linux/drivers/scsi/qla2xxx/qla_iocb.c
Andrew Vasquez 4fdfefe529 [SCSI] qla2xxx: Add support to dynamically enable/disable ZIO.
ISP23xx and ISP24xx chips have support for an adaptive
method of posting SCSI command completions for multiple SCSI
commands during a single system interrupt.

SCSI commands are placed on the system response queue
without interrupting the host until 1) a delay timer
expires; or 2) a SCSI command completes with an error.

As long as the host software (qla2xxx) services the response
queue for completions (this polling is done during
queuecommand()) within the 'delay timer' period, the
firmware will not generate system interrupt.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 11:52:11 -05:00

906 lines
23 KiB
C

/******************************************************************************
* QLOGIC LINUX SOFTWARE
*
* QLogic ISP2x00 device driver for Linux 2.6.x
* Copyright (C) 2003-2005 QLogic Corporation
* (www.qlogic.com)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
******************************************************************************/
#include "qla_def.h"
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_tcq.h>
static inline uint16_t qla2x00_get_cmd_direction(struct scsi_cmnd *cmd);
static inline cont_entry_t *qla2x00_prep_cont_type0_iocb(scsi_qla_host_t *);
static inline cont_a64_entry_t *qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *);
static request_t *qla2x00_req_pkt(scsi_qla_host_t *ha);
/**
* qla2x00_get_cmd_direction() - Determine control_flag data direction.
* @cmd: SCSI command
*
* Returns the proper CF_* direction based on CDB.
*/
static inline uint16_t
qla2x00_get_cmd_direction(struct scsi_cmnd *cmd)
{
uint16_t cflags;
cflags = 0;
/* Set transfer direction */
if (cmd->sc_data_direction == DMA_TO_DEVICE)
cflags = CF_WRITE;
else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
cflags = CF_READ;
return (cflags);
}
/**
* qla2x00_calc_iocbs_32() - Determine number of Command Type 2 and
* Continuation Type 0 IOCBs to allocate.
*
* @dsds: number of data segment decriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
*/
uint16_t
qla2x00_calc_iocbs_32(uint16_t dsds)
{
uint16_t iocbs;
iocbs = 1;
if (dsds > 3) {
iocbs += (dsds - 3) / 7;
if ((dsds - 3) % 7)
iocbs++;
}
return (iocbs);
}
/**
* qla2x00_calc_iocbs_64() - Determine number of Command Type 3 and
* Continuation Type 1 IOCBs to allocate.
*
* @dsds: number of data segment decriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
*/
uint16_t
qla2x00_calc_iocbs_64(uint16_t dsds)
{
uint16_t iocbs;
iocbs = 1;
if (dsds > 2) {
iocbs += (dsds - 2) / 5;
if ((dsds - 2) % 5)
iocbs++;
}
return (iocbs);
}
/**
* qla2x00_prep_cont_type0_iocb() - Initialize a Continuation Type 0 IOCB.
* @ha: HA context
*
* Returns a pointer to the Continuation Type 0 IOCB packet.
*/
static inline cont_entry_t *
qla2x00_prep_cont_type0_iocb(scsi_qla_host_t *ha)
{
cont_entry_t *cont_pkt;
/* Adjust ring index. */
ha->req_ring_index++;
if (ha->req_ring_index == ha->request_q_length) {
ha->req_ring_index = 0;
ha->request_ring_ptr = ha->request_ring;
} else {
ha->request_ring_ptr++;
}
cont_pkt = (cont_entry_t *)ha->request_ring_ptr;
/* Load packet defaults. */
*((uint32_t *)(&cont_pkt->entry_type)) =
__constant_cpu_to_le32(CONTINUE_TYPE);
return (cont_pkt);
}
/**
* qla2x00_prep_cont_type1_iocb() - Initialize a Continuation Type 1 IOCB.
* @ha: HA context
*
* Returns a pointer to the continuation type 1 IOCB packet.
