mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 20:51:44 +00:00
358e526a16
Commit1e8fed873e("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER") removed the limits on the possible values for ARCH_FORCE_MAX_ORDER. However removing the ranges entirely causes some common work flows to break. For example building a defconfig (which uses 64K pages), changing the page size to 4K, and rebuilding used to work, because ARCH_FORCE_MAX_ORDER would be clamped to 12 by the ranges. With the ranges removed it creates a kernel that builds but crashes at boot: kernel BUG at mm/huge_memory.c:470! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP hugepage_init+0x9c/0x278 LR do_one_initcall+0x80/0x320 Call Trace: do_one_initcall+0x80/0x320 kernel_init_freeable+0x304/0x3ac kernel_init+0x30/0x1a0 ret_from_kernel_user_thread+0x14/0x1c The reasoning for removing the ranges was that some of the values were too large. So take that into account and limit the maximums to 10 which is the default max, except for the 4K case which uses 12. Fixes:1e8fed873e("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230519113806.370635-1-mpe@ellerman.id.au
1323 lines
40 KiB
Plaintext
1323 lines
40 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0
|
|
source "arch/powerpc/platforms/Kconfig.cputype"
|
|
|
|
config CC_HAS_ELFV2
|
|
def_bool PPC64 && $(cc-option, -mabi=elfv2)
|
|
|
|
config CC_HAS_PREFIXED
|
|
def_bool PPC64 && $(cc-option, -mcpu=power10 -mprefixed)
|
|
|
|
config CC_HAS_PCREL
|
|
# Clang has a bug (https://github.com/llvm/llvm-project/issues/62372)
|
|
# where pcrel code is not generated if -msoft-float, -mno-altivec, or
|
|
# -mno-vsx options are also given. Without these options, fp/vec
|
|
# instructions are generated from regular kernel code. So Clang can't
|
|
# do pcrel yet.
|
|
def_bool PPC64 && CC_IS_GCC && $(cc-option, -mcpu=power10 -mpcrel)
|
|
|
|
config 32BIT
|
|
bool
|
|
default y if PPC32
|
|
|
|
config 64BIT
|
|
bool
|
|
default y if PPC64
|
|
|
|
config LIVEPATCH_64
|
|
def_bool PPC64
|
|
depends on LIVEPATCH
|
|
|
|
config MMU
|
|
bool
|
|
default y
|
|
|
|
config ARCH_MMAP_RND_BITS_MAX
|
|
# On Book3S 64, the default virtual address space for 64-bit processes
|
|
# is 2^47 (128TB). As a maximum, allow randomisation to consume up to
|
|
# 32T of address space (2^45), which should ensure a reasonable gap
|
|
# between bottom-up and top-down allocations for applications that
|
|
# consume "normal" amounts of address space. Book3S 64 only supports 64K
|
|
# and 4K page sizes.
|
|
default 29 if PPC_BOOK3S_64 && PPC_64K_PAGES # 29 = 45 (32T) - 16 (64K)
|
|
default 33 if PPC_BOOK3S_64 # 33 = 45 (32T) - 12 (4K)
|
|
#
|
|
# On all other 64-bit platforms (currently only Book3E), the virtual
|
|
# address space is 2^46 (64TB). Allow randomisation to consume up to 16T
|
|
# of address space (2^44). Only 4K page sizes are supported.
|
|
default 32 if 64BIT # 32 = 44 (16T) - 12 (4K)
|
|
#
|
|
# For 32-bit, use the compat values, as they're the same.
|
|
default ARCH_MMAP_RND_COMPAT_BITS_MAX
|
|
|
|
config ARCH_MMAP_RND_BITS_MIN
|
|
# Allow randomisation to consume up to 1GB of address space (2^30).
|
|
default 14 if 64BIT && PPC_64K_PAGES # 14 = 30 (1GB) - 16 (64K)
|
|
default 18 if 64BIT # 18 = 30 (1GB) - 12 (4K)
|
|
#
|
|
# For 32-bit, use the compat values, as they're the same.
|
|
default ARCH_MMAP_RND_COMPAT_BITS_MIN
|
|
|
|
config ARCH_MMAP_RND_COMPAT_BITS_MAX
|
|
# Total virtual address space for 32-bit processes is 2^31 (2GB).
|
|
# Allow randomisation to consume up to 512MB of address space (2^29).
|
|
default 11 if PPC_256K_PAGES # 11 = 29 (512MB) - 18 (256K)
|
|
default 13 if PPC_64K_PAGES # 13 = 29 (512MB) - 16 (64K)
|
|
default 15 if PPC_16K_PAGES # 15 = 29 (512MB) - 14 (16K)
|
|
default 17 # 17 = 29 (512MB) - 12 (4K)
|
|
|
|
config ARCH_MMAP_RND_COMPAT_BITS_MIN
|
|
# Total virtual address space for 32-bit processes is 2^31 (2GB).
|
|
# Allow randomisation to consume up to 8MB of address space (2^23).
|
|
default 5 if PPC_256K_PAGES # 5 = 23 (8MB) - 18 (256K)
|
|
default 7 if PPC_64K_PAGES # 7 = 23 (8MB) - 16 (64K)
|
|
default 9 if PPC_16K_PAGES # 9 = 23 (8MB) - 14 (16K)
|
|
default 11 # 11 = 23 (8MB) - 12 (4K)
|
|
|
|
config NR_IRQS
|
|
int "Number of virtual interrupt numbers"
|
|
range 32 1048576
|
|
default "512"
|
|
help
|
|
This defines the number of virtual interrupt numbers the kernel
|
|
can manage. Virtual interrupt numbers are what you see in
|
|
/proc/interrupts. If you configure your system to have too few,
|
|
drivers will fail to load or worse - handle with care.
|
|
|
|
config NMI_IPI
|
|
bool
|
|
depends on SMP && (DEBUGGER || KEXEC_CORE || HARDLOCKUP_DETECTOR)
|
|
default y
|
|
|
|
config PPC_WATCHDOG
|
|
bool
|
|
depends on HARDLOCKUP_DETECTOR
|
|
depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
|
|
default y
|
|
help
|
|
This is a placeholder when the powerpc hardlockup detector
|
|
watchdog is selected (arch/powerpc/kernel/watchdog.c). It is
|
|
selected via the generic lockup detector menu which is why we
|
|
have no standalone config option for it here.
