mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 05:32:00 +00:00
3b465a1491
Make it explicit that the SCSI host template is not modified. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-35-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
961 lines
25 KiB
C
961 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ESP front-end for Amiga ZORRO SCSI systems.
|
|
*
|
|
* Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
|
|
*
|
|
* Copyright (C) 2011,2018 Michael Schmitz (schmitz@debian.org) for
|
|
* migration to ESP SCSI core
|
|
*
|
|
* Copyright (C) 2013 Tuomas Vainikka (tuomas.vainikka@aalto.fi) for
|
|
* Blizzard 1230 DMA and probe function fixes
|
|
*/
|
|
/*
|
|
* ZORRO bus code from:
|
|
*/
|
|
/*
|
|
* Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
|
|
* Amiga MacroSystemUS WarpEngine SCSI controller.
|
|
* Amiga Technologies/DKB A4091 SCSI controller.
|
|
*
|
|
* Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
|
|
* plus modifications of the 53c7xx.c driver to support the Amiga.
|
|
*
|
|
* Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/zorro.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pgtable.h>
|
|
|
|
#include <asm/page.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/amigahw.h>
|
|
#include <asm/amigaints.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_transport_spi.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
|
|
#include "esp_scsi.h"
|
|
|
|
MODULE_AUTHOR("Michael Schmitz <schmitz@debian.org>");
|
|
MODULE_DESCRIPTION("Amiga Zorro NCR5C9x (ESP) driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* per-board register layout definitions */
|
|
|
|
/* Blizzard 1230 DMA interface */
|
|
|
|
struct blz1230_dma_registers {
|
|
unsigned char dma_addr; /* DMA address [0x0000] */
|
|
unsigned char dmapad2[0x7fff];
|
|
unsigned char dma_latch; /* DMA latch [0x8000] */
|
|
};
|
|
|
|
/* Blizzard 1230II DMA interface */
|
|
|
|
struct blz1230II_dma_registers {
|
|
unsigned char dma_addr; /* DMA address [0x0000] */
|
|
unsigned char dmapad2[0xf];
|
|
unsigned char dma_latch; /* DMA latch [0x0010] */
|
|
};
|
|
|
|
/* Blizzard 2060 DMA interface */
|
|
|
|
struct blz2060_dma_registers {
|
|
unsigned char dma_led_ctrl; /* DMA led control [0x000] */
|
|
unsigned char dmapad1[0x0f];
|
|
unsigned char dma_addr0; /* DMA address (MSB) [0x010] */
|
|
unsigned char dmapad2[0x03];
|
|
unsigned char dma_addr1; /* DMA address [0x014] */
|
|
unsigned char dmapad3[0x03];
|
|
unsigned char dma_addr2; /* DMA address [0x018] */
|
|
unsigned char dmapad4[0x03];
|
|
unsigned char dma_addr3; /* DMA address (LSB) [0x01c] */
|
|
};
|
|
|
|
/* DMA control bits */
|
|
#define DMA_WRITE 0x80000000
|
|
|
|
/* Cyberstorm DMA interface */
|
|
|
|
struct cyber_dma_registers {
|
|
unsigned char dma_addr0; /* DMA address (MSB) [0x000] */
|
|
unsigned char dmapad1[1];
|
|
unsigned char dma_addr1; /* DMA address [0x002] */
|
|
unsigned char dmapad2[1];
|
|
unsigned char dma_addr2; /* DMA address [0x004] */
|
|
unsigned char dmapad3[1];
|
|
unsigned char dma_addr3; /* DMA address (LSB) [0x006] */
|
|
unsigned char dmapad4[0x3fb];
|
|
unsigned char cond_reg; /* DMA cond (ro) [0x402] */
|
|
#define ctrl_reg cond_reg /* DMA control (wo) [0x402] */
|
|
};
|
|
|
|
/* DMA control bits */
|
|
#define CYBER_DMA_WRITE 0x40 /* DMA direction. 1 = write */
|
|
#define CYBER_DMA_Z3 0x20 /* 16 (Z2) or 32 (CHIP/Z3) bit DMA transfer */
|
|
|
|
/* DMA status bits */
|
|
#define CYBER_DMA_HNDL_INTR 0x80 /* DMA IRQ pending? */
|
|
|
|
/* The CyberStorm II DMA interface */
|
|
struct cyberII_dma_registers {
|
|
unsigned char cond_reg; /* DMA cond (ro) [0x000] */
|
|
#define ctrl_reg cond_reg /* DMA control (wo) [0x000] */
|
|
unsigned char dmapad4[0x3f];
|
|
unsigned char dma_addr0; /* DMA address (MSB) [0x040] */
|
|
unsigned char dmapad1[3];
|
|
unsigned char dma_addr1; /* DMA address [0x044] */
|
|
unsigned char dmapad2[3];
|
|
unsigned char dma_addr2; /* DMA address [0x048] */
|
|
unsigned char dmapad3[3];
|
|
unsigned char dma_addr3; /* DMA address (LSB) [0x04c] */
|
|
};
|
|
|
|
/* Fastlane DMA interface */
|
|
|
|
struct fastlane_dma_registers {
|
|