*/
static inline cont_a64_entry_t *
qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *ha)
{
cont_a64_entry_t *cont_pkt;
/* Adjust ring index. */
ha->req_ring_index++;
if (ha->req_ring_index == ha->request_q_length) {
ha->req_ring_index = 0;
ha->request_ring_ptr = ha->request_ring;
} else {
ha->request_ring_ptr++;
}
cont_pkt = (cont_a64_entry_t *)ha->request_ring_ptr;
/* Load packet defaults. */
*((uint32_t *)(&cont_pkt->entry_type)) =
__constant_cpu_to_le32(CONTINUE_A64_TYPE);
return (cont_pkt);
}
/**
* qla2x00_build_scsi_iocbs_32() - Build IOCB command utilizing 32bit
* capable IOCB types.
*
* @sp: SRB command to process
* @cmd_pkt: Command type 2 IOCB
* @tot_dsds: Total number of segments to transfer
*/
void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
uint16_t tot_dsds)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
scsi_qla_host_t *ha;
struct scsi_cmnd *cmd;
cmd = sp->cmd;
/* Update entry type to indicate Command Type 2 IOCB */
*((uint32_t *)(&cmd_pkt->entry_type)) =
__constant_cpu_to_le32(COMMAND_TYPE);
/* No data transfer */
if (cmd->request_bufflen == 0 || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = __constant_cpu_to_le32(0);
return;
}
ha = sp->ha;
cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(cmd));
/* Three DSDs are available in the Command Type 2 IOCB */
avail_dsds = 3;
cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address;
/* Load data segments */
if (cmd->use_sg != 0) {
struct scatterlist *cur_seg;
struct scatterlist *end_seg;
cur_seg = (struct scatterlist *)cmd->request_buffer;
end_seg = cur_seg + tot_dsds;
while (cur_seg < end_seg) {
cont_entry_t *cont_pkt;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
/*
* Seven DSDs are available in the Continuation
* Type 0 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type0_iocb(ha);
cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address;
avail_dsds = 7;
}
*cur_dsd++ = cpu_to_le32(sg_dma_address(cur_seg));
*cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg));
avail_dsds--;
cur_seg++;
}
} else {
*cur_dsd++ = cpu_to_le32(sp->dma_handle);
*cur_dsd++ = cpu_to_le32(cmd->request_bufflen);
}
}
/**
* qla2x00_build_scsi_iocbs_64() - Build IOCB command utilizing 64bit
* capable IOCB types.
*
* @sp: SRB command to process
* @cmd_pkt: Command type 3 IOCB
* @tot_dsds: Total number of segments to transfer
*/
void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
uint16_t tot_dsds)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
scsi_qla_host_t *ha;
struct scsi_cmnd *cmd;
cmd = sp->cmd;
/* Update entry type to indicate Command Type 3 IOCB */
*((uint32_t *)(&cmd_pkt->entry_type)) =
__constant_cpu_to_le32(COMMAND_A64_TYPE);
/* No data transfer */
if (cmd->request_bufflen == 0 || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = __constant_cpu_to_le32(0);
return;
}
ha = sp->ha;
cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(cmd));
/* Two DSDs are available in the Command Type 3 IOCB */
avail_dsds = 2;
cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address;
/* Load data segments */
if (cmd->use_sg != 0) {
struct scatterlist *cur_seg;
struct scatterlist *end_seg;
cur_seg = (struct scatterlist *)cmd->request_buffer;
end_seg = cur_seg + tot_dsds;
while (cur_seg < end_seg) {
dma_addr_t sle_dma;
cont_a64_entry_t *cont_pkt;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
/*
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(ha);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
sle_dma = sg_dma_address(cur_seg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg));
avail_dsds--;
cur_seg++;
}
} else {
*cur_dsd++ = cpu_to_le32(LSD(sp->dma_handle));
*cur_dsd++ = cpu_to_le32(MSD(sp->dma_handle));
*cur_dsd++ = cpu_to_le32(cmd->request_bufflen);
}
}
/**
* qla2x00_start_scsi() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
* Returns non-zero if a failure occured, else zero.