|
|
|
|
config STACKTRACE_SUPPORT
|
|
bool
|
|
default y
|
|
|
|
config LOCKDEP_SUPPORT
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_LOCKBREAK
|
|
bool
|
|
default y
|
|
depends on SMP && PREEMPTION && !PPC_QUEUED_SPINLOCKS
|
|
|
|
config GENERIC_HWEIGHT
|
|
bool
|
|
default y
|
|
|
|
config PPC
|
|
bool
|
|
default y
|
|
#
|
|
# Please keep this list sorted alphabetically.
|
|
#
|
|
select ARCH_32BIT_OFF_T if PPC32
|
|
select ARCH_DISABLE_KASAN_INLINE if PPC_RADIX_MMU
|
|
select ARCH_DMA_DEFAULT_COHERENT if !NOT_COHERENT_CACHE
|
|
select ARCH_ENABLE_MEMORY_HOTPLUG
|
|
select ARCH_ENABLE_MEMORY_HOTREMOVE
|
|
select ARCH_HAS_COPY_MC if PPC64
|
|
select ARCH_HAS_CURRENT_STACK_POINTER
|
|
select ARCH_HAS_DEBUG_VIRTUAL
|
|
select ARCH_HAS_DEBUG_VM_PGTABLE
|
|
select ARCH_HAS_DEBUG_WX if STRICT_KERNEL_RWX
|
|
select ARCH_HAS_DEVMEM_IS_ALLOWED
|
|
select ARCH_HAS_DMA_MAP_DIRECT if PPC_PSERIES
|
|
select ARCH_HAS_FORTIFY_SOURCE
|
|
select ARCH_HAS_GCOV_PROFILE_ALL
|
|
select ARCH_HAS_HUGEPD if HUGETLB_PAGE
|
|
select ARCH_HAS_KCOV
|
|
select ARCH_HAS_MEMBARRIER_CALLBACKS
|
|
select ARCH_HAS_MEMBARRIER_SYNC_CORE
|
|
select ARCH_HAS_MEMREMAP_COMPAT_ALIGN if PPC_64S_HASH_MMU
|
|
select ARCH_HAS_MMIOWB if PPC64
|
|
select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
|
|
select ARCH_HAS_PHYS_TO_DMA
|
|
select ARCH_HAS_PMEM_API
|
|
select ARCH_HAS_PTE_DEVMAP if PPC_BOOK3S_64
|
|
select ARCH_HAS_PTE_SPECIAL
|
|
select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
|
|
select ARCH_HAS_SET_MEMORY
|
|
select ARCH_HAS_STRICT_KERNEL_RWX if (PPC_BOOK3S || PPC_8xx || 40x) && !HIBERNATION
|
|
select ARCH_HAS_STRICT_KERNEL_RWX if PPC_85xx && !HIBERNATION && !RANDOMIZE_BASE
|
|
select ARCH_HAS_STRICT_MODULE_RWX if ARCH_HAS_STRICT_KERNEL_RWX
|
|
select ARCH_HAS_SYSCALL_WRAPPER if !SPU_BASE && !COMPAT
|
|
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
|
|
select ARCH_HAS_UACCESS_FLUSHCACHE
|
|
select ARCH_HAS_UBSAN_SANITIZE_ALL
|
|
select ARCH_HAVE_NMI_SAFE_CMPXCHG
|
|
select ARCH_KEEP_MEMBLOCK
|
|
select ARCH_MIGHT_HAVE_PC_PARPORT
|
|
select ARCH_MIGHT_HAVE_PC_SERIO
|
|
select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
|
|
select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
|
|
select ARCH_SPLIT_ARG64 if PPC32
|
|
select ARCH_STACKWALK
|
|
select ARCH_SUPPORTS_ATOMIC_RMW
|
|
select ARCH_SUPPORTS_DEBUG_PAGEALLOC if PPC_BOOK3S || PPC_8xx || 40x
|
|
select ARCH_USE_BUILTIN_BSWAP
|
|
select ARCH_USE_CMPXCHG_LOCKREF if PPC64
|
|
select ARCH_USE_MEMTEST
|
|
select ARCH_USE_QUEUED_RWLOCKS if PPC_QUEUED_SPINLOCKS
|
|
select ARCH_WANT_DEFAULT_BPF_JIT
|
|
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
|
|
select ARCH_WANT_IPC_PARSE_VERSION
|
|
select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
|
|
select ARCH_WANT_LD_ORPHAN_WARN
|
|
select ARCH_WANTS_MODULES_DATA_IN_VMALLOC if PPC_BOOK3S_32 || PPC_8xx
|
|
select ARCH_WEAK_RELEASE_ACQUIRE
|
|
select BINFMT_ELF
|
|
select BUILDTIME_TABLE_SORT
|
|
select CLONE_BACKWARDS
|
|
select CPUMASK_OFFSTACK if NR_CPUS >= 8192
|
|
select DCACHE_WORD_ACCESS if PPC64 && CPU_LITTLE_ENDIAN
|
|
select DMA_OPS_BYPASS if PPC64
|
|
select DMA_OPS if PPC64
|
|
select DYNAMIC_FTRACE if FUNCTION_TRACER
|
|
select EDAC_ATOMIC_SCRUB
|
|
select EDAC_SUPPORT
|
|
select GENERIC_ATOMIC64 if PPC32
|
|
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
|
|
select GENERIC_CMOS_UPDATE
|
|
select GENERIC_CPU_AUTOPROBE
|
|
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
|
|
select GENERIC_EARLY_IOREMAP
|
|
select GENERIC_GETTIMEOFDAY
|
|
select GENERIC_IRQ_SHOW
|
|
select GENERIC_IRQ_SHOW_LEVEL
|
|
select GENERIC_PCI_IOMAP if PCI
|
|
select GENERIC_PTDUMP
|
|
select GENERIC_SMP_IDLE_THREAD
|
|
select GENERIC_TIME_VSYSCALL
|
|
select GENERIC_VDSO_TIME_NS
|
|
select HAS_IOPORT if PCI
|
|
select HAVE_ARCH_AUDITSYSCALL
|
|
select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP
|
|
select HAVE_ARCH_HUGE_VMAP if PPC_RADIX_MMU || PPC_8xx
|
|
select HAVE_ARCH_JUMP_LABEL
|
|
select HAVE_ARCH_JUMP_LABEL_RELATIVE
|
|
select HAVE_ARCH_KASAN if PPC32 && PPC_PAGE_SHIFT <= 14
|
|
select HAVE_ARCH_KASAN if PPC_RADIX_MMU
|
|
select HAVE_ARCH_KASAN if PPC_BOOK3E_64
|
|
select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
|
|
select HAVE_ARCH_KCSAN if PPC_BOOK3S_64
|
|
select HAVE_ARCH_KFENCE if ARCH_SUPPORTS_DEBUG_PAGEALLOC
|
|
select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
|
|
select HAVE_ARCH_WITHIN_STACK_FRAMES
|
|
select HAVE_ARCH_KGDB
|
|
select HAVE_ARCH_MMAP_RND_BITS
|
|
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
|
|
select HAVE_ARCH_NVRAM_OPS
|
|
select HAVE_ARCH_SECCOMP_FILTER
|
|
select HAVE_ARCH_TRACEHOOK
|
|
select HAVE_ASM_MODVERSIONS
|
|
select HAVE_CONTEXT_TRACKING_USER
|
|
select HAVE_C_RECORDMCOUNT
|
|
select HAVE_DEBUG_KMEMLEAK
|
|
select HAVE_DEBUG_STACKOVERFLOW
|
|
select HAVE_DYNAMIC_FTRACE
|
|
select HAVE_DYNAMIC_FTRACE_WITH_ARGS if MPROFILE_KERNEL || PPC32
|
|
select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL || PPC32
|
|
select HAVE_EBPF_JIT
|
|
select HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
select HAVE_FAST_GUP
|
|
select HAVE_FTRACE_MCOUNT_RECORD
