linux/net/mac80211/ht.c
Johannes Berg 6092077ad0 wifi: mac80211: introduce 'channel request'
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.

Unfortunately,  with EHT this is longer be sufficient,  at
least not for all hardware.  EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA  that specify the position
and bandwidth  for the non-AP STA  relative to the channel
the AP is using.  Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over  two channel contexts where they
differ by the AP being used.

As a first step,  introduce a concept of a channel request
('chanreq') for each interface,  to control the context it
requests.   This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.

Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08 13:07:34 +01:00

619 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* HT handling
*
* Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
* Copyright 2007-2010, Intel Corporation
* Copyright 2017 Intel Deutschland GmbH
* Copyright(c) 2020-2024 Intel Corporation
*/
#include <linux/ieee80211.h>
#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "rate.h"
static void __check_htcap_disable(struct ieee80211_ht_cap *ht_capa,
struct ieee80211_ht_cap *ht_capa_mask,
struct ieee80211_sta_ht_cap *ht_cap,
u16 flag)
{
__le16 le_flag = cpu_to_le16(flag);
if (ht_capa_mask->cap_info & le_flag) {
if (!(ht_capa->cap_info & le_flag))
ht_cap->cap &= ~flag;
}
}
static void __check_htcap_enable(struct ieee80211_ht_cap *ht_capa,
struct ieee80211_ht_cap *ht_capa_mask,
struct ieee80211_sta_ht_cap *ht_cap,
u16 flag)
{
__le16 le_flag = cpu_to_le16(flag);
if ((ht_capa_mask->cap_info & le_flag) &&
(ht_capa->cap_info & le_flag))
ht_cap->cap |= flag;
}
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
struct ieee80211_sta_ht_cap *ht_cap)
{
struct ieee80211_ht_cap *ht_capa, *ht_capa_mask;
u8 *scaps, *smask;
int i;
if (!ht_cap->ht_supported)
return;
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
ht_capa = &sdata->u.mgd.ht_capa;
ht_capa_mask = &sdata->u.mgd.ht_capa_mask;
break;
case NL80211_IFTYPE_ADHOC:
ht_capa = &sdata->u.ibss.ht_capa;
ht_capa_mask = &sdata->u.ibss.ht_capa_mask;
break;
default:
WARN_ON_ONCE(1);
return;
}
scaps = (u8 *)(&ht_capa->mcs.rx_mask);
smask = (u8 *)(&ht_capa_mask->mcs.rx_mask);
/* NOTE: If you add more over-rides here, update register_hw
* ht_capa_mod_mask logic in main.c as well.
* And, if this method can ever change ht_cap.ht_supported, fix
* the check in ieee80211_add_ht_ie.
*/
/* check for HT over-rides, MCS rates first. */
for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
u8 m = smask[i];
ht_cap->mcs.rx_mask[i] &= ~m; /* turn off all masked bits */
/* Add back rates that are supported */
ht_cap->mcs.rx_mask[i] |= (m & scaps[i]);
}
/* Force removal of HT-40 capabilities? */
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
IEEE80211_HT_CAP_SUP_WIDTH_20_40);
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
IEEE80211_HT_CAP_SGI_40);
/* Allow user to disable SGI-20 (SGI-40 is handled above) */
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
IEEE80211_HT_CAP_SGI_20);
/* Allow user to disable the max-AMSDU bit. */
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
IEEE80211_HT_CAP_MAX_AMSDU);
/* Allow user to disable LDPC */
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