unsigned char cond_reg; /* DMA status (ro) [0x0000] */
|
|
#define ctrl_reg cond_reg /* DMA control (wo) [0x0000] */
|
|
char dmapad1[0x3f];
|
|
unsigned char clear_strobe; /* DMA clear (wo) [0x0040] */
|
|
};
|
|
|
|
/*
|
|
* The controller registers can be found in the Z2 config area at these
|
|
* offsets:
|
|
*/
|
|
#define FASTLANE_ESP_ADDR 0x1000001
|
|
|
|
/* DMA status bits */
|
|
#define FASTLANE_DMA_MINT 0x80
|
|
#define FASTLANE_DMA_IACT 0x40
|
|
#define FASTLANE_DMA_CREQ 0x20
|
|
|
|
/* DMA control bits */
|
|
#define FASTLANE_DMA_FCODE 0xa0
|
|
#define FASTLANE_DMA_MASK 0xf3
|
|
#define FASTLANE_DMA_WRITE 0x08 /* 1 = write */
|
|
#define FASTLANE_DMA_ENABLE 0x04 /* Enable DMA */
|
|
#define FASTLANE_DMA_EDI 0x02 /* Enable DMA IRQ ? */
|
|
#define FASTLANE_DMA_ESI 0x01 /* Enable SCSI IRQ */
|
|
|
|
/*
|
|
* private data used for driver
|
|
*/
|
|
struct zorro_esp_priv {
|
|
struct esp *esp; /* our ESP instance - for Scsi_host* */
|
|
void __iomem *board_base; /* virtual address (Zorro III board) */
|
|
int zorro3; /* board is Zorro III */
|
|
unsigned char ctrl_data; /* shadow copy of ctrl_reg */
|
|
};
|
|
|
|
/*
|
|
* On all implementations except for the Oktagon, padding between ESP
|
|
* registers is three bytes.
|
|
* On Oktagon, it is one byte - use a different accessor there.
|
|
*
|
|
* Oktagon needs PDMA - currently unsupported!
|
|
*/
|
|
|
|
static void zorro_esp_write8(struct esp *esp, u8 val, unsigned long reg)
|
|
{
|
|
writeb(val, esp->regs + (reg * 4UL));
|
|
}
|
|
|
|
static u8 zorro_esp_read8(struct esp *esp, unsigned long reg)
|
|
{
|
|
return readb(esp->regs + (reg * 4UL));
|
|
}
|
|
|
|
static int zorro_esp_irq_pending(struct esp *esp)
|
|
{
|
|
/* check ESP status register; DMA has no status reg. */
|
|
if (zorro_esp_read8(esp, ESP_STATUS) & ESP_STAT_INTR)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cyber_esp_irq_pending(struct esp *esp)
|
|
{
|
|
struct cyber_dma_registers __iomem *dregs = esp->dma_regs;
|
|
unsigned char dma_status = readb(&dregs->cond_reg);
|
|
|
|
/* It's important to check the DMA IRQ bit in the correct way! */
|
|
return ((zorro_esp_read8(esp, ESP_STATUS) & ESP_STAT_INTR) &&
|
|
(dma_status & CYBER_DMA_HNDL_INTR));
|
|
}
|
|
|
|
static int fastlane_esp_irq_pending(struct esp *esp)
|
|
{
|
|
struct fastlane_dma_registers __iomem *dregs = esp->dma_regs;
|
|
unsigned char dma_status;
|
|
|
|
dma_status = readb(&dregs->cond_reg);
|
|
|
|
if (dma_status & FASTLANE_DMA_IACT)
|
|
return 0; /* not our IRQ */
|
|
|
|
/* Return non-zero if ESP requested IRQ */
|
|
return (
|
|
(dma_status & FASTLANE_DMA_CREQ) &&
|
|
(!(dma_status & FASTLANE_DMA_MINT)) &&
|
|
(zorro_esp_read8(esp, ESP_STATUS) & ESP_STAT_INTR));
|
|
}
|
|
|
|
static u32 zorro_esp_dma_length_limit(struct esp *esp, u32 dma_addr,
|
|
u32 dma_len)
|
|
{
|
|
return dma_len > (1U << 16) ? (1U << 16) : dma_len;
|
|
}
|
|
|
|
static u32 fastlane_esp_dma_length_limit(struct esp *esp, u32 dma_addr,
|
|
u32 dma_len)
|
|
{
|
|
/* The old driver used 0xfffc as limit, so do that here too */
|
|
return dma_len > 0xfffc ? 0xfffc : dma_len;
|
|
}
|
|
|
|
static void zorro_esp_reset_dma(struct esp *esp)
|
|
{
|
|
/* nothing to do here */
|
|
}
|
|
|
|
static void zorro_esp_dma_drain(struct esp *esp)
|
|
{
|
|
/* nothing to do here */
|
|
}
|
|
|
|
static void zorro_esp_dma_invalidate(struct esp *esp)
|
|
{
|
|
/* nothing to do here */
|
|
}
|
|
|
|
static void fastlane_esp_dma_invalidate(struct esp *esp)
|
|
{
|
|
struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
|
|
struct fastlane_dma_registers __iomem *dregs = esp->dma_regs;
|
|
unsigned char *ctrl_data = &zep->ctrl_data;
|
|
|
|
*ctrl_data = (*ctrl_data & FASTLANE_DMA_MASK);
|
|
writeb(0, &dregs->clear_strobe);
|
|
z_writel(0, zep->board_base);
|
|
}
|
|
|
|
/* Blizzard 1230/60 SCSI-IV DMA */
|
|
|
|
static void zorro_esp_send_blz1230_dma_cmd(struct esp *esp, u32 addr,
|
|
u32 esp_count, u32 dma_count, int write, u8 cmd)
|
|
{
|
|
struct blz1230_dma_registers __iomem *dregs = esp->dma_regs;
|
|
u8 phase = esp->sreg & ESP_STAT_PMASK;
|
|
|
|
/*
|
|
* Use PIO if transferring message bytes to esp->command_block_dma.
