mirror of
https://github.com/torvalds/linux.git
synced 2024-11-08 21:21:47 +00:00
db1dd4d376
Traditionally, changes to struct file->f_flags have been done under BKL protection, or with no protection at all. This patch causes all f_flags changes after file open/creation time to be done under protection of f_lock. This allows the removal of some BKL usage and fixes a number of longstanding (if microscopic) races. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2743 lines
87 KiB
C
2743 lines
87 KiB
C
/*******************************************************************************
|
|
*
|
|
* "swarm_cs4297a.c" -- Cirrus Logic-Crystal CS4297a linux audio driver.
|
|
*
|
|
* Copyright (C) 2001 Broadcom Corporation.
|
|
* Copyright (C) 2000,2001 Cirrus Logic Corp.
|
|
* -- adapted from drivers by Thomas Sailer,
|
|
* -- but don't bug him; Problems should go to:
|
|
* -- tom woller (twoller@crystal.cirrus.com) or
|
|
* (audio@crystal.cirrus.com).
|
|
* -- adapted from cs4281 PCI driver for cs4297a on
|
|
* BCM1250 Synchronous Serial interface
|
|
* (Kip Walker, Broadcom Corp.)
|
|
* Copyright (C) 2004 Maciej W. Rozycki
|
|
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Module command line parameters:
|
|
* none
|
|
*
|
|
* Supported devices:
|
|
* /dev/dsp standard /dev/dsp device, (mostly) OSS compatible
|
|
* /dev/mixer standard /dev/mixer device, (mostly) OSS compatible
|
|
* /dev/midi simple MIDI UART interface, no ioctl
|
|
*
|
|
* Modification History
|
|
* 08/20/00 trw - silence and no stopping DAC until release
|
|
* 08/23/00 trw - added CS_DBG statements, fix interrupt hang issue on DAC stop.
|
|
* 09/18/00 trw - added 16bit only record with conversion
|
|
* 09/24/00 trw - added Enhanced Full duplex (separate simultaneous
|
|
* capture/playback rates)
|
|
* 10/03/00 trw - fixed mmap (fixed GRECORD and the XMMS mmap test plugin
|
|
* libOSSm.so)
|
|
* 10/11/00 trw - modified for 2.4.0-test9 kernel enhancements (NR_MAP removal)
|
|
* 11/03/00 trw - fixed interrupt loss/stutter, added debug.
|
|
* 11/10/00 bkz - added __devinit to cs4297a_hw_init()
|
|
* 11/10/00 trw - fixed SMP and capture spinlock hang.
|
|
* 12/04/00 trw - cleaned up CSDEBUG flags and added "defaultorder" moduleparm.
|
|
* 12/05/00 trw - fixed polling (myth2), and added underrun swptr fix.
|
|
* 12/08/00 trw - added PM support.
|
|
* 12/14/00 trw - added wrapper code, builds under 2.4.0, 2.2.17-20, 2.2.17-8
|
|
* (RH/Dell base), 2.2.18, 2.2.12. cleaned up code mods by ident.
|
|
* 12/19/00 trw - added PM support for 2.2 base (apm_callback). other PM cleanup.
|
|
* 12/21/00 trw - added fractional "defaultorder" inputs. if >100 then use
|
|
* defaultorder-100 as power of 2 for the buffer size. example:
|
|
* 106 = 2^(106-100) = 2^6 = 64 bytes for the buffer size.
|
|
*
|
|
*******************************************************************************/
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sound.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/soundcard.h>
|
|
#include <linux/ac97_codec.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/kernel.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <asm/sibyte/sb1250_regs.h>
|
|
#include <asm/sibyte/sb1250_int.h>
|
|
#include <asm/sibyte/sb1250_dma.h>
|
|
#include <asm/sibyte/sb1250_scd.h>
|
|
#include <asm/sibyte/sb1250_syncser.h>
|
|
#include <asm/sibyte/sb1250_mac.h>
|
|
#include <asm/sibyte/sb1250.h>
|
|
|
|
struct cs4297a_state;
|
|
|
|
static void stop_dac(struct cs4297a_state *s);
|
|
static void stop_adc(struct cs4297a_state *s);
|
|
static void start_dac(struct cs4297a_state *s);
|
|
static void start_adc(struct cs4297a_state *s);
|
|
#undef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
#define CS4297a_MAGIC 0xf00beef1
|
|
|
|
// buffer order determines the size of the dma buffer for the driver.
|
|
// under Linux, a smaller buffer allows more responsiveness from many of the
|
|
// applications (e.g. games). A larger buffer allows some of the apps (esound)
|
|
// to not underrun the dma buffer as easily. As default, use 32k (order=3)
|
|
// rather than 64k as some of the games work more responsively.
|
|
// log base 2( buff sz = 32k).
|
|
|
|
//static unsigned long defaultorder = 3;
|
|
//MODULE_PARM(defaultorder, "i");
|
|
|
|
//
|
|
// Turn on/off debugging compilation by commenting out "#define CSDEBUG"
|
|
//
|
|
#define CSDEBUG 0
|
|
#if CSDEBUG
|
|
#define CSDEBUG_INTERFACE 1
|
|
#else
|
|
#undef CSDEBUG_INTERFACE
|
|
#endif
|
|
//
|
|
// cs_debugmask areas
|
|
//
|
|
#define CS_INIT 0x00000001 // initialization and probe functions
|
|
#define CS_ERROR 0x00000002 // tmp debugging bit placeholder
|
|
#define CS_INTERRUPT 0x00000004 // interrupt handler (separate from all other)
|
|
#define CS_FUNCTION 0x00000008 // enter/leave functions
|
|
#define CS_WAVE_WRITE 0x00000010 // write information for wave
|
|
#define CS_WAVE_READ 0x00000020 // read information for wave
|
|
#define CS_AC97 0x00000040 // AC97 register access
|
|
#define CS_DESCR 0x00000080 // descriptor management
|
|
#define CS_OPEN 0x00000400 // all open functions in the driver
|
|
#define CS_RELEASE 0x00000800 // all release functions in the driver
|
|
#define CS_PARMS 0x00001000 // functional and operational parameters
|
|
#define CS_IOCTL 0x00002000 // ioctl (non-mixer)
|
|
#define CS_TMP 0x10000000 // tmp debug mask bit
|
|
|
|
//
|
|
// CSDEBUG is usual mode is set to 1, then use the
|
|
// cs_debuglevel and cs_debugmask to turn on or off debugging.
|
|
// Debug level of 1 has been defined to be kernel errors and info
|
|
// that should be printed on any released driver.
|
|
//
|
|
#if CSDEBUG
|
|
#define CS_DBGOUT(mask,level,x) if((cs_debuglevel >= (level)) && ((mask) & cs_debugmask) ) {x;}
|
|
#else
|
|
#define CS_DBGOUT(mask,level,x)
|
|
#endif
|
|
|
|
#if CSDEBUG
|
|
static unsigned long cs_debuglevel = 4; // levels range from 1-9
|
|
static unsigned long cs_debugmask = CS_INIT /*| CS_IOCTL*/;
|
|
module_param(cs_debuglevel, int, 0);
|
|
module_param(cs_debugmask, int, 0);
|
|
#endif
|
|
#define CS_TRUE 1
|
|
#define CS_FALSE 0
|
|
|
|
#define CS_TYPE_ADC 0
|
|
#define CS_TYPE_DAC 1
|
|
|
|
#define SER_BASE (A_SER_BASE_1 + KSEG1)
|
|
#define SS_CSR(t) (SER_BASE+t)
|
|
#define SS_TXTBL(t) (SER_BASE+R_SER_TX_TABLE_BASE+(t*8))
|
|
#define SS_RXTBL(t) (SER_BASE+R_SER_RX_TABLE_BASE+(t*8))
|
|
|
|
#define FRAME_BYTES 32
|
|
#define FRAME_SAMPLE_BYTES 4
|
|
|
|
/* Should this be variable? */
|
|
#define SAMPLE_BUF_SIZE (16*1024)
|
|
#define SAMPLE_FRAME_COUNT (SAMPLE_BUF_SIZE / FRAME_SAMPLE_BYTES)
|
|
/* The driver can explode/shrink the frames to/from a smaller sample
|
|
buffer */
|
|
#define DMA_BLOAT_FACTOR 1
|
|
#define DMA_DESCR (SAMPLE_FRAME_COUNT / DMA_BLOAT_FACTOR)
|
|
#define DMA_BUF_SIZE (DMA_DESCR * FRAME_BYTES)
|
|
|
|
/* Use the maxmium count (255 == 5.1 ms between interrupts) */
|
|
#define DMA_INT_CNT ((1 << S_DMA_INT_PKTCNT) - 1)
|
|
|
|
/* Figure this out: how many TX DMAs ahead to schedule a reg access */
|
|
#define REG_LATENCY 150
|
|
|
|
#define FRAME_TX_US 20
|
|
|
|
#define SERDMA_NEXTBUF(d,f) (((d)->f+1) % (d)->ringsz)
|
|
|
|
static const char invalid_magic[] =
|
|
KERN_CRIT "cs4297a: invalid magic value\n";
|
|
|
|
#define VALIDATE_STATE(s) \
|
|
({ \
|
|
if (!(s) || (s)->magic != CS4297a_MAGIC) { \
|
|
printk(invalid_magic); \
|
|
return -ENXIO; \
|
|
} \
|
|
})
|
|
|
|
struct list_head cs4297a_devs = { &cs4297a_devs, &cs4297a_devs };
|
|
|
|
typedef struct serdma_descr_s {
|
|
u64 descr_a;
|
|
u64 descr_b;
|
|
} serdma_descr_t;
|
|
|
|
typedef unsigned long paddr_t;
|
|
|
|
typedef struct serdma_s {
|
|
unsigned ringsz;
|
|
serdma_descr_t *descrtab;
|
|
serdma_descr_t *descrtab_end;
|
|
paddr_t descrtab_phys;
|
|
|
|
serdma_descr_t *descr_add;
|
|
serdma_descr_t *descr_rem;
|
|
|
|
u64 *dma_buf; // buffer for DMA contents (frames)
|
|
paddr_t dma_buf_phys;
|
|
u16 *sample_buf; // tmp buffer for sample conversions
|
|
u16 *sb_swptr;
|
|
u16 *sb_hwptr;
|
|
u16 *sb_end;
|
|
|
|
dma_addr_t dmaaddr;
|
|
// unsigned buforder; // Log base 2 of 'dma_buf' size in bytes..
|
|
unsigned numfrag; // # of 'fragments' in the buffer.
|
|
unsigned fragshift; // Log base 2 of fragment size.
|
|
unsigned hwptr, swptr;
|
|
unsigned total_bytes; // # bytes process since open.
|
|
unsigned blocks; // last returned blocks value GETOPTR
|
|
unsigned wakeup; // interrupt occurred on block
|
|
int count;
|
|
unsigned underrun; // underrun flag
|
|
unsigned error; // over/underrun
|
|
wait_queue_head_t wait;
|
|
wait_queue_head_t reg_wait;
|
|
// redundant, but makes calculations easier
|
|
unsigned fragsize; // 2**fragshift..
|
|
unsigned sbufsz; // 2**buforder.
|
|
unsigned fragsamples;
|
|
// OSS stuff
|
|
unsigned mapped:1; // Buffer mapped in cs4297a_mmap()?
|
|
unsigned ready:1; // prog_dmabuf_dac()/adc() successful?
|
|
unsigned endcleared:1;
|
|
unsigned type:1; // adc or dac buffer (CS_TYPE_XXX)
|
|
unsigned ossfragshift;
|
|
int ossmaxfrags;
|
|
unsigned subdivision;
|
|
} serdma_t;
|
|
|
|
struct cs4297a_state {
|
|
// magic
|
|
unsigned int magic;
|
|
|
|
struct list_head list;
|
|
|
|
// soundcore stuff
|
|
int dev_audio;
|
|
int dev_mixer;
|
|
|
|
// hardware resources
|
|
unsigned int irq;
|
|
|
|
struct {
|
|
unsigned int rx_ovrrn; /* FIFO */
|
|
unsigned int rx_overflow; /* staging buffer */
|
|
unsigned int tx_underrun;
|
|
unsigned int rx_bad;
|
|
unsigned int rx_good;
|
|
} stats;
|
|
|
|
// mixer registers
|
|
struct {
|
|
unsigned short vol[10];
|
|
unsigned int recsrc;
|
|
unsigned int modcnt;
|
|
unsigned short micpreamp;
|
|
} mix;
|
|
|
|
// wave stuff
|
|
struct properties {
|
|
unsigned fmt;
|
|
unsigned fmt_original; // original requested format
|
|
unsigned channels;
|
|
unsigned rate;
|
|
} prop_dac, prop_adc;
|
|
unsigned conversion:1; // conversion from 16 to 8 bit in progress
|
|
unsigned ena;
|
|
spinlock_t lock;
|
|
struct mutex open_mutex;
|
|
struct mutex open_sem_adc;
|
|
struct mutex open_sem_dac;
|
|
fmode_t open_mode;
|
|
wait_queue_head_t open_wait;
|
|
wait_queue_head_t open_wait_adc;
|
|
wait_queue_head_t open_wait_dac;
|
|
|
|
dma_addr_t dmaaddr_sample_buf;
|
|
unsigned buforder_sample_buf; // Log base 2 of 'dma_buf' size in bytes..