IEEE80211_HT_CAP_LDPC_CODING);
/* Allow user to enable 40 MHz intolerant bit. */
__check_htcap_enable(ht_capa, ht_capa_mask, ht_cap,
IEEE80211_HT_CAP_40MHZ_INTOLERANT);
/* Allow user to enable TX STBC bit */
__check_htcap_enable(ht_capa, ht_capa_mask, ht_cap,
IEEE80211_HT_CAP_TX_STBC);
/* Allow user to configure RX STBC bits */
if (ht_capa_mask->cap_info & cpu_to_le16(IEEE80211_HT_CAP_RX_STBC))
ht_cap->cap |= le16_to_cpu(ht_capa->cap_info) &
IEEE80211_HT_CAP_RX_STBC;
/* Allow user to decrease AMPDU factor */
if (ht_capa_mask->ampdu_params_info &
IEEE80211_HT_AMPDU_PARM_FACTOR) {
u8 n = ht_capa->ampdu_params_info &
IEEE80211_HT_AMPDU_PARM_FACTOR;
if (n < ht_cap->ampdu_factor)
ht_cap->ampdu_factor = n;
}
/* Allow the user to increase AMPDU density. */
if (ht_capa_mask->ampdu_params_info &
IEEE80211_HT_AMPDU_PARM_DENSITY) {
u8 n = (ht_capa->ampdu_params_info &
IEEE80211_HT_AMPDU_PARM_DENSITY)
>> IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT;
if (n > ht_cap->ampdu_density)
ht_cap->ampdu_density = n;
}
}
bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata,
struct ieee80211_supported_band *sband,
const struct ieee80211_ht_cap *ht_cap_ie,
struct link_sta_info *link_sta)
{
struct ieee80211_bss_conf *link_conf;
struct sta_info *sta = link_sta->sta;
struct ieee80211_sta_ht_cap ht_cap, own_cap;
u8 ampdu_info, tx_mcs_set_cap;
int i, max_tx_streams;
bool changed;
enum ieee80211_sta_rx_bandwidth bw;
enum nl80211_chan_width width;
memset(&ht_cap, 0, sizeof(ht_cap));
if (!ht_cap_ie || !sband->ht_cap.ht_supported)
goto apply;
ht_cap.ht_supported = true;
own_cap = sband->ht_cap;
/*
* If user has specified capability over-rides, take care
* of that if the station we're setting up is the AP or TDLS peer that
* we advertised a restricted capability set to. Override
* our own capabilities and then use those below.
*/
if (sdata->vif.type == NL80211_IFTYPE_STATION ||
sdata->vif.type == NL80211_IFTYPE_ADHOC)
ieee80211_apply_htcap_overrides(sdata, &own_cap);
/*
* The bits listed in this expression should be
* the same for the peer and us, if the station
* advertises more then we can't use those thus
* we mask them out.
*/
ht_cap.cap = le16_to_cpu(ht_cap_ie->cap_info) &
(own_cap.cap | ~(IEEE80211_HT_CAP_LDPC_CODING |
IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
IEEE80211_HT_CAP_GRN_FLD |
IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_SGI_40 |
IEEE80211_HT_CAP_DSSSCCK40));
/*
* The STBC bits are asymmetric -- if we don't have
* TX then mask out the peer's RX and vice versa.
*/
if (!(own_cap.cap & IEEE80211_HT_CAP_TX_STBC))
ht_cap.cap &= ~IEEE80211_HT_CAP_RX_STBC;
if (!(own_cap.cap & IEEE80211_HT_CAP_RX_STBC))
ht_cap.cap &= ~IEEE80211_HT_CAP_TX_STBC;
ampdu_info = ht_cap_ie->ampdu_params_info;
ht_cap.ampdu_factor =
ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR;
ht_cap.ampdu_density =
(ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2;
/* own MCS TX capabilities */
tx_mcs_set_cap = own_cap.mcs.tx_params;
/* Copy peer MCS TX capabilities, the driver might need them. */
ht_cap.mcs.tx_params = ht_cap_ie->mcs.tx_params;
/* can we TX with MCS rates? */
if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED))
goto apply;
/* Counting from 0, therefore +1 */
if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF)