|
|
* PIO requires a virtual address, so substitute esp->command_block
|
|
* for addr.
|
|
*/
|
|
if (phase == ESP_MIP && addr == esp->command_block_dma) {
|
|
esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
|
|
dma_count, write, cmd);
|
|
return;
|
|
}
|
|
|
|
/* Clear the results of a possible prior esp->ops->send_dma_cmd() */
|
|
esp->send_cmd_error = 0;
|
|
esp->send_cmd_residual = 0;
|
|
|
|
if (write)
|
|
/* DMA receive */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_FROM_DEVICE);
|
|
else
|
|
/* DMA send */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_TO_DEVICE);
|
|
|
|
addr >>= 1;
|
|
if (write)
|
|
addr &= ~(DMA_WRITE);
|
|
else
|
|
addr |= DMA_WRITE;
|
|
|
|
writeb((addr >> 24) & 0xff, &dregs->dma_latch);
|
|
writeb((addr >> 24) & 0xff, &dregs->dma_addr);
|
|
writeb((addr >> 16) & 0xff, &dregs->dma_addr);
|
|
writeb((addr >> 8) & 0xff, &dregs->dma_addr);
|
|
writeb(addr & 0xff, &dregs->dma_addr);
|
|
|
|
scsi_esp_cmd(esp, ESP_CMD_DMA);
|
|
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
|
|
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
|
|
|
|
scsi_esp_cmd(esp, cmd);
|
|
}
|
|
|
|
/* Blizzard 1230-II DMA */
|
|
|
|
static void zorro_esp_send_blz1230II_dma_cmd(struct esp *esp, u32 addr,
|
|
u32 esp_count, u32 dma_count, int write, u8 cmd)
|
|
{
|
|
struct blz1230II_dma_registers __iomem *dregs = esp->dma_regs;
|
|
u8 phase = esp->sreg & ESP_STAT_PMASK;
|
|
|
|
/* Use PIO if transferring message bytes to esp->command_block_dma */
|
|
if (phase == ESP_MIP && addr == esp->command_block_dma) {
|
|
esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
|
|
dma_count, write, cmd);
|
|
return;
|
|
}
|
|
|
|
esp->send_cmd_error = 0;
|
|
esp->send_cmd_residual = 0;
|
|
|
|
if (write)
|
|
/* DMA receive */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_FROM_DEVICE);
|
|
else
|
|
/* DMA send */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_TO_DEVICE);
|
|
|
|
addr >>= 1;
|
|
if (write)
|
|
addr &= ~(DMA_WRITE);
|
|
else
|
|
addr |= DMA_WRITE;
|
|
|
|
writeb((addr >> 24) & 0xff, &dregs->dma_latch);
|
|
writeb((addr >> 16) & 0xff, &dregs->dma_addr);
|
|
writeb((addr >> 8) & 0xff, &dregs->dma_addr);
|
|
writeb(addr & 0xff, &dregs->dma_addr);
|
|
|
|
scsi_esp_cmd(esp, ESP_CMD_DMA);
|
|
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
|
|
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
|
|
|
|
scsi_esp_cmd(esp, cmd);
|
|
}
|
|
|
|
/* Blizzard 2060 DMA */
|
|
|
|
static void zorro_esp_send_blz2060_dma_cmd(struct esp *esp, u32 addr,
|
|
u32 esp_count, u32 dma_count, int write, u8 cmd)
|
|
{
|
|
struct blz2060_dma_registers __iomem *dregs = esp->dma_regs;
|
|
u8 phase = esp->sreg & ESP_STAT_PMASK;
|
|
|
|
/* Use PIO if transferring message bytes to esp->command_block_dma */
|
|
if (phase == ESP_MIP && addr == esp->command_block_dma) {
|
|
esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
|
|
dma_count, write, cmd);
|
|
return;
|
|
}
|
|
|
|
esp->send_cmd_error = 0;
|
|
esp->send_cmd_residual = 0;
|
|
|
|
if (write)
|
|
/* DMA receive */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_FROM_DEVICE);
|
|
else
|
|
/* DMA send */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_TO_DEVICE);
|
|
