mirror of
https://github.com/torvalds/linux.git
synced 2024-11-05 03:21:32 +00:00
5b54814022
Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively. 0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases where its in direct proximity to one of the other values. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
3101 lines
81 KiB
C
3101 lines
81 KiB
C
/*
|
|
* drivers/net/ibm_newemac/core.c
|
|
*
|
|
* Driver for PowerPC 4xx on-chip ethernet controller.
|
|
*
|
|
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
|
|
* <benh@kernel.crashing.org>
|
|
*
|
|
* Based on the arch/ppc version of the driver:
|
|
*
|
|
* Copyright (c) 2004, 2005 Zultys Technologies.
|
|
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
|
*
|
|
* Based on original work by
|
|
* Matt Porter <mporter@kernel.crashing.org>
|
|
* (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
* Armin Kuster <akuster@mvista.com>
|
|
* Johnnie Peters <jpeters@mvista.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/sched.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/dcr.h>
|
|
#include <asm/dcr-regs.h>
|
|
|
|
#include "core.h"
|
|
|
|
/*
|
|
* Lack of dma_unmap_???? calls is intentional.
|
|
*
|
|
* API-correct usage requires additional support state information to be
|
|
* maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
|
|
* EMAC design (e.g. TX buffer passed from network stack can be split into
|
|
* several BDs, dma_map_single/dma_map_page can be used to map particular BD),
|
|
* maintaining such information will add additional overhead.
|
|
* Current DMA API implementation for 4xx processors only ensures cache coherency
|
|
* and dma_unmap_???? routines are empty and are likely to stay this way.
|
|
* I decided to omit dma_unmap_??? calls because I don't want to add additional
|
|
* complexity just for the sake of following some abstract API, when it doesn't
|
|
* add any real benefit to the driver. I understand that this decision maybe
|
|
* controversial, but I really tried to make code API-correct and efficient
|
|
* at the same time and didn't come up with code I liked :(. --ebs
|
|
*/
|
|
|
|
#define DRV_NAME "emac"
|
|
#define DRV_VERSION "3.54"
|
|
#define DRV_DESC "PPC 4xx OCP EMAC driver"
|
|
|
|
MODULE_DESCRIPTION(DRV_DESC);
|
|
MODULE_AUTHOR
|
|
("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
* PPC64 doesn't (yet) have a cacheable_memcpy
|
|
*/
|
|
#ifdef CONFIG_PPC64
|
|
#define cacheable_memcpy(d,s,n) memcpy((d),(s),(n))
|
|
#endif
|
|
|
|
/* minimum number of free TX descriptors required to wake up TX process */
|
|
#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4)
|
|
|
|
/* If packet size is less than this number, we allocate small skb and copy packet
|
|
* contents into it instead of just sending original big skb up
|
|
*/
|
|
#define EMAC_RX_COPY_THRESH CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD
|
|
|
|
/* Since multiple EMACs share MDIO lines in various ways, we need
|
|
* to avoid re-using the same PHY ID in cases where the arch didn't
|
|
* setup precise phy_map entries
|
|
*
|
|
* XXX This is something that needs to be reworked as we can have multiple
|
|
* EMAC "sets" (multiple ASICs containing several EMACs) though we can
|
|
* probably require in that case to have explicit PHY IDs in the device-tree
|
|
*/
|
|
static u32 busy_phy_map;
|
|
static DEFINE_MUTEX(emac_phy_map_lock);
|
|
|
|
/* This is the wait queue used to wait on any event related to probe, that
|
|
* is discovery of MALs, other EMACs, ZMII/RGMIIs, etc...
|
|
*/
|
|
static DECLARE_WAIT_QUEUE_HEAD(emac_probe_wait);
|
|
|
|
/* Having stable interface names is a doomed idea. However, it would be nice
|
|
* if we didn't have completely random interface names at boot too :-) It's
|
|
* just a matter of making everybody's life easier. Since we are doing
|
|
* threaded probing, it's a bit harder though. The base idea here is that
|
|
* we make up a list of all emacs in the device-tree before we register the
|
|
* driver. Every emac will then wait for the previous one in the list to
|
|
* initialize before itself. We should also keep that list ordered by
|
|
* cell_index.
|
|
* That list is only 4 entries long, meaning that additional EMACs don't
|
|
* get ordering guarantees unless EMAC_BOOT_LIST_SIZE is increased.
|
|
*/
|
|
|
|
#define EMAC_BOOT_LIST_SIZE 4
|
|
static struct device_node *emac_boot_list[EMAC_BOOT_LIST_SIZE];
|
|
|
|
/* How long should I wait for dependent devices ? */
|
|
#define EMAC_PROBE_DEP_TIMEOUT (HZ * 5)
|
|
|
|
/* I don't want to litter system log with timeout errors
|
|
* when we have brain-damaged PHY.
|
|
*/
|
|
static inline void emac_report_timeout_error(struct emac_instance *dev,
|
|
const char *error)
|
|
{
|
|
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
|
|
EMAC_FTR_460EX_PHY_CLK_FIX |
|
|
EMAC_FTR_440EP_PHY_CLK_FIX))
|
|
DBG(dev, "%s" NL, error);
|
|
else if (net_ratelimit())
|
|
printk(KERN_ERR "%s: %s\n", dev->ofdev->node->full_name, error);
|
|
}
|
|
|
|
/* EMAC PHY clock workaround:
|
|
* 440EP/440GR has more sane SDR0_MFR register implementation than 440GX,
|
|
* which allows controlling each EMAC clock
|
|
*/
|
|
static inline void emac_rx_clk_tx(struct emac_instance *dev)
|
|
{
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
|
|
dcri_clrset(SDR0, SDR0_MFR,
|
|
0, SDR0_MFR_ECS >> dev->cell_index);
|
|
#endif
|
|
}
|
|
|
|
static inline void emac_rx_clk_default(struct emac_instance *dev)
|
|
{
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
|
|
dcri_clrset(SDR0, SDR0_MFR,
|
|
SDR0_MFR_ECS >> dev->cell_index, 0);
|
|
#endif
|
|
}
|
|
|
|
/* PHY polling intervals */
|
|
#define PHY_POLL_LINK_ON HZ
|
|
#define PHY_POLL_LINK_OFF (HZ / 5)
|
|
|
|
/* Graceful stop timeouts in us.
|
|
* We should allow up to 1 frame time (full-duplex, ignoring collisions)
|
|
*/
|
|
#define STOP_TIMEOUT_10 1230
|
|
#define STOP_TIMEOUT_100 124
|
|
#define STOP_TIMEOUT_1000 13
|
|
#define STOP_TIMEOUT_1000_JUMBO 73
|
|
|
|
static unsigned char default_mcast_addr[] = {
|
|
0x01, 0x80, 0xC2, 0x00, 0x00, 0x01
|
|
};
|
|
|
|
/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
|
|
static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
|
|
"rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
|
|
"tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
|
|
"rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
|
|
"rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
|
|
"rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
|
|
"rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
|
|
"rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
|
|
"rx_bad_packet", "rx_runt_packet", "rx_short_event",
|
|
"rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
|
|
"rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
|
|
"tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
|
|
"tx_bd_excessive_collisions", "tx_bd_late_collision",
|
|
"tx_bd_multple_collisions", "tx_bd_single_collision",
|
|
"tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
|
|
"tx_errors"
|
|
};
|
|
|
|
static irqreturn_t emac_irq(int irq, void *dev_instance);
|
|
static void emac_clean_tx_ring(struct emac_instance *dev);
|
|
static void __emac_set_multicast_list(struct emac_instance *dev);
|
|
|
|
static inline int emac_phy_supports_gige(int phy_mode)
|
|
{
|
|
return phy_mode == PHY_MODE_GMII ||
|
|
phy_mode == PHY_MODE_RGMII ||
|
|
phy_mode == PHY_MODE_SGMII ||
|
|
phy_mode == PHY_MODE_TBI ||
|
|
phy_mode == PHY_MODE_RTBI;
|
|
}
|
|
|
|
static inline int emac_phy_gpcs(int phy_mode)
|
|
{
|
|
return phy_mode == PHY_MODE_SGMII ||
|
|
phy_mode == PHY_MODE_TBI ||
|
|
phy_mode == PHY_MODE_RTBI;
|
|
}
|
|
|
|
static inline void emac_tx_enable(struct emac_instance *dev)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
u32 r;
|
|
|
|
DBG(dev, "tx_enable" NL);
|
|
|
|
r = in_be32(&p->mr0);
|
|
if (!(r & EMAC_MR0_TXE))
|
|
out_be32(&p->mr0, r | EMAC_MR0_TXE);
|
|
}
|
|
|
|
static void emac_tx_disable(struct emac_instance *dev)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
u32 r;
|
|
|
|
DBG(dev, "tx_disable" NL);
|
|
|
|
r = in_be32(&p->mr0);
|
|
if (r & EMAC_MR0_TXE) {
|
|
int n = dev->stop_timeout;
|
|
out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
|
|
while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) {
|
|
udelay(1);
|
|
--n;
|
|
}
|
|
if (unlikely(!n))
|
|
emac_report_timeout_error(dev, "TX disable timeout");
|
|
}
|
|
}
|
|
|
|
static void emac_rx_enable(struct emac_instance *dev)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
u32 r;
|
|
|
|
if (unlikely(test_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags)))
|
|
goto out;
|
|
|
|
DBG(dev, "rx_enable" NL);
|
|
|
|
r = in_be32(&p->mr0);
|
|
if (!(r & EMAC_MR0_RXE)) {
|
|
if (unlikely(!(r & EMAC_MR0_RXI))) {
|
|
/* Wait if previous async disable is still in progress */
|
|
int n = dev->stop_timeout;
|
|
while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
|
|
udelay(1);
|
|
--n;
|
|
}
|
|
if (unlikely(!n))
|
|
emac_report_timeout_error(dev,
|
|
"RX disable timeout");
|
|
}
|
|
out_be32(&p->mr0, r | EMAC_MR0_RXE);
|
|
}
|
|
out:
|
|
;
|
|
}
|
|
|
|
static void emac_rx_disable(struct emac_instance *dev)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
u32 r;
|
|
|
|
DBG(dev, "rx_disable" NL);
|
|
|
|
r = in_be32(&p->mr0);
|
|
if (r & EMAC_MR0_RXE) {
|
|
int n = dev->stop_timeout;
|
|
out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
|
|
while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
|
|
udelay(1);
|
|
--n;
|
|
}
|
|
if (unlikely(!n))
|
|
emac_report_timeout_error(dev, "RX disable timeout");
|
|
}
|
|
}
|
|
|
|
static inline void emac_netif_stop(struct emac_instance *dev)
|
|
{
|
|
netif_tx_lock_bh(dev->ndev);
|
|
netif_addr_lock(dev->ndev);
|
|
dev->no_mcast = 1;
|
|
netif_addr_unlock(dev->ndev);
|
|
netif_tx_unlock_bh(dev->ndev);
|
|
dev->ndev->trans_start = jiffies; /* prevent tx timeout */
|
|
mal_poll_disable(dev->mal, &dev->commac);
|
|
netif_tx_disable(dev->ndev);
|
|
}
|
|
|
|
static inline void emac_netif_start(struct emac_instance *dev)
|
|
{
|
|
netif_tx_lock_bh(dev->ndev);
|
|
netif_addr_lock(dev->ndev);
|
|
dev->no_mcast = 0;
|
|
if (dev->mcast_pending && netif_running(dev->ndev))
|
|
__emac_set_multicast_list(dev);
|
|
netif_addr_unlock(dev->ndev);
|
|
netif_tx_unlock_bh(dev->ndev);
|
|
|
|
netif_wake_queue(dev->ndev);
|
|
|
|
/* NOTE: unconditional netif_wake_queue is only appropriate
|
|
* so long as all callers are assured to have free tx slots
|
|
* (taken from tg3... though the case where that is wrong is
|
|
* not terribly harmful)
|
|
*/
|
|
mal_poll_enable(dev->mal, &dev->commac);
|
|
}
|
|
|
|
static inline void emac_rx_disable_async(struct emac_instance *dev)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
u32 r;
|
|
|
|
DBG(dev, "rx_disable_async" NL);
|
|
|
|
r = in_be32(&p->mr0);
|
|
if (r & EMAC_MR0_RXE)
|
|
out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
|
|
}
|
|
|
|
static int emac_reset(struct emac_instance *dev)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
int n = 20;
|
|
|
|
DBG(dev, "reset" NL);
|
|
|
|
if (!dev->reset_failed) {
|
|
/* 40x erratum suggests stopping RX channel before reset,
|
|
* we stop TX as well
|
|
*/
|
|
emac_rx_disable(dev);
|
|
emac_tx_disable(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
/* Enable internal clock source */
|
|
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
|
|
dcri_clrset(SDR0, SDR0_ETH_CFG,
|
|
0, SDR0_ETH_CFG_ECS << dev->cell_index);
|
|
#endif
|
|
|
|
out_be32(&p->mr0, EMAC_MR0_SRST);
|
|
while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
|
|
--n;
|
|
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
/* Enable external clock source */
|
|
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX))
|
|
dcri_clrset(SDR0, SDR0_ETH_CFG,
|
|
SDR0_ETH_CFG_ECS << dev->cell_index, 0);
|
|
#endif
|
|
|
|
if (n) {
|
|
dev->reset_failed = 0;
|
|
return 0;
|
|
} else {
|
|
emac_report_timeout_error(dev, "reset timeout");
|
|
dev->reset_failed = 1;
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
static void emac_hash_mc(struct emac_instance *dev)
|
|
{
|
|
const int regs = EMAC_XAHT_REGS(dev);
|
|
u32 *gaht_base = emac_gaht_base(dev);
|
|
u32 gaht_temp[regs];
|
|
struct dev_mc_list *dmi;
|
|
int i;
|
|
|
|
DBG(dev, "hash_mc %d" NL, dev->ndev->mc_count);
|
|
|
|
memset(gaht_temp, 0, sizeof (gaht_temp));
|
|
|
|
for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
|
|
int slot, reg, mask;
|
|
DBG2(dev, "mc %pM" NL, dmi->dmi_addr);
|
|
|
|
slot = EMAC_XAHT_CRC_TO_SLOT(dev, ether_crc(ETH_ALEN, dmi->dmi_addr));
|
|
reg = EMAC_XAHT_SLOT_TO_REG(dev, slot);
|
|
mask = EMAC_XAHT_SLOT_TO_MASK(dev, slot);
|
|
|
|
gaht_temp[reg] |= mask;
|
|
}
|
|
|
|
for (i = 0; i < regs; i++)
|
|
out_be32(gaht_base + i, gaht_temp[i]);
|
|
}
|
|
|
|
static inline u32 emac_iff2rmr(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
u32 r;
|
|
|
|
r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE;
|
|
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
r |= EMAC4_RMR_BASE;
|
|
else
|
|
r |= EMAC_RMR_BASE;
|
|
|
|
if (ndev->flags & IFF_PROMISC)
|
|
r |= EMAC_RMR_PME;
|
|
else if (ndev->flags & IFF_ALLMULTI ||
|
|
(ndev->mc_count > EMAC_XAHT_SLOTS(dev)))
|
|
r |= EMAC_RMR_PMME;
|
|
else if (ndev->mc_count > 0)
|
|
r |= EMAC_RMR_MAE;
|
|
|
|
return r;
|
|
}
|
|
|
|
static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size)
|
|
{
|
|
u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC_MR1_TR0_MULT;
|
|
|
|
DBG2(dev, "__emac_calc_base_mr1" NL);
|
|
|
|
switch(tx_size) {
|
|
case 2048:
|
|
ret |= EMAC_MR1_TFS_2K;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
|
|
dev->ndev->name, tx_size);
|
|
}
|
|
|
|
switch(rx_size) {
|
|
case 16384:
|
|
ret |= EMAC_MR1_RFS_16K;
|
|
break;
|
|
case 4096:
|
|
ret |= EMAC_MR1_RFS_4K;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
|
|
dev->ndev->name, rx_size);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size)
|
|
{
|
|
u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC4_MR1_TR |
|
|
EMAC4_MR1_OBCI(dev->opb_bus_freq / 1000000);
|
|
|
|
DBG2(dev, "__emac4_calc_base_mr1" NL);
|
|
|
|
switch(tx_size) {
|
|
case 4096:
|
|
ret |= EMAC4_MR1_TFS_4K;
|
|
break;
|
|
case 2048:
|
|
ret |= EMAC4_MR1_TFS_2K;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
|
|
dev->ndev->name, tx_size);
|
|
}
|
|
|
|
switch(rx_size) {
|
|
case 16384:
|
|
ret |= EMAC4_MR1_RFS_16K;
|
|
break;
|
|
case 4096:
|
|
ret |= EMAC4_MR1_RFS_4K;
|
|
break;
|
|
case 2048:
|
|
ret |= EMAC4_MR1_RFS_2K;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
|
|
dev->ndev->name, rx_size);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size)
|
|
{
|
|
return emac_has_feature(dev, EMAC_FTR_EMAC4) ?
