linux/drivers/tty
James Hogan 4cebec609a TTY: Add MIPS EJTAG Fast Debug Channel TTY driver
Add TTY driver and consoles for the MIPS EJTAG Fast Debug Channel (FDC),
which is found on the per-CPU MIPS Common Device Mapped Memory (CDMM)
bus.

The FDC is a per-CPU device which is used to communicate with an EJTAG
probe. RX and TX FIFOs exist, containing 32-bits of data and 4-bit
channel numbers. 16 general data streams are implemented on this for TTY
and console use by encoding up to 4 bytes on each 32-bit FDC word.

The TTY devices are named e.g. /dev/ttyFDC3c2 for channel 2 of the FDC
attached to logical CPU 3.

These can be used for getting the kernel log, a login prompt, or as a
GDB remote transport, all over EJTAG and without needing a serial port.

It can have an interrupt to notify of when incoming data is available in
the RX FIFO or when the TX FIFO is no longer full. The detection of this
interrupt occurs in architecture / platform code, but it may be shared
with the timer and/or performance counter interrupt.

Due to the per-CPU nature of the hardware, all outgoing TTY data is
written out from a kthread which is pinned to the appropriate CPU.

The console is not bound to a specific CPU, so output will appear on the
chosen channel on whichever CPU the code is executing on. Enable with
e.g. console=fdc1 in kernel arguments. /dev/console is bound to the same
channel on the boot CPU's FDC if it exists.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9146/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31 12:04:12 +02:00
..
hvc s390/hvc_iucv: add simple wildcard matches to the iucv allow filter 2015-01-22 12:16:56 +01:00
ipwireless tty: ipwireless: Fix probable mask then right shift defects 2014-11-05 20:06:33 -08:00
serial serial: 8250_dw: Fix deadlock in LCR workaround 2015-03-11 16:39:52 +01:00
vt vt: provide notifications on selection changes 2015-02-02 10:09:54 -08:00
amiserial.c TTY: fix misspelling of current function in string 2015-01-09 14:38:15 -08:00
bfin_jtag_comm.c TTY: bfin_jtag_comm: remove incorrect wait_until_sent operation 2015-03-07 03:44:14 +01:00
cyclades.c
ehv_bytechan.c tty: remove unused variable sprop 2015-02-03 15:52:13 -08:00
goldfish.c goldfish: off by one in goldfish_tty_console_setup() 2014-11-05 16:12:45 -08:00
isicom.c tty/isicom: fix big-endian compile warning 2015-02-02 10:11:25 -08:00
Kconfig TTY: Add MIPS EJTAG Fast Debug Channel TTY driver 2015-03-31 12:04:12 +02:00
Makefile TTY: Add MIPS EJTAG Fast Debug Channel TTY driver 2015-03-31 12:04:12 +02:00
metag_da.c
mips_ejtag_fdc.c TTY: Add MIPS EJTAG Fast Debug Channel TTY driver 2015-03-31 12:04:12 +02:00
moxa.c
moxa.h
mxser.c
mxser.h
n_gsm.c
n_hdlc.c
n_r3964.c
n_tracerouter.c
n_tracesink.c
n_tracesink.h
n_tty.c n_tty: Fix signal handling flushes 2015-02-02 10:11:27 -08:00
nozomi.c
pty.c n_tty: Fix signal handling flushes 2015-02-02 10:11:27 -08:00
rocket_int.h
rocket.c TTY: fix misspelling of current function in string 2015-01-09 14:38:15 -08:00
rocket.h
synclink_gt.c
synclink.c
synclinkmp.c
sysrq.c oom, PM: make OOM detection in the freezer path raceless 2015-02-11 17:06:03 -08:00
tty_audit.c
tty_buffer.c pty: Fix buffer flush deadlock 2015-02-02 10:11:27 -08:00
tty_io.c tty: fix up atime/mtime mess, take four 2015-03-07 03:06:51 +01:00
tty_ioctl.c TTY: fix tty_wait_until_sent maximum timeout 2015-03-07 03:44:15 +01:00
tty_ldisc.c tty: Allow safe access to termios for set_ldisc() handlers 2014-11-06 14:57:27 -08:00
tty_ldsem.c
tty_mutex.c tty: Make lock subclasses available for other tty locks 2015-02-02 10:11:27 -08:00
tty_port.c tty: Deletion of unnecessary checks before two function calls 2014-11-26 19:35:49 -08:00