|
|
|
|
serdma_t dma_dac, dma_adc;
|
|
|
|
volatile u16 read_value;
|
|
volatile u16 read_reg;
|
|
volatile u64 reg_request;
|
|
};
|
|
|
|
#if 1
|
|
#define prog_codec(a,b)
|
|
#define dealloc_dmabuf(a,b);
|
|
#endif
|
|
|
|
static int prog_dmabuf_adc(struct cs4297a_state *s)
|
|
{
|
|
s->dma_adc.ready = 1;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int prog_dmabuf_dac(struct cs4297a_state *s)
|
|
{
|
|
s->dma_dac.ready = 1;
|
|
return 0;
|
|
}
|
|
|
|
static void clear_advance(void *buf, unsigned bsize, unsigned bptr,
|
|
unsigned len, unsigned char c)
|
|
{
|
|
if (bptr + len > bsize) {
|
|
unsigned x = bsize - bptr;
|
|
memset(((char *) buf) + bptr, c, x);
|
|
bptr = 0;
|
|
len -= x;
|
|
}
|
|
CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO
|
|
"cs4297a: clear_advance(): memset %d at 0x%.8x for %d size \n",
|
|
(unsigned)c, (unsigned)((char *) buf) + bptr, len));
|
|
memset(((char *) buf) + bptr, c, len);
|
|
}
|
|
|
|
#if CSDEBUG
|
|
|
|
// DEBUG ROUTINES
|
|
|
|
#define SOUND_MIXER_CS_GETDBGLEVEL _SIOWR('M',120, int)
|
|
#define SOUND_MIXER_CS_SETDBGLEVEL _SIOWR('M',121, int)
|
|
#define SOUND_MIXER_CS_GETDBGMASK _SIOWR('M',122, int)
|
|
#define SOUND_MIXER_CS_SETDBGMASK _SIOWR('M',123, int)
|
|
|
|
static void cs_printioctl(unsigned int x)
|
|
{
|
|
unsigned int i;
|
|
unsigned char vidx;
|
|
// Index of mixtable1[] member is Device ID
|
|
// and must be <= SOUND_MIXER_NRDEVICES.
|
|
// Value of array member is index into s->mix.vol[]
|
|
static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = {
|
|
[SOUND_MIXER_PCM] = 1, // voice
|
|
[SOUND_MIXER_LINE1] = 2, // AUX
|
|
[SOUND_MIXER_CD] = 3, // CD
|
|
[SOUND_MIXER_LINE] = 4, // Line
|
|
[SOUND_MIXER_SYNTH] = 5, // FM
|
|
[SOUND_MIXER_MIC] = 6, // Mic
|
|
[SOUND_MIXER_SPEAKER] = 7, // Speaker
|
|
[SOUND_MIXER_RECLEV] = 8, // Recording level
|
|
[SOUND_MIXER_VOLUME] = 9 // Master Volume
|
|
};
|
|
|
|
switch (x) {
|
|
case SOUND_MIXER_CS_GETDBGMASK:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_CS_GETDBGMASK:\n"));
|
|
break;
|
|
case SOUND_MIXER_CS_GETDBGLEVEL:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_CS_GETDBGLEVEL:\n"));
|
|
break;
|
|
case SOUND_MIXER_CS_SETDBGMASK:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_CS_SETDBGMASK:\n"));
|
|
break;
|
|
case SOUND_MIXER_CS_SETDBGLEVEL:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_CS_SETDBGLEVEL:\n"));
|
|
break;
|
|
case OSS_GETVERSION:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("OSS_GETVERSION:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SYNC:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SYNC:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETDUPLEX:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETDUPLEX:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETCAPS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETCAPS:\n"));
|
|
break;
|
|
case SNDCTL_DSP_RESET:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_RESET:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SPEED:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SPEED:\n"));
|
|
break;
|
|
case SNDCTL_DSP_STEREO:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_STEREO:\n"));
|
|
break;
|
|
case SNDCTL_DSP_CHANNELS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_CHANNELS:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETFMTS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETFMTS:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETFMT:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETFMT:\n"));
|
|
break;
|
|
case SNDCTL_DSP_POST:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_POST:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETTRIGGER:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETTRIGGER:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETTRIGGER:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETTRIGGER:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETOSPACE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOSPACE:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETISPACE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETISPACE:\n"));
|
|
break;
|
|
case SNDCTL_DSP_NONBLOCK:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_NONBLOCK:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETODELAY:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETODELAY:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETIPTR:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETIPTR:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETOPTR:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOPTR:\n"));
|
|
break;
|
|
case SNDCTL_DSP_GETBLKSIZE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETBLKSIZE:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETFRAGMENT:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SNDCTL_DSP_SETFRAGMENT:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SUBDIVIDE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SUBDIVIDE:\n"));
|
|
break;
|
|
case SOUND_PCM_READ_RATE:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_RATE:\n"));
|
|
break;
|
|
case SOUND_PCM_READ_CHANNELS:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_PCM_READ_CHANNELS:\n"));
|
|
break;
|
|
case SOUND_PCM_READ_BITS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_BITS:\n"));
|
|
break;
|
|
case SOUND_PCM_WRITE_FILTER:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_PCM_WRITE_FILTER:\n"));
|
|
break;
|
|
case SNDCTL_DSP_SETSYNCRO:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETSYNCRO:\n"));
|
|
break;
|
|
case SOUND_PCM_READ_FILTER:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_FILTER:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE1:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE1:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE2:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE2:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE3:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE3:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE4:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE4:\n"));
|
|
break;
|
|
case SOUND_MIXER_PRIVATE5:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE5:\n"));
|
|
break;
|
|
case SOUND_MIXER_INFO:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_INFO:\n"));
|
|
break;
|
|
case SOUND_OLD_MIXER_INFO:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_OLD_MIXER_INFO:\n"));
|
|
break;
|
|
|
|
default:
|
|
switch (_IOC_NR(x)) {
|
|
case SOUND_MIXER_VOLUME:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_VOLUME:\n"));
|
|
break;
|
|
case SOUND_MIXER_SPEAKER:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_SPEAKER:\n"));
|
|
break;
|
|
case SOUND_MIXER_RECLEV:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_RECLEV:\n"));
|
|
break;
|
|
case SOUND_MIXER_MIC:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_MIC:\n"));
|
|
break;
|
|
case SOUND_MIXER_SYNTH:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_SYNTH:\n"));
|
|
break;
|
|
case SOUND_MIXER_RECSRC:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_RECSRC:\n"));
|
|
break;
|
|
case SOUND_MIXER_DEVMASK:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_DEVMASK:\n"));
|
|
break;
|
|
case SOUND_MIXER_RECMASK:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_RECMASK:\n"));
|
|
break;
|
|
case SOUND_MIXER_STEREODEVS:
|
|
CS_DBGOUT(CS_IOCTL, 4,
|
|
printk("SOUND_MIXER_STEREODEVS:\n"));
|
|
break;
|
|
case SOUND_MIXER_CAPS:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_CAPS:\n"));
|
|
break;
|
|
default:
|
|
i = _IOC_NR(x);
|
|
if (i >= SOUND_MIXER_NRDEVICES
|
|
|| !(vidx = mixtable1[i])) {
|
|
CS_DBGOUT(CS_IOCTL, 4, printk
|
|
("UNKNOWN IOCTL: 0x%.8x NR=%d\n",
|
|
x, i));
|
|
} else {
|
|
CS_DBGOUT(CS_IOCTL, 4, printk
|
|
("SOUND_MIXER_IOCTL AC9x: 0x%.8x NR=%d\n",
|
|
x, i));
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
static int ser_init(struct cs4297a_state *s)
|
|
{
|
|
int i;
|
|
|
|
CS_DBGOUT(CS_INIT, 2,
|
|
printk(KERN_INFO "cs4297a: Setting up serial parameters\n"));
|
|
|
|
__raw_writeq(M_SYNCSER_CMD_RX_RESET | M_SYNCSER_CMD_TX_RESET, SS_CSR(R_SER_CMD));
|
|
|
|
__raw_writeq(M_SYNCSER_MSB_FIRST, SS_CSR(R_SER_MODE));
|
|
__raw_writeq(32, SS_CSR(R_SER_MINFRM_SZ));
|
|
__raw_writeq(32, SS_CSR(R_SER_MAXFRM_SZ));
|
|
|
|
__raw_writeq(1, SS_CSR(R_SER_TX_RD_THRSH));
|
|
__raw_writeq(4, SS_CSR(R_SER_TX_WR_THRSH));
|
|
__raw_writeq(8, SS_CSR(R_SER_RX_RD_THRSH));
|
|
|
|
/* This looks good from experimentation */
|
|
__raw_writeq((M_SYNCSER_TXSYNC_INT | V_SYNCSER_TXSYNC_DLY(0) | M_SYNCSER_TXCLK_EXT |
|
|
M_SYNCSER_RXSYNC_INT | V_SYNCSER_RXSYNC_DLY(1) | M_SYNCSER_RXCLK_EXT | M_SYNCSER_RXSYNC_EDGE),
|
|
SS_CSR(R_SER_LINE_MODE));
|
|
|
|
/* This looks good from experimentation */
|
|
__raw_writeq(V_SYNCSER_SEQ_COUNT(14) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE,
|
|
SS_TXTBL(0));
|
|
__raw_writeq(V_SYNCSER_SEQ_COUNT(15) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
|
|
SS_TXTBL(1));
|
|
__raw_writeq(V_SYNCSER_SEQ_COUNT(13) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
|
|
SS_TXTBL(2));
|
|
__raw_writeq(V_SYNCSER_SEQ_COUNT( 0) | M_SYNCSER_SEQ_ENABLE |
|
|
M_SYNCSER_SEQ_STROBE | M_SYNCSER_SEQ_LAST, SS_TXTBL(3));
|
|
|
|
__raw_writeq(V_SYNCSER_SEQ_COUNT(14) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE,
|
|
SS_RXTBL(0));
|
|
__raw_writeq(V_SYNCSER_SEQ_COUNT(15) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
|
|
SS_RXTBL(1));
|
|
__raw_writeq(V_SYNCSER_SEQ_COUNT(13) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE,
|
|
SS_RXTBL(2));
|
|
__raw_writeq(V_SYNCSER_SEQ_COUNT( 0) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE |
|
|
M_SYNCSER_SEQ_LAST, SS_RXTBL(3));
|
|
|
|
for (i=4; i<16; i++) {
|
|
/* Just in case... */
|
|
__raw_writeq(M_SYNCSER_SEQ_LAST, SS_TXTBL(i));
|
|
__raw_writeq(M_SYNCSER_SEQ_LAST, SS_RXTBL(i));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int init_serdma(serdma_t *dma)
|
|
{
|
|
CS_DBGOUT(CS_INIT, 2,
|
|
printk(KERN_ERR "cs4297a: desc - %d sbufsize - %d dbufsize - %d\n",
|
|
