mirror of
https://github.com/torvalds/linux.git
synced 2024-11-05 03:21:32 +00:00
2c9b9c8490
... and rename the function since it no longer operates on just pages. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
470 lines
11 KiB
ArmAsm
470 lines
11 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E
|
|
*
|
|
* Copyright (C) 2000 ARM Limited
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd.
|
|
* hacked for non-paged-MM by Hyok S. Choi, 2003.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*
|
|
* These are the low level assembler for performing cache and TLB
|
|
* functions on the ARM1022E.
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
/*
|
|
* This is the maximum size of an area which will be invalidated
|
|
* using the single invalidate entry instructions. Anything larger
|
|
* than this, and we go for the whole cache.
|
|
*
|
|
* This value should be chosen such that we choose the cheapest
|
|
* alternative.
|
|
*/
|
|
#define MAX_AREA_SIZE 32768
|
|
|
|
/*
|
|
* The size of one data cache line.
|
|
*/
|
|
#define CACHE_DLINESIZE 32
|
|
|
|
/*
|
|
* The number of data cache segments.
|
|
*/
|
|
#define CACHE_DSEGMENTS 16
|
|
|
|
/*
|
|
* The number of lines in a cache segment.
|
|
*/
|
|
#define CACHE_DENTRIES 64
|
|
|
|
/*
|
|
* This is the size at which it becomes more efficient to
|
|
* clean the whole cache, rather than using the individual
|
|
* cache line maintainence instructions.
|
|
*/
|
|
#define CACHE_DLIMIT 32768
|
|
|
|
.text
|
|
/*
|
|
* cpu_arm1022_proc_init()
|
|
*/
|
|
ENTRY(cpu_arm1022_proc_init)
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_arm1022_proc_fin()
|
|
*/
|
|
ENTRY(cpu_arm1022_proc_fin)
|
|
stmfd sp!, {lr}
|
|
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
|
|
msr cpsr_c, ip
|
|
bl arm1022_flush_kern_cache_all
|
|
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
|
|
bic r0, r0, #0x1000 @ ...i............
|
|
bic r0, r0, #0x000e @ ............wca.
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
ldmfd sp!, {pc}
|
|
|
|
/*
|
|
* cpu_arm1022_reset(loc)
|
|
*
|
|
* Perform a soft reset of the system. Put the CPU into the
|
|
* same state as it would be if it had been reset, and branch
|
|
* to what would be the reset vector.
|
|
*
|
|
* loc: location to jump to for soft reset
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_arm1022_reset)
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
|
#endif
|
|
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
bic ip, ip, #0x000f @ ............wcam
|
|
bic ip, ip, #0x1100 @ ...i...s........
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
mov pc, r0
|
|
|
|
/*
|
|
* cpu_arm1022_do_idle()
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_arm1022_do_idle)
|
|
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
|
|
mov pc, lr
|
|
|
|
/* ================================= CACHE ================================ */
|
|
|
|
.align 5
|
|
/*
|
|
* flush_user_cache_all()
|
|
*
|
|
* Invalidate all cache entries in a particular address
|
|
* space.
|
|
*/
|
|
ENTRY(arm1022_flush_user_cache_all)
|
|
/* FALLTHROUGH */
|
|
/*
|
|
* flush_kern_cache_all()
|
|
*
|
|
* Clean and invalidate the entire cache.
|
|
*/
|
|
ENTRY(arm1022_flush_kern_cache_all)
|
|
mov r2, #VM_EXEC
|
|
mov ip, #0
|
|
__flush_whole_cache:
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
|
|
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
|
|
2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
|
|
subs r3, r3, #1 << 26
|
|
bcs 2b @ entries 63 to 0
|
|
subs r1, r1, #1 << 5
|
|
bcs 1b @ segments 15 to 0
|
|
#endif
|
|
tst r2, #VM_EXEC
|
|
#ifndef CONFIG_CPU_ICACHE_DISABLE
|
|
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
|
|
#endif
|
|
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* flush_user_cache_range(start, end, flags)
|
|
*
|
|
* Invalidate a range of cache entries in the specified
|
|
* address space.
