mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 02:23:16 +00:00
b6dfb2477f
All watchdog drivers implement the same set of ioctl commands, and fortunately all of them are compatible between 32-bit and 64-bit architectures. Modern drivers always go through drivers/watchdog/wdt.c as an abstraction layer, but older ones implement their own file_operations on a character device for this. Move the handling from fs/compat_ioctl.c into the individual drivers. Note that most of the legacy drivers will never be used on 64-bit hardware, because they are for an old 32-bit SoC implementation, but doing them all at once is safer than trying to guess which ones do or do not need the compat_ioctl handling. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1375 lines
39 KiB
C
1375 lines
39 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* fschmd.c
|
|
*
|
|
* Copyright (C) 2007 - 2009 Hans de Goede <hdegoede@redhat.com>
|
|
*/
|
|
|
|
/*
|
|
* Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes,
|
|
* Scylla, Heracles, Heimdall, Hades and Syleus chips
|
|
*
|
|
* Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6
|
|
* (candidate) fschmd drivers:
|
|
* Copyright (C) 2006 Thilo Cestonaro
|
|
* <thilo.cestonaro.external@fujitsu-siemens.com>
|
|
* Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
|
|
* Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
|
|
* Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
|
|
* Copyright (C) 2000 Hermann Jung <hej@odn.de>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/kref.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
|
|
|
|
/* Insmod parameters */
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
enum chips { fscpos, fscher, fscscy, fschrc, fschmd, fschds, fscsyl };
|
|
|
|
/*
|
|
* The FSCHMD registers and other defines
|
|
*/
|
|
|
|
/* chip identification */
|
|
#define FSCHMD_REG_IDENT_0 0x00
|
|
#define FSCHMD_REG_IDENT_1 0x01
|
|
#define FSCHMD_REG_IDENT_2 0x02
|
|
#define FSCHMD_REG_REVISION 0x03
|
|
|
|
/* global control and status */
|
|
#define FSCHMD_REG_EVENT_STATE 0x04
|
|
#define FSCHMD_REG_CONTROL 0x05
|
|
|
|
#define FSCHMD_CONTROL_ALERT_LED 0x01
|
|
|
|
/* watchdog */
|
|
static const u8 FSCHMD_REG_WDOG_CONTROL[7] = {
|
|
0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 };
|
|
static const u8 FSCHMD_REG_WDOG_STATE[7] = {
|
|
0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 };
|
|
static const u8 FSCHMD_REG_WDOG_PRESET[7] = {
|
|
0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a };
|
|
|
|
#define FSCHMD_WDOG_CONTROL_TRIGGER 0x10
|
|
#define FSCHMD_WDOG_CONTROL_STARTED 0x10 /* the same as trigger */
|
|
#define FSCHMD_WDOG_CONTROL_STOP 0x20
|
|
#define FSCHMD_WDOG_CONTROL_RESOLUTION 0x40
|
|
|
|
#define FSCHMD_WDOG_STATE_CARDRESET 0x02
|
|
|
|
/* voltages, weird order is to keep the same order as the old drivers */
|
|
static const u8 FSCHMD_REG_VOLT[7][6] = {
|
|
{ 0x45, 0x42, 0x48 }, /* pos */
|
|
{ 0x45, 0x42, 0x48 }, /* her */
|
|
{ 0x45, 0x42, 0x48 }, /* scy */
|
|
{ 0x45, 0x42, 0x48 }, /* hrc */
|
|
{ 0x45, 0x42, 0x48 }, /* hmd */
|
|
{ 0x21, 0x20, 0x22 }, /* hds */
|
|
{ 0x21, 0x20, 0x22, 0x23, 0x24, 0x25 }, /* syl */
|
|
};
|
|
|
|
static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 };
|
|
|
|
/*
|
|
* minimum pwm at which the fan is driven (pwm can be increased depending on
|
|
* the temp. Notice that for the scy some fans share there minimum speed.
|
|
* Also notice that with the scy the sensor order is different than with the
|
|
* other chips, this order was in the 2.4 driver and kept for consistency.
|
|
*/
|
|
static const u8 FSCHMD_REG_FAN_MIN[7][7] = {
|
|
{ 0x55, 0x65 }, /* pos */
|
|
{ 0x55, 0x65, 0xb5 }, /* her */
|
|
{ 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */
|
|
{ 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */
|
|
{ 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */
|
|
{ 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hds */
|
|
{ 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb4 }, /* syl */
|
|
};
|
|
|
|
/* actual fan speed */
|
|
static const u8 FSCHMD_REG_FAN_ACT[7][7] = {
|
|
{ 0x0e, 0x6b, 0xab }, /* pos */
|
|
{ 0x0e, 0x6b, 0xbb }, /* her */
|
|
{ 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */
|
|
{ 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */
|
|
{ 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */
|
|
{ 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hds */
|
|
{ 0x57, 0x67, 0x77, 0x87, 0x97, 0xa7, 0xb7 }, /* syl */
|
|
};
|
|
|
|
/* fan status registers */
|
|
static const u8 FSCHMD_REG_FAN_STATE[7][7] = {
|
|
{ 0x0d, 0x62, 0xa2 }, /* pos */
|
|
{ 0x0d, 0x62, 0xb2 }, /* her */
|
|
{ 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */
|
|
{ 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */
|
|
{ 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */
|
|
{ 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hds */
|
|
{ 0x50, 0x60, 0x70, 0x80, 0x90, 0xa0, 0xb0 }, /* syl */
|
|
};
|
|
|
|
/* fan ripple / divider registers */
|
|
static const u8 FSCHMD_REG_FAN_RIPPLE[7][7] = {
|
|
{ 0x0f, 0x6f, 0xaf }, /* pos */
|
|
{ 0x0f, 0x6f, 0xbf }, /* her */
|
|
{ 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */
|
|
{ 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */
|
|
{ 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */
|
|
{ 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hds */
|
|
