL;
|
|
|
|
skb_dirtytx = (skb_dirtytx + 1) &
|
|
TX_RING_MOD_MASK(tx_ring_size);
|
|
|
|
howmany++;
|
|
spin_lock_irqsave(&tx_queue->txlock, flags);
|
|
tx_queue->num_txbdfree += nr_txbds;
|
|
spin_unlock_irqrestore(&tx_queue->txlock, flags);
|
|
}
|
|
|
|
/* If we freed a buffer, we can restart transmission, if necessary */
|
|
if (__netif_subqueue_stopped(dev, tx_queue->qindex) && tx_queue->num_txbdfree)
|
|
netif_wake_subqueue(dev, tx_queue->qindex);
|
|
|
|
/* Update dirty indicators */
|
|
tx_queue->skb_dirtytx = skb_dirtytx;
|
|
tx_queue->dirty_tx = bdp;
|
|
|
|
return howmany;
|
|
}
|
|
|
|
static void gfar_schedule_cleanup(struct gfar_priv_grp *gfargrp)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gfargrp->grplock, flags);
|
|
if (napi_schedule_prep(&gfargrp->napi)) {
|
|
gfar_write(&gfargrp->regs->imask, IMASK_RTX_DISABLED);
|
|
__napi_schedule(&gfargrp->napi);
|
|
} else {
|
|
/*
|
|
* Clear IEVENT, so interrupts aren't called again
|
|
* because of the packets that have already arrived.
|
|
*/
|
|
gfar_write(&gfargrp->regs->ievent, IEVENT_RTX_MASK);
|
|
}
|
|
spin_unlock_irqrestore(&gfargrp->grplock, flags);
|
|
|
|
}
|
|
|
|
/* Interrupt Handler for Transmit complete */
|
|
static irqreturn_t gfar_transmit(int irq, void *grp_id)
|
|
{
|
|
gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct net_device *dev = rx_queue->dev;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
dma_addr_t buf;
|
|
|
|
buf = dma_map_single(&priv->ofdev->dev, skb->data,
|
|
priv->rx_buffer_size, DMA_FROM_DEVICE);
|
|
gfar_init_rxbdp(rx_queue, bdp, buf);
|
|
}
|
|
|
|
static struct sk_buff * gfar_alloc_skb(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct sk_buff *skb = NULL;
|
|
|
|
skb = netdev_alloc_skb(dev, priv->rx_buffer_size + RXBUF_ALIGNMENT);
|
|
if (!skb)
|
|
return NULL;
|
|
|
|
gfar_align_skb(skb);
|
|
|
|
return skb;
|
|
}
|
|
|
|
struct sk_buff * gfar_new_skb(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct sk_buff *skb = NULL;
|
|
|
|
skb = __skb_dequeue(&priv->rx_recycle);
|
|
if (!skb)
|
|
skb = gfar_alloc_skb(dev);
|
|
|
|
return skb;
|
|
}
|
|
|
|
static inline void count_errors(unsigned short status, struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct gfar_extra_stats *estats = &priv->extra_stats;
|
|
|
|
/* If the packet was truncated, none of the other errors
|
|
* matter */
|
|
if (status & RXBD_TRUNCATED) {
|
|
stats->rx_length_errors++;
|
|
|
|
estats->rx_trunc++;
|
|
|
|
return;
|
|
}
|
|
/* Count the errors, if there were any */
|
|
if (status & (RXBD_LARGE | RXBD_SHORT)) {
|
|
stats->rx_length_errors++;
|
|
|
|
if (status & RXBD_LARGE)
|
|
estats->rx_large++;
|
|
else
|
|
estats->rx_short++;
|
|
}
|
|
if (status & RXBD_NONOCTET) {
|
|
stats->rx_frame_errors++;
|
|
estats->rx_nonoctet++;
|
|
}
|
|
if (status & RXBD_CRCERR) {
|
|
estats->rx_crcerr++;
|
|
stats->rx_crc_errors++;
|
|
}
|
|
if (status & RXBD_OVERRUN) {
|
|
estats->rx_overrun++;
|
|
stats->rx_crc_errors++;
|
|
}
|
|
}
|
|
|
|
irqreturn_t gfar_receive(int irq, void *grp_id)
|
|
{
|
|
gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb)
|
|
{
|
|
/* If valid headers were found, and valid sums
|
|
