mirror of
https://github.com/torvalds/linux.git
synced 2024-12-18 09:02:17 +00:00
a36e9a1c5f
Implements OF support and convert to of_mm_gpio. By attaching hardware latches to the External Bus Unit (EBU) on Lantiq SoC, it is possible to create output only gpios. This driver configures a special memory address, which when written to, outputs 16 bit to the latches. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
39 lines
1.2 KiB
Plaintext
39 lines
1.2 KiB
Plaintext
Lantiq SoC External Bus memory mapped GPIO controller
|
|
|
|
By attaching hardware latches to the EBU it is possible to create output
|
|
only gpios. This driver configures a special memory address, which when
|
|
written to outputs 16 bit to the latches.
|
|
|
|
The node describing the memory mapped GPIOs needs to be a child of the node
|
|
describing the "lantiq,localbus".
|
|
|
|
Required properties:
|
|
- compatible : Should be "lantiq,gpio-mm-lantiq"
|
|
- reg : Address and length of the register set for the device
|
|
- #gpio-cells : Should be two. The first cell is the pin number and
|
|
the second cell is used to specify optional parameters (currently
|
|
unused).
|
|
- gpio-controller : Marks the device node as a gpio controller.
|
|
|
|
Optional properties:
|
|
- lantiq,shadow : The default value that we shall assume as already set on the
|
|
shift register cascade.
|
|
|
|
Example:
|
|
|
|
localbus@0 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
|
|
1 0 0x4000000 0x4000010>; /* addsel1 */
|
|
compatible = "lantiq,localbus", "simple-bus";
|
|
|
|
gpio_mm0: gpio@4000000 {
|
|
compatible = "lantiq,gpio-mm";
|
|
reg = <1 0x0 0x10>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
lantiq,shadow = <0x77f>
|
|
};
|
|
}
|