{ 0x56, 0x66, 0x76, 0x86, 0x96, 0xa6, 0xb6 }, /* syl */
|
|
};
|
|
|
|
static const int FSCHMD_NO_FAN_SENSORS[7] = { 3, 3, 6, 4, 5, 5, 7 };
|
|
|
|
/* Fan status register bitmasks */
|
|
#define FSCHMD_FAN_ALARM 0x04 /* called fault by FSC! */
|
|
#define FSCHMD_FAN_NOT_PRESENT 0x08
|
|
#define FSCHMD_FAN_DISABLED 0x80
|
|
|
|
|
|
/* actual temperature registers */
|
|
static const u8 FSCHMD_REG_TEMP_ACT[7][11] = {
|
|
{ 0x64, 0x32, 0x35 }, /* pos */
|
|
{ 0x64, 0x32, 0x35 }, /* her */
|
|
{ 0x64, 0xD0, 0x32, 0x35 }, /* scy */
|
|
{ 0x64, 0x32, 0x35 }, /* hrc */
|
|
{ 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */
|
|
{ 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hds */
|
|
{ 0x58, 0x68, 0x78, 0x88, 0x98, 0xa8, /* syl */
|
|
0xb8, 0xc8, 0xd8, 0xe8, 0xf8 },
|
|
};
|
|
|
|
/* temperature state registers */
|
|
static const u8 FSCHMD_REG_TEMP_STATE[7][11] = {
|
|
{ 0x71, 0x81, 0x91 }, /* pos */
|
|
{ 0x71, 0x81, 0x91 }, /* her */
|
|
{ 0x71, 0xd1, 0x81, 0x91 }, /* scy */
|
|
{ 0x71, 0x81, 0x91 }, /* hrc */
|
|
{ 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hmd */
|
|
{ 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hds */
|
|
{ 0x59, 0x69, 0x79, 0x89, 0x99, 0xa9, /* syl */
|
|
0xb9, 0xc9, 0xd9, 0xe9, 0xf9 },
|
|
};
|
|
|
|
/*
|
|
* temperature high limit registers, FSC does not document these. Proven to be
|
|
* there with field testing on the fscher and fschrc, already supported / used
|
|
* in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers
|
|
* at these addresses, but doesn't want to confirm they are the same as with
|
|
* the fscher??
|
|
*/
|
|
static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = {
|
|
{ 0, 0, 0 }, /* pos */
|
|
{ 0x76, 0x86, 0x96 }, /* her */
|
|
{ 0x76, 0xd6, 0x86, 0x96 }, /* scy */
|
|
{ 0x76, 0x86, 0x96 }, /* hrc */
|
|
{ 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hmd */
|
|
{ 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hds */
|
|
{ 0x5a, 0x6a, 0x7a, 0x8a, 0x9a, 0xaa, /* syl */
|
|
0xba, 0xca, 0xda, 0xea, 0xfa },
|
|
};
|
|
|
|
/*
|
|
* These were found through experimenting with an fscher, currently they are
|
|
* not used, but we keep them around for future reference.
|
|
* On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc),
|
|
* AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence
|
|
* the fan speed.
|
|
* static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 };
|
|
* static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 };
|
|
*/
|
|
|
|
static const int FSCHMD_NO_TEMP_SENSORS[7] = { 3, 3, 4, 3, 5, 5, 11 };
|
|
|
|
/* temp status register bitmasks */
|
|
#define FSCHMD_TEMP_WORKING 0x01
|
|
#define FSCHMD_TEMP_ALERT 0x02
|
|
#define FSCHMD_TEMP_DISABLED 0x80
|
|
/* there only really is an alarm if the sensor is working and alert == 1 */
|
|
#define FSCHMD_TEMP_ALARM_MASK \
|
|
(FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT)
|
|
|
|
/*
|
|
* Functions declarations
|
|
*/
|
|
|
|
static int fschmd_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id);
|
|
static int fschmd_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info);
|
|
static int fschmd_remove(struct i2c_client *client);
|
|
static struct fschmd_data *fschmd_update_device(struct device *dev);
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
|
|
static const struct i2c_device_id fschmd_id[] = {
|
|
{ "fscpos", fscpos },
|
|
{ "fscher", fscher },
|
|
{ "fscscy", fscscy },
|
|
{ "fschrc", fschrc },
|
|
{ "fschmd", fschmd },
|
|
{ "fschds", fschds },
|
|
{ "fscsyl", fscsyl },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, fschmd_id);
|
|
|
|
static struct i2c_driver fschmd_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "fschmd",
|
|
},
|
|
.probe = fschmd_probe,
|
|
.remove = fschmd_remove,
|
|
.id_table = fschmd_id,
|
|
.detect = fschmd_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct fschmd_data {
|
|
struct i2c_client *client;
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock;
|
|
struct mutex watchdog_lock;
|
|
struct list_head list; /* member of the watchdog_data_list */
|
|
struct kref kref;
|
|
struct miscdevice watchdog_miscdev;
|
|
enum chips kind;
|
|
unsigned long watchdog_is_open;
|
|
char watchdog_expect_close;
|
|
char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
|
|
char valid; /* zero until following fields are valid */
|
|
unsigned long last_updated; /* in jiffies */
|
|
|
|
/* register values */
|
|
u8 revision; /* chip revision */
|
|
u8 global_control; /* global control register */
|
|
u8 watchdog_control; /* watchdog control register */
|
|
u8 watchdog_state; /* watchdog status register */
|
|
u8 watchdog_preset; /* watchdog counter preset on trigger val */
|
|
u8 volt[6]; /* voltage */
|
|
u8 temp_act[11]; /* temperature */
|
|
u8 temp_status[11]; /* status of sensor */
|
|
u8 temp_max[11]; /* high temp limit, notice: undocumented! */
|
|
u8 fan_act[7]; /* fans revolutions per second */
|
|
u8 fan_status[7]; /* fan status */
|
|
u8 fan_min[7]; /* fan min value for rps */
|
|
u8 fan_ripple[7]; /* divider for rps */
|
|
};
|
|
|
|
/*
|
|
* Global variables to hold information read from special DMI tables, which are
|
|
* available on FSC machines with an fscher or later chip. There is no need to
|
|
* protect these with a lock as they are only modified from our attach function
|
|
* which always gets called with the i2c-core lock held and never accessed
|
|
* before the attach function is done with them.