DMA_DESCR, SAMPLE_BUF_SIZE, DMA_BUF_SIZE));
|
|
|
|
/* Descriptors */
|
|
dma->ringsz = DMA_DESCR;
|
|
dma->descrtab = kzalloc(dma->ringsz * sizeof(serdma_descr_t), GFP_KERNEL);
|
|
if (!dma->descrtab) {
|
|
printk(KERN_ERR "cs4297a: kzalloc descrtab failed\n");
|
|
return -1;
|
|
}
|
|
dma->descrtab_end = dma->descrtab + dma->ringsz;
|
|
/* XXX bloddy mess, use proper DMA API here ... */
|
|
dma->descrtab_phys = CPHYSADDR((long)dma->descrtab);
|
|
dma->descr_add = dma->descr_rem = dma->descrtab;
|
|
|
|
/* Frame buffer area */
|
|
dma->dma_buf = kzalloc(DMA_BUF_SIZE, GFP_KERNEL);
|
|
if (!dma->dma_buf) {
|
|
printk(KERN_ERR "cs4297a: kzalloc dma_buf failed\n");
|
|
kfree(dma->descrtab);
|
|
return -1;
|
|
}
|
|
dma->dma_buf_phys = CPHYSADDR((long)dma->dma_buf);
|
|
|
|
/* Samples buffer area */
|
|
dma->sbufsz = SAMPLE_BUF_SIZE;
|
|
dma->sample_buf = kmalloc(dma->sbufsz, GFP_KERNEL);
|
|
if (!dma->sample_buf) {
|
|
printk(KERN_ERR "cs4297a: kmalloc sample_buf failed\n");
|
|
kfree(dma->descrtab);
|
|
kfree(dma->dma_buf);
|
|
return -1;
|
|
}
|
|
dma->sb_swptr = dma->sb_hwptr = dma->sample_buf;
|
|
dma->sb_end = (u16 *)((void *)dma->sample_buf + dma->sbufsz);
|
|
dma->fragsize = dma->sbufsz >> 1;
|
|
|
|
CS_DBGOUT(CS_INIT, 4,
|
|
printk(KERN_ERR "cs4297a: descrtab - %08x dma_buf - %x sample_buf - %x\n",
|
|
(int)dma->descrtab, (int)dma->dma_buf,
|
|
(int)dma->sample_buf));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dma_init(struct cs4297a_state *s)
|
|
{
|
|
int i;
|
|
|
|
CS_DBGOUT(CS_INIT, 2,
|
|
printk(KERN_INFO "cs4297a: Setting up DMA\n"));
|
|
|
|
if (init_serdma(&s->dma_adc) ||
|
|
init_serdma(&s->dma_dac))
|
|
return -1;
|
|
|
|
if (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_RX))||
|
|
__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) {
|
|
panic("DMA state corrupted?!");
|
|
}
|
|
|
|
/* Initialize now - the descr/buffer pairings will never
|
|
change... */
|
|
for (i=0; i<DMA_DESCR; i++) {
|
|
s->dma_dac.descrtab[i].descr_a = M_DMA_SERRX_SOP | V_DMA_DSCRA_A_SIZE(1) |
|
|
(s->dma_dac.dma_buf_phys + i*FRAME_BYTES);
|
|
s->dma_dac.descrtab[i].descr_b = V_DMA_DSCRB_PKT_SIZE(FRAME_BYTES);
|
|
s->dma_adc.descrtab[i].descr_a = V_DMA_DSCRA_A_SIZE(1) |
|
|
(s->dma_adc.dma_buf_phys + i*FRAME_BYTES);
|
|
s->dma_adc.descrtab[i].descr_b = 0;
|
|
}
|
|
|
|
__raw_writeq((M_DMA_EOP_INT_EN | V_DMA_INT_PKTCNT(DMA_INT_CNT) |
|
|
V_DMA_RINGSZ(DMA_DESCR) | M_DMA_TDX_EN),
|
|
SS_CSR(R_SER_DMA_CONFIG0_RX));
|
|
__raw_writeq(M_DMA_L2CA, SS_CSR(R_SER_DMA_CONFIG1_RX));
|
|
__raw_writeq(s->dma_adc.descrtab_phys, SS_CSR(R_SER_DMA_DSCR_BASE_RX));
|
|
|
|
__raw_writeq(V_DMA_RINGSZ(DMA_DESCR), SS_CSR(R_SER_DMA_CONFIG0_TX));
|
|
__raw_writeq(M_DMA_L2CA | M_DMA_NO_DSCR_UPDT, SS_CSR(R_SER_DMA_CONFIG1_TX));
|
|
__raw_writeq(s->dma_dac.descrtab_phys, SS_CSR(R_SER_DMA_DSCR_BASE_TX));
|
|
|
|
/* Prep the receive DMA descriptor ring */
|
|
__raw_writeq(DMA_DESCR, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
|
|
|
|
__raw_writeq(M_SYNCSER_DMA_RX_EN | M_SYNCSER_DMA_TX_EN, SS_CSR(R_SER_DMA_ENABLE));
|
|
|
|
__raw_writeq((M_SYNCSER_RX_SYNC_ERR | M_SYNCSER_RX_OVERRUN | M_SYNCSER_RX_EOP_COUNT),
|
|
SS_CSR(R_SER_INT_MASK));
|
|
|
|
/* Enable the rx/tx; let the codec warm up to the sync and
|
|
start sending good frames before the receive FIFO is
|
|
enabled */
|
|
__raw_writeq(M_SYNCSER_CMD_TX_EN, SS_CSR(R_SER_CMD));
|
|
udelay(1000);
|
|
__raw_writeq(M_SYNCSER_CMD_RX_EN | M_SYNCSER_CMD_TX_EN, SS_CSR(R_SER_CMD));
|
|
|
|
/* XXXKW is this magic? (the "1" part) */
|
|
while ((__raw_readq(SS_CSR(R_SER_STATUS)) & 0xf1) != 1)
|
|
;
|
|
|
|
CS_DBGOUT(CS_INIT, 4,
|
|
printk(KERN_INFO "cs4297a: status: %08x\n",
|
|
(unsigned int)(__raw_readq(SS_CSR(R_SER_STATUS)) & 0xffffffff)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serdma_reg_access(struct cs4297a_state *s, u64 data)
|
|
{
|
|
serdma_t *d = &s->dma_dac;
|
|
u64 *data_p;
|
|
unsigned swptr;
|
|
unsigned long flags;
|
|
serdma_descr_t *descr;
|
|
|
|
if (s->reg_request) {
|
|
printk(KERN_ERR "cs4297a: attempt to issue multiple reg_access\n");
|
|
return -1;
|
|
}
|
|
|
|
if (s->ena & FMODE_WRITE) {
|
|
/* Since a writer has the DSP open, we have to mux the
|
|
request in */
|
|
s->reg_request = data;
|
|
interruptible_sleep_on(&s->dma_dac.reg_wait);
|
|
/* XXXKW how can I deal with the starvation case where
|
|
the opener isn't writing? */
|
|
} else {
|
|
/* Be safe when changing ring pointers */
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (d->hwptr != d->swptr) {
|
|
printk(KERN_ERR "cs4297a: reg access found bookkeeping error (hw/sw = %d/%d\n",
|
|
d->hwptr, d->swptr);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return -1;
|
|
}
|
|
swptr = d->swptr;
|
|
d->hwptr = d->swptr = (d->swptr + 1) % d->ringsz;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
|
|
descr = &d->descrtab[swptr];
|
|
data_p = &d->dma_buf[swptr * 4];
|
|
*data_p = cpu_to_be64(data);
|
|
__raw_writeq(1, SS_CSR(R_SER_DMA_DSCR_COUNT_TX));
|
|
CS_DBGOUT(CS_DESCR, 4,
|
|
printk(KERN_INFO "cs4297a: add_tx %p (%x -> %x)\n",
|
|
data_p, swptr, d->hwptr));
|
|
}
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 6,
|
|
printk(KERN_INFO "cs4297a: serdma_reg_access()-\n"));
|
|
|
|
return 0;
|
|
}
|
|
|
|
//****************************************************************************
|
|
// "cs4297a_read_ac97" -- Reads an AC97 register
|
|
//****************************************************************************
|
|
static int cs4297a_read_ac97(struct cs4297a_state *s, u32 offset,
|
|
u32 * value)
|
|
{
|
|
CS_DBGOUT(CS_AC97, 1,
|
|
printk(KERN_INFO "cs4297a: read reg %2x\n", offset));
|
|
if (serdma_reg_access(s, (0xCLL << 60) | (1LL << 47) | ((u64)(offset & 0x7F) << 40)))
|
|
return -1;
|
|
|
|
interruptible_sleep_on(&s->dma_adc.reg_wait);
|
|
*value = s->read_value;
|
|
CS_DBGOUT(CS_AC97, 2,
|
|
printk(KERN_INFO "cs4297a: rdr reg %x -> %x\n", s->read_reg, s->read_value));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
//****************************************************************************
|
|
// "cs4297a_write_ac97()"-- writes an AC97 register
|
|
//****************************************************************************
|
|
static int cs4297a_write_ac97(struct cs4297a_state *s, u32 offset,
|
|
u32 value)
|
|
{
|
|
CS_DBGOUT(CS_AC97, 1,
|
|
printk(KERN_INFO "cs4297a: write reg %2x -> %04x\n", offset, value));
|
|
return (serdma_reg_access(s, (0xELL << 60) | ((u64)(offset & 0x7F) << 40) | ((value & 0xffff) << 12)));
|
|
}
|
|
|
|
static void stop_dac(struct cs4297a_state *s)
|
|
{
|
|
unsigned long flags;
|
|
|
|
CS_DBGOUT(CS_WAVE_WRITE, 3, printk(KERN_INFO "cs4297a: stop_dac():\n"));
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->ena &= ~FMODE_WRITE;
|
|
#if 0
|
|
/* XXXKW what do I really want here? My theory for now is
|
|
that I just flip the "ena" bit, and the interrupt handler
|
|
will stop processing the xmit channel */
|
|
__raw_writeq((s->ena & FMODE_READ) ? M_SYNCSER_DMA_RX_EN : 0,
|
|
SS_CSR(R_SER_DMA_ENABLE));
|
|
#endif
|
|
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
}
|
|
|
|
|
|
static void start_dac(struct cs4297a_state *s)
|
|
{
|
|
unsigned long flags;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 3, printk(KERN_INFO "cs4297a: start_dac()+\n"));
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (!(s->ena & FMODE_WRITE) && (s->dma_dac.mapped ||
|
|
(s->dma_dac.count > 0
|
|
&& s->dma_dac.ready))) {
|
|
s->ena |= FMODE_WRITE;
|
|
/* XXXKW what do I really want here? My theory for
|
|
now is that I just flip the "ena" bit, and the
|
|
interrupt handler will start processing the xmit
|
|
channel */
|
|
|
|
CS_DBGOUT(CS_WAVE_WRITE | CS_PARMS, 8, printk(KERN_INFO
|
|
"cs4297a: start_dac(): start dma\n"));
|
|
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
CS_DBGOUT(CS_FUNCTION, 3,
|
|
printk(KERN_INFO "cs4297a: start_dac()-\n"));
|
|
}
|
|
|
|
|
|
static void stop_adc(struct cs4297a_state *s)
|
|
{
|
|
unsigned long flags;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 3,
|
|
printk(KERN_INFO "cs4297a: stop_adc()+\n"));
|
|
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->ena &= ~FMODE_READ;
|
|
|
|
if (s->conversion == 1) {
|
|
s->conversion = 0;
|
|
s->prop_adc.fmt = s->prop_adc.fmt_original;
|
|
}
|
|
/* Nothing to do really, I need to keep the DMA going
|
|
XXXKW when do I get here, and is there more I should do? */
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
CS_DBGOUT(CS_FUNCTION, 3,
|
|
printk(KERN_INFO "cs4297a: stop_adc()-\n"));
|
|
}
|
|
|
|
|
|
static void start_adc(struct cs4297a_state *s)
|
|
{
|
|
unsigned long flags;
|
|
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4297a: start_adc()+\n"));
|
|
|
|
if (!(s->ena & FMODE_READ) &&
|
|
(s->dma_adc.mapped || s->dma_adc.count <=
|
|
(signed) (s->dma_adc.sbufsz - 2 * s->dma_adc.fragsize))
|
|
&& s->dma_adc.ready) {
|
|
if (s->prop_adc.fmt & AFMT_S8 || s->prop_adc.fmt & AFMT_U8) {
|
|
//
|
|
// now only use 16 bit capture, due to truncation issue
|
|
// in the chip, noticable distortion occurs.
|
|
// allocate buffer and then convert from 16 bit to
|
|
// 8 bit for the user buffer.
|
|
//
|
|
s->prop_adc.fmt_original = s->prop_adc.fmt;
|
|
if (s->prop_adc.fmt & AFMT_S8) {
|
|
s->prop_adc.fmt &= ~AFMT_S8;
|
|
s->prop_adc.fmt |= AFMT_S16_LE;
|
|
}
|
|
if (s->prop_adc.fmt & AFMT_U8) {
|
|
s->prop_adc.fmt &= ~AFMT_U8;
|
|
s->prop_adc.fmt |= AFMT_U16_LE;
|
|
}
|
|
//
|
|
// prog_dmabuf_adc performs a stop_adc() but that is
|
|
// ok since we really haven't started the DMA yet.
|
|
//
|
|
prog_codec(s, CS_TYPE_ADC);
|
|
|
|
prog_dmabuf_adc(s);
|
|
s->conversion = 1;
|
|
}
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
s->ena |= FMODE_READ;
|
|
/* Nothing to do really, I am probably already
|
|
DMAing... XXXKW when do I get here, and is there
|
|
more I should do? */
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
|
|
CS_DBGOUT(CS_PARMS, 6, printk(KERN_INFO
|
|
"cs4297a: start_adc(): start adc\n"));
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4297a: start_adc()-\n"));
|
|
|
|
}
|
|
|
|
|
|
// call with spinlock held!