* were verified, then we tell the kernel that no
|
|
* checksumming is necessary. Otherwise, it is */
|
|
if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU))
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
else
|
|
skb_checksum_none_assert(skb);
|
|
}
|
|
|
|
|
|
/* gfar_process_frame() -- handle one incoming packet if skb
|
|
* isn't NULL. */
|
|
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
|
|
int amount_pull)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct rxfcb *fcb = NULL;
|
|
|
|
int ret;
|
|
|
|
/* fcb is at the beginning if exists */
|
|
fcb = (struct rxfcb *)skb->data;
|
|
|
|
/* Remove the FCB from the skb */
|
|
/* Remove the padded bytes, if there are any */
|
|
if (amount_pull) {
|
|
skb_record_rx_queue(skb, fcb->rq);
|
|
skb_pull(skb, amount_pull);
|
|
}
|
|
|
|
/* Get receive timestamp from the skb */
|
|
if (priv->hwts_rx_en) {
|
|
struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb);
|
|
u64 *ns = (u64 *) skb->data;
|
|
memset(shhwtstamps, 0, sizeof(*shhwtstamps));
|
|
shhwtstamps->hwtstamp = ns_to_ktime(*ns);
|
|
}
|
|
|
|
if (priv->padding)
|
|
skb_pull(skb, priv->padding);
|
|
|
|
if (priv->rx_csum_enable)
|
|
gfar_rx_checksum(skb, fcb);
|
|
|
|
/* Tell the skb what kind of packet this is */
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
/* Send the packet up the stack */
|
|
if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN)))
|
|
ret = vlan_hwaccel_receive_skb(skb, priv->vlgrp, fcb->vlctl);
|
|
else
|
|
ret = netif_receive_skb(skb);
|
|
|
|
if (NET_RX_DROP == ret)
|
|
priv->extra_stats.kernel_dropped++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* gfar_clean_rx_ring() -- Processes each frame in the rx ring
|
|
* until the budget/quota has been reached. Returns the number
|
|
* of frames handled
|
|
*/
|
|
int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
|
|
{
|
|
struct net_device *dev = rx_queue->dev;
|
|
struct rxbd8 *bdp, *base;
|
|
struct sk_buff *skb;
|
|
int pkt_len;
|
|
int amount_pull;
|
|
int howmany = 0;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
|
|
/* Get the first full descriptor */
|
|
bdp = rx_queue->cur_rx;
|
|
base = rx_queue->rx_bd_base;
|
|
|
|
amount_pull = (gfar_uses_fcb(priv) ? GMAC_FCB_LEN : 0);
|
|
|
|
while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) {
|
|
struct sk_buff *newskb;
|
|
rmb();
|
|
|
|
/* Add another skb for the future */
|
|
newskb = gfar_new_skb(dev);
|
|
|
|
skb = rx_queue->rx_skbuff[rx_queue->skb_currx];
|
|
|
|
dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr,
|
|
priv->rx_buffer_size, DMA_FROM_DEVICE);
|
|
|
|
if (unlikely(!(bdp->status & RXBD_ERR) &&
|
|
bdp->length > priv->rx_buffer_size))
|
|
bdp->status = RXBD_LARGE;
|
|
|
|
/* We drop the frame if we failed to allocate a new buffer */
|
|
if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
|
|
bdp->status & RXBD_ERR)) {
|
|
count_errors(bdp->status, dev);
|
|
|
|
if (unlikely(!newskb))
|
|
newskb = skb;
|
|
else if (skb)
|
|
__skb_queue_head(&priv->rx_recycle, skb);
|
|
} else {
|
|
/* Increment the number of packets */
|
|
rx_queue->stats.rx_packets++;
|
|
howmany++;
|
|
|
|
if (likely(skb)) {
|