|
|
__emac4_calc_base_mr1(dev, tx_size, rx_size) :
|
|
__emac_calc_base_mr1(dev, tx_size, rx_size);
|
|
}
|
|
|
|
static inline u32 emac_calc_trtr(struct emac_instance *dev, unsigned int size)
|
|
{
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
return ((size >> 6) - 1) << EMAC_TRTR_SHIFT_EMAC4;
|
|
else
|
|
return ((size >> 6) - 1) << EMAC_TRTR_SHIFT;
|
|
}
|
|
|
|
static inline u32 emac_calc_rwmr(struct emac_instance *dev,
|
|
unsigned int low, unsigned int high)
|
|
{
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
return (low << 22) | ( (high & 0x3ff) << 6);
|
|
else
|
|
return (low << 23) | ( (high & 0x1ff) << 7);
|
|
}
|
|
|
|
static int emac_configure(struct emac_instance *dev)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
struct net_device *ndev = dev->ndev;
|
|
int tx_size, rx_size, link = netif_carrier_ok(dev->ndev);
|
|
u32 r, mr1 = 0;
|
|
|
|
DBG(dev, "configure" NL);
|
|
|
|
if (!link) {
|
|
out_be32(&p->mr1, in_be32(&p->mr1)
|
|
| EMAC_MR1_FDE | EMAC_MR1_ILE);
|
|
udelay(100);
|
|
} else if (emac_reset(dev) < 0)
|
|
return -ETIMEDOUT;
|
|
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
|
|
tah_reset(dev->tah_dev);
|
|
|
|
DBG(dev, " link = %d duplex = %d, pause = %d, asym_pause = %d\n",
|
|
link, dev->phy.duplex, dev->phy.pause, dev->phy.asym_pause);
|
|
|
|
/* Default fifo sizes */
|
|
tx_size = dev->tx_fifo_size;
|
|
rx_size = dev->rx_fifo_size;
|
|
|
|
/* No link, force loopback */
|
|
if (!link)
|
|
mr1 = EMAC_MR1_FDE | EMAC_MR1_ILE;
|
|
|
|
/* Check for full duplex */
|
|
else if (dev->phy.duplex == DUPLEX_FULL)
|
|
mr1 |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001;
|
|
|
|
/* Adjust fifo sizes, mr1 and timeouts based on link speed */
|
|
dev->stop_timeout = STOP_TIMEOUT_10;
|
|
switch (dev->phy.speed) {
|
|
case SPEED_1000:
|
|
if (emac_phy_gpcs(dev->phy.mode)) {
|
|
mr1 |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_MF_IPPA(
|
|
(dev->phy.gpcs_address != 0xffffffff) ?
|
|
dev->phy.gpcs_address : dev->phy.address);
|
|
|
|
/* Put some arbitrary OUI, Manuf & Rev IDs so we can
|
|
* identify this GPCS PHY later.
|
|
*/
|
|
out_be32(&p->u1.emac4.ipcr, 0xdeadbeef);
|
|
} else
|
|
mr1 |= EMAC_MR1_MF_1000;
|
|
|
|
/* Extended fifo sizes */
|
|
tx_size = dev->tx_fifo_size_gige;
|
|
rx_size = dev->rx_fifo_size_gige;
|
|
|
|
if (dev->ndev->mtu > ETH_DATA_LEN) {
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
mr1 |= EMAC4_MR1_JPSM;
|
|
else
|
|
mr1 |= EMAC_MR1_JPSM;
|
|
dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO;
|
|
} else
|
|
dev->stop_timeout = STOP_TIMEOUT_1000;
|
|
break;
|
|
case SPEED_100:
|
|
mr1 |= EMAC_MR1_MF_100;
|
|
dev->stop_timeout = STOP_TIMEOUT_100;
|
|
break;
|
|
default: /* make gcc happy */
|
|
break;
|
|
}
|
|
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
|
|
rgmii_set_speed(dev->rgmii_dev, dev->rgmii_port,
|
|
dev->phy.speed);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
|
|
zmii_set_speed(dev->zmii_dev, dev->zmii_port, dev->phy.speed);
|
|
|
|
/* on 40x erratum forces us to NOT use integrated flow control,
|
|
* let's hope it works on 44x ;)
|
|
*/
|
|
if (!emac_has_feature(dev, EMAC_FTR_NO_FLOW_CONTROL_40x) &&
|
|
dev->phy.duplex == DUPLEX_FULL) {
|
|
if (dev->phy.pause)
|
|
mr1 |= EMAC_MR1_EIFC | EMAC_MR1_APP;
|
|
else if (dev->phy.asym_pause)
|
|
mr1 |= EMAC_MR1_APP;
|
|
}
|
|
|
|
/* Add base settings & fifo sizes & program MR1 */
|
|
mr1 |= emac_calc_base_mr1(dev, tx_size, rx_size);
|
|
out_be32(&p->mr1, mr1);
|
|
|
|
/* Set individual MAC address */
|
|
out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]);
|
|
out_be32(&p->ialr, (ndev->dev_addr[2] << 24) |
|
|
(ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) |
|
|
ndev->dev_addr[5]);
|
|
|
|
/* VLAN Tag Protocol ID */
|
|
out_be32(&p->vtpid, 0x8100);
|
|
|
|
/* Receive mode register */
|
|
r = emac_iff2rmr(ndev);
|
|
if (r & EMAC_RMR_MAE)
|
|
emac_hash_mc(dev);
|
|
out_be32(&p->rmr, r);
|
|
|
|
/* FIFOs thresholds */
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
r = EMAC4_TMR1((dev->mal_burst_size / dev->fifo_entry_size) + 1,
|
|
tx_size / 2 / dev->fifo_entry_size);
|
|
else
|
|
r = EMAC_TMR1((dev->mal_burst_size / dev->fifo_entry_size) + 1,
|
|
tx_size / 2 / dev->fifo_entry_size);
|
|
out_be32(&p->tmr1, r);
|
|
out_be32(&p->trtr, emac_calc_trtr(dev, tx_size / 2));
|
|
|
|
/* PAUSE frame is sent when RX FIFO reaches its high-water mark,
|
|
there should be still enough space in FIFO to allow the our link
|
|
partner time to process this frame and also time to send PAUSE
|
|
frame itself.
|
|
|
|
Here is the worst case scenario for the RX FIFO "headroom"
|
|
(from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
|
|
|
|
1) One maximum-length frame on TX 1522 bytes
|
|
2) One PAUSE frame time 64 bytes
|
|
3) PAUSE frame decode time allowance 64 bytes
|
|
4) One maximum-length frame on RX 1522 bytes
|
|
5) Round-trip propagation delay of the link (100Mb) 15 bytes
|
|
----------
|
|
3187 bytes
|
|
|
|
I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
|
|
low-water mark to RX_FIFO_SIZE / 8 (512 bytes)
|
|
*/
|
|
r = emac_calc_rwmr(dev, rx_size / 8 / dev->fifo_entry_size,
|
|
rx_size / 4 / dev->fifo_entry_size);
|
|
out_be32(&p->rwmr, r);
|
|
|
|
/* Set PAUSE timer to the maximum */
|
|
out_be32(&p->ptr, 0xffff);
|
|
|
|
/* IRQ sources */
|
|
r = EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE |
|
|
EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE |
|
|
EMAC_ISR_IRE | EMAC_ISR_TE;
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
r |= EMAC4_ISR_TXPE | EMAC4_ISR_RXPE /* | EMAC4_ISR_TXUE |
|
|
EMAC4_ISR_RXOE | */;
|
|
out_be32(&p->iser, r);
|
|
|
|
/* We need to take GPCS PHY out of isolate mode after EMAC reset */
|
|
if (emac_phy_gpcs(dev->phy.mode)) {
|
|
if (dev->phy.gpcs_address != 0xffffffff)
|
|
emac_mii_reset_gpcs(&dev->phy);
|
|
else
|
|
emac_mii_reset_phy(&dev->phy);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void emac_reinitialize(struct emac_instance *dev)
|
|
{
|
|
DBG(dev, "reinitialize" NL);
|
|
|
|
emac_netif_stop(dev);
|
|
if (!emac_configure(dev)) {
|
|
emac_tx_enable(dev);
|
|
emac_rx_enable(dev);
|
|
}
|
|
emac_netif_start(dev);
|
|
}
|
|
|
|
static void emac_full_tx_reset(struct emac_instance *dev)
|
|
{
|
|
DBG(dev, "full_tx_reset" NL);
|
|
|
|
emac_tx_disable(dev);
|
|
mal_disable_tx_channel(dev->mal, dev->mal_tx_chan);
|
|
emac_clean_tx_ring(dev);
|
|
dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0;
|
|
|
|
emac_configure(dev);
|
|
|
|
mal_enable_tx_channel(dev->mal, dev->mal_tx_chan);
|
|
emac_tx_enable(dev);
|
|
emac_rx_enable(dev);
|
|
}
|
|
|
|
static void emac_reset_work(struct work_struct *work)
|
|
{
|
|
struct emac_instance *dev = container_of(work, struct emac_instance, reset_work);
|
|
|
|
DBG(dev, "reset_work" NL);
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
if (dev->opened) {
|
|
emac_netif_stop(dev);
|
|
emac_full_tx_reset(dev);
|
|
emac_netif_start(dev);
|
|
}
|
|
mutex_unlock(&dev->link_lock);
|
|
}
|
|
|
|
static void emac_tx_timeout(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
DBG(dev, "tx_timeout" NL);
|
|
|
|
schedule_work(&dev->reset_work);
|
|
}
|
|
|
|
|
|
static inline int emac_phy_done(struct emac_instance *dev, u32 stacr)
|
|
{
|
|
int done = !!(stacr & EMAC_STACR_OC);
|
|
|
|
if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT))
|
|
done = !done;
|
|
|
|
return done;
|
|
};
|
|
|
|
static int __emac_mdio_read(struct emac_instance *dev, u8 id, u8 reg)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
u32 r = 0;
|
|
int n, err = -ETIMEDOUT;
|
|
|
|
mutex_lock(&dev->mdio_lock);
|
|
|
|
DBG2(dev, "mdio_read(%02x,%02x)" NL, id, reg);
|
|
|
|
/* Enable proper MDIO port */
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
|
|
zmii_get_mdio(dev->zmii_dev, dev->zmii_port);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
|
|
rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port);
|
|
|
|
/* Wait for management interface to become idle */
|
|
n = 20;
|
|
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
|
|
udelay(1);
|
|
if (!--n) {
|
|
DBG2(dev, " -> timeout wait idle\n");
|
|
goto bail;
|
|
}
|
|
}
|
|
|
|
/* Issue read command */
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
r = EMAC4_STACR_BASE(dev->opb_bus_freq);
|
|
else
|
|
r = EMAC_STACR_BASE(dev->opb_bus_freq);
|
|
if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT))
|
|
r |= EMAC_STACR_OC;
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_NEW_STACR))
|
|
r |= EMACX_STACR_STAC_READ;
|
|
else
|
|
r |= EMAC_STACR_STAC_READ;
|
|
r |= (reg & EMAC_STACR_PRA_MASK)
|
|
| ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT);
|
|
out_be32(&p->stacr, r);
|
|
|
|
/* Wait for read to complete */
|
|
n = 200;
|
|
while (!emac_phy_done(dev, (r = in_be32(&p->stacr)))) {
|
|
udelay(1);
|
|
if (!--n) {
|
|
DBG2(dev, " -> timeout wait complete\n");
|
|
goto bail;
|
|
}
|
|
}
|
|
|
|
if (unlikely(r & EMAC_STACR_PHYE)) {
|
|
DBG(dev, "mdio_read(%02x, %02x) failed" NL, id, reg);
|
|
err = -EREMOTEIO;
|
|
goto bail;
|
|
}
|
|
|
|
r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK);
|
|
|
|
DBG2(dev, "mdio_read -> %04x" NL, r);
|
|
err = 0;
|
|
bail:
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
|
|
rgmii_put_mdio(dev->rgmii_dev, dev->rgmii_port);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
|
|
zmii_put_mdio(dev->zmii_dev, dev->zmii_port);
|
|
mutex_unlock(&dev->mdio_lock);
|
|
|
|
return err == 0 ? r : err;
|
|
}
|
|
|
|
static void __emac_mdio_write(struct emac_instance *dev, u8 id, u8 reg,
|
|
u16 val)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
u32 r = 0;
|
|
int n, err = -ETIMEDOUT;
|
|
|
|
mutex_lock(&dev->mdio_lock);
|
|
|
|
DBG2(dev, "mdio_write(%02x,%02x,%04x)" NL, id, reg, val);
|
|
|
|
/* Enable proper MDIO port */
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
|
|
zmii_get_mdio(dev->zmii_dev, dev->zmii_port);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
|
|
rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port);
|
|
|
|
/* Wait for management interface to be idle */
|
|
n = 20;
|
|
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
|
|
udelay(1);
|
|
if (!--n) {
|
|
DBG2(dev, " -> timeout wait idle\n");
|
|
goto bail;
|
|
}
|
|
}
|
|
|
|
/* Issue write command */
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
r = EMAC4_STACR_BASE(dev->opb_bus_freq);
|
|
else
|
|
r = EMAC_STACR_BASE(dev->opb_bus_freq);
|
|
if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT))
|
|
r |= EMAC_STACR_OC;
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_NEW_STACR))
|
|
r |= EMACX_STACR_STAC_WRITE;
|
|
else
|
|
r |= EMAC_STACR_STAC_WRITE;
|
|
r |= (reg & EMAC_STACR_PRA_MASK) |
|
|
((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
|
|
(val << EMAC_STACR_PHYD_SHIFT);
|
|
out_be32(&p->stacr, r);
|
|
|
|
/* Wait for write to complete */
|
|
n = 200;
|
|
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
|
|
udelay(1);
|
|
if (!--n) {
|
|
DBG2(dev, " -> timeout wait complete\n");
|
|
goto bail;
|
|
}
|
|
}
|
|
err = 0;
|
|
bail:
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
|
|
rgmii_put_mdio(dev->rgmii_dev, dev->rgmii_port);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
|
|
zmii_put_mdio(dev->zmii_dev, dev->zmii_port);
|
|
mutex_unlock(&dev->mdio_lock);
|
|
}
|
|
|
|
static int emac_mdio_read(struct net_device *ndev, int id, int reg)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
int res;
|
|
|
|
res = __emac_mdio_read((dev->mdio_instance &&
|
|
dev->phy.gpcs_address != id) ?