|
|
static void cs4297a_update_ptr(struct cs4297a_state *s, int intflag)
|
|
{
|
|
int good_diff, diff, diff2;
|
|
u64 *data_p, data;
|
|
u32 *s_ptr;
|
|
unsigned hwptr;
|
|
u32 status;
|
|
serdma_t *d;
|
|
serdma_descr_t *descr;
|
|
|
|
// update ADC pointer
|
|
status = intflag ? __raw_readq(SS_CSR(R_SER_STATUS)) : 0;
|
|
|
|
if ((s->ena & FMODE_READ) || (status & (M_SYNCSER_RX_EOP_COUNT))) {
|
|
d = &s->dma_adc;
|
|
hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
|
|
d->descrtab_phys) / sizeof(serdma_descr_t));
|
|
|
|
if (s->ena & FMODE_READ) {
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4297a: upd_rcv sw->hw->hw %x/%x/%x (int-%d)n",
|
|
d->swptr, d->hwptr, hwptr, intflag));
|
|
/* Number of DMA buffers available for software: */
|
|
diff2 = diff = (d->ringsz + hwptr - d->hwptr) % d->ringsz;
|
|
d->hwptr = hwptr;
|
|
good_diff = 0;
|
|
s_ptr = (u32 *)&(d->dma_buf[d->swptr*4]);
|
|
descr = &d->descrtab[d->swptr];
|
|
while (diff2--) {
|
|
u64 data = be64_to_cpu(*(u64 *)s_ptr);
|
|
u64 descr_a;
|
|
u16 left, right;
|
|
descr_a = descr->descr_a;
|
|
descr->descr_a &= ~M_DMA_SERRX_SOP;
|
|
if ((descr_a & M_DMA_DSCRA_A_ADDR) != CPHYSADDR((long)s_ptr)) {
|
|
printk(KERN_ERR "cs4297a: RX Bad address (read)\n");
|
|
}
|
|
if (((data & 0x9800000000000000) != 0x9800000000000000) ||
|
|
(!(descr_a & M_DMA_SERRX_SOP)) ||
|
|
(G_DMA_DSCRB_PKT_SIZE(descr->descr_b) != FRAME_BYTES)) {
|
|
s->stats.rx_bad++;
|
|
printk(KERN_DEBUG "cs4297a: RX Bad attributes (read)\n");
|
|
continue;
|
|
}
|
|
s->stats.rx_good++;
|
|
if ((data >> 61) == 7) {
|
|
s->read_value = (data >> 12) & 0xffff;
|
|
s->read_reg = (data >> 40) & 0x7f;
|
|
wake_up(&d->reg_wait);
|
|
}
|
|
if (d->count && (d->sb_hwptr == d->sb_swptr)) {
|
|
s->stats.rx_overflow++;
|
|
printk(KERN_DEBUG "cs4297a: RX overflow\n");
|
|
continue;
|
|
}
|
|
good_diff++;
|
|
left = ((be32_to_cpu(s_ptr[1]) & 0xff) << 8) |
|
|
((be32_to_cpu(s_ptr[2]) >> 24) & 0xff);
|
|
right = (be32_to_cpu(s_ptr[2]) >> 4) & 0xffff;
|
|
*d->sb_hwptr++ = cpu_to_be16(left);
|
|
*d->sb_hwptr++ = cpu_to_be16(right);
|
|
if (d->sb_hwptr == d->sb_end)
|
|
d->sb_hwptr = d->sample_buf;
|
|
descr++;
|
|
if (descr == d->descrtab_end) {
|
|
descr = d->descrtab;
|
|
s_ptr = (u32 *)s->dma_adc.dma_buf;
|
|
} else {
|
|
s_ptr += 8;
|
|
}
|
|
}
|
|
d->total_bytes += good_diff * FRAME_SAMPLE_BYTES;
|
|
d->count += good_diff * FRAME_SAMPLE_BYTES;
|
|
if (d->count > d->sbufsz) {
|
|
printk(KERN_ERR "cs4297a: bogus receive overflow!!\n");
|
|
}
|
|
d->swptr = (d->swptr + diff) % d->ringsz;
|
|
__raw_writeq(diff, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
|
|
if (d->mapped) {
|
|
if (d->count >= (signed) d->fragsize)
|
|
wake_up(&d->wait);
|
|
} else {
|
|
if (d->count > 0) {
|
|
CS_DBGOUT(CS_WAVE_READ, 4,
|
|
printk(KERN_INFO
|
|
"cs4297a: update count -> %d\n", d->count));
|
|
wake_up(&d->wait);
|
|
}
|
|
}
|
|
} else {
|
|
/* Receive is going even if no one is
|
|
listening (for register accesses and to
|
|
avoid FIFO overrun) */
|
|
diff2 = diff = (hwptr + d->ringsz - d->hwptr) % d->ringsz;
|
|
if (!diff) {
|
|
printk(KERN_ERR "cs4297a: RX full or empty?\n");
|
|
}
|
|
|
|
descr = &d->descrtab[d->swptr];
|
|
data_p = &d->dma_buf[d->swptr*4];
|
|
|
|
/* Force this to happen at least once; I got
|
|
here because of an interrupt, so there must
|
|
be a buffer to process. */
|
|
do {
|
|
data = be64_to_cpu(*data_p);
|
|
if ((descr->descr_a & M_DMA_DSCRA_A_ADDR) != CPHYSADDR((long)data_p)) {
|
|
printk(KERN_ERR "cs4297a: RX Bad address %d (%llx %lx)\n", d->swptr,
|
|
(long long)(descr->descr_a & M_DMA_DSCRA_A_ADDR),
|
|
(long)CPHYSADDR((long)data_p));
|
|
}
|
|
if (!(data & (1LL << 63)) ||
|
|
!(descr->descr_a & M_DMA_SERRX_SOP) ||
|
|
(G_DMA_DSCRB_PKT_SIZE(descr->descr_b) != FRAME_BYTES)) {
|
|
s->stats.rx_bad++;
|
|
printk(KERN_DEBUG "cs4297a: RX Bad attributes\n");
|
|
} else {
|
|
s->stats.rx_good++;
|
|
if ((data >> 61) == 7) {
|
|
s->read_value = (data >> 12) & 0xffff;
|
|
s->read_reg = (data >> 40) & 0x7f;
|
|
wake_up(&d->reg_wait);
|
|
}
|
|
}
|
|
descr->descr_a &= ~M_DMA_SERRX_SOP;
|
|
descr++;
|
|
d->swptr++;
|
|
data_p += 4;
|
|
if (descr == d->descrtab_end) {
|
|
descr = d->descrtab;
|
|
d->swptr = 0;
|
|
data_p = d->dma_buf;
|
|
}
|
|
__raw_writeq(1, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
|
|
} while (--diff);
|
|
d->hwptr = hwptr;
|
|
|
|
CS_DBGOUT(CS_DESCR, 6,
|
|
printk(KERN_INFO "cs4297a: hw/sw %x/%x\n", d->hwptr, d->swptr));
|
|
}
|
|
|
|
CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO
|
|
"cs4297a: cs4297a_update_ptr(): s=0x%.8x hwptr=%d total_bytes=%d count=%d \n",
|
|
(unsigned)s, d->hwptr,
|
|
d->total_bytes, d->count));
|
|
}
|
|
|
|
/* XXXKW worry about s->reg_request -- there is a starvation
|
|
case if s->ena has FMODE_WRITE on, but the client isn't
|
|
doing writes */
|
|
|
|
// update DAC pointer
|
|
//
|
|
// check for end of buffer, means that we are going to wait for another interrupt
|
|
// to allow silence to fill the fifos on the part, to keep pops down to a minimum.
|
|
//
|
|
if (s->ena & FMODE_WRITE) {
|
|
serdma_t *d = &s->dma_dac;
|
|
hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
|
|
d->descrtab_phys) / sizeof(serdma_descr_t));
|
|
diff = (d->ringsz + hwptr - d->hwptr) % d->ringsz;
|
|
CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_update_ptr(): hw/hw/sw %x/%x/%x diff %d count %d\n",
|
|
d->hwptr, hwptr, d->swptr, diff, d->count));
|
|
d->hwptr = hwptr;
|
|
/* XXXKW stereo? conversion? Just assume 2 16-bit samples for now */
|
|
d->total_bytes += diff * FRAME_SAMPLE_BYTES;
|
|
if (d->mapped) {
|
|
d->count += diff * FRAME_SAMPLE_BYTES;
|
|
if (d->count >= d->fragsize) {
|
|
d->wakeup = 1;
|
|
wake_up(&d->wait);
|
|
if (d->count > d->sbufsz)
|
|
d->count &= d->sbufsz - 1;
|
|
}
|
|
} else {
|
|
d->count -= diff * FRAME_SAMPLE_BYTES;
|
|
if (d->count <= 0) {
|
|
//
|
|
// fill with silence, and do not shut down the DAC.
|
|
// Continue to play silence until the _release.
|
|
//
|
|
CS_DBGOUT(CS_WAVE_WRITE, 6, printk(KERN_INFO
|
|
"cs4297a: cs4297a_update_ptr(): memset %d at 0x%.8x for %d size \n",
|
|
(unsigned)(s->prop_dac.fmt &
|
|
(AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0,
|
|
(unsigned)d->dma_buf,
|
|
d->ringsz));
|
|
memset(d->dma_buf, 0, d->ringsz * FRAME_BYTES);
|
|
if (d->count < 0) {
|
|
d->underrun = 1;
|
|
s->stats.tx_underrun++;
|
|
d->count = 0;
|
|
CS_DBGOUT(CS_ERROR, 9, printk(KERN_INFO
|
|
"cs4297a: cs4297a_update_ptr(): underrun\n"));
|
|
}
|
|
} else if (d->count <=
|
|
(signed) d->fragsize
|
|
&& !d->endcleared) {
|
|
/* XXXKW what is this for? */
|
|
clear_advance(d->dma_buf,
|
|
d->sbufsz,
|
|
d->swptr,
|
|
d->fragsize,
|
|
0);
|
|
d->endcleared = 1;
|
|
}
|
|
if ( (d->count <= (signed) d->sbufsz/2) || intflag)
|
|
{
|
|
CS_DBGOUT(CS_WAVE_WRITE, 4,
|
|
printk(KERN_INFO
|
|
"cs4297a: update count -> %d\n", d->count));
|
|
wake_up(&d->wait);
|
|
}
|
|
}
|
|
CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO
|
|
"cs4297a: cs4297a_update_ptr(): s=0x%.8x hwptr=%d total_bytes=%d count=%d \n",
|
|
(unsigned) s, d->hwptr,
|
|
d->total_bytes, d->count));
|
|
}
|
|
}
|
|
|
|
static int mixer_ioctl(struct cs4297a_state *s, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
// Index to mixer_src[] is value of AC97 Input Mux Select Reg.
|
|
// Value of array member is recording source Device ID Mask.
|
|
static const unsigned int mixer_src[8] = {
|
|
SOUND_MASK_MIC, SOUND_MASK_CD, 0, SOUND_MASK_LINE1,
|
|
SOUND_MASK_LINE, SOUND_MASK_VOLUME, 0, 0
|
|
};
|
|
|
|
// Index of mixtable1[] member is Device ID
|
|
// and must be <= SOUND_MIXER_NRDEVICES.
|
|
// Value of array member is index into s->mix.vol[]
|
|
static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = {
|
|
[SOUND_MIXER_PCM] = 1, // voice
|
|
[SOUND_MIXER_LINE1] = 2, // AUX
|
|
[SOUND_MIXER_CD] = 3, // CD
|
|
[SOUND_MIXER_LINE] = 4, // Line
|
|
[SOUND_MIXER_SYNTH] = 5, // FM
|
|
[SOUND_MIXER_MIC] = 6, // Mic
|
|
[SOUND_MIXER_SPEAKER] = 7, // Speaker
|
|
[SOUND_MIXER_RECLEV] = 8, // Recording level
|
|
[SOUND_MIXER_VOLUME] = 9 // Master Volume
|
|
};
|
|
|
|
static const unsigned mixreg[] = {
|
|
AC97_PCMOUT_VOL,
|
|
AC97_AUX_VOL,
|
|
AC97_CD_VOL,
|
|
AC97_LINEIN_VOL
|
|
};
|
|
unsigned char l, r, rl, rr, vidx;
|
|
unsigned char attentbl[11] =
|
|
{ 63, 42, 26, 17, 14, 11, 8, 6, 4, 2, 0 };
|
|
unsigned temp1;
|
|
int i, val;
|
|
|
|
VALIDATE_STATE(s);
|
|
CS_DBGOUT(CS_FUNCTION, 4, printk(KERN_INFO
|
|
"cs4297a: mixer_ioctl(): s=0x%.8x cmd=0x%.8x\n",
|
|
(unsigned) s, cmd));
|
|
#if CSDEBUG
|
|
cs_printioctl(cmd);
|
|
#endif
|
|
#if CSDEBUG_INTERFACE
|
|
|
|
if ((cmd == SOUND_MIXER_CS_GETDBGMASK) ||
|
|
(cmd == SOUND_MIXER_CS_SETDBGMASK) ||
|
|
(cmd == SOUND_MIXER_CS_GETDBGLEVEL) ||
|
|
(cmd == SOUND_MIXER_CS_SETDBGLEVEL))
|
|
{
|
|
switch (cmd) {
|
|
|
|
case SOUND_MIXER_CS_GETDBGMASK:
|
|
return put_user(cs_debugmask,
|
|
(unsigned long *) arg);
|
|
|
|
case SOUND_MIXER_CS_GETDBGLEVEL:
|
|
return put_user(cs_debuglevel,
|
|
(unsigned long *) arg);
|
|
|
|
case SOUND_MIXER_CS_SETDBGMASK:
|
|
if (get_user(val, (unsigned long *) arg))
|
|
return -EFAULT;
|
|
cs_debugmask = val;
|
|
return 0;
|
|
|
|
case SOUND_MIXER_CS_SETDBGLEVEL:
|
|
if (get_user(val, (unsigned long *) arg))
|
|
return -EFAULT;
|
|
cs_debuglevel = val;
|
|
return 0;
|
|
default:
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO
|
|
"cs4297a: mixer_ioctl(): ERROR unknown debug cmd\n"));
|
|
return 0;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (cmd == SOUND_MIXER_PRIVATE1) {
|
|
return -EINVAL;
|
|
}
|
|
if (cmd == SOUND_MIXER_PRIVATE2) {
|
|
// enable/disable/query spatializer
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
if (val != -1) {
|
|
temp1 = (val & 0x3f) >> 2;
|
|
cs4297a_write_ac97(s, AC97_3D_CONTROL, temp1);
|
|
cs4297a_read_ac97(s, AC97_GENERAL_PURPOSE,
|
|
&temp1);
|
|
cs4297a_write_ac97(s, AC97_GENERAL_PURPOSE,
|
|
temp1 | 0x2000);
|
|
}
|
|
cs4297a_read_ac97(s, AC97_3D_CONTROL, &temp1);
|
|
return put_user((temp1 << 2) | 3, (int *) arg);
|
|
}
|
|
if (cmd == SOUND_MIXER_INFO) {
|
|
mixer_info info;
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.id, "CS4297a", sizeof(info.id));
|
|
strlcpy(info.name, "Crystal CS4297a", sizeof(info.name));
|
|
info.modify_counter = s->mix.modcnt;
|
|
if (copy_to_user((void *) arg, &info, sizeof(info)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
if (cmd == SOUND_OLD_MIXER_INFO) {
|
|
_old_mixer_info info;
|
|
memset(&info, 0, sizeof(info));
|
|
strlcpy(info.id, "CS4297a", sizeof(info.id));
|
|
strlcpy(info.name, "Crystal CS4297a", sizeof(info.name));
|
|
if (copy_to_user((void *) arg, &info, sizeof(info)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
if (cmd == OSS_GETVERSION)
|
|
return put_user(SOUND_VERSION, (int *) arg);
|
|
|
|
if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
|
|
return -EINVAL;
|
|
|
|
// If ioctl has only the SIOC_READ bit(bit 31)
|
|
// on, process the only-read commands.