max_tx_streams =
((tx_mcs_set_cap & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1;
else
max_tx_streams = IEEE80211_HT_MCS_TX_MAX_STREAMS;
/*
* 802.11n-2009 20.3.5 / 20.6 says:
* - indices 0 to 7 and 32 are single spatial stream
* - 8 to 31 are multiple spatial streams using equal modulation
* [8..15 for two streams, 16..23 for three and 24..31 for four]
* - remainder are multiple spatial streams using unequal modulation
*/
for (i = 0; i < max_tx_streams; i++)
ht_cap.mcs.rx_mask[i] =
own_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i];
if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION)
for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE;
i < IEEE80211_HT_MCS_MASK_LEN; i++)
ht_cap.mcs.rx_mask[i] =
own_cap.mcs.rx_mask[i] &
ht_cap_ie->mcs.rx_mask[i];
/* handle MCS rate 32 too */
if (own_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1)
ht_cap.mcs.rx_mask[32/8] |= 1;
/* set Rx highest rate */
ht_cap.mcs.rx_highest = ht_cap_ie->mcs.rx_highest;
if (ht_cap.cap & IEEE80211_HT_CAP_MAX_AMSDU)
link_sta->pub->agg.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_HT_7935;
else
link_sta->pub->agg.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_HT_3839;
ieee80211_sta_recalc_aggregates(&sta->sta);
apply:
changed = memcmp(&link_sta->pub->ht_cap, &ht_cap, sizeof(ht_cap));
memcpy(&link_sta->pub->ht_cap, &ht_cap, sizeof(ht_cap));
rcu_read_lock();
link_conf = rcu_dereference(sdata->vif.link_conf[link_sta->link_id]);
if (WARN_ON(!link_conf))
width = NL80211_CHAN_WIDTH_20_NOHT;
else
width = link_conf->chanreq.oper.width;
switch (width) {
default:
WARN_ON_ONCE(1);
fallthrough;
case NL80211_CHAN_WIDTH_20_NOHT:
case NL80211_CHAN_WIDTH_20:
bw = IEEE80211_STA_RX_BW_20;
break;
case NL80211_CHAN_WIDTH_40:
case NL80211_CHAN_WIDTH_80:
case NL80211_CHAN_WIDTH_80P80:
case NL80211_CHAN_WIDTH_160:
case NL80211_CHAN_WIDTH_320:
bw = ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20;
break;
}
rcu_read_unlock();
link_sta->pub->bandwidth = bw;
link_sta->cur_max_bandwidth =
ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20;
if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
enum ieee80211_smps_mode smps_mode;
switch ((ht_cap.cap & IEEE80211_HT_CAP_SM_PS)
>> IEEE80211_HT_CAP_SM_PS_SHIFT) {
case WLAN_HT_CAP_SM_PS_INVALID:
case WLAN_HT_CAP_SM_PS_STATIC:
smps_mode = IEEE80211_SMPS_STATIC;
break;
case WLAN_HT_CAP_SM_PS_DYNAMIC:
smps_mode = IEEE80211_SMPS_DYNAMIC;
break;
case WLAN_HT_CAP_SM_PS_DISABLED:
smps_mode = IEEE80211_SMPS_OFF;
break;
}
if (smps_mode != link_sta->pub->smps_mode)
changed = true;
link_sta->pub->smps_mode = smps_mode;
} else {
link_sta->pub->smps_mode = IEEE80211_SMPS_OFF;
}
return changed;
}
void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta,
enum ieee80211_agg_stop_reason reason)
{
int i;
lockdep_assert_wiphy(sta->local->hw.wiphy);
for (i = 0; i < IEEE80211_NUM_TIDS; i++)
__ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_LEAVE_QBSS,
reason != AGG_STOP_DESTROY_STA &&
reason != AGG_STOP_PEER_REQUEST);
for (i = 0; i < IEEE80211_NUM_TIDS; i++)
__ieee80211_stop_tx_ba_session(sta, i, reason);
/*
* In case the tear down is part of a reconfigure due to HW restart
* request, it is possible that the low level driver requested to stop
* the BA session, so handle it to properly clean tid_tx data.