|
|
select HAVE_FUNCTION_DESCRIPTORS if PPC64_ELF_ABI_V1
|
|
select HAVE_FUNCTION_ERROR_INJECTION
|
|
select HAVE_FUNCTION_GRAPH_TRACER
|
|
select HAVE_FUNCTION_TRACER
|
|
select HAVE_GCC_PLUGINS if GCC_VERSION >= 50200 # plugin support on gcc <= 5.1 is buggy on PPC
|
|
select HAVE_GENERIC_VDSO
|
|
select HAVE_HARDLOCKUP_DETECTOR_ARCH if PPC_BOOK3S_64 && SMP
|
|
select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
|
|
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
|
|
select HAVE_IOREMAP_PROT
|
|
select HAVE_IRQ_TIME_ACCOUNTING
|
|
select HAVE_KERNEL_GZIP
|
|
select HAVE_KERNEL_LZMA if DEFAULT_UIMAGE
|
|
select HAVE_KERNEL_LZO if DEFAULT_UIMAGE
|
|
select HAVE_KERNEL_XZ if PPC_BOOK3S || 44x
|
|
select HAVE_KPROBES
|
|
select HAVE_KPROBES_ON_FTRACE
|
|
select HAVE_KRETPROBES
|
|
select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if HAVE_OBJTOOL_MCOUNT
|
|
select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
|
|
select HAVE_MOD_ARCH_SPECIFIC
|
|
select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
|
|
select HAVE_OPTPROBES
|
|
select HAVE_OBJTOOL if PPC32 || MPROFILE_KERNEL
|
|
select HAVE_OBJTOOL_MCOUNT if HAVE_OBJTOOL
|
|
select HAVE_PERF_EVENTS
|
|
select HAVE_PERF_EVENTS_NMI if PPC64
|
|
select HAVE_PERF_REGS
|
|
select HAVE_PERF_USER_STACK_DUMP
|
|
select HAVE_REGS_AND_STACK_ACCESS_API
|
|
select HAVE_RELIABLE_STACKTRACE
|
|
select HAVE_RSEQ
|
|
select HAVE_SETUP_PER_CPU_AREA if PPC64
|
|
select HAVE_SOFTIRQ_ON_OWN_STACK
|
|
select HAVE_STACKPROTECTOR if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
|
|
select HAVE_STACKPROTECTOR if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
|
|
select HAVE_STATIC_CALL if PPC32
|
|
select HAVE_SYSCALL_TRACEPOINTS
|
|
select HAVE_VIRT_CPU_ACCOUNTING
|
|
select HAVE_VIRT_CPU_ACCOUNTING_GEN
|
|
select HUGETLB_PAGE_SIZE_VARIABLE if PPC_BOOK3S_64 && HUGETLB_PAGE
|
|
select IOMMU_HELPER if PPC64
|
|
select IRQ_DOMAIN
|
|
select IRQ_FORCED_THREADING
|
|
select KASAN_VMALLOC if KASAN && MODULES
|
|
select MMU_GATHER_PAGE_SIZE
|
|
select MMU_GATHER_RCU_TABLE_FREE
|
|
select MMU_GATHER_MERGE_VMAS
|
|
select MMU_LAZY_TLB_SHOOTDOWN if PPC_BOOK3S_64
|
|
select MODULES_USE_ELF_RELA
|
|
select NEED_DMA_MAP_STATE if PPC64 || NOT_COHERENT_CACHE
|
|
select NEED_PER_CPU_EMBED_FIRST_CHUNK if PPC64
|
|
select NEED_PER_CPU_PAGE_FIRST_CHUNK if PPC64
|
|
select NEED_SG_DMA_LENGTH
|
|
select OF
|
|
select OF_EARLY_FLATTREE
|
|
select OLD_SIGACTION if PPC32
|
|
select OLD_SIGSUSPEND
|
|
select PCI_DOMAINS if PCI
|
|
select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
|
|
select PCI_SYSCALL if PCI
|
|
select PPC_DAWR if PPC64
|
|
select RTC_LIB
|
|
select SPARSE_IRQ
|
|
select STRICT_KERNEL_RWX if STRICT_MODULE_RWX
|
|
select SYSCTL_EXCEPTION_TRACE
|
|
select THREAD_INFO_IN_TASK
|
|
select TRACE_IRQFLAGS_SUPPORT
|
|
#
|
|
# Please keep this list sorted alphabetically.
|
|
#
|
|
|
|
config PPC_BARRIER_NOSPEC
|
|
bool
|
|
default y
|
|
depends on PPC_BOOK3S_64 || PPC_E500
|
|
|
|
config PPC_HAS_LBARX_LHARX
|
|
bool
|
|
|
|
config EARLY_PRINTK
|
|
bool
|
|
default y
|
|
|
|
config PANIC_TIMEOUT
|
|
int
|
|
default 180
|
|
|
|
config COMPAT
|
|
bool "Enable support for 32bit binaries"
|
|
depends on PPC64
|
|
depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
|
|
default y if !CPU_LITTLE_ENDIAN
|
|
select ARCH_WANT_OLD_COMPAT_IPC
|
|
select COMPAT_OLD_SIGACTION
|
|
|
|
config SCHED_OMIT_FRAME_POINTER
|
|
bool
|
|
default y
|
|
|
|
config ARCH_MAY_HAVE_PC_FDC
|
|
bool
|
|
default PCI
|
|
|
|
config PPC_UDBG_16550
|
|
bool
|
|
|
|
config GENERIC_TBSYNC
|
|
bool
|
|
default y if PPC32 && SMP
|
|
|
|
config AUDIT_ARCH
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_BUG
|
|
bool
|
|
default y
|
|
depends on BUG
|
|
|
|
config GENERIC_BUG_RELATIVE_POINTERS
|
|
def_bool y
|
|
depends on GENERIC_BUG
|
|
|
|
config SYS_SUPPORTS_APM_EMULATION
|
|
default y if PMAC_APM_EMU
|
|
bool
|
|
|
|
config EPAPR_BOOT
|
|
bool
|
|
help
|
|
Used to allow a board to specify it wants an ePAPR compliant wrapper.
|
|
|
|
config DEFAULT_UIMAGE
|
|
bool
|
|
help
|
|
Used to allow a board to specify it wants a uImage built by default
|
|
|
|
config ARCH_HIBERNATION_POSSIBLE
|
|
bool
|
|
default y
|
|
|
|
config ARCH_SUSPEND_POSSIBLE
|
|
def_bool y
|
|
depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
|
|
(PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
|
|
|| 44x || 40x
|
|
|
|
config ARCH_SUSPEND_NONZERO_CPU
|
|
def_bool y
|
|
depends on PPC_POWERNV || PPC_PSERIES
|
|
|
|
config ARCH_HAS_ADD_PAGES
|
|
def_bool y
|
|
depends on ARCH_ENABLE_MEMORY_HOTPLUG
|
|
|
|
config PPC_DCR_NATIVE
|
|
bool
|
|
|
|
config PPC_DCR_MMIO
|
|
bool
|
|
|
|
config PPC_DCR
|
|
bool
|
|
depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
|
|
default y
|
|
|
|
config PPC_PCI_OF_BUS_MAP
|
|
bool "Use pci_to_OF_bus_map (deprecated)"
|
|
depends on PPC32
|
|
depends on PPC_PMAC || PPC_CHRP
|
|
help
|
|
This option uses pci_to_OF_bus_map to map OF nodes to PCI devices, which
|
|
restricts the system to only having 256 PCI buses. On CHRP it also causes
|
|
the "pci-OF-bus-map" property to be created in the device tree.
