mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 18:41:23 +00:00
e42615ec23
It's hard for occasional GPIO code reader/writer to know if values 0/1 equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT to help them out. NOTE - for gpio-amd-fch and gpio-bd9571mwv: This commit also changes the return value for direction get to equal 1 for direction INPUT. Prior this commit these drivers might have returned some other positive value but 1 for INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
495 lines
12 KiB
C
495 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver
|
|
*
|
|
* Copyright (C) 2010 Extreme Engineering Solutions.
|
|
*/
|
|
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mfd/lpc_ich.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define DRV_NAME "gpio_ich"
|
|
|
|
/*
|
|
* GPIO register offsets in GPIO I/O space.
|
|
* Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and
|
|
* LVLx registers. Logic in the read/write functions takes a register and
|
|
* an absolute bit number and determines the proper register offset and bit
|
|
* number in that register. For example, to read the value of GPIO bit 50
|
|
* the code would access offset ichx_regs[2(=GPIO_LVL)][1(=50/32)],
|
|
* bit 18 (50%32).
|
|
*/
|
|
enum GPIO_REG {
|
|
GPIO_USE_SEL = 0,
|
|
GPIO_IO_SEL,
|
|
GPIO_LVL,
|
|
GPO_BLINK
|
|
};
|
|
|
|
static const u8 ichx_regs[4][3] = {
|
|
{0x00, 0x30, 0x40}, /* USE_SEL[1-3] offsets */
|
|
{0x04, 0x34, 0x44}, /* IO_SEL[1-3] offsets */
|
|
{0x0c, 0x38, 0x48}, /* LVL[1-3] offsets */
|
|
{0x18, 0x18, 0x18}, /* BLINK offset */
|
|
};
|
|
|
|
static const u8 ichx_reglen[3] = {
|
|
0x30, 0x10, 0x10,
|
|
};
|
|
|
|
static const u8 avoton_regs[4][3] = {
|
|
{0x00, 0x80, 0x00},
|
|
{0x04, 0x84, 0x00},
|
|
{0x08, 0x88, 0x00},
|
|
};
|
|
|
|
static const u8 avoton_reglen[3] = {
|
|
0x10, 0x10, 0x00,
|
|
};
|
|
|
|
#define ICHX_WRITE(val, reg, base_res) outl(val, (reg) + (base_res)->start)
|
|
#define ICHX_READ(reg, base_res) inl((reg) + (base_res)->start)
|
|
|
|
struct ichx_desc {
|
|
/* Max GPIO pins the chipset can have */
|
|
uint ngpio;
|
|
|
|
/* chipset registers */
|
|
const u8 (*regs)[3];
|
|
const u8 *reglen;
|
|
|
|
/* GPO_BLINK is available on this chipset */
|
|
bool have_blink;
|
|
|
|
/* Whether the chipset has GPIO in GPE0_STS in the PM IO region */
|
|
bool uses_gpe0;
|
|
|
|
/* USE_SEL is bogus on some chipsets, eg 3100 */
|
|
u32 use_sel_ignore[3];
|
|
|
|
/* Some chipsets have quirks, let these use their own request/get */
|
|
int (*request)(struct gpio_chip *chip, unsigned offset);
|
|
int (*get)(struct gpio_chip *chip, unsigned offset);
|
|
|
|
/*
|
|
* Some chipsets don't let reading output values on GPIO_LVL register
|
|
* this option allows driver caching written output values
|
|
*/
|
|
bool use_outlvl_cache;
|
|
};
|
|
|
|
static struct {
|
|
spinlock_t lock;
|
|
struct device *dev;
|
|
struct gpio_chip chip;
|
|
struct resource *gpio_base; /* GPIO IO base */
|
|
struct resource *pm_base; /* Power Mangagment IO base */
|
|
struct ichx_desc *desc; /* Pointer to chipset-specific description */
|
|
u32 orig_gpio_ctrl; /* Orig CTRL value, used to restore on exit */
|
|
u8 use_gpio; /* Which GPIO groups are usable */
|
|
int outlvl_cache[3]; /* cached output values */
|
|
} ichx_priv;
|
|
|
|
static int modparam_gpiobase = -1; /* dynamic */
|
|
module_param_named(gpiobase, modparam_gpiobase, int, 0444);
|
|
MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
|
|
|
|
static int ichx_write_bit(int reg, unsigned nr, int val, int verify)
|
|
{
|
|
