mirror of
https://github.com/torvalds/linux.git
synced 2024-12-21 02:21:36 +00:00
528222d853
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
437 lines
9.7 KiB
C
437 lines
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* TechnoTrend USB IR Receiver
|
|
*
|
|
* Copyright (C) 2012 Sean Young <sean@mess.org>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/input.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/leds.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#define DRIVER_NAME "ttusbir"
|
|
#define DRIVER_DESC "TechnoTrend USB IR Receiver"
|
|
/*
|
|
* The Windows driver uses 8 URBS, the original lirc drivers has a
|
|
* configurable amount (2 default, 4 max). This device generates about 125
|
|
* messages per second (!), whether IR is idle or not.
|
|
*/
|
|
#define NUM_URBS 4
|
|
#define US_PER_BYTE 62
|
|
#define US_PER_BIT (US_PER_BYTE / 8)
|
|
|
|
struct ttusbir {
|
|
struct rc_dev *rc;
|
|
struct device *dev;
|
|
struct usb_device *udev;
|
|
|
|
struct urb *urb[NUM_URBS];
|
|
|
|
struct led_classdev led;
|
|
struct urb *bulk_urb;
|
|
uint8_t bulk_buffer[5];
|
|
int bulk_out_endp, iso_in_endp;
|
|
bool led_on, is_led_on;
|
|
atomic_t led_complete;
|
|
|
|
char phys[64];
|
|
};
|
|
|
|
static enum led_brightness ttusbir_brightness_get(struct led_classdev *led_dev)
|
|
{
|
|
struct ttusbir *tt = container_of(led_dev, struct ttusbir, led);
|
|
|
|
return tt->led_on ? LED_FULL : LED_OFF;
|
|
}
|
|
|
|
static void ttusbir_set_led(struct ttusbir *tt)
|
|
{
|
|
int ret;
|
|
|
|
smp_mb();
|
|
|
|
if (tt->led_on != tt->is_led_on && tt->udev &&
|
|
atomic_add_unless(&tt->led_complete, 1, 1)) {
|
|
tt->bulk_buffer[4] = tt->is_led_on = tt->led_on;
|
|
ret = usb_submit_urb(tt->bulk_urb, GFP_ATOMIC);
|
|
if (ret) {
|
|
dev_warn(tt->dev, "failed to submit bulk urb: %d\n",
|
|
ret);
|
|
atomic_dec(&tt->led_complete);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ttusbir_brightness_set(struct led_classdev *led_dev, enum
|
|
led_brightness brightness)
|
|
{
|
|
struct ttusbir *tt = container_of(led_dev, struct ttusbir, led);
|
|
|
|
tt->led_on = brightness != LED_OFF;
|
|
|
|
ttusbir_set_led(tt);
|
|
}
|
|
|
|
/*
|
|
* The urb cannot be reused until the urb completes
|
|
*/
|
|
static void ttusbir_bulk_complete(struct urb *urb)
|
|
{
|
|
struct ttusbir *tt = urb->context;
|
|
|
|
atomic_dec(&tt->led_complete);
|
|
|
|
switch (urb->status) {
|
|
case 0:
|
|
break;
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
usb_unlink_urb(urb);
|
|
return;
|
|
case -EPIPE:
|
|
default:
|
|
dev_dbg(tt->dev, "Error: urb status = %d\n", urb->status);
|
|
break;
|
|
}
|
|
|
|
ttusbir_set_led(tt);
|
|
}
|
|
|
|
/*
|
|
* The data is one bit per sample, a set bit signifying silence and samples
|
|
* being MSB first. Bit 0 can contain garbage so take it to be whatever
|
|
* bit 1 is, so we don't have unexpected edges.