|
|
addr >>= 1;
|
|
if (write)
|
|
addr &= ~(DMA_WRITE);
|
|
else
|
|
addr |= DMA_WRITE;
|
|
|
|
writeb(addr & 0xff, &dregs->dma_addr3);
|
|
writeb((addr >> 8) & 0xff, &dregs->dma_addr2);
|
|
writeb((addr >> 16) & 0xff, &dregs->dma_addr1);
|
|
writeb((addr >> 24) & 0xff, &dregs->dma_addr0);
|
|
|
|
scsi_esp_cmd(esp, ESP_CMD_DMA);
|
|
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
|
|
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
|
|
|
|
scsi_esp_cmd(esp, cmd);
|
|
}
|
|
|
|
/* Cyberstorm I DMA */
|
|
|
|
static void zorro_esp_send_cyber_dma_cmd(struct esp *esp, u32 addr,
|
|
u32 esp_count, u32 dma_count, int write, u8 cmd)
|
|
{
|
|
struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
|
|
struct cyber_dma_registers __iomem *dregs = esp->dma_regs;
|
|
u8 phase = esp->sreg & ESP_STAT_PMASK;
|
|
unsigned char *ctrl_data = &zep->ctrl_data;
|
|
|
|
/* Use PIO if transferring message bytes to esp->command_block_dma */
|
|
if (phase == ESP_MIP && addr == esp->command_block_dma) {
|
|
esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
|
|
dma_count, write, cmd);
|
|
return;
|
|
}
|
|
|
|
esp->send_cmd_error = 0;
|
|
esp->send_cmd_residual = 0;
|
|
|
|
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
|
|
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
|
|
|
|
if (write) {
|
|
/* DMA receive */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_FROM_DEVICE);
|
|
addr &= ~(1);
|
|
} else {
|
|
/* DMA send */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_TO_DEVICE);
|
|
addr |= 1;
|
|
}
|
|
|
|
writeb((addr >> 24) & 0xff, &dregs->dma_addr0);
|
|
writeb((addr >> 16) & 0xff, &dregs->dma_addr1);
|
|
writeb((addr >> 8) & 0xff, &dregs->dma_addr2);
|
|
writeb(addr & 0xff, &dregs->dma_addr3);
|
|
|
|
if (write)
|
|
*ctrl_data &= ~(CYBER_DMA_WRITE);
|
|
else
|
|
*ctrl_data |= CYBER_DMA_WRITE;
|
|
|
|
*ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
|
|
|
|
writeb(*ctrl_data, &dregs->ctrl_reg);
|
|
|
|
scsi_esp_cmd(esp, cmd);
|
|
}
|
|
|
|
/* Cyberstorm II DMA */
|
|
|
|
static void zorro_esp_send_cyberII_dma_cmd(struct esp *esp, u32 addr,
|
|
u32 esp_count, u32 dma_count, int write, u8 cmd)
|
|
{
|
|
struct cyberII_dma_registers __iomem *dregs = esp->dma_regs;
|
|
u8 phase = esp->sreg & ESP_STAT_PMASK;
|
|
|
|
/* Use PIO if transferring message bytes to esp->command_block_dma */
|
|
if (phase == ESP_MIP && addr == esp->command_block_dma) {
|
|
esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
|
|
dma_count, write, cmd);
|
|
return;
|
|
}
|
|
|
|
esp->send_cmd_error = 0;
|
|
esp->send_cmd_residual = 0;
|
|
|
|
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
|
|
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
|
|
|
|
if (write) {
|
|
/* DMA receive */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_FROM_DEVICE);
|
|
addr &= ~(1);
|
|
} else {
|
|
/* DMA send */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_TO_DEVICE);
|
|
addr |= 1;
|
|
}
|
|
|
|
writeb((addr >> 24) & 0xff, &dregs->dma_addr0);
|
|
writeb((addr >> 16) & 0xff, &dregs->dma_addr1);
|
|
writeb((addr >> 8) & 0xff, &dregs->dma_addr2);
|
|
writeb(addr & 0xff, &dregs->dma_addr3);
|
|
|
|
scsi_esp_cmd(esp, cmd);
|
|
}
|
|
|
|
/* Fastlane DMA */