|
pkt_len = bdp->length - ETH_FCS_LEN;
|
|
/* Remove the FCS from the packet length */
|
|
skb_put(skb, pkt_len);
|
|
rx_queue->stats.rx_bytes += pkt_len;
|
|
skb_record_rx_queue(skb, rx_queue->qindex);
|
|
gfar_process_frame(dev, skb, amount_pull);
|
|
|
|
} else {
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_WARNING
|
|
"%s: Missing skb!\n", dev->name);
|
|
rx_queue->stats.rx_dropped++;
|
|
priv->extra_stats.rx_skbmissing++;
|
|
}
|
|
|
|
}
|
|
|
|
rx_queue->rx_skbuff[rx_queue->skb_currx] = newskb;
|
|
|
|
/* Setup the new bdp */
|
|
gfar_new_rxbdp(rx_queue, bdp, newskb);
|
|
|
|
/* Update to the next pointer */
|
|
bdp = next_bd(bdp, base, rx_queue->rx_ring_size);
|
|
|
|
/* update to point at the next skb */
|
|
rx_queue->skb_currx =
|
|
(rx_queue->skb_currx + 1) &
|
|
RX_RING_MOD_MASK(rx_queue->rx_ring_size);
|
|
}
|
|
|
|
/* Update the current rxbd pointer to be the next one */
|
|
rx_queue->cur_rx = bdp;
|
|
|
|
return howmany;
|
|
}
|
|
|
|
static int gfar_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct gfar_priv_grp *gfargrp = container_of(napi,
|
|
struct gfar_priv_grp, napi);
|
|
struct gfar_private *priv = gfargrp->priv;
|
|
struct gfar __iomem *regs = gfargrp->regs;
|
|
struct gfar_priv_tx_q *tx_queue = NULL;
|
|
struct gfar_priv_rx_q *rx_queue = NULL;
|
|
int rx_cleaned = 0, budget_per_queue = 0, rx_cleaned_per_queue = 0;
|
|
int tx_cleaned = 0, i, left_over_budget = budget;
|
|
unsigned long serviced_queues = 0;
|
|
int num_queues = 0;
|
|
|
|
num_queues = gfargrp->num_rx_queues;
|
|
budget_per_queue = budget/num_queues;
|
|
|
|
/* Clear IEVENT, so interrupts aren't called again
|
|
* because of the packets that have already arrived */
|
|
gfar_write(®s->ievent, IEVENT_RTX_MASK);
|
|
|
|
while (num_queues && left_over_budget) {
|
|
|
|
budget_per_queue = left_over_budget/num_queues;
|
|
left_over_budget = 0;
|
|
|
|
for_each_set_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
|
|
if (test_bit(i, &serviced_queues))
|
|
continue;
|
|
rx_queue = priv->rx_queue[i];
|
|
tx_queue = priv->tx_queue[rx_queue->qindex];
|
|
|
|
tx_cleaned += gfar_clean_tx_ring(tx_queue);
|
|
rx_cleaned_per_queue = gfar_clean_rx_ring(rx_queue,
|
|
budget_per_queue);
|
|
rx_cleaned += rx_cleaned_per_queue;
|
|
if(rx_cleaned_per_queue < budget_per_queue) {
|
|
left_over_budget = left_over_budget +
|
|
(budget_per_queue - rx_cleaned_per_queue);
|
|
set_bit(i, &serviced_queues);
|
|
num_queues--;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (tx_cleaned)
|
|
return budget;
|
|
|
|
if (rx_cleaned < budget) {
|
|
napi_complete(napi);
|
|
|
|
/* Clear the halt bit in RSTAT */
|
|
gfar_write(®s->rstat, gfargrp->rstat);
|
|
|
|
gfar_write(®s->imask, IMASK_DEFAULT);
|
|
|
|
/* If we are coalescing interrupts, update the timer */
|
|
/* Otherwise, clear it */
|
|
gfar_configure_coalescing(priv,
|
|
gfargrp->rx_bit_map, gfargrp->tx_bit_map);
|
|
}
|
|
|
|
return rx_cleaned;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/*
|
|
* Polling 'interrupt' - used by things like netconsole to send skbs
|
|
* without having to re-enable interrupts. It's not called while
|
|
* the interrupt routine is executing.