|
|
if (_SIOC_DIR(cmd) == _SIOC_READ) {
|
|
switch (_IOC_NR(cmd)) {
|
|
case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source
|
|
cs4297a_read_ac97(s, AC97_RECORD_SELECT,
|
|
&temp1);
|
|
return put_user(mixer_src[temp1 & 7], (int *) arg);
|
|
|
|
case SOUND_MIXER_DEVMASK: // Arg contains a bit for each supported device
|
|
return put_user(SOUND_MASK_PCM | SOUND_MASK_LINE |
|
|
SOUND_MASK_VOLUME | SOUND_MASK_RECLEV,
|
|
(int *) arg);
|
|
|
|
case SOUND_MIXER_RECMASK: // Arg contains a bit for each supported recording source
|
|
return put_user(SOUND_MASK_LINE | SOUND_MASK_VOLUME,
|
|
(int *) arg);
|
|
|
|
case SOUND_MIXER_STEREODEVS: // Mixer channels supporting stereo
|
|
return put_user(SOUND_MASK_PCM | SOUND_MASK_LINE |
|
|
SOUND_MASK_VOLUME | SOUND_MASK_RECLEV,
|
|
(int *) arg);
|
|
|
|
case SOUND_MIXER_CAPS:
|
|
return put_user(SOUND_CAP_EXCL_INPUT, (int *) arg);
|
|
|
|
default:
|
|
i = _IOC_NR(cmd);
|
|
if (i >= SOUND_MIXER_NRDEVICES
|
|
|| !(vidx = mixtable1[i]))
|
|
return -EINVAL;
|
|
return put_user(s->mix.vol[vidx - 1], (int *) arg);
|
|
}
|
|
}
|
|
// If ioctl doesn't have both the SIOC_READ and
|
|
// the SIOC_WRITE bit set, return invalid.
|
|
if (_SIOC_DIR(cmd) != (_SIOC_READ | _SIOC_WRITE))
|
|
return -EINVAL;
|
|
|
|
// Increment the count of volume writes.
|
|
s->mix.modcnt++;
|
|
|
|
// Isolate the command; it must be a write.
|
|
switch (_IOC_NR(cmd)) {
|
|
|
|
case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
i = hweight32(val); // i = # bits on in val.
|
|
if (i != 1) // One & only 1 bit must be on.
|
|
return 0;
|
|
for (i = 0; i < sizeof(mixer_src) / sizeof(int); i++) {
|
|
if (val == mixer_src[i]) {
|
|
temp1 = (i << 8) | i;
|
|
cs4297a_write_ac97(s,
|
|
AC97_RECORD_SELECT,
|
|
temp1);
|
|
return 0;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
case SOUND_MIXER_VOLUME:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100; // Max soundcard.h vol is 100.
|
|
if (l < 6) {
|
|
rl = 63;
|
|
l = 0;
|
|
} else
|
|
rl = attentbl[(10 * l) / 100]; // Convert 0-100 vol to 63-0 atten.
|
|
|
|
r = (val >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100; // Max right volume is 100, too
|
|
if (r < 6) {
|
|
rr = 63;
|
|
r = 0;
|
|
} else
|
|
rr = attentbl[(10 * r) / 100]; // Convert volume to attenuation.
|
|
|
|
if ((rl > 60) && (rr > 60)) // If both l & r are 'low',
|
|
temp1 = 0x8000; // turn on the mute bit.
|
|
else
|
|
temp1 = 0;
|
|
|
|
temp1 |= (rl << 8) | rr;
|
|
|
|
cs4297a_write_ac97(s, AC97_MASTER_VOL_STEREO, temp1);
|
|
cs4297a_write_ac97(s, AC97_PHONE_VOL, temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[8] = ((unsigned int) r << 8) | l;
|
|
#else
|
|
s->mix.vol[8] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[8], (int *) arg);
|
|
|
|
case SOUND_MIXER_SPEAKER:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
if (l < 3) {
|
|
rl = 0;
|
|
l = 0;
|
|
} else {
|
|
rl = (l * 2 - 5) / 13; // Convert 0-100 range to 0-15.
|
|
l = (rl * 13 + 5) / 2;
|
|
}
|
|
|
|
if (rl < 3) {
|
|
temp1 = 0x8000;
|
|
rl = 0;
|
|
} else
|
|
temp1 = 0;
|
|
rl = 15 - rl; // Convert volume to attenuation.
|
|
temp1 |= rl << 1;
|
|
cs4297a_write_ac97(s, AC97_PCBEEP_VOL, temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[6] = l << 8;
|
|
#else
|
|
s->mix.vol[6] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[6], (int *) arg);
|
|
|
|
case SOUND_MIXER_RECLEV:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
r = (val >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100;
|
|
rl = (l * 2 - 5) / 13; // Convert 0-100 scale to 0-15.
|
|
rr = (r * 2 - 5) / 13;
|
|
if (rl < 3 && rr < 3)
|
|
temp1 = 0x8000;
|
|
else
|
|
temp1 = 0;
|
|
|
|
temp1 = temp1 | (rl << 8) | rr;
|
|
cs4297a_write_ac97(s, AC97_RECORD_GAIN, temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[7] = ((unsigned int) r << 8) | l;
|
|
#else
|
|
s->mix.vol[7] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[7], (int *) arg);
|
|
|
|
case SOUND_MIXER_MIC:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
if (l < 1) {
|
|
l = 0;
|
|
rl = 0;
|
|
} else {
|
|
rl = ((unsigned) l * 5 - 4) / 16; // Convert 0-100 range to 0-31.
|
|
l = (rl * 16 + 4) / 5;
|
|
}
|
|
cs4297a_read_ac97(s, AC97_MIC_VOL, &temp1);
|
|
temp1 &= 0x40; // Isolate 20db gain bit.
|
|
if (rl < 3) {
|
|
temp1 |= 0x8000;
|
|
rl = 0;
|
|
}
|
|
rl = 31 - rl; // Convert volume to attenuation.
|
|
temp1 |= rl;
|
|
cs4297a_write_ac97(s, AC97_MIC_VOL, temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[5] = val << 8;
|
|
#else
|
|
s->mix.vol[5] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[5], (int *) arg);
|
|
|
|
|
|
case SOUND_MIXER_SYNTH:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
r = (val >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100;
|
|
rl = (l * 2 - 11) / 3; // Convert 0-100 range to 0-63.
|
|
rr = (r * 2 - 11) / 3;
|
|
if (rl < 3) // If l is low, turn on
|
|
temp1 = 0x0080; // the mute bit.
|
|
else
|
|
temp1 = 0;
|
|
|
|
rl = 63 - rl; // Convert vol to attenuation.
|
|
// writel(temp1 | rl, s->pBA0 + FMLVC);
|
|
if (rr < 3) // If rr is low, turn on
|
|
temp1 = 0x0080; // the mute bit.
|
|
else
|
|
temp1 = 0;
|
|
rr = 63 - rr; // Convert vol to attenuation.
|
|
// writel(temp1 | rr, s->pBA0 + FMRVC);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[4] = (r << 8) | l;
|
|
#else
|
|
s->mix.vol[4] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[4], (int *) arg);
|
|
|
|
|
|
default:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4297a: mixer_ioctl(): default\n"));
|
|
|
|
i = _IOC_NR(cmd);
|
|
if (i >= SOUND_MIXER_NRDEVICES || !(vidx = mixtable1[i]))
|
|
return -EINVAL;
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
l = val & 0xff;
|
|
if (l > 100)
|
|
l = 100;
|
|
if (l < 1) {
|
|
l = 0;
|
|
rl = 31;
|
|
} else
|
|
rl = (attentbl[(l * 10) / 100]) >> 1;
|
|
|
|
r = (val >> 8) & 0xff;
|
|
if (r > 100)
|
|
r = 100;
|
|
if (r < 1) {
|
|
r = 0;
|
|
rr = 31;
|
|
} else
|
|
rr = (attentbl[(r * 10) / 100]) >> 1;
|
|
if ((rl > 30) && (rr > 30))
|
|
temp1 = 0x8000;
|
|
else
|
|
temp1 = 0;
|
|
temp1 = temp1 | (rl << 8) | rr;
|
|
cs4297a_write_ac97(s, mixreg[vidx - 1], temp1);
|
|
|
|
#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS
|
|
s->mix.vol[vidx - 1] = ((unsigned int) r << 8) | l;
|
|
#else
|
|
s->mix.vol[vidx - 1] = val;
|
|
#endif
|
|
return put_user(s->mix.vol[vidx - 1], (int *) arg);
|
|
}
|
|
}
|
|
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
static int cs4297a_open_mixdev(struct inode *inode, struct file *file)
|
|
{
|
|
int minor = iminor(inode);
|
|
struct cs4297a_state *s=NULL;
|
|
struct list_head *entry;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
|
|
printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()+\n"));
|
|
|
|
list_for_each(entry, &cs4297a_devs)
|
|
{
|
|
s = list_entry(entry, struct cs4297a_state, list);
|
|
if(s->dev_mixer == minor)
|
|
break;
|
|
}
|
|
if (!s)
|
|
{
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2,
|
|
printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- -ENODEV\n"));
|
|
return -ENODEV;
|
|
}
|
|
VALIDATE_STATE(s);
|
|
file->private_data = s;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
|
|
printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- 0\n"));
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
|
|
static int cs4297a_release_mixdev(struct inode *inode, struct file *file)
|
|
{
|
|
struct cs4297a_state *s =
|
|
(struct cs4297a_state *) file->private_data;
|
|
|
|
VALIDATE_STATE(s);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int cs4297a_ioctl_mixdev(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return mixer_ioctl((struct cs4297a_state *) file->private_data, cmd,
|
|
arg);
|
|
}
|
|
|
|
|
|
// ******************************************************************************************
|
|
// Mixer file operations struct.
|
|
// ******************************************************************************************
|
|
static const struct file_operations cs4297a_mixer_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.ioctl = cs4297a_ioctl_mixdev,
|
|
.open = cs4297a_open_mixdev,
|
|
.release = cs4297a_release_mixdev,
|
|
};
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
|
|
static int drain_adc(struct cs4297a_state *s, int nonblock)
|
|
{
|
|
/* This routine serves no purpose currently - any samples
|
|
sitting in the receive queue will just be processed by the
|
|
background consumer. This would be different if DMA
|
|
actually stopped when there were no clients. */
|
|
return 0;
|
|
}
|
|
|
|
static int drain_dac(struct cs4297a_state *s, int nonblock)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
unsigned long flags;
|
|
unsigned hwptr;
|
|
unsigned tmo;
|
|
int count;
|
|
|
|
if (s->dma_dac.mapped)
|
|
return 0;
|
|
if (nonblock)
|
|
return -EBUSY;
|
|
add_wait_queue(&s->dma_dac.wait, &wait);
|
|
while ((count = __raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) ||
|
|
(s->dma_dac.count > 0)) {
|
|
if (!signal_pending(current)) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
/* XXXKW is this calculation working? */
|
|
tmo = ((count * FRAME_TX_US) * HZ) / 1000000;
|
|
schedule_timeout(tmo + 1);
|
|
} else {
|
|
/* XXXKW do I care if there is a signal pending? */
|
|
}
|
|
}
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
/* Reset the bookkeeping */
|
|
hwptr = (int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
|
|
s->dma_dac.descrtab_phys) / sizeof(serdma_descr_t));
|
|
s->dma_dac.hwptr = s->dma_dac.swptr = hwptr;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
remove_wait_queue(&s->dma_dac.wait, &wait);
|
|
current->state = TASK_RUNNING;
|
|
return 0;
|
|
}
|
|
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
static ssize_t cs4297a_read(struct file *file, char *buffer, size_t count,
|
|
loff_t * ppos)
|
|
{
|
|
struct cs4297a_state *s =
|
|
(struct cs4297a_state *) file->private_data;
|
|
ssize_t ret;
|
|
unsigned long flags;
|
|
int cnt, count_fr, cnt_by;
|
|
unsigned copied = 0;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2,
|
|
printk(KERN_INFO "cs4297a: cs4297a_read()+ %d \n", count));
|
|
|
|
VALIDATE_STATE(s);
|
|
if (s->dma_adc.mapped)
|
|
return -ENXIO;
|
|
if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s)))
|
|
return ret;
|
|
if (!access_ok(VERIFY_WRITE, buffer, count))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
//
|
|
// "count" is the amount of bytes to read (from app), is decremented each loop
|
|
// by the amount of bytes that have been returned to the user buffer.
|
|
// "cnt" is the running total of each read from the buffer (changes each loop)
|
|
// "buffer" points to the app's buffer
|
|
// "ret" keeps a running total of the amount of bytes that have been copied
|
|
// to the user buffer.
|
|
// "copied" is the total bytes copied into the user buffer for each loop.