|
|
|
|
static void zorro_esp_send_fastlane_dma_cmd(struct esp *esp, u32 addr,
|
|
u32 esp_count, u32 dma_count, int write, u8 cmd)
|
|
{
|
|
struct zorro_esp_priv *zep = dev_get_drvdata(esp->dev);
|
|
struct fastlane_dma_registers __iomem *dregs = esp->dma_regs;
|
|
u8 phase = esp->sreg & ESP_STAT_PMASK;
|
|
unsigned char *ctrl_data = &zep->ctrl_data;
|
|
|
|
/* Use PIO if transferring message bytes to esp->command_block_dma */
|
|
if (phase == ESP_MIP && addr == esp->command_block_dma) {
|
|
esp_send_pio_cmd(esp, (u32)esp->command_block, esp_count,
|
|
dma_count, write, cmd);
|
|
return;
|
|
}
|
|
|
|
esp->send_cmd_error = 0;
|
|
esp->send_cmd_residual = 0;
|
|
|
|
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
|
|
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
|
|
|
|
if (write) {
|
|
/* DMA receive */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_FROM_DEVICE);
|
|
addr &= ~(1);
|
|
} else {
|
|
/* DMA send */
|
|
dma_sync_single_for_device(esp->dev, addr, esp_count,
|
|
DMA_TO_DEVICE);
|
|
addr |= 1;
|
|
}
|
|
|
|
writeb(0, &dregs->clear_strobe);
|
|
z_writel(addr, ((addr & 0x00ffffff) + zep->board_base));
|
|
|
|
if (write) {
|
|
*ctrl_data = (*ctrl_data & FASTLANE_DMA_MASK) |
|
|
FASTLANE_DMA_ENABLE;
|
|
} else {
|
|
*ctrl_data = ((*ctrl_data & FASTLANE_DMA_MASK) |
|
|
FASTLANE_DMA_ENABLE |
|
|
FASTLANE_DMA_WRITE);
|
|
}
|
|
|
|
writeb(*ctrl_data, &dregs->ctrl_reg);
|
|
|
|
scsi_esp_cmd(esp, cmd);
|
|
}
|
|
|
|
static int zorro_esp_dma_error(struct esp *esp)
|
|
{
|
|
return esp->send_cmd_error;
|
|
}
|
|
|
|
/* per-board ESP driver ops */
|
|
|
|
static const struct esp_driver_ops blz1230_esp_ops = {
|
|
.esp_write8 = zorro_esp_write8,
|
|
.esp_read8 = zorro_esp_read8,
|
|
.irq_pending = zorro_esp_irq_pending,
|
|
.dma_length_limit = zorro_esp_dma_length_limit,
|
|
.reset_dma = zorro_esp_reset_dma,
|
|
.dma_drain = zorro_esp_dma_drain,
|
|
.dma_invalidate = zorro_esp_dma_invalidate,
|
|
.send_dma_cmd = zorro_esp_send_blz1230_dma_cmd,
|
|
.dma_error = zorro_esp_dma_error,
|
|
};
|
|
|
|
static const struct esp_driver_ops blz1230II_esp_ops = {
|
|
.esp_write8 = zorro_esp_write8,
|
|
.esp_read8 = zorro_esp_read8,
|
|
.irq_pending = zorro_esp_irq_pending,
|
|
.dma_length_limit = zorro_esp_dma_length_limit,
|
|
.reset_dma = zorro_esp_reset_dma,
|
|
.dma_drain = zorro_esp_dma_drain,
|
|
.dma_invalidate = zorro_esp_dma_invalidate,
|
|
.send_dma_cmd = zorro_esp_send_blz1230II_dma_cmd,
|
|
.dma_error = zorro_esp_dma_error,
|
|
};
|
|
|
|
static const struct esp_driver_ops blz2060_esp_ops = {
|
|
.esp_write8 = zorro_esp_write8,
|
|
.esp_read8 = zorro_esp_read8,
|
|
.irq_pending = zorro_esp_irq_pending,
|
|
.dma_length_limit = zorro_esp_dma_length_limit,
|
|
.reset_dma = zorro_esp_reset_dma,
|
|
.dma_drain = zorro_esp_dma_drain,
|
|
.dma_invalidate = zorro_esp_dma_invalidate,
|
|
.send_dma_cmd = zorro_esp_send_blz2060_dma_cmd,
|
|
.dma_error = zorro_esp_dma_error,
|
|
};
|
|
|
|
static const struct esp_driver_ops cyber_esp_ops = {
|
|
.esp_write8 = zorro_esp_write8,
|
|
.esp_read8 = zorro_esp_read8,
|
|
.irq_pending = cyber_esp_irq_pending,
|
|
.dma_length_limit = zorro_esp_dma_length_limit,
|
|
.reset_dma = zorro_esp_reset_dma,
|
|
