linux/drivers/iio/adc/ti-ads7924.c
Hugo Villeneuve 4d82b2f98a iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
The Texas Instruments ADS7924 is a 4 channels, 12-bit analog to
digital converter (ADC) with an I2C interface.

Datasheet: https://www.ti.com/lit/gpn/ads7924
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20230115170623.3680647-2-hugo@hugovil.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21 18:19:49 +00:00

475 lines
12 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0
/*
* IIO driver for Texas Instruments ADS7924 ADC, 12-bit, 4-Channels, I2C
*
* Author: Hugo Villeneuve <hvilleneuve@dimonoff.com>
* Copyright 2022 DimOnOff
*
* based on iio/adc/ti-ads1015.c
* Copyright (c) 2016, Intel Corporation.
*
* Datasheet: https://www.ti.com/lit/gpn/ads7924
*/
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
#define ADS7924_CHANNELS 4
#define ADS7924_BITS 12
#define ADS7924_DATA_SHIFT 4
/* Registers. */
#define ADS7924_MODECNTRL_REG 0x00
#define ADS7924_INTCNTRL_REG 0x01
#define ADS7924_DATA0_U_REG 0x02
#define ADS7924_DATA0_L_REG 0x03
#define ADS7924_DATA1_U_REG 0x04
#define ADS7924_DATA1_L_REG 0x05
#define ADS7924_DATA2_U_REG 0x06
#define ADS7924_DATA2_L_REG 0x07
#define ADS7924_DATA3_U_REG 0x08
#define ADS7924_DATA3_L_REG 0x09
#define ADS7924_ULR0_REG 0x0A
#define ADS7924_LLR0_REG 0x0B
#define ADS7924_ULR1_REG 0x0C
#define ADS7924_LLR1_REG 0x0D
#define ADS7924_ULR2_REG 0x0E
#define ADS7924_LLR2_REG 0x0F
#define ADS7924_ULR3_REG 0x10
#define ADS7924_LLR3_REG 0x11
#define ADS7924_INTCONFIG_REG 0x12
#define ADS7924_SLPCONFIG_REG 0x13
#define ADS7924_ACQCONFIG_REG 0x14
#define ADS7924_PWRCONFIG_REG 0x15
#define ADS7924_RESET_REG 0x16
/*
* Register address INC bit: when set to '1', the register address is
* automatically incremented after every register read which allows convenient
* reading of multiple registers. Set INC to '0' when reading a single register.
*/
#define ADS7924_AUTO_INCREMENT_BIT BIT(7)
#define ADS7924_MODECNTRL_MODE_MASK GENMASK(7, 2)
#define ADS7924_MODECNTRL_SEL_MASK GENMASK(1, 0)
#define ADS7924_CFG_INTPOL_BIT 1
#define ADS7924_CFG_INTTRIG_BIT 0
#define ADS7924_CFG_INTPOL_MASK BIT(ADS7924_CFG_INTPOL_BIT)
#define ADS7924_CFG_INTTRIG_MASK BIT(ADS7924_CFG_INTTRIG_BIT)
/* Interrupt pin polarity */
#define ADS7924_CFG_INTPOL_LOW 0
#define ADS7924_CFG_INTPOL_HIGH 1
/* Interrupt pin signaling */
#define ADS7924_CFG_INTTRIG_LEVEL 0
#define ADS7924_CFG_INTTRIG_EDGE 1
/* Mode control values */
#define ADS7924_MODECNTRL_IDLE 0x00
#define ADS7924_MODECNTRL_AWAKE 0x20
#define ADS7924_MODECNTRL_MANUAL_SINGLE 0x30
#define ADS7924_MODECNTRL_MANUAL_SCAN 0x32
#define ADS7924_MODECNTRL_AUTO_SINGLE 0x31
#define ADS7924_MODECNTRL_AUTO_SCAN 0x33
#define ADS7924_MODECNTRL_AUTO_SINGLE_SLEEP 0x39
#define ADS7924_MODECNTRL_AUTO_SCAN_SLEEP 0x3B
#define ADS7924_MODECNTRL_AUTO_BURST_SLEEP 0x3F
#define ADS7924_ACQTIME_MASK GENMASK(4, 0)
#define ADS7924_PWRUPTIME_MASK GENMASK(4, 0)
/*
* The power-up time is allowed to elapse whenever the device has been shutdown
* in idle mode. Power-up time can allow external circuits, such as an
* operational amplifier, between the MUXOUT and ADCIN pins to turn on.