|
|
|
|
If unsure, say "N".
|
|
|
|
config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
|
|
depends on PPC32
|
|
depends on !PPC_PCI_OF_BUS_MAP
|
|
bool "Assign PCI bus numbers from zero individually for each PCI domain"
|
|
default y
|
|
help
|
|
By default on PPC32 were PCI bus numbers unique across all PCI domains.
|
|
So system could have only 256 PCI buses independently of available
|
|
PCI domains. When this option is enabled then PCI bus numbers are
|
|
PCI domain dependent and each PCI controller on own domain can have
|
|
256 PCI buses, like it is on other Linux architectures.
|
|
|
|
config PPC_OF_PLATFORM_PCI
|
|
bool
|
|
depends on PCI
|
|
depends on PPC64 # not supported on 32 bits yet
|
|
|
|
config ARCH_SUPPORTS_UPROBES
|
|
def_bool y
|
|
|
|
config PPC_ADV_DEBUG_REGS
|
|
bool
|
|
depends on 40x || BOOKE
|
|
default y
|
|
|
|
config PPC_ADV_DEBUG_IACS
|
|
int
|
|
depends on PPC_ADV_DEBUG_REGS
|
|
default 4 if 44x
|
|
default 2
|
|
|
|
config PPC_ADV_DEBUG_DACS
|
|
int
|
|
depends on PPC_ADV_DEBUG_REGS
|
|
default 2
|
|
|
|
config PPC_ADV_DEBUG_DVCS
|
|
int
|
|
depends on PPC_ADV_DEBUG_REGS
|
|
default 2 if 44x
|
|
default 0
|
|
|
|
config PPC_ADV_DEBUG_DAC_RANGE
|
|
bool
|
|
depends on PPC_ADV_DEBUG_REGS && 44x
|
|
default y
|
|
|
|
config PPC_DAWR
|
|
bool
|
|
|
|
config PGTABLE_LEVELS
|
|
int
|
|
default 2 if !PPC64
|
|
default 4
|
|
|
|
source "arch/powerpc/sysdev/Kconfig"
|
|
source "arch/powerpc/platforms/Kconfig"
|
|
|
|
menu "Kernel options"
|
|
|
|
config HIGHMEM
|
|
bool "High memory support"
|
|
depends on PPC32
|
|
select KMAP_LOCAL
|
|
|
|
source "kernel/Kconfig.hz"
|
|
|
|
config MATH_EMULATION
|
|
bool "Math emulation"
|
|
depends on 4xx || PPC_8xx || PPC_MPC832x || BOOKE || PPC_MICROWATT
|
|
select PPC_FPU_REGS
|
|
help
|
|
Some PowerPC chips designed for embedded applications do not have
|
|
a floating-point unit and therefore do not implement the
|
|
floating-point instructions in the PowerPC instruction set. If you
|
|
say Y here, the kernel will include code to emulate a floating-point
|
|
unit, which will allow programs that use floating-point
|
|
instructions to run.
|
|
|
|
This is also useful to emulate missing (optional) instructions
|
|
such as fsqrt on cores that do have an FPU but do not implement
|
|
them (such as Freescale BookE).
|
|
|
|
choice
|
|
prompt "Math emulation options"
|
|
default MATH_EMULATION_FULL
|
|
depends on MATH_EMULATION
|
|
|
|
config MATH_EMULATION_FULL
|
|
bool "Emulate all the floating point instructions"
|
|
help
|
|
Select this option will enable the kernel to support to emulate
|
|
all the floating point instructions. If your SoC doesn't have
|
|
a FPU, you should select this.
|
|
|
|
config MATH_EMULATION_HW_UNIMPLEMENTED
|
|
bool "Just emulate the FPU unimplemented instructions"
|
|
help
|
|
Select this if you know there does have a hardware FPU on your
|
|
SoC, but some floating point instructions are not implemented by that.
|
|
|
|
endchoice
|
|
|
|
config PPC_TRANSACTIONAL_MEM
|
|
bool "Transactional Memory support for POWERPC"
|
|
depends on PPC_BOOK3S_64
|
|
depends on SMP
|
|
select ALTIVEC
|
|
select VSX
|
|
help
|
|
Support user-mode Transactional Memory on POWERPC.
|
|
|
|
config PPC_UV
|
|
bool "Ultravisor support"
|
|
depends on KVM_BOOK3S_HV_POSSIBLE
|
|
depends on DEVICE_PRIVATE
|
|
default n
|
|
help
|
|
This option paravirtualizes the kernel to run in POWER platforms that
|
|
supports the Protected Execution Facility (PEF). On such platforms,
|
|
the ultravisor firmware runs at a privilege level above the
|
|
hypervisor.
|
|
|
|
If unsure, say "N".
|
|
|
|
config LD_HEAD_STUB_CATCH
|
|
bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
|
|
depends on PPC64
|
|
help
|
|
Very large kernels can cause linker branch stubs to be generated by
|
|
code in head_64.S, which moves the head text sections out of their
|
|
specified location. This option can work around the problem.
|
|
|
|
If unsure, say "N".
|
|
|
|
config MPROFILE_KERNEL
|
|
depends on PPC64 && CPU_LITTLE_ENDIAN && FUNCTION_TRACER
|
|
def_bool $(success,$(srctree)/arch/powerpc/tools/gcc-check-mprofile-kernel.sh $(CC) -I$(srctree)/include -D__KERNEL__)
|
|
|
|
config HOTPLUG_CPU
|
|
bool "Support for enabling/disabling CPUs"
|
|
depends on SMP && (PPC_PSERIES || \
|
|
PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
|
|
help
|
|
Say Y here to be able to disable and re-enable individual
|
|
CPUs at runtime on SMP machines.
|
|
|
|
Say N if you are unsure.
|
|
|
|
config INTERRUPT_SANITIZE_REGISTERS
|
|
bool "Clear gprs on interrupt arrival"
|
|
depends on PPC64 && ARCH_HAS_SYSCALL_WRAPPER
|
|
default PPC_BOOK3E_64 || PPC_PSERIES || PPC_POWERNV
|
|
help
|
|
Reduce the influence of user register state on interrupt handlers and
|
|
syscalls through clearing user state from registers before handling
|
|
the exception.
|
|
|
|
config PPC_QUEUED_SPINLOCKS
|
|
bool "Queued spinlocks" if EXPERT
|
|
depends on SMP
|
|
default PPC_BOOK3S_64
|
|
help
|
|
Say Y here to use queued spinlocks which give better scalability and
|
|
fairness on large SMP and NUMA systems without harming single threaded
|
|
performance.
|
|
|
|
config ARCH_CPU_PROBE_RELEASE
|
|
def_bool y
|
|
depends on HOTPLUG_CPU
|
|
|
|
config PPC64_SUPPORTS_MEMORY_FAILURE
|
|
bool "Add support for memory hwpoison"
|
|
depends on PPC_BOOK3S_64
|
|
default "y" if PPC_POWERNV
|
|
select ARCH_SUPPORTS_MEMORY_FAILURE
|
|
|
|
config KEXEC
|
|
bool "kexec system call"
|
|
depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP)
|
|
select KEXEC_CORE
|
|
help
|
|
kexec is a system call that implements the ability to shutdown your
|
|
current kernel, and to start another kernel. It is like a reboot
|
|
but it is independent of the system firmware. And like a reboot
|
|
you can start any kernel with it, not just Linux.