.dma_drain = zorro_esp_dma_drain,
|
|
.dma_invalidate = zorro_esp_dma_invalidate,
|
|
.send_dma_cmd = zorro_esp_send_cyber_dma_cmd,
|
|
.dma_error = zorro_esp_dma_error,
|
|
};
|
|
|
|
static const struct esp_driver_ops cyberII_esp_ops = {
|
|
.esp_write8 = zorro_esp_write8,
|
|
.esp_read8 = zorro_esp_read8,
|
|
.irq_pending = zorro_esp_irq_pending,
|
|
.dma_length_limit = zorro_esp_dma_length_limit,
|
|
.reset_dma = zorro_esp_reset_dma,
|
|
.dma_drain = zorro_esp_dma_drain,
|
|
.dma_invalidate = zorro_esp_dma_invalidate,
|
|
.send_dma_cmd = zorro_esp_send_cyberII_dma_cmd,
|
|
.dma_error = zorro_esp_dma_error,
|
|
};
|
|
|
|
static const struct esp_driver_ops fastlane_esp_ops = {
|
|
.esp_write8 = zorro_esp_write8,
|
|
.esp_read8 = zorro_esp_read8,
|
|
.irq_pending = fastlane_esp_irq_pending,
|
|
.dma_length_limit = fastlane_esp_dma_length_limit,
|
|
.reset_dma = zorro_esp_reset_dma,
|
|
.dma_drain = zorro_esp_dma_drain,
|
|
.dma_invalidate = fastlane_esp_dma_invalidate,
|
|
.send_dma_cmd = zorro_esp_send_fastlane_dma_cmd,
|
|
.dma_error = zorro_esp_dma_error,
|
|
};
|
|
|
|
/* Zorro driver config data */
|
|
|
|
struct zorro_driver_data {
|
|
const char *name;
|
|
unsigned long offset;
|
|
unsigned long dma_offset;
|
|
int absolute; /* offset is absolute address */
|
|
int scsi_option;
|
|
const struct esp_driver_ops *esp_ops;
|
|
};
|
|
|
|
/* board types */
|
|
|
|
enum {
|
|
ZORRO_BLZ1230,
|
|
ZORRO_BLZ1230II,
|
|
ZORRO_BLZ2060,
|
|
ZORRO_CYBER,
|
|
ZORRO_CYBERII,
|
|
ZORRO_FASTLANE,
|
|
};
|
|
|
|
/* per-board config data */
|
|
|
|
static const struct zorro_driver_data zorro_esp_boards[] = {
|
|
[ZORRO_BLZ1230] = {
|
|
.name = "Blizzard 1230",
|
|
.offset = 0x8000,
|
|
.dma_offset = 0x10000,
|
|
.scsi_option = 1,
|
|
.esp_ops = &blz1230_esp_ops,
|
|
},
|
|
[ZORRO_BLZ1230II] = {
|
|
.name = "Blizzard 1230II",
|
|
.offset = 0x10000,
|
|
.dma_offset = 0x10021,
|
|
.scsi_option = 1,
|
|
.esp_ops = &blz1230II_esp_ops,
|
|
},
|
|
[ZORRO_BLZ2060] = {
|
|
.name = "Blizzard 2060",
|
|
.offset = 0x1ff00,
|
|
.dma_offset = 0x1ffe0,
|
|
.esp_ops = &blz2060_esp_ops,
|
|
},
|
|
[ZORRO_CYBER] = {
|
|
.name = "CyberStormI",
|
|
.offset = 0xf400,
|
|
.dma_offset = 0xf800,
|
|
.esp_ops = &cyber_esp_ops,
|
|
},
|
|
[ZORRO_CYBERII] = {
|
|
.name = "CyberStormII",
|
|
.offset = 0x1ff03,
|
|
.dma_offset = 0x1ff43,
|
|
.scsi_option = 1,
|
|
.esp_ops = &cyberII_esp_ops,
|
|
},
|
|
[ZORRO_FASTLANE] = {
|
|
.name = "Fastlane",
|
|
.offset = 0x1000001,
|
|
.dma_offset = 0x1000041,
|
|
.esp_ops = &fastlane_esp_ops,
|
|
},
|
|
};
|
|
|
|
static const struct zorro_device_id zorro_esp_zorro_tbl[] = {
|
|
{ /* Blizzard 1230 IV */
|
|
.id = ZORRO_ID(PHASE5, 0x11, 0),
|
|
.driver_data = ZORRO_BLZ1230,
|
|
},
|
|
{ /* Blizzard 1230 II (Zorro II) or Fastlane (Zorro III) */
|
|
.id = ZORRO_ID(PHASE5, 0x0B, 0),
|
|
.driver_data = ZORRO_BLZ1230II,
|
|
},
|
|
{ /* Blizzard 2060 */
|
|
.id = ZORRO_ID(PHASE5, 0x18, 0),
|
|
.driver_data = ZORRO_BLZ2060,
|
|
},
|
|
{ /* Cyberstorm */
|
|
.id = ZORRO_ID(PHASE5, 0x0C, 0),
|
|
.driver_data = ZORRO_CYBER,
|
|
},
|
|
{ /* Cyberstorm II */
|
|
.id = ZORRO_ID(PHASE5, 0x19, 0),
|
|
.driver_data = ZORRO_CYBERII,
|
|
},
