linux/arch/arm/mach-ixp23xx/core.c
Thomas Gleixner f38c02f3b3 arm: Fold irq_set_chip/irq_set_handler
Use irq_set_chip_and_handler() instead. Converted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:47:58 +02:00

447 lines
11 KiB
C

/*
* arch/arm/mach-ixp23xx/core.c
*
* Core routines for IXP23xx chips
*
* Author: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright 2005 (c) MontaVista Software, Inc.
*
* Based on 2.4 code Copyright 2004 (c) Intel Corporation
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
/*************************************************************************
* Chip specific mappings shared by all IXP23xx systems
*************************************************************************/
static struct map_desc ixp23xx_io_desc[] __initdata = {
{ /* XSI-CPP CSRs */
.virtual = IXP23XX_XSI2CPP_CSR_VIRT,
.pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
.length = IXP23XX_XSI2CPP_CSR_SIZE,
.type = MT_DEVICE,
}, { /* Expansion Bus Config */
.virtual = IXP23XX_EXP_CFG_VIRT,
.pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
.length = IXP23XX_EXP_CFG_SIZE,
.type = MT_DEVICE,
}, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
.virtual = IXP23XX_PERIPHERAL_VIRT,
.pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
.length = IXP23XX_PERIPHERAL_SIZE,
.type = MT_DEVICE,
}, { /* CAP CSRs */
.virtual = IXP23XX_CAP_CSR_VIRT,
.pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
.length = IXP23XX_CAP_CSR_SIZE,
.type = MT_DEVICE,
}, { /* MSF CSRs */
.virtual = IXP23XX_MSF_CSR_VIRT,
.pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
.length = IXP23XX_MSF_CSR_SIZE,
.type = MT_DEVICE,
}, { /* PCI I/O Space */
.virtual = IXP23XX_PCI_IO_VIRT,
.pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
.length = IXP23XX_PCI_IO_SIZE,
.type = MT_DEVICE,
}, { /* PCI Config Space */
.virtual = IXP23XX_PCI_CFG_VIRT,
.pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
.length = IXP23XX_PCI_CFG_SIZE,
.type = MT_DEVICE,
}, { /* PCI local CFG CSRs */
.virtual = IXP23XX_PCI_CREG_VIRT,
.pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
.length = IXP23XX_PCI_CREG_SIZE,
.type = MT_DEVICE,
}, { /* PCI MEM Space */
.virtual = IXP23XX_PCI_MEM_VIRT,
.pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
.length = IXP23XX_PCI_MEM_SIZE,
.type = MT_DEVICE,
}
};
void __init ixp23xx_map_io(void)
{
iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
}
/***************************************************************************
* IXP23xx Interrupt Handling
***************************************************************************/
enum ixp23xx_irq_type {
IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
};
static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
static int ixp23xx_irq_set_type(struct irq_data *d, unsigned int type)
{
int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
u32 int_style;
enum ixp23xx_irq_type irq_type;
volatile u32 *int_reg;
/*
* Only GPIOs 6-15 are wired to interrupts on IXP23xx
*/
if (line < 6 || line > 15)
return -EINVAL;
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP23XX_IRQ_EDGE;
break;
case IRQ_TYPE_EDGE_RISING:
int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP23XX_IRQ_EDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP23XX_IRQ_EDGE;
break;
case IRQ_TYPE_LEVEL_HIGH:
int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP23XX_IRQ_LEVEL;
break;
case IRQ_TYPE_LEVEL_LOW:
int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP23XX_IRQ_LEVEL;
break;
default:
return -EINVAL;
}
ixp23xx_config_irq(d->irq, irq_type);
if (line >= 8) { /* pins 8-15 */
line -= 8;
int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
} else { /* pins 0-7 */
int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
}
/*
* Clear pending interrupts
*/
*IXP23XX_GPIO_GPISR = (1 << line);
/* Clear the style for the appropriate pin */
*int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
(line * IXP23XX_GPIO_STYLE_SIZE));
/* Set the new style */
*int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
return 0;
}
static void ixp23xx_irq_mask(struct irq_data *d)
{
volatile unsigned long *intr_reg;
unsigned int irq = d->irq;
if (irq >= 56)
irq += 8;
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg &= ~(1 << (irq % 32));
}
static void ixp23xx_irq_ack(struct irq_data *d)
{
int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
if ((line < 6) || (line > 15))
return;
*IXP23XX_GPIO_GPISR = (1 << line);
}
/*
* Level triggered interrupts on GPIO lines can only be cleared when the
* interrupt condition disappears.