|
|
dev->mdio_instance : dev,
|
|
(u8) id, (u8) reg);
|
|
return res;
|
|
}
|
|
|
|
static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
__emac_mdio_write((dev->mdio_instance &&
|
|
dev->phy.gpcs_address != id) ?
|
|
dev->mdio_instance : dev,
|
|
(u8) id, (u8) reg, (u16) val);
|
|
}
|
|
|
|
/* Tx lock BH */
|
|
static void __emac_set_multicast_list(struct emac_instance *dev)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
u32 rmr = emac_iff2rmr(dev->ndev);
|
|
|
|
DBG(dev, "__multicast %08x" NL, rmr);
|
|
|
|
/* I decided to relax register access rules here to avoid
|
|
* full EMAC reset.
|
|
*
|
|
* There is a real problem with EMAC4 core if we use MWSW_001 bit
|
|
* in MR1 register and do a full EMAC reset.
|
|
* One TX BD status update is delayed and, after EMAC reset, it
|
|
* never happens, resulting in TX hung (it'll be recovered by TX
|
|
* timeout handler eventually, but this is just gross).
|
|
* So we either have to do full TX reset or try to cheat here :)
|
|
*
|
|
* The only required change is to RX mode register, so I *think* all
|
|
* we need is just to stop RX channel. This seems to work on all
|
|
* tested SoCs. --ebs
|
|
*
|
|
* If we need the full reset, we might just trigger the workqueue
|
|
* and do it async... a bit nasty but should work --BenH
|
|
*/
|
|
dev->mcast_pending = 0;
|
|
emac_rx_disable(dev);
|
|
if (rmr & EMAC_RMR_MAE)
|
|
emac_hash_mc(dev);
|
|
out_be32(&p->rmr, rmr);
|
|
emac_rx_enable(dev);
|
|
}
|
|
|
|
/* Tx lock BH */
|
|
static void emac_set_multicast_list(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
DBG(dev, "multicast" NL);
|
|
|
|
BUG_ON(!netif_running(dev->ndev));
|
|
|
|
if (dev->no_mcast) {
|
|
dev->mcast_pending = 1;
|
|
return;
|
|
}
|
|
__emac_set_multicast_list(dev);
|
|
}
|
|
|
|
static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu)
|
|
{
|
|
int rx_sync_size = emac_rx_sync_size(new_mtu);
|
|
int rx_skb_size = emac_rx_skb_size(new_mtu);
|
|
int i, ret = 0;
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
emac_netif_stop(dev);
|
|
emac_rx_disable(dev);
|
|
mal_disable_rx_channel(dev->mal, dev->mal_rx_chan);
|
|
|
|
if (dev->rx_sg_skb) {
|
|
++dev->estats.rx_dropped_resize;
|
|
dev_kfree_skb(dev->rx_sg_skb);
|
|
dev->rx_sg_skb = NULL;
|
|
}
|
|
|
|
/* Make a first pass over RX ring and mark BDs ready, dropping
|
|
* non-processed packets on the way. We need this as a separate pass
|
|
* to simplify error recovery in the case of allocation failure later.
|
|
*/
|
|
for (i = 0; i < NUM_RX_BUFF; ++i) {
|
|
if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST)
|
|
++dev->estats.rx_dropped_resize;
|
|
|
|
dev->rx_desc[i].data_len = 0;
|
|
dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY |
|
|
(i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
|
|
}
|
|
|
|
/* Reallocate RX ring only if bigger skb buffers are required */
|
|
if (rx_skb_size <= dev->rx_skb_size)
|
|
goto skip;
|
|
|
|
/* Second pass, allocate new skbs */
|
|
for (i = 0; i < NUM_RX_BUFF; ++i) {
|
|
struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
|
|
if (!skb) {
|
|
ret = -ENOMEM;
|
|
goto oom;
|
|
}
|
|
|
|
BUG_ON(!dev->rx_skb[i]);
|
|
dev_kfree_skb(dev->rx_skb[i]);
|
|
|
|
skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
|
|
dev->rx_desc[i].data_ptr =
|
|
dma_map_single(&dev->ofdev->dev, skb->data - 2, rx_sync_size,
|
|
DMA_FROM_DEVICE) + 2;
|
|
dev->rx_skb[i] = skb;
|
|
}
|
|
skip:
|
|
/* Check if we need to change "Jumbo" bit in MR1 */
|
|
if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
|
|
/* This is to prevent starting RX channel in emac_rx_enable() */
|
|
set_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags);
|
|
|
|
dev->ndev->mtu = new_mtu;
|
|
emac_full_tx_reset(dev);
|
|
}
|
|
|
|
mal_set_rcbs(dev->mal, dev->mal_rx_chan, emac_rx_size(new_mtu));
|
|
oom:
|
|
/* Restart RX */
|
|
clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags);
|
|
dev->rx_slot = 0;
|
|
mal_enable_rx_channel(dev->mal, dev->mal_rx_chan);
|
|
emac_rx_enable(dev);
|
|
emac_netif_start(dev);
|
|
mutex_unlock(&dev->link_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Process ctx, rtnl_lock semaphore */
|
|
static int emac_change_mtu(struct net_device *ndev, int new_mtu)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
int ret = 0;
|
|
|
|
if (new_mtu < EMAC_MIN_MTU || new_mtu > dev->max_mtu)
|
|
return -EINVAL;
|
|
|
|
DBG(dev, "change_mtu(%d)" NL, new_mtu);
|
|
|
|
if (netif_running(ndev)) {
|
|
/* Check if we really need to reinitalize RX ring */
|
|
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
|
|
ret = emac_resize_rx_ring(dev, new_mtu);
|
|
}
|
|
|
|
if (!ret) {
|
|
ndev->mtu = new_mtu;
|
|
dev->rx_skb_size = emac_rx_skb_size(new_mtu);
|
|
dev->rx_sync_size = emac_rx_sync_size(new_mtu);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void emac_clean_tx_ring(struct emac_instance *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_TX_BUFF; ++i) {
|
|
if (dev->tx_skb[i]) {
|
|
dev_kfree_skb(dev->tx_skb[i]);
|
|
dev->tx_skb[i] = NULL;
|
|
if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY)
|
|
++dev->estats.tx_dropped;
|
|
}
|
|
dev->tx_desc[i].ctrl = 0;
|
|
dev->tx_desc[i].data_ptr = 0;
|
|
}
|
|
}
|
|
|
|
static void emac_clean_rx_ring(struct emac_instance *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_RX_BUFF; ++i)
|
|
if (dev->rx_skb[i]) {
|
|
dev->rx_desc[i].ctrl = 0;
|
|
dev_kfree_skb(dev->rx_skb[i]);
|
|
dev->rx_skb[i] = NULL;
|
|
dev->rx_desc[i].data_ptr = 0;
|
|
}
|
|
|
|
if (dev->rx_sg_skb) {
|
|
dev_kfree_skb(dev->rx_sg_skb);
|
|
dev->rx_sg_skb = NULL;
|
|
}
|
|
}
|
|
|
|
static inline int emac_alloc_rx_skb(struct emac_instance *dev, int slot,
|
|
gfp_t flags)
|
|
{
|
|
struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
|
|
if (unlikely(!skb))
|
|
return -ENOMEM;
|
|
|
|
dev->rx_skb[slot] = skb;
|
|
dev->rx_desc[slot].data_len = 0;
|
|
|
|
skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
|
|
dev->rx_desc[slot].data_ptr =
|
|
dma_map_single(&dev->ofdev->dev, skb->data - 2, dev->rx_sync_size,
|
|
DMA_FROM_DEVICE) + 2;
|
|
wmb();
|
|
dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
|
|
(slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void emac_print_link_status(struct emac_instance *dev)
|
|
{
|
|
if (netif_carrier_ok(dev->ndev))
|
|
printk(KERN_INFO "%s: link is up, %d %s%s\n",
|
|
dev->ndev->name, dev->phy.speed,
|
|
dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX",
|
|
dev->phy.pause ? ", pause enabled" :
|
|
dev->phy.asym_pause ? ", asymmetric pause enabled" : "");
|
|
else
|
|
printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
|
|
}
|
|
|
|
/* Process ctx, rtnl_lock semaphore */
|
|
static int emac_open(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
int err, i;
|
|
|
|
DBG(dev, "open" NL);
|
|
|
|
/* Setup error IRQ handler */
|
|
err = request_irq(dev->emac_irq, emac_irq, 0, "EMAC", dev);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to request IRQ %d\n",
|
|
ndev->name, dev->emac_irq);
|
|
return err;
|
|
}
|
|
|
|
/* Allocate RX ring */
|
|
for (i = 0; i < NUM_RX_BUFF; ++i)
|
|
if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
|
|
printk(KERN_ERR "%s: failed to allocate RX ring\n",
|
|
ndev->name);
|
|
goto oom;
|
|
}
|
|
|
|
dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = 0;
|
|
clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags);
|
|
dev->rx_sg_skb = NULL;
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
dev->opened = 1;
|
|
|
|
/* Start PHY polling now.