|
|
|
|
The name comes from the similarity to the exec system call.
|
|
|
|
It is an ongoing process to be certain the hardware in a machine
|
|
is properly shutdown, so do not be surprised if this code does not
|
|
initially work for you. As of this writing the exact hardware
|
|
interface is strongly in flux, so no good recommendation can be
|
|
made.
|
|
|
|
config KEXEC_FILE
|
|
bool "kexec file based system call"
|
|
select KEXEC_CORE
|
|
select HAVE_IMA_KEXEC if IMA
|
|
select KEXEC_ELF
|
|
depends on PPC64
|
|
depends on CRYPTO=y
|
|
depends on CRYPTO_SHA256=y
|
|
help
|
|
This is a new version of the kexec system call. This call is
|
|
file based and takes in file descriptors as system call arguments
|
|
for kernel and initramfs as opposed to a list of segments as is the
|
|
case for the older kexec call.
|
|
|
|
config ARCH_HAS_KEXEC_PURGATORY
|
|
def_bool KEXEC_FILE
|
|
|
|
config PPC64_BIG_ENDIAN_ELF_ABI_V2
|
|
bool "Build big-endian kernel using ELF ABI V2 (EXPERIMENTAL)"
|
|
depends on PPC64 && CPU_BIG_ENDIAN
|
|
depends on CC_HAS_ELFV2
|
|
depends on LD_VERSION >= 22400 || LLD_VERSION >= 150000
|
|
help
|
|
This builds the kernel image using the "Power Architecture 64-Bit ELF
|
|
V2 ABI Specification", which has a reduced stack overhead and faster
|
|
function calls. This internal kernel ABI option does not affect
|
|
userspace compatibility.
|
|
|
|
The V2 ABI is standard for 64-bit little-endian, but for big-endian
|
|
it is less well tested by kernel and toolchain. However some distros
|
|
build userspace this way, and it can produce a functioning kernel.
|
|
|
|
This requires GCC and binutils 2.24 or newer.
|
|
|
|
config RELOCATABLE
|
|
bool "Build a relocatable kernel"
|
|
depends on PPC64 || (FLATMEM && (44x || PPC_85xx))
|
|
select NONSTATIC_KERNEL
|
|
help
|
|
This builds a kernel image that is capable of running at the
|
|
location the kernel is loaded at. For ppc32, there is no any
|
|
alignment restrictions, and this feature is a superset of
|
|
DYNAMIC_MEMSTART and hence overrides it. For ppc64, we should use
|
|
16k-aligned base address. The kernel is linked as a
|
|
position-independent executable (PIE) and contains dynamic relocations
|
|
which are processed early in the bootup process.
|
|
|
|
One use is for the kexec on panic case where the recovery kernel
|
|
must live at a different physical address than the primary
|
|
kernel.
|
|
|
|
Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
|
|
it has been loaded at and the compile time physical addresses
|
|
CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
|
|
setting can still be useful to bootwrappers that need to know the
|
|
load address of the kernel (eg. u-boot/mkimage).
|
|
|
|
config RANDOMIZE_BASE
|
|
bool "Randomize the address of the kernel image"
|
|
depends on PPC_85xx && FLATMEM
|
|
depends on RELOCATABLE
|
|
help
|
|
Randomizes the virtual address at which the kernel image is
|
|
loaded, as a security feature that deters exploit attempts
|
|
relying on knowledge of the location of kernel internals.
|
|
|
|
If unsure, say Y.
|
|
|
|
config RELOCATABLE_TEST
|
|
bool "Test relocatable kernel"
|
|
depends on (PPC64 && RELOCATABLE)
|
|
help
|
|
This runs the relocatable kernel at the address it was initially
|
|
loaded at, which tends to be non-zero and therefore test the
|
|
relocation code.
|
|
|
|
config CRASH_DUMP
|
|
bool "Build a dump capture kernel"
|
|
depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
|
|
select RELOCATABLE if PPC64 || 44x || PPC_85xx
|
|
help
|
|
Build a kernel suitable for use as a dump capture kernel.
|
|
The same kernel binary can be used as production kernel and dump
|
|
capture kernel.
|
|
|
|
config FA_DUMP
|
|
bool "Firmware-assisted dump"
|
|
depends on PPC64 && (PPC_RTAS || PPC_POWERNV)
|
|
select CRASH_CORE
|
|
select CRASH_DUMP
|
|
help
|
|
A robust mechanism to get reliable kernel crash dump with
|
|
assistance from firmware. This approach does not use kexec,
|
|
instead firmware assists in booting the capture kernel
|
|
while preserving memory contents. Firmware-assisted dump
|
|
is meant to be a kdump replacement offering robustness and
|
|
speed not possible without system firmware assistance.
|
|
|
|
If unsure, say "y". Only special kernels like petitboot may
|
|
need to say "N" here.
|
|
|
|
config PRESERVE_FA_DUMP
|
|
bool "Preserve Firmware-assisted dump"
|
|
depends on PPC64 && PPC_POWERNV && !FA_DUMP
|
|
help
|
|
On a kernel with FA_DUMP disabled, this option helps to preserve
|
|
crash data from a previously crash'ed kernel. Useful when the next
|
|
memory preserving kernel boot would process this crash data.
|
|
Petitboot kernel is the typical usecase for this option.
|
|
|
|
config OPAL_CORE
|
|
bool "Export OPAL memory as /sys/firmware/opal/core"
|
|
depends on PPC64 && PPC_POWERNV
|
|
help
|
|
This option uses the MPIPL support in firmware to provide an
|
|
ELF core of OPAL memory after a crash. The ELF core is exported
|
|
as /sys/firmware/opal/core file which is helpful in debugging
|
|
OPAL crashes using GDB.
|
|
|
|
config IRQ_ALL_CPUS
|
|
bool "Distribute interrupts on all CPUs by default"
|
|
depends on SMP
|
|
help
|
|
This option gives the kernel permission to distribute IRQs across
|
|
multiple CPUs. Saying N here will route all IRQs to the first
|
|
CPU. Generally saying Y is safe, although some problems have been
|
|
reported with SMP Power Macintoshes with this option enabled.
|
|
|
|
config NUMA
|
|
bool "NUMA Memory Allocation and Scheduler Support"
|
|
depends on PPC64 && SMP
|
|
default y if PPC_PSERIES || PPC_POWERNV
|
|
select USE_PERCPU_NUMA_NODE_ID
|
|
help
|
|
Enable NUMA (Non-Uniform Memory Access) support.
|
|
|
|
The kernel will try to allocate memory used by a CPU on the
|
|
local memory controller of the CPU and add some more
|
|
NUMA awareness to the kernel.