|
|
*/
|
|
static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 };
|
|
static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 };
|
|
static int dmi_vref = -1;
|
|
|
|
/*
|
|
* Somewhat ugly :( global data pointer list with all fschmd devices, so that
|
|
* we can find our device data as when using misc_register there is no other
|
|
* method to get to ones device data from the open fop.
|
|
*/
|
|
static LIST_HEAD(watchdog_data_list);
|
|
/* Note this lock not only protect list access, but also data.kref access */
|
|
static DEFINE_MUTEX(watchdog_data_mutex);
|
|
|
|
/*
|
|
* Release our data struct when we're detached from the i2c client *and* all
|
|
* references to our watchdog device are released
|
|
*/
|
|
static void fschmd_release_resources(struct kref *ref)
|
|
{
|
|
struct fschmd_data *data = container_of(ref, struct fschmd_data, kref);
|
|
kfree(data);
|
|
}
|
|
|
|
/*
|
|
* Sysfs attr show / store functions
|
|
*/
|
|
|
|
static ssize_t in_value_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
const int max_reading[3] = { 14200, 6600, 3300 };
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
if (data->kind == fscher || data->kind >= fschrc)
|
|
return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref *
|
|
dmi_mult[index]) / 255 + dmi_offset[index]);
|
|
else
|
|
return sprintf(buf, "%d\n", (data->volt[index] *
|
|
max_reading[index] + 128) / 255);
|
|
}
|
|
|
|
|
|
#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
|
|
|
|
static ssize_t temp_value_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index]));
|
|
}
|
|
|
|
static ssize_t temp_max_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
|
|
}
|
|
|
|
static ssize_t temp_max_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = dev_get_drvdata(dev);
|
|
long v;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
v = clamp_val(v / 1000, -128, 127) + 128;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
i2c_smbus_write_byte_data(to_i2c_client(dev),
|
|
FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
|
|
data->temp_max[index] = v;
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t temp_fault_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
/* bit 0 set means sensor working ok, so no fault! */
|
|
if (data->temp_status[index] & FSCHMD_TEMP_WORKING)
|
|
return sprintf(buf, "0\n");
|
|
else
|
|
return sprintf(buf, "1\n");
|
|
}
|
|
|
|
static ssize_t temp_alarm_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) ==
|
|
FSCHMD_TEMP_ALARM_MASK)
|
|
return sprintf(buf, "1\n");
|
|
else
|
|
return sprintf(buf, "0\n");
|
|
}
|
|
|
|
|
|
#define RPM_FROM_REG(val) ((val) * 60)
|
|
|
|
static ssize_t fan_value_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index]));
|
|
}
|
|
|
|
static ssize_t fan_div_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
/* bits 2..7 reserved => mask with 3 */
|
|
return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3));
|
|
}
|
|
|
|
static ssize_t fan_div_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
u8 reg;
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = dev_get_drvdata(dev);
|
|
/* supported values: 2, 4, 8 */
|
|
unsigned long v;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
switch (v) {
|
|
case 2:
|
|
v = 1;
|
|
break;
|
|
case 4:
|
|
v = 2;
|
|
break;
|
|
case 8:
|
|
v = 3;
|
|
break;
|
|
default:
|
|
dev_err(dev,
|
|
"fan_div value %lu not supported. Choose one of 2, 4 or 8!\n",
|
|
v);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
reg = i2c_smbus_read_byte_data(to_i2c_client(dev),
|
|
FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
|
|
|
|
/* bits 2..7 reserved => mask with 0x03 */
|
|
reg &= ~0x03;
|
|
reg |= v;
|
|
|
|
i2c_smbus_write_byte_data(to_i2c_client(dev),
|
|
FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
|
|
|
|
data->fan_ripple[index] = reg;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t fan_alarm_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
if (data->fan_status[index] & FSCHMD_FAN_ALARM)
|
|
return sprintf(buf, "1\n");
|
|
else
|
|
return sprintf(buf, "0\n");
|
|
}
|
|
|
|
static ssize_t fan_fault_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT)
|
|
return sprintf(buf, "1\n");
|
|
else
|
|
return sprintf(buf, "0\n");
|
|
}
|
|
|
|
|
|
static ssize_t pwm_auto_point1_pwm_show(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
int val = data->fan_min[index];
|
|
|
|
/* 0 = allow turning off (except on the syl), 1-255 = 50-100% */
|
|
if (val || data->kind == fscsyl)
|
|
val = val / 2 + 128;
|
|
|
|
return sprintf(buf, "%d\n", val);
|
