linux/drivers/parisc/wax.c
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00

136 lines
3.0 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* WAX Device Driver
*
* (c) Copyright 2000 The Puffin Group Inc.
*
* by Helge Deller <deller@gmx.de>
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include "gsc.h"
#define WAX_GSC_IRQ 7 /* Hardcoded Interrupt for GSC */
static void wax_choose_irq(struct parisc_device *dev, void *ctrl)
{
int irq;
switch (dev->id.sversion) {
case 0x73: irq = 1; break; /* i8042 General */
case 0x8c: irq = 6; break; /* Serial */
case 0x90: irq = 10; break; /* EISA */
default: return; /* Unknown */
}
gsc_asic_assign_irq(ctrl, irq, &dev->irq);
switch (dev->id.sversion) {
case 0x73: irq = 2; break; /* i8042 High-priority */
case 0x90: irq = 0; break; /* EISA NMI */
default: return; /* No secondary IRQ */
}
gsc_asic_assign_irq(ctrl, irq, &dev->aux_irq);
}
static void __init
wax_init_irq(struct gsc_asic *wax)
{
unsigned long base = wax->hpa;
/* Wax-off */
gsc_writel(0x00000000, base+OFFSET_IMR);
/* clear pending interrupts */
gsc_readl(base+OFFSET_IRR);
/* We're not really convinced we want to reset the onboard
* devices. Firmware does it for us...
*/
/* Resets */
// gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */
// gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */
}
static int __init wax_init_chip(struct parisc_device *dev)
{
struct gsc_asic *wax;
struct parisc_device *parent;
struct gsc_irq gsc_irq;
int ret;
wax = kzalloc(sizeof(*wax), GFP_KERNEL);
if (!wax)
return -ENOMEM;
wax->name = "wax";
wax->hpa = dev->hpa.start;
wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */
printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
/* Stop wax hissing for a bit */
wax_init_irq(wax);
/* the IRQ wax should use */
dev->irq = gsc_claim_irq(&gsc_irq, WAX_GSC_IRQ);
if (dev->irq < 0) {
printk(KERN_ERR "%s(): cannot get GSC irq\n",
__func__);
kfree(wax);
return -EBUSY;
}
wax->eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "wax", wax);
if (ret < 0) {
kfree(wax);
return ret;
}
/* enable IRQ's for devices below WAX */
gsc_writel(wax->eim, wax->hpa + OFFSET_IAR);
/* Done init'ing, register this driver */
ret = gsc_common_setup(dev, wax);
if (ret) {
kfree(wax);
return ret;
}
gsc_fixup_irqs(dev, wax, wax_choose_irq);
/* On 715-class machines, Wax EISA is a sibling of Wax, not a child. */
parent = parisc_parent(dev);
if (parent->id.hw_type != HPHW_IOA) {
gsc_fixup_irqs(parent, wax, wax_choose_irq);
}
return ret;
}
static const struct parisc_device_id wax_tbl[] __initconst = {
{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008e },
{ 0, }
};
MODULE_DEVICE_TABLE(parisc, wax_tbl);
struct parisc_driver wax_driver __refdata = {
.name = "wax",
.id_table = wax_tbl,
.probe = wax_init_chip,
};