unsigned long flags;
|
|
u32 data, tmp;
|
|
int reg_nr = nr / 32;
|
|
int bit = nr & 0x1f;
|
|
|
|
spin_lock_irqsave(&ichx_priv.lock, flags);
|
|
|
|
if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
|
|
data = ichx_priv.outlvl_cache[reg_nr];
|
|
else
|
|
data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
|
|
ichx_priv.gpio_base);
|
|
|
|
if (val)
|
|
data |= BIT(bit);
|
|
else
|
|
data &= ~BIT(bit);
|
|
ICHX_WRITE(data, ichx_priv.desc->regs[reg][reg_nr],
|
|
ichx_priv.gpio_base);
|
|
if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
|
|
ichx_priv.outlvl_cache[reg_nr] = data;
|
|
|
|
tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
|
|
ichx_priv.gpio_base);
|
|
|
|
spin_unlock_irqrestore(&ichx_priv.lock, flags);
|
|
|
|
return (verify && data != tmp) ? -EPERM : 0;
|
|
}
|
|
|
|
static int ichx_read_bit(int reg, unsigned nr)
|
|
{
|
|
unsigned long flags;
|
|
u32 data;
|
|
int reg_nr = nr / 32;
|
|
int bit = nr & 0x1f;
|
|
|
|
spin_lock_irqsave(&ichx_priv.lock, flags);
|
|
|
|
data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
|
|
ichx_priv.gpio_base);
|
|
|
|
if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
|
|
data = ichx_priv.outlvl_cache[reg_nr] | data;
|
|
|
|
spin_unlock_irqrestore(&ichx_priv.lock, flags);
|
|
|
|
return !!(data & BIT(bit));
|
|
}
|
|
|
|
static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
|
|
{
|
|
return !!(ichx_priv.use_gpio & BIT(nr / 32));
|
|
}
|
|
|
|
static int ichx_gpio_get_direction(struct gpio_chip *gpio, unsigned nr)
|
|
{
|
|
if (ichx_read_bit(GPIO_IO_SEL, nr))
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
}
|
|
|
|
static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
|
|
{
|
|
/*
|
|
* Try setting pin as an input and verify it worked since many pins
|
|
* are output-only.
|
|
*/
|
|
return ichx_write_bit(GPIO_IO_SEL, nr, 1, 1);
|
|
}
|
|
|
|
static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
|
|
int val)
|
|
{
|
|
/* Disable blink hardware which is available for GPIOs from 0 to 31. */
|
|
if (nr < 32 && ichx_priv.desc->have_blink)
|
|
ichx_write_bit(GPO_BLINK, nr, 0, 0);
|
|
|
|
/* Set GPIO output value. */
|
|
ichx_write_bit(GPIO_LVL, nr, val, 0);
|
|
|
|
/*
|
|
* Try setting pin as an output and verify it worked since many pins
|
|
* are input-only.
|
|
*/
|
|
return ichx_write_bit(GPIO_IO_SEL, nr, 0, 1);
|
|
}
|
|
|
|
static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr)
|
|
{
|
|
return ichx_read_bit(GPIO_LVL, nr);
|
|
}
|
|
|
|
static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr)
|
|
{
|
|
unsigned long flags;
|
|
u32 data;
|
|
|
|
/*
|
|
* GPI 0 - 15 need to be read from the power management registers on
|
|
* a ICH6/3100 bridge.
|
|
*/
|
|
if (nr < 16) {
|
|
if (!ichx_priv.pm_base)
|
|
return -ENXIO;
|
|
|
|
spin_lock_irqsave(&ichx_priv.lock, flags);
|
|
|
|
/* GPI 0 - 15 are latched, write 1 to clear*/
|
|
ICHX_WRITE(BIT(16 + nr), 0, ichx_priv.pm_base);
|
|
data = ICHX_READ(0, ichx_priv.pm_base);
|
|
|
|
spin_unlock_irqrestore(&ichx_priv.lock, flags);
|
|
|
|
return !!((data >> 16) & BIT(nr));
|
|
} else {
|
|
return ichx_gpio_get(chip, nr);
|
|
}
|
|
}
|
|
|
|
static int ichx_gpio_request(struct gpio_chip *chip, unsigned nr)
|
|
{
|
|
if (!ichx_gpio_check_available(chip, nr))
|
|
return -ENXIO;
|
|
|
|
/*
|
|
* Note we assume the BIOS properly set a bridge's USE value. Some
|
|
* chips (eg Intel 3100) have bogus USE values though, so first see if
|
|
* the chipset's USE value can be trusted for this specific bit.
|
|
* If it can't be trusted, assume that the pin can be used as a GPIO.
