Zhang Rui 16e95a62ee powercap: intel_rapl: Fix a sparse warning in TPMI interface ... Depends on the interface used, the RAPL registers can be either MSR indexes or memory mapped IO addresses. Current RAPL common code uses u64 to save both MSR and memory mapped IO registers. With this, when handling register address with an __iomem annotation, it triggers a sparse warning like below: sparse warnings: (new ones prefixed by >>) >> drivers/powercap/intel_rapl_tpmi.c:141:41: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected unsigned long long [usertype] *tpmi_rapl_regs @@ got void [noderef] __iomem * @@ drivers/powercap/intel_rapl_tpmi.c:141:41: sparse: expected unsigned long long [usertype] *tpmi_rapl_regs drivers/powercap/intel_rapl_tpmi.c:141:41: sparse: got void [noderef] __iomem * Fix the problem by using a union to save the registers instead. Suggested-by: David Laight <David.Laight@ACULAB.COM> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307031405.dy3druuy-lkp@intel.com/ Tested-by: Wang Wendy <wendy.wang@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>		2023-08-01 13:45:08 +02:00
..
broadcom	thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister	2023-04-07 18:36:28 +02:00
intel	powercap: intel_rapl: Fix a sparse warning in TPMI interface	2023-08-01 13:45:08 +02:00
mediatek	thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()	2023-06-26 12:03:14 +02:00
qcom	thermal/drivers/qcom/temp-alarm: Use dev_err_probe	2023-06-26 12:10:22 +02:00
samsung	thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers	2023-03-03 20:45:02 +01:00
st	thermal/drivers/stm32: Convert to platform remove callback returning void	2023-06-26 12:03:14 +02:00
tegra	thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()	2023-06-26 12:03:14 +02:00
ti-soc-thermal	thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()	2023-06-26 12:03:14 +02:00
amlogic_thermal.c	thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()	2023-06-26 12:03:14 +02:00
armada_thermal.c	thermal/drivers/armada: Add support for AP807 thermal data	2023-06-26 12:03:14 +02:00
cpufreq_cooling.c	- Add more thermal zone device encapsulation: prevent setting	2023-04-03 20:43:32 +02:00
cpuidle_cooling.c	More thermal control updates for 6.4-rc1	2023-05-03 11:46:01 -07:00
da9062-thermal.c	thermal/drivers/da9062: Don't access the thermal zone device fields	2023-03-03 20:45:03 +01:00
db8500_thermal.c	thermal/drivers/db8500: Use driver dev instead of tz->device	2023-04-01 20:51:45 +02:00
devfreq_cooling.c	thermal/core: Relocate the traces definition in thermal directory	2023-04-01 20:51:45 +02:00
dove_thermal.c	thermal: Remove debug or error messages in get_temp() ops	2023-03-03 20:45:02 +01:00
gov_bang_bang.c	thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions	2023-01-06 14:14:47 +01:00
gov_fair_share.c	thermal/core: Relocate the traces definition in thermal directory	2023-04-01 20:51:45 +02:00
gov_power_allocator.c	thermal/core: Relocate the traces definition in thermal directory	2023-04-01 20:51:45 +02:00
gov_step_wise.c	thermal: gov_step_wise: Adjust code logic to match comment	2023-04-27 19:17:11 +02:00
gov_user_space.c	thermal: gov_user_space: Do not lock thermal zone mutex	2022-08-30 20:18:47 +02:00
hisi_thermal.c	thermal/drivers/hisi: Use devm_platform_ioremap_resource()	2023-04-01 20:51:45 +02:00
imx8mm_thermal.c	thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()	2023-06-26 12:03:14 +02:00
imx_sc_thermal.c	thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()	2023-06-26 12:03:14 +02:00
imx_thermal.c	- Add more thermal zone device encapsulation: prevent setting	2023-04-03 20:43:32 +02:00
k3_bandgap.c	drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()	2023-06-26 12:03:14 +02:00
k3_j72xx_bandgap.c	thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers	2023-03-03 20:45:02 +01:00
Kconfig	thermal: Allow selecting the bang-bang governor as default	2023-06-26 12:03:13 +02:00
khadas_mcu_fan.c	thermal/core: Make cooling device state change private	2021-01-19 22:31:10 +01:00
kirkwood_thermal.c	thermal: Remove debug or error messages in get_temp() ops	2023-03-03 20:45:02 +01:00
Makefile	thermal/core: Relocate the traces definition in thermal directory	2023-04-01 20:51:45 +02:00
max77620_thermal.c	thermal: Remove debug or error messages in get_temp() ops	2023-03-03 20:45:02 +01:00
qoriq_thermal.c	thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()	2023-06-26 12:03:14 +02:00
rcar_gen3_thermal.c	drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4	2023-06-26 12:03:13 +02:00
rcar_thermal.c	thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()	2023-03-03 20:45:02 +01:00
rockchip_thermal.c	thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()	2023-04-07 10:31:33 +02:00
rzg2l_thermal.c	thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()	2023-03-03 20:45:02 +01:00
spear_thermal.c	thermal/drivers/spear: Don't use tz->device but pdev->dev	2023-03-03 20:45:02 +01:00
sprd_thermal.c	thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers	2023-03-03 20:45:02 +01:00
sun8i_thermal.c	thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()	2023-06-26 12:03:14 +02:00
thermal_acpi.c	thermal: ACPI: Make helpers retrieve temperature only	2023-02-02 15:26:45 +01:00
thermal_core.c	thermal: core: constify params in thermal_zone_device_register	2023-07-24 09:51:31 +02:00
thermal_core.h	thermal: Allow selecting the bang-bang governor as default	2023-06-26 12:03:13 +02:00
thermal_helpers.c	thermal/core: Relocate the traces definition in thermal directory	2023-04-01 20:51:45 +02:00
thermal_hwmon.c	thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()	2023-06-26 12:03:14 +02:00
thermal_hwmon.h	thermal/hwmon: Use the right device for devm_thermal_add_hwmon_sysfs()	2023-03-03 20:45:02 +01:00
thermal_mmio.c	thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers	2023-03-03 20:45:02 +01:00
thermal_netlink.c	thermal/core: Fix unregistering netlink at thermal init time	2023-01-25 16:40:39 +01:00
thermal_netlink.h	thermal/core: Fix unregistering netlink at thermal init time	2023-01-25 16:40:39 +01:00
thermal_of.c	thermal: of: fix double-free on unregistration	2023-07-24 09:51:31 +02:00
thermal_sysfs.c	thermal: core: Drop excessive lockdep_assert_held() calls	2023-03-28 20:49:47 +02:00
thermal_trace_ipa.h	thermal/core: Relocate the traces definition in thermal directory	2023-04-01 20:51:45 +02:00
thermal_trace.h	thermal/core: Relocate the traces definition in thermal directory	2023-04-01 20:51:45 +02:00
thermal_trip.c	thermal/core: Move the thermal trip code to a dedicated file	2023-01-25 16:40:39 +01:00
thermal-generic-adc.c	thermal/drivers/generic-adc: Register thermal zones as hwmon sensors	2023-06-26 12:03:14 +02:00
uniphier_thermal.c	thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers	2023-03-03 20:45:02 +01:00