*/
if(reason == AGG_STOP_DESTROY_STA) {
wiphy_work_cancel(sta->local->hw.wiphy, &sta->ampdu_mlme.work);
for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
struct tid_ampdu_tx *tid_tx =
rcu_dereference_protected_tid_tx(sta, i);
if (!tid_tx)
continue;
if (test_and_clear_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state))
ieee80211_stop_tx_ba_cb(sta, i, tid_tx);
}
}
}
void ieee80211_ba_session_work(struct wiphy *wiphy, struct wiphy_work *work)
{
struct sta_info *sta =
container_of(work, struct sta_info, ampdu_mlme.work);
struct tid_ampdu_tx *tid_tx;
bool blocked;
int tid;
lockdep_assert_wiphy(sta->local->hw.wiphy);
/* When this flag is set, new sessions should be blocked. */
blocked = test_sta_flag(sta, WLAN_STA_BLOCK_BA);
for (tid = 0; tid < IEEE80211_NUM_TIDS; tid++) {
if (test_and_clear_bit(tid, sta->ampdu_mlme.tid_rx_timer_expired))
__ieee80211_stop_rx_ba_session(
sta, tid, WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_TIMEOUT, true);
if (test_and_clear_bit(tid,
sta->ampdu_mlme.tid_rx_stop_requested))
__ieee80211_stop_rx_ba_session(
sta, tid, WLAN_BACK_RECIPIENT,
WLAN_REASON_UNSPECIFIED, true);
if (!blocked &&
test_and_clear_bit(tid,
sta->ampdu_mlme.tid_rx_manage_offl))
__ieee80211_start_rx_ba_session(sta, 0, 0, 0, 1, tid,
IEEE80211_MAX_AMPDU_BUF_HT,
false, true, NULL);
if (test_and_clear_bit(tid + IEEE80211_NUM_TIDS,
sta->ampdu_mlme.tid_rx_manage_offl))
__ieee80211_stop_rx_ba_session(
sta, tid, WLAN_BACK_RECIPIENT,
0, false);
spin_lock_bh(&sta->lock);
tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
if (!blocked && tid_tx) {
struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
struct ieee80211_sub_if_data *sdata =
vif_to_sdata(txqi->txq.vif);
struct fq *fq = &sdata->local->fq;
spin_lock_bh(&fq->lock);
/* Allow only frags to be dequeued */
set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
if (!skb_queue_empty(&txqi->frags)) {
/* Fragmented Tx is ongoing, wait for it to
* finish. Reschedule worker to retry later.
*/
spin_unlock_bh(&fq->lock);
spin_unlock_bh(&sta->lock);
/* Give the task working on the txq a chance
* to send out the queued frags
*/
synchronize_net();
wiphy_work_queue(sdata->local->hw.wiphy, work);
return;
}
spin_unlock_bh(&fq->lock);
/*
* Assign it over to the normal tid_tx array
* where it "goes live".
*/
sta->ampdu_mlme.tid_start_tx[tid] = NULL;
/* could there be a race? */
if (sta->ampdu_mlme.tid_tx[tid])
kfree(tid_tx);
else
ieee80211_assign_tid_tx(sta, tid, tid_tx);
spin_unlock_bh(&sta->lock);
ieee80211_tx_ba_session_handle_start(sta, tid);
continue;
}
spin_unlock_bh(&sta->lock);
tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
if (!tid_tx)
continue;
if (!blocked &&
test_and_clear_bit(HT_AGG_STATE_START_CB, &tid_tx->state))
ieee80211_start_tx_ba_cb(sta, tid, tid_tx);
if (test_and_clear_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state))
__ieee80211_stop_tx_ba_session(sta, tid,
AGG_STOP_LOCAL_REQUEST);
if (test_and_clear_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state))
ieee80211_stop_tx_ba_cb(sta, tid, tid_tx);
}
}
void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
const u8 *da, u16 tid,
u16 initiator, u16 reason_code)
{
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u16 params;
skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
if (!skb)
return;
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt = skb_put_zero(skb, 24);
memcpy(mgmt->da, da, ETH_ALEN);
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->deflink.u.mgd.bssid, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
mgmt->u.action.category = WLAN_CATEGORY_BACK;
mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA;