|
}
|
|
|
|
static ssize_t pwm_auto_point1_pwm_store(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int index = to_sensor_dev_attr(devattr)->index;
|
|
struct fschmd_data *data = dev_get_drvdata(dev);
|
|
unsigned long v;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
/* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */
|
|
if (v || data->kind == fscsyl) {
|
|
v = clamp_val(v, 128, 255);
|
|
v = (v - 128) * 2 + 1;
|
|
}
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
i2c_smbus_write_byte_data(to_i2c_client(dev),
|
|
FSCHMD_REG_FAN_MIN[data->kind][index], v);
|
|
data->fan_min[index] = v;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
|
|
/*
|
|
* The FSC hwmon family has the ability to force an attached alert led to flash
|
|
* from software, we export this as an alert_led sysfs attr
|
|
*/
|
|
static ssize_t alert_led_show(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct fschmd_data *data = fschmd_update_device(dev);
|
|
|
|
if (data->global_control & FSCHMD_CONTROL_ALERT_LED)
|
|
return sprintf(buf, "1\n");
|
|
else
|
|
return sprintf(buf, "0\n");
|
|
}
|
|
|
|
static ssize_t alert_led_store(struct device *dev,
|
|
struct device_attribute *devattr, const char *buf, size_t count)
|
|
{
|
|
u8 reg;
|
|
struct fschmd_data *data = dev_get_drvdata(dev);
|
|
unsigned long v;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL);
|
|
|
|
if (v)
|
|
reg |= FSCHMD_CONTROL_ALERT_LED;
|
|
else
|
|
reg &= ~FSCHMD_CONTROL_ALERT_LED;
|
|
|
|
i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg);
|
|
|
|
data->global_control = reg;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR_RW(alert_led);
|
|
|
|
static struct sensor_device_attribute fschmd_attr[] = {
|
|
SENSOR_ATTR_RO(in0_input, in_value, 0),
|
|
SENSOR_ATTR_RO(in1_input, in_value, 1),
|
|
SENSOR_ATTR_RO(in2_input, in_value, 2),
|
|
SENSOR_ATTR_RO(in3_input, in_value, 3),
|
|
SENSOR_ATTR_RO(in4_input, in_value, 4),
|
|
SENSOR_ATTR_RO(in5_input, in_value, 5),
|
|
};
|
|
|
|
static struct sensor_device_attribute fschmd_temp_attr[] = {
|
|
SENSOR_ATTR_RO(temp1_input, temp_value, 0),
|
|
SENSOR_ATTR_RW(temp1_max, temp_max, 0),
|
|
SENSOR_ATTR_RO(temp1_fault, temp_fault, 0),
|
|
SENSOR_ATTR_RO(temp1_alarm, temp_alarm, 0),
|
|
SENSOR_ATTR_RO(temp2_input, temp_value, 1),
|
|
SENSOR_ATTR_RW(temp2_max, temp_max, 1),
|
|
SENSOR_ATTR_RO(temp2_fault, temp_fault, 1),
|
|
SENSOR_ATTR_RO(temp2_alarm, temp_alarm, 1),
|
|
SENSOR_ATTR_RO(temp3_input, temp_value, 2),
|
|
SENSOR_ATTR_RW(temp3_max, temp_max, 2),
|
|
SENSOR_ATTR_RO(temp3_fault, temp_fault, 2),
|
|
SENSOR_ATTR_RO(temp3_alarm, temp_alarm, 2),
|
|
SENSOR_ATTR_RO(temp4_input, temp_value, 3),
|
|
SENSOR_ATTR_RW(temp4_max, temp_max, 3),
|
|
SENSOR_ATTR_RO(temp4_fault, temp_fault, 3),
|
|
SENSOR_ATTR_RO(temp4_alarm, temp_alarm, 3),
|
|
SENSOR_ATTR_RO(temp5_input, temp_value, 4),
|
|
SENSOR_ATTR_RW(temp5_max, temp_max, 4),
|
|
SENSOR_ATTR_RO(temp5_fault, temp_fault, 4),
|
|
SENSOR_ATTR_RO(temp5_alarm, temp_alarm, 4),
|
|
SENSOR_ATTR_RO(temp6_input, temp_value, 5),
|
|
SENSOR_ATTR_RW(temp6_max, temp_max, 5),
|
|
SENSOR_ATTR_RO(temp6_fault, temp_fault, 5),
|
|
SENSOR_ATTR_RO(temp6_alarm, temp_alarm, 5),
|
|
SENSOR_ATTR_RO(temp7_input, temp_value, 6),
|
|
SENSOR_ATTR_RW(temp7_max, temp_max, 6),
|
|
SENSOR_ATTR_RO(temp7_fault, temp_fault, 6),
|
|
SENSOR_ATTR_RO(temp7_alarm, temp_alarm, 6),
|
|
SENSOR_ATTR_RO(temp8_input, temp_value, 7),
|
|
SENSOR_ATTR_RW(temp8_max, temp_max, 7),
|
|
SENSOR_ATTR_RO(temp8_fault, temp_fault, 7),
|
|
SENSOR_ATTR_RO(temp8_alarm, temp_alarm, 7),
|
|
SENSOR_ATTR_RO(temp9_input, temp_value, 8),
|
|
SENSOR_ATTR_RW(temp9_max, temp_max, 8),
|
|
SENSOR_ATTR_RO(temp9_fault, temp_fault, 8),
|
|
SENSOR_ATTR_RO(temp9_alarm, temp_alarm, 8),
|
|
SENSOR_ATTR_RO(temp10_input, temp_value, 9),
|
|
SENSOR_ATTR_RW(temp10_max, temp_max, 9),
|
|
SENSOR_ATTR_RO(temp10_fault, temp_fault, 9),
|
|
SENSOR_ATTR_RO(temp10_alarm, temp_alarm, 9),
|
|
SENSOR_ATTR_RO(temp11_input, temp_value, 10),
|
|
SENSOR_ATTR_RW(temp11_max, temp_max, 10),
|
|
SENSOR_ATTR_RO(temp11_fault, temp_fault, 10),
|
|
SENSOR_ATTR_RO(temp11_alarm, temp_alarm, 10),
|
|
};
|
|
|
|
static struct sensor_device_attribute fschmd_fan_attr[] = {
|
|
SENSOR_ATTR_RO(fan1_input, fan_value, 0),
|
|
SENSOR_ATTR_RW(fan1_div, fan_div, 0),
|
|
SENSOR_ATTR_RO(fan1_alarm, fan_alarm, 0),
|
|
SENSOR_ATTR_RO(fan1_fault, fan_fault, 0),
|
|
SENSOR_ATTR_RW(pwm1_auto_point1_pwm, pwm_auto_point1_pwm, 0),
|
|
SENSOR_ATTR_RO(fan2_input, fan_value, 1),
|
|
SENSOR_ATTR_RW(fan2_div, fan_div, 1),
|
|