|
|
*/
|
|
if (ichx_priv.desc->use_sel_ignore[nr / 32] & BIT(nr & 0x1f))
|
|
return 0;
|
|
|
|
return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
|
|
}
|
|
|
|
static int ich6_gpio_request(struct gpio_chip *chip, unsigned nr)
|
|
{
|
|
/*
|
|
* Fixups for bits 16 and 17 are necessary on the Intel ICH6/3100
|
|
* bridge as they are controlled by USE register bits 0 and 1. See
|
|
* "Table 704 GPIO_USE_SEL1 register" in the i3100 datasheet for
|
|
* additional info.
|
|
*/
|
|
if (nr == 16 || nr == 17)
|
|
nr -= 16;
|
|
|
|
return ichx_gpio_request(chip, nr);
|
|
}
|
|
|
|
static void ichx_gpio_set(struct gpio_chip *chip, unsigned nr, int val)
|
|
{
|
|
ichx_write_bit(GPIO_LVL, nr, val, 0);
|
|
}
|
|
|
|
static void ichx_gpiolib_setup(struct gpio_chip *chip)
|
|
{
|
|
chip->owner = THIS_MODULE;
|
|
chip->label = DRV_NAME;
|
|
chip->parent = ichx_priv.dev;
|
|
|
|
/* Allow chip-specific overrides of request()/get() */
|
|
chip->request = ichx_priv.desc->request ?
|
|
ichx_priv.desc->request : ichx_gpio_request;
|
|
chip->get = ichx_priv.desc->get ?
|
|
ichx_priv.desc->get : ichx_gpio_get;
|
|
|
|
chip->set = ichx_gpio_set;
|
|
chip->get_direction = ichx_gpio_get_direction;
|
|
chip->direction_input = ichx_gpio_direction_input;
|
|
chip->direction_output = ichx_gpio_direction_output;
|
|
chip->base = modparam_gpiobase;
|
|
chip->ngpio = ichx_priv.desc->ngpio;
|
|
chip->can_sleep = false;
|
|
chip->dbg_show = NULL;
|
|
}
|
|
|
|
/* ICH6-based, 631xesb-based */
|
|
static struct ichx_desc ich6_desc = {
|
|
/* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */
|
|
.request = ich6_gpio_request,
|
|
.get = ich6_gpio_get,
|
|
|
|
/* GPIO 0-15 are read in the GPE0_STS PM register */
|
|
.uses_gpe0 = true,
|
|
|
|
.ngpio = 50,
|
|
.have_blink = true,
|
|
.regs = ichx_regs,
|
|
.reglen = ichx_reglen,
|
|
};
|
|
|
|
/* Intel 3100 */
|
|
static struct ichx_desc i3100_desc = {
|
|
/*
|
|
* Bits 16,17, 20 of USE_SEL and bit 16 of USE_SEL2 always read 0 on
|
|
* the Intel 3100. See "Table 712. GPIO Summary Table" of 3100
|
|
* Datasheet for more info.
|
|
*/
|
|
.use_sel_ignore = {0x00130000, 0x00010000, 0x0},
|
|
|
|
/* The 3100 needs fixups for GPIO 0 - 17 */
|
|
.request = ich6_gpio_request,
|
|
.get = ich6_gpio_get,
|
|
|
|
/* GPIO 0-15 are read in the GPE0_STS PM register */
|
|
.uses_gpe0 = true,
|
|
|
|
.ngpio = 50,
|
|
.regs = ichx_regs,
|
|
.reglen = ichx_reglen,
|
|
};
|
|
|
|
/* ICH7 and ICH8-based */
|
|
static struct ichx_desc ich7_desc = {
|
|
.ngpio = 50,
|
|
.have_blink = true,
|
|
.regs = ichx_regs,
|
|
.reglen = ichx_reglen,
|
|
};
|
|
|
|
/* ICH9-based */
|
|
static struct ichx_desc ich9_desc = {
|
|
.ngpio = 61,
|
|
.have_blink = true,
|
|
.regs = ichx_regs,
|
|
.reglen = ichx_reglen,
|
|
};
|
|
|
|
/* ICH10-based - Consumer/corporate versions have different amount of GPIO */
|
|
static struct ichx_desc ich10_cons_desc = {
|
|
.ngpio = 61,
|
|
.have_blink = true,
|
|
.regs = ichx_regs,
|
|
.reglen = ichx_reglen,
|
|
};
|
|
static struct ichx_desc ich10_corp_desc = {
|
|
.ngpio = 72,
|
|
.have_blink = true,
|
|
.regs = ichx_regs,
|
|
.reglen = ichx_reglen,
|
|
};
|
|
|
|
/* Intel 5 series, 6 series, 3400 series, and C200 series */
|
|
static struct ichx_desc intel5_desc = {
|
|
.ngpio = 76,
|
|
.regs = ichx_regs,
|
|
.reglen = ichx_reglen,
|
|
};
|
|
|
|
/* Avoton */
|
|
static struct ichx_desc avoton_desc = {
|
|