|
|
*/
|
|
static void gfar_netpoll(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
int i = 0;
|
|
|
|
/* If the device has multiple interrupts, run tx/rx */
|
|
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
disable_irq(priv->gfargrp[i].interruptTransmit);
|
|
disable_irq(priv->gfargrp[i].interruptReceive);
|
|
disable_irq(priv->gfargrp[i].interruptError);
|
|
gfar_interrupt(priv->gfargrp[i].interruptTransmit,
|
|
&priv->gfargrp[i]);
|
|
enable_irq(priv->gfargrp[i].interruptError);
|
|
enable_irq(priv->gfargrp[i].interruptReceive);
|
|
enable_irq(priv->gfargrp[i].interruptTransmit);
|
|
}
|
|
} else {
|
|
for (i = 0; i < priv->num_grps; i++) {
|
|
disable_irq(priv->gfargrp[i].interruptTransmit);
|
|
gfar_interrupt(priv->gfargrp[i].interruptTransmit,
|
|
&priv->gfargrp[i]);
|
|
enable_irq(priv->gfargrp[i].interruptTransmit);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* The interrupt handler for devices with one interrupt */
|
|
static irqreturn_t gfar_interrupt(int irq, void *grp_id)
|
|
{
|
|
struct gfar_priv_grp *gfargrp = grp_id;
|
|
|
|
/* Save ievent for future reference */
|
|
u32 events = gfar_read(&gfargrp->regs->ievent);
|
|
|
|
/* Check for reception */
|
|
if (events & IEVENT_RX_MASK)
|
|
gfar_receive(irq, grp_id);
|
|
|
|
/* Check for transmit completion */
|
|
if (events & IEVENT_TX_MASK)
|
|
gfar_transmit(irq, grp_id);
|
|
|
|
/* Check for errors */
|
|
if (events & IEVENT_ERR_MASK)
|
|
gfar_error(irq, grp_id);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Called every time the controller might need to be made
|
|
* aware of new link state. The PHY code conveys this
|
|
* information through variables in the phydev structure, and this
|
|
* function converts those variables into the appropriate
|
|
* register values, and can bring down the device if needed.
|
|
*/
|
|
static void adjust_link(struct net_device *dev)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
unsigned long flags;
|
|
struct phy_device *phydev = priv->phydev;
|
|
int new_state = 0;
|
|
|
|
local_irq_save(flags);
|
|
lock_tx_qs(priv);
|
|
|
|
if (phydev->link) {
|
|
u32 tempval = gfar_read(®s->maccfg2);
|
|
u32 ecntrl = gfar_read(®s->ecntrl);
|
|
|
|
/* Now we make sure that we can be in full duplex mode.