SENSOR_ATTR_RO(fan2_alarm, fan_alarm, 1),
|
|
SENSOR_ATTR_RO(fan2_fault, fan_fault, 1),
|
|
SENSOR_ATTR_RW(pwm2_auto_point1_pwm, pwm_auto_point1_pwm, 1),
|
|
SENSOR_ATTR_RO(fan3_input, fan_value, 2),
|
|
SENSOR_ATTR_RW(fan3_div, fan_div, 2),
|
|
SENSOR_ATTR_RO(fan3_alarm, fan_alarm, 2),
|
|
SENSOR_ATTR_RO(fan3_fault, fan_fault, 2),
|
|
SENSOR_ATTR_RW(pwm3_auto_point1_pwm, pwm_auto_point1_pwm, 2),
|
|
SENSOR_ATTR_RO(fan4_input, fan_value, 3),
|
|
SENSOR_ATTR_RW(fan4_div, fan_div, 3),
|
|
SENSOR_ATTR_RO(fan4_alarm, fan_alarm, 3),
|
|
SENSOR_ATTR_RO(fan4_fault, fan_fault, 3),
|
|
SENSOR_ATTR_RW(pwm4_auto_point1_pwm, pwm_auto_point1_pwm, 3),
|
|
SENSOR_ATTR_RO(fan5_input, fan_value, 4),
|
|
SENSOR_ATTR_RW(fan5_div, fan_div, 4),
|
|
SENSOR_ATTR_RO(fan5_alarm, fan_alarm, 4),
|
|
SENSOR_ATTR_RO(fan5_fault, fan_fault, 4),
|
|
SENSOR_ATTR_RW(pwm5_auto_point1_pwm, pwm_auto_point1_pwm, 4),
|
|
SENSOR_ATTR_RO(fan6_input, fan_value, 5),
|
|
SENSOR_ATTR_RW(fan6_div, fan_div, 5),
|
|
SENSOR_ATTR_RO(fan6_alarm, fan_alarm, 5),
|
|
SENSOR_ATTR_RO(fan6_fault, fan_fault, 5),
|
|
SENSOR_ATTR_RW(pwm6_auto_point1_pwm, pwm_auto_point1_pwm, 5),
|
|
SENSOR_ATTR_RO(fan7_input, fan_value, 6),
|
|
SENSOR_ATTR_RW(fan7_div, fan_div, 6),
|
|
SENSOR_ATTR_RO(fan7_alarm, fan_alarm, 6),
|
|
SENSOR_ATTR_RO(fan7_fault, fan_fault, 6),
|
|
SENSOR_ATTR_RW(pwm7_auto_point1_pwm, pwm_auto_point1_pwm, 6),
|
|
};
|
|
|
|
|
|
/*
|
|
* Watchdog routines
|
|
*/
|
|
|
|
static int watchdog_set_timeout(struct fschmd_data *data, int timeout)
|
|
{
|
|
int ret, resolution;
|
|
int kind = data->kind + 1; /* 0-x array index -> 1-x module param */
|
|
|
|
/* 2 second or 60 second resolution? */
|
|
if (timeout <= 510 || kind == fscpos || kind == fscscy)
|
|
resolution = 2;
|
|
else
|
|
resolution = 60;
|
|
|
|
if (timeout < resolution || timeout > (resolution * 255))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->watchdog_lock);
|
|
if (!data->client) {
|
|
ret = -ENODEV;
|
|
goto leave;
|
|
}
|
|
|
|
if (resolution == 2)
|
|
data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION;
|
|
else
|
|
data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION;
|
|
|
|
data->watchdog_preset = DIV_ROUND_UP(timeout, resolution);
|
|
|
|
/* Write new timeout value */
|
|
i2c_smbus_write_byte_data(data->client,
|
|
FSCHMD_REG_WDOG_PRESET[data->kind], data->watchdog_preset);
|
|
/* Write new control register, do not trigger! */
|
|
i2c_smbus_write_byte_data(data->client,
|
|
FSCHMD_REG_WDOG_CONTROL[data->kind],
|
|
data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER);
|
|
|
|
ret = data->watchdog_preset * resolution;
|
|
|
|
leave:
|
|
mutex_unlock(&data->watchdog_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int watchdog_get_timeout(struct fschmd_data *data)
|
|
{
|
|
int timeout;
|
|
|
|
mutex_lock(&data->watchdog_lock);
|
|
if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION)
|
|
timeout = data->watchdog_preset * 60;
|
|
else
|
|
timeout = data->watchdog_preset * 2;
|
|
mutex_unlock(&data->watchdog_lock);
|
|
|
|
return timeout;
|
|
}
|
|
|
|
static int watchdog_trigger(struct fschmd_data *data)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&data->watchdog_lock);
|
|
if (!data->client) {
|
|
ret = -ENODEV;
|
|
goto leave;
|
|
}
|
|
|
|
data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER;
|
|
i2c_smbus_write_byte_data(data->client,
|
|
FSCHMD_REG_WDOG_CONTROL[data->kind],
|
|
data->watchdog_control);
|
|
leave:
|
|
mutex_unlock(&data->watchdog_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int watchdog_stop(struct fschmd_data *data)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&data->watchdog_lock);
|
|
if (!data->client) {
|
|
ret = -ENODEV;
|
|
goto leave;
|
|
}
|
|
|
|
data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED;
|
|
/*
|
|
* Don't store the stop flag in our watchdog control register copy, as
|
|
* its a write only bit (read always returns 0)
|
|
*/
|
|
i2c_smbus_write_byte_data(data->client,
|
|
FSCHMD_REG_WDOG_CONTROL[data->kind],
|
|
data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP);
|
|
leave:
|
|
mutex_unlock(&data->watchdog_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int watchdog_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct fschmd_data *pos, *data = NULL;
|
|
int watchdog_is_open;
|
|
|
|
/*
|
|
* We get called from drivers/char/misc.c with misc_mtx hold, and we
|
|
* call misc_register() from fschmd_probe() with watchdog_data_mutex
|
|
* hold, as misc_register() takes the misc_mtx lock, this is a possible
|
|
* deadlock, so we use mutex_trylock here.