*/
static void ixp23xx_irq_level_unmask(struct irq_data *d)
{
volatile unsigned long *intr_reg;
unsigned int irq = d->irq;
ixp23xx_irq_ack(d);
if (irq >= 56)
irq += 8;
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg |= (1 << (irq % 32));
}
static void ixp23xx_irq_edge_unmask(struct irq_data *d)
{
volatile unsigned long *intr_reg;
unsigned int irq = d->irq;
if (irq >= 56)
irq += 8;
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg |= (1 << (irq % 32));
}
static struct irq_chip ixp23xx_irq_level_chip = {
.irq_ack = ixp23xx_irq_mask,
.irq_mask = ixp23xx_irq_mask,
.irq_unmask = ixp23xx_irq_level_unmask,
.irq_set_type = ixp23xx_irq_set_type
};
static struct irq_chip ixp23xx_irq_edge_chip = {
.irq_ack = ixp23xx_irq_ack,
.irq_mask = ixp23xx_irq_mask,
.irq_unmask = ixp23xx_irq_edge_unmask,
.irq_set_type = ixp23xx_irq_set_type
};
static void ixp23xx_pci_irq_mask(struct irq_data *d)
{
unsigned int irq = d->irq;
*IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
}
static void ixp23xx_pci_irq_unmask(struct irq_data *d)
{
unsigned int irq = d->irq;
*IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
}
/*
* TODO: Should this just be done at ASM level?
*/
static void pci_handler(unsigned int irq, struct irq_desc *desc)
{
u32 pci_interrupt;
unsigned int irqno;
pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
desc->irq_data.chip->irq_ack(&desc->irq_data);
/* See which PCI_INTA, or PCI_INTB interrupted */
if (pci_interrupt & (1 << 26)) {
irqno = IRQ_IXP23XX_INTB;
} else if (pci_interrupt & (1 << 27)) {
irqno = IRQ_IXP23XX_INTA;
} else {
BUG();
}
generic_handle_irq(irqno);
desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
static struct irq_chip ixp23xx_pci_irq_chip = {
.irq_ack = ixp23xx_pci_irq_mask,
.irq_mask = ixp23xx_pci_irq_mask,
.irq_unmask = ixp23xx_pci_irq_unmask
};
static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
{
switch (type) {
case IXP23XX_IRQ_LEVEL:
irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip,
handle_level_irq);
break;
case IXP23XX_IRQ_EDGE:
irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip,
handle_edge_irq);
break;
}
set_irq_flags(irq, IRQF_VALID);
}
void __init ixp23xx_init_irq(void)
{
int irq;
/* Route everything to IRQ */
*IXP23XX_INTR_SEL1 = 0x0;
*IXP23XX_INTR_SEL2 = 0x0;
*IXP23XX_INTR_SEL3 = 0x0;
*IXP23XX_INTR_SEL4 = 0x0;
/* Mask all sources */
*IXP23XX_INTR_EN1 = 0x0;
*IXP23XX_INTR_EN2 = 0x0;
*IXP23XX_INTR_EN3 = 0x0;
*IXP23XX_INTR_EN4 = 0x0;
/*
* Configure all IRQs for level-sensitive operation
*/
for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
}
for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip,
handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
}
/*************************************************************************
* Timer-tick functions for IXP23xx
*************************************************************************/
#define CLOCK_TICKS_PER_USEC (CLOCK_TICK_RATE / USEC_PER_SEC)
static unsigned long next_jiffy_time;
static unsigned long
ixp23xx_gettimeoffset(void)
{
unsigned long elapsed;
elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
return elapsed / CLOCK_TICKS_PER_USEC;
}
static irqreturn_t
ixp23xx_timer_interrupt(int irq, void *dev_id)
{
/* Clear Pending Interrupt by writing '1' to it */
*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
timer_tick();
next_jiffy_time += LATCH;
}
return IRQ_HANDLED;
}
static struct irqaction ixp23xx_timer_irq = {
.name = "IXP23xx Timer Tick",
.handler = ixp23xx_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
};
void __init ixp23xx_init_timer(void)
{
/* Clear Pending Interrupt by writing '1' to it */
*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
/* Setup the Timer counter value */
*IXP23XX_TIMER1_RELOAD =
(LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
*IXP23XX_TIMER_CONT = 0;
next_jiffy_time = LATCH;
/* Connect the interrupt handler and enable the interrupt */
setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
}
struct sys_timer ixp23xx_timer = {
.init = ixp23xx_init_timer,
.offset = ixp23xx_gettimeoffset,
};
/*************************************************************************
* IXP23xx Platform Initialization
*************************************************************************/
static struct resource ixp23xx_uart_resources[] = {
{
.start = IXP23XX_UART1_PHYS,
.end = IXP23XX_UART1_PHYS + 0x0fff,
.flags = IORESOURCE_MEM
}, {
.start = IXP23XX_UART2_PHYS,
.end = IXP23XX_UART2_PHYS + 0x0fff,
.flags = IORESOURCE_MEM
}
};
static struct plat_serial8250_port ixp23xx_uart_data[] = {
{
.mapbase = IXP23XX_UART1_PHYS,
.membase = (char *)(IXP23XX_UART1_VIRT + 3),
.irq = IRQ_IXP23XX_UART1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP23XX_UART_XTAL,
}, {
.mapbase = IXP23XX_UART2_PHYS,
.membase = (char *)(IXP23XX_UART2_VIRT + 3),
.irq = IRQ_IXP23XX_UART2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP23XX_UART_XTAL,
},
{ },
};
static struct platform_device ixp23xx_uart = {
.name = "serial8250",
.id = 0,
.dev.platform_data = ixp23xx_uart_data,
.num_resources = 2,
.resource = ixp23xx_uart_resources,
};
static struct platform_device *ixp23xx_devices[] __initdata = {
&ixp23xx_uart,
};
void __init ixp23xx_sys_init(void)
{
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
}