Feng Kan 4ef76ad046 PCI: Add ACS quirk for Ampere root ports ... The Ampere Computing PCIe root port does not support ACS at this point. However, the hardware provides isolation and source validation through the SMMU. The stream ID generated by the PCIe ports contain both the bus/device/function number as well as the port ID in its 3 most significant bits. Turn on ACS but disable all the peer-to-peer features. APM is being rebranded to Ampere. The Vendor and Device IDs change, but the functionality stays the same. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>		2018-02-22 17:47:31 -06:00
..
cadence	PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller	2018-01-31 11:13:27 +00:00
dwc	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
endpoint	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
host	pci-v4.16-changes	2018-02-06 09:59:40 -08:00
hotplug	More ACPI updates for v4.16-rc1	2018-02-09 09:44:25 -08:00
pcie	pci-v4.16-changes	2018-02-06 09:59:40 -08:00
switch	vfs: do bulk POLL* -> EPOLL* replacement	2018-02-11 14:34:03 -08:00
access.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
ats.c	PCI: Add SPDX GPL-2.0 when no license was specified	2018-01-26 11:45:16 -06:00
bus.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
ecam.c	PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate	2018-01-28 15:48:29 -06:00
host-bridge.c	PCI: Add SPDX GPL-2.0 when no license was specified	2018-01-26 11:45:16 -06:00
iov.c	pci-v4.16-changes	2018-02-06 09:59:40 -08:00
irq.c	PCI: Add wrappers for dev_printk()	2018-01-18 12:55:24 -06:00
Kconfig	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
Makefile	PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller	2018-01-31 11:13:27 +00:00
mmap.c	PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate	2018-01-28 15:48:29 -06:00
msi.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
of.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
pci-acpi.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
pci-driver.c	pci-v4.16-changes	2018-02-06 09:59:40 -08:00
pci-label.c	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
pci-mid.c	PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate	2018-01-28 15:48:29 -06:00
pci-stub.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
pci-sysfs.c	PCI: Probe for device reset support during enumeration	2018-02-16 10:55:38 -06:00
pci.c	PCI: Remove redundant probes for device reset support	2018-02-21 17:24:04 -06:00
pci.h	Merge branch 'pci/trivial' into next	2018-01-31 10:13:07 -06:00
probe.c	PCI: Probe for device reset support during enumeration	2018-02-16 10:55:38 -06:00
proc.c	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
quirks.c	PCI: Add ACS quirk for Ampere root ports	2018-02-22 17:47:31 -06:00
remove.c	PCI: Add SPDX GPL-2.0 when no license was specified	2018-01-26 11:45:16 -06:00
rom.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
search.c	PCI: Add SPDX GPL-2.0 when no license was specified	2018-01-26 11:45:16 -06:00
setup-bus.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
setup-irq.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
setup-res.c	PCI: Add wrappers for dev_printk()	2018-01-18 12:55:24 -06:00
slot.c	PCI: Add SPDX GPL-2.0 when no license was specified	2018-01-26 11:45:16 -06:00
syscall.c	PCI: Deprecate pci_get_bus_and_slot()	2018-01-17 08:16:46 -06:00
vc.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00
vpd.c	PCI: Add SPDX GPL-2.0 when no license was specified	2018-01-26 11:45:16 -06:00
xen-pcifront.c	Merge branch 'pci/spdx' into next	2018-02-01 11:40:07 -06:00