mirror of
https://github.com/torvalds/linux.git
synced 2024-11-01 01:31:44 +00:00
c4e773764c
The use of a memcpy() during a spinlock operation will cause very long thread context switch delays if the flash chip bandwidth is low and the data to be copied large, because a spinlock will disable preemption. For example: A flash with 6,5 MB/s bandwidth will cause under ubifs, which request sometimes 128 KiB (the flash erase size), a preemption delay of 20 milliseconds. High priority threads will not be served during this time, regardless whether this threads access the flash or not. This behavior breaks real time. The patch changes all the use of spin_lock operations for xxxx->mutex into mutex operations, which is exact what the name says and means. I have checked the code of the drivers and there is no use of atomic pathes like interrupt or timers. The mtdoops facility will also not be used by this drivers. So it is dave to replace the spin_lock against mutex. There is no performance regression since the mutex is normally not acquired. Changelog: 06.03.2010 First release 26.03.2010 Fix mutex[1] issue and tested it for compile failure Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
265 lines
6.7 KiB
C
265 lines
6.7 KiB
C
/*
|
|
* Routines common to all CFI-type probes.
|
|
* (C) 2001-2003 Red Hat, Inc.
|
|
* GPL'd
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/map.h>
|
|
#include <linux/mtd/cfi.h>
|
|
#include <linux/mtd/gen_probe.h>
|
|
|
|
static struct mtd_info *check_cmd_set(struct map_info *, int);
|
|
static struct cfi_private *genprobe_ident_chips(struct map_info *map,
|
|
struct chip_probe *cp);
|
|
static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp,
|
|
struct cfi_private *cfi);
|
|
|
|
struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp)
|
|
{
|
|
struct mtd_info *mtd = NULL;
|
|
struct cfi_private *cfi;
|
|
|
|
/* First probe the map to see if we have CFI stuff there. */
|
|
cfi = genprobe_ident_chips(map, cp);
|
|
|
|
if (!cfi)
|
|
return NULL;
|
|
|
|
map->fldrv_priv = cfi;
|
|
/* OK we liked it. Now find a driver for the command set it talks */
|
|
|
|
mtd = check_cmd_set(map, 1); /* First the primary cmdset */
|
|
if (!mtd)
|
|
mtd = check_cmd_set(map, 0); /* Then the secondary */
|
|
|
|
if (mtd) {
|
|
if (mtd->size > map->size) {
|
|
printk(KERN_WARNING "Reducing visibility of %ldKiB chip to %ldKiB\n",
|
|
(unsigned long)mtd->size >> 10,
|
|
(unsigned long)map->size >> 10);
|
|
mtd->size = map->size;
|
|
}
|
|
return mtd;
|
|
}
|
|
|
|
printk(KERN_WARNING"gen_probe: No supported Vendor Command Set found\n");
|
|
|
|
kfree(cfi->cfiq);
|
|
kfree(cfi);
|
|
map->fldrv_priv = NULL;
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(mtd_do_chip_probe);
|
|
|
|
|
|
static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe *cp)
|
|
{
|
|
struct cfi_private cfi;
|
|
struct cfi_private *retcfi;
|
|
unsigned long *chip_map;
|
|
int i, j, mapsize;
|
|
int max_chips;
|
|
|
|
memset(&cfi, 0, sizeof(cfi));
|
|
|
|
/* Call the probetype-specific code with all permutations of
|
|
interleave and device type, etc. */
|
|
if (!genprobe_new_chip(map, cp, &cfi)) {
|
|
/* The probe didn't like it */
|
|
pr_debug("%s: Found no %s device at location zero\n",
|
|
cp->name, map->name);
|
|
return NULL;
|
|
}
|
|
|
|
#if 0 /* Let the CFI probe routine do this sanity check. The Intel and AMD
|
|
probe routines won't ever return a broken CFI structure anyway,
|
|
because they make them up themselves.
|
|
*/
|
|
if (cfi.cfiq->NumEraseRegions == 0) {
|
|
printk(KERN_WARNING "Number of erase regions is zero\n");
|
|
kfree(cfi.cfiq);
|
|
return NULL;
|
|
}
|
|
#endif
|
|
cfi.chipshift = cfi.cfiq->DevSize;
|
|
|
|
if (cfi_interleave_is_1(&cfi)) {
|
|
;
|
|
} else if (cfi_interleave_is_2(&cfi)) {
|
|
cfi.chipshift++;
|
|
} else if (cfi_interleave_is_4((&cfi))) {
|
|
cfi.chipshift += 2;
|
|
} else if (cfi_interleave_is_8(&cfi)) {
|
|
cfi.chipshift += 3;
|
|
} else {
|
|
BUG();
|
|
}
|
|
|
|
cfi.numchips = 1;
|
|
|
|
/*
|
|
* Allocate memory for bitmap of valid chips.
|
|
* Align bitmap storage size to full byte.
|
|
*/
|
|
max_chips = map->size >> cfi.chipshift;
|
|
if (!max_chips) {
|
|
printk(KERN_WARNING "NOR chip too large to fit in mapping. Attempting to cope...\n");
|
|
max_chips = 1;
|
|
}
|
|
|
|
mapsize = sizeof(long) * DIV_ROUND_UP(max_chips, BITS_PER_LONG);
|
|
chip_map = kzalloc(mapsize, GFP_KERNEL);
|
|
if (!chip_map) {
|
|
printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
|
|
kfree(cfi.cfiq);
|
|
return NULL;
|
|
}
|
|
|
|
set_bit(0, chip_map); /* Mark first chip valid */
|
|
|
|
/*
|
|
* Now probe for other chips, checking sensibly for aliases while
|
|
* we're at it. The new_chip probe above should have let the first
|
|
* chip in read mode.