|
|
*/
|
|
if (dev->phy.address >= 0) {
|
|
int link_poll_interval;
|
|
if (dev->phy.def->ops->poll_link(&dev->phy)) {
|
|
dev->phy.def->ops->read_link(&dev->phy);
|
|
emac_rx_clk_default(dev);
|
|
netif_carrier_on(dev->ndev);
|
|
link_poll_interval = PHY_POLL_LINK_ON;
|
|
} else {
|
|
emac_rx_clk_tx(dev);
|
|
netif_carrier_off(dev->ndev);
|
|
link_poll_interval = PHY_POLL_LINK_OFF;
|
|
}
|
|
dev->link_polling = 1;
|
|
wmb();
|
|
schedule_delayed_work(&dev->link_work, link_poll_interval);
|
|
emac_print_link_status(dev);
|
|
} else
|
|
netif_carrier_on(dev->ndev);
|
|
|
|
/* Required for Pause packet support in EMAC */
|
|
dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
|
|
|
|
emac_configure(dev);
|
|
mal_poll_add(dev->mal, &dev->commac);
|
|
mal_enable_tx_channel(dev->mal, dev->mal_tx_chan);
|
|
mal_set_rcbs(dev->mal, dev->mal_rx_chan, emac_rx_size(ndev->mtu));
|
|
mal_enable_rx_channel(dev->mal, dev->mal_rx_chan);
|
|
emac_tx_enable(dev);
|
|
emac_rx_enable(dev);
|
|
emac_netif_start(dev);
|
|
|
|
mutex_unlock(&dev->link_lock);
|
|
|
|
return 0;
|
|
oom:
|
|
emac_clean_rx_ring(dev);
|
|
free_irq(dev->emac_irq, dev);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* BHs disabled */
|
|
#if 0
|
|
static int emac_link_differs(struct emac_instance *dev)
|
|
{
|
|
u32 r = in_be32(&dev->emacp->mr1);
|
|
|
|
int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF;
|
|
int speed, pause, asym_pause;
|
|
|
|
if (r & EMAC_MR1_MF_1000)
|
|
speed = SPEED_1000;
|
|
else if (r & EMAC_MR1_MF_100)
|
|
speed = SPEED_100;
|
|
else
|
|
speed = SPEED_10;
|
|
|
|
switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) {
|
|
case (EMAC_MR1_EIFC | EMAC_MR1_APP):
|
|
pause = 1;
|
|
asym_pause = 0;
|
|
break;
|
|
case EMAC_MR1_APP:
|
|
pause = 0;
|
|
asym_pause = 1;
|
|
break;
|
|
default:
|
|
pause = asym_pause = 0;
|
|
}
|
|
return speed != dev->phy.speed || duplex != dev->phy.duplex ||
|
|
pause != dev->phy.pause || asym_pause != dev->phy.asym_pause;
|
|
}
|
|
#endif
|
|
|
|
static void emac_link_timer(struct work_struct *work)
|
|
{
|
|
struct emac_instance *dev =
|
|
container_of(to_delayed_work(work),
|
|
struct emac_instance, link_work);
|
|
int link_poll_interval;
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
DBG2(dev, "link timer" NL);
|
|
|
|
if (!dev->opened)
|
|
goto bail;
|
|
|
|
if (dev->phy.def->ops->poll_link(&dev->phy)) {
|
|
if (!netif_carrier_ok(dev->ndev)) {
|
|
emac_rx_clk_default(dev);
|
|
/* Get new link parameters */
|
|
dev->phy.def->ops->read_link(&dev->phy);
|
|
|
|
netif_carrier_on(dev->ndev);
|
|
emac_netif_stop(dev);
|
|
emac_full_tx_reset(dev);
|
|
emac_netif_start(dev);
|
|
emac_print_link_status(dev);
|
|
}
|
|
link_poll_interval = PHY_POLL_LINK_ON;
|
|
} else {
|
|
if (netif_carrier_ok(dev->ndev)) {
|
|
emac_rx_clk_tx(dev);
|
|
netif_carrier_off(dev->ndev);
|
|
netif_tx_disable(dev->ndev);
|
|
emac_reinitialize(dev);
|
|
emac_print_link_status(dev);
|
|
}
|
|
link_poll_interval = PHY_POLL_LINK_OFF;
|
|
}
|
|
schedule_delayed_work(&dev->link_work, link_poll_interval);
|
|
bail:
|
|
mutex_unlock(&dev->link_lock);
|
|
}
|
|
|
|
static void emac_force_link_update(struct emac_instance *dev)
|
|
{
|
|
netif_carrier_off(dev->ndev);
|
|
smp_rmb();
|
|
if (dev->link_polling) {
|
|
cancel_rearming_delayed_work(&dev->link_work);
|
|
if (dev->link_polling)
|
|
schedule_delayed_work(&dev->link_work, PHY_POLL_LINK_OFF);
|
|
}
|
|
}
|
|
|
|
/* Process ctx, rtnl_lock semaphore */
|
|
static int emac_close(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
DBG(dev, "close" NL);
|
|
|
|
if (dev->phy.address >= 0) {
|
|
dev->link_polling = 0;
|
|
cancel_rearming_delayed_work(&dev->link_work);
|
|
}
|
|
mutex_lock(&dev->link_lock);
|
|
emac_netif_stop(dev);
|
|
dev->opened = 0;
|
|
mutex_unlock(&dev->link_lock);
|
|
|
|
emac_rx_disable(dev);
|
|
emac_tx_disable(dev);
|
|
mal_disable_rx_channel(dev->mal, dev->mal_rx_chan);
|
|
mal_disable_tx_channel(dev->mal, dev->mal_tx_chan);
|
|
mal_poll_del(dev->mal, &dev->commac);
|
|
|
|
emac_clean_tx_ring(dev);
|
|
emac_clean_rx_ring(dev);
|
|
|
|
free_irq(dev->emac_irq, dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u16 emac_tx_csum(struct emac_instance *dev,
|
|
struct sk_buff *skb)
|
|
{
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) &&
|
|
(skb->ip_summed == CHECKSUM_PARTIAL)) {
|
|
++dev->stats.tx_packets_csum;
|
|
return EMAC_TX_CTRL_TAH_CSUM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline int emac_xmit_finish(struct emac_instance *dev, int len)
|
|
{
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
struct net_device *ndev = dev->ndev;
|
|
|
|
/* Send the packet out. If the if makes a significant perf
|
|
* difference, then we can store the TMR0 value in "dev"
|
|
* instead
|
|
*/
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
out_be32(&p->tmr0, EMAC4_TMR0_XMIT);
|
|
else
|
|
out_be32(&p->tmr0, EMAC_TMR0_XMIT);
|
|
|
|
if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) {
|
|
netif_stop_queue(ndev);
|
|
DBG2(dev, "stopped TX queue" NL);
|
|
}
|
|
|
|
ndev->trans_start = jiffies;
|
|
++dev->stats.tx_packets;
|
|
dev->stats.tx_bytes += len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Tx lock BH */
|
|
static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
unsigned int len = skb->len;
|
|
int slot;
|
|
|
|
u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
|
|
MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb);
|
|
|
|
slot = dev->tx_slot++;
|
|
if (dev->tx_slot == NUM_TX_BUFF) {
|
|
dev->tx_slot = 0;
|
|
ctrl |= MAL_TX_CTRL_WRAP;
|
|
}
|
|
|
|
DBG2(dev, "xmit(%u) %d" NL, len, slot);
|
|
|
|
dev->tx_skb[slot] = skb;
|
|
dev->tx_desc[slot].data_ptr = dma_map_single(&dev->ofdev->dev,
|
|
skb->data, len,
|
|
DMA_TO_DEVICE);
|
|
dev->tx_desc[slot].data_len = (u16) len;
|
|
wmb();
|
|
dev->tx_desc[slot].ctrl = ctrl;
|
|
|
|
return emac_xmit_finish(dev, len);
|
|
}
|
|
|
|
static inline int emac_xmit_split(struct emac_instance *dev, int slot,
|
|
u32 pd, int len, int last, u16 base_ctrl)
|
|
{
|
|
while (1) {
|
|
u16 ctrl = base_ctrl;
|
|
int chunk = min(len, MAL_MAX_TX_SIZE);
|
|
len -= chunk;
|
|
|
|
slot = (slot + 1) % NUM_TX_BUFF;
|
|
|
|
if (last && !len)
|
|
ctrl |= MAL_TX_CTRL_LAST;
|
|
if (slot == NUM_TX_BUFF - 1)
|
|
ctrl |= MAL_TX_CTRL_WRAP;
|
|
|
|
dev->tx_skb[slot] = NULL;
|
|
dev->tx_desc[slot].data_ptr = pd;
|
|
dev->tx_desc[slot].data_len = (u16) chunk;
|
|
dev->tx_desc[slot].ctrl = ctrl;
|
|
++dev->tx_cnt;
|
|
|
|
if (!len)
|
|
break;
|
|
|
|
pd += chunk;
|
|
}
|
|
return slot;
|
|
}
|
|
|
|
/* Tx lock BH disabled (SG version for TAH equipped EMACs) */
|
|
static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
int nr_frags = skb_shinfo(skb)->nr_frags;
|
|
int len = skb->len, chunk;
|
|
int slot, i;
|
|
u16 ctrl;
|
|
u32 pd;
|
|
|
|
/* This is common "fast" path */
|
|
if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE))
|
|
return emac_start_xmit(skb, ndev);
|
|
|
|
len -= skb->data_len;
|
|
|
|
/* Note, this is only an *estimation*, we can still run out of empty
|
|
* slots because of the additional fragmentation into
|
|
* MAL_MAX_TX_SIZE-sized chunks
|
|
*/
|
|
if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF))
|
|
goto stop_queue;
|
|
|
|
ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
|
|
emac_tx_csum(dev, skb);
|
|
slot = dev->tx_slot;
|
|
|
|
/* skb data */
|
|
dev->tx_skb[slot] = NULL;
|
|
chunk = min(len, MAL_MAX_TX_SIZE);
|
|
dev->tx_desc[slot].data_ptr = pd =
|
|
dma_map_single(&dev->ofdev->dev, skb->data, len, DMA_TO_DEVICE);
|
|
dev->tx_desc[slot].data_len = (u16) chunk;
|
|
len -= chunk;
|
|
if (unlikely(len))
|
|
slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags,
|
|
ctrl);
|
|
/* skb fragments */
|
|
for (i = 0; i < nr_frags; ++i) {
|
|
struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
|
|
len = frag->size;
|
|
|
|
if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF))
|
|
goto undo_frame;
|
|
|
|
pd = dma_map_page(&dev->ofdev->dev, frag->page, frag->page_offset, len,
|
|
DMA_TO_DEVICE);
|
|
|
|
slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1,
|
|
ctrl);
|
|
}
|
|
|
|
DBG2(dev, "xmit_sg(%u) %d - %d" NL, skb->len, dev->tx_slot, slot);
|
|
|
|
/* Attach skb to the last slot so we don't release it too early */
|
|
dev->tx_skb[slot] = skb;
|
|
|
|
/* Send the packet out */
|
|
if (dev->tx_slot == NUM_TX_BUFF - 1)
|
|
ctrl |= MAL_TX_CTRL_WRAP;
|
|
wmb();
|
|
dev->tx_desc[dev->tx_slot].ctrl = ctrl;
|
|
dev->tx_slot = (slot + 1) % NUM_TX_BUFF;
|
|
|
|
return emac_xmit_finish(dev, skb->len);
|
|
|
|
undo_frame:
|
|
/* Well, too bad. Our previous estimation was overly optimistic.
|
|
* Undo everything.
|
|
*/
|
|
while (slot != dev->tx_slot) {
|
|
dev->tx_desc[slot].ctrl = 0;
|
|
--dev->tx_cnt;
|
|
if (--slot < 0)
|
|
slot = NUM_TX_BUFF - 1;
|
|
}
|
|
++dev->estats.tx_undo;
|
|
|
|
stop_queue:
|
|
netif_stop_queue(ndev);
|
|
DBG2(dev, "stopped TX queue" NL);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Tx lock BHs */
|
|
static void emac_parse_tx_error(struct emac_instance *dev, u16 ctrl)
|
|
{
|
|
struct emac_error_stats *st = &dev->estats;
|
|
|
|
DBG(dev, "BD TX error %04x" NL, ctrl);
|
|
|
|
++st->tx_bd_errors;
|
|
if (ctrl & EMAC_TX_ST_BFCS)
|
|
++st->tx_bd_bad_fcs;
|
|
if (ctrl & EMAC_TX_ST_LCS)
|
|
++st->tx_bd_carrier_loss;
|
|
if (ctrl & EMAC_TX_ST_ED)
|
|
++st->tx_bd_excessive_deferral;
|
|
if (ctrl & EMAC_TX_ST_EC)
|
|
++st->tx_bd_excessive_collisions;
|
|
if (ctrl & EMAC_TX_ST_LC)
|
|
++st->tx_bd_late_collision;
|
|
if (ctrl & EMAC_TX_ST_MC)
|
|
++st->tx_bd_multple_collisions;
|
|
if (ctrl & EMAC_TX_ST_SC)
|
|
++st->tx_bd_single_collision;
|
|
if (ctrl & EMAC_TX_ST_UR)
|
|
++st->tx_bd_underrun;
|
|
if (ctrl & EMAC_TX_ST_SQE)
|
|
++st->tx_bd_sqe;
|
|
}
|
|
|
|
static void emac_poll_tx(void *param)
|
|
{
|
|
struct emac_instance *dev = param;
|
|
u32 bad_mask;
|
|
|
|
DBG2(dev, "poll_tx, %d %d" NL, dev->tx_cnt, dev->ack_slot);
|
|
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
|
|
bad_mask = EMAC_IS_BAD_TX_TAH;
|
|
else
|
|
bad_mask = EMAC_IS_BAD_TX;
|
|
|
|
netif_tx_lock_bh(dev->ndev);
|
|
if (dev->tx_cnt) {
|
|
u16 ctrl;
|
|
int slot = dev->ack_slot, n = 0;
|
|
again:
|
|
ctrl = dev->tx_desc[slot].ctrl;
|
|
if (!(ctrl & MAL_TX_CTRL_READY)) {
|
|
struct sk_buff *skb = dev->tx_skb[slot];
|
|
++n;
|
|
|
|
if (skb) {
|
|
dev_kfree_skb(skb);
|
|
dev->tx_skb[slot] = NULL;
|
|
}
|
|
slot = (slot + 1) % NUM_TX_BUFF;
|
|
|
|
if (unlikely(ctrl & bad_mask))
|
|
emac_parse_tx_error(dev, ctrl);
|
|
|
|
if (--dev->tx_cnt)
|
|
goto again;
|
|
}
|
|
if (n) {
|
|
dev->ack_slot = slot;
|
|
if (netif_queue_stopped(dev->ndev) &&
|
|
dev->tx_cnt < EMAC_TX_WAKEUP_THRESH)
|
|
netif_wake_queue(dev->ndev);
|
|
|
|
DBG2(dev, "tx %d pkts" NL, n);
|
|
}
|
|
}
|
|
netif_tx_unlock_bh(dev->ndev);
|
|
}
|
|
|
|
static inline void emac_recycle_rx_skb(struct emac_instance *dev, int slot,
|
|
int len)
|
|
{
|
|
struct sk_buff *skb = dev->rx_skb[slot];
|
|
|
|
DBG2(dev, "recycle %d %d" NL, slot, len);
|
|
|
|
if (len)
|
|
dma_map_single(&dev->ofdev->dev, skb->data - 2,
|
|
EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
|
|
|
|
dev->rx_desc[slot].data_len = 0;
|
|
wmb();
|
|
dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
|
|
(slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
|
|
}
|
|
|
|
static void emac_parse_rx_error(struct emac_instance *dev, u16 ctrl)
|
|
{
|
|
struct emac_error_stats *st = &dev->estats;
|
|
|
|
DBG(dev, "BD RX error %04x" NL, ctrl);
|
|
|
|
++st->rx_bd_errors;
|
|
if (ctrl & EMAC_RX_ST_OE)
|
|
++st->rx_bd_overrun;
|
|
if (ctrl & EMAC_RX_ST_BP)
|
|
++st->rx_bd_bad_packet;
|
|
if (ctrl & EMAC_RX_ST_RP)
|
|
++st->rx_bd_runt_packet;
|
|
if (ctrl & EMAC_RX_ST_SE)
|
|
++st->rx_bd_short_event;
|
|
if (ctrl & EMAC_RX_ST_AE)
|
|
++st->rx_bd_alignment_error;
|
|
if (ctrl & EMAC_RX_ST_BFCS)
|
|
++st->rx_bd_bad_fcs;
|
|
if (ctrl & EMAC_RX_ST_PTL)
|
|
++st->rx_bd_packet_too_long;
|
|
if (ctrl & EMAC_RX_ST_ORE)
|
|
++st->rx_bd_out_of_range;
|
|
if (ctrl & EMAC_RX_ST_IRE)
|
|
++st->rx_bd_in_range;
|
|
}
|
|
|
|
static inline void emac_rx_csum(struct emac_instance *dev,
|
|
struct sk_buff *skb, u16 ctrl)
|
|
{
|
|
#ifdef CONFIG_IBM_NEW_EMAC_TAH
|
|
if (!ctrl && dev->tah_dev) {
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
++dev->stats.rx_packets_csum;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static inline int emac_rx_sg_append(struct emac_instance *dev, int slot)
|
|
{
|
|
if (likely(dev->rx_sg_skb != NULL)) {
|
|
int len = dev->rx_desc[slot].data_len;
|
|
int tot_len = dev->rx_sg_skb->len + len;
|
|
|
|
if (unlikely(tot_len + 2 > dev->rx_skb_size)) {
|
|
++dev->estats.rx_dropped_mtu;
|
|
dev_kfree_skb(dev->rx_sg_skb);
|
|
dev->rx_sg_skb = NULL;
|
|
} else {
|
|
cacheable_memcpy(skb_tail_pointer(dev->rx_sg_skb),
|
|
dev->rx_skb[slot]->data, len);
|
|
skb_put(dev->rx_sg_skb, len);
|
|
emac_recycle_rx_skb(dev, slot, len);
|
|
return 0;
|
|
}
|
|
}
|
|
emac_recycle_rx_skb(dev, slot, 0);
|
|
return -1;
|
|
}
|
|
|
|
/* NAPI poll context */
|
|
static int emac_poll_rx(void *param, int budget)
|
|
{
|
|
struct emac_instance *dev = param;
|
|
int slot = dev->rx_slot, received = 0;
|
|
|
|
DBG2(dev, "poll_rx(%d)" NL, budget);
|
|
|
|
again:
|
|
while (budget > 0) {
|
|
int len;
|
|
struct sk_buff *skb;
|
|
u16 ctrl = dev->rx_desc[slot].ctrl;
|
|
|
|
if (ctrl & MAL_RX_CTRL_EMPTY)
|
|
break;
|
|
|
|
skb = dev->rx_skb[slot];
|
|
mb();
|
|
len = dev->rx_desc[slot].data_len;
|
|
|
|
if (unlikely(!MAL_IS_SINGLE_RX(ctrl)))
|
|
goto sg;
|
|
|
|
ctrl &= EMAC_BAD_RX_MASK;
|
|
if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
|
|
emac_parse_rx_error(dev, ctrl);
|
|
++dev->estats.rx_dropped_error;
|
|
emac_recycle_rx_skb(dev, slot, 0);
|
|
len = 0;
|
|
goto next;
|
|
}
|
|
|
|
if (len < ETH_HLEN) {
|
|
++dev->estats.rx_dropped_stack;
|
|
emac_recycle_rx_skb(dev, slot, len);
|
|
goto next;
|
|
}
|
|
|
|
if (len && len < EMAC_RX_COPY_THRESH) {
|
|
struct sk_buff *copy_skb =
|
|
alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
|
|
if (unlikely(!copy_skb))
|
|
goto oom;
|
|
|
|
skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
|
|
cacheable_memcpy(copy_skb->data - 2, skb->data - 2,
|
|
len + 2);
|
|
emac_recycle_rx_skb(dev, slot, len);
|
|
skb = copy_skb;
|
|
} else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
|
|
goto oom;
|
|
|
|
skb_put(skb, len);
|
|
push_packet:
|
|
skb->dev = dev->ndev;
|
|
skb->protocol = eth_type_trans(skb, dev->ndev);
|
|
emac_rx_csum(dev, skb, ctrl);
|
|
|
|
if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
|
|
++dev->estats.rx_dropped_stack;
|
|
next:
|
|
++dev->stats.rx_packets;
|
|
skip:
|
|
dev->stats.rx_bytes += len;
|
|
slot = (slot + 1) % NUM_RX_BUFF;
|
|
--budget;
|
|
++received;
|
|
continue;
|
|
sg:
|
|
if (ctrl & MAL_RX_CTRL_FIRST) {
|
|
BUG_ON(dev->rx_sg_skb);
|
|
if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
|
|
DBG(dev, "rx OOM %d" NL, slot);
|
|
++dev->estats.rx_dropped_oom;
|
|
emac_recycle_rx_skb(dev, slot, 0);
|
|
} else {
|
|
dev->rx_sg_skb = skb;
|
|
skb_put(skb, len);
|
|
}
|
|
} else if (!emac_rx_sg_append(dev, slot) &&
|
|
(ctrl & MAL_RX_CTRL_LAST)) {
|
|
|
|
skb = dev->rx_sg_skb;
|
|
dev->rx_sg_skb = NULL;
|
|
|
|
ctrl &= EMAC_BAD_RX_MASK;
|
|
if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
|
|
emac_parse_rx_error(dev, ctrl);
|
|
++dev->estats.rx_dropped_error;
|
|
dev_kfree_skb(skb);
|
|
len = 0;
|
|
} else
|
|
goto push_packet;
|
|
}
|
|
goto skip;
|
|
oom:
|
|
DBG(dev, "rx OOM %d" NL, slot);
|
|
/* Drop the packet and recycle skb */
|
|
++dev->estats.rx_dropped_oom;
|
|
emac_recycle_rx_skb(dev, slot, 0);
|
|
goto next;
|
|
}
|
|
|
|
if (received) {
|
|
DBG2(dev, "rx %d BDs" NL, received);
|
|
dev->rx_slot = slot;
|
|
}
|
|
|
|
if (unlikely(budget && test_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags))) {
|
|
mb();
|
|
if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) {
|
|
DBG2(dev, "rx restart" NL);
|
|
received = 0;
|
|
goto again;
|
|
}
|
|
|
|
if (dev->rx_sg_skb) {
|
|
DBG2(dev, "dropping partial rx packet" NL);
|
|
++dev->estats.rx_dropped_error;
|
|
dev_kfree_skb(dev->rx_sg_skb);
|
|
dev->rx_sg_skb = NULL;
|
|
}
|
|
|
|
clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags);
|
|
mal_enable_rx_channel(dev->mal, dev->mal_rx_chan);
|
|
emac_rx_enable(dev);
|
|
dev->rx_slot = 0;
|
|
}
|
|
return received;
|
|
}
|
|
|
|
/* NAPI poll context */
|
|
static int emac_peek_rx(void *param)
|
|
{
|
|
struct emac_instance *dev = param;
|
|
|
|
return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY);
|
|
}
|
|
|
|
/* NAPI poll context */
|
|
static int emac_peek_rx_sg(void *param)
|
|
{
|
|
struct emac_instance *dev = param;
|
|
|
|
int slot = dev->rx_slot;
|
|
while (1) {
|
|
u16 ctrl = dev->rx_desc[slot].ctrl;
|
|
if (ctrl & MAL_RX_CTRL_EMPTY)
|
|
return 0;
|
|
else if (ctrl & MAL_RX_CTRL_LAST)
|
|
return 1;
|
|
|
|
slot = (slot + 1) % NUM_RX_BUFF;
|
|
|
|
/* I'm just being paranoid here :) */
|
|
if (unlikely(slot == dev->rx_slot))
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Hard IRQ */
|
|
static void emac_rxde(void *param)
|
|
{
|
|
struct emac_instance *dev = param;
|
|
|
|
++dev->estats.rx_stopped;
|
|
emac_rx_disable_async(dev);
|
|
}
|
|
|
|
/* Hard IRQ */
|
|
static irqreturn_t emac_irq(int irq, void *dev_instance)
|
|
{
|
|
struct emac_instance *dev = dev_instance;
|
|
struct emac_regs __iomem *p = dev->emacp;
|
|
struct emac_error_stats *st = &dev->estats;
|
|
u32 isr;
|
|
|
|
spin_lock(&dev->lock);
|
|
|
|
isr = in_be32(&p->isr);
|
|
out_be32(&p->isr, isr);
|
|
|
|
DBG(dev, "isr = %08x" NL, isr);
|
|
|
|
if (isr & EMAC4_ISR_TXPE)
|
|
++st->tx_parity;
|
|
if (isr & EMAC4_ISR_RXPE)
|
|
++st->rx_parity;
|
|
if (isr & EMAC4_ISR_TXUE)
|
|
++st->tx_underrun;
|
|
if (isr & EMAC4_ISR_RXOE)
|
|
++st->rx_fifo_overrun;
|
|
if (isr & EMAC_ISR_OVR)
|
|
++st->rx_overrun;
|
|
if (isr & EMAC_ISR_BP)
|
|
++st->rx_bad_packet;
|
|
if (isr & EMAC_ISR_RP)
|
|
++st->rx_runt_packet;
|
|
if (isr & EMAC_ISR_SE)
|
|
++st->rx_short_event;
|
|
if (isr & EMAC_ISR_ALE)
|
|
++st->rx_alignment_error;
|
|
if (isr & EMAC_ISR_BFCS)
|
|
++st->rx_bad_fcs;
|
|
if (isr & EMAC_ISR_PTLE)
|
|
++st->rx_packet_too_long;
|
|
if (isr & EMAC_ISR_ORE)
|
|
++st->rx_out_of_range;
|
|
if (isr & EMAC_ISR_IRE)
|
|
++st->rx_in_range;
|
|
if (isr & EMAC_ISR_SQE)
|
|
++st->tx_sqe;
|
|
if (isr & EMAC_ISR_TE)
|
|
++st->tx_errors;
|
|
|
|
spin_unlock(&dev->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct net_device_stats *emac_stats(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
struct emac_stats *st = &dev->stats;
|
|
struct emac_error_stats *est = &dev->estats;
|
|
struct net_device_stats *nst = &dev->nstats;
|
|
unsigned long flags;
|
|
|
|
DBG2(dev, "stats" NL);
|
|
|
|
/* Compute "legacy" statistics */
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
nst->rx_packets = (unsigned long)st->rx_packets;
|
|
nst->rx_bytes = (unsigned long)st->rx_bytes;
|
|
nst->tx_packets = (unsigned long)st->tx_packets;
|
|
nst->tx_bytes = (unsigned long)st->tx_bytes;
|
|
nst->rx_dropped = (unsigned long)(est->rx_dropped_oom +
|
|
est->rx_dropped_error +
|
|
est->rx_dropped_resize +
|
|
est->rx_dropped_mtu);
|
|
nst->tx_dropped = (unsigned long)est->tx_dropped;
|
|
|
|
nst->rx_errors = (unsigned long)est->rx_bd_errors;
|
|
nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun +
|
|
est->rx_fifo_overrun +
|
|
est->rx_overrun);
|
|
nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error +
|
|
est->rx_alignment_error);
|
|
nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs +
|
|
est->rx_bad_fcs);
|
|
nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet +
|
|
est->rx_bd_short_event +
|
|
est->rx_bd_packet_too_long +
|
|
est->rx_bd_out_of_range +
|
|
est->rx_bd_in_range +
|
|
est->rx_runt_packet +
|
|
est->rx_short_event +
|
|
est->rx_packet_too_long +
|
|
est->rx_out_of_range +
|
|
est->rx_in_range);
|
|
|
|
nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors);
|
|
nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun +
|
|
est->tx_underrun);
|
|
nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss;
|
|
nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral +
|
|
est->tx_bd_excessive_collisions +
|
|
est->tx_bd_late_collision +
|
|
est->tx_bd_multple_collisions);
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
return nst;
|
|
}
|
|
|
|
static struct mal_commac_ops emac_commac_ops = {
|
|
.poll_tx = &emac_poll_tx,
|
|
.poll_rx = &emac_poll_rx,
|
|
.peek_rx = &emac_peek_rx,
|
|
.rxde = &emac_rxde,
|
|
};
|
|
|
|
static struct mal_commac_ops emac_commac_sg_ops = {
|
|
.poll_tx = &emac_poll_tx,
|
|
.poll_rx = &emac_poll_rx,
|
|
.peek_rx = &emac_peek_rx_sg,
|
|
.rxde = &emac_rxde,
|
|
};
|
|
|
|
/* Ethtool support */
|
|
static int emac_ethtool_get_settings(struct net_device *ndev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
cmd->supported = dev->phy.features;
|
|
cmd->port = PORT_MII;
|
|
cmd->phy_address = dev->phy.address;
|
|
cmd->transceiver =
|
|
dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL;
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
cmd->advertising = dev->phy.advertising;
|
|
cmd->autoneg = dev->phy.autoneg;
|
|
cmd->speed = dev->phy.speed;
|
|
cmd->duplex = dev->phy.duplex;
|
|
mutex_unlock(&dev->link_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int emac_ethtool_set_settings(struct net_device *ndev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
u32 f = dev->phy.features;
|
|
|
|
DBG(dev, "set_settings(%d, %d, %d, 0x%08x)" NL,
|
|
cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
|
|
|
|
/* Basic sanity checks */
|
|
if (dev->phy.address < 0)
|
|
return -EOPNOTSUPP;
|
|
if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
|
|
return -EINVAL;
|
|
if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
|
|
return -EINVAL;
|
|
if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
|
|
return -EINVAL;
|
|
|
|
if (cmd->autoneg == AUTONEG_DISABLE) {
|
|
switch (cmd->speed) {
|
|
case SPEED_10:
|
|
if (cmd->duplex == DUPLEX_HALF
|
|
&& !(f & SUPPORTED_10baseT_Half))
|
|
return -EINVAL;
|
|
if (cmd->duplex == DUPLEX_FULL
|
|
&& !(f & SUPPORTED_10baseT_Full))
|
|
return -EINVAL;
|
|
break;
|
|
case SPEED_100:
|
|
if (cmd->duplex == DUPLEX_HALF
|
|
&& !(f & SUPPORTED_100baseT_Half))
|
|
return -EINVAL;
|
|
if (cmd->duplex == DUPLEX_FULL
|
|
&& !(f & SUPPORTED_100baseT_Full))
|
|
return -EINVAL;
|
|
break;