|
|
* If not, we operate in half-duplex mode. */
|
|
if (phydev->duplex != priv->oldduplex) {
|
|
new_state = 1;
|
|
if (!(phydev->duplex))
|
|
tempval &= ~(MACCFG2_FULL_DUPLEX);
|
|
else
|
|
tempval |= MACCFG2_FULL_DUPLEX;
|
|
|
|
priv->oldduplex = phydev->duplex;
|
|
}
|
|
|
|
if (phydev->speed != priv->oldspeed) {
|
|
new_state = 1;
|
|
switch (phydev->speed) {
|
|
case 1000:
|
|
tempval =
|
|
((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
|
|
|
|
ecntrl &= ~(ECNTRL_R100);
|
|
break;
|
|
case 100:
|
|
case 10:
|
|
tempval =
|
|
((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
|
|
|
|
/* Reduced mode distinguishes
|
|
* between 10 and 100 */
|
|
if (phydev->speed == SPEED_100)
|
|
ecntrl |= ECNTRL_R100;
|
|
else
|
|
ecntrl &= ~(ECNTRL_R100);
|
|
break;
|
|
default:
|
|
if (netif_msg_link(priv))
|
|
printk(KERN_WARNING
|
|
"%s: Ack! Speed (%d) is not 10/100/1000!\n",
|
|
dev->name, phydev->speed);
|
|
break;
|
|
}
|
|
|
|
priv->oldspeed = phydev->speed;
|
|
}
|
|
|
|
gfar_write(®s->maccfg2, tempval);
|
|
gfar_write(®s->ecntrl, ecntrl);
|
|
|
|
if (!priv->oldlink) {
|
|
new_state = 1;
|
|
priv->oldlink = 1;
|
|
}
|
|
} else if (priv->oldlink) {
|
|
new_state = 1;
|
|
priv->oldlink = 0;
|
|
priv->oldspeed = 0;
|
|
priv->oldduplex = -1;
|
|
}
|
|
|
|
if (new_state && netif_msg_link(priv))
|
|
phy_print_status(phydev);
|
|
unlock_tx_qs(priv);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/* Update the hash table based on the current list of multicast
|
|
* addresses we subscribe to. Also, change the promiscuity of
|
|
* the device based on the flags (this function is called
|
|
* whenever dev->flags is changed */
|
|
static void gfar_set_multi(struct net_device *dev)
|
|
{
|
|
struct netdev_hw_addr *ha;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
u32 tempval;
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
/* Set RCTRL to PROM */
|
|
tempval = gfar_read(®s->rctrl);
|
|
tempval |= RCTRL_PROM;
|
|
gfar_write(®s->rctrl, tempval);
|
|
} else {
|
|
/* Set RCTRL to not PROM */
|
|
tempval = gfar_read(®s->rctrl);
|
|
tempval &= ~(RCTRL_PROM);
|
|
gfar_write(®s->rctrl, tempval);
|
|
}
|
|
|
|
if (dev->flags & IFF_ALLMULTI) {
|
|
/* Set the hash to rx all multicast frames */
|
|
gfar_write(®s->igaddr0, 0xffffffff);
|
|
gfar_write(®s->igaddr1, 0xffffffff);
|
|
gfar_write(®s->igaddr2, 0xffffffff);
|
|
gfar_write(®s->igaddr3, 0xffffffff);
|
|
gfar_write(®s->igaddr4, 0xffffffff);
|
|
gfar_write(®s->igaddr5, 0xffffffff);
|
|
gfar_write(®s->igaddr6, 0xffffffff);
|
|
gfar_write(®s->igaddr7, 0xffffffff);
|
|
gfar_write(®s->gaddr0, 0xffffffff);
|
|
gfar_write(®s->gaddr1, 0xffffffff);
|
|
gfar_write(®s->gaddr2, 0xffffffff);
|
|
gfar_write(®s->gaddr3, 0xffffffff);
|
|
gfar_write(®s->gaddr4, 0xffffffff);
|
|
gfar_write(®s->gaddr5, 0xffffffff);
|
|
gfar_write(®s->gaddr6, 0xffffffff);
|
|
gfar_write(®s->gaddr7, 0xffffffff);
|
|
} else {
|
|
int em_num;
|
|
int idx;
|
|
|
|
/* zero out the hash */
|
|
gfar_write(®s->igaddr0, 0x0);
|
|
gfar_write(®s->igaddr1, 0x0);
|
|
gfar_write(®s->igaddr2, 0x0);
|
|
gfar_write(®s->igaddr3, 0x0);
|
|
gfar_write(®s->igaddr4, 0x0);
|
|
gfar_write(®s->igaddr5, 0x0);
|
|
gfar_write(®s->igaddr6, 0x0);
|
|
gfar_write(®s->igaddr7, 0x0);
|
|
gfar_write(®s->gaddr0, 0x0);