*/
int
qla2x00_start_scsi(srb_t *sp)
{
int ret;
unsigned long flags;
scsi_qla_host_t *ha;
struct scsi_cmnd *cmd;
uint32_t *clr_ptr;
uint32_t index;
uint32_t handle;
cmd_entry_t *cmd_pkt;
struct scatterlist *sg;
uint16_t cnt;
uint16_t req_cnt;
uint16_t tot_dsds;
struct device_reg_2xxx __iomem *reg;
char tag[2];
/* Setup device pointers. */
ret = 0;
ha = sp->ha;
reg = &ha->iobase->isp;
cmd = sp->cmd;
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
/* Send marker if required */
if (ha->marker_needed != 0) {
if (qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS) {
return (QLA_FUNCTION_FAILED);
}
ha->marker_needed = 0;
}
/* Acquire ring specific lock */
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Check for room in outstanding command list. */
handle = ha->current_outstanding_cmd;
for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
handle++;
if (handle == MAX_OUTSTANDING_COMMANDS)
handle = 1;
if (ha->outstanding_cmds[handle] == 0)
break;
}
if (index == MAX_OUTSTANDING_COMMANDS)
goto queuing_error;
/* Map the sg table so we have an accurate count of sg entries needed */
if (cmd->use_sg) {
sg = (struct scatterlist *) cmd->request_buffer;
tot_dsds = pci_map_sg(ha->pdev, sg, cmd->use_sg,
cmd->sc_data_direction);
if (tot_dsds == 0)
goto queuing_error;
} else if (cmd->request_bufflen) {
dma_addr_t req_dma;
req_dma = pci_map_single(ha->pdev, cmd->request_buffer,
cmd->request_bufflen, cmd->sc_data_direction);
if (dma_mapping_error(req_dma))
goto queuing_error;
sp->dma_handle = req_dma;
tot_dsds = 1;
}
/* Calculate the number of request entries needed. */
req_cnt = ha->isp_ops.calc_req_entries(tot_dsds);
if (ha->req_q_cnt < (req_cnt + 2)) {
cnt = RD_REG_WORD_RELAXED(ISP_REQ_Q_OUT(ha, reg));
if (ha->req_ring_index < cnt)
ha->req_q_cnt = cnt - ha->req_ring_index;
else
ha->req_q_cnt = ha->request_q_length -
(ha->req_ring_index - cnt);
}
if (ha->req_q_cnt < (req_cnt + 2))
goto queuing_error;
/* Build command packet */
ha->current_outstanding_cmd = handle;
ha->outstanding_cmds[handle] = sp;
sp->ha = ha;
sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
ha->req_q_cnt -= req_cnt;
cmd_pkt = (cmd_entry_t *)ha->request_ring_ptr;
cmd_pkt->handle = handle;
/* Zero out remaining portion of packet. */
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Set target ID and LUN number*/
SET_TARGET_ID(ha, cmd_pkt->target, sp->fcport->loop_id);
cmd_pkt->lun = cpu_to_le16(sp->cmd->device->lun);
/* Update tagged queuing modifier */
cmd_pkt->control_flags = __constant_cpu_to_le16(CF_SIMPLE_TAG);
if (scsi_populate_tag_msg(cmd, tag)) {
switch (tag[0]) {
case MSG_HEAD_TAG:
cmd_pkt->control_flags =
__constant_cpu_to_le16(CF_HEAD_TAG);
break;
case MSG_ORDERED_TAG:
cmd_pkt->control_flags =
__constant_cpu_to_le16(CF_ORDERED_TAG);
break;
}
}
/* Load SCSI command packet. */
memcpy(cmd_pkt->scsi_cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->byte_count = cpu_to_le32((uint32_t)cmd->request_bufflen);
/* Build IOCB segments */
ha->isp_ops.build_iocbs(sp, cmd_pkt, tot_dsds);
/* Set total data segment count. */
cmd_pkt->entry_count = (uint8_t)req_cnt;
wmb();
/* Adjust ring index. */
ha->req_ring_index++;
if (ha->req_ring_index == ha->request_q_length) {
ha->req_ring_index = 0;
ha->request_ring_ptr = ha->request_ring;
} else
ha->request_ring_ptr++;
sp->flags |= SRB_DMA_VALID;
sp->state = SRB_ACTIVE_STATE;
/* Set chip new ring index. */
WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), ha->req_ring_index);
RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, reg)); /* PCI Posting. */
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (ha->flags.process_response_queue &&
ha->response_ring_ptr->signature != RESPONSE_PROCESSED)
qla2x00_process_response_queue(ha);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return (QLA_SUCCESS);
queuing_error:
if (cmd->use_sg && tot_dsds) {
sg = (struct scatterlist *) cmd->request_buffer;
pci_unmap_sg(ha->pdev, sg, cmd->use_sg,
cmd->sc_data_direction);
} else if (tot_dsds) {
pci_unmap_single(ha->pdev, sp->dma_handle,
cmd->request_bufflen, cmd->sc_data_direction);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return (QLA_FUNCTION_FAILED);
}
/**
* qla2x00_marker() - Send a marker IOCB to the firmware.