|
|
*/
|
|
|
|
for (i = 1; i < max_chips; i++) {
|
|
cp->probe_chip(map, i << cfi.chipshift, chip_map, &cfi);
|
|
}
|
|
|
|
/*
|
|
* Now allocate the space for the structures we need to return to
|
|
* our caller, and copy the appropriate data into them.
|
|
*/
|
|
|
|
retcfi = kmalloc(sizeof(struct cfi_private) + cfi.numchips * sizeof(struct flchip), GFP_KERNEL);
|
|
|
|
if (!retcfi) {
|
|
printk(KERN_WARNING "%s: kmalloc failed for CFI private structure\n", map->name);
|
|
kfree(cfi.cfiq);
|
|
kfree(chip_map);
|
|
return NULL;
|
|
}
|
|
|
|
memcpy(retcfi, &cfi, sizeof(cfi));
|
|
memset(&retcfi->chips[0], 0, sizeof(struct flchip) * cfi.numchips);
|
|
|
|
for (i = 0, j = 0; (j < cfi.numchips) && (i < max_chips); i++) {
|
|
if(test_bit(i, chip_map)) {
|
|
struct flchip *pchip = &retcfi->chips[j++];
|
|
|
|
pchip->start = (i << cfi.chipshift);
|
|
pchip->state = FL_READY;
|
|
init_waitqueue_head(&pchip->wq);
|
|
mutex_init(&pchip->mutex);
|
|
}
|
|
}
|
|
|
|
kfree(chip_map);
|
|
return retcfi;
|
|
}
|
|
|
|
|
|
static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp,
|
|
struct cfi_private *cfi)
|
|
{
|
|
int min_chips = (map_bankwidth(map)/4?:1); /* At most 4-bytes wide. */
|
|
int max_chips = map_bankwidth(map); /* And minimum 1 */
|
|
int nr_chips, type;
|
|
|
|
for (nr_chips = max_chips; nr_chips >= min_chips; nr_chips >>= 1) {
|
|
|
|
if (!cfi_interleave_supported(nr_chips))
|
|
continue;
|
|
|
|
cfi->interleave = nr_chips;
|
|
|
|
/* Minimum device size. Don't look for one 8-bit device
|
|
in a 16-bit bus, etc. */
|
|
type = map_bankwidth(map) / nr_chips;
|
|
|
|
for (; type <= CFI_DEVICETYPE_X32; type<<=1) {
|
|
cfi->device_type = type;
|
|
|
|
if (cp->probe_chip(map, 0, NULL, cfi))
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
typedef struct mtd_info *cfi_cmdset_fn_t(struct map_info *, int);
|
|
|
|
extern cfi_cmdset_fn_t cfi_cmdset_0001;
|
|
extern cfi_cmdset_fn_t cfi_cmdset_0002;
|
|
extern cfi_cmdset_fn_t cfi_cmdset_0020;
|
|
|
|
static inline struct mtd_info *cfi_cmdset_unknown(struct map_info *map,
|
|
int primary)
|
|
{
|
|
struct cfi_private *cfi = map->fldrv_priv;
|
|
__u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID;
|
|
#ifdef CONFIG_MODULES
|
|
char probename[16+sizeof(MODULE_SYMBOL_PREFIX)];
|
|
cfi_cmdset_fn_t *probe_function;
|
|
|
|
sprintf(probename, MODULE_SYMBOL_PREFIX "cfi_cmdset_%4.4X", type);
|
|
|
|
probe_function = __symbol_get(probename);
|
|
if (!probe_function) {
|
|
request_module(probename + sizeof(MODULE_SYMBOL_PREFIX) - 1);
|
|
probe_function = __symbol_get(probename);
|
|
}
|
|
|
|
if (probe_function) {
|
|
struct mtd_info *mtd;
|
|
|
|
mtd = (*probe_function)(map, primary);
|
|
/* If it was happy, it'll have increased its own use count */
|
|
symbol_put_addr(probe_function);
|
|
return mtd;
|
|
}
|
|
#endif
|
|
printk(KERN_NOTICE "Support for command set %04X not present\n", type);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct mtd_info *check_cmd_set(struct map_info *map, int primary)
|
|
{
|
|
struct cfi_private *cfi = map->fldrv_priv;
|
|
__u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID;
|
|
|
|
if (type == P_ID_NONE || type == P_ID_RESERVED)
|
|
return NULL;
|
|
|
|
switch(type){
|
|
/* We need these for the !CONFIG_MODULES case,
|
|
because symbol_get() doesn't work there */
|
|
#ifdef CONFIG_MTD_CFI_INTELEXT
|
|
case 0x0001:
|
|
case 0x0003:
|
|
case 0x0200:
|
|
return cfi_cmdset_0001(map, primary);
|
|
#endif
|
|
#ifdef CONFIG_MTD_CFI_AMDSTD
|
|
case 0x0002:
|
|
return cfi_cmdset_0002(map, primary);
|
|
#endif
|
|
#ifdef CONFIG_MTD_CFI_STAA
|
|
case 0x0020:
|
|
return cfi_cmdset_0020(map, primary);
|
|
#endif
|
|
default:
|
|
return cfi_cmdset_unknown(map, primary);
|
|
}
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
|
|
MODULE_DESCRIPTION("Helper routines for flash chip probe code");
|