|
|
|
|
config NODES_SHIFT
|
|
int
|
|
default "8" if PPC64
|
|
default "4"
|
|
depends on NUMA
|
|
|
|
config HAVE_MEMORYLESS_NODES
|
|
def_bool y
|
|
depends on NUMA
|
|
|
|
config ARCH_SELECT_MEMORY_MODEL
|
|
def_bool y
|
|
depends on PPC64
|
|
|
|
config ARCH_FLATMEM_ENABLE
|
|
def_bool y
|
|
depends on (PPC64 && !NUMA) || PPC32
|
|
|
|
config ARCH_SPARSEMEM_ENABLE
|
|
def_bool y
|
|
depends on PPC64
|
|
select SPARSEMEM_VMEMMAP_ENABLE
|
|
|
|
config ARCH_SPARSEMEM_DEFAULT
|
|
def_bool y
|
|
depends on PPC_BOOK3S_64
|
|
|
|
config ILLEGAL_POINTER_VALUE
|
|
hex
|
|
# This is roughly half way between the top of user space and the bottom
|
|
# of kernel space, which seems about as good as we can get.
|
|
default 0x5deadbeef0000000 if PPC64
|
|
default 0
|
|
|
|
config ARCH_MEMORY_PROBE
|
|
def_bool y
|
|
depends on MEMORY_HOTPLUG
|
|
|
|
choice
|
|
prompt "Page size"
|
|
default PPC_64K_PAGES if PPC_BOOK3S_64
|
|
default PPC_4K_PAGES
|
|
help
|
|
Select the kernel logical page size. Increasing the page size
|
|
will reduce software overhead at each page boundary, allow
|
|
hardware prefetch mechanisms to be more effective, and allow
|
|
larger dma transfers increasing IO efficiency and reducing
|
|
overhead. However the utilization of memory will increase.
|
|
For example, each cached file will using a multiple of the
|
|
page size to hold its contents and the difference between the
|
|
end of file and the end of page is wasted.
|
|
|
|
Some dedicated systems, such as software raid serving with
|
|
accelerated calculations, have shown significant increases.
|
|
|
|
If you configure a 64 bit kernel for 64k pages but the
|
|
processor does not support them, then the kernel will simulate
|
|
them with 4k pages, loading them on demand, but with the
|
|
reduced software overhead and larger internal fragmentation.
|
|
For the 32 bit kernel, a large page option will not be offered
|
|
unless it is supported by the configured processor.
|
|
|
|
If unsure, choose 4K_PAGES.
|
|
|
|
config PPC_4K_PAGES
|
|
bool "4k page size"
|
|
select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64
|
|
|
|
config PPC_16K_PAGES
|
|
bool "16k page size"
|
|
depends on 44x || PPC_8xx
|
|
|
|
config PPC_64K_PAGES
|
|
bool "64k page size"
|
|
depends on 44x || PPC_BOOK3S_64
|
|
select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64
|
|
|
|
config PPC_256K_PAGES
|
|
bool "256k page size (Requires non-standard binutils settings)"
|
|
depends on 44x && !PPC_47x
|
|
help
|
|
Make the page size 256k.
|
|
|
|
The kernel will only be able to run applications that have been
|
|
compiled with '-zmax-page-size' set to 256K (the default is 64K) using
|
|
binutils later than 2.17.50.0.3, or by patching the ELF_MAXPAGESIZE
|
|
definition from 0x10000 to 0x40000 in older versions.
|
|
|
|
endchoice
|
|
|
|
config PAGE_SIZE_4KB
|
|
def_bool y
|
|
depends on PPC_4K_PAGES
|
|
|
|
config PAGE_SIZE_16KB
|
|
def_bool y
|
|
depends on PPC_16K_PAGES
|
|
|
|
config PAGE_SIZE_64KB
|
|
def_bool y
|
|
depends on PPC_64K_PAGES
|
|
|
|
config PAGE_SIZE_256KB
|
|
def_bool y
|
|
depends on PPC_256K_PAGES
|
|
|
|
config PPC_PAGE_SHIFT
|
|
int
|
|
default 18 if PPC_256K_PAGES
|
|
default 16 if PPC_64K_PAGES
|
|
default 14 if PPC_16K_PAGES
|
|
default 12
|
|
|
|
config THREAD_SHIFT
|
|
int "Thread shift" if EXPERT
|
|
range 13 15
|
|
default "15" if PPC_256K_PAGES
|
|
default "14" if PPC64
|
|
default "13"
|
|
help
|
|
Used to define the stack size. The default is almost always what you
|
|
want. Only change this if you know what you are doing.
|
|
|
|
config DATA_SHIFT_BOOL
|
|
bool "Set custom data alignment"
|
|
depends on ADVANCED_OPTIONS
|
|
depends on STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE
|
|
depends on PPC_BOOK3S_32 || (PPC_8xx && !PIN_TLB_DATA && !STRICT_KERNEL_RWX) || \
|
|
PPC_85xx
|
|
help
|
|
This option allows you to set the kernel data alignment. When
|
|
RAM is mapped by blocks, the alignment needs to fit the size and
|
|
number of possible blocks. The default should be OK for most configs.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config DATA_SHIFT
|
|
int "Data shift" if DATA_SHIFT_BOOL
|
|
default 24 if STRICT_KERNEL_RWX && PPC64
|
|
range 17 28 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
|
|
range 19 23 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
|
|
range 20 24 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_85xx
|
|
default 22 if STRICT_KERNEL_RWX && PPC_BOOK3S_32
|
|
default 18 if (DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
|
|
default 23 if STRICT_KERNEL_RWX && PPC_8xx
|
|
default 23 if (DEBUG_PAGEALLOC || KFENCE) && PPC_8xx && PIN_TLB_DATA
|
|
default 19 if (DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
|
|
default 24 if STRICT_KERNEL_RWX && PPC_85xx
|
|
default PPC_PAGE_SHIFT
|
|
help
|
|
On Book3S 32 (603+), DBATs are used to map kernel text and rodata RO.
|
|
Smaller is the alignment, greater is the number of necessary DBATs.
|
|
|
|
On 8xx, large pages (512kb or 8M) are used to map kernel linear
|
|
memory. Aligning to 8M reduces TLB misses as only 8M pages are used
|
|
in that case. If PIN_TLB is selected, it must be aligned to 8M as
|
|
8M pages will be pinned.
|
|
|
|
config ARCH_FORCE_MAX_ORDER
|
|
int "Order of maximal physically contiguous allocations"
|
|
range 7 8 if PPC64 && PPC_64K_PAGES
|
|
default "8" if PPC64 && PPC_64K_PAGES
|
|
range 12 12 if PPC64 && !PPC_64K_PAGES
|
|
default "12" if PPC64 && !PPC_64K_PAGES
|
|
range 8 10 if PPC32 && PPC_16K_PAGES
|
|
default "8" if PPC32 && PPC_16K_PAGES
|
|
range 6 10 if PPC32 && PPC_64K_PAGES
|
|
default "6" if PPC32 && PPC_64K_PAGES
|
|
range 4 10 if PPC32 && PPC_256K_PAGES
|
|
default "4" if PPC32 && PPC_256K_PAGES
|
|
range 10 10
|
|
default "10"
|
|
help
|
|
The kernel page allocator limits the size of maximal physically
|
|
contiguous allocations. The limit is called MAX_ORDER and it
|
|
defines the maximal power of two of number of pages that can be
|
|
allocated as a single contiguous block. This option allows
|
|
overriding the default setting when ability to allocate very
|
|
large blocks of physically contiguous memory is required.