* @ha: HA context
* @loop_id: loop ID
* @lun: LUN
* @type: marker modifier
*
* Can be called from both normal and interrupt context.
*
* Returns non-zero if a failure occured, else zero.
*/
int
__qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun,
uint8_t type)
{
mrk_entry_t *mrk;
struct mrk_entry_24xx *mrk24;
mrk24 = NULL;
mrk = (mrk_entry_t *)qla2x00_req_pkt(ha);
if (mrk == NULL) {
DEBUG2_3(printk("%s(%ld): failed to allocate Marker IOCB.\n",
__func__, ha->host_no));
return (QLA_FUNCTION_FAILED);
}
mrk->entry_type = MARKER_TYPE;
mrk->modifier = type;
if (type != MK_SYNC_ALL) {
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
mrk24 = (struct mrk_entry_24xx *) mrk;
mrk24->nport_handle = cpu_to_le16(loop_id);
mrk24->lun[1] = LSB(lun);
mrk24->lun[2] = MSB(lun);
} else {
SET_TARGET_ID(ha, mrk->target, loop_id);
mrk->lun = cpu_to_le16(lun);
}
}
wmb();
qla2x00_isp_cmd(ha);
return (QLA_SUCCESS);
}
int
qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun,
uint8_t type)
{
int ret;
unsigned long flags = 0;
spin_lock_irqsave(&ha->hardware_lock, flags);
ret = __qla2x00_marker(ha, loop_id, lun, type);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return (ret);
}
/**
* qla2x00_req_pkt() - Retrieve a request packet from the request ring.
* @ha: HA context
*
* Note: The caller must hold the hardware lock before calling this routine.
*
* Returns NULL if function failed, else, a pointer to the request packet.
*/
static request_t *
qla2x00_req_pkt(scsi_qla_host_t *ha)
{
device_reg_t __iomem *reg = ha->iobase;
request_t *pkt = NULL;
uint16_t cnt;
uint32_t *dword_ptr;
uint32_t timer;
uint16_t req_cnt = 1;
/* Wait 1 second for slot. */
for (timer = HZ; timer; timer--) {
if ((req_cnt + 2) >= ha->req_q_cnt) {
/* Calculate number of free request entries. */
if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
cnt = (uint16_t)RD_REG_DWORD(
&reg->isp24.req_q_out);
else
cnt = qla2x00_debounce_register(
ISP_REQ_Q_OUT(ha, &reg->isp));
if (ha->req_ring_index < cnt)
ha->req_q_cnt = cnt - ha->req_ring_index;
else
ha->req_q_cnt = ha->request_q_length -
(ha->req_ring_index - cnt);
}
/* If room for request in request ring. */
if ((req_cnt + 2) < ha->req_q_cnt) {
ha->req_q_cnt--;
pkt = ha->request_ring_ptr;
/* Zero out packet. */
dword_ptr = (uint32_t *)pkt;
for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++)
*dword_ptr++ = 0;
/* Set system defined field. */
pkt->sys_define = (uint8_t)ha->req_ring_index;
/* Set entry count. */
pkt->entry_count = 1;
break;
}
/* Release ring specific lock */
spin_unlock(&ha->hardware_lock);
udelay(2); /* 2 us */
/* Check for pending interrupts. */
/* During init we issue marker directly */
if (!ha->marker_needed)
qla2x00_poll(ha);
spin_lock_irq(&ha->hardware_lock);
}
if (!pkt) {
DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
}
return (pkt);
}
/**
* qla2x00_isp_cmd() - Modify the request ring pointer.
* @ha: HA context
*
* Note: The caller must hold the hardware lock before calling this routine.