|
|
*/
|
|
if (!mutex_trylock(&watchdog_data_mutex))
|
|
return -ERESTARTSYS;
|
|
list_for_each_entry(pos, &watchdog_data_list, list) {
|
|
if (pos->watchdog_miscdev.minor == iminor(inode)) {
|
|
data = pos;
|
|
break;
|
|
}
|
|
}
|
|
/* Note we can never not have found data, so we don't check for this */
|
|
watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
|
|
if (!watchdog_is_open)
|
|
kref_get(&data->kref);
|
|
mutex_unlock(&watchdog_data_mutex);
|
|
|
|
if (watchdog_is_open)
|
|
return -EBUSY;
|
|
|
|
/* Start the watchdog */
|
|
watchdog_trigger(data);
|
|
filp->private_data = data;
|
|
|
|
return stream_open(inode, filp);
|
|
}
|
|
|
|
static int watchdog_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct fschmd_data *data = filp->private_data;
|
|
|
|
if (data->watchdog_expect_close) {
|
|
watchdog_stop(data);
|
|
data->watchdog_expect_close = 0;
|
|
} else {
|
|
watchdog_trigger(data);
|
|
dev_crit(&data->client->dev,
|
|
"unexpected close, not stopping watchdog!\n");
|
|
}
|
|
|
|
clear_bit(0, &data->watchdog_is_open);
|
|
|
|
mutex_lock(&watchdog_data_mutex);
|
|
kref_put(&data->kref, fschmd_release_resources);
|
|
mutex_unlock(&watchdog_data_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t watchdog_write(struct file *filp, const char __user *buf,
|
|
size_t count, loff_t *offset)
|
|
{
|
|
int ret;
|
|
struct fschmd_data *data = filp->private_data;
|
|
|
|
if (count) {
|
|
if (!nowayout) {
|
|
size_t i;
|
|
|
|
/* Clear it in case it was set with a previous write */
|
|
data->watchdog_expect_close = 0;
|
|
|
|
for (i = 0; i != count; i++) {
|
|
char c;
|
|
if (get_user(c, buf + i))
|
|
return -EFAULT;
|
|
if (c == 'V')
|
|
data->watchdog_expect_close = 1;
|
|
}
|
|
}
|
|
ret = watchdog_trigger(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static long watchdog_ioctl(struct file *filp, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct watchdog_info ident = {
|
|
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
|
|
WDIOF_CARDRESET,
|
|
.identity = "FSC watchdog"
|
|
};
|
|
int i, ret = 0;
|
|
struct fschmd_data *data = filp->private_data;
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
ident.firmware_version = data->revision;
|
|
if (!nowayout)
|
|
ident.options |= WDIOF_MAGICCLOSE;
|
|
if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
|
|
ret = -EFAULT;
|
|
break;
|
|
|
|
case WDIOC_GETSTATUS:
|
|
ret = put_user(0, (int __user *)arg);
|
|
break;
|
|
|
|
case WDIOC_GETBOOTSTATUS:
|
|
if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET)
|
|
ret = put_user(WDIOF_CARDRESET, (int __user *)arg);
|
|
else
|
|
ret = put_user(0, (int __user *)arg);
|
|
break;
|
|
|
|
case WDIOC_KEEPALIVE:
|
|
ret = watchdog_trigger(data);
|
|
break;
|
|
|
|
case WDIOC_GETTIMEOUT:
|
|
i = watchdog_get_timeout(data);
|
|
ret = put_user(i, (int __user *)arg);
|
|
break;
|
|
|
|
case WDIOC_SETTIMEOUT:
|
|
if (get_user(i, (int __user *)arg)) {
|
|
ret = -EFAULT;
|
|
break;
|
|
}
|
|
ret = watchdog_set_timeout(data, i);
|
|
if (ret > 0)
|
|
ret = put_user(ret, (int __user *)arg);
|
|
break;
|
|
|
|
case WDIOC_SETOPTIONS:
|
|
if (get_user(i, (int __user *)arg)) {
|
|
ret = -EFAULT;
|
|
break;
|
|
}
|
|
|
|
if (i & WDIOS_DISABLECARD)
|
|
ret = watchdog_stop(data);
|
|
else if (i & WDIOS_ENABLECARD)
|
|
ret = watchdog_trigger(data);
|
|
else
|
|
ret = -EINVAL;
|
|
|
|
break;
|
|
default:
|
|
ret = -ENOTTY;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static const struct file_operations watchdog_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.open = watchdog_open,
|
|
.release = watchdog_release,
|
|
.write = watchdog_write,
|
|
.unlocked_ioctl = watchdog_ioctl,
|
|
.compat_ioctl = compat_ptr_ioctl,
|
|
};
|
|
|
|
|
|
/*
|
|
* Detect, register, unregister and update device functions
|
|
*/
|
|
|
|
/*
|
|
* DMI decode routine to read voltage scaling factors from special DMI tables,
|
|
* which are available on FSC machines with an fscher or later chip.