|
|
*
|
|
* - start - start address (inclusive)
|
|
* - end - end address (exclusive)
|
|
* - flags - vm_flags for this space
|
|
*/
|
|
ENTRY(arm1022_flush_user_cache_range)
|
|
mov ip, #0
|
|
sub r3, r1, r0 @ calculate total size
|
|
cmp r3, #CACHE_DLIMIT
|
|
bhs __flush_whole_cache
|
|
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
#endif
|
|
tst r2, #VM_EXEC
|
|
#ifndef CONFIG_CPU_ICACHE_DISABLE
|
|
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
|
|
#endif
|
|
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* coherent_kern_range(start, end)
|
|
*
|
|
* Ensure coherency between the Icache and the Dcache in the
|
|
* region described by start. If you have non-snooping
|
|
* Harvard caches, you need to implement this function.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*/
|
|
ENTRY(arm1022_coherent_kern_range)
|
|
/* FALLTHROUGH */
|
|
|
|
/*
|
|
* coherent_user_range(start, end)
|
|
*
|
|
* Ensure coherency between the Icache and the Dcache in the
|
|
* region described by start. If you have non-snooping
|
|
* Harvard caches, you need to implement this function.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*/
|
|
ENTRY(arm1022_coherent_user_range)
|
|
mov ip, #0
|
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
|
1:
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
#endif
|
|
#ifndef CONFIG_CPU_ICACHE_DISABLE
|
|
mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
|
#endif
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* flush_kern_dcache_area(void *addr, size_t size)
|
|
*
|
|
* Ensure no D cache aliasing occurs, either with itself or
|
|
* the I cache
|
|
*
|
|
* - addr - kernel address
|
|
* - size - region size
|
|
*/
|
|
ENTRY(arm1022_flush_kern_dcache_area)
|
|
mov ip, #0
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
add r1, r0, r1
|
|
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
#endif
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_inv_range(start, end)
|
|
*
|
|
* Invalidate (discard) the specified virtual address range.
|
|
* May not write back any entries. If 'start' or 'end'
|
|
* are not cache line aligned, those lines must be written
|
|
* back.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*
|
|
* (same as v4wb)
|
|
*/
|
|
ENTRY(arm1022_dma_inv_range)
|
|
mov ip, #0
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
tst r0, #CACHE_DLINESIZE - 1
|
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
|
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
tst r1, #CACHE_DLINESIZE - 1
|
|
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
|
|
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
#endif
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_clean_range(start, end)
|
|
*
|
|
* Clean the specified virtual address range.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*
|
|
* (same as v4wb)
|
|
*/
|
|
ENTRY(arm1022_dma_clean_range)
|
|
mov ip, #0
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
#endif
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
/*
|
|
* dma_flush_range(start, end)
|
|
*
|
|
* Clean and invalidate the specified virtual address range.
|
|
*
|
|
* - start - virtual start address
|
|
* - end - virtual end address
|
|
*/
|
|
ENTRY(arm1022_dma_flush_range)
|
|
mov ip, #0
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
|
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
cmp r0, r1
|
|
blo 1b
|
|
#endif
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
ENTRY(arm1022_cache_fns)
|
|
.long arm1022_flush_kern_cache_all
|
|
.long arm1022_flush_user_cache_all
|
|
.long arm1022_flush_user_cache_range
|
|
.long arm1022_coherent_kern_range
|
|
.long arm1022_coherent_user_range
|
|
.long arm1022_flush_kern_dcache_area
|
|
.long arm1022_dma_inv_range
|
|
.long arm1022_dma_clean_range
|
|
.long arm1022_dma_flush_range
|
|
|
|
.align 5
|
|
ENTRY(cpu_arm1022_dcache_clean_area)
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
mov ip, #0
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, #CACHE_DLINESIZE
|
|
subs r1, r1, #CACHE_DLINESIZE
|
|
bhi 1b
|
|
#endif
|
|
mov pc, lr
|
|
|
|
/* =============================== PageTable ============================== */
|
|
|
|
/*
|
|
* cpu_arm1022_switch_mm(pgd)
|
|
*
|
|
* Set the translation base pointer to be as described by pgd.