* The nominal time programmed by the PUTIME[4:0] register bits is given by:
* t PU = PWRUPTIME[4:0] × 2 μs
* If a power-up time is not required, set the bits to '0' to effectively bypass.
*/
#define ADS7924_PWRUPTIME_US 0 /* Bypass (0us). */
/*
* Acquisition Time according to ACQTIME[4:0] register bits.
* The Acquisition Time is given by:
* t ACQ = (ACQTIME[4:0] × 2 μs) + 6 μs
* Using default value of 0 for ACQTIME[4:0] results in a minimum acquisition
* time of 6us.
*/
#define ADS7924_ACQTIME_US 6
/* The conversion time is always 4μs and cannot be programmed by the user. */
#define ADS7924_CONVTIME_US 4
#define ADS7924_TOTAL_CONVTIME_US (ADS7924_PWRUPTIME_US + ADS7924_ACQTIME_US + \
ADS7924_CONVTIME_US)
#define ADS7924_V_CHAN(_chan, _addr) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.channel = _chan, \
.address = _addr, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.datasheet_name = "AIN"#_chan, \
}
struct ads7924_data {
struct device *dev;
struct regmap *regmap;
struct regulator *vref_reg;
/* GPIO descriptor for device hard-reset pin. */
struct gpio_desc *reset_gpio;
/*
* Protects ADC ops, e.g: concurrent sysfs/buffered
* data reads, configuration updates
*/
struct mutex lock;
/*
* Set to true when the ADC is switched to the continuous-conversion
* mode and exits from a power-down state. This flag is used to avoid
* getting the stale result from the conversion register.
*/
bool conv_invalid;
};
static bool ads7924_is_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case ADS7924_MODECNTRL_REG:
case ADS7924_INTCNTRL_REG:
case ADS7924_ULR0_REG:
case ADS7924_LLR0_REG:
case ADS7924_ULR1_REG:
case ADS7924_LLR1_REG:
case ADS7924_ULR2_REG:
case ADS7924_LLR2_REG:
case ADS7924_ULR3_REG:
case ADS7924_LLR3_REG:
case ADS7924_INTCONFIG_REG:
case ADS7924_SLPCONFIG_REG:
case ADS7924_ACQCONFIG_REG:
case ADS7924_PWRCONFIG_REG:
case ADS7924_RESET_REG:
return true;
default:
return false;
}
}
static const struct regmap_config ads7924_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = ADS7924_RESET_REG,
.writeable_reg = ads7924_is_writeable_reg,
};
static const struct iio_chan_spec ads7924_channels[] = {
ADS7924_V_CHAN(0, ADS7924_DATA0_U_REG),
ADS7924_V_CHAN(1, ADS7924_DATA1_U_REG),
ADS7924_V_CHAN(2, ADS7924_DATA2_U_REG),
ADS7924_V_CHAN(3, ADS7924_DATA3_U_REG),
};
static int ads7924_get_adc_result(struct ads7924_data *data,
struct iio_chan_spec const *chan, int *val)
{
int ret;
__be16 be_val;
if (chan->channel < 0 || chan->channel >= ADS7924_CHANNELS)
return -EINVAL;
if (data->conv_invalid) {
int conv_time;
conv_time = ADS7924_TOTAL_CONVTIME_US;
/* Allow 10% for internal clock inaccuracy. */
conv_time += conv_time / 10;
usleep_range(conv_time, conv_time + 1);
data->conv_invalid = false;