|
|
//
|
|
while (count > 0) {
|
|
CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
|
|
"_read() count>0 count=%d .count=%d .swptr=%d .hwptr=%d \n",
|
|
count, s->dma_adc.count,
|
|
s->dma_adc.swptr, s->dma_adc.hwptr));
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
|
|
/* cnt will be the number of available samples (16-bit
|
|
stereo); it starts out as the maxmimum consequetive
|
|
samples */
|
|
cnt = (s->dma_adc.sb_end - s->dma_adc.sb_swptr) / 2;
|
|
count_fr = s->dma_adc.count / FRAME_SAMPLE_BYTES;
|
|
|
|
// dma_adc.count is the current total bytes that have not been read.
|
|
// if the amount of unread bytes from the current sw pointer to the
|
|
// end of the buffer is greater than the current total bytes that
|
|
// have not been read, then set the "cnt" (unread bytes) to the
|
|
// amount of unread bytes.
|
|
|
|
if (count_fr < cnt)
|
|
cnt = count_fr;
|
|
cnt_by = cnt * FRAME_SAMPLE_BYTES;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
//
|
|
// if we are converting from 8/16 then we need to copy
|
|
// twice the number of 16 bit bytes then 8 bit bytes.
|
|
//
|
|
if (s->conversion) {
|
|
if (cnt_by > (count * 2)) {
|
|
cnt = (count * 2) / FRAME_SAMPLE_BYTES;
|
|
cnt_by = count * 2;
|
|
}
|
|
} else {
|
|
if (cnt_by > count) {
|
|
cnt = count / FRAME_SAMPLE_BYTES;
|
|
cnt_by = count;
|
|
}
|
|
}
|
|
//
|
|
// "cnt" NOW is the smaller of the amount that will be read,
|
|
// and the amount that is requested in this read (or partial).
|
|
// if there are no bytes in the buffer to read, then start the
|
|
// ADC and wait for the interrupt handler to wake us up.
|
|
//
|
|
if (cnt <= 0) {
|
|
|
|
// start up the dma engine and then continue back to the top of
|
|
// the loop when wake up occurs.
|
|
start_adc(s);
|
|
if (file->f_flags & O_NONBLOCK)
|
|
return ret ? ret : -EAGAIN;
|
|
interruptible_sleep_on(&s->dma_adc.wait);
|
|
if (signal_pending(current))
|
|
return ret ? ret : -ERESTARTSYS;
|
|
continue;
|
|
}
|
|
// there are bytes in the buffer to read.
|
|
// copy from the hw buffer over to the user buffer.
|
|
// user buffer is designated by "buffer"
|
|
// virtual address to copy from is dma_buf+swptr
|
|
// the "cnt" is the number of bytes to read.
|
|
|
|
CS_DBGOUT(CS_WAVE_READ, 2, printk(KERN_INFO
|
|
"_read() copy_to cnt=%d count=%d ", cnt_by, count));
|
|
CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO
|
|
" .sbufsz=%d .count=%d buffer=0x%.8x ret=%d\n",
|
|
s->dma_adc.sbufsz, s->dma_adc.count,
|
|
(unsigned) buffer, ret));
|
|
|
|
if (copy_to_user (buffer, ((void *)s->dma_adc.sb_swptr), cnt_by))
|
|
return ret ? ret : -EFAULT;
|
|
copied = cnt_by;
|
|
|
|
/* Return the descriptors */
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
CS_DBGOUT(CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4297a: upd_rcv sw->hw %x/%x\n", s->dma_adc.swptr, s->dma_adc.hwptr));
|
|
s->dma_adc.count -= cnt_by;
|
|
s->dma_adc.sb_swptr += cnt * 2;
|
|
if (s->dma_adc.sb_swptr == s->dma_adc.sb_end)
|
|
s->dma_adc.sb_swptr = s->dma_adc.sample_buf;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
count -= copied;
|
|
buffer += copied;
|
|
ret += copied;
|
|
start_adc(s);
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2,
|
|
printk(KERN_INFO "cs4297a: cs4297a_read()- %d\n", ret));
|
|
return ret;
|
|
}
|
|
|
|
|
|
static ssize_t cs4297a_write(struct file *file, const char *buffer,
|
|
size_t count, loff_t * ppos)
|
|
{
|
|
struct cs4297a_state *s =
|
|
(struct cs4297a_state *) file->private_data;
|
|
ssize_t ret;
|
|
unsigned long flags;
|
|
unsigned swptr, hwptr;
|
|
int cnt;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2,
|
|
printk(KERN_INFO "cs4297a: cs4297a_write()+ count=%d\n",
|
|
count));
|
|
VALIDATE_STATE(s);
|
|
|
|
if (s->dma_dac.mapped)
|
|
return -ENXIO;
|
|
if (!s->dma_dac.ready && (ret = prog_dmabuf_dac(s)))
|
|
return ret;
|
|
if (!access_ok(VERIFY_READ, buffer, count))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
while (count > 0) {
|
|
serdma_t *d = &s->dma_dac;
|
|
int copy_cnt;
|
|
u32 *s_tmpl;
|
|
u32 *t_tmpl;
|
|
u32 left, right;
|
|
int swap = (s->prop_dac.fmt == AFMT_S16_LE) || (s->prop_dac.fmt == AFMT_U16_LE);
|
|
|
|
/* XXXXXX this is broken for BLOAT_FACTOR */
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
if (d->count < 0) {
|
|
d->count = 0;
|
|
d->swptr = d->hwptr;
|
|
}
|
|
if (d->underrun) {
|
|
d->underrun = 0;
|
|
hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
|
|
d->descrtab_phys) / sizeof(serdma_descr_t));
|
|
d->swptr = d->hwptr = hwptr;
|
|
}
|
|
swptr = d->swptr;
|
|
cnt = d->sbufsz - (swptr * FRAME_SAMPLE_BYTES);
|
|
/* Will this write fill up the buffer? */
|
|
if (d->count + cnt > d->sbufsz)
|
|
cnt = d->sbufsz - d->count;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (cnt > count)
|
|
cnt = count;
|
|
if (cnt <= 0) {
|
|
start_dac(s);
|
|
if (file->f_flags & O_NONBLOCK)
|
|
return ret ? ret : -EAGAIN;
|
|
interruptible_sleep_on(&d->wait);
|
|
if (signal_pending(current))
|
|
return ret ? ret : -ERESTARTSYS;
|
|
continue;
|
|
}
|
|
if (copy_from_user(d->sample_buf, buffer, cnt))
|
|
return ret ? ret : -EFAULT;
|
|
|
|
copy_cnt = cnt;
|
|
s_tmpl = (u32 *)d->sample_buf;
|
|
t_tmpl = (u32 *)(d->dma_buf + (swptr * 4));
|
|
|
|
/* XXXKW assuming 16-bit stereo! */
|
|
do {
|
|
u32 tmp;
|
|
|
|
t_tmpl[0] = cpu_to_be32(0x98000000);
|
|
|
|
tmp = be32_to_cpu(s_tmpl[0]);
|
|
left = tmp & 0xffff;
|
|
right = tmp >> 16;
|
|
if (swap) {
|
|
left = swab16(left);
|
|
right = swab16(right);
|
|
}
|
|
t_tmpl[1] = cpu_to_be32(left >> 8);
|
|
t_tmpl[2] = cpu_to_be32(((left & 0xff) << 24) |
|
|
(right << 4));
|
|
|
|
s_tmpl++;
|
|
t_tmpl += 8;
|
|
copy_cnt -= 4;
|
|
} while (copy_cnt);
|
|
|
|
/* Mux in any pending read/write accesses */
|
|
if (s->reg_request) {
|
|
*(u64 *)(d->dma_buf + (swptr * 4)) |=
|
|
cpu_to_be64(s->reg_request);
|
|
s->reg_request = 0;
|
|
wake_up(&s->dma_dac.reg_wait);
|
|
}
|
|
|
|
CS_DBGOUT(CS_WAVE_WRITE, 4,
|
|
printk(KERN_INFO
|
|
"cs4297a: copy in %d to swptr %x\n", cnt, swptr));
|
|
|
|
swptr = (swptr + (cnt/FRAME_SAMPLE_BYTES)) % d->ringsz;
|
|
__raw_writeq(cnt/FRAME_SAMPLE_BYTES, SS_CSR(R_SER_DMA_DSCR_COUNT_TX));
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
d->swptr = swptr;
|
|
d->count += cnt;
|
|
d->endcleared = 0;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
count -= cnt;
|
|
buffer += cnt;
|
|
ret += cnt;
|
|
start_dac(s);
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2,
|
|
printk(KERN_INFO "cs4297a: cs4297a_write()- %d\n", ret));
|
|
return ret;
|
|
}
|
|
|
|
|
|
static unsigned int cs4297a_poll(struct file *file,
|
|
struct poll_table_struct *wait)
|
|
{
|
|
struct cs4297a_state *s =
|
|
(struct cs4297a_state *) file->private_data;
|
|
unsigned long flags;
|
|
unsigned int mask = 0;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
|
|
printk(KERN_INFO "cs4297a: cs4297a_poll()+\n"));
|
|
VALIDATE_STATE(s);
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
|
|
printk(KERN_INFO
|
|
"cs4297a: cs4297a_poll() wait on FMODE_WRITE\n"));
|
|
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
|
|
return 0;
|
|
poll_wait(file, &s->dma_dac.wait, wait);
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
|
|
printk(KERN_INFO
|
|
"cs4297a: cs4297a_poll() wait on FMODE_READ\n"));
|
|
if(!s->dma_dac.ready && prog_dmabuf_adc(s))
|
|
return 0;
|
|
poll_wait(file, &s->dma_adc.wait, wait);
|
|
}
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4297a_update_ptr(s,CS_FALSE);
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if (s->dma_dac.mapped) {
|
|
if (s->dma_dac.count >=
|
|
(signed) s->dma_dac.fragsize) {
|
|
if (s->dma_dac.wakeup)
|
|
mask |= POLLOUT | POLLWRNORM;
|
|
else
|
|
mask = 0;
|
|
s->dma_dac.wakeup = 0;
|
|
}
|
|
} else {
|
|
if ((signed) (s->dma_dac.sbufsz/2) >= s->dma_dac.count)
|
|
mask |= POLLOUT | POLLWRNORM;
|
|
}
|
|
} else if (file->f_mode & FMODE_READ) {
|
|
if (s->dma_adc.mapped) {
|
|
if (s->dma_adc.count >= (signed) s->dma_adc.fragsize)
|
|
mask |= POLLIN | POLLRDNORM;
|
|
} else {
|
|
if (s->dma_adc.count > 0)
|
|
mask |= POLLIN | POLLRDNORM;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4,
|
|
printk(KERN_INFO "cs4297a: cs4297a_poll()- 0x%.8x\n",
|
|
mask));
|
|
return mask;
|
|
}
|
|
|
|
|
|
static int cs4297a_mmap(struct file *file, struct vm_area_struct *vma)
|
|
{
|
|
/* XXXKW currently no mmap support */
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int cs4297a_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct cs4297a_state *s =
|
|
(struct cs4297a_state *) file->private_data;
|
|
unsigned long flags;
|
|
audio_buf_info abinfo;
|
|
count_info cinfo;
|
|
int val, mapped, ret;
|
|
|
|
CS_DBGOUT(CS_FUNCTION|CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): file=0x%.8x cmd=0x%.8x\n",
|
|
(unsigned) file, cmd));
|
|
#if CSDEBUG
|
|
cs_printioctl(cmd);
|
|
#endif
|
|
VALIDATE_STATE(s);
|
|
mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac.mapped) ||
|
|
((file->f_mode & FMODE_READ) && s->dma_adc.mapped);
|
|
switch (cmd) {
|
|
case OSS_GETVERSION:
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): SOUND_VERSION=0x%.8x\n",
|
|
SOUND_VERSION));
|
|
return put_user(SOUND_VERSION, (int *) arg);
|
|
|
|
case SNDCTL_DSP_SYNC:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_SYNC\n"));
|
|
if (file->f_mode & FMODE_WRITE)
|
|
return drain_dac(s,
|
|
0 /*file->f_flags & O_NONBLOCK */
|
|
);
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SETDUPLEX:
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETCAPS:
|
|
return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME |
|
|
DSP_CAP_TRIGGER | DSP_CAP_MMAP,
|
|
(int *) arg);
|
|
|
|
case SNDCTL_DSP_RESET:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_RESET\n"));
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
stop_dac(s);
|
|
synchronize_irq(s->irq);
|
|
s->dma_dac.count = s->dma_dac.total_bytes =
|
|
s->dma_dac.blocks = s->dma_dac.wakeup = 0;
|
|
s->dma_dac.swptr = s->dma_dac.hwptr =
|
|
(int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) -
|
|
s->dma_dac.descrtab_phys) / sizeof(serdma_descr_t));
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(s);
|
|
synchronize_irq(s->irq);
|
|
s->dma_adc.count = s->dma_adc.total_bytes =
|
|
s->dma_adc.blocks = s->dma_dac.wakeup = 0;
|
|
s->dma_adc.swptr = s->dma_adc.hwptr =
|
|
(int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
|
|
s->dma_adc.descrtab_phys) / sizeof(serdma_descr_t));
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SPEED:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_SPEED val=%d -> 48000\n", val));
|
|
val = 48000;
|
|
return put_user(val, (int *) arg);
|
|
|
|
case SNDCTL_DSP_STEREO:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_STEREO val=%d\n", val));
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(s);
|
|
s->dma_adc.ready = 0;
|
|
s->prop_adc.channels = val ? 2 : 1;
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
stop_dac(s);
|
|
s->dma_dac.ready = 0;
|
|
s->prop_dac.channels = val ? 2 : 1;
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_CHANNELS:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_CHANNELS val=%d\n",
|
|
val));
|
|
if (val != 0) {
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(s);
|
|
s->dma_adc.ready = 0;
|
|
if (val >= 2)
|
|
s->prop_adc.channels = 2;
|
|
else
|
|
s->prop_adc.channels = 1;
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
stop_dac(s);
|
|
s->dma_dac.ready = 0;
|
|
if (val >= 2)
|
|
s->prop_dac.channels = 2;
|
|
else
|
|
s->prop_dac.channels = 1;
|
|
}
|
|
}
|
|
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = s->prop_dac.channels;
|
|
else if (file->f_mode & FMODE_READ)
|
|
val = s->prop_adc.channels;
|
|
|
|
return put_user(val, (int *) arg);
|
|
|
|
case SNDCTL_DSP_GETFMTS: // Returns a mask
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_GETFMT val=0x%.8x\n",
|
|
AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
|
|
AFMT_U8));
|
|
return put_user(AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
|
|
AFMT_U8, (int *) arg);
|
|
|
|
case SNDCTL_DSP_SETFMT:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_SETFMT val=0x%.8x\n",
|
|
val));
|
|
if (val != AFMT_QUERY) {
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(s);
|
|
s->dma_adc.ready = 0;