|
|
gfar_write(®s->gaddr1, 0x0);
|
|
gfar_write(®s->gaddr2, 0x0);
|
|
gfar_write(®s->gaddr3, 0x0);
|
|
gfar_write(®s->gaddr4, 0x0);
|
|
gfar_write(®s->gaddr5, 0x0);
|
|
gfar_write(®s->gaddr6, 0x0);
|
|
gfar_write(®s->gaddr7, 0x0);
|
|
|
|
/* If we have extended hash tables, we need to
|
|
* clear the exact match registers to prepare for
|
|
* setting them */
|
|
if (priv->extended_hash) {
|
|
em_num = GFAR_EM_NUM + 1;
|
|
gfar_clear_exact_match(dev);
|
|
idx = 1;
|
|
} else {
|
|
idx = 0;
|
|
em_num = 0;
|
|
}
|
|
|
|
if (netdev_mc_empty(dev))
|
|
return;
|
|
|
|
/* Parse the list, and set the appropriate bits */
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
if (idx < em_num) {
|
|
gfar_set_mac_for_addr(dev, idx, ha->addr);
|
|
idx++;
|
|
} else
|
|
gfar_set_hash_for_addr(dev, ha->addr);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* Clears each of the exact match registers to zero, so they
|
|
* don't interfere with normal reception */
|
|
static void gfar_clear_exact_match(struct net_device *dev)
|
|
{
|
|
int idx;
|
|
u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0};
|
|
|
|
for(idx = 1;idx < GFAR_EM_NUM + 1;idx++)
|
|
gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr);
|
|
}
|
|
|
|
/* Set the appropriate hash bit for the given addr */
|
|
/* The algorithm works like so:
|
|
* 1) Take the Destination Address (ie the multicast address), and
|
|
* do a CRC on it (little endian), and reverse the bits of the
|
|
* result.
|
|
* 2) Use the 8 most significant bits as a hash into a 256-entry
|
|
* table. The table is controlled through 8 32-bit registers:
|
|
* gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is
|
|
* gaddr7. This means that the 3 most significant bits in the
|
|
* hash index which gaddr register to use, and the 5 other bits
|
|
* indicate which bit (assuming an IBM numbering scheme, which
|
|
* for PowerPC (tm) is usually the case) in the register holds
|
|
* the entry. */
|
|
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr)
|
|
{
|
|
u32 tempval;
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
u32 result = ether_crc(MAC_ADDR_LEN, addr);
|
|
int width = priv->hash_width;
|
|
u8 whichbit = (result >> (32 - width)) & 0x1f;
|
|
u8 whichreg = result >> (32 - width + 5);
|
|
u32 value = (1 << (31-whichbit));
|
|
|
|
tempval = gfar_read(priv->hash_regs[whichreg]);
|
|
tempval |= value;
|
|
gfar_write(priv->hash_regs[whichreg], tempval);
|
|
}
|
|
|
|
|
|
/* There are multiple MAC Address register pairs on some controllers
|
|
* This function sets the numth pair to a given address
|
|
*/
|
|
static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
|
|
{
|
|
struct gfar_private *priv = netdev_priv(dev);
|
|
struct gfar __iomem *regs = priv->gfargrp[0].regs;
|
|
int idx;
|
|
char tmpbuf[MAC_ADDR_LEN];
|
|
u32 tempval;
|
|
u32 __iomem *macptr = ®s->macstnaddr1;
|
|
|
|
macptr += num*2;
|
|
|
|
/* Now copy it into the mac registers backwards, cuz */
|
|
/* little endian is silly */
|
|
for (idx = 0; idx < MAC_ADDR_LEN; idx++)
|
|
tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx];
|
|
|
|
gfar_write(macptr, *((u32 *) (tmpbuf)));
|
|
|
|
tempval = *((u32 *) (tmpbuf + 4));
|
|
|
|
gfar_write(macptr+1, tempval);
|
|
}
|
|
|
|
/* GFAR error interrupt handler */