|
|
*
|
|
* pgd: new page tables
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_arm1022_switch_mm)
|
|
#ifdef CONFIG_MMU
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
|
|
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
|
|
2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
|
|
subs r3, r3, #1 << 26
|
|
bcs 2b @ entries 63 to 0
|
|
subs r1, r1, #1 << 5
|
|
bcs 1b @ segments 15 to 0
|
|
#endif
|
|
mov r1, #0
|
|
#ifndef CONFIG_CPU_ICACHE_DISABLE
|
|
mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
|
|
#endif
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
|
|
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
|
|
#endif
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_arm1022_set_pte_ext(ptep, pte, ext)
|
|
*
|
|
* Set a PTE and flush it out
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_arm1022_set_pte_ext)
|
|
#ifdef CONFIG_MMU
|
|
armv3_set_pte_ext
|
|
mov r0, r0
|
|
#ifndef CONFIG_CPU_DCACHE_DISABLE
|
|
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
#endif
|
|
#endif /* CONFIG_MMU */
|
|
mov pc, lr
|
|
|
|
__INIT
|
|
|
|
.type __arm1022_setup, #function
|
|
__arm1022_setup:
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
|
|
#endif
|
|
adr r5, arm1022_crval
|
|
ldmia r5, {r5, r6}
|
|
mrc p15, 0, r0, c1, c0 @ get control register v4
|
|
bic r0, r0, r5
|
|
orr r0, r0, r6
|
|
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
|
|
orr r0, r0, #0x4000 @ .R..............
|
|
#endif
|
|
mov pc, lr
|
|
.size __arm1022_setup, . - __arm1022_setup
|
|
|
|
/*
|
|
* R
|
|
* .RVI ZFRS BLDP WCAM
|
|
* .011 1001 ..11 0101
|
|
*
|
|
*/
|
|
.type arm1022_crval, #object
|
|
arm1022_crval:
|
|
crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
|
|
|
|
__INITDATA
|
|
|
|
/*
|
|
* Purpose : Function pointers used to access above functions - all calls
|
|
* come through these
|
|
*/
|
|
.type arm1022_processor_functions, #object
|
|
arm1022_processor_functions:
|
|
.word v4t_early_abort
|
|
.word legacy_pabort
|
|
.word cpu_arm1022_proc_init
|
|
.word cpu_arm1022_proc_fin
|
|
.word cpu_arm1022_reset
|
|
.word cpu_arm1022_do_idle
|
|
.word cpu_arm1022_dcache_clean_area
|
|
.word cpu_arm1022_switch_mm
|
|
.word cpu_arm1022_set_pte_ext
|
|
.size arm1022_processor_functions, . - arm1022_processor_functions
|
|
|
|
.section ".rodata"
|
|
|
|
.type cpu_arch_name, #object
|
|
cpu_arch_name:
|
|
.asciz "armv5te"
|
|
.size cpu_arch_name, . - cpu_arch_name
|
|
|
|
.type cpu_elf_name, #object
|
|
cpu_elf_name:
|
|
.asciz "v5"
|
|
.size cpu_elf_name, . - cpu_elf_name
|
|
|
|
.type cpu_arm1022_name, #object
|
|
cpu_arm1022_name:
|
|
.asciz "ARM1022"
|
|
.size cpu_arm1022_name, . - cpu_arm1022_name
|
|
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
|
|
.type __arm1022_proc_info,#object
|
|
__arm1022_proc_info:
|
|
.long 0x4105a220 @ ARM 1022E (v5TE)
|
|
.long 0xff0ffff0
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_BIT4 | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_BIT4 | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
b __arm1022_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
|
|
.long cpu_arm1022_name
|
|
.long arm1022_processor_functions
|
|
.long v4wbi_tlb_fns
|
|
.long v4wb_user_fns
|
|
.long arm1022_cache_fns
|
|
.size __arm1022_proc_info, . - __arm1022_proc_info
|