|
|
if (val != AFMT_S16_LE
|
|
&& val != AFMT_U16_LE && val != AFMT_S8
|
|
&& val != AFMT_U8)
|
|
val = AFMT_U8;
|
|
s->prop_adc.fmt = val;
|
|
s->prop_adc.fmt_original = s->prop_adc.fmt;
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
stop_dac(s);
|
|
s->dma_dac.ready = 0;
|
|
if (val != AFMT_S16_LE
|
|
&& val != AFMT_U16_LE && val != AFMT_S8
|
|
&& val != AFMT_U8)
|
|
val = AFMT_U8;
|
|
s->prop_dac.fmt = val;
|
|
s->prop_dac.fmt_original = s->prop_dac.fmt;
|
|
}
|
|
} else {
|
|
if (file->f_mode & FMODE_WRITE)
|
|
val = s->prop_dac.fmt_original;
|
|
else if (file->f_mode & FMODE_READ)
|
|
val = s->prop_adc.fmt_original;
|
|
}
|
|
CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_SETFMT return val=0x%.8x\n",
|
|
val));
|
|
return put_user(val, (int *) arg);
|
|
|
|
case SNDCTL_DSP_POST:
|
|
CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): DSP_POST\n"));
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETTRIGGER:
|
|
val = 0;
|
|
if (file->f_mode & s->ena & FMODE_READ)
|
|
val |= PCM_ENABLE_INPUT;
|
|
if (file->f_mode & s->ena & FMODE_WRITE)
|
|
val |= PCM_ENABLE_OUTPUT;
|
|
return put_user(val, (int *) arg);
|
|
|
|
case SNDCTL_DSP_SETTRIGGER:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
if (file->f_mode & FMODE_READ) {
|
|
if (val & PCM_ENABLE_INPUT) {
|
|
if (!s->dma_adc.ready
|
|
&& (ret = prog_dmabuf_adc(s)))
|
|
return ret;
|
|
start_adc(s);
|
|
} else
|
|
stop_adc(s);
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if (val & PCM_ENABLE_OUTPUT) {
|
|
if (!s->dma_dac.ready
|
|
&& (ret = prog_dmabuf_dac(s)))
|
|
return ret;
|
|
start_dac(s);
|
|
} else
|
|
stop_dac(s);
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETOSPACE:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if (!s->dma_dac.ready && (val = prog_dmabuf_dac(s)))
|
|
return val;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4297a_update_ptr(s,CS_FALSE);
|
|
abinfo.fragsize = s->dma_dac.fragsize;
|
|
if (s->dma_dac.mapped)
|
|
abinfo.bytes = s->dma_dac.sbufsz;
|
|
else
|
|
abinfo.bytes =
|
|
s->dma_dac.sbufsz - s->dma_dac.count;
|
|
abinfo.fragstotal = s->dma_dac.numfrag;
|
|
abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
|
|
CS_DBGOUT(CS_FUNCTION | CS_PARMS, 4, printk(KERN_INFO
|
|
"cs4297a: cs4297a_ioctl(): GETOSPACE .fragsize=%d .bytes=%d .fragstotal=%d .fragments=%d\n",
|
|
abinfo.fragsize,abinfo.bytes,abinfo.fragstotal,
|
|
abinfo.fragments));
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return copy_to_user((void *) arg, &abinfo,
|
|
sizeof(abinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_GETISPACE:
|
|
if (!(file->f_mode & FMODE_READ))
|
|
return -EINVAL;
|
|
if (!s->dma_adc.ready && (val = prog_dmabuf_adc(s)))
|
|
return val;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4297a_update_ptr(s,CS_FALSE);
|
|
if (s->conversion) {
|
|
abinfo.fragsize = s->dma_adc.fragsize / 2;
|
|
abinfo.bytes = s->dma_adc.count / 2;
|
|
abinfo.fragstotal = s->dma_adc.numfrag;
|
|
abinfo.fragments =
|
|
abinfo.bytes >> (s->dma_adc.fragshift - 1);
|
|
} else {
|
|
abinfo.fragsize = s->dma_adc.fragsize;
|
|
abinfo.bytes = s->dma_adc.count;
|
|
abinfo.fragstotal = s->dma_adc.numfrag;
|
|
abinfo.fragments =
|
|
abinfo.bytes >> s->dma_adc.fragshift;
|
|
}
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return copy_to_user((void *) arg, &abinfo,
|
|
sizeof(abinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_NONBLOCK:
|
|
spin_lock(&file->f_lock);
|
|
file->f_flags |= O_NONBLOCK;
|
|
spin_unlock(&file->f_lock);
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETODELAY:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
|
|
return 0;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4297a_update_ptr(s,CS_FALSE);
|
|
val = s->dma_dac.count;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return put_user(val, (int *) arg);
|
|
|
|
case SNDCTL_DSP_GETIPTR:
|
|
if (!(file->f_mode & FMODE_READ))
|
|
return -EINVAL;
|
|
if(!s->dma_adc.ready && prog_dmabuf_adc(s))
|
|
return 0;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4297a_update_ptr(s,CS_FALSE);
|
|
cinfo.bytes = s->dma_adc.total_bytes;
|
|
if (s->dma_adc.mapped) {
|
|
cinfo.blocks =
|
|
(cinfo.bytes >> s->dma_adc.fragshift) -
|
|
s->dma_adc.blocks;
|
|
s->dma_adc.blocks =
|
|
cinfo.bytes >> s->dma_adc.fragshift;
|
|
} else {
|
|
if (s->conversion) {
|
|
cinfo.blocks =
|
|
s->dma_adc.count /
|
|
2 >> (s->dma_adc.fragshift - 1);
|
|
} else
|
|
cinfo.blocks =
|
|
s->dma_adc.count >> s->dma_adc.
|
|
fragshift;
|
|
}
|
|
if (s->conversion)
|
|
cinfo.ptr = s->dma_adc.hwptr / 2;
|
|
else
|
|
cinfo.ptr = s->dma_adc.hwptr;
|
|
if (s->dma_adc.mapped)
|
|
s->dma_adc.count &= s->dma_adc.fragsize - 1;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return copy_to_user((void *) arg, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_GETOPTR:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if(!s->dma_dac.ready && prog_dmabuf_dac(s))
|
|
return 0;
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
cs4297a_update_ptr(s,CS_FALSE);
|
|
cinfo.bytes = s->dma_dac.total_bytes;
|
|
if (s->dma_dac.mapped) {
|
|
cinfo.blocks =
|
|
(cinfo.bytes >> s->dma_dac.fragshift) -
|
|
s->dma_dac.blocks;
|
|
s->dma_dac.blocks =
|
|
cinfo.bytes >> s->dma_dac.fragshift;
|
|
} else {
|
|
cinfo.blocks =
|
|
s->dma_dac.count >> s->dma_dac.fragshift;
|
|
}
|
|
cinfo.ptr = s->dma_dac.hwptr;
|
|
if (s->dma_dac.mapped)
|
|
s->dma_dac.count &= s->dma_dac.fragsize - 1;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return copy_to_user((void *) arg, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_GETBLKSIZE:
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if ((val = prog_dmabuf_dac(s)))
|
|
return val;
|
|
return put_user(s->dma_dac.fragsize, (int *) arg);
|
|
}
|
|
if ((val = prog_dmabuf_adc(s)))
|
|
return val;
|
|
if (s->conversion)
|
|
return put_user(s->dma_adc.fragsize / 2,
|
|
(int *) arg);
|
|
else
|
|
return put_user(s->dma_adc.fragsize, (int *) arg);
|
|
|
|
case SNDCTL_DSP_SETFRAGMENT:
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
return 0; // Say OK, but do nothing.
|
|
|
|
case SNDCTL_DSP_SUBDIVIDE:
|
|
if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision)
|
|
|| (file->f_mode & FMODE_WRITE
|
|
&& s->dma_dac.subdivision)) return -EINVAL;
|
|
if (get_user(val, (int *) arg))
|
|
return -EFAULT;
|
|
if (val != 1 && val != 2 && val != 4)
|
|
return -EINVAL;
|
|
if (file->f_mode & FMODE_READ)
|
|
s->dma_adc.subdivision = val;
|
|
else if (file->f_mode & FMODE_WRITE)
|
|
s->dma_dac.subdivision = val;
|
|
return 0;
|
|
|
|
case SOUND_PCM_READ_RATE:
|
|
if (file->f_mode & FMODE_READ)
|
|
return put_user(s->prop_adc.rate, (int *) arg);
|
|
else if (file->f_mode & FMODE_WRITE)
|
|
return put_user(s->prop_dac.rate, (int *) arg);
|
|
|
|
case SOUND_PCM_READ_CHANNELS:
|
|
if (file->f_mode & FMODE_READ)
|
|
return put_user(s->prop_adc.channels, (int *) arg);
|
|
else if (file->f_mode & FMODE_WRITE)
|
|
return put_user(s->prop_dac.channels, (int *) arg);
|
|
|
|
case SOUND_PCM_READ_BITS:
|
|
if (file->f_mode & FMODE_READ)
|
|
return
|
|
put_user(
|
|
(s->prop_adc.
|
|
fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16,
|
|
(int *) arg);
|
|
else if (file->f_mode & FMODE_WRITE)
|
|
return
|
|
put_user(
|
|
(s->prop_dac.
|
|
fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16,
|
|
(int *) arg);
|
|
|
|
case SOUND_PCM_WRITE_FILTER:
|
|
case SNDCTL_DSP_SETSYNCRO:
|
|
case SOUND_PCM_READ_FILTER:
|
|
return -EINVAL;
|
|
}
|
|
return mixer_ioctl(s, cmd, arg);
|
|
}
|
|
|
|
|
|
static int cs4297a_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct cs4297a_state *s =
|
|
(struct cs4297a_state *) file->private_data;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_RELEASE, 2, printk(KERN_INFO
|
|
"cs4297a: cs4297a_release(): inode=0x%.8x file=0x%.8x f_mode=0x%x\n",
|
|
(unsigned) inode, (unsigned) file, file->f_mode));
|
|
VALIDATE_STATE(s);
|
|
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
drain_dac(s, file->f_flags & O_NONBLOCK);
|
|
mutex_lock(&s->open_sem_dac);
|
|
stop_dac(s);
|
|
dealloc_dmabuf(s, &s->dma_dac);
|
|
s->open_mode &= ~FMODE_WRITE;
|
|
mutex_unlock(&s->open_sem_dac);
|
|
wake_up(&s->open_wait_dac);
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
drain_adc(s, file->f_flags & O_NONBLOCK);
|
|
mutex_lock(&s->open_sem_adc);
|
|
stop_adc(s);
|
|
dealloc_dmabuf(s, &s->dma_adc);
|
|
s->open_mode &= ~FMODE_READ;
|
|
mutex_unlock(&s->open_sem_adc);
|
|
wake_up(&s->open_wait_adc);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int cs4297a_open(struct inode *inode, struct file *file)
|
|
{
|
|
int minor = iminor(inode);
|
|
struct cs4297a_state *s=NULL;
|
|
struct list_head *entry;
|
|
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
|
|
"cs4297a: cs4297a_open(): inode=0x%.8x file=0x%.8x f_mode=0x%x\n",
|
|
(unsigned) inode, (unsigned) file, file->f_mode));
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
|
|
"cs4297a: status = %08x\n", (int)__raw_readq(SS_CSR(R_SER_STATUS_DEBUG))));
|
|
|
|
list_for_each(entry, &cs4297a_devs)
|
|
{
|
|
s = list_entry(entry, struct cs4297a_state, list);
|
|
|
|
if (!((s->dev_audio ^ minor) & ~0xf))
|
|
break;
|
|
}
|
|
if (entry == &cs4297a_devs)
|
|
return -ENODEV;
|
|
if (!s) {
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO
|
|
"cs4297a: cs4297a_open(): Error - unable to find audio state struct\n"));
|
|
return -ENODEV;
|
|
}
|
|
VALIDATE_STATE(s);
|
|
file->private_data = s;
|
|
|
|
// wait for device to become free
|
|
if (!(file->f_mode & (FMODE_WRITE | FMODE_READ))) {
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2, printk(KERN_INFO
|
|
"cs4297a: cs4297a_open(): Error - must open READ and/or WRITE\n"));
|
|
return -ENODEV;
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX)) != 0) {
|
|
printk(KERN_ERR "cs4297a: TX pipe needs to drain\n");
|
|
while (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX)))
|
|
;
|
|
}
|
|
|
|
mutex_lock(&s->open_sem_dac);
|
|
while (s->open_mode & FMODE_WRITE) {
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
mutex_unlock(&s->open_sem_dac);
|
|
return -EBUSY;
|
|
}
|
|
mutex_unlock(&s->open_sem_dac);
|
|
interruptible_sleep_on(&s->open_wait_dac);
|
|
|
|
if (signal_pending(current)) {
|
|
printk("open - sig pending\n");
|
|
return -ERESTARTSYS;
|
|
}
|
|
mutex_lock(&s->open_sem_dac);
|
|
}
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
mutex_lock(&s->open_sem_adc);
|
|
while (s->open_mode & FMODE_READ) {
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
mutex_unlock(&s->open_sem_adc);
|
|
return -EBUSY;
|
|
}
|
|
mutex_unlock(&s->open_sem_adc);
|
|
interruptible_sleep_on(&s->open_wait_adc);
|
|
|
|
if (signal_pending(current)) {
|
|
printk("open - sig pending\n");
|
|
return -ERESTARTSYS;
|
|
}
|
|
mutex_lock(&s->open_sem_adc);
|
|
}
|
|
}
|
|
s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
|
|
if (file->f_mode & FMODE_READ) {
|
|
s->prop_adc.fmt = AFMT_S16_BE;
|
|
s->prop_adc.fmt_original = s->prop_adc.fmt;
|
|
s->prop_adc.channels = 2;
|
|
s->prop_adc.rate = 48000;
|
|
s->conversion = 0;
|
|
s->ena &= ~FMODE_READ;
|
|
s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
|
|
s->dma_adc.subdivision = 0;
|
|
mutex_unlock(&s->open_sem_adc);
|
|
|
|
if (prog_dmabuf_adc(s)) {
|
|
CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR
|
|
"cs4297a: adc Program dmabufs failed.\n"));
|
|
cs4297a_release(inode, file);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
s->prop_dac.fmt = AFMT_S16_BE;
|
|
s->prop_dac.fmt_original = s->prop_dac.fmt;
|
|
s->prop_dac.channels = 2;
|
|
s->prop_dac.rate = 48000;
|
|
s->conversion = 0;
|
|
s->ena &= ~FMODE_WRITE;
|
|
s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
|
|
s->dma_dac.subdivision = 0;
|
|
mutex_unlock(&s->open_sem_dac);
|
|
|
|
if (prog_dmabuf_dac(s)) {
|
|
CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR
|
|
"cs4297a: dac Program dmabufs failed.\n"));
|
|
cs4297a_release(inode, file);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2,
|
|
printk(KERN_INFO "cs4297a: cs4297a_open()- 0\n"));
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
|
|
// ******************************************************************************************
|
|
// Wave (audio) file operations struct.