|
|
static irqreturn_t gfar_error(int irq, void *grp_id)
|
|
{
|
|
struct gfar_priv_grp *gfargrp = grp_id;
|
|
struct gfar __iomem *regs = gfargrp->regs;
|
|
struct gfar_private *priv= gfargrp->priv;
|
|
struct net_device *dev = priv->ndev;
|
|
|
|
/* Save ievent for future reference */
|
|
u32 events = gfar_read(®s->ievent);
|
|
|
|
/* Clear IEVENT */
|
|
gfar_write(®s->ievent, events & IEVENT_ERR_MASK);
|
|
|
|
/* Magic Packet is not an error. */
|
|
if ((priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
|
|
(events & IEVENT_MAG))
|
|
events &= ~IEVENT_MAG;
|
|
|
|
/* Hmm... */
|
|
if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
|
|
printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
|
|
dev->name, events, gfar_read(®s->imask));
|
|
|
|
/* Update the error counters */
|
|
if (events & IEVENT_TXE) {
|
|
dev->stats.tx_errors++;
|
|
|
|
if (events & IEVENT_LC)
|
|
dev->stats.tx_window_errors++;
|
|
if (events & IEVENT_CRL)
|
|
dev->stats.tx_aborted_errors++;
|
|
if (events & IEVENT_XFUN) {
|
|
unsigned long flags;
|
|
|
|
if (netif_msg_tx_err(priv))
|
|
printk(KERN_DEBUG "%s: TX FIFO underrun, "
|
|
"packet dropped.\n", dev->name);
|
|
dev->stats.tx_dropped++;
|
|
priv->extra_stats.tx_underrun++;
|
|
|
|
local_irq_save(flags);
|
|
lock_tx_qs(priv);
|
|
|
|
/* Reactivate the Tx Queues */
|
|
gfar_write(®s->tstat, gfargrp->tstat);
|
|
|
|
unlock_tx_qs(priv);
|
|
local_irq_restore(flags);
|
|
}
|
|
if (netif_msg_tx_err(priv))
|
|
printk(KERN_DEBUG "%s: Transmit Error\n", dev->name);
|
|
}
|
|
if (events & IEVENT_BSY) {
|
|
dev->stats.rx_errors++;
|
|
priv->extra_stats.rx_bsy++;
|
|
|
|
gfar_receive(irq, grp_id);
|
|
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_DEBUG "%s: busy error (rstat: %x)\n",
|
|
dev->name, gfar_read(®s->rstat));
|
|
}
|
|
if (events & IEVENT_BABR) {
|
|
dev->stats.rx_errors++;
|
|
priv->extra_stats.rx_babr++;
|
|
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_DEBUG "%s: babbling RX error\n", dev->name);
|
|
}
|
|
if (events & IEVENT_EBERR) {
|
|
priv->extra_stats.eberr++;
|
|
if (netif_msg_rx_err(priv))
|
|
printk(KERN_DEBUG "%s: bus error\n", dev->name);
|
|
}
|
|
if ((events & IEVENT_RXC) && netif_msg_rx_status(priv))
|
|
printk(KERN_DEBUG "%s: control frame\n", dev->name);
|
|
|
|
if (events & IEVENT_BABT) {
|
|
priv->extra_stats.tx_babt++;
|
|
if (netif_msg_tx_err(priv))
|
|
printk(KERN_DEBUG "%s: babbling TX error\n", dev->name);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct of_device_id gfar_match[] =
|
|
{
|
|
{
|
|
.type = "network",
|
|
.compatible = "gianfar",
|
|
},
|
|
{
|
|
.compatible = "fsl,etsec2",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gfar_match);
|
|
|
|
/* Structure for a device driver */
|
|
static struct of_platform_driver gfar_driver = {
|
|
.driver = {
|
|
.name = "fsl-gianfar",
|
|
.owner = THIS_MODULE,
|
|
.pm = GFAR_PM_OPS,
|
|
.of_match_table = gfar_match,
|
|
},
|
|
.probe = gfar_probe,
|
|
.remove = gfar_remove,
|
|
};
|
|
|
|
static int __init gfar_init(void)
|
|
{
|
|
return of_register_platform_driver(&gfar_driver);
|
|
}
|
|
|
|
static void __exit gfar_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&gfar_driver);
|
|
}
|
|
|
|
module_init(gfar_init);
|
|
module_exit(gfar_exit);
|
|
|