*/
void
qla2x00_isp_cmd(scsi_qla_host_t *ha)
{
device_reg_t __iomem *reg = ha->iobase;
DEBUG5(printk("%s(): IOCB data:\n", __func__));
DEBUG5(qla2x00_dump_buffer(
(uint8_t *)ha->request_ring_ptr, REQUEST_ENTRY_SIZE));
/* Adjust ring index. */
ha->req_ring_index++;
if (ha->req_ring_index == ha->request_q_length) {
ha->req_ring_index = 0;
ha->request_ring_ptr = ha->request_ring;
} else
ha->request_ring_ptr++;
/* Set chip new ring index. */
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
WRT_REG_DWORD(&reg->isp24.req_q_in, ha->req_ring_index);
RD_REG_DWORD_RELAXED(&reg->isp24.req_q_in);
} else {
WRT_REG_WORD(ISP_REQ_Q_IN(ha, &reg->isp), ha->req_ring_index);
RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, &reg->isp));
}
}
/**
* qla24xx_calc_iocbs() - Determine number of Command Type 3 and
* Continuation Type 1 IOCBs to allocate.
*
* @dsds: number of data segment decriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
*/
static inline uint16_t
qla24xx_calc_iocbs(uint16_t dsds)
{
uint16_t iocbs;
iocbs = 1;
if (dsds > 1) {
iocbs += (dsds - 1) / 5;
if ((dsds - 1) % 5)
iocbs++;
}
return iocbs;
}
/**
* qla24xx_build_scsi_iocbs() - Build IOCB command utilizing Command Type 7
* IOCB types.
*
* @sp: SRB command to process
* @cmd_pkt: Command type 3 IOCB
* @tot_dsds: Total number of segments to transfer
*/
static inline void
qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
uint16_t tot_dsds)
{
uint16_t avail_dsds;
uint32_t *cur_dsd;
scsi_qla_host_t *ha;
struct scsi_cmnd *cmd;
cmd = sp->cmd;
/* Update entry type to indicate Command Type 3 IOCB */
*((uint32_t *)(&cmd_pkt->entry_type)) =
__constant_cpu_to_le32(COMMAND_TYPE_7);
/* No data transfer */
if (cmd->request_bufflen == 0 || cmd->sc_data_direction == DMA_NONE) {
cmd_pkt->byte_count = __constant_cpu_to_le32(0);
return;
}
ha = sp->ha;
/* Set transfer direction */
if (cmd->sc_data_direction == DMA_TO_DEVICE)
cmd_pkt->task_mgmt_flags =
__constant_cpu_to_le16(TMF_WRITE_DATA);
else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
cmd_pkt->task_mgmt_flags =
__constant_cpu_to_le16(TMF_READ_DATA);
/* One DSD is available in the Command Type 3 IOCB */
avail_dsds = 1;
cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address;
/* Load data segments */
if (cmd->use_sg != 0) {
struct scatterlist *cur_seg;
struct scatterlist *end_seg;
cur_seg = (struct scatterlist *)cmd->request_buffer;
end_seg = cur_seg + tot_dsds;
while (cur_seg < end_seg) {
dma_addr_t sle_dma;
cont_a64_entry_t *cont_pkt;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
/*
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(ha);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
sle_dma = sg_dma_address(cur_seg);
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg));
avail_dsds--;
cur_seg++;
}
} else {
*cur_dsd++ = cpu_to_le32(LSD(sp->dma_handle));
*cur_dsd++ = cpu_to_le32(MSD(sp->dma_handle));
*cur_dsd++ = cpu_to_le32(cmd->request_bufflen);
}
}
/**
* qla24xx_start_scsi() - Send a SCSI command to the ISP
* @sp: command to send to the ISP
*
* Returns non-zero if a failure occured, else zero.