|
|
case SPEED_1000:
|
|
if (cmd->duplex == DUPLEX_HALF
|
|
&& !(f & SUPPORTED_1000baseT_Half))
|
|
return -EINVAL;
|
|
if (cmd->duplex == DUPLEX_FULL
|
|
&& !(f & SUPPORTED_1000baseT_Full))
|
|
return -EINVAL;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed,
|
|
cmd->duplex);
|
|
mutex_unlock(&dev->link_lock);
|
|
|
|
} else {
|
|
if (!(f & SUPPORTED_Autoneg))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
dev->phy.def->ops->setup_aneg(&dev->phy,
|
|
(cmd->advertising & f) |
|
|
(dev->phy.advertising &
|
|
(ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause)));
|
|
mutex_unlock(&dev->link_lock);
|
|
}
|
|
emac_force_link_update(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void emac_ethtool_get_ringparam(struct net_device *ndev,
|
|
struct ethtool_ringparam *rp)
|
|
{
|
|
rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF;
|
|
rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF;
|
|
}
|
|
|
|
static void emac_ethtool_get_pauseparam(struct net_device *ndev,
|
|
struct ethtool_pauseparam *pp)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
if ((dev->phy.features & SUPPORTED_Autoneg) &&
|
|
(dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause)))
|
|
pp->autoneg = 1;
|
|
|
|
if (dev->phy.duplex == DUPLEX_FULL) {
|
|
if (dev->phy.pause)
|
|
pp->rx_pause = pp->tx_pause = 1;
|
|
else if (dev->phy.asym_pause)
|
|
pp->tx_pause = 1;
|
|
}
|
|
mutex_unlock(&dev->link_lock);
|
|
}
|
|
|
|
static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
return dev->tah_dev != NULL;
|
|
}
|
|
|
|
static int emac_get_regs_len(struct emac_instance *dev)
|
|
{
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
|
|
return sizeof(struct emac_ethtool_regs_subhdr) +
|
|
EMAC4_ETHTOOL_REGS_SIZE(dev);
|
|
else
|
|
return sizeof(struct emac_ethtool_regs_subhdr) +
|
|
EMAC_ETHTOOL_REGS_SIZE(dev);
|
|
}
|
|
|
|
static int emac_ethtool_get_regs_len(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
int size;
|
|
|
|
size = sizeof(struct emac_ethtool_regs_hdr) +
|
|
emac_get_regs_len(dev) + mal_get_regs_len(dev->mal);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
|
|
size += zmii_get_regs_len(dev->zmii_dev);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
|
|
size += rgmii_get_regs_len(dev->rgmii_dev);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
|
|
size += tah_get_regs_len(dev->tah_dev);
|
|
|
|
return size;
|
|
}
|
|
|
|
static void *emac_dump_regs(struct emac_instance *dev, void *buf)
|
|
{
|
|
struct emac_ethtool_regs_subhdr *hdr = buf;
|
|
|
|
hdr->index = dev->cell_index;
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4)) {
|
|
hdr->version = EMAC4_ETHTOOL_REGS_VER;
|
|
memcpy_fromio(hdr + 1, dev->emacp, EMAC4_ETHTOOL_REGS_SIZE(dev));
|
|
return ((void *)(hdr + 1) + EMAC4_ETHTOOL_REGS_SIZE(dev));
|
|
} else {
|
|
hdr->version = EMAC_ETHTOOL_REGS_VER;
|
|
memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE(dev));
|
|
return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE(dev));
|
|
}
|
|
}
|
|
|
|
static void emac_ethtool_get_regs(struct net_device *ndev,
|
|
struct ethtool_regs *regs, void *buf)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
struct emac_ethtool_regs_hdr *hdr = buf;
|
|
|
|
hdr->components = 0;
|
|
buf = hdr + 1;
|
|
|
|
buf = mal_dump_regs(dev->mal, buf);
|
|
buf = emac_dump_regs(dev, buf);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) {
|
|
hdr->components |= EMAC_ETHTOOL_REGS_ZMII;
|
|
buf = zmii_dump_regs(dev->zmii_dev, buf);
|
|
}
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
|
|
hdr->components |= EMAC_ETHTOOL_REGS_RGMII;
|
|
buf = rgmii_dump_regs(dev->rgmii_dev, buf);
|
|
}
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) {
|
|
hdr->components |= EMAC_ETHTOOL_REGS_TAH;
|
|
buf = tah_dump_regs(dev->tah_dev, buf);
|
|
}
|
|
}
|
|
|
|
static int emac_ethtool_nway_reset(struct net_device *ndev)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
int res = 0;
|
|
|
|
DBG(dev, "nway_reset" NL);
|
|
|
|
if (dev->phy.address < 0)
|
|
return -EOPNOTSUPP;
|
|
|
|
mutex_lock(&dev->link_lock);
|
|
if (!dev->phy.autoneg) {
|
|
res = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising);
|
|
out:
|
|
mutex_unlock(&dev->link_lock);
|
|
emac_force_link_update(dev);
|
|
return res;
|
|
}
|
|
|
|
static int emac_ethtool_get_stats_count(struct net_device *ndev)
|
|
{
|
|
return EMAC_ETHTOOL_STATS_COUNT;
|
|
}
|
|
|
|
static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
|
|
u8 * buf)
|
|
{
|
|
if (stringset == ETH_SS_STATS)
|
|
memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys));
|
|
}
|
|
|
|
static void emac_ethtool_get_ethtool_stats(struct net_device *ndev,
|
|
struct ethtool_stats *estats,
|
|
u64 * tmp_stats)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
memcpy(tmp_stats, &dev->stats, sizeof(dev->stats));
|
|
tmp_stats += sizeof(dev->stats) / sizeof(u64);
|
|
memcpy(tmp_stats, &dev->estats, sizeof(dev->estats));
|
|
}
|
|
|
|
static void emac_ethtool_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
|
|
strcpy(info->driver, "ibm_emac");
|
|
strcpy(info->version, DRV_VERSION);
|
|
info->fw_version[0] = '\0';
|
|
sprintf(info->bus_info, "PPC 4xx EMAC-%d %s",
|
|
dev->cell_index, dev->ofdev->node->full_name);
|
|
info->n_stats = emac_ethtool_get_stats_count(ndev);
|
|
info->regdump_len = emac_ethtool_get_regs_len(ndev);
|
|
}
|
|
|
|
static const struct ethtool_ops emac_ethtool_ops = {
|
|
.get_settings = emac_ethtool_get_settings,
|
|
.set_settings = emac_ethtool_set_settings,
|
|
.get_drvinfo = emac_ethtool_get_drvinfo,
|
|
|
|
.get_regs_len = emac_ethtool_get_regs_len,
|
|
.get_regs = emac_ethtool_get_regs,
|
|
|
|
.nway_reset = emac_ethtool_nway_reset,
|
|
|
|
.get_ringparam = emac_ethtool_get_ringparam,
|
|
.get_pauseparam = emac_ethtool_get_pauseparam,
|
|
|
|
.get_rx_csum = emac_ethtool_get_rx_csum,
|
|
|
|
.get_strings = emac_ethtool_get_strings,
|
|
.get_stats_count = emac_ethtool_get_stats_count,
|
|
.get_ethtool_stats = emac_ethtool_get_ethtool_stats,
|
|
|
|
.get_link = ethtool_op_get_link,
|
|
.get_tx_csum = ethtool_op_get_tx_csum,
|
|
.get_sg = ethtool_op_get_sg,
|
|
};
|
|
|
|
static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct emac_instance *dev = netdev_priv(ndev);
|
|
uint16_t *data = (uint16_t *) & rq->ifr_ifru;
|
|
|
|
DBG(dev, "ioctl %08x" NL, cmd);
|
|
|
|
if (dev->phy.address < 0)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY:
|
|
case SIOCDEVPRIVATE:
|
|
data[0] = dev->phy.address;
|
|
/* Fall through */
|
|
case SIOCGMIIREG:
|
|
case SIOCDEVPRIVATE + 1:
|
|
data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
|
|
return 0;
|
|
|
|
case SIOCSMIIREG:
|
|
case SIOCDEVPRIVATE + 2:
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
struct emac_depentry {
|
|
u32 phandle;
|
|
struct device_node *node;
|
|
struct of_device *ofdev;
|
|
void *drvdata;
|
|
};
|
|
|
|
#define EMAC_DEP_MAL_IDX 0
|
|
#define EMAC_DEP_ZMII_IDX 1
|
|
#define EMAC_DEP_RGMII_IDX 2
|
|
#define EMAC_DEP_TAH_IDX 3
|
|
#define EMAC_DEP_MDIO_IDX 4
|
|
#define EMAC_DEP_PREV_IDX 5
|
|
#define EMAC_DEP_COUNT 6
|
|
|
|
static int __devinit emac_check_deps(struct emac_instance *dev,
|
|
struct emac_depentry *deps)
|
|
{
|
|
int i, there = 0;
|
|
struct device_node *np;
|
|
|
|
for (i = 0; i < EMAC_DEP_COUNT; i++) {
|
|
/* no dependency on that item, allright */
|
|
if (deps[i].phandle == 0) {
|
|
there++;
|
|
continue;
|
|
}
|
|
/* special case for blist as the dependency might go away */
|
|
if (i == EMAC_DEP_PREV_IDX) {
|
|
np = *(dev->blist - 1);
|
|
if (np == NULL) {
|
|
deps[i].phandle = 0;
|
|
there++;
|
|
continue;
|
|
}
|
|
if (deps[i].node == NULL)
|
|
deps[i].node = of_node_get(np);
|
|
}
|
|
if (deps[i].node == NULL)
|
|
deps[i].node = of_find_node_by_phandle(deps[i].phandle);
|
|
if (deps[i].node == NULL)
|
|
continue;
|
|
if (deps[i].ofdev == NULL)
|
|
deps[i].ofdev = of_find_device_by_node(deps[i].node);
|
|
if (deps[i].ofdev == NULL)
|
|
continue;
|
|
if (deps[i].drvdata == NULL)
|
|
deps[i].drvdata = dev_get_drvdata(&deps[i].ofdev->dev);
|
|
if (deps[i].drvdata != NULL)
|
|
there++;
|
|
}
|
|
return (there == EMAC_DEP_COUNT);
|
|
}
|
|
|
|
static void emac_put_deps(struct emac_instance *dev)
|
|
{
|
|
if (dev->mal_dev)
|
|
of_dev_put(dev->mal_dev);
|
|
if (dev->zmii_dev)
|
|
of_dev_put(dev->zmii_dev);
|
|
if (dev->rgmii_dev)
|
|
of_dev_put(dev->rgmii_dev);
|
|
if (dev->mdio_dev)
|
|
of_dev_put(dev->mdio_dev);
|
|
if (dev->tah_dev)
|
|
of_dev_put(dev->tah_dev);
|
|
}
|
|
|
|
static int __devinit emac_of_bus_notify(struct notifier_block *nb,
|
|
unsigned long action, void *data)
|
|
{
|
|
/* We are only intereted in device addition */
|
|
if (action == BUS_NOTIFY_BOUND_DRIVER)
|
|
wake_up_all(&emac_probe_wait);
|
|
return 0;
|
|
}
|
|
|
|
static struct notifier_block emac_of_bus_notifier __devinitdata = {
|
|
.notifier_call = emac_of_bus_notify
|
|
};
|
|
|
|
static int __devinit emac_wait_deps(struct emac_instance *dev)
|
|
{
|
|
struct emac_depentry deps[EMAC_DEP_COUNT];
|
|
int i, err;
|
|
|
|
memset(&deps, 0, sizeof(deps));
|
|
|
|
deps[EMAC_DEP_MAL_IDX].phandle = dev->mal_ph;
|
|
deps[EMAC_DEP_ZMII_IDX].phandle = dev->zmii_ph;
|
|
deps[EMAC_DEP_RGMII_IDX].phandle = dev->rgmii_ph;
|
|
if (dev->tah_ph)
|
|
deps[EMAC_DEP_TAH_IDX].phandle = dev->tah_ph;
|
|
if (dev->mdio_ph)
|
|
deps[EMAC_DEP_MDIO_IDX].phandle = dev->mdio_ph;
|
|
if (dev->blist && dev->blist > emac_boot_list)
|
|
deps[EMAC_DEP_PREV_IDX].phandle = 0xffffffffu;
|
|
bus_register_notifier(&of_platform_bus_type, &emac_of_bus_notifier);
|
|
wait_event_timeout(emac_probe_wait,
|
|
emac_check_deps(dev, deps),
|
|
EMAC_PROBE_DEP_TIMEOUT);
|
|
bus_unregister_notifier(&of_platform_bus_type, &emac_of_bus_notifier);
|
|
err = emac_check_deps(dev, deps) ? 0 : -ENODEV;
|
|
for (i = 0; i < EMAC_DEP_COUNT; i++) {
|
|
if (deps[i].node)
|
|
of_node_put(deps[i].node);
|
|
if (err && deps[i].ofdev)
|
|
of_dev_put(deps[i].ofdev);
|
|
}
|
|
if (err == 0) {
|
|
dev->mal_dev = deps[EMAC_DEP_MAL_IDX].ofdev;
|
|
dev->zmii_dev = deps[EMAC_DEP_ZMII_IDX].ofdev;
|
|
dev->rgmii_dev = deps[EMAC_DEP_RGMII_IDX].ofdev;
|
|
dev->tah_dev = deps[EMAC_DEP_TAH_IDX].ofdev;
|
|
dev->mdio_dev = deps[EMAC_DEP_MDIO_IDX].ofdev;
|
|
}
|
|
if (deps[EMAC_DEP_PREV_IDX].ofdev)
|
|
of_dev_put(deps[EMAC_DEP_PREV_IDX].ofdev);
|
|
return err;
|
|
}
|
|
|
|
static int __devinit emac_read_uint_prop(struct device_node *np, const char *name,
|
|
u32 *val, int fatal)
|
|
{
|
|
int len;
|
|
const u32 *prop = of_get_property(np, name, &len);
|
|
if (prop == NULL || len < sizeof(u32)) {
|
|
if (fatal)
|
|
printk(KERN_ERR "%s: missing %s property\n",
|
|
np->full_name, name);
|
|
return -ENODEV;
|
|
}
|
|
*val = *prop;
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit emac_init_phy(struct emac_instance *dev)
|
|
{
|
|
struct device_node *np = dev->ofdev->node;
|
|
struct net_device *ndev = dev->ndev;
|
|
u32 phy_map, adv;
|
|
int i;
|
|
|
|
dev->phy.dev = ndev;
|
|
dev->phy.mode = dev->phy_mode;
|
|
|
|
/* PHY-less configuration.
|
|
* XXX I probably should move these settings to the dev tree
|
|
*/
|
|
if (dev->phy_address == 0xffffffff && dev->phy_map == 0xffffffff) {
|
|
emac_reset(dev);
|
|
|
|
/* PHY-less configuration.