|
|
// ******************************************************************************************
|
|
static const struct file_operations cs4297a_audio_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.read = cs4297a_read,
|
|
.write = cs4297a_write,
|
|
.poll = cs4297a_poll,
|
|
.ioctl = cs4297a_ioctl,
|
|
.mmap = cs4297a_mmap,
|
|
.open = cs4297a_open,
|
|
.release = cs4297a_release,
|
|
};
|
|
|
|
static void cs4297a_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct cs4297a_state *s = (struct cs4297a_state *) dev_id;
|
|
u32 status;
|
|
|
|
status = __raw_readq(SS_CSR(R_SER_STATUS_DEBUG));
|
|
|
|
CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO
|
|
"cs4297a: cs4297a_interrupt() HISR=0x%.8x\n", status));
|
|
|
|
#if 0
|
|
/* XXXKW what check *should* be done here? */
|
|
if (!(status & (M_SYNCSER_RX_EOP_COUNT | M_SYNCSER_RX_OVERRUN | M_SYNCSER_RX_SYNC_ERR))) {
|
|
status = __raw_readq(SS_CSR(R_SER_STATUS));
|
|
printk(KERN_ERR "cs4297a: unexpected interrupt (status %08x)\n", status);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
if (status & M_SYNCSER_RX_SYNC_ERR) {
|
|
status = __raw_readq(SS_CSR(R_SER_STATUS));
|
|
printk(KERN_ERR "cs4297a: rx sync error (status %08x)\n", status);
|
|
return;
|
|
}
|
|
|
|
if (status & M_SYNCSER_RX_OVERRUN) {
|
|
int newptr, i;
|
|
s->stats.rx_ovrrn++;
|
|
printk(KERN_ERR "cs4297a: receive FIFO overrun\n");
|
|
|
|
/* Fix things up: get the receive descriptor pool
|
|
clean and give them back to the hardware */
|
|
while (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_RX)))
|
|
;
|
|
newptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) -
|
|
s->dma_adc.descrtab_phys) / sizeof(serdma_descr_t));
|
|
for (i=0; i<DMA_DESCR; i++) {
|
|
s->dma_adc.descrtab[i].descr_a &= ~M_DMA_SERRX_SOP;
|
|
}
|
|
s->dma_adc.swptr = s->dma_adc.hwptr = newptr;
|
|
s->dma_adc.count = 0;
|
|
s->dma_adc.sb_swptr = s->dma_adc.sb_hwptr = s->dma_adc.sample_buf;
|
|
__raw_writeq(DMA_DESCR, SS_CSR(R_SER_DMA_DSCR_COUNT_RX));
|
|
}
|
|
|
|
spin_lock(&s->lock);
|
|
cs4297a_update_ptr(s,CS_TRUE);
|
|
spin_unlock(&s->lock);
|
|
|
|
CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO
|
|
"cs4297a: cs4297a_interrupt()-\n"));
|
|
}
|
|
|
|
#if 0
|
|
static struct initvol {
|
|
int mixch;
|
|
int vol;
|
|
} initvol[] __initdata = {
|
|
|
|
{SOUND_MIXER_WRITE_VOLUME, 0x4040},
|
|
{SOUND_MIXER_WRITE_PCM, 0x4040},
|
|
{SOUND_MIXER_WRITE_SYNTH, 0x4040},
|
|
{SOUND_MIXER_WRITE_CD, 0x4040},
|
|
{SOUND_MIXER_WRITE_LINE, 0x4040},
|
|
{SOUND_MIXER_WRITE_LINE1, 0x4040},
|
|
{SOUND_MIXER_WRITE_RECLEV, 0x0000},
|
|
{SOUND_MIXER_WRITE_SPEAKER, 0x4040},
|
|
{SOUND_MIXER_WRITE_MIC, 0x0000}
|
|
};
|
|
#endif
|
|
|
|
static int __init cs4297a_init(void)
|
|
{
|
|
struct cs4297a_state *s;
|
|
u32 pwr, id;
|
|
mm_segment_t fs;
|
|
int rval;
|
|
#ifndef CONFIG_BCM_CS4297A_CSWARM
|
|
u64 cfg;
|
|
int mdio_val;
|
|
#endif
|
|
|
|
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO
|
|
"cs4297a: cs4297a_init_module()+ \n"));
|
|
|
|
#ifndef CONFIG_BCM_CS4297A_CSWARM
|
|
mdio_val = __raw_readq(KSEG1 + A_MAC_REGISTER(2, R_MAC_MDIO)) &
|
|
(M_MAC_MDIO_DIR|M_MAC_MDIO_OUT);
|
|
|
|
/* Check syscfg for synchronous serial on port 1 */
|
|
cfg = __raw_readq(KSEG1 + A_SCD_SYSTEM_CFG);
|
|
if (!(cfg & M_SYS_SER1_ENABLE)) {
|
|
__raw_writeq(cfg | M_SYS_SER1_ENABLE, KSEG1+A_SCD_SYSTEM_CFG);
|
|
cfg = __raw_readq(KSEG1 + A_SCD_SYSTEM_CFG);
|
|
if (!(cfg & M_SYS_SER1_ENABLE)) {
|
|
printk(KERN_INFO "cs4297a: serial port 1 not configured for synchronous operation\n");
|
|
return -1;
|
|
}
|
|
|
|
printk(KERN_INFO "cs4297a: serial port 1 switching to synchronous operation\n");
|
|
|
|
/* Force the codec (on SWARM) to reset by clearing
|
|
GENO, preserving MDIO (no effect on CSWARM) */
|
|
__raw_writeq(mdio_val, KSEG1+A_MAC_REGISTER(2, R_MAC_MDIO));
|
|
udelay(10);
|
|
}
|
|
|
|
/* Now set GENO */
|
|
__raw_writeq(mdio_val | M_MAC_GENC, KSEG1+A_MAC_REGISTER(2, R_MAC_MDIO));
|
|
/* Give the codec some time to finish resetting (start the bit clock) */
|
|
udelay(100);
|
|
#endif
|
|
|
|
if (!(s = kzalloc(sizeof(struct cs4297a_state), GFP_KERNEL))) {
|
|
CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4297a: probe() no memory for state struct.\n"));
|
|
return -1;
|
|
}
|
|
s->magic = CS4297a_MAGIC;
|
|
init_waitqueue_head(&s->dma_adc.wait);
|
|
init_waitqueue_head(&s->dma_dac.wait);
|
|
init_waitqueue_head(&s->dma_adc.reg_wait);
|
|
init_waitqueue_head(&s->dma_dac.reg_wait);
|
|
init_waitqueue_head(&s->open_wait);
|
|
init_waitqueue_head(&s->open_wait_adc);
|
|
init_waitqueue_head(&s->open_wait_dac);
|
|
mutex_init(&s->open_sem_adc);
|
|
mutex_init(&s->open_sem_dac);
|
|
spin_lock_init(&s->lock);
|
|
|
|
s->irq = K_INT_SER_1;
|
|
|
|
if (request_irq
|
|
(s->irq, cs4297a_interrupt, 0, "Crystal CS4297a", s)) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1,
|
|
printk(KERN_ERR "cs4297a: irq %u in use\n", s->irq));
|
|
goto err_irq;
|
|
}
|
|
if ((s->dev_audio = register_sound_dsp(&cs4297a_audio_fops, -1)) <
|
|
0) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4297a: probe() register_sound_dsp() failed.\n"));
|
|
goto err_dev1;
|
|
}
|
|
if ((s->dev_mixer = register_sound_mixer(&cs4297a_mixer_fops, -1)) <
|
|
0) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4297a: probe() register_sound_mixer() failed.\n"));
|
|
goto err_dev2;
|
|
}
|
|
|
|
if (ser_init(s) || dma_init(s)) {
|
|
CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR
|
|
"cs4297a: ser_init failed.\n"));
|
|
goto err_dev3;
|
|
}
|
|
|
|
do {
|
|
udelay(4000);
|
|
rval = cs4297a_read_ac97(s, AC97_POWER_CONTROL, &pwr);
|
|
} while (!rval && (pwr != 0xf));
|
|
|
|
if (!rval) {
|
|
char *sb1250_duart_present;
|
|
|
|
fs = get_fs();
|
|
set_fs(KERNEL_DS);
|
|
#if 0
|
|
val = SOUND_MASK_LINE;
|
|
mixer_ioctl(s, SOUND_MIXER_WRITE_RECSRC, (unsigned long) &val);
|
|
for (i = 0; i < ARRAY_SIZE(initvol); i++) {
|
|
val = initvol[i].vol;
|
|
mixer_ioctl(s, initvol[i].mixch, (unsigned long) &val);
|
|
}
|
|
// cs4297a_write_ac97(s, 0x18, 0x0808);
|
|
#else
|
|
// cs4297a_write_ac97(s, 0x5e, 0x180);
|
|
cs4297a_write_ac97(s, 0x02, 0x0808);
|
|
cs4297a_write_ac97(s, 0x18, 0x0808);
|
|
#endif
|
|
set_fs(fs);
|
|
|
|
list_add(&s->list, &cs4297a_devs);
|
|
|
|
cs4297a_read_ac97(s, AC97_VENDOR_ID1, &id);
|
|
|
|
sb1250_duart_present = symbol_get(sb1250_duart_present);
|
|
if (sb1250_duart_present)
|
|
sb1250_duart_present[1] = 0;
|
|
|
|
printk(KERN_INFO "cs4297a: initialized (vendor id = %x)\n", id);
|
|
|
|
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4297a: cs4297a_init_module()-\n"));
|
|
|
|
return 0;
|
|
}
|
|
|
|
err_dev3:
|
|
unregister_sound_mixer(s->dev_mixer);
|
|
err_dev2:
|
|
unregister_sound_dsp(s->dev_audio);
|
|
err_dev1:
|
|
free_irq(s->irq, s);
|
|
err_irq:
|
|
kfree(s);
|
|
|
|
printk(KERN_INFO "cs4297a: initialization failed\n");
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void __exit cs4297a_cleanup(void)
|
|
{
|
|
/*
|
|
XXXKW
|
|
disable_irq, free_irq
|
|
drain DMA queue
|
|
disable DMA
|
|
disable TX/RX
|
|
free memory
|
|
*/
|
|
CS_DBGOUT(CS_INIT | CS_FUNCTION, 2,
|
|
printk(KERN_INFO "cs4297a: cleanup_cs4297a() finished\n"));
|
|
}
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
|
|
MODULE_DESCRIPTION("Cirrus Logic CS4297a Driver for Broadcom SWARM board");
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
module_init(cs4297a_init);
|
|
module_exit(cs4297a_cleanup);
|