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(zorro, zorro_esp_zorro_tbl);
|
|
|
|
static int zorro_esp_probe(struct zorro_dev *z,
|
|
const struct zorro_device_id *ent)
|
|
{
|
|
const struct scsi_host_template *tpnt = &scsi_esp_template;
|
|
struct Scsi_Host *host;
|
|
struct esp *esp;
|
|
const struct zorro_driver_data *zdd;
|
|
struct zorro_esp_priv *zep;
|
|
unsigned long board, ioaddr, dmaaddr;
|
|
int err;
|
|
|
|
board = zorro_resource_start(z);
|
|
zdd = &zorro_esp_boards[ent->driver_data];
|
|
|
|
pr_info("%s found at address 0x%lx.\n", zdd->name, board);
|
|
|
|
zep = kzalloc(sizeof(*zep), GFP_KERNEL);
|
|
if (!zep) {
|
|
pr_err("Can't allocate device private data!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* let's figure out whether we have a Zorro II or Zorro III board */
|
|
if ((z->rom.er_Type & ERT_TYPEMASK) == ERT_ZORROIII) {
|
|
if (board > 0xffffff)
|
|
zep->zorro3 = 1;
|
|
} else {
|
|
/*
|
|
* Even though most of these boards identify as Zorro II,
|
|
* they are in fact CPU expansion slot boards and have full
|
|
* access to all of memory. Fix up DMA bitmask here.
|
|
*/
|
|
z->dev.coherent_dma_mask = DMA_BIT_MASK(32);
|
|
}
|
|
|
|
/*
|
|
* If Zorro III and ID matches Fastlane, our device table entry
|
|
* contains data for the Blizzard 1230 II board which does share the
|
|
* same ID. Fix up device table entry here.
|
|
* TODO: Some Cyberstom060 boards also share this ID but would need
|
|
* to use the Cyberstorm I driver data ... we catch this by checking
|
|
* for presence of ESP chip later, but don't try to fix up yet.
|
|
*/
|
|
if (zep->zorro3 && ent->driver_data == ZORRO_BLZ1230II) {
|
|
pr_info("%s at address 0x%lx is Fastlane Z3, fixing data!\n",
|
|
zdd->name, board);
|
|
zdd = &zorro_esp_boards[ZORRO_FASTLANE];
|
|
}
|
|
|
|
if (zdd->absolute) {
|
|
ioaddr = zdd->offset;
|
|
dmaaddr = zdd->dma_offset;
|
|
} else {
|
|
ioaddr = board + zdd->offset;
|
|
dmaaddr = board + zdd->dma_offset;
|
|
}
|
|
|
|
if (!zorro_request_device(z, zdd->name)) {
|
|
pr_err("cannot reserve region 0x%lx, abort\n",
|
|
board);
|
|
err = -EBUSY;
|
|
goto fail_free_zep;
|
|
}
|
|
|
|
host = scsi_host_alloc(tpnt, sizeof(struct esp));
|
|
|
|
if (!host) {
|
|
pr_err("No host detected; board configuration problem?\n");
|
|
err = -ENOMEM;
|
|
goto fail_release_device;
|
|
}
|
|
|
|
host->base = ioaddr;
|
|
host->this_id = 7;
|
|
|
|
esp = shost_priv(host);
|
|
esp->host = host;
|
|
esp->dev = &z->dev;
|
|
|
|
esp->scsi_id = host->this_id;
|
|
esp->scsi_id_mask = (1 << esp->scsi_id);
|
|
|
|
esp->cfreq = 40000000;
|
|
|
|
zep->esp = esp;
|
|
|
|
dev_set_drvdata(esp->dev, zep);
|
|
|
|
/* additional setup required for Fastlane */
|
|
if (zep->zorro3 && ent->driver_data == ZORRO_BLZ1230II) {
|
|
/* map full address space up to ESP base for DMA */
|
|
zep->board_base = ioremap(board, FASTLANE_ESP_ADDR - 1);
|
|
if (!zep->board_base) {
|
|
pr_err("Cannot allocate board address space\n");
|
|
err = -ENOMEM;
|
|
goto fail_free_host;
|
|
}
|
|
/* initialize DMA control shadow register */
|
|
zep->ctrl_data = (FASTLANE_DMA_FCODE |
|
|
FASTLANE_DMA_EDI | FASTLANE_DMA_ESI);
|
|
}
|
|
|
|
esp->ops = zdd->esp_ops;
|
|
|
|
if (ioaddr > 0xffffff)
|
|
esp->regs = ioremap(ioaddr, 0x20);
|
|