|
|
*/
|
|
static void ttusbir_process_ir_data(struct ttusbir *tt, uint8_t *buf)
|
|
{
|
|
struct ir_raw_event rawir = {};
|
|
unsigned i, v, b;
|
|
bool event = false;
|
|
|
|
for (i = 0; i < 128; i++) {
|
|
v = buf[i] & 0xfe;
|
|
switch (v) {
|
|
case 0xfe:
|
|
rawir.pulse = false;
|
|
rawir.duration = US_PER_BYTE;
|
|
if (ir_raw_event_store_with_filter(tt->rc, &rawir))
|
|
event = true;
|
|
break;
|
|
case 0:
|
|
rawir.pulse = true;
|
|
rawir.duration = US_PER_BYTE;
|
|
if (ir_raw_event_store_with_filter(tt->rc, &rawir))
|
|
event = true;
|
|
break;
|
|
default:
|
|
/* one edge per byte */
|
|
if (v & 2) {
|
|
b = ffz(v | 1);
|
|
rawir.pulse = true;
|
|
} else {
|
|
b = ffs(v) - 1;
|
|
rawir.pulse = false;
|
|
}
|
|
|
|
rawir.duration = US_PER_BIT * (8 - b);
|
|
if (ir_raw_event_store_with_filter(tt->rc, &rawir))
|
|
event = true;
|
|
|
|
rawir.pulse = !rawir.pulse;
|
|
rawir.duration = US_PER_BIT * b;
|
|
if (ir_raw_event_store_with_filter(tt->rc, &rawir))
|
|
event = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* don't wakeup when there's nothing to do */
|
|
if (event)
|
|
ir_raw_event_handle(tt->rc);
|
|
}
|
|
|
|
static void ttusbir_urb_complete(struct urb *urb)
|
|
{
|
|
struct ttusbir *tt = urb->context;
|
|
int rc;
|
|
|
|
switch (urb->status) {
|
|
case 0:
|
|
ttusbir_process_ir_data(tt, urb->transfer_buffer);
|
|
break;
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
usb_unlink_urb(urb);
|
|
return;
|
|
case -EPIPE:
|
|
default:
|
|
dev_dbg(tt->dev, "Error: urb status = %d\n", urb->status);
|
|
break;
|
|
}
|
|
|
|
rc = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (rc && rc != -ENODEV)
|
|
dev_warn(tt->dev, "failed to resubmit urb: %d\n", rc);
|
|
}
|
|
|
|
static int ttusbir_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct ttusbir *tt;
|
|
struct usb_interface_descriptor *idesc;
|
|
struct usb_endpoint_descriptor *desc;
|
|
struct rc_dev *rc;
|
|
int i, j, ret;
|
|
int altsetting = -1;
|
|
|
|
tt = kzalloc(sizeof(*tt), GFP_KERNEL);
|
|
rc = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!tt || !rc) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/* find the correct alt setting */
|
|
for (i = 0; i < intf->num_altsetting && altsetting == -1; i++) {
|
|
int max_packet, bulk_out_endp = -1, iso_in_endp = -1;
|
|
|
|
idesc = &intf->altsetting[i].desc;
|
|
|
|
for (j = 0; j < idesc->bNumEndpoints; j++) {
|
|
desc = &intf->altsetting[i].endpoint[j].desc;
|
|
max_packet = le16_to_cpu(desc->wMaxPacketSize);
|
|
if (usb_endpoint_dir_in(desc) &&
|
|
usb_endpoint_xfer_isoc(desc) &&
|
|
max_packet == 0x10)
|
|
iso_in_endp = j;
|
|
else if (usb_endpoint_dir_out(desc) &&
|
|
usb_endpoint_xfer_bulk(desc) &&
|
|
max_packet == 0x20)
|
|
bulk_out_endp = j;
|
|
|
|
if (bulk_out_endp != -1 && iso_in_endp != -1) {
|
|
tt->bulk_out_endp = bulk_out_endp;
|
|
tt->iso_in_endp = iso_in_endp;
|
|
altsetting = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (altsetting == -1) {
|
|
dev_err(&intf->dev, "cannot find expected altsetting\n");
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
tt->dev = &intf->dev;
|
|
tt->udev = interface_to_usbdev(intf);
|
|
tt->rc = rc;
|
|
|
|
ret = usb_set_interface(tt->udev, 0, altsetting);
|
|
if (ret)
|
|
goto out;
|
|
|
|
for (i = 0; i < NUM_URBS; i++) {
|
|
struct urb *urb = usb_alloc_urb(8, GFP_KERNEL);
|
|
void *buffer;
|
|
|
|
if (!urb) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
urb->dev = tt->udev;
|
|
urb->context = tt;
|
|
urb->pipe = usb_rcvisocpipe(tt->udev, tt->iso_in_endp);
|
|
urb->interval = 1;
|
|
buffer = usb_alloc_coherent(tt->udev, 128, GFP_KERNEL,
|
|
&urb->transfer_dma);
|
|
if (!buffer) {
|
|
usb_free_urb(urb);
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP | URB_ISO_ASAP;
|
|
urb->transfer_buffer = buffer;
|
|
urb->complete = ttusbir_urb_complete;
|
|
urb->number_of_packets = 8;
|
|
urb->transfer_buffer_length = 128;
|
|
|
|
for (j = 0; j < 8; j++) {
|
|
urb->iso_frame_desc[j].offset = j * 16;
|
|
urb->iso_frame_desc[j].length = 16;
|
|
}
|
|
|
|
tt->urb[i] = urb;
|
|
}
|
|
|
|
tt->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!tt->bulk_urb) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
tt->bulk_buffer[0] = 0xaa;
|
|
tt->bulk_buffer[1] = 0x01;
|
|
tt->bulk_buffer[2] = 0x05;
|
|
tt->bulk_buffer[3] = 0x01;
|
|
|
|
usb_fill_bulk_urb(tt->bulk_urb, tt->udev, usb_sndbulkpipe(tt->udev,
|
|
tt->bulk_out_endp), tt->bulk_buffer, sizeof(tt->bulk_buffer),
|
|
ttusbir_bulk_complete, tt);
|
|
|
|
tt->led.name = "ttusbir:green:power";
|
|
tt->led.default_trigger = "rc-feedback";
|
|
tt->led.brightness_set = ttusbir_brightness_set;
|
|
tt->led.brightness_get = ttusbir_brightness_get;
|
|
tt->is_led_on = tt->led_on = true;
|
|
atomic_set(&tt->led_complete, 0);
|
|
ret = led_classdev_register(&intf->dev, &tt->led);
|
|
if (ret)
|
|
goto out;
|
|
|
|
usb_make_path(tt->udev, tt->phys, sizeof(tt->phys));
|
|
|
|
rc->device_name = DRIVER_DESC;
|
|
rc->input_phys = tt->phys;
|
|
usb_to_input_id(tt->udev, &rc->input_id);
|
|
rc->dev.parent = &intf->dev;
|
|
rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
rc->priv = tt;
|
|
rc->driver_name = DRIVER_NAME;
|
|
rc->map_name = RC_MAP_TT_1500;
|
|
rc->min_timeout = 1;
|
|
rc->timeout = IR_DEFAULT_TIMEOUT;
|
|
rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
|
|
|
|
/*
|
|
* The precision is US_PER_BIT, but since every 8th bit can be
|
|
* overwritten with garbage the accuracy is at best 2 * US_PER_BIT.