/* Avoton has only 59 GPIOs, but we assume the first set of register
|
|
* (Core) has 32 instead of 31 to keep gpio-ich compliance
|
|
*/
|
|
.ngpio = 60,
|
|
.regs = avoton_regs,
|
|
.reglen = avoton_reglen,
|
|
.use_outlvl_cache = true,
|
|
};
|
|
|
|
static int ichx_gpio_request_regions(struct device *dev,
|
|
struct resource *res_base, const char *name, u8 use_gpio)
|
|
{
|
|
int i;
|
|
|
|
if (!res_base || !res_base->start || !res_base->end)
|
|
return -ENODEV;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) {
|
|
if (!(use_gpio & BIT(i)))
|
|
continue;
|
|
if (!devm_request_region(dev,
|
|
res_base->start + ichx_priv.desc->regs[0][i],
|
|
ichx_priv.desc->reglen[i], name))
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ichx_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct lpc_ich_info *ich_info = dev_get_platdata(dev);
|
|
struct resource *res_base, *res_pm;
|
|
int err;
|
|
|
|
if (!ich_info)
|
|
return -ENODEV;
|
|
|
|
switch (ich_info->gpio_version) {
|
|
case ICH_I3100_GPIO:
|
|
ichx_priv.desc = &i3100_desc;
|
|
break;
|
|
case ICH_V5_GPIO:
|
|
ichx_priv.desc = &intel5_desc;
|
|
break;
|
|
case ICH_V6_GPIO:
|
|
ichx_priv.desc = &ich6_desc;
|
|
break;
|
|
case ICH_V7_GPIO:
|
|
ichx_priv.desc = &ich7_desc;
|
|
break;
|
|
case ICH_V9_GPIO:
|
|
ichx_priv.desc = &ich9_desc;
|
|
break;
|
|
case ICH_V10CORP_GPIO:
|
|
ichx_priv.desc = &ich10_corp_desc;
|
|
break;
|
|
case ICH_V10CONS_GPIO:
|
|
ichx_priv.desc = &ich10_cons_desc;
|
|
break;
|
|
case AVOTON_GPIO:
|
|
ichx_priv.desc = &avoton_desc;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
ichx_priv.dev = dev;
|
|
spin_lock_init(&ichx_priv.lock);
|
|
|
|
res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO);
|
|
err = ichx_gpio_request_regions(dev, res_base, pdev->name,
|
|
ich_info->use_gpio);
|
|
if (err)
|
|
return err;
|
|
|
|
ichx_priv.gpio_base = res_base;
|
|
ichx_priv.use_gpio = ich_info->use_gpio;
|
|
|
|
/*
|
|
* If necessary, determine the I/O address of ACPI/power management
|
|
* registers which are needed to read the GPE0 register for GPI pins
|
|
* 0 - 15 on some chipsets.
|
|
*/
|
|
if (!ichx_priv.desc->uses_gpe0)
|
|
goto init;
|
|
|
|
res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0);
|
|
if (!res_pm) {
|
|
dev_warn(dev, "ACPI BAR is unavailable, GPI 0 - 15 unavailable\n");
|
|
goto init;
|
|
}
|
|
|
|
if (!devm_request_region(dev, res_pm->start, resource_size(res_pm),
|
|
pdev->name)) {
|
|
dev_warn(dev, "ACPI BAR is busy, GPI 0 - 15 unavailable\n");
|
|
goto init;
|
|
}
|
|
|
|
ichx_priv.pm_base = res_pm;
|
|
|
|
init:
|
|
ichx_gpiolib_setup(&ichx_priv.chip);
|
|
err = gpiochip_add_data(&ichx_priv.chip, NULL);
|
|
if (err) {
|
|
dev_err(dev, "Failed to register GPIOs\n");
|
|
return err;
|
|
}
|
|
|
|
dev_info(dev, "GPIO from %d to %d\n", ichx_priv.chip.base,
|
|
ichx_priv.chip.base + ichx_priv.chip.ngpio - 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ichx_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
gpiochip_remove(&ichx_priv.chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ichx_gpio_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
},
|
|
.probe = ichx_gpio_probe,
|
|
.remove = ichx_gpio_remove,
|
|
};
|
|
|
|
module_platform_driver(ichx_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Peter Tyser <ptyser@xes-inc.com>");
|
|
MODULE_DESCRIPTION("GPIO interface for Intel ICH series");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:"DRV_NAME);
|