else
|
|
/* ZorroII address space remapped nocache by early startup */
|
|
esp->regs = ZTWO_VADDR(ioaddr);
|
|
|
|
if (!esp->regs) {
|
|
err = -ENOMEM;
|
|
goto fail_unmap_fastlane;
|
|
}
|
|
|
|
esp->fifo_reg = esp->regs + ESP_FDATA * 4;
|
|
|
|
/* Check whether a Blizzard 12x0 or CyberstormII really has SCSI */
|
|
if (zdd->scsi_option) {
|
|
zorro_esp_write8(esp, (ESP_CONFIG1_PENABLE | 7), ESP_CFG1);
|
|
if (zorro_esp_read8(esp, ESP_CFG1) != (ESP_CONFIG1_PENABLE|7)) {
|
|
err = -ENODEV;
|
|
goto fail_unmap_regs;
|
|
}
|
|
}
|
|
|
|
if (zep->zorro3) {
|
|
/*
|
|
* Only Fastlane Z3 for now - add switch for correct struct
|
|
* dma_registers size if adding any more
|
|
*/
|
|
esp->dma_regs = ioremap(dmaaddr,
|
|
sizeof(struct fastlane_dma_registers));
|
|
} else
|
|
/* ZorroII address space remapped nocache by early startup */
|
|
esp->dma_regs = ZTWO_VADDR(dmaaddr);
|
|
|
|
if (!esp->dma_regs) {
|
|
err = -ENOMEM;
|
|
goto fail_unmap_regs;
|
|
}
|
|
|
|
esp->command_block = dma_alloc_coherent(esp->dev, 16,
|
|
&esp->command_block_dma,
|
|
GFP_KERNEL);
|
|
|
|
if (!esp->command_block) {
|
|
err = -ENOMEM;
|
|
goto fail_unmap_dma_regs;
|
|
}
|
|
|
|
host->irq = IRQ_AMIGA_PORTS;
|
|
err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED,
|
|
"Amiga Zorro ESP", esp);
|
|
if (err < 0) {
|
|
err = -ENODEV;
|
|
goto fail_free_command_block;
|
|
}
|
|
|
|
/* register the chip */
|
|
err = scsi_esp_register(esp);
|
|
|
|
if (err) {
|
|
err = -ENOMEM;
|
|
goto fail_free_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_free_irq:
|
|
free_irq(host->irq, esp);
|
|
|
|
fail_free_command_block:
|
|
dma_free_coherent(esp->dev, 16,
|
|
esp->command_block,
|
|
esp->command_block_dma);
|
|
|
|
fail_unmap_dma_regs:
|
|
if (zep->zorro3)
|
|
iounmap(esp->dma_regs);
|
|
|
|
fail_unmap_regs:
|
|
if (ioaddr > 0xffffff)
|
|
iounmap(esp->regs);
|
|
|
|
fail_unmap_fastlane:
|
|
if (zep->zorro3)
|
|
iounmap(zep->board_base);
|
|
|
|
fail_free_host:
|
|
scsi_host_put(host);
|
|
|
|
fail_release_device:
|
|
zorro_release_device(z);
|
|
|
|
fail_free_zep:
|
|
kfree(zep);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void zorro_esp_remove(struct zorro_dev *z)
|
|
{
|
|
struct zorro_esp_priv *zep = dev_get_drvdata(&z->dev);
|
|
struct esp *esp = zep->esp;
|
|
struct Scsi_Host *host = esp->host;
|
|
|
|
scsi_esp_unregister(esp);
|
|
|
|
free_irq(host->irq, esp);
|
|
dma_free_coherent(esp->dev, 16,
|
|
esp->command_block,
|
|
esp->command_block_dma);
|
|
|
|
if (zep->zorro3) {
|
|
iounmap(zep->board_base);
|
|
iounmap(esp->dma_regs);
|
|
}
|
|
|
|
if (host->base > 0xffffff)
|
|
iounmap(esp->regs);
|
|
|
|
scsi_host_put(host);
|
|
|
|
zorro_release_device(z);
|
|
|
|
kfree(zep);
|
|
}
|
|
|
|
static struct zorro_driver zorro_esp_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = zorro_esp_zorro_tbl,
|
|
.probe = zorro_esp_probe,
|
|
.remove = zorro_esp_remove,
|
|
};
|
|
|
|
static int __init zorro_esp_scsi_init(void)
|
|
{
|
|
return zorro_register_driver(&zorro_esp_driver);
|
|
}
|
|
|
|
static void __exit zorro_esp_scsi_exit(void)
|
|
{
|
|
zorro_unregister_driver(&zorro_esp_driver);
|
|
}
|
|
|
|
module_init(zorro_esp_scsi_init);
|
|
module_exit(zorro_esp_scsi_exit);
|