|
|
|
|
The page size is not necessarily 4KB. For example, on 64-bit
|
|
systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep
|
|
this in mind when choosing a value for this option.
|
|
|
|
Don't change if unsure.
|
|
|
|
config PPC_SUBPAGE_PROT
|
|
bool "Support setting protections for 4k subpages (subpage_prot syscall)"
|
|
default n
|
|
depends on PPC_64S_HASH_MMU && PPC_64K_PAGES
|
|
help
|
|
This option adds support for system call to allow user programs
|
|
to set access permissions (read/write, readonly, or no access)
|
|
on the 4k subpages of each 64k page.
|
|
|
|
If unsure, say N here.
|
|
|
|
config PPC_PROT_SAO_LPAR
|
|
bool "Support PROT_SAO mappings in LPARs"
|
|
depends on PPC_BOOK3S_64
|
|
help
|
|
This option adds support for PROT_SAO mappings from userspace
|
|
inside LPARs on supported CPUs.
|
|
|
|
This may cause issues when performing guest migration from
|
|
a CPU that supports SAO to one that does not.
|
|
|
|
If unsure, say N here.
|
|
|
|
config PPC_COPRO_BASE
|
|
bool
|
|
|
|
config SCHED_SMT
|
|
bool "SMT (Hyperthreading) scheduler support"
|
|
depends on PPC64 && SMP
|
|
help
|
|
SMT scheduler support improves the CPU scheduler's decision making
|
|
when dealing with POWER5 cpus at a cost of slightly increased
|
|
overhead in some places. If unsure say N here.
|
|
|
|
config PPC_DENORMALISATION
|
|
bool "PowerPC denormalisation exception handling"
|
|
depends on PPC_BOOK3S_64
|
|
default "y" if PPC_POWERNV
|
|
help
|
|
Add support for handling denormalisation of single precision
|
|
values. Useful for bare metal only. If unsure say Y here.
|
|
|
|
config CMDLINE
|
|
string "Initial kernel command string"
|
|
default ""
|
|
help
|
|
On some platforms, there is currently no way for the boot loader to
|
|
pass arguments to the kernel. For these platforms, you can supply
|
|
some command-line options at build time by entering them here. In
|
|
most cases you will need to specify the root device here.
|
|
|
|
choice
|
|
prompt "Kernel command line type" if CMDLINE != ""
|
|
default CMDLINE_FROM_BOOTLOADER
|
|
|
|
config CMDLINE_FROM_BOOTLOADER
|
|
bool "Use bootloader kernel arguments if available"
|
|
help
|
|
Uses the command-line options passed by the boot loader. If
|
|
the boot loader doesn't provide any, the default kernel command
|
|
string provided in CMDLINE will be used.
|
|
|
|
config CMDLINE_EXTEND
|
|
bool "Extend bootloader kernel arguments"
|
|
help
|
|
The command-line arguments provided by the boot loader will be
|
|
appended to the default kernel command string.
|
|
|
|
config CMDLINE_FORCE
|
|
bool "Always use the default kernel command string"
|
|
help
|
|
Always use the default kernel command string, even if the boot
|
|
loader passes other arguments to the kernel.
|
|
This is useful if you cannot or don't want to change the
|
|
command-line options your boot loader passes to the kernel.
|
|
|
|
endchoice
|
|
|
|
config EXTRA_TARGETS
|
|
string "Additional default image types"
|
|
help
|
|
List additional targets to be built by the bootwrapper here (separated
|
|
by spaces). This is useful for targets that depend of device tree
|
|
files in the .dts directory.
|
|
|
|
Targets in this list will be build as part of the default build
|
|
target, or when the user does a 'make zImage' or a
|
|
'make zImage.initrd'.
|
|
|
|
If unsure, leave blank
|
|
|
|
config ARCH_WANTS_FREEZER_CONTROL
|
|
def_bool y
|
|
depends on ADB_PMU
|
|
|
|
source "kernel/power/Kconfig"
|
|
|
|
config PPC_MEM_KEYS
|
|
prompt "PowerPC Memory Protection Keys"
|
|
def_bool y
|
|
depends on PPC_BOOK3S_64
|
|
depends on PPC_64S_HASH_MMU
|
|
select ARCH_USES_HIGH_VMA_FLAGS
|
|
select ARCH_HAS_PKEYS
|
|
help
|
|
Memory Protection Keys provides a mechanism for enforcing
|
|
page-based protections, but without requiring modification of the
|
|
page tables when an application changes protection domains.
|
|
|
|
For details, see Documentation/core-api/protection-keys.rst
|
|
|
|
If unsure, say y.
|
|
|
|
config PPC_SECURE_BOOT
|
|
prompt "Enable secure boot support"
|
|
bool
|
|
depends on PPC_POWERNV || PPC_PSERIES
|
|
depends on IMA_ARCH_POLICY
|
|
imply IMA_SECURE_AND_OR_TRUSTED_BOOT
|
|
select PSERIES_PLPKS if PPC_PSERIES
|
|
help
|
|
Systems with firmware secure boot enabled need to define security
|
|
policies to extend secure boot to the OS. This config allows a user
|
|
to enable OS secure boot on systems that have firmware support for
|
|
it. If in doubt say N.
|
|
|
|
config PPC_SECVAR_SYSFS
|
|
bool "Enable sysfs interface for POWER secure variables"
|
|
default y
|
|
depends on PPC_SECURE_BOOT
|
|
depends on SYSFS
|
|
help
|
|
POWER secure variables are managed and controlled by firmware.
|
|
These variables are exposed to userspace via sysfs to enable
|
|
read/write operations on these variables. Say Y if you have
|
|
secure boot enabled and want to expose variables to userspace.
|
|
|
|
endmenu
|
|
|
|
config ISA_DMA_API
|
|
bool
|
|
default PCI
|
|
|
|
menu "Bus options"
|
|
|
|
config ISA
|
|
bool "Support for ISA-bus hardware"
|
|
depends on PPC_CHRP
|
|
select PPC_I8259
|
|
help
|
|
Find out whether you have ISA slots on your motherboard. ISA is the
|
|
name of a bus system, i.e. the way the CPU talks to the other stuff
|
|
inside your box. If you have an Apple machine, say N here; if you
|
|
have an IBM RS/6000 or pSeries machine, say Y. If you have an
|
|
embedded board, consult your board documentation.
|
|
|
|
config GENERIC_ISA_DMA
|
|
bool
|
|
depends on ISA_DMA_API
|
|
default y
|
|
|
|
config PPC_INDIRECT_PCI
|
|
bool
|
|
depends on PCI
|
|
default y if 40x || 44x
|
|
|
|
config SBUS
|
|
bool
|
|
|
|
config FSL_SOC
|
|
bool
|
|
|
|
config FSL_PCI
|
|
bool
|
|
select ARCH_HAS_DMA_SET_MASK
|
|
select PPC_INDIRECT_PCI
|
|
select PCI_QUIRKS
|
|
|
|
config FSL_PMC
|
|
bool
|
|
default y
|
|
depends on SUSPEND && (PPC_85xx || PPC_86xx)
|
|
help
|
|
Freescale MPC85xx/MPC86xx power management controller support
|
|
(suspend/resume). For MPC83xx see platforms/83xx/suspend.c
|
|
|
|
config PPC4xx_CPM
|
|
bool
|
|
default y
|
|
depends on SUSPEND && (44x || 40x)
|
|
help
|
|
PPC4xx Clock Power Management (CPM) support (suspend/resume).