|
|
*/
|
|
rc->rx_resolution = 2 * US_PER_BIT;
|
|
|
|
ret = rc_register_device(rc);
|
|
if (ret) {
|
|
dev_err(&intf->dev, "failed to register rc device %d\n", ret);
|
|
goto out2;
|
|
}
|
|
|
|
usb_set_intfdata(intf, tt);
|
|
|
|
for (i = 0; i < NUM_URBS; i++) {
|
|
ret = usb_submit_urb(tt->urb[i], GFP_KERNEL);
|
|
if (ret) {
|
|
dev_err(tt->dev, "failed to submit urb %d\n", ret);
|
|
goto out3;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
out3:
|
|
rc_unregister_device(rc);
|
|
rc = NULL;
|
|
out2:
|
|
led_classdev_unregister(&tt->led);
|
|
out:
|
|
if (tt) {
|
|
for (i = 0; i < NUM_URBS && tt->urb[i]; i++) {
|
|
struct urb *urb = tt->urb[i];
|
|
|
|
usb_kill_urb(urb);
|
|
usb_free_coherent(tt->udev, 128, urb->transfer_buffer,
|
|
urb->transfer_dma);
|
|
usb_free_urb(urb);
|
|
}
|
|
usb_kill_urb(tt->bulk_urb);
|
|
usb_free_urb(tt->bulk_urb);
|
|
kfree(tt);
|
|
}
|
|
rc_free_device(rc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ttusbir_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct ttusbir *tt = usb_get_intfdata(intf);
|
|
struct usb_device *udev = tt->udev;
|
|
int i;
|
|
|
|
tt->udev = NULL;
|
|
|
|
rc_unregister_device(tt->rc);
|
|
led_classdev_unregister(&tt->led);
|
|
for (i = 0; i < NUM_URBS; i++) {
|
|
usb_kill_urb(tt->urb[i]);
|
|
usb_free_coherent(udev, 128, tt->urb[i]->transfer_buffer,
|
|
tt->urb[i]->transfer_dma);
|
|
usb_free_urb(tt->urb[i]);
|
|
}
|
|
usb_kill_urb(tt->bulk_urb);
|
|
usb_free_urb(tt->bulk_urb);
|
|
usb_set_intfdata(intf, NULL);
|
|
kfree(tt);
|
|
}
|
|
|
|
static int ttusbir_suspend(struct usb_interface *intf, pm_message_t message)
|
|
{
|
|
struct ttusbir *tt = usb_get_intfdata(intf);
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_URBS; i++)
|
|
usb_kill_urb(tt->urb[i]);
|
|
|
|
led_classdev_suspend(&tt->led);
|
|
usb_kill_urb(tt->bulk_urb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ttusbir_resume(struct usb_interface *intf)
|
|
{
|
|
struct ttusbir *tt = usb_get_intfdata(intf);
|
|
int i, rc;
|
|
|
|
tt->is_led_on = true;
|
|
led_classdev_resume(&tt->led);
|
|
|
|
for (i = 0; i < NUM_URBS; i++) {
|
|
rc = usb_submit_urb(tt->urb[i], GFP_KERNEL);
|
|
if (rc) {
|
|
dev_warn(tt->dev, "failed to submit urb: %d\n", rc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static const struct usb_device_id ttusbir_table[] = {
|
|
{ USB_DEVICE(0x0b48, 0x2003) },
|
|
{ }
|
|
};
|
|
|
|
static struct usb_driver ttusbir_driver = {
|
|
.name = DRIVER_NAME,
|
|
.id_table = ttusbir_table,
|
|
.probe = ttusbir_probe,
|
|
.suspend = ttusbir_suspend,
|
|
.resume = ttusbir_resume,
|
|
.reset_resume = ttusbir_resume,
|
|
.disconnect = ttusbir_disconnect,
|
|
};
|
|
|
|
module_usb_driver(ttusbir_driver);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_AUTHOR("Sean Young <sean@mess.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(usb, ttusbir_table);
|
|
|