params = (u16)(initiator << 11); /* bit 11 initiator */
params |= (u16)(tid << 12); /* bit 15:12 TID number */
mgmt->u.action.u.delba.params = cpu_to_le16(params);
mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
ieee80211_tx_skb(sdata, skb);
}
void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_mgmt *mgmt, size_t len)
{
u16 tid, params;
u16 initiator;
params = le16_to_cpu(mgmt->u.action.u.delba.params);
tid = (params & IEEE80211_DELBA_PARAM_TID_MASK) >> 12;
initiator = (params & IEEE80211_DELBA_PARAM_INITIATOR_MASK) >> 11;
ht_dbg_ratelimited(sdata, "delba from %pM (%s) tid %d reason code %d\n",
mgmt->sa, initiator ? "initiator" : "recipient",
tid,
le16_to_cpu(mgmt->u.action.u.delba.reason_code));
if (initiator == WLAN_BACK_INITIATOR)
__ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_INITIATOR, 0,
true);
else
__ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_PEER_REQUEST);
}
enum nl80211_smps_mode
ieee80211_smps_mode_to_smps_mode(enum ieee80211_smps_mode smps)
{
switch (smps) {
case IEEE80211_SMPS_OFF:
return NL80211_SMPS_OFF;
case IEEE80211_SMPS_STATIC:
return NL80211_SMPS_STATIC;
case IEEE80211_SMPS_DYNAMIC:
return NL80211_SMPS_DYNAMIC;
default:
return NL80211_SMPS_OFF;
}
}
int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
enum ieee80211_smps_mode smps, const u8 *da,
const u8 *bssid, int link_id)
{
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *action_frame;
struct ieee80211_tx_info *info;
u8 status_link_id = link_id < 0 ? 0 : link_id;
/* 27 = header + category + action + smps mode */
skb = dev_alloc_skb(27 + local->hw.extra_tx_headroom);
if (!skb)
return -ENOMEM;
skb_reserve(skb, local->hw.extra_tx_headroom);
action_frame = skb_put(skb, 27);
memcpy(action_frame->da, da, ETH_ALEN);
memcpy(action_frame->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(action_frame->bssid, bssid, ETH_ALEN);
action_frame->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
action_frame->u.action.category = WLAN_CATEGORY_HT;
action_frame->u.action.u.ht_smps.action = WLAN_HT_ACTION_SMPS;
switch (smps) {
case IEEE80211_SMPS_AUTOMATIC:
case IEEE80211_SMPS_NUM_MODES:
WARN_ON(1);
smps = IEEE80211_SMPS_OFF;
fallthrough;
case IEEE80211_SMPS_OFF:
action_frame->u.action.u.ht_smps.smps_control =
WLAN_HT_SMPS_CONTROL_DISABLED;
break;
case IEEE80211_SMPS_STATIC:
action_frame->u.action.u.ht_smps.smps_control =
WLAN_HT_SMPS_CONTROL_STATIC;
break;
case IEEE80211_SMPS_DYNAMIC:
action_frame->u.action.u.ht_smps.smps_control =
WLAN_HT_SMPS_CONTROL_DYNAMIC;
break;
}
/* we'll do more on status of this frame */
info = IEEE80211_SKB_CB(skb);
info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
/* we have 12 bits, and need 6: link_id 4, smps 2 */
info->status_data = IEEE80211_STATUS_TYPE_SMPS |
u16_encode_bits(status_link_id << 2 | smps,
IEEE80211_STATUS_SUBDATA_MASK);
ieee80211_tx_skb_tid(sdata, skb, 7, link_id);
return 0;
}
void ieee80211_request_smps(struct ieee80211_vif *vif, unsigned int link_id,
enum ieee80211_smps_mode smps_mode)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
struct ieee80211_link_data *link;
if (WARN_ON_ONCE(vif->type != NL80211_IFTYPE_STATION))
return;
rcu_read_lock();
link = rcu_dereference(sdata->link[link_id]);
if (WARN_ON(!link))
goto out;
trace_api_request_smps(sdata->local, sdata, link, smps_mode);
if (link->u.mgd.driver_smps_mode == smps_mode)
goto out;
link->u.mgd.driver_smps_mode = smps_mode;
wiphy_work_queue(sdata->local->hw.wiphy,
&link->u.mgd.request_smps_work);
out:
rcu_read_unlock();
}
/* this might change ... don't want non-open drivers using it */
EXPORT_SYMBOL_GPL(ieee80211_request_smps);