|
|
* XXX I probably should move these settings to the dev tree
|
|
*/
|
|
dev->phy.address = -1;
|
|
dev->phy.features = SUPPORTED_MII;
|
|
if (emac_phy_supports_gige(dev->phy_mode))
|
|
dev->phy.features |= SUPPORTED_1000baseT_Full;
|
|
else
|
|
dev->phy.features |= SUPPORTED_100baseT_Full;
|
|
dev->phy.pause = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&emac_phy_map_lock);
|
|
phy_map = dev->phy_map | busy_phy_map;
|
|
|
|
DBG(dev, "PHY maps %08x %08x" NL, dev->phy_map, busy_phy_map);
|
|
|
|
dev->phy.mdio_read = emac_mdio_read;
|
|
dev->phy.mdio_write = emac_mdio_write;
|
|
|
|
/* Enable internal clock source */
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
|
|
dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
|
|
#endif
|
|
/* PHY clock workaround */
|
|
emac_rx_clk_tx(dev);
|
|
|
|
/* Enable internal clock source on 440GX*/
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
|
|
dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
|
|
#endif
|
|
/* Configure EMAC with defaults so we can at least use MDIO
|
|
* This is needed mostly for 440GX
|
|
*/
|
|
if (emac_phy_gpcs(dev->phy.mode)) {
|
|
/* XXX
|
|
* Make GPCS PHY address equal to EMAC index.
|
|
* We probably should take into account busy_phy_map
|
|
* and/or phy_map here.
|
|
*
|
|
* Note that the busy_phy_map is currently global
|
|
* while it should probably be per-ASIC...
|
|
*/
|
|
dev->phy.gpcs_address = dev->gpcs_address;
|
|
if (dev->phy.gpcs_address == 0xffffffff)
|
|
dev->phy.address = dev->cell_index;
|
|
}
|
|
|
|
emac_configure(dev);
|
|
|
|
if (dev->phy_address != 0xffffffff)
|
|
phy_map = ~(1 << dev->phy_address);
|
|
|
|
for (i = 0; i < 0x20; phy_map >>= 1, ++i)
|
|
if (!(phy_map & 1)) {
|
|
int r;
|
|
busy_phy_map |= 1 << i;
|
|
|
|
/* Quick check if there is a PHY at the address */
|
|
r = emac_mdio_read(dev->ndev, i, MII_BMCR);
|
|
if (r == 0xffff || r < 0)
|
|
continue;
|
|
if (!emac_mii_phy_probe(&dev->phy, i))
|
|
break;
|
|
}
|
|
|
|
/* Enable external clock source */
|
|
#ifdef CONFIG_PPC_DCR_NATIVE
|
|
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
|
|
dcri_clrset(SDR0, SDR0_MFR, SDR0_MFR_ECS, 0);
|
|
#endif
|
|
mutex_unlock(&emac_phy_map_lock);
|
|
if (i == 0x20) {
|
|
printk(KERN_WARNING "%s: can't find PHY!\n", np->full_name);
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Init PHY */
|
|
if (dev->phy.def->ops->init)
|
|
dev->phy.def->ops->init(&dev->phy);
|
|
|
|
/* Disable any PHY features not supported by the platform */
|
|
dev->phy.def->features &= ~dev->phy_feat_exc;
|
|
|
|
/* Setup initial link parameters */
|
|
if (dev->phy.features & SUPPORTED_Autoneg) {
|
|
adv = dev->phy.features;
|
|
if (!emac_has_feature(dev, EMAC_FTR_NO_FLOW_CONTROL_40x))
|
|
adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
|
|
/* Restart autonegotiation */
|
|
dev->phy.def->ops->setup_aneg(&dev->phy, adv);
|
|
} else {
|
|
u32 f = dev->phy.def->features;
|
|
int speed = SPEED_10, fd = DUPLEX_HALF;
|
|
|
|
/* Select highest supported speed/duplex */
|
|
if (f & SUPPORTED_1000baseT_Full) {
|
|
speed = SPEED_1000;
|
|
fd = DUPLEX_FULL;
|
|
} else if (f & SUPPORTED_1000baseT_Half)
|
|
speed = SPEED_1000;
|
|
else if (f & SUPPORTED_100baseT_Full) {
|
|
speed = SPEED_100;
|
|
fd = DUPLEX_FULL;
|
|
} else if (f & SUPPORTED_100baseT_Half)
|
|
speed = SPEED_100;
|
|
else if (f & SUPPORTED_10baseT_Full)
|
|
fd = DUPLEX_FULL;
|
|
|
|
/* Force link parameters */
|
|
dev->phy.def->ops->setup_forced(&dev->phy, speed, fd);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit emac_init_config(struct emac_instance *dev)
|
|
{
|
|
struct device_node *np = dev->ofdev->node;
|
|
const void *p;
|
|
unsigned int plen;
|
|
const char *pm, *phy_modes[] = {
|
|
[PHY_MODE_NA] = "",
|
|
[PHY_MODE_MII] = "mii",
|
|
[PHY_MODE_RMII] = "rmii",
|
|
[PHY_MODE_SMII] = "smii",
|
|
[PHY_MODE_RGMII] = "rgmii",
|
|
[PHY_MODE_TBI] = "tbi",
|
|
[PHY_MODE_GMII] = "gmii",
|
|
[PHY_MODE_RTBI] = "rtbi",
|
|
[PHY_MODE_SGMII] = "sgmii",
|
|
};
|
|
|
|
/* Read config from device-tree */
|
|
if (emac_read_uint_prop(np, "mal-device", &dev->mal_ph, 1))
|
|
return -ENXIO;
|
|
if (emac_read_uint_prop(np, "mal-tx-channel", &dev->mal_tx_chan, 1))
|
|
return -ENXIO;
|
|
if (emac_read_uint_prop(np, "mal-rx-channel", &dev->mal_rx_chan, 1))
|
|
return -ENXIO;
|
|
if (emac_read_uint_prop(np, "cell-index", &dev->cell_index, 1))
|
|
return -ENXIO;
|
|
if (emac_read_uint_prop(np, "max-frame-size", &dev->max_mtu, 0))
|
|
dev->max_mtu = 1500;
|
|
if (emac_read_uint_prop(np, "rx-fifo-size", &dev->rx_fifo_size, 0))
|
|
dev->rx_fifo_size = 2048;
|
|
if (emac_read_uint_prop(np, "tx-fifo-size", &dev->tx_fifo_size, 0))
|
|
dev->tx_fifo_size = 2048;
|
|
if (emac_read_uint_prop(np, "rx-fifo-size-gige", &dev->rx_fifo_size_gige, 0))
|
|
dev->rx_fifo_size_gige = dev->rx_fifo_size;
|
|
if (emac_read_uint_prop(np, "tx-fifo-size-gige", &dev->tx_fifo_size_gige, 0))
|
|
dev->tx_fifo_size_gige = dev->tx_fifo_size;
|
|
if (emac_read_uint_prop(np, "phy-address", &dev->phy_address, 0))
|
|
dev->phy_address = 0xffffffff;
|
|
if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0))
|
|
dev->phy_map = 0xffffffff;
|
|
if (emac_read_uint_prop(np, "gpcs-address", &dev->gpcs_address, 0))
|
|
dev->gpcs_address = 0xffffffff;
|
|
if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1))
|
|
return -ENXIO;
|
|
if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0))
|
|
dev->tah_ph = 0;
|
|
if (emac_read_uint_prop(np, "tah-channel", &dev->tah_port, 0))
|
|
dev->tah_port = 0;
|
|
if (emac_read_uint_prop(np, "mdio-device", &dev->mdio_ph, 0))
|
|
dev->mdio_ph = 0;
|
|
if (emac_read_uint_prop(np, "zmii-device", &dev->zmii_ph, 0))
|
|
dev->zmii_ph = 0;;
|
|
if (emac_read_uint_prop(np, "zmii-channel", &dev->zmii_port, 0))
|
|
dev->zmii_port = 0xffffffff;;
|
|
if (emac_read_uint_prop(np, "rgmii-device", &dev->rgmii_ph, 0))
|
|
dev->rgmii_ph = 0;;
|
|
if (emac_read_uint_prop(np, "rgmii-channel", &dev->rgmii_port, 0))
|
|
dev->rgmii_port = 0xffffffff;;
|
|
if (emac_read_uint_prop(np, "fifo-entry-size", &dev->fifo_entry_size, 0))
|
|
dev->fifo_entry_size = 16;
|
|
if (emac_read_uint_prop(np, "mal-burst-size", &dev->mal_burst_size, 0))
|
|
dev->mal_burst_size = 256;
|
|
|
|
/* PHY mode needs some decoding */
|
|
dev->phy_mode = PHY_MODE_NA;
|
|
pm = of_get_property(np, "phy-mode", &plen);
|
|
if (pm != NULL) {
|
|
int i;
|
|
for (i = 0; i < ARRAY_SIZE(phy_modes); i++)
|
|
if (!strcasecmp(pm, phy_modes[i])) {
|
|
dev->phy_mode = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Backward compat with non-final DT */
|
|
if (dev->phy_mode == PHY_MODE_NA && pm != NULL && plen == 4) {
|
|
u32 nmode = *(const u32 *)pm;
|
|
if (nmode > PHY_MODE_NA && nmode <= PHY_MODE_SGMII)
|
|
dev->phy_mode = nmode;
|
|
}
|
|
|
|
/* Check EMAC version */
|
|
if (of_device_is_compatible(np, "ibm,emac4sync")) {
|
|
dev->features |= (EMAC_FTR_EMAC4 | EMAC_FTR_EMAC4SYNC);
|
|
if (of_device_is_compatible(np, "ibm,emac-460ex") ||
|
|
of_device_is_compatible(np, "ibm,emac-460gt"))
|
|
dev->features |= EMAC_FTR_460EX_PHY_CLK_FIX;
|
|
if (of_device_is_compatible(np, "ibm,emac-405ex") ||
|
|
of_device_is_compatible(np, "ibm,emac-405exr"))
|
|
dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
|
|
} else if (of_device_is_compatible(np, "ibm,emac4")) {
|
|
dev->features |= EMAC_FTR_EMAC4;
|
|
if (of_device_is_compatible(np, "ibm,emac-440gx"))
|
|
dev->features |= EMAC_FTR_440GX_PHY_CLK_FIX;
|
|
} else {
|
|
if (of_device_is_compatible(np, "ibm,emac-440ep") ||
|
|
of_device_is_compatible(np, "ibm,emac-440gr"))
|
|
dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
|
|
if (of_device_is_compatible(np, "ibm,emac-405ez")) {
|
|
#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
|
|
dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
|
|
#else
|
|
printk(KERN_ERR "%s: Flow control not disabled!\n",
|
|
np->full_name);
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
}
|
|
|
|
/* Fixup some feature bits based on the device tree */
|
|
if (of_get_property(np, "has-inverted-stacr-oc", NULL))
|
|
dev->features |= EMAC_FTR_STACR_OC_INVERT;
|
|
if (of_get_property(np, "has-new-stacr-staopc", NULL))
|
|
dev->features |= EMAC_FTR_HAS_NEW_STACR;
|
|
|
|
/* CAB lacks the appropriate properties */
|
|
if (of_device_is_compatible(np, "ibm,emac-axon"))
|
|
dev->features |= EMAC_FTR_HAS_NEW_STACR |
|
|
EMAC_FTR_STACR_OC_INVERT;
|
|
|
|
/* Enable TAH/ZMII/RGMII features as found */
|
|
if (dev->tah_ph != 0) {
|
|
#ifdef CONFIG_IBM_NEW_EMAC_TAH
|
|
dev->features |= EMAC_FTR_HAS_TAH;
|
|
#else
|
|
printk(KERN_ERR "%s: TAH support not enabled !\n",
|
|
np->full_name);
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
if (dev->zmii_ph != 0) {
|
|
#ifdef CONFIG_IBM_NEW_EMAC_ZMII
|
|
dev->features |= EMAC_FTR_HAS_ZMII;
|
|
#else
|
|
printk(KERN_ERR "%s: ZMII support not enabled !\n",
|
|
np->full_name);
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
if (dev->rgmii_ph != 0) {
|
|
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
|
|
dev->features |= EMAC_FTR_HAS_RGMII;
|
|
#else
|
|
printk(KERN_ERR "%s: RGMII support not enabled !\n",
|
|
np->full_name);
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
/* Read MAC-address */
|
|
p = of_get_property(np, "local-mac-address", NULL);
|
|
if (p == NULL) {
|
|
printk(KERN_ERR "%s: Can't find local-mac-address property\n",
|
|
np->full_name);
|
|
return -ENXIO;
|
|
}
|
|
memcpy(dev->ndev->dev_addr, p, 6);
|
|
|
|
/* IAHT and GAHT filter parameterization */
|
|
if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC)) {
|
|
dev->xaht_slots_shift = EMAC4SYNC_XAHT_SLOTS_SHIFT;
|
|
dev->xaht_width_shift = EMAC4SYNC_XAHT_WIDTH_SHIFT;
|
|
} else {
|
|
dev->xaht_slots_shift = EMAC4_XAHT_SLOTS_SHIFT;
|
|
dev->xaht_width_shift = EMAC4_XAHT_WIDTH_SHIFT;
|
|
}
|
|
|
|
DBG(dev, "features : 0x%08x / 0x%08x\n", dev->features, EMAC_FTRS_POSSIBLE);
|
|
DBG(dev, "tx_fifo_size : %d (%d gige)\n", dev->tx_fifo_size, dev->tx_fifo_size_gige);
|
|
DBG(dev, "rx_fifo_size : %d (%d gige)\n", dev->rx_fifo_size, dev->rx_fifo_size_gige);
|
|
DBG(dev, "max_mtu : %d\n", dev->max_mtu);
|
|
DBG(dev, "OPB freq : %d\n", dev->opb_bus_freq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops emac_netdev_ops = {
|
|
.ndo_open = emac_open,
|
|
.ndo_stop = emac_close,
|
|
.ndo_get_stats = emac_stats,
|
|
.ndo_set_multicast_list = emac_set_multicast_list,
|
|
.ndo_do_ioctl = emac_ioctl,
|
|
.ndo_tx_timeout = emac_tx_timeout,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_start_xmit = emac_start_xmit,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
};
|
|
|
|
static const struct net_device_ops emac_gige_netdev_ops = {
|
|
.ndo_open = emac_open,
|
|
.ndo_stop = emac_close,
|
|
.ndo_get_stats = emac_stats,
|
|
.ndo_set_multicast_list = emac_set_multicast_list,
|
|
.ndo_do_ioctl = emac_ioctl,
|
|
.ndo_tx_timeout = emac_tx_timeout,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_start_xmit = emac_start_xmit_sg,
|
|
.ndo_change_mtu = emac_change_mtu,
|
|
};
|
|
|
|
static int __devinit emac_probe(struct of_device *ofdev,
|
|
const struct of_device_id *match)
|
|
{
|
|
struct net_device *ndev;
|
|
struct emac_instance *dev;
|
|
struct device_node *np = ofdev->node;
|
|
struct device_node **blist = NULL;
|
|
int err, i;
|
|
|
|
/* Skip unused/unwired EMACS. We leave the check for an unused
|
|
* property here for now, but new flat device trees should set a
|
|
* status property to "disabled" instead.