*/
int
qla24xx_start_scsi(srb_t *sp)
{
int ret;
unsigned long flags;
scsi_qla_host_t *ha;
struct scsi_cmnd *cmd;
uint32_t *clr_ptr;
uint32_t index;
uint32_t handle;
struct cmd_type_7 *cmd_pkt;
struct scatterlist *sg;
uint16_t cnt;
uint16_t req_cnt;
uint16_t tot_dsds;
struct device_reg_24xx __iomem *reg;
char tag[2];
/* Setup device pointers. */
ret = 0;
ha = sp->ha;
reg = &ha->iobase->isp24;
cmd = sp->cmd;
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
/* Send marker if required */
if (ha->marker_needed != 0) {
if (qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS) {
return QLA_FUNCTION_FAILED;
}
ha->marker_needed = 0;
}
/* Acquire ring specific lock */
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Check for room in outstanding command list. */
handle = ha->current_outstanding_cmd;
for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
handle++;
if (handle == MAX_OUTSTANDING_COMMANDS)
handle = 1;
if (ha->outstanding_cmds[handle] == 0)
break;
}
if (index == MAX_OUTSTANDING_COMMANDS)
goto queuing_error;
/* Map the sg table so we have an accurate count of sg entries needed */
if (cmd->use_sg) {
sg = (struct scatterlist *) cmd->request_buffer;
tot_dsds = pci_map_sg(ha->pdev, sg, cmd->use_sg,
cmd->sc_data_direction);
if (tot_dsds == 0)
goto queuing_error;
} else if (cmd->request_bufflen) {
dma_addr_t req_dma;
req_dma = pci_map_single(ha->pdev, cmd->request_buffer,
cmd->request_bufflen, cmd->sc_data_direction);
if (dma_mapping_error(req_dma))
goto queuing_error;
sp->dma_handle = req_dma;
tot_dsds = 1;
}
req_cnt = qla24xx_calc_iocbs(tot_dsds);
if (ha->req_q_cnt < (req_cnt + 2)) {
cnt = (uint16_t)RD_REG_DWORD_RELAXED(&reg->req_q_out);
if (ha->req_ring_index < cnt)
ha->req_q_cnt = cnt - ha->req_ring_index;
else
ha->req_q_cnt = ha->request_q_length -
(ha->req_ring_index - cnt);
}
if (ha->req_q_cnt < (req_cnt + 2))
goto queuing_error;
/* Build command packet. */
ha->current_outstanding_cmd = handle;
ha->outstanding_cmds[handle] = sp;
sp->ha = ha;
sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
ha->req_q_cnt -= req_cnt;
cmd_pkt = (struct cmd_type_7 *)ha->request_ring_ptr;
cmd_pkt->handle = handle;
/* Zero out remaining portion of packet. */
clr_ptr = (uint32_t *)cmd_pkt + 2;
memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
/* Set NPORT-ID and LUN number*/
cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa;
cmd_pkt->port_id[1] = sp->fcport->d_id.b.area;
cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
cmd_pkt->lun[1] = LSB(sp->cmd->device->lun);
cmd_pkt->lun[2] = MSB(sp->cmd->device->lun);
/* Update tagged queuing modifier -- default is TSK_SIMPLE (0). */
if (scsi_populate_tag_msg(cmd, tag)) {
switch (tag[0]) {
case MSG_HEAD_TAG:
cmd_pkt->task = TSK_HEAD_OF_QUEUE;
break;
case MSG_ORDERED_TAG:
cmd_pkt->task = TSK_ORDERED;
break;
}
}
/* Load SCSI command packet. */
memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb));
cmd_pkt->byte_count = cpu_to_le32((uint32_t)cmd->request_bufflen);
/* Build IOCB segments */
qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds);
/* Set total data segment count. */
cmd_pkt->entry_count = (uint8_t)req_cnt;
wmb();
/* Adjust ring index. */
ha->req_ring_index++;
if (ha->req_ring_index == ha->request_q_length) {
ha->req_ring_index = 0;
ha->request_ring_ptr = ha->request_ring;
} else
ha->request_ring_ptr++;
sp->flags |= SRB_DMA_VALID;
sp->state = SRB_ACTIVE_STATE;
/* Set chip new ring index. */
WRT_REG_DWORD(&reg->req_q_in, ha->req_ring_index);
RD_REG_DWORD_RELAXED(&reg->req_q_in); /* PCI Posting. */
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (ha->flags.process_response_queue &&
ha->response_ring_ptr->signature != RESPONSE_PROCESSED)
qla24xx_process_response_queue(ha);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
queuing_error:
if (cmd->use_sg && tot_dsds) {
sg = (struct scatterlist *) cmd->request_buffer;
pci_unmap_sg(ha->pdev, sg, cmd->use_sg,
cmd->sc_data_direction);
} else if (tot_dsds) {
pci_unmap_single(ha->pdev, sp->dma_handle,
cmd->request_bufflen, cmd->sc_data_direction);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_FUNCTION_FAILED;
}