|
|
*/
|
|
static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
|
|
{
|
|
int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0;
|
|
|
|
/*
|
|
* dmi code ugliness, we get passed the address of the contents of
|
|
* a complete DMI record, but in the form of a dmi_header pointer, in
|
|
* reality this address holds header->length bytes of which the header
|
|
* are the first 4 bytes
|
|
*/
|
|
u8 *dmi_data = (u8 *)header;
|
|
|
|
/* We are looking for OEM-specific type 185 */
|
|
if (header->type != 185)
|
|
return;
|
|
|
|
/*
|
|
* we are looking for what Siemens calls "subtype" 19, the subtype
|
|
* is stored in byte 5 of the dmi block
|
|
*/
|
|
if (header->length < 5 || dmi_data[4] != 19)
|
|
return;
|
|
|
|
/*
|
|
* After the subtype comes 1 unknown byte and then blocks of 5 bytes,
|
|
* consisting of what Siemens calls an "Entity" number, followed by
|
|
* 2 16-bit words in LSB first order
|
|
*/
|
|
for (i = 6; (i + 4) < header->length; i += 5) {
|
|
/* entity 1 - 3: voltage multiplier and offset */
|
|
if (dmi_data[i] >= 1 && dmi_data[i] <= 3) {
|
|
/* Our in sensors order and the DMI order differ */
|
|
const int shuffle[3] = { 1, 0, 2 };
|
|
int in = shuffle[dmi_data[i] - 1];
|
|
|
|
/* Check for twice the same entity */
|
|
if (found & (1 << in))
|
|
return;
|
|
|
|
mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
|
|
offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8);
|
|
|
|
found |= 1 << in;
|
|
}
|
|
|
|
/* entity 7: reference voltage */
|
|
if (dmi_data[i] == 7) {
|
|
/* Check for twice the same entity */
|
|
if (found & 0x08)
|
|
return;
|
|
|
|
vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
|
|
|
|
found |= 0x08;
|
|
}
|
|
}
|
|
|
|
if (found == 0x0F) {
|
|
for (i = 0; i < 3; i++) {
|
|
dmi_mult[i] = mult[i] * 10;
|
|
dmi_offset[i] = offset[i] * 10;
|
|
}
|
|
/*
|
|
* According to the docs there should be separate dmi entries
|
|
* for the mult's and offsets of in3-5 of the syl, but on
|
|
* my test machine these are not present
|
|
*/
|
|
dmi_mult[3] = dmi_mult[2];
|
|
dmi_mult[4] = dmi_mult[1];
|
|
dmi_mult[5] = dmi_mult[2];
|
|
dmi_offset[3] = dmi_offset[2];
|
|
dmi_offset[4] = dmi_offset[1];
|
|
dmi_offset[5] = dmi_offset[2];
|
|
dmi_vref = vref;
|
|
}
|
|
}
|
|
|
|
static int fschmd_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
enum chips kind;
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
char id[4];
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
/* Detect & Identify the chip */
|
|
id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0);
|
|
id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1);
|
|
id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2);
|
|
id[3] = '\0';
|
|
|
|
if (!strcmp(id, "PEG"))
|
|
kind = fscpos;
|
|
else if (!strcmp(id, "HER"))
|
|
kind = fscher;
|
|
else if (!strcmp(id, "SCY"))
|
|
kind = fscscy;
|
|
else if (!strcmp(id, "HRC"))
|
|
kind = fschrc;
|
|
else if (!strcmp(id, "HMD"))
|
|
kind = fschmd;
|
|
else if (!strcmp(id, "HDS"))
|
|
kind = fschds;
|
|
else if (!strcmp(id, "SYL"))
|
|
kind = fscsyl;
|
|
else
|
|
return -ENODEV;
|
|
|
|
strlcpy(info->type, fschmd_id[kind].name, I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fschmd_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct fschmd_data *data;
|
|
const char * const names[7] = { "Poseidon", "Hermes", "Scylla",
|
|
"Heracles", "Heimdall", "Hades", "Syleus" };
|
|
const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 };
|
|
int i, err;
|
|
enum chips kind = id->driver_data;
|
|
|
|
data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
mutex_init(&data->watchdog_lock);
|
|
INIT_LIST_HEAD(&data->list);
|
|
kref_init(&data->kref);
|
|
/*
|
|
* Store client pointer in our data struct for watchdog usage
|
|
* (where the client is found through a data ptr instead of the
|
|
* otherway around)
|
|
*/
|
|
data->client = client;
|
|
data->kind = kind;
|
|
|
|
if (kind == fscpos) {
|
|
/*
|
|
* The Poseidon has hardwired temp limits, fill these
|
|
* in for the alarm resetting code
|
|
*/
|
|
data->temp_max[0] = 70 + 128;
|
|
data->temp_max[1] = 50 + 128;
|
|
data->temp_max[2] = 50 + 128;
|
|
}
|
|
|
|
/* Read the special DMI table for fscher and newer chips */
|
|
if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) {
|
|
dmi_walk(fschmd_dmi_decode, NULL);
|
|
if (dmi_vref == -1) {
|
|
dev_warn(&client->dev,
|
|
"Couldn't get voltage scaling factors from "
|
|
"BIOS DMI table, using builtin defaults\n");
|
|
dmi_vref = 33;
|
|
}
|
|
}
|
|
|
|
/* Read in some never changing registers */
|
|
data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
|
|
data->global_control = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_CONTROL);
|
|
data->watchdog_control = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_WDOG_CONTROL[data->kind]);
|
|
data->watchdog_state = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_WDOG_STATE[data->kind]);
|
|
data->watchdog_preset = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_WDOG_PRESET[data->kind]);
|
|
|
|
err = device_create_file(&client->dev, &dev_attr_alert_led);
|
|
if (err)
|
|
goto exit_detach;
|
|
|
|
for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) {
|
|
err = device_create_file(&client->dev,
|
|
&fschmd_attr[i].dev_attr);
|
|
if (err)
|
|
goto exit_detach;
|
|
}
|
|
|
|
for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) {
|
|
/* Poseidon doesn't have TEMP_LIMIT registers */
|
|
if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show ==
|
|
temp_max_show)
|
|
continue;
|
|
|
|
if (kind == fscsyl) {
|
|
if (i % 4 == 0)
|
|
data->temp_status[i / 4] =
|
|
i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_TEMP_STATE
|
|
[data->kind][i / 4]);
|
|
if (data->temp_status[i / 4] & FSCHMD_TEMP_DISABLED)
|
|
continue;
|
|
}
|
|
|
|
err = device_create_file(&client->dev,
|
|
&fschmd_temp_attr[i].dev_attr);
|
|
if (err)
|
|
goto exit_detach;
|
|
}
|
|
|
|
for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) {
|
|
