mirror of
https://github.com/torvalds/linux.git
synced 2024-12-04 18:13:04 +00:00
53b54ad074
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus Reset, but not after a DPC-induced Hot Reset. As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not observed and devices on the secondary bus may be accessed before they're ready. One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a PCIe switch whose upstream port is not immediately ready after reset. Because its config space is restored too early, it remains in D0uninitialized, its subordinate devices remain inaccessible and DPC recovery fails with messages such as: i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible) intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible) pcieport 0000:89:02.0: AER: device recovery failed Fix it. Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org |
||
|---|---|---|
| .. | ||
| controller | ||
| endpoint | ||
| hotplug | ||
| msi | ||
| pcie | ||
| switch | ||
| access.c | ||
| ats.c | ||
| bus.c | ||
| doe.c | ||
| ecam.c | ||
| host-bridge.c | ||
| iov.c | ||
| irq.c | ||
| Kconfig | ||
| Makefile | ||
| mmap.c | ||
| of.c | ||
| p2pdma.c | ||
| pci-acpi.c | ||
| pci-bridge-emul.c | ||
| pci-bridge-emul.h | ||
| pci-driver.c | ||
| pci-label.c | ||
| pci-mid.c | ||
| pci-pf-stub.c | ||
| pci-stub.c | ||
| pci-sysfs.c | ||
| pci.c | ||
| pci.h | ||
| probe.c | ||
| proc.c | ||
| quirks.c | ||
| remove.c | ||
| rom.c | ||
| search.c | ||
| setup-bus.c | ||
| setup-irq.c | ||
| setup-res.c | ||
| slot.c | ||
| syscall.c | ||
| vc.c | ||
| vgaarb.c | ||
| vpd.c | ||
| xen-pcifront.c | ||