|
|
It also enables support for two different idle states (idle-wait
|
|
and idle-doze).
|
|
|
|
config 4xx_SOC
|
|
bool
|
|
|
|
config FSL_LBC
|
|
bool "Freescale Local Bus support"
|
|
help
|
|
Enables reporting of errors from the Freescale local bus
|
|
controller. Also contains some common code used by
|
|
drivers for specific local bus peripherals.
|
|
|
|
config FSL_GTM
|
|
bool
|
|
depends on PPC_83xx || QUICC_ENGINE || CPM2
|
|
help
|
|
Freescale General-purpose Timers support
|
|
|
|
config PCI_8260
|
|
bool
|
|
depends on PCI && 8260
|
|
select PPC_INDIRECT_PCI
|
|
default y
|
|
|
|
config FSL_RIO
|
|
bool "Freescale Embedded SRIO Controller support"
|
|
depends on RAPIDIO = y && HAVE_RAPIDIO
|
|
default "n"
|
|
help
|
|
Include support for RapidIO controller on Freescale embedded
|
|
processors (MPC8548, MPC8641, etc).
|
|
|
|
endmenu
|
|
|
|
config NONSTATIC_KERNEL
|
|
bool
|
|
|
|
menu "Advanced setup"
|
|
depends on PPC32
|
|
|
|
config ADVANCED_OPTIONS
|
|
bool "Prompt for advanced kernel configuration options"
|
|
help
|
|
This option will enable prompting for a variety of advanced kernel
|
|
configuration options. These options can cause the kernel to not
|
|
work if they are set incorrectly, but can be used to optimize certain
|
|
aspects of kernel memory management.
|
|
|
|
Unless you know what you are doing, say N here.
|
|
|
|
comment "Default settings for advanced configuration options are used"
|
|
depends on !ADVANCED_OPTIONS
|
|
|
|
config LOWMEM_SIZE_BOOL
|
|
bool "Set maximum low memory"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the maximum amount of memory which
|
|
will be used as "low memory", that is, memory which the kernel can
|
|
access directly, without having to set up a kernel virtual mapping.
|
|
This can be useful in optimizing the layout of kernel virtual
|
|
memory.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config LOWMEM_SIZE
|
|
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
|
|
default "0x30000000"
|
|
|
|
config LOWMEM_CAM_NUM_BOOL
|
|
bool "Set number of CAMs to use to map low memory"
|
|
depends on ADVANCED_OPTIONS && PPC_85xx
|
|
help
|
|
This option allows you to set the maximum number of CAM slots that
|
|
will be used to map low memory. There are a limited number of slots
|
|
available and even more limited number that will fit in the L1 MMU.
|
|
However, using more entries will allow mapping more low memory. This
|
|
can be useful in optimizing the layout of kernel virtual memory.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config LOWMEM_CAM_NUM
|
|
depends on PPC_85xx
|
|
int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
|
|
default 3 if !STRICT_KERNEL_RWX
|
|
default 9 if DATA_SHIFT >= 24
|
|
default 12 if DATA_SHIFT >= 22
|
|
default 15
|
|
|
|
config DYNAMIC_MEMSTART
|
|
bool "Enable page aligned dynamic load address for kernel"
|
|
depends on ADVANCED_OPTIONS && FLATMEM && (PPC_85xx || 44x)
|
|
select NONSTATIC_KERNEL
|
|
help
|
|
This option enables the kernel to be loaded at any page aligned
|
|
physical address. The kernel creates a mapping from KERNELBASE to
|
|
the address where the kernel is loaded. The page size here implies
|
|
the TLB page size of the mapping for kernel on the particular platform.
|
|
Please refer to the init code for finding the TLB page size.
|
|
|
|
DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
|
|
kernel image, where the only restriction is the page aligned kernel
|
|
load address. When this option is enabled, the compile time physical
|
|
address CONFIG_PHYSICAL_START is ignored.
|
|
|
|
This option is overridden by CONFIG_RELOCATABLE
|
|
|
|
config PAGE_OFFSET_BOOL
|
|
bool "Set custom page offset address"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the kernel virtual address at which
|
|
the kernel will map low memory. This can be useful in optimizing
|
|
the virtual memory layout of the system.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config PAGE_OFFSET
|
|
hex "Virtual address of memory base" if PAGE_OFFSET_BOOL
|
|
default "0xc0000000"
|
|
|
|
config KERNEL_START_BOOL
|
|
bool "Set custom kernel base address"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the kernel virtual address at which
|
|
the kernel will be loaded. Normally this should match PAGE_OFFSET
|
|
however there are times (like kdump) that one might not want them
|
|
to be the same.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config KERNEL_START
|
|
hex "Virtual address of kernel base" if KERNEL_START_BOOL
|
|
default PAGE_OFFSET if PAGE_OFFSET_BOOL
|
|
default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
|
|
default "0xc0000000"
|
|
|
|
config PHYSICAL_START_BOOL
|
|
bool "Set physical address where the kernel is loaded"
|
|
depends on ADVANCED_OPTIONS && FLATMEM && PPC_85xx
|
|
help
|
|
This gives the physical address where the kernel is loaded.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config PHYSICAL_START
|
|
hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
|
|
default "0x02000000" if PPC_BOOK3S && CRASH_DUMP && !NONSTATIC_KERNEL
|
|
default "0x00000000"
|
|
|
|
config PHYSICAL_ALIGN
|
|
hex
|
|
default "0x04000000" if PPC_85xx
|
|
help
|
|
This value puts the alignment restrictions on physical address
|
|
where kernel is loaded and run from. Kernel is compiled for an
|
|
address which meets above alignment restriction.
|
|
|
|
config TASK_SIZE_BOOL
|
|
bool "Set custom user task size"
|
|
depends on ADVANCED_OPTIONS
|
|
help
|
|
This option allows you to set the amount of virtual address space
|
|
allocated to user tasks. This can be useful in optimizing the
|
|
virtual memory layout of the system.
|
|
|
|
Say N here unless you know what you are doing.
|
|
|
|
config TASK_SIZE
|
|
hex "Size of user task space" if TASK_SIZE_BOOL
|
|
default "0x80000000" if PPC_8xx
|
|
default "0xb0000000" if PPC_BOOK3S_32
|
|
default "0xc0000000"
|
|
endmenu
|
|
|
|
if PPC64
|
|
# This value must have zeroes in the bottom 60 bits otherwise lots will break
|
|
config PAGE_OFFSET
|
|
hex
|
|
default "0xc000000000000000"
|
|
config KERNEL_START
|
|
hex
|
|
default "0xc000000000000000"
|
|
config PHYSICAL_START
|
|
hex
|
|
default "0x00000000"
|
|
endif
|
|
|
|
config PPC_LIB_RHEAP
|
|
bool
|
|
|
|
source "arch/powerpc/kvm/Kconfig"
|
|
|
|
source "kernel/livepatch/Kconfig"
|