}
ret = regmap_raw_read(data->regmap, ADS7924_AUTO_INCREMENT_BIT |
chan->address, &be_val, sizeof(be_val));
if (ret)
return ret;
*val = be16_to_cpu(be_val) >> ADS7924_DATA_SHIFT;
return 0;
}
static int ads7924_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
{
int ret, vref_uv;
struct ads7924_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&data->lock);
ret = ads7924_get_adc_result(data, chan, val);
mutex_unlock(&data->lock);
if (ret < 0)
return ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
vref_uv = regulator_get_voltage(data->vref_reg);
if (vref_uv < 0)
return vref_uv;
*val = vref_uv / 1000; /* Convert reg voltage to mV */
*val2 = ADS7924_BITS;
return IIO_VAL_FRACTIONAL_LOG2;
default:
return -EINVAL;
}
}
static const struct iio_info ads7924_info = {
.read_raw = ads7924_read_raw,
};
static int ads7924_get_channels_config(struct i2c_client *client,
struct iio_dev *indio_dev)
{
struct ads7924_data *priv = iio_priv(indio_dev);
struct device *dev = priv->dev;
struct fwnode_handle *node;
int num_channels = 0;
device_for_each_child_node(dev, node) {
u32 pval;
unsigned int channel;
if (fwnode_property_read_u32(node, "reg", &pval)) {
dev_err(dev, "invalid reg on %pfw\n", node);
continue;
}
channel = pval;
if (channel >= ADS7924_CHANNELS) {
dev_err(dev, "invalid channel index %d on %pfw\n",
channel, node);
continue;
}
num_channels++;
}
if (!num_channels)
return -EINVAL;
return 0;
}
static int ads7924_set_conv_mode(struct ads7924_data *data, int mode)
{
int ret;
unsigned int mode_field;
struct device *dev = data->dev;
/*
* When switching between modes, be sure to first select the Awake mode
* and then switch to the desired mode. This procedure ensures the
* internal control logic is properly synchronized.
*/
if (mode != ADS7924_MODECNTRL_IDLE) {
mode_field = FIELD_PREP(ADS7924_MODECNTRL_MODE_MASK,
ADS7924_MODECNTRL_AWAKE);
ret = regmap_update_bits(data->regmap, ADS7924_MODECNTRL_REG,
ADS7924_MODECNTRL_MODE_MASK,
mode_field);
if (ret) {
dev_err(dev, "failed to set awake mode (%pe)\n",
ERR_PTR(ret));
return ret;
}
}
mode_field = FIELD_PREP(ADS7924_MODECNTRL_MODE_MASK, mode);
ret = regmap_update_bits(data->regmap, ADS7924_MODECNTRL_REG,
ADS7924_MODECNTRL_MODE_MASK, mode_field);
if (ret)
dev_err(dev, "failed to set mode %d (%pe)\n", mode,
ERR_PTR(ret));
return ret;
}
static int ads7924_reset(struct iio_dev *indio_dev)
{
struct ads7924_data *data = iio_priv(indio_dev);
if (data->reset_gpio) {
gpiod_set_value(data->reset_gpio, 1); /* Assert. */
/* Educated guess: assert time not specified in datasheet... */
mdelay(100);
gpiod_set_value(data->reset_gpio, 0); /* Deassert. */
return 0;
}
/*
* A write of 10101010 to this register will generate a
* software reset of the ADS7924.