/* Poseidon doesn't have a FAN_MIN register for its 3rd fan */
|
|
if (kind == fscpos &&
|
|
!strcmp(fschmd_fan_attr[i].dev_attr.attr.name,
|
|
"pwm3_auto_point1_pwm"))
|
|
continue;
|
|
|
|
if (kind == fscsyl) {
|
|
if (i % 5 == 0)
|
|
data->fan_status[i / 5] =
|
|
i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_FAN_STATE
|
|
[data->kind][i / 5]);
|
|
if (data->fan_status[i / 5] & FSCHMD_FAN_DISABLED)
|
|
continue;
|
|
}
|
|
|
|
err = device_create_file(&client->dev,
|
|
&fschmd_fan_attr[i].dev_attr);
|
|
if (err)
|
|
goto exit_detach;
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
data->hwmon_dev = NULL;
|
|
goto exit_detach;
|
|
}
|
|
|
|
/*
|
|
* We take the data_mutex lock early so that watchdog_open() cannot
|
|
* run when misc_register() has completed, but we've not yet added
|
|
* our data to the watchdog_data_list (and set the default timeout)
|
|
*/
|
|
mutex_lock(&watchdog_data_mutex);
|
|
for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) {
|
|
/* Register our watchdog part */
|
|
snprintf(data->watchdog_name, sizeof(data->watchdog_name),
|
|
"watchdog%c", (i == 0) ? '\0' : ('0' + i));
|
|
data->watchdog_miscdev.name = data->watchdog_name;
|
|
data->watchdog_miscdev.fops = &watchdog_fops;
|
|
data->watchdog_miscdev.minor = watchdog_minors[i];
|
|
err = misc_register(&data->watchdog_miscdev);
|
|
if (err == -EBUSY)
|
|
continue;
|
|
if (err) {
|
|
data->watchdog_miscdev.minor = 0;
|
|
dev_err(&client->dev,
|
|
"Registering watchdog chardev: %d\n", err);
|
|
break;
|
|
}
|
|
|
|
list_add(&data->list, &watchdog_data_list);
|
|
watchdog_set_timeout(data, 60);
|
|
dev_info(&client->dev,
|
|
"Registered watchdog chardev major 10, minor: %d\n",
|
|
watchdog_minors[i]);
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(watchdog_minors)) {
|
|
data->watchdog_miscdev.minor = 0;
|
|
dev_warn(&client->dev,
|
|
"Couldn't register watchdog chardev (due to no free minor)\n");
|
|
}
|
|
mutex_unlock(&watchdog_data_mutex);
|
|
|
|
dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n",
|
|
names[data->kind], (int) data->revision);
|
|
|
|
return 0;
|
|
|
|
exit_detach:
|
|
fschmd_remove(client); /* will also free data for us */
|
|
return err;
|
|
}
|
|
|
|
static int fschmd_remove(struct i2c_client *client)
|
|
{
|
|
struct fschmd_data *data = i2c_get_clientdata(client);
|
|
int i;
|
|
|
|
/* Unregister the watchdog (if registered) */
|
|
if (data->watchdog_miscdev.minor) {
|
|
misc_deregister(&data->watchdog_miscdev);
|
|
if (data->watchdog_is_open) {
|
|
dev_warn(&client->dev,
|
|
"i2c client detached with watchdog open! "
|
|
"Stopping watchdog.\n");
|
|
watchdog_stop(data);
|
|
}
|
|
mutex_lock(&watchdog_data_mutex);
|
|
list_del(&data->list);
|
|
mutex_unlock(&watchdog_data_mutex);
|
|
/* Tell the watchdog code the client is gone */
|
|
mutex_lock(&data->watchdog_lock);
|
|
data->client = NULL;
|
|
mutex_unlock(&data->watchdog_lock);
|
|
}
|
|
|
|
/*
|
|
* Check if registered in case we're called from fschmd_detect
|
|
* to cleanup after an error
|
|
*/
|
|
if (data->hwmon_dev)
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
|
|
device_remove_file(&client->dev, &dev_attr_alert_led);
|
|
for (i = 0; i < (FSCHMD_NO_VOLT_SENSORS[data->kind]); i++)
|
|
device_remove_file(&client->dev, &fschmd_attr[i].dev_attr);
|
|
for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++)
|
|
device_remove_file(&client->dev,
|
|
&fschmd_temp_attr[i].dev_attr);
|
|
for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++)
|
|
device_remove_file(&client->dev,
|
|
&fschmd_fan_attr[i].dev_attr);
|
|
|
|
mutex_lock(&watchdog_data_mutex);
|
|
kref_put(&data->kref, fschmd_release_resources);
|
|
mutex_unlock(&watchdog_data_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct fschmd_data *fschmd_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct fschmd_data *data = i2c_get_clientdata(client);
|
|
int i;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
|
|
|
|
for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) {
|
|
data->temp_act[i] = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_TEMP_ACT[data->kind][i]);
|
|
data->temp_status[i] = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_TEMP_STATE[data->kind][i]);
|
|
|
|
/* The fscpos doesn't have TEMP_LIMIT registers */
|
|
if (FSCHMD_REG_TEMP_LIMIT[data->kind][i])
|
|
data->temp_max[i] = i2c_smbus_read_byte_data(
|
|
client,
|
|
FSCHMD_REG_TEMP_LIMIT[data->kind][i]);
|
|
|
|
/*
|
|
* reset alarm if the alarm condition is gone,
|
|
* the chip doesn't do this itself
|
|
*/
|
|
if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) ==
|
|
FSCHMD_TEMP_ALARM_MASK &&
|
|
data->temp_act[i] < data->temp_max[i])
|
|
i2c_smbus_write_byte_data(client,
|
|
FSCHMD_REG_TEMP_STATE[data->kind][i],
|
|
data->temp_status[i]);
|
|
}
|
|
|
|
for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) {
|
|
data->fan_act[i] = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_FAN_ACT[data->kind][i]);
|
|
data->fan_status[i] = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_FAN_STATE[data->kind][i]);
|
|
data->fan_ripple[i] = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_FAN_RIPPLE[data->kind][i]);
|
|
|
|
/* The fscpos third fan doesn't have a fan_min */
|
|
if (FSCHMD_REG_FAN_MIN[data->kind][i])
|
|
data->fan_min[i] = i2c_smbus_read_byte_data(
|
|
client,
|
|
FSCHMD_REG_FAN_MIN[data->kind][i]);
|
|
|
|
/* reset fan status if speed is back to > 0 */
|
|
if ((data->fan_status[i] & FSCHMD_FAN_ALARM) &&
|
|
data->fan_act[i])
|
|
i2c_smbus_write_byte_data(client,
|
|
FSCHMD_REG_FAN_STATE[data->kind][i],
|
|
data->fan_status[i]);
|
|
}
|
|
|
|
for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++)
|
|
data->volt[i] = i2c_smbus_read_byte_data(client,
|
|
FSCHMD_REG_VOLT[data->kind][i]);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
module_i2c_driver(fschmd_driver);
|
|
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles, Heimdall, Hades "
|
|
"and Syleus driver");
|
|
MODULE_LICENSE("GPL");
|