|
|
*/
|
|
if (of_get_property(np, "unused", NULL) || !of_device_is_available(np))
|
|
return -ENODEV;
|
|
|
|
/* Find ourselves in the bootlist if we are there */
|
|
for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++)
|
|
if (emac_boot_list[i] == np)
|
|
blist = &emac_boot_list[i];
|
|
|
|
/* Allocate our net_device structure */
|
|
err = -ENOMEM;
|
|
ndev = alloc_etherdev(sizeof(struct emac_instance));
|
|
if (!ndev) {
|
|
printk(KERN_ERR "%s: could not allocate ethernet device!\n",
|
|
np->full_name);
|
|
goto err_gone;
|
|
}
|
|
dev = netdev_priv(ndev);
|
|
dev->ndev = ndev;
|
|
dev->ofdev = ofdev;
|
|
dev->blist = blist;
|
|
SET_NETDEV_DEV(ndev, &ofdev->dev);
|
|
|
|
/* Initialize some embedded data structures */
|
|
mutex_init(&dev->mdio_lock);
|
|
mutex_init(&dev->link_lock);
|
|
spin_lock_init(&dev->lock);
|
|
INIT_WORK(&dev->reset_work, emac_reset_work);
|
|
|
|
/* Init various config data based on device-tree */
|
|
err = emac_init_config(dev);
|
|
if (err != 0)
|
|
goto err_free;
|
|
|
|
/* Get interrupts. EMAC irq is mandatory, WOL irq is optional */
|
|
dev->emac_irq = irq_of_parse_and_map(np, 0);
|
|
dev->wol_irq = irq_of_parse_and_map(np, 1);
|
|
if (dev->emac_irq == NO_IRQ) {
|
|
printk(KERN_ERR "%s: Can't map main interrupt\n", np->full_name);
|
|
goto err_free;
|
|
}
|
|
ndev->irq = dev->emac_irq;
|
|
|
|
/* Map EMAC regs */
|
|
if (of_address_to_resource(np, 0, &dev->rsrc_regs)) {
|
|
printk(KERN_ERR "%s: Can't get registers address\n",
|
|
np->full_name);
|
|
goto err_irq_unmap;
|
|
}
|
|
// TODO : request_mem_region
|
|
dev->emacp = ioremap(dev->rsrc_regs.start,
|
|
dev->rsrc_regs.end - dev->rsrc_regs.start + 1);
|
|
if (dev->emacp == NULL) {
|
|
printk(KERN_ERR "%s: Can't map device registers!\n",
|
|
np->full_name);
|
|
err = -ENOMEM;
|
|
goto err_irq_unmap;
|
|
}
|
|
|
|
/* Wait for dependent devices */
|
|
err = emac_wait_deps(dev);
|
|
if (err) {
|
|
printk(KERN_ERR
|
|
"%s: Timeout waiting for dependent devices\n",
|
|
np->full_name);
|
|
/* display more info about what's missing ? */
|
|
goto err_reg_unmap;
|
|
}
|
|
dev->mal = dev_get_drvdata(&dev->mal_dev->dev);
|
|
if (dev->mdio_dev != NULL)
|
|
dev->mdio_instance = dev_get_drvdata(&dev->mdio_dev->dev);
|
|
|
|
/* Register with MAL */
|
|
dev->commac.ops = &emac_commac_ops;
|
|
dev->commac.dev = dev;
|
|
dev->commac.tx_chan_mask = MAL_CHAN_MASK(dev->mal_tx_chan);
|
|
dev->commac.rx_chan_mask = MAL_CHAN_MASK(dev->mal_rx_chan);
|
|
err = mal_register_commac(dev->mal, &dev->commac);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to register with mal %s!\n",
|
|
np->full_name, dev->mal_dev->node->full_name);
|
|
goto err_rel_deps;
|
|
}
|
|
dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
|
|
dev->rx_sync_size = emac_rx_sync_size(ndev->mtu);
|
|
|
|
/* Get pointers to BD rings */
|
|
dev->tx_desc =
|
|
dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, dev->mal_tx_chan);
|
|
dev->rx_desc =
|
|
dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, dev->mal_rx_chan);
|
|
|
|
DBG(dev, "tx_desc %p" NL, dev->tx_desc);
|
|
DBG(dev, "rx_desc %p" NL, dev->rx_desc);
|
|
|
|
/* Clean rings */
|
|
memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
|
|
memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
|
|
memset(dev->tx_skb, 0, NUM_TX_BUFF * sizeof(struct sk_buff *));
|
|
memset(dev->rx_skb, 0, NUM_RX_BUFF * sizeof(struct sk_buff *));
|
|
|
|
/* Attach to ZMII, if needed */
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) &&
|
|
(err = zmii_attach(dev->zmii_dev, dev->zmii_port, &dev->phy_mode)) != 0)
|
|
goto err_unreg_commac;
|
|
|
|
/* Attach to RGMII, if needed */
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII) &&
|
|
(err = rgmii_attach(dev->rgmii_dev, dev->rgmii_port, dev->phy_mode)) != 0)
|
|
goto err_detach_zmii;
|
|
|
|
/* Attach to TAH, if needed */
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) &&
|
|
(err = tah_attach(dev->tah_dev, dev->tah_port)) != 0)
|
|
goto err_detach_rgmii;
|
|
|
|
/* Set some link defaults before we can find out real parameters */
|
|
dev->phy.speed = SPEED_100;
|
|
dev->phy.duplex = DUPLEX_FULL;
|
|
dev->phy.autoneg = AUTONEG_DISABLE;
|
|
dev->phy.pause = dev->phy.asym_pause = 0;
|
|
dev->stop_timeout = STOP_TIMEOUT_100;
|
|
INIT_DELAYED_WORK(&dev->link_work, emac_link_timer);
|
|
|
|
/* Find PHY if any */
|
|
err = emac_init_phy(dev);
|
|
if (err != 0)
|
|
goto err_detach_tah;
|
|
|
|
if (dev->tah_dev)
|
|
ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
|
|
ndev->watchdog_timeo = 5 * HZ;
|
|
if (emac_phy_supports_gige(dev->phy_mode)) {
|
|
ndev->netdev_ops = &emac_gige_netdev_ops;
|
|
dev->commac.ops = &emac_commac_sg_ops;
|
|
} else
|
|
ndev->netdev_ops = &emac_netdev_ops;
|
|
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
|
|
|
|
netif_carrier_off(ndev);
|
|
netif_stop_queue(ndev);
|
|
|
|
err = register_netdev(ndev);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: failed to register net device (%d)!\n",
|
|
np->full_name, err);
|
|
goto err_detach_tah;
|
|
}
|
|
|
|
/* Set our drvdata last as we don't want them visible until we are
|
|
* fully initialized
|
|
*/
|
|
wmb();
|
|
dev_set_drvdata(&ofdev->dev, dev);
|
|
|
|
/* There's a new kid in town ! Let's tell everybody */
|
|
wake_up_all(&emac_probe_wait);
|
|
|
|
|
|
printk(KERN_INFO "%s: EMAC-%d %s, MAC %pM\n",
|
|
ndev->name, dev->cell_index, np->full_name, ndev->dev_addr);
|
|
|
|
if (dev->phy_mode == PHY_MODE_SGMII)
|
|
printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name);
|
|
|
|
if (dev->phy.address >= 0)
|
|
printk("%s: found %s PHY (0x%02x)\n", ndev->name,
|
|
dev->phy.def->name, dev->phy.address);
|
|
|
|
emac_dbg_register(dev);
|
|
|
|
/* Life is good */
|
|
return 0;
|
|
|
|
/* I have a bad feeling about this ... */
|
|
|
|
err_detach_tah:
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
|
|
tah_detach(dev->tah_dev, dev->tah_port);
|
|
err_detach_rgmii:
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
|
|
rgmii_detach(dev->rgmii_dev, dev->rgmii_port);
|
|
err_detach_zmii:
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
|
|
zmii_detach(dev->zmii_dev, dev->zmii_port);
|
|
err_unreg_commac:
|
|
mal_unregister_commac(dev->mal, &dev->commac);
|
|
err_rel_deps:
|
|
emac_put_deps(dev);
|
|
err_reg_unmap:
|
|
iounmap(dev->emacp);
|
|
err_irq_unmap:
|
|
if (dev->wol_irq != NO_IRQ)
|
|
irq_dispose_mapping(dev->wol_irq);
|
|
if (dev->emac_irq != NO_IRQ)
|
|
irq_dispose_mapping(dev->emac_irq);
|
|
err_free:
|
|
kfree(ndev);
|
|
err_gone:
|
|
/* if we were on the bootlist, remove us as we won't show up and
|
|
* wake up all waiters to notify them in case they were waiting
|
|
* on us
|
|
*/
|
|
if (blist) {
|
|
*blist = NULL;
|
|
wake_up_all(&emac_probe_wait);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int __devexit emac_remove(struct of_device *ofdev)
|
|
{
|
|
struct emac_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
DBG(dev, "remove" NL);
|
|
|
|
dev_set_drvdata(&ofdev->dev, NULL);
|
|
|
|
unregister_netdev(dev->ndev);
|
|
|
|
flush_scheduled_work();
|
|
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
|
|
tah_detach(dev->tah_dev, dev->tah_port);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII))
|
|
rgmii_detach(dev->rgmii_dev, dev->rgmii_port);
|
|
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
|
|
zmii_detach(dev->zmii_dev, dev->zmii_port);
|
|
|
|
mal_unregister_commac(dev->mal, &dev->commac);
|
|
emac_put_deps(dev);
|
|
|
|
emac_dbg_unregister(dev);
|
|
iounmap(dev->emacp);
|
|
|
|
if (dev->wol_irq != NO_IRQ)
|
|
irq_dispose_mapping(dev->wol_irq);
|
|
if (dev->emac_irq != NO_IRQ)
|
|
irq_dispose_mapping(dev->emac_irq);
|
|
|
|
kfree(dev->ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* XXX Features in here should be replaced by properties... */
|
|
static struct of_device_id emac_match[] =
|
|
{
|
|
{
|
|
.type = "network",
|
|
.compatible = "ibm,emac",
|
|
},
|
|
{
|
|
.type = "network",
|
|
.compatible = "ibm,emac4",
|
|
},
|
|
{
|
|
.type = "network",
|
|
.compatible = "ibm,emac4sync",
|
|
},
|
|
{},
|
|
};
|
|
|
|
static struct of_platform_driver emac_driver = {
|
|
.name = "emac",
|
|
.match_table = emac_match,
|
|
|
|
.probe = emac_probe,
|
|
.remove = emac_remove,
|
|
};
|
|
|
|
static void __init emac_make_bootlist(void)
|
|
{
|
|
struct device_node *np = NULL;
|
|
int j, max, i = 0, k;
|
|
int cell_indices[EMAC_BOOT_LIST_SIZE];
|
|
|
|
/* Collect EMACs */
|
|
while((np = of_find_all_nodes(np)) != NULL) {
|
|
const u32 *idx;
|
|
|
|
if (of_match_node(emac_match, np) == NULL)
|
|
continue;
|
|
if (of_get_property(np, "unused", NULL))
|
|
continue;
|
|
idx = of_get_property(np, "cell-index", NULL);
|
|
if (idx == NULL)
|
|
continue;
|
|
cell_indices[i] = *idx;
|
|
emac_boot_list[i++] = of_node_get(np);
|
|
if (i >= EMAC_BOOT_LIST_SIZE) {
|
|
of_node_put(np);
|
|
break;
|
|
}
|
|
}
|
|
max = i;
|
|
|
|
/* Bubble sort them (doh, what a creative algorithm :-) */
|
|
for (i = 0; max > 1 && (i < (max - 1)); i++)
|
|
for (j = i; j < max; j++) {
|
|
if (cell_indices[i] > cell_indices[j]) {
|
|
np = emac_boot_list[i];
|
|
emac_boot_list[i] = emac_boot_list[j];
|
|
emac_boot_list[j] = np;
|
|
k = cell_indices[i];
|
|
cell_indices[i] = cell_indices[j];
|
|
cell_indices[j] = k;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int __init emac_init(void)
|
|
{
|
|
int rc;
|
|
|
|
printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
|
|
|
|
/* Init debug stuff */
|
|
emac_init_debug();
|
|
|
|
/* Build EMAC boot list */
|
|
emac_make_bootlist();
|
|
|
|
/* Init submodules */
|
|
rc = mal_init();
|
|
if (rc)
|
|
goto err;
|
|
rc = zmii_init();
|
|
if (rc)
|
|
goto err_mal;
|
|
rc = rgmii_init();
|
|
if (rc)
|
|
goto err_zmii;
|
|
rc = tah_init();
|
|
if (rc)
|
|
goto err_rgmii;
|
|
rc = of_register_platform_driver(&emac_driver);
|
|
if (rc)
|
|
goto err_tah;
|
|
|
|
return 0;
|
|
|
|
err_tah:
|
|
tah_exit();
|
|
err_rgmii:
|
|
rgmii_exit();
|
|
err_zmii:
|
|
zmii_exit();
|
|
err_mal:
|
|
mal_exit();
|
|
err:
|
|
return rc;
|
|
}
|
|
|
|
static void __exit emac_exit(void)
|
|
{
|
|
int i;
|
|
|
|
of_unregister_platform_driver(&emac_driver);
|
|
|
|
tah_exit();
|
|
rgmii_exit();
|
|
zmii_exit();
|
|
mal_exit();
|
|
emac_fini_debug();
|
|
|
|
/* Destroy EMAC boot list */
|
|
for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++)
|
|
if (emac_boot_list[i])
|
|
of_node_put(emac_boot_list[i]);
|
|
}
|
|
|
|
module_init(emac_init);
|
|
module_exit(emac_exit);
|