*/
return regmap_write(data->regmap, ADS7924_RESET_REG, 0b10101010);
};
static void ads7924_reg_disable(void *data)
{
regulator_disable(data);
}
static void ads7924_set_idle_mode(void *data)
{
ads7924_set_conv_mode(data, ADS7924_MODECNTRL_IDLE);
}
static int ads7924_probe(struct i2c_client *client)
{
struct iio_dev *indio_dev;
struct ads7924_data *data;
struct device *dev = &client->dev;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return dev_err_probe(dev, -ENOMEM,
"failed to allocate iio device\n");
data = iio_priv(indio_dev);
data->dev = dev;
/* Initialize the reset GPIO as output with an initial value of 0. */
data->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(data->reset_gpio))
return dev_err_probe(dev, PTR_ERR(data->reset_gpio),
"failed to get request reset GPIO\n");
mutex_init(&data->lock);
indio_dev->name = "ads7924";
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ads7924_channels;
indio_dev->num_channels = ARRAY_SIZE(ads7924_channels);
indio_dev->info = &ads7924_info;
ret = ads7924_get_channels_config(client, indio_dev);
if (ret < 0)
return dev_err_probe(dev, ret,
"failed to get channels configuration\n");
data->regmap = devm_regmap_init_i2c(client, &ads7924_regmap_config);
if (IS_ERR(data->regmap))
return dev_err_probe(dev, PTR_ERR(data->regmap),
"failed to init regmap\n");
data->vref_reg = devm_regulator_get(dev, "vref");
if (IS_ERR(data->vref_reg))
return dev_err_probe(dev, PTR_ERR(data->vref_reg),
"failed to get vref regulator\n");
ret = regulator_enable(data->vref_reg);
if (ret)
return dev_err_probe(dev, ret,
"failed to enable regulator\n");
ret = devm_add_action_or_reset(dev, ads7924_reg_disable, data->vref_reg);
if (ret)
return dev_err_probe(dev, ret,
"failed to add regulator disable action\n");
ret = ads7924_reset(indio_dev);
if (ret < 0)
return dev_err_probe(dev, ret,
"failed to reset device\n");
ret = ads7924_set_conv_mode(data, ADS7924_MODECNTRL_AUTO_SCAN);
if (ret)
return dev_err_probe(dev, ret,
"failed to set conversion mode\n");
ret = devm_add_action_or_reset(dev, ads7924_set_idle_mode, data);
if (ret)
return dev_err_probe(dev, ret,
"failed to add idle mode action\n");
/* Use minimum signal acquire time. */
ret = regmap_update_bits(data->regmap, ADS7924_ACQCONFIG_REG,
ADS7924_ACQTIME_MASK,
FIELD_PREP(ADS7924_ACQTIME_MASK, 0));
if (ret < 0)
return dev_err_probe(dev, ret,
"failed to configure signal acquire time\n");
/* Disable power-up time. */
ret = regmap_update_bits(data->regmap, ADS7924_PWRCONFIG_REG,
ADS7924_PWRUPTIME_MASK,
FIELD_PREP(ADS7924_PWRUPTIME_MASK, 0));
if (ret < 0)
return dev_err_probe(dev, ret,
"failed to configure power-up time\n");
data->conv_invalid = true;
ret = devm_iio_device_register(dev, indio_dev);
if (ret < 0)
return dev_err_probe(dev, ret,
"failed to register IIO device\n");
return 0;
}
static const struct i2c_device_id ads7924_id[] = {
{ "ads7924", 0 },
{}
};
MODULE_DEVICE_TABLE(i2c, ads7924_id);
static const struct of_device_id ads7924_of_match[] = {
{ .compatible = "ti,ads7924", },
{}
};
MODULE_DEVICE_TABLE(of, ads7924_of_match);
static struct i2c_driver ads7924_driver = {
.driver = {
.name = "ads7924",
.of_match_table = ads7924_of_match,
},
.probe_new = ads7924_probe,
.id_table = ads7924_id,
};
module_i2c_driver(ads7924_driver);
MODULE_AUTHOR("Hugo Villeneuve <hvilleneuve@dimonoff.com>");
MODULE_DESCRIPTION("Texas Instruments ADS7924 ADC I2C driver